Items where Year is 2015

Group by: Creators | Item Type | No Grouping

Number of items: 1122.

Article

Muhammad Aswin, Bashar S Mohammed, Mohammad Shahir Liew, Zubair (2015) Shear Failure of RC Dapped-End Beams. Shear Failure of RC Dapped-End Beams. (Submitted)

Habib, K and K Assadi, M and Zainudin, M H B (2015) Study of Solar Driven Silica gel-Water based Adsorption Chiller. Materials Science and Engineering: A, 88. ISSN 0921-5093

Hassan, Rohail and Marimuthu, Maran and Kaur Johl, Satirenjit (2015) Diversity, Corporate Governance and Implication on Firm Financial Performance. Diversity, Corporate Governance and Implication on Firm Financial Performance, 7 (2). pp. 28-35. ISSN 1947-5667

., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, M Rafi Raza (2015) THERMAL CONDUCTIVITY OF POWDER INJECTION MOLDED CARBON NANOTUBE-REINFORCED COPPER-MATRIX COMPOSITES. THERMAL CONDUCTIVITY OF POWDER INJECTION MOLDED CARBON NANOTUBE-REINFORCED COPPER-MATRIX COMPOSITES.

., Edwar Yazid, Mohd Shahir Liew, Setyamartana Parman, Velluruzhati (2015) Identification of slow drift motions of a truss spar platform using parametric Volterra model. Identification of slow drift motions of a truss spar platform using parametric Volterra model.

., Edwar Yazid, Mohd Shahir Liew, Setyamartana Parman, Velluruzhati (2015) Improving the modeling capacity of Volterra model using evolutionary computing methods based on Kalman Smoother adaptive filter. Edwar Yazid, Mohd Shahir Liew, Setyamartana Parman, Velluruzhatil John Kurian. (Submitted)

., Irfan Shirazi, Faiz Ahmad, M Rafi Raza, Ali S Muhsan, M Aslam (2015) Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding. Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding. (Submitted)

., Liyana Rosely, Abdul Halim Abdul Latiff (2015) Fracture Network Correlation Analysis of Meta-Sediment Outcrop in Terengganu Coastline and Malay Basin. Fracture Network Correlation Analysis of Meta-Sediment Outcrop in Terengganu Coastline and Malay Basin.

., Mehboob Khatani, Norani Muti Mohamed, Nor Hisham Hamid, Ali Same (2015) Effect of photoanode thickness on electrochemical performance of dye sensitized solar cell. Effect of photoanode thickness on electrochemical performance of dye sensitized solar cell. (Submitted)

., Muhammad Rafi Raza, Faiz Ahmad, Norhamidi Muhamad, Abu Bakar Sul (2015) Effects of residual carbon on microstructure and surface roughness of PIM 316L stainless steel. Effects of residual carbon on microstructure and surface roughness of PIM 316L stainless steel.

., NH Mardi, MA Malek, MS Liew, HE Lee (2015) A Conceptual Review of Tsunami Models Based on Sumatera-Andaman Tsunami Event. A Conceptual Review of Tsunami Models Based on Sumatera-Andaman Tsunami Event. (Submitted)

., NH Mardi, MS Liew, MA Malek, MN Abdullah (2015) Tsunami Forecasting Due to Seismic Activity in Manila Trench of Malaysia Offshore Oil Blocks. Tsunami Forecasting Due to Seismic Activity in Manila Trench of Malaysia Offshore Oil Blocks. (Submitted)

., VJ Kurian, AM Al-Yacouby, AA Sebastian, MS Liew, VG Idichandy (2015) Effect of Sacrificial Anodes and Marine Growth on Hydrodynamic Coefficients of Rigid Cylinders. Effect of Sacrificial Anodes and Marine Growth on Hydrodynamic Coefficients of Rigid Cylinders. (Submitted)

A H Abdul Latiff, D P Ghosh, S N F Jamaludin, . (2015) Structural Enhancement in Shallow Gas Cloud Region Structural Enhancement in Shallow Gas Cloud Region. Structural Enhancement in Shallow Gas Cloud Region Structural Enhancement in Shallow Gas Cloud Region.

Abbas, M.A. and Wan Ahmad, W.F. and Kalid, K.S. (2015) A semantic web based framework for preschool cognitive skills tutoring system. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17758-17765.

Abbas, T. and Kallidanthiyil Chellappan, L. and Mutalib, M.I.A. and Cheun, K.Y. and Nasir Shah, S. and Nazir, S. and Hassan, A. and Abai, M.B. and Khan, E. (2015) Stability and Performance of Physically Immobilized Ionic Liquids for Mercury Adsorption from a Gas Stream. Industrial and Engineering Chemistry Research, 54 (48). pp. 12114-12123.

Abbasi, A.Z. and Jamak, A.B.S.A. (2015) A conceptual model: Video-game engagement and its moderating impact on consumersâ�� personality. Advanced Science Letters, 21 (5). pp. 1216-1220.

Abbasi, I. and Ali, S.S.A. and Ovinis, M. and Naeem, W. (2015) Adaptive identification of underwater glider using U-model for depth & pitch control under hydrodynamic disturbances. Jurnal Teknologi, 74 (9). pp. 113-118.

Abdalla, M.O. and Nagarajan, T. (2015) A computational study of the actuation speed of the hydraulic cylinder under different portsâ�� sizes and configurations. Journal of Engineering Science and Technology, 10 (2). pp. 160-173.

Abdel-Aty, A.-H. and Zakaria, N. and Cheong, L.Y. and Metwally, N. (2015) Entanglement and teleportation via partial entangled-state quantum network. Journal of Computational and Theoretical Nanoscience, 12 (9). pp. 2213-2220.

Abdul Halim, Hairul N and M. Shariff, Azmi and Tan, Lian S and Bustam, Mohammad A (2015) Mass transfer performance of CO2 absorption from natural gas using monoethanolamine (MEA) in high pressure operations. Industrial & Engineering Chemistry Research, 54 (5). pp. 1675-1680.

Abdul Halim, H.N. and Shariff, A.M. and Tan, L.S. and Bustam, M.A. (2015) Mass transfer performance of CO2 absorption from natural gas using monoethanolamine (MEA) in high pressure operations. Industrial and Engineering Chemistry Research, 54 (5). pp. 1675-1680.

Abdul Majid, N.D. and Mohd Shariff, A. and Rusli, R. (2015) Process Safety Management (PSM) for managing contractors in process plant. Journal of Loss Prevention in the Process Industries, 37. pp. 82-90.

Abdul Rahim, R.H. and Rahmiati, T. and Azizli, K.A. and Man, Z. and Nuruddin, M.F. and Ismail, L. (2015) Comparison of using NaOH and KOH activated fly ash-based geopolymer on the mechanical properties. Materials Science Forum, 803. pp. 179-184.

Abdullah, M.A. and Afzaal, M. and Ismail, Z. and Ahmad, A. and Nazir, M.S. and Bhat, A.H. (2015) Comparative study on structural modification of Ceiba pentandra for oil sorption and palm oil mill effluent treatment. Desalination and Water Treatment, 54 (11). pp. 3044-3053.

Abdullah, M.R.T.L. and Siraj, S. and Yean, L.L. (2015) Perception of undergraduates on their language competence based on english language national examination results. Pertanika Journal of Social Sciences and Humanities, 23 (August). pp. 55-72.

Abid, S.A. and Othman, M. and Shah, N. and Sabir, O. and Khan, A.U.R. and Ali, M. and Shafi, J. and Ullah, S. (2015) Merging of DHT-based logical networks in MANETs. Transactions on Emerging Telecommunications Technologies, 26 (12). pp. 1347-1367.

Abidin, Ma Umaira Suhaddha Zainal and Mukhtar, Hilmi and Shaharun, MS (2015) Effect of pH on Flux and Rejection for Diglycolamine and Triethanolamine. Chemical Engineering Transactions, 45. pp. 1429-1434.

Abidin, M.U.S.Z. and Mukhtar, H. and Shaharun, M.S. (2015) Effect of pH on flux and rejection for diglycolamine and triethanolamine. Chemical Engineering Transactions, 45. pp. 1429-1434.

Adam, I.K. and Aziz, A.R.A. and Yusup, S. (2015) Determination of diesel engine performance fueled biodiesel (Rubber seed/palm oil mixture) diesel blend. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2675-2685.

Adeyemi, B.J. and Sulaimon, A.A. (2015) Investigating the kinetics of water-in-crude oil emulsion stability. ARPN Journal of Engineering and Applied Sciences, 10 (16). pp. 7131-7136.

Afrooz, I.E. and Ã�chsner, A. (2015) Effect of the carbon nanotube distribution on the thermal conductivity of composite materials. Journal of Heat Transfer, 137 (3).

Aftab, Asma and Shariff, A and Shaikh, M and Lal, Bhajan and Garg, Sahil and Abd Aziz, Nor Faiqa Bt (2015) Measurement and prediction of density, viscosity and refractive index of aqueous potassium β-alaninate. Aust J Basic Appl Sci, 9 (36). pp. 556-561.

Ahmad, Faizan and Lau, Kok Keon and Lock, Serene Sow Mu and Rafiq, Sikander and Khan, Asad Ullah and Lee, Moonyong (2015) Hollow fiber membrane model for gas separation: Process simulation, experimental validation and module characteristics study. Journal of Industrial and Engineering Chemistry, 21. pp. 1246-1257.

Ahmad, NNR and Mukhtar, H and Man, Z and Mohshim, DF (2015) Synthesis and characterization of EDA-functionalized polyethersulfone/SAPO-34 mixed matrix membrane. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6192-6195.

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2015) Aerobic and anaerobic co-cultivation of Nannochloropsis oculata with oil palm empty fruit bunch for enhanced biomethane production and palm oil mill effluent treatment. Desalination and Water Treatment, 56 (8). pp. 2055-2065.

Ahmad, A.H. and Mahmood, A.K. and Jaafar, J. (2015) The architecture of fuzzy agent in rescuer monitoring system. American Journal of Engineering and Applied Sciences, 8 (3). pp. 345-353.

Ahmad, Junaid and Malik, Aamir Saeed and Abdullah, Mohd Faris and Kamel, Nidal S. and Xia, Likun (2015) A novel method for vegetation encroachment monitoring of transmission lines using a single 2D camera. Pattern Analysis and Applications.

Ahmad, N.N.R. and Mukhtar, H. and Man, Z. and Mohshim, D.F. (2015) Synthesis and characterization of EDA-functionalized polyethersulfone/SAPO-34 mixed matrix membrane. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6192-6195.

Ahmed, M.O. and Yenduri, A. and Kurian, V.J. (2015) Investigation on the dynamic responses of a truss spar platform for different mooring line groups. Journal of Marine Science and Application, 14 (2). pp. 189-195.

Ahmed, S. and Kaur Johl, S. and Bin Abdul Jamak, A.B.S. and Mohamed Noor, A.B. (2015) Mind the purchasersâ�� disturbance: Exploring planned purchasersâ�� influences. Advanced Science Letters, 21 (5). pp. 1381-1384.

Ahmed Mohamed Ahmed Salim, Osama Akhtar Janjua, Ali Wahid, Aruba, . (2015) Linear Regression Approach for Porosity and Permeability Calculations from Well Logs: A Case Study in NW Bonaparte Basin, Australia. Linear Regression Approach for Porosity and Permeability Calculations from Well Logs: A Case Study in NW Bonaparte Basin, Australia.

Ahsanullah and Sulaiman, S. and Mahmood, A.K.B. and Khan, M. (2015) Understanding factors influencing User Experience of interactive systems: A literature review. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 18175-18185.

Ahsanullah and Sulaiman, S. and Mahmood, A.K.B. and Khan, M. and Madni, M. (2015) Applications of multi-touch tabletop displays and their challenging issues: An overview. International Journal on Smart Sensing and Intelligent Systems, 8 (2). pp. 966-991.

Aissaoui, T. and Alnashef, I.M. and Hayyan, M. and Hashim, M.A. (2015) Erratum: Neoteric FT-IR investigation on the functional groups of phosphonium-based deep eutectic solvents (Spectrochim. Acta Part A: Mol. Biomol. Spectrosc. (2015) 149 (588-591) DOI: 10.1016/j.saa.2015.05.001 PII: S1386142515005892). Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy, 149. R1.

Aissaoui, T. and Alnashef, I.M. and Hayyan, M. and Hashim, M.A. (2015) Neoteric FT-IR investigation on the functional groups of phosphonium-based deep eutectic solvents. Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy, 149. pp. 588-591.

Akhtar, S. and Kurnia, J.C. and Shamim, T. (2015) A three-dimensional computational model of H2-air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application. Applied Energy, 152. pp. 47-57.

Al Jameli, Marwan and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2015) An Energy Efficient Cross-Layer Network Operation Model For IEEE 802.15.4-Based Mobile Wireless Sensor Networks. IEEE Sensors Journal, 15 (2). pp. 684-692. ISSN 1530-437X

Al Riza, D.F. and Gilani, S.I.U.H. and Aris, M.S. (2015) Standalone photovoltaic systems sizing optimization using design space approach: Case study for residential lighting load. Journal of Engineering Science and Technology, 10 (7). pp. 943-957.

Al-Jemeli, M. and Hussin, F.A. (2015) An energy efficient cross-layer network operation model for IEEE 802.15.4-based mobile wireless sensor networks. IEEE Sensors Journal, 15 (2). pp. 684-692.

Al-Kayiem, H.H. and Heng, Y.M. (2015) Experimental investigation of rooftop solar chimney for natural ventilation. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10249-10254.

Al-Kayiem, Hussain H. and Yassen, Tadahmun A. (2015) ON THE NATURAL CONVECTION HEAT TRANSFER IN A RECTANGULAR PASSAGE SOLAR AIR HEATER. solar energy, 112. pp. 310-318.

Al-Waked, R. and Nasif, M.S. and Morrison, G. and Behnia, M. (2015) CFD simulation of air to air enthalpy heat exchanger: Variable membrane moisture resistance. Applied Thermal Engineering, 84. pp. 301-309.

Aldabbagh, G. and Hasbullah, H. and Verma, K. and Bamasak, O. (2015) Space-efficient and accurate forwarding loop detection method using Bloom-filter for fast and reliable internet routing. Journal of Theoretical and Applied Information Technology, 79 (3). pp. 456-475.

Aleem, W and Mellon, N and Sufian, S and Mutalib, MIA and Subbarao, D (2015) A model for the estimation of surface tension of pure hydrocarbon liquids. Petroleum Science and Technology, 33 (23-24). pp. 1908-1915.

Aleem, W and Mellon, N and Sufian, S and Mutalib, MIA and Subbarao, D (2015) A model for the estimation of viscosity of pure hydrocarbon liquids. Petroleum Science and Technology, 33 (21-22). pp. 1815-1821.

Aleem, W. and Mellon, N. and Sufian, S. and Mutalib, M.I.A. and Subbarao, D. (2015) A Model for the Estimation of Surface Tension of Pure Hydrocarbon Liquids. Petroleum Science and Technology, 33 (23-24). pp. 1908-1915.

Alhussian, Hitham and Zakaria, Nordin and Hussin, Fawnizu Azmadi (2015) Minimizing Scheduling Overhead In LRE-TL Real-Time Multiprocessor Scheduling Algorithm. Turkish Journal of Electrical Engineering & Computer Sciences. pp. 1-15. ISSN 1303-6203

Ali, A. and Farooq, M.U. and Naz, M.Y. and Qayyum, A. and Khan, Y. and Ghaffar, A. and Shukrullah, S. (2015) Symmetric tungsten triple probe diagnostic for time resolved measurements in plasma discharge. International Journal of Applied Electromagnetics and Mechanics, 49 (2). pp. 289-298.

Ali, A.S.O. and Asirvadam, V.S. and Malik, A.S. and Eltoukhy, M.M. and Aziz, A. (2015) Age-Invariant Face Recognition Using Triangle Geometric Features. International Journal of Pattern Recognition and Artificial Intelligence, 29 (5).

Ali, A.S.O. and Sagayan, V. and Saeed, A.M. and Ameen, H. and Aziz, A. (2015) Age-invariant face recognition system using combined shape and texture features. IET Biometrics, 4 (2). pp. 98-115.

Ali, E.M. and Yahaya, N.Z. and Perumal, N. and Zakariya, M.A. (2015) Design and development of harvester RECTENNA at GSM band for battery charging applications. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10206-10212.

Ali, S.M. and Zakariya, M.A. and Baharudin, Z. and Adz, J.J. and Jilani, M.T. and Ain, M.F. and Ahmad, Z.A. (2015) Parametric study of Cylindrical Dielectric Resonator Antenna (CDRA) feeder with symmetric parabolic reflector. Research Journal of Applied Sciences, Engineering and Technology, 10 (6). pp. 607-617.

Altaf, K. and Rani, A.M.B.A. (2015) Numerical study of profiled conformal cooling channels for cooling time reduction in injection mould tools. International Journal of Engineering Systems Modelling and Simulation, 7 (4). pp. 230-237.

Amin, H.U. and Malik, A.S. and Ahmad, R.F. and Badruddin, N. and Kamel, N. and Hussain, M. and Chooi, W.-T. (2015) Feature extraction and classification for EEG signals using wavelet transform and machine learning techniques. Australasian Physical and Engineering Sciences in Medicine, 38 (1). pp. 139-149.

Amin, H.U. and Malik, A.S. and Kamel, N. and Chooi, W.-T. and Hussain, M. (2015) P300 correlates with learning & memory abilities and fluid intelligence. Journal of NeuroEngineering and Rehabilitation, 12 (1).

Amin, Hafeez Ullah and Malik, Aamir Saeed and Ahmad, Rana Fayyaz and Badruddin , Nasreen and Kamel, Nidal S. and Hussain, Muhammad and Chooi, Weng-Tink (2015) Feature extraction and classification for EEG signals using wavelet transform and machine learning techniques. Australasian Physical and Engineering Sciences in Medicine. ISSN 1879-5447

Amin, Hafeez Ullah and Malik, Aamir Saeed and Kamel, Nidal S. and Chooi, Weng-Tink and Hussain, Mohammad (2015) P300 correlates with learning & memory abilities and fluid intelligence. JOURNAL OF NEUROENGINEERING AND REHABILITATION.

Amin, M.M. and Yusup, S. (2015) Transesterification via direct-ultrasonic irradiation of rubber seed oil with waste materials based heterogeneous catalyst. Chemical Engineering Transactions, 45. pp. 1267-1272.

Anggraeni, Silvia and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2015) Review of Single Cycle Shifter for Structured LDPC Encoder. Applied Mechanics and Materials, 763. ISSN 1660-9336

Ani, Z.C. and Sarlan, A. (2015) Validating reusability of software projects using object-oriented design metrics. Lecture Notes in Electrical Engineering, 339. pp. 845-850.

Aniza, N. and Hassan, S. and Nor, M.F.M. and Kee, K.E. and Aklilu, T. (2015) Investigation of thermal degradation of poultry processing dewatered sludge using thermogravimetric analysis method. Jurnal Teknologi, 76 (5). pp. 7-10.

Ansari, S. and Gonzalez, J.P. and Otero, P. and Ansari, A. (2015) Analysis of MAC Strategies for Underwater Applications. Wireless Personal Communications, 85 (2). pp. 359-376.

Araki, Shota and Wakabayashi, Rie and Moniruzzaman, Muhammad and Kamiya, Noriho and Goto, Masahiro (2015) Ionic liquid-mediated transcutaneous protein delivery with solid-in-oil nanodispersions. MedChemComm, 6 (12). pp. 2124-2128.

Armi, N. and Yusoff, M.Z. and Saad, N.M. (2015) Decentralized multiuser cooperative spectrum sensing in cognitive radio system. International Journal on Electrical Engineering and Informatics, 7 (3). pp. 418-428.

Asadpour, R. and Sapari, N.B. and Isa, M.H. and Kakooei, S. and Orji, K.U. (2015) Acetylation of corn silk and its application for oil sorption. Fibers and Polymers, 16 (9). pp. 1830-1835.

Asif, A. and Man, Z. and Mohd Azizli, K.A. and Nuruddin, M.F. and Ismail, L. (2015) The effect of Si/Al ratio and sodium silicate on the mechanical properties of fly ash based geopolymer for coating. Materials Science Forum, 803. pp. 355-361.

Askury Abd Kadir, Mohd Razlan Abdul Rahman, Choong Chee Meng, Fa, . (2015) Characterization and modelling of naturally fractured granites in the Redang Island, Terengganu, Malaysia. Characterization and modelling of naturally fractured granites in the Redang Island, Terengganu, Malaysia.

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Prediction of RC beams failure load using non-linear finite element analysis. International Journal of Applied Engineering Research, 10 (22). pp. 42974-42980.

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Root cause of reinforced concrete dapped-end beams failure. International Journal of Applied Engineering Research, 10 (22). pp. 42927-42933.

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Shear Failure of RC Dapped-End Beams. Advances in Materials Science and Engineering, 2015.

Awang, A. and Agarwal, S. (2015) Data Aggregation Using Dynamic Selection of Aggregation Points Based on RSSI for Wireless Sensor Networks. Wireless Personal Communications, 80 (2). pp. 611-633.

Awang, M. and Raza, S.K. and Yahaya, M.S.A. (2015) Microstructure and hardness investigation of different welding passes in weld zones. Materialwissenschaft und Werkstofftechnik, 46 (4-5). pp. 492-497.

Ayman N Qadrouh*, Jose’M Carcione, Ahmed Salim, Zuhar Harith, . (2015) Best Fitting of NMO Equations and Depth Conversion. Best Fitting of NMO Equations and Depth Conversion.

Ayman Qadrouh, José M Carcione, Ahmed M Salim, Zuhar Zahir Tuan , . (2015) Attenuation effects on the seismic response of a bottom-simulating reflector. Attenuation effects on the seismic response of a bottom-simulating reflector.

Ayman Qadrouh, José M Carcione, Ahmed M Salim, Zuhar Zahir Tuan , . (2015) Journal of Natural Gas Science and Engineering. Journal of Natural Gas Science and Engineering.

Ayoub, Muhammad and Inayat, Abrar and Rashid, Umer and Ullah, Sami and Lal, Bhajan (2015) Synthesis of stable lithium modified mesoporous catalyst for oligomerization of biodisel-drive glycerol to diglycerol. Chemical Engineering Transactions, 45. pp. 1291-1296.

Ayoub, M. and Inayat, A. and Rashid, U. and Ullah, S. and Lal, B. (2015) Synthesis of stable lithium modified mesoporous catalyst for oligomerization of biodisel-drive glycerol to diglycerol. Chemical Engineering Transactions, 45. pp. 1291-1296.

Ayoub, M.A. and Shabib-Asl, A. and AbdellahiZein, A.M. and Elraies, K.A. and MohdSaaid, I.B. (2015) Recovery optimization of an oil reservoir by water flooding under different scenarios; a simulation approach. Research Journal of Applied Sciences, Engineering and Technology, 10 (4). pp. 357-372.

Azarpour, A. and Nejad Ghaffar Borhani, T. and Wan Alwi, S.R. and Abdul Manan, Z. and Madooli Behbehani, M. (2015) Prediction of Pd/C Catalyst Deactivation Rate and Assessment of Optimal Operating Conditions of Industrial Hydropurification Process. Industrial and Engineering Chemistry Research, 54 (28). pp. 7067-7082.

Baharudin, Z. and Rehman, M.U.Z. and Zakariya, M.A. and Khir, M.H.M. and Khan, M.T. and Adz, J.J. (2015) Bowtie shaped substrate integrated waveguide bandpass filter. Lecture Notes in Electrical Engineering, 315. pp. 365-373.

Baheta, A.T. and Emad, M.A. (2015) Parametric analysis of carbon dioxide transcritical and supercritical power cycles using low grade heat source. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10169-10173.

Baheta, Aklilu Tesfamichael (2015) Parametric analysis of carbon dioxide transcritical and supercritical power cycles using low grade heat source. ARPN Journal of Engineering and Applied Sciences, 10 (21). ISSN 1819-6608

Bahloul, M.R. and Yusoff, M.Z. and Saad, M.N.M. (2015) Efficient and low complexity modulation classification algorithm for MIMO systems. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 58-64.

Bajeh, A.O. and Basri, S. and Jung, L.T. (2015) An empirical validation of coupling and cohesion metrics as testability indicators. Lecture Notes in Electrical Engineering, 339. pp. 915-922.

Bakar, Z.A. and Abdullah, M.R.T.L. (2015) Importance of correct pronunciation in spoken english: Dimension of second language learners' perspective. Pertanika Journal of Social Sciences and Humanities, 23 (August). pp. 143-158.

Bakhsh, S.T. and Aman Sheikh, M. and Alghamdi, R. (2015) Self-Schedule and Self-Distributive MAC Scheduling Algorithms for Next-Generation Sensor Networks. International Journal of Distributed Sensor Networks, 2015.

Balogun, A.-L. and Matori, A.-N. and Hamid-Mosaku, A.I. (2015) A fuzzy multi-criteria decision support system for evaluating subsea oil pipeline routing criteria in East Malaysia. Environmental Earth Sciences, 74 (6). pp. 4875-4884.

Bamatraf, Saeed and Hussain, Muhammad and Aboalsamh, Hatim and Qazi, Emad-Ul-Haq and Malik, Aamir Saeed and Amin, Hafeez Ullah and Mathkour, Hassan and Muhammad, Ghulam and Muhammad, Hafiz Imran (2015) A System for True and False Memory Prediction based on 2D and 3D Educational Contents and EEG Brain Signals. Computational Intelligence and Neuroscience. (In Press)

Ban, ZH and Lau, KK and Shariff, AM (2015) Prediction of the bubble nucleation rate in a quasi-stable cavitating nozzle using 2D computational fluid dynamics and enhanced classical nucleation theory. Engineering applications of computational fluid mechanics, 9 (1). pp. 247-258.

Bashiri, Robabeh and Mohamed, Norani Muti and Kait, Chong Fai and Sufian, Suriati (2015) Hydrogen production from water photosplitting using Cu/TiO2 nanoparticles: Effect of hydrolysis rate and reaction medium. International Journal of Hydrogen Energy, 40 (18). pp. 6021-6037.

Bayuaji, R. and Nuruddin, M.F. and Francis, S. and Ekaputri, J.J. and Triwulan and Junaedi, S. and Fansuri, H. (2015) Mechanical properties of MIRHA-fly ash geopolymer concrete. Materials Science Forum, 803. pp. 49-57.

Ben Ghanem, O. and Mutalib, M.I.A. and LÃ©veÃ®que, J.-M. and Gonfa, G. and Kait, C.F. and El-Harbawi, M. (2015) Studies on the Physicochemical Properties of Ionic Liquids Based On 1-Octyl-3-methylimidazolium Amino Acids. Journal of Chemical and Engineering Data, 60 (6). pp. 1756-1763.

Besrour, S. and Rahim, L.B.A. and Dominic, P.D.D. (2015) Exploratory study to assess and evaluate requirement specification techniques using analysis determination requirements framework. Research Journal of Applied Sciences, Engineering and Technology, 9 (3). pp. 165-171.

Bhattacharjee, S. and Rahim, L.B.A. and Aziz, I.B.A. (2015) Enhancement of confidentiality and integrity during big data transmission using a hybrid technique. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 18029-18038.

Bhattacharyya, E. and Zainal, A.Z. (2015) What do students and engineers have to say about communicative competence in technical oral presentations? Pertanika Journal of Social Sciences and Humanities, 23 (August). pp. 123-142.

Binjuwair, Saud and Mohamad, Taib Iskandar and Almaleki, Ahmed and Alkudsi, Abdullah and Alshunaifi, Ibrahim (2015) The effects of research octane number and fuel systems on the performance and emissions of a spark ignition engine: A study on Saudi Arabian RON91 and RON95 with port injection and direct injection systems. Fuel, 158. pp. 351-360.

Bokhari, A. and Chuah, L.F. and Yusup, S. and Ahmad, J. and Shamsuddin, M.R. and Teng, M.K. (2015) Microwave-assisted methyl esters synthesis of Kapok (Ceiba pentandra) seed oil: Parametric and optimization study. Biofuel Research Journal, 2 (3). pp. 281-287.

Borhani, T.N.G. and Azarpour, A. and Akbari, V. and Wan Alwi, S.R. and Manan, Z.A. (2015) CO2 capture with potassium carbonate solutions: A state-of-the-art review. International Journal of Greenhouse Gas Control, 41. pp. 142-162.

Bou-Rabee, M.A. and Sulaiman, S.A. and Choe, G. and Han, D. and Saeed, T. and Marafie, S. (2015) Characteristics of solar energy radiation on typical summer and winter days in Kuwait. International Journal of Automotive and Mechanical Engineering, 12 (1). pp. 2944-2953.

Brahim-Belhaouari, S. and Hassan, M. and Walter, N. and Bermak, A. (2015) Advanced statistical metrics for gas identification system with quantification feedback. IEEE Sensors Journal, 15 (3). pp. 1705-1715.

Chai, Y.H. and Yusup, S. and Chok, V.S. (2015) A review on nanoparticle addition in base fluid for improvement of biodegradable ester-based drilling fluid properties. Chemical Engineering Transactions, 45. pp. 1447-1452.

Chakraborty, Anirban and Ahmad, Tausif and Abdullah, Bawadi B and Bhattacharjee, Sekhar (2015) Process engineering studies on synthesis of gold nanoparticles by turkevitch method. Chemical Engineering Transactions, 45. pp. 1939-1944.

Chakraborty, A. and Ahmad, T. and Abdullah, B.B. and Bhattacharjee, S. (2015) Process engineering studies on synthesis of gold nanoparticles by Turkevitch method. Chemical Engineering Transactions, 45. pp. 1939-1944.

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. and Abdullah, W.A.K.W. (2015) Effects of cooling regime on the formation of voids in statically cooled waxy crude oil. International Journal of Multiphase Flow, 77. pp. 187-195.

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. and Kamil Wan Abdullah, W.A. (2015) Study on influence of flow rates on voids in waxy crude oil subjected to dynamic and static cooling. Journal of Mechanical Engineering and Sciences, 9. pp. 1587-1594.

Chan, Y.H. and Yusup, S. and Quitain, A.T. and Tan, R.R. and Sasaki, M. and Lam, H.L. and Uemura, Y. (2015) Effect of process parameters on hydrothermal liquefaction of oil palm biomass for bio-oil production and its life cycle assessment. Energy Conversion and Management, 104. pp. 180-188.

Chandio, Zubair A and Ramasamy, M and Mukhtar, Hilmi B (2015) Temperature effects on solubility of asphaltenes in crude oils. Chemical Engineering Research and Design, 94. pp. 573-583.

Che Mansor, M.F. and Cheng, E.M. and Zakaria, Z. and Abdul Malek, M.F. and Chik, A. and Rojan, M.A. and Zahid, L. and Abu Bakar, S. and Mohd Nasir, N.F. and Khor, S.F. and Beh, H.G. (2015) Microwave absorption analysis on recycled glass doped with Ferum (II, III) Oxide (Fe2O3). International Journal of Mechanical and Mechatronics Engineering, 15 (5). pp. 1-13.

Cheab, S. and Wong, P.W. (2015) Design and synthesis of quasi dual-mode, elliptic coaxial filter. Radioengineering, 24 (3). pp. 795-799.

Cheab, S. and Wong, P.W. and Chew, X.Y. (2015) Parallel Connected Dual-Mode Filter. IEEE Microwave and Wireless Components Letters, 25 (9). pp. 582-584.

Chin, S.C. and Shafiq, N. and Nuruddin, M.F. (2015) FRP as strengthening material for Reinforced Concrete beams with openings â�� A review. KSCE Journal of Civil Engineering, 19 (1). pp. 213-219.

Choong Chee Meng, Askury Abd Kadir, Siti Nur Fathiyah Jamaludin, . (2015) KLEDANG FAULT: A STRIKE-SLIP FAULT? KLEDANG FAULT: A STRIKE-SLIP FAULT?.

Choong Chee Meng, Manuel Pubellier, . (2015) Geological Structures of the Kinta Valley Revisited Using Drainage Anomalies. Geological Structures of the Kinta Valley Revisited Using Drainage Anomalies.

Chua, Lin Kiat and Jusoh, Norwahyu and Yeong, Yin Fong (2015) JOURNAL OF APPLIED SCIENCE AND AGRICULTURE.

Chuah, Lai Fatt and Aziz, Abdul Rashid Abd and Yusup, Suzana and Bokhari, Awais and Kleme\v, Ji\v\'ı Jarom\'ır and Abdullah, Mohd Zamri (2015) Performance and emission of diesel engine fuelled by waste cooking oil methyl ester derived from palm olein using hydrodynamic cavitation. Clean Technologies and Environmental Policy, 17. pp. 2229-2241.

Chuah, L.F. and Yusup, S. and Abd Aziz, A.R. and Bokhari, A. and KlemeÅ¡, J.J. and Abdullah, M.Z. (2015) Intensification of biodiesel synthesis from waste cooking oil (Palm Olein) in a Hydrodynamic Cavitation Reactor: Effect of operating parameters on methyl ester conversion. Chemical Engineering and Processing: Process Intensification, 95. pp. 235-240.

Chung, K.W. and Sum, C.W. and Rahman, Abd.H.A. (2015) Stratigraphic succession and depositional framework of the Sandakan formation, Sabah. Sains Malaysiana, 44 (7). pp. 931-940.

Dan-Mallam, Y. and Abdullah, M.Z. and Yusoff, P.S.M.M. (2015) Mechanical properties of short and continuous kenaf/PET fibre reinforced polyoxymethylene composite. Advanced Composites Letters, 24 (4). pp. 81-91.

Dennis, J.-O. and Ahmed, A.-Y. and Khir, M.-H. (2015) Fabrication and characterization of a CMOS-MEMS humidity sensor. Sensors (Switzerland), 15 (7). pp. 16674-16687.

Dennis, J.O. and Ahmad, F. and Md Khir, M.B. and Hamid, N.H.B. (2015) Optical characterization of lorentz force based CMOS-MEMS magnetic field sensor. Sensors (Switzerland), 15 (8). pp. 18256-18269.

Dennis, J.O. and Rabih, A.A.S. and Md Khir, M.H. and Abdullah, M.A. and Ahmed, M.G.A. (2015) Review on exhaled hydrogen peroxide as a potential biomarker for diagnosis of inflammatory lung diseases. Journal of Biomimetics, Biomaterials and Biomedical Engineering, 22. pp. 77-87.

Dewangan, S. and Gangopadhyay, S. and Biswas, C.K. (2015) Study of surface integrity and dimensional accuracy in EDM using Fuzzy TOPSIS and sensitivity analysis. Measurement: Journal of the International Measurement Confederation, 63. pp. 364-376.

Doraiselvan, K. and Yusup, S. and Wai, C.K. and Muda, N.S. (2015) Optimization studies on catalytic pyrolysis of empty fruit bunch (EFB) using L9 Taguchi Orthogonal Array. Chemical Engineering Transactions, 45. pp. 1639-1644.

Dutta, A. and Banerjee, P. and Sarkar, D. and Bhattacharjee, S. and Chakrabarti, S. (2015) Degradation of Trypan Blue in wastewater by sunlight-assisted modified photo-Fenton reaction. Desalination and Water Treatment, 56 (6). pp. 1498-1506.

Ee, L.K. and Zamin, N. and Aziz, I.A. and Haron, N.S. and Mehat, M. and Ismail, N.N. (2015) Bedrunn3R: An intelligent running alarm clock. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17890-17898.

Eisakhani, M. and Abdullah, M.P. and Karim, O.A. and Malakahmad, A. (2015) Best management practices for water quality improvement of Bertam River, Malaysia. International Journal of Applied Engineering Research, 10 (2). pp. 3923-3935.

Elkhalifah, Ali EI and Bustam, M Azmi and Shariff, AM and Murugesan, T (2015) Selective adsorption of CO2 on a regenerable amine-bentonite hybrid adsorbent. Applied Clay Science, 107. pp. 213-219.

Elraies, K.A. and Kalwar, S.A. and Ayoub, M.A. and Belhaj, H.A. (2015) Experimental investigation of alkali-surfactant-polymer flooding forcarbonate reservoirs. International Journal of Applied Engineering Research, 10 (11). pp. 28401-28410.

Endut, M.N.A.-A. and Nur Arfah, A.S. (2015) The islamic epistemological element of Al-Yaqin in critical thinking. Pertanika Journal of Social Sciences and Humanities, 23 (August). pp. 91-102.

Ezechi, E.H. and Hasnain Isa, M. and Kutty, S.R.B.M. and Ahmed, Z. (2015) Electrochemical removal of boron from produced water and recovery. Journal of Environmental Chemical Engineering, 3 (3). pp. 1962-1973.

Ezechi, E.H. and Kutty, S.R.B.M. and Malakahmad, A. and Isa, M.H. (2015) Characterization and optimization of effluent dye removal using a new low cost adsorbent: Equilibrium, kinetics and thermodynamic study. Process Safety and Environmental Protection, 98. pp. 16-32.

Farnam, Marjan and Mukhtar, Hilmi and Shariff, Azmi (2015) Investigation of optimum drying conditions for pure PES membranes for gas separation. Adv Environ Biol, 9 (27). pp. 326-331.

Farooq, M.U. and Ali, A. and Qayyum, A. and Naz, M.Y. and Khan, Y. and Shukrullah, S. and Ghaffar, C.A. (2015) Time function triple Langmuir probe measurements in low frequency pulsed DC discharge plasma. High Energy Chemistry, 49 (4). pp. 286-293.

Financie, Revie and Moniruzzaman, Muhammad and Uemura, Yoshimitsu (2015) Characterization of Empty Fruit Bunch Treated with Ionic Liquid Prior to Enzymatic Delignification. Jurnal Rekayasa Kimia & Lingkungan, 10 (4). pp. 165-170.

Firmansyah and Aziz, A.R.A. (2015) Investigation of auto-ignition of octane-CNG mixture in HCCI engine. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2235-2242.

Fuddoly, A. and Jaafar, J. and Zamin, N. (2015) News classification with human annotators: A case study. Jurnal Teknologi, 74 (10). pp. 21-28.

Fujita, M. and LÃ©vÃªque, J.-M. and Komatsu, N. and Kimura, T. (2015) Sono-bromination of aromatic compounds based on the ultrasonic advanced oxidation processes. Ultrasonics Sonochemistry, 27. pp. 247-251.

Ganesan, T. and Elamvazuthi, I. and Vasant, P. (2015) Multiobjective design optimization of a nano-CMOS voltage-controlled oscillator using game theoretic-differential evolution. Applied Soft Computing Journal, 32. pp. 293-299.

Gardezi, S.S.S. and Shafiq, N. and Abdullah, N.A.W. and Khamidi, M.F. and Farhan, S.A. (2015) Minimization of embodied carbon footprint from housing sector of Malaysia. Chemical Engineering Transactions, 45. pp. 1927-1932.

Garg, Sahil and Shariff, Azmi Mohd and Shaikh, MS and Lal, Bhajan and Aftab, Asma and Faiqa, Nor (2015) A neural network approach to predict the density of aqueous MEA solution. Australian Journal of Basic and Applied Sciences, 9. pp. 415-422.

Gasim, H. and Megat, A.R.M.M.A. and Shamsul, R.M.K. (2015) Treatment of petroleum refinery wastewater using extended aeration activated sludge. International Journal of Engineering Research in Africa, 13. pp. 1-7.

Getu, Mesfin and Mahadzir, Shuhaimi and Samyudia, Yudi and Khan, Mohd Shariq and Bahadori, Alireza and Lee, Moonyong (2015) Risk-based optimization for representative natural gas liquid (NGL) recovery processes by considering uncertainty from the plant inlet. Journal of Natural Gas Science and Engineering, 27. pp. 42-54.

Getu, M. and Mahadzir, S. and Samyudia, Y. and Khan, M.S. and Bahadori, A. and Lee, M. (2015) Risk-based optimization for representative natural gas liquid (NGL) recovery processes by considering uncertainty from the plant inlet. Journal of Natural Gas Science and Engineering, 27. pp. 42-54.

Ghanem, O.B. and Mutalib, M. and El-Harbawi, M. and Gonfa, G. and Kait, C.F. and Alitheen, N.B.M. and LÃ©vÃªque, J.-M. (2015) Effect of imidazolium-based ionic liquids on bacterial growth inhibition investigated via experimental and QSAR modelling studies. Journal of Hazardous Materials, 297. pp. 198-206.

Gholami, Z. and Abdullah, A.Z. and Lee, K.T. (2015) Catalytic Etherification of Glycerol to Diglycerol Over Heterogeneous Calcium-Based Mixed-Oxide Catalyst: Reusability and Stability. Chemical Engineering Communications, 202 (10). pp. 1397-1405.

Gilani, S.F.-H. and Gilani, S.I.-H. and Baharudin, Z. and Ibrahim, R. (2015) Development of energy harvesting system using rotation mechanism of a revolving door. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10159-10163.

Gilassi, S. and Rahmanian, N. (2015) Mathematical modelling and numerical simulation of CO2/CH4 separation in a polymeric membrane. Applied Mathematical Modelling, 39 (21). pp. 6599-6611.

Gillani, S.A. and Shah, P.A. and Qayyum, A. and Hasbullah, H.B. (2015) MAC layer challenges and proposed protocols for vehicular ad-hoc networks. Advances in Intelligent Systems and Computing, 306. pp. 3-13.

Gitan, A.A. and Abdulmalek, S.H. and Dihrab, S.S. (2015) Tracking collector consideration of tilted collector solar updraft tower power plant under Malaysia climate conditions. Energy, 93. pp. 1467-1477.

Goh Thian Lai, Abdul Ghani Rafek, Ailie Sofyiana Serasa, Norbert, . (2015) Correlation of ultrasonic velocity slowness with uniaxial compressive strength of schists in Malaysia. Correlation of ultrasonic velocity slowness with uniaxial compressive strength of schists in Malaysia.

Gonfa, G. and Bustam, M.A. and Muhammad, N. and Khan, A.S. (2015) Evaluation of Thermophysical Properties of Functionalized Imidazolium Thiocyanate Based Ionic Liquids. Industrial and Engineering Chemistry Research, 54 (49). pp. 12428-12437.

Gonfa, G. and Bustam, M.A. and Sharif, A.M. and Mohamad, N. and Ullah, S. (2015) Tuning ionic liquids for natural gas dehydration using COSMO-RS methodology. Journal of Natural Gas Science and Engineering, 27. pp. 1141-1148.

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2015) Investigation of deposit formation in direct-injection spark-ignition engine powered on syngas. International Journal of Automotive Technology, 16 (3). pp. 479-485.

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2015) Methane enrichment of syngas (H2/CO) in a spark-ignition directinjection engine: Combustion, performance and emissions comparison with syngas and Compressed Natural Gas. Energy, 90. pp. 2006-2015.

Hakro, M.R. and Harahap, I.S.H. (2015) Flume experiments for investigation of rainfall-induced slope failure. International Journal of Engineering Research in Africa, 16. pp. 49-56.

Haleem, A.A. and Hashim, H. and Varbanov, P.S. and Yong, J.Y. and KlemeÅ¡, J.J. and Yusup, S. (2015) Case study: Optimisation of Federal Land Development Authority Jengka supply chain management using P-graph approach. Chemical Engineering Transactions, 45. pp. 1375-1380.

Halim, HNA and Shariff, AM and Bustam, MA (2015) High pressure CO2 absorption from natural gas using piperazine promoted 2-amino-2-methyl-1-propanol in a packed absorption column. Separation and Purification Technology, 152. pp. 87-93.

Halim, H.N.A. and Shariff, A.M. and Bustam, M.A. (2015) High pressure CO2 absorption from natural gas using piperazine promoted 2-amino-2-methyl-1-propanol in a packed absorption column. Separation and Purification Technology, 152. pp. 87-93.

Hamizol, M.S. and Megat-Yusoff, P.S.M. (2015) Tensile strength of single continuous fiber extracted from mengkuang leaves. Jurnal Teknologi, 76 (3). pp. 101-107.

Hamzah, H.I. and Jung, L.T. and Mutalib, A.A. (2015) Prevention of digital music file duplication. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 427-435.

Hani, AM and Feng, Ying Xing and Tang, Tong Boon and Kiguchi, Masashi (2015) The effect of working memory load on prefrontal cortex activation: An optical topography study. ARPN Journal of Engineering and Applied Sciences, 10 (20). pp. 9846-9852.

Hani, A.F.M. and Kumar, D. and Malik, A.S. and Ahmad, R.M.K.R. and Razak, R. and Kiflie, A. (2015) Non-invasive and in vivo assessment of osteoarthritic articular cartilage: A review on MRI investigations. Rheumatology International, 35 (1).

Hani, A.M. and Feng, Y.X. and Tang, T.B. and Kiguchi, M. (2015) The effect of working memory load on prefrontal cortex activation: An optical topography study. ARPN Journal of Engineering and Applied Sciences, 10 (20). pp. 9846-9852.

Hanita, D. and Nurul Fauzana, I.G. and Nursyarizal, M.N. and Taib, I. (2015) A zigbee-based continuous online vital sign monitoring system. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 391-395.

Harun, N.Y. and Afzal, M.T. (2015) Chemical and mechanical properties of pellets made from agricultural and woody biomass blends. Transactions of the ASABE, 58 (4). pp. 921-930.

Harun, N.Y. and Afzal, M.T. (2015) Combustion behavior and thermal analysis of agricultural and woody biomass blends. Advances in Environmental Biology, 9 (15). pp. 34-40.

Hasan, K.N.M. and Mohamad, A.S. (2015) Modeling and simulation of modal analysis-based technique on UTP distribution network for evaluating harmonic resonances. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10255-10263.

Hassan, K. and Abdullah, A. (2015) Modeling the economic impacts of oil production in sudan: An empirical analysis for productive sectors. Advanced Science Letters, 21 (6). pp. 2166-2168.

Hassan, N.H. and Arshad, N.I. and Mustapha, E.E. (2015) A preliminary study on learning orientation, information technology infrastructure flexibility and agility. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17816-17823.

Hassan, R. and Marimuthu, M. and Johl, S.K. (2015) Ethnic diversity on boards and market performance: An empirical investigation in Malaysia. Advanced Science Letters, 21 (5). pp. 1099-1103.

Hassan, S. and Khosravi, A. and Jaafar, J. (2015) Examining performance of aggregation algorithms for neural network-based electricity demand forecasting. International Journal of Electrical Power and Energy Systems, 64. pp. 1098-1105.

Haylay Tsegab Gebretsadik, Chow Weng Sum, Aaron W Hunter, . (2015) Preservation of Marine Chemical Signatures in Upper Devonian Carbonates of Kinta Valley, Peninsular Malaysia: Implications for Chemostratigraphy. Preservation of Marine Chemical Signatures in Upper Devonian Carbonates of Kinta Valley, Peninsular Malaysia: Implications for Chemostratigraphy.

Hegde, G. and Abdul Manaf, S.A. and Kumar, A. and Ali, G.A.M. and Chong, K.F. and Ngaini, Z. and Sharma, K.V. (2015) Biowaste Sago Bark Based Catalyst Free Carbon Nanospheres: Waste to Wealth Approach. ACS Sustainable Chemistry and Engineering, 3 (9). pp. 2247-2253.

Hendriana, D. and Firmansyah, T. and Setiawan, J.D. and Garinto, D. (2015) Design and optimization of low speed horizontal-axis wind turbine using OpenFOAM. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10264-10274.

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. (2015) A new meshless local B-spline basis functions-FD method for two-dimensional heat conduction problems. International Journal of Numerical Methods for Heat and Fluid Flow, 25 (2). pp. 225-251.

Ho, W.S. and Khor, C.S. and Hashim, H. and Lim, J.S. and Ashina, S. and Herran, D.S. (2015) Optimal operation of a distributed energy generation system for a sustainable palm oil-based eco-community. Clean Technologies and Environmental Policy, 17 (6). pp. 1597-1617.

Hong, B.Z. and Keong, L.K. and Shariff, A.M. (2015) Modelling of Bubble Growth in Supersaturated Solution using Computational Fluid Dynamics-Population Balance Model (CFD-PBM) Approach. Defect and Diffusion Forum, 362. pp. 200-208.

Hosseini, S.N. and Shuker, M.T. and Hosseini, Z. and Joao Tomocene, T. and Shabib-asl, A. and Sabet, M. (2015) The role of salinity and brine ions in interfacial tension reduction while using surfactant for enhanced oil recovery. Research Journal of Applied Sciences, Engineering and Technology, 9 (9). pp. 722-726.

Hussain, A. and Abolaban, F. and Khubaib, S.M. and Mubin, S. and Ahmed, I. (2015) Steady state and transient thermalhydraulic analysis of PHWR using COBRA-3C/RERTR. Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, 39. pp. 233-242.

Ibrahim, Farouk and Moniruzzaman, Muhammad and Yusup, Suzana and Uemura, Yoshimitsu (2015) Dissolution of cellulose with ionic liquid in pressurized cell. Journal of Molecular Liquids, 211. pp. 370-372.

Ibrahim, F. and Moniruzzaman, M. and Yusup, S. and Uemura, Y. (2015) Dissolution of cellulose with ionic liquid in pressurized cell. Journal of Molecular Liquids, 211. pp. 370-372.

Ibrahim, N. and Wan Ahmad, W.F. and Shafie, A. (2015) Multimedia mobile learning application for childrenâ��s education: The development of MFolktales. Asian Social Science, 11 (24). pp. 203-215.

Imam, A.A. and Basri, S. and Ahmad, R. (2015) Data synchronization between mobile devices and server-side databases: A systematic literature review. Journal of Theoretical and Applied Information Technology, 81 (2). pp. 364-382.

Imam, A.A. and Basri, S.B. and Ahmad, R.B. (2015) Synchronization algorithm for remote heterogeneous database environment. Advances in Intelligent Systems and Computing, 349. pp. 55-65.

Imran, M. and Liew, M.S. and Nasif, M.S. (2015) Experimental studies on fire for offshore structures and its limitations: A review. Chemical Engineering Transactions, 45. pp. 1951-1956.

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. and Khan, Z. (2015) MINLP optimization for heat integration of bio-hydrogen production from palm waste. Journal of Engineering Science and Technology, 10 (Spec.i). pp. 50-60.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. (2015) An on-line condition monitoring system for induction motors via instantaneous power analysis. Journal of Mechanical Science and Technology, 29 (4). pp. 1483-1492.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Hung, N.T. and Magzoub, M.A. (2015) Analysis of Bearing Surface Roughness Defects in Induction Motors. Journal of Failure Analysis and Prevention, 15 (5). pp. 730-736.

Irshad, K. and Habib, K. and Basrawi, F. and Thirumalaiswamy, N. and Saidur, R. and Saha, B.B. (2015) Thermal comfort study of a building equipped with thermoelectric air duct system for tropical climate. Applied Thermal Engineering, 91. pp. 1141-1155.

Irshad, K. and Habib, K. and Thirumalaiswamy, N. and Saha, B.B. (2015) Performance analysis of a thermoelectric air duct system for energy-efficient buildings. Energy, 91. pp. 1009-1017.

Isa, M.H. (2015) Simulated textile dye wastewater treatment by electrochemical oxidation: application of response surface methodology (RSM). Desalination and Water Treatment, 53 (8). pp. 2260-2265.

Isa Ali, Md and Shahrir, A and Faizal, WM and Iskandar, MT (2015) The use of untreated waste cooking oil and diesel fuel blends as IC engine fuels. Applied Mechanics and Materials, 699. pp. 708-713.

Ishmanov, F. and Malik, A.S. and Kim, S.W. and Begalov, B. (2015) Trust management system in wireless sensor networks: Design considerations and research challenges. Transactions on Emerging Telecommunications Technologies, 26 (2). pp. 107-130.

Islam, B. and Baharudin, Z. and Nallagownden, P. (2015) Effect of input variables selection on energy demand prediction based on intelligent hybrid neural networks. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10228-10235.

Ismail, A. and Lee, Y.C. and Tammam, M. (2015) Elastic scattering analysis of p+40 Ca at incident energies from threshold to 48.4 MeV and nuclear matter radius. International Journal of Modern Physics E, 24 (7).

JAMALUDIN SITI NUR SAKINAH, . (2015) A parametric study on design and characteristics of stepwise-built functionally graded Hydroxyapatite/Titanium. A parametric study on design and characteristics of stepwise-built functionally graded Hydroxyapatite/Titanium.

Jaafar, J. and Janjua, U.I. and Lai, F.W. (2015) Software effective risk management: An evaluation of risk management process models and standards. Lecture Notes in Electrical Engineering, 339. pp. 837-844.

Jahan, S. and Sakidin, H. (2015) Influence of heat transfer on the MHD stagnation point flow of a power law fluid with convective boundary condition. Jurnal Teknologi, 77 (20). pp. 53-59.

Japper-Jaafar, A. and Bhaskoro, P.T. and Sean, L.L. and Sariman, M.Z. and Nugroho, H. (2015) Yield stress measurement of gelled waxy crude oil: Gap size requirement. Journal of Non-Newtonian Fluid Mechanics, 218. pp. 71-82.

Javaid, N. and Ahmad, A. and Nadeem, Q. and Imran, M. and Haider, N. (2015) iM-SIMPLE: iMproved stable increased-throughput multi-hop link efficient routing protocol for Wireless Body Area Networks. Computers in Human Behavior, 51. pp. 1003-1011.

Jebaraj, S. and Srinivasa Rao, P. (2015) High-efficiency solar oven for tropical countries. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10213-10217.

Johnson, O.A. and Madzlan, N. and Kamaruddin, I. (2015) Encapsulation of petroleum sludge in building blocks. Construction and Building Materials, 78. pp. 281-288.

Johnson, O.A. and Madzlan, N. and Kamaruddin, I. and Oloruntobi, O.O. (2015) Building blocks from petroleum sludge: Leachability and toxicity studies. International Journal of Applied Engineering Research, 10 (24). pp. 45479-45481.

Kaewanuchit, C. and Muntaner, C. and Isha, N. (2015) A causal relationship of occupational stress among university employees. Iranian Journal of Public Health, 44 (7). pp. 931-938.

Kamal, S. and Sharma, K.V. and Jayaganthan, R. and Prakash, S. (2015) Hot corrosion behavior of thermal spray coatings on superalloy in coal-fired boiler environment. Journal of Materials Research, 30 (18). pp. 2829-2843.

Kamaruddin, B and Zabiri, H (2015) Investigating the performance of Mixed Integer Quadratic Programming (MIQP)-based Model Predictive Control (MPC) for Control Valve Stiction Compensation.

Kannan, R. and Shanmuga Priyan, S. and Setiawan, J.D. (2015) Experimental verification of multilevel inverter with MPPT based solar energy. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10236-10244.

Kareem, M. W. and Habib, Khairul and irshad, kashif (2015) TRANSIENT MODELLING OF MULTI-PASS SOLAR THERMAL COLLECTOR WITH SENSIBLE ENERGY STORING MATRIX. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10200-10205. ISSN 1819-6608

Khairul Arifin Mohd Noh, Muhammad Hasif Syazwan Shamsul, Mohd Mo, . (2015) Structural Analysis of Bukit Bunuh Impact Crater using Transient Electromagnetic Method. Structural Analysis of Bukit Bunuh Impact Crater using Transient Electromagnetic Method.

Khairul Arifin Mohd Noh, Zuhar Zahir Tuan Harith, Abdul Halim Ab, . (2015) Hybrid Source-Receiver Geometry for Short-Spread Layout in 2D Seismic Reflection Acquisition. Hybrid Source-Receiver Geometry for Short-Spread Layout in 2D Seismic Reflection Acquisition.

Khan, M Irfan and Azizli, Khairun and Sufian, Suriati and Man, Zakaria (2015) Sodium silicate-free geopolymers as coating materials: Effects of Na/Al and water/solid ratios on adhesion strength. Ceramics International, 41 (2). pp. 2794-2805.

Khan, M Irfan and Min, Teoh K and Azizli, Khairun and Sufian, Suriati and Ullah, Hafeez and Man, Zakaria (2015) Effective removal of methylene blue from water using phosphoric acid based geopolymers: synthesis, characterizations and adsorption studies. RSC advances, 5 (75). pp. 61410-61420.

Khan, A.M. and Jeoti, V. (2015) On time-domain OFDM channel estimation: Use of pilots correlation for digital video broadcasting (DVB) cable receiver. Optoelectronics and Advanced Materials, Rapid Communications, 9 (5-6). pp. 891-897.

Khan, A.M. and Jeoti, V. and Azman Zakariya, M. (2015) Pilot based pre FFT signal to noise ratio estimation for OFDM systems in Rayleigh-fading channel. Lecture Notes in Electrical Engineering, 315. pp. 171-182.

Khan, M.A. and Ali, A. and Dennis, L.C.C. and Islam, S. and Khan, I. and Ullah, M. and Gul, T. (2015) Dynamical behavior of cholera epidemic model with non-linear incidence rate. Applied Mathematical Sciences, 9 (17-20). pp. 989-1002.

Khan, M.A. and Ali, Z. and Dennis, L.C.C. and Khan, I. and Islam, S. and Ullah, M. and Gul, T. (2015) Stability analysis of an SVIR epidemic model with non-linear saturated incidence rate. Applied Mathematical Sciences, 9 (21-24). pp. 1145-1158.

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. and Tan, I.M. (2015) A case study on preparation, stability and physical properties of water in diesel emulsion. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17289-17293.

Khan, Muhammad Burhan and Lee, Xue Yong and Nisar, Humaira and Ng, Choon Aun and Yeap, Kim Ho and Malik, Aamir Saeed (2015) Digital Image Processing and Analysis for Activated Sludge Wastewater Treatment. Advances in Experimental Medicine and Biology.

Khan, R.A. and Liew, M.S. and Zawawi, N.A.W.A. (2015) Impulse response analysis for Malaysian construction sector by vector error correction model. Malaysian Construction Research Journal, 16 (1). pp. 1-14.

Khan, W.Z. and Aalsalem, M.Y. and Saad, N.M. (2015) Distributed clone detection in static Wireless Sensor Networks: Random Walk with Network Division. PLoS ONE, 10 (5).

Khan, Z. and Inayat, A. and Yusup, S. and Ahmad, M.M. (2015) Kinetic parameters determination using optimization approach in integrated catalytic adsorption steam gasification for hydrogen production. International Journal of Hydrogen Energy, 40 (29). pp. 8824-8832.

Khan, Z. and Razali, R.B. and Daud, H. and Nor, N.M. and Firuzabad, M.F. (2015) The largest studentized residual test for bad data identification in state estimation of a power system. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10184-10191.

Kheradmand, M. and Castro-Gomes, J. and Azenha, M. and Silva, P.D. and De Aguiar, J.L.B. and Zoorob, S.E. (2015) Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems. Construction and Building Materials, 89. pp. 48-59.

Khoa, T.H. and Vasant, P.M. and Balbir Singh, M.S. and Dieu, V.N. (2015) Solving economic dispatch problem with valve-point effects using swarm-based meanâ��variance mapping optimization (MVMOS). Cogent Engineering, 2 (1).

Kim, D.K. and Choi, H.S. and Shin, C.S. and Liew, M.S. and Yu, S.Y. and Park, K.S. (2015) Fatigue performance of deepwater SCR under short-term VIV considering various S-N curves. Structural Engineering and Mechanics, 53 (5). pp. 881-896.

Kou, Lili and Ma, Zongmin and Li, Yan Jun and Naitoh, Yoshitaka and Komiyama, Masaharu and Sugawara, Yasuhiro (2015) Surface potential imaging with atomic resolution by frequency-modulation Kelvin probe force microscopy without bias voltage feedback. Nanotechnology, 26 (19). p. 195701.

Kulsi, C. and Mitra, M. and Kargupta, K. and Ganguly, S. and Banerjee, D. and Goswami, S. (2015) Effect of different surfactants and thicknesses on electrodeposited films of bismuth telluride and its thermoelectric performance. Materials Research Express, 2 (10).

Kurian, V.J. and Goh, S.S. and Wahab, M.M.A. and Liew, M.S. (2015) Component reliability assessment of offshore jacket platforms. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 1-10.

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2015) An experimental investigation of the responses of classic spar platform subjected to bi-directional waves. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 11-17.

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2015) A numerical and experimental study on motion responses of semi-submersible platforms subjected to short-crested waves. Journal of Vibration Engineering and Technologies, 3 (3). pp. 331-344.

Kurnia, J.C. and Sasmito, A.P. and Hassani, F.P. and Mujumdar, A.S. (2015) Introduction and evaluation of a novel hybrid brattice for improved dust control in underground mining faces: A computational study. International Journal of Mining Science and Technology, 25 (4). pp. 537-543.

Kurnia, K.A. and Lima, F. and ClÃ¡udio, A.F.M. and Coutinho, J.A.P. and Freire, M.G. (2015) Hydrogen-bond acidity of ionic liquids: an extended scale. Physical Chemistry Chemical Physics, 17 (29). pp. 18980-18990.

Kutty, S.R.M. and Yoong, L.S. and Khun, T.C. (2015) Growth performance, waste reduction and efficiency of conversion of digested food waste by Hermetia illucens larvae via bioconversion. Journal of Pure and Applied Microbiology, 9 (Specia). pp. 533-537.

Laghari, S.M. and Isa, M.H. and Laghari, A.J. (2015) Delignification of coconut husk by microwave assisted chemical pretreatment. Advances in Environmental Biology, 9 (1). pp. 1-5.

Lai, Li Sze and Yeong, Yin Fong and Lau, Kok Keong and Shariff, Azmi Mohd (2015) CO 2 and CH 4 permeation through zeolitic imidazolate framework (ZIF)-8 membrane synthesized via in situ layer-by-layer growth: An experimental and modeling study. Rsc Advances, 5 (96). pp. 79098-79106.

Lai, L.S. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2015) CO2 and CH4 permeation through zeolitic imidazolate framework (ZIF)-8 membrane synthesized via in situ layer-by-layer growth: an experimental and modeling study. RSC Advances, 5 (96). pp. 79098-79106.

Lam, Duong Bich Ngoc and Nurlidia, Mansor and Shuhaimi, Mahadzir and Muhamad, Fazizi Adenan and Billyianto, Among Bato and others (2015) Growth and lipid compositions of locally isolated microalgae. Journal of Applied Sciences, 15 (3). pp. 598-601.

Langove, N. and Isha, A.S.N. and Javaid, M.U. (2015) Time pressure, employee well-being, perceived organizational support and turnover intention of information technology executives in Malaysia: A proposed conceptual framework. Advanced Science Letters, 21 (6). pp. 1898-1901.

Le, Si NT and Nguyen, Khanh V and Mahadzir, Shuhaimi B and Chen, C-L (2015) Applying exergy analysis for simulation and optimization of the iso-butane recovery process from liquefied petroleum gas. Chemical Engineering Transactions, 45. pp. 619-624.

Le, S.N.T. and Nguyen, K.V. and Mahadzir, S.B. and Chen, C.-L. (2015) Applying exergy analysis for simulation and optimization of the iso-butane recovery process from liquefied petroleum gas. Chemical Engineering Transactions, 45. pp. 619-624.

Leong, S.Y. and Kutty, S.R.M. and Tan, C.K. and Tey, L.H. (2015) Comparative study on the effect of organic waste on lauric acid produced by hermetia illucens larvae via bioconversion. Journal of Engineering Science and Technology, 10 (Spec. ). pp. 52-63.

Lethesh, K.C. and Shah, S.N. and Mutalib, M.I.A. (2015) Synthesis, characterization, physical and thermodynamic properties of diazobicyclo undecene based dicyanamide ionic liquids. Journal of Molecular Liquids, 208. pp. 253-258.

Lieu, Thanh and Yusup, Suzana and Moniruzzaman, Muhammad (2015) Parametric study of esterification of free fatty acids derived from Ceiba Pentandra seed oil using microwaveassisted technique via response surface methodology. Chemical Engineering Transactions, 45. pp. 931-936.

Lieu, T. and Yusup, S. and Moniruzzaman, M. (2015) Parametric study of esterification of free fatty acids derived from Ceiba Pentandra seed oil using microwaveassisted technique via response surface methodology. Chemical Engineering Transactions, 45. pp. 931-936.

Liew, M.S. and Nordin, A.H. and Lim, E.S. and Zawawi, N.A.W.A. (2015) Wave energy spectrum for the south China sea. Marine Technology, 52 (3). pp. 15-18.

Liew, M.S. and Zawawi, N.A.W.A. (2015) The decommissioning challenge. Marine Technology, 52 (3). pp. 50-54.

Lim, C.H. and Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusup, S. and Lam, H.L. (2015) Element characteristic tolerance for semi-batch fixed bed biomass pyrolysis. Chemical Engineering Transactions, 45. pp. 1285-1290.

Lock, SSM and Lau, KK and Shariff, AM (2015) Effect of recycle ratio on the cost of natural gas processing in countercurrent hollow fiber membrane system. Journal of Industrial and Engineering Chemistry, 21. pp. 542-551.

Lock, Serene Sow Mu and Lau, Kok Keon and Ahmad, Faizan and Shariff, AM (2015) Modeling, simulation and economic analysis of CO2 capture from natural gas using cocurrent, countercurrent and radial crossflow hollow fiber membrane. International Journal of Greenhouse Gas Control, 36. pp. 114-134.

Lock, S.S.M. and Lau, K.K. and Ahmad, F. and Shariff, A.M. (2015) Modeling, simulation and economic analysis of CO2 capture from natural gas using cocurrent, countercurrent and radial crossflow hollow fiber membrane. International Journal of Greenhouse Gas Control, 36. pp. 114-134.

Lubis, A.M.H.S. and Ariwahjoedi, B. and Sudin, M.B. (2015) Investigation on oxidation and thermal stability of jatropha oil. Jurnal Teknologi, 77 (21). pp. 79-83.

M Nizarul, M. Hermana, Yasir Bashir, Deva Ghosh, . (2015) Improving thin bed identification in Sarawak Basin Field using short time fourier transform half cepstrum (STFTHC) methos. Improving thin bed identification in Sarawak Basin Field using short time fourier transform half cepstrum (STFTHC) methos.

Madani, T. and Tahir, M. and Ziauddin, S. and Raza, S. and Ahmed, M. and Khan, M. and Ashraf, M. (2015) An accelerometer-based approach to evaluate 3D unistroke gestures. International Arab Journal of Information Technology, 12 (4). pp. 389-394.

Madni, T.M. and Nayan, Y. and Sulaiman, S. and Tahir, M. (2015) Comparative investigation of medical contents using desktop and tabletop technologies. Lecture Notes in Electrical Engineering, 339. pp. 225-233.

Mahadi, Bahari and Abdullah, Bawadi and Alenazey, Feraih and Vo, Dai-Viet N (2015) Ethanol Dry Reforming for H2-Rich Syngas Production Over Ce-Ni/Al2O3 Catalyst.

Maharun, M. and Baharom, M.B. and Mohd, M.S. (2015) Ride comfort simulation of a vehicle equipped with semiactive steering system. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2495-2503.

Mahgoub, B.K.M. and Hassan, S. and Sulaiman, S.A. (2015) Effect of varying engine parameters and syngas composition on the combustion characteristics, performance and emission of syngas-diesel dual fuel engine - A review. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7712-7718.

Mahgoub, B.K.M. and Sulaiman, S.A. and Karim, Z.A.A. (2015) Performance study of imitated syngas in a dual-fuel compression ignition diesel engine. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2282-2293.

Mahmod, M.F. and Bakar, E.A. and Othman, A.R. and Ramzi, A.R. and Goh, C.Y. (2015) Fiber glass composite laminates (FGCL) measurement using 3 axis pulse echo scanning unit. Jurnal Teknologi, 76 (1). pp. 147-155.

Mahmood, Hamayoun and Moniruzzaman, Muhammad and Yusup, Suzana and Akil, Hazizan Md (2015) Comparison of some biocomposite board properties fabricated from lignocellulosic biomass before and after Ionic liquid pretreatment. CHEMICAL ENGINEERING, 45.

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Akil, H.Md. (2015) Comparison of some biocomposite board properties fabricated from lignocellulosic biomass before and after Ionic liquid pretreatment. Chemical Engineering Transactions, 45. pp. 709-714.

Majid, Noor Diana Abdul and Shariff, Azmi Mohd and Rusli, Risza (2015) Process Safety Management (PSM) for managing contractors in process plant. Journal of Loss Prevention in the Process Industries, 37. pp. 82-90.

Majidaie, S. and Onur, M. and Tan, I.M. (2015) An experimental and numerical study of chemically enhanced water alternating gas injection. Petroleum Science, 12 (3). pp. 470-482.

Malik, A.S. and Khairuddin, R.N.H.R. and Amin, H.U. and Smith, M.L. and Kamel, N. and Abdullah, J.M. and Fawzy, S.M. and Shim, S. (2015) EEG based evaluation of stereoscopic 3D displays for viewer discomfort. BioMedical Engineering Online, 14 (1).

Malik, Aamir Saeed and Amin, Hafeez Ullah and Badruddin , Nasreen and Kamel, Nidal S. and Ahmad, Rana Fayyaz and Mumtaz, Wajid (2015) Evaluation of Stereoscopic 3D Based Educational Contents for Long-Term Memorization. Annals of Neurology.

Malik, Aamir Saeed and Raja Khairuddin, Raja Nur Hamizah and Amin, Hafeez Ullah and Smith, Mark Llewellyn and Kamel , Nidal and Abdullah, Jafri Malin and Fawzy, Samar Mohammad and Shim, Seongo (2015) EEG based evaluation of stereoscopic 3D displays for viewer discomfort. BioMedical Engineering Online. ISSN 1475925X

Manaf, S.A.A. and Roy, P. and Sharma, K.V. and Ngaini, Z. and Malgras, V. and Aldalbahi, A. and Alshehri, S.M. and Yamauchi, Y. and Hegde, G. (2015) Catalyst-free synthesis of carbon nanospheres for potential biomedical applications: Waste to wealth approach. RSC Advances, 5 (31). pp. 24528-24533.

Mandal, Pradip Chandra and Abdalla, Mohamed A and Moniruzzaman, MD (2015) Acidity reduction of naphthenic acid using imidazolium chloride based ionic liquids. International Journal of Applied Engineering Research, 10 (89). pp. 69-74.

Maqsood, Khuram and Mohd Shar, Azmi B and Ganguly, Saibal (2015) Synthesis of Energy Efficient Cryogenic Distillation Networks for Maximum Methane Recovery from Natural Gas with Carbon Dioxide and Heavy Hydrocarbons. Journal of Applied Sciences, 15 (3). pp. 492-499.

Marneni, N. and Ashraf, M. (2015) Mixed convection flow over a permeable stretching wedge in the presence of heat generation/absorption, viscous dissipation, radiation and ohmic heating. Chemical Engineering Transactions, 45. pp. 955-960.

Martins, M.A.R. and Neves, C.M.S.S. and Kurnia, K.A. and Carvalho, P.J. and Rocha, M.A.A. and Santos, L.M.N.B.F. and Pinho, S.P. and Freire, M.G. (2015) Densities, viscosities and derived thermophysical properties of water-saturated imidazolium-based ionic liquids. Fluid Phase Equilibria, 407. pp. 188-196.

Mastor, F.A. and Aziz, I.A. and Haron, N.S. and Jaafar, J. and Ismail, N.N. and Mehat, M. (2015) Pre-flood warning system based on user mobility. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17905-17913.

Mat Desa, W.L.H. and Kamaruddin, S. and Nawawi, M.K.M. and Zulkepli, J. (2015) Evaluation on absenteeism effect in production line at aircraft composite manufacturer. Jurnal Teknologi, 77 (5). pp. 63-67.

Mazinani, I. and Binti Ismail, Z. and Hashim, A.M. (2015) Erratum: An Overview of Tsunami Wave Force on Coastal Bridge and Open Challenges (Journal of Earthquake and Tsunami (2015) 9:2 (1550006). Journal of Earthquake and Tsunami, 9 (3).

Mazinani, I. and Ismail, Z.B. and Hashim, A.M. (2015) An Overview of Tsunami Wave Force on Coastal Bridge and Open Challenges. Journal of Earthquake and Tsunami, 9 (2).

Mazlan, M.A.F. and Uemura, Y. and Osman, N.B. and Yusup, S. (2015) Fast pyrolysis of hardwood residues using a fixed bed drop-type pyrolyzer. Energy Conversion and Management, 98. pp. 208-214.

Md Yusof, M.A. and Mahadzir, N.A. (2015) Development of mathematical model for hydraulic fracturing design. Journal of Petroleum Exploration and Production Technology, 5 (3). pp. 269-276.

Mebrahitom Asmelash, G. and Mamat, O. and Ahmad, F. and Prasada Rao, A.K. (2015) Thermal shock and fatigue behavior of pressureless sintered Al2O3â��SiO2â��ZrO2 composites. Journal of Advanced Ceramics, 4 (3). pp. 190-198.

Mei, Irene Lock Sow and Ismail, Idris and Shafquet, Areeba and Abdullah, Bawadi (2015) Real-time monitoring and measurement of wax deposition in pipelines via non-invasive electrical capacitance tomography. Measurement Science and Technology, 27 (2). 025403.

Mei, I.L.S. and Ismail, I. and Shafquet, A. and Abdullah, B. (2015) Real-time monitoring and measurement of wax deposition in pipelines via non-invasive electrical capacitance tomography. Measurement Science and Technology, 27 (2).

Memon, A.H. and Bin Ibrahim, T. and Nallagowden, P. (2015) Design optimization of a pico linear permanent magnet generator with novel shaped magnet for wave energy conversion using finite element analysis. International Journal of Applied Engineering Research, 10 (18). pp. 39058-39065.

Memon, M.A. and Salleh, R. and Baharom, M.N.R. (2015) Linking person-job fit, person-organization fit, employee engagement and turnover intention: A three-step conceptual model. Asian Social Science, 11 (2). pp. 313-320.

Memon, M.A. and Salleh, R. and Baharom, M.N.R. (2015) Person-organization fit and turnover intention: Conceptualizing the moderating role of social exchange ideology. Advanced Science Letters, 21 (6). pp. 2127-2129.

Miin, C.S. and Sulaiman, S.A. and Raghavan, V.R. and Heikal, M.R. and Naz, M.Y. (2015) Hydrodynamics of multi-sized particles in stable regime of a swirling bed. Korean Journal of Chemical Engineering, 32 (11). pp. 2361-2367.

Mohamad, Taib Iskandar (2015) In-water injection of high-pressure pulsed gas jet: A simple analytical tool for direct injection of gaseous fuels in automotive engine. Fuel, 160. pp. 386-392.

Mohamed, Norani Muti and Bashiri, Robabeh and Chong, Fai Kait and Sufian, Suriati and Kakooei, Saeid (2015) Photoelectrochemical behavior of bimetallic Cu--Ni and monometallic Cu, Ni doped TiO2 for hydrogen production. international journal of hydrogen energy, 40 (40). pp. 14031-14038.

Mohamed, N.M. and Bashiri, R. and Chong, F.K. and Sufian, S. and Kakooei, S. (2015) Photoelectrochemical behavior of bimetallic Cu-Ni and monometallic Cu, Ni doped TiO2 for hydrogen production. International Journal of Hydrogen Energy, 40 (40). pp. 14031-14038.

Mohamed, N.M. and Khatani, M. and Hamid, N.H. and Sahmer, A.Z. and Zaine, S.N.A. (2015) Performance analysis of dye solar cell with additional TiO2 layer under different light Intensities. Materials Science in Semiconductor Processing, 38. pp. 381-386.

Mohamed, Shakir and Qidwai, Uvais and Malik, Aamir Saeed and Kamel , Nidal (2015) Electroencephalography Simulation Hardware for Realistic Seizure, Preseizure and Normal Mode Signal Generation. Journal of Medical Imaging and Health Informatics.

Mohammad Rozali, N.E. and Wan Alwi, S.R. and Manan, Z.A. and KlemeÅ¡, J.J. (2015) Peak-off-peak load shifting for hybrid power systems based on Power Pinch Analysis. Energy, 90. pp. 128-136.

Mohammadat, M.T. and Ali, N.B.Z. and Hussin, F.A. and Zwolinski, M. (2015) Resistive open faults detectability analysis and implications for testing low power nanometric ICs. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 23 (3). pp. 580-583.

Mohammadat, Mohamed Tag Elsir and Zain Ali , Noohul Basheer and Hussin, Fawnizu Azmadi and Zwolinski, Mark (2015) Resistive Open Faults Detectability Analysis and Implications for Testing Low Power Nanometric ICs. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 23 (3). pp. 580-583. ISSN 1063-8210

Mohammed, Bashar S and Fadhil Nuruddin, Muhd and bt Mohd Azizli, Khairun Azizi and Ku Shaari, Ku Zilati (2015) Geopolymer steel slag brick. Applied Mechanics and Materials, 754. pp. 296-299.

Mohammed, B.S. and Ibrahim, R. and Perumal, N. and Rama Rao, K.S. (2015) Power flow control of a multi-bus/three-feeder distribution system using generalized unified power quality conditioner. Journal of Electrical Engineering and Technology, 10 (1). pp. 8-17.

Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusuf, S. and Alshareef, I. and Chin, S.A. (2015) Pyrolysis of Napier Grass in a Fixed Bed Reactor: Effect of Operating Conditions on Product Yields and Characteristics. BioResources, 10 (4). pp. 6457-6478.

Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusup, S. and Alshareef, I. and Chin, S.A. (2015) Comprehensive characterization of Napier grass as a feedstock for thermochemical conversion. Energies, 8 (5). pp. 3403-3417.

Mohammed, I.Y. and Kazi, F.K. and Abakr, Y.A. and Yusuf, S. and Razzaque, M.A. (2015) Novel method for the determination of water content and higher heating value of pyrolysis oil. BioResources, 10 (2). pp. 2681-2690.

Mohd Zaid, H.F. and Chong, F.K. and Abdul Mutalib, M.I. (2015) Photooxidative-extractive deep desulfurization of diesel using Cu-Fe/TiO2 and eutectic ionic liquid. Fuel, 156. pp. 54-62.

Mohshim, Dzeti Farhah and Mukhtar, Hilmi and Man, Zakaria (2015) Ionic Liquid Embedded in Polymeric Membrane for High Pressure CO 2 Separation. Chemical Engineering Transactions, 45. pp. 1423-1428.

Mohshim, D.F. and Mukhtar, H. and Man, Z. (2015) Ionic liquid embedded in polymeric membrane for high pressure CO2 separation. Chemical Engineering Transactions, 45. pp. 1423-1428.

Mohtar, S.S. and Tengku Malim Busu, T.N.Z. and Md Noor, A.M. and Shaari, N. and Yusoff, N.A. and Bustam Khalil, M.A. and Abdul Mutalib, M.I. and Mat, H.B. (2015) Extraction and characterization of lignin from oil palm biomass via ionic liquid dissolution and non-toxic aluminium potassium sulfate dodecahydrate precipitation processes. Bioresource Technology, 192. pp. 212-218.

Mokhtar, A.A. and Saari, N. and Ismail, M.C. (2015) Assessment of insulated piping system inspection using logistic regression. Lecture Notes in Mechanical Engineering, 19. pp. 265-277.

Moniruzzaman, M and Ono, T and Bustam, M Azmi and Yusup, S and Uemura, Y and others (2015) Pretreatment of wood biomass with ionic liquids: a" green" approach to separate cellulose for use in oilfield application. Journal of Applied Sciences, 15 (3). pp. 531-537.

Moniruzzaman, Md and Islam, Md Saiful and Chandra, Shuvodip and Koli, Anar and Hassan, Mirza Jahid (2015) Tuberculosis and Deep Venous Thrombosis, a rare complication of a common disease: A case report. KYAMC Journal, 6 (1). pp. 598-600.

Moniruzzaman, M. and Mahmood, H. and Kamiya, N. and Yusup, S. and Goto, M. (2015) Activity and stability of enzyme immobilized with ionic liquid based polymer materials. Journal of Engineering Science and Technology, 10. pp. 60-69.

Montasir, O.A. and Yenduri, A. and Kurian, V.J. (2015) Effect of mooring line configurations on the dynamic responses of truss spar platforms. Ocean Engineering, 96. pp. 161-172.

Mubashir, Muhammad and Fong, Yeong Yin and Keong, Lau Kok and Sharrif, Mohd Azmi Bin (2015) Synthesis and performance of deca-dodecasil 3 rhombohedral (ddr)-type zeolite membrane in CO2 separation—a review. ASEAN Journal of Chemical Engineering, 14 (2). pp. 48-57.

Mubashir, Muhammad and Yeong, Yin Fong and Nazri, Nur Syahirah Binti Mohamed and Lau, Kok Keong (2015) Accelerated synthesis of deca-dodecasil 3 rhombohedral (DDR3) zeolite crystals via hydrothermal growth coupled with ultrasonic irradiation method. RSC advances, 5 (29). pp. 22658-22664.

Muhammad, Ibrahim Dauda and Awang, Mokhtar and Mamat, Othman and Shaari, Ku Zilati Ku (2015) Estimating Youngâ��s modulus of single-walled zirconia nanotubes using nonlinear finite element modeling. Journal of Nanomaterials, 16 (1). p. 8.

Muhammad, Mubashir and Yeong, Yin Fong and Lau, Kok Keong and Mohd Shariff, Azmi Bin (2015) Issues and challenges in the development of deca-dodecasil 3 rhombohedral membrane in CO2 capture from natural gas. Separation & Purification Reviews, 44 (4). pp. 331-340.

Muhammad, M. and Nasir, M. and Mokhtar, A.A. and Hussin, H. (2015) Continuous life cycle cost model for repairable system. Lecture Notes in Mechanical Engineering, 19. pp. 279-287.

Muhammad, M. and Yeong, Y.F. and Lau, K.K. and Mohd Shariff, A.B. (2015) Issues and challenges in the development of deca-dodecasil 3 rhombohedral membrane in CO2 capture from natural gas. Separation and Purification Reviews, 44 (4). pp. 331-340.

Muhammad, N. and Gao, Y. and Khan, M.I. and Khan, Z. and Rahim, A. and Iqbal, F. and khan , A.S. and Iqbal, J. (2015) Effect of ionic liquid on thermo-physical properties of bamboo biomass. Wood Science and Technology, 49 (5). pp. 897-913.

Muhammad, N. and Man, Z. and Mutalib, M.I.A. and Bustam, M.A. and Wilfred, C.D. and Khan, A.S. and Ullah, Z. and Gonfa, G. and Nasrullah, A. (2015) Dissolution and Separation of Wood Biopolymers Using Ionic Liquids. ChemBioEng Reviews, 2 (4). pp. 257-278.

Muhammad, N.A. and Chin, J.F. and Kamarrudin, S. and Chik, M.A. and Prakash, J. (2015) Fundamental simulation studies of CONWIP in front-end wafer fabrication. Journal of Industrial and Production Engineering, 32 (4). pp. 232-246.

Muhammad, Y. and Norani Muti, M. and Nor Hisham, H. and Mohamed Shuaib, M.S. and Shazia, S. (2015) Growth of sub-millimeter long vertically aligned multi-walled carbon nanotubes arrays for sensing applications. Malaysian Journal of Microscopy, 11 (1). pp. 121-126.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2015) Thermal conductivity of powder injection molded carbon nanotube-reinforced copper-matrix composites. International Journal of Powder Metallurgy, 51 (1). pp. 57-66.

Mukhtar, Amir and Xia, Likun and Tang, Tong Boon (2015) Vehicle detection techniques for collision avoidance systems: A review. IEEE transactions on intelligent transportation systems, 16 (5). pp. 2318-2338.

Mukhtar, A. and Xia, L. and Tang, T.B. (2015) Vehicle Detection Techniques for Collision Avoidance Systems: A Review. IEEE Transactions on Intelligent Transportation Systems, 16 (5). pp. 2318-2338.

Mumtaz, W. and Malik, A.S. and Yasin, M.A.M. and Xia, L. (2015) Review on EEG and ERP predictive biomarkers for major depressive disorder. Biomedical Signal Processing and Control, 22. pp. 85-98.

Mumtaz, Wajid and Malik, Aamir Saeed and Mohd Yasin, Mohd Azhar and Xia, Likun (2015) Review on EEG and ERP predictive biomarkers for major depressive disorder. Biomedical Signal Processing and Control.

Muniandy, M. and Sulaiman, S. (2015) An exploratory study on blind usersâ�� mental model in computer accessibility. Lecture Notes in Electrical Engineering, 315. pp. 925-938.

Munir, S. and Siddiqui, M.I. and Heikal, M. and Abdul Aziz, A.R. and de Sercey, G. (2015) Identification of dominant structures and their flow dynamics in the turbulent two-phase flow using POD technique. Journal of Mechanical Science and Technology, 29 (11). pp. 4701-4710.

Musah, A.A. and Ghazali, Z. and Isha, A.S.N. (2015) Role of temperament and communication in conflict management styles: A conceptual approach. Advanced Science Letters, 21 (6). pp. 1776-1780.

Mushtaq, A and Mukhtar, H and Shariff, AM (2015) Effect of MEA on the performance of polysulfone/polyvinyl acetate blend membranes. BULGARIAN CHEMICAL COMMUNICATIONS, 2. p. 584.

Mushtaq, M. and Tan, I.M. and Rashid, U. and Sagir, M. and Mumtaz, M. (2015) Effect of pH on the static adsorption of foaming surfactants on Malaysian sandstone. Arabian Journal of Geosciences, 8 (10). pp. 8539-8548.

Mustafa, A.T. and Al-Kayiem, H.H. and Gilani, S.I.U. (2015) Investigation and evaluation of the solar air collector model to support the solar vortex engine. ARPN Journal of Engineering and Applied Sciences, 10 (12). pp. 5309-5319.

Muthuvalu, M.S. and Asirvadam, V.S. and Mashadov, G. (2015) Performance analysis of Arithmetic Mean method in determining peak junction temperature of semiconductor device. Ain Shams Engineering Journal, 6 (4). pp. 1203-1210.

Nagrath, Vineet and Morel, Olivier and Malik, Aamir Saeed and Mohamad, Naufal Mohamad (2015) Dynamic electronic institutions in agent oriented cloud robotic systems. SpringerPlus.

Nagrath, Vineet and Morel, Olivier and Malik, Aamir Saeed and Mohamad Saad, Mohamad Naufal and Meriaudeau, Fabrice (2015) Peer to peer trade in HTM5 meta model for agent oriented cloud robotic systems. Peer-to-Peer Networking and Applications.

Nallagownden, P. and Alhaj, H.M.M. and Sarwar, M.B. (2015) Optimizing the efficiency of Oscillating Water Column (OWC) wave energy converter using genetic algorithm. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10218-10227.

Naqvi, S.A.A. and Badruddin, N. and Jatoi, M.A. and Malik, A.S. and Hazabbah, W. and Abdullah, B. (2015) EEG based time and frequency dynamics analysis of visually induced motion sickness (VIMS). Australasian Physical and Engineering Sciences in Medicine, 38 (4). pp. 721-729.

Naqvi, S.R. and Uemura, Y. and Yusup, S. and Sugiura, Y. and Nishiyama, N. (2015) In situ catalytic fast pyrolysis of paddy husk pyrolysis vapors over MCM-22 and ITQ-2 zeolites. Journal of Analytical and Applied Pyrolysis, 114. pp. 32-39.

Naqvi, Syed Ali Arsalan and Badruddin , Nasreen and Jatoi, Munsif Ali and Malik, Aamir Saeed and Hazabbah, Wan and Abdullah, Baharudin (2015) EEG based time and frequency dynamics analysis of visually induced motion sickness (VIMS). Australasian Physical and Engineering Sciences in Medicine. ISSN 1879-5447

Nasif, M.S. (2015) Effect of utilizing different permeable material in air-to-air fixed plate energy recovery heat exchangeron energy saving. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10153-10158.

Nasir, Qazi and Sabil, Khalik M and Lau, KK (2015) Measurement of isothermal (vapor+ liquid) equilibria,(VLE) for binary (CH4+ CO2) from T=(240.35 to 293.15) K and CO2 rich synthetic natural gas systems from T=(248.15 to 279.15) K. Journal of Natural Gas Science and Engineering, 27. pp. 158-167.

Nasir, Rizwan and Mukhtar, Hilmi and Man, Zakaria and Dutta, Binay K and Shaharun, Maizatul Shima and Bakar, Mohamad Zailani Abu (2015) Mixed matrix membrane performance enhancement using alkanolamine solution. Journal of Membrane Science, 483. pp. 84-93.

Nasir, Rizwan and Mukhtar, Hilmi and Man, Zakaria and Shaharun, Maizatul Shima and Bakar, MZ Abu (2015) Development and performance prediction of polyethersulfone-carbon molecular sieve mixed matrix membrane for CO2/CH4 separation. Chemical Engineering Transactions, 45. pp. 1417-1422.

Nasir, Rizwan and Mukhtar, Hilmi and Man, Zakaria and Shaharun, Maizatul Shima and Bakar, Mohamad Zailani Abu (2015) Effect of fixed carbon molecular sieve (CMS) loading and various di-ethanolamine (DEA) concentrations on the performance of a mixed matrix membrane for CO 2/CH 4 separation. Rsc Advances, 5 (75). pp. 60814-60822.

Nasir, Rizwan and Mukhtar, Hilmi and Man, Zakaria and Shaharun, Maizatul Shima Bt and Bakar, Mohamad Zailani Abu (2015) PERFORMANCE STUDY OF AMINE INCORPORATED POLYMERIC MEMBRANE FOR CARBON DIOXIDE REMOVAL. Polymers Research Journal, 9 (4). p. 435.

Nasir, Q. and Sabil, K.M. and Lau, K.K. (2015) Measurement of isothermal (vapor+liquid) equilibria, (VLE) for binary (CH4+CO2) from T=(240.35 to 293.15) K and CO2 rich synthetic natural gas systems from T=(248.15 to 279.15) K. Journal of Natural Gas Science and Engineering, 27. pp. 158-167.

Nasir, R. and Mukhtar, H. and Man, Z. and Dutta, B.K. and Shaharun, M.S. and Abu Bakar, M.Z. (2015) Mixed matrix membrane performance enhancement using alkanolamine solution. Journal of Membrane Science, 483. pp. 84-93.

Nasir, R. and Mukhtar, H. and Man, Z. and Shaharun, M.S. and Abu Bakar, M.Z. (2015) Effect of fixed carbon molecular sieve (CMS) loading and various di-ethanolamine (DEA) concentrations on the performance of a mixed matrix membrane for CO<inf>2</inf>/CH<inf>4</inf> separation. RSC Advances, 5 (75). pp. 60814-60822.

Nasir, R. and Mukhtar, H. and Man, Z. and Shaharun, M.S. and Bakar, M.Z.A. (2015) Development and performance prediction of polyethersulfone-carbon molecular sieve mixed matrix membrane for CO2/CH4 separation. Chemical Engineering Transactions, 45. pp. 1417-1422.

Nawaz, F. and Jeoti, V. (2015) A novel anti-collision protocol for optimization of remote sensing in dense reader network. Lecture Notes in Electrical Engineering, 315. pp. 213-222.

Naz, MY and Sulaiman, SA and Ariwahjoedi, B and Shaari, KZK (2015) Effect of pre-coat solution temperature on fluidized bed urea coatings. Surface Engineering, 31 (7). pp. 486-491.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Shakir, I. and Ullah, S. and Sagir, M. and Pervaiz, M. (2015) Surface morphology and mechanical strength of AISI M2 tool steel treated in abnormal glow region of plasma. Surface Engineering and Applied Electrochemistry, 51 (1). pp. 58-64.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Shaari, K.Z.K. (2015) Effect of pre-coat solution temperature on fluidized bed urea coatings. Surface Engineering, 31 (7). pp. 486-491.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Zilati, K. (2015) Visual characterization of heated water spray jet breakup induced by full cone spray nozzles. Journal of Applied Mechanics and Technical Physics, 56 (2). pp. 211-219.

Naz, M.Y. and Sulaiman, S.A. and Man, Z. (2015) Time function DualPDA study of spray growth and droplet size-velocity profiles of chemically modified tapioca starch. Aerosol and Air Quality Research, 15 (5). pp. 1699-1711.

Naz, M.Y. and Sulaiman, S.A. and Man, Z. and Ariwahjoedi, B. (2015) Effect of the water spray stress on swirling fluidized bed height. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10192-10195.

Nazri, N.I.A.M. and Awang Rambli, D.R. and Doolan, D.C. (2015) Interaction experiences in mobile augmented reality. Jurnal Teknologi, 75 (3). pp. 75-80.

Nik Yusoff, N.H. and Mamat, O. and Isa, M.C. (2015) A review of electrodeposition techniques and variables for production of nickel-cobalt / alumina (Ni-Co/Al2O3) composite coatings. Defence S and T Technical Bulletin, 8 (2). pp. 129-140.

Nizamani, F. and Marimuthu, M. (2015) Small and medium enterprises: Asymmetric information and critical factors affecting bank financing. Advanced Science Letters, 21 (5). pp. 1615-1618.

Norbert Simon, Michael Crozier, Mairead Roiste, Abdul Ghani Rafe, . (2015) Time series assessment on landslide occurrences in an area undergoing development. Time series assessment on landslide occurrences in an area undergoing development.

Nordin, A. and Majid, M.A.A. (2015) Performance assessment of Heat Recovery Steam Generator at district Cooling plant. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10196-10199.

Norizan, S.N.I.B. and Aziz, I.B.A. and Haron, N.S. and Jaafar, J. and Ismail, N.N. and Mehat, M. (2015) Roadside worker detection and alert system using RFID. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17899-17904.

Nuruddin, M.F. and Memon, F.A. and Demie, S. and Shafiq, N. (2015) Influence of water-to-geopolymer solids ratio and curing time on the properties of self-compacting geopolymer concrete. Malaysian Construction Research Journal, 13 (2). pp. 29-38.

Nuruddin, M.F. and Ullah Khan, S. and Shafiq, N. and Ayub, T. (2015) Strength prediction models for PVA fiber-reinforced high-strength concrete. Journal of Materials in Civil Engineering, 27 (12).

Nurudin, M.F. and Memon, F.A. (2015) Properties of self-compacting geopolymer concrete. Materials Science Forum, 803. pp. 99-109.

Okitsu, J. and Khamis, M.F.I. and Zakaria, N. and Naono, K. and Haruna, A.A. (2015) Toward an architecture for integrated gas district cooling with data center control to reduce CO2 emission. Sustainable Computing: Informatics and Systems, 6. pp. 39-47.

Olisa, E. and Sapari, N. and Malakahmad, A. and Orji, K.U. and Riahi, A. (2015) Detection of landfill gas in leachate pipe and pond of a semi-aerobic landfill. Chemical Engineering Transactions, 45. pp. 1687-1692.

Ooi, B.L. and Gilbert, J.M. and Aziz, A.R.A. (2015) Switching damping for a frequency-tunable electromagnetic energy harvester. Sensors and Actuators, A: Physical, 234. pp. 311-320.

Osman Ali, Amal Seralkhatem and Asirvadam , Vijanth Sagayan and Malik, Aamir Saeed and Eltoukhy , Mohamed Meselhy and Abd Aziz, Azrina (2015) Age-Invariant Face Recognition Using Triangle Geometric Features. International Journal of Pattern Recognition and Artificial Intelligence. ISSN 2180014

Padmanabhan, E. and Sivapriya, B. and Huang, K.H. and Askury, A.K. and Chow, W.S. (2015) The impact of stylolites and fractures in defining critical petrophysical and geomechanical properties of some carbonate rocks. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 1 (1-2). pp. 55-67.

Park, D.K. and Kim, D.K. and Park, C.-H. and Park, D.H. and Jang, B.S. and Kim, B.J. and Paik, J.K. (2015) On the crashworthiness of steel-plated structures in an arctic environment: An experimental and numerical study. Journal of Offshore Mechanics and Arctic Engineering, 137 (5).

Partoon, Behzad and Sabil, Khalik M and Keong, Lau Kok (2015) Capturing carbon dioxide through a gas hydrate-based process. Chemical Engineering Transactions, 45. pp. 1867-1872.

Partoon, B. and Sabil, K.M. and Keong, L.K. (2015) Capturing carbon dioxide through a gas hydrate-based process. Chemical Engineering Transactions, 45. pp. 1867-1872.

Patil, S.S. and Karuppanan, S. and Atanasovska, I. (2015) Contact stress evaluation of involute gear pairs, including the effects of friction and helix angle. Journal of Tribology, 137 (4).

Pendyala, R. and Chong, J.L. and Ilyas, S.U. (2015) CFD analysis of heat transfer performance in a car radiator with nanofluids as coolants. Chemical Engineering Transactions, 45. pp. 1261-1266.

Pendyala, R. and Wong, Y.S. and Ilyas, S.U. (2015) CFD simulations of natural convection heat transfer in enclosures with varying aspect ratios. Chemical Engineering Transactions, 45. pp. 793-798.

Pendyala, R. and Yong, J. and Azman, I.A. and Ilyas, S.U. (2015) CFD simulations of transient fuel gases mixing, leakage and flammability in air. Chemical Engineering Transactions, 45. pp. 1921-1926.

Potty, N.S. and Sirajuddin, M. (2015) Study on empirical seismic codal guidelines for masonry buildings in Kollam, Kerala, India. Journal of Engineering Science and Technology, 10 (7). pp. 865-877.

Purnomo, E.W. and Ghosh, D.P. (2015) The maximum amplitude weighted integrated energy spectra: A new gauge in seismic thin-bed interpretation. Journal of Engineering and Technological Sciences, 47 (1). pp. 20-35.

Qayyum, A. and Shoaib, M. and Faye, I. (2015) Some new generalized results on Ostrowski type integral inequalities with application. Journal of Computational Analysis and Applications, 19 (4). pp. 693-712.

Quental, M.V. and Passos, H. and Kurnia, K.A. and Coutinho, J.A.P. and Freire, M.G. (2015) Aqueous Biphasic Systems Composed of Ionic Liquids and Acetate-Based Salts: Phase Diagrams, Densities, and Viscosities. Journal of Chemical and Engineering Data, 60 (6). pp. 1674-1682.

Rafiq, S. and Maulud, A. and Man, Z. and Mutalib, M.I.A. and Ahmad, F. and Khan, A.U. and Khan, A.L. and Ghauri, M. and Muhammad, N. (2015) Modelling in mixed matrix membranes for gas separation. Canadian Journal of Chemical Engineering, 93 (1). pp. 88-95.

Rahman, I. and Vasant, P. and Singh, B.S.M. and Abdullah-Al-Wadud, M. (2015) Technical challenges of plug-in hybrid electric vehicles deployment in smart electric grid. Contemporary Engineering Sciences, 8 (21-24). pp. 1119-1126.

Rahman, I. and Vasant, P.M. and Mahinder Singh, B.S. and Abdullah-Al-Wadud, M. (2015) Swarm Intelligence-Based Smart Energy Allocation Strategy for Charging Stations of Plug-In Hybrid Electric Vehicles. Mathematical Problems in Engineering, 2015.

Rahmanian, N. and Ali, S.H.B. and Homayoonfard, M. and Ali, N.J. and Rehan, M. and Sadef, Y. and Nizami, A.S. (2015) Analysis of physiochemical parameters to evaluate the drinking water quality in the state of perak, Malaysia. Journal of Chemistry, 2015.

Rahmanian, N. and Ilias, I.B. and Nasrifar, K. (2015) Process simulation and assessment of a back-up condensate stabilization unit. Journal of Natural Gas Science and Engineering, 26. pp. 730-736.

Rahmiati, T. and Azizli, K.A. and Man, Z. and Ismail, L. and Nuruddin, M.F. (2015) Effect of solid/liquid ratio during curing time fly ash based geopolymer on mechanical property. Materials Science Forum, 803. pp. 120-124.

Rajabi, MS and Moniruzzaman, M and Bustam, MA and Lotfi, M (2015) Recent advances of ionic liquids in extarction of biologically active compounds: A review. Am. J. Chem, 5. pp. 7-12.

Rashidi, N.A. and Yusup, S. (2015) Effect of process variables on the production of biomass-based activated carbons for carbon dioxide capture and sequestration. Chemical Engineering Transactions, 45. pp. 1507-1512.

Raza, M.Q. and Khosravi, A. (2015) A review on artificial intelligence based load demand forecasting techniques for smart grid and buildings. Renewable and Sustainable Energy Reviews, 50. pp. 1352-1372. ISSN 13640321

Razali, R. and Shafie, A. and Hassan, A.R. and Khan, H. (2015) A multivariate study of energy consumption, urbanisation, trade openness and economic growth in Malaysia. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10275-10280.

Rehan, M. and Hasbullah, H. and Rehan, M. and Chughtai, O. and Rehan, W. (2015) Zoomout HELLO: A novel 1-hop broadcast scheme to improve network QoS for VANET on highways. Advances in Intelligent Systems and Computing, 306. pp. 75-84.

Rehman, M.Z.U. and Baharudin, Z. and Zakariya, M.A. and Khir, M.H.M. and Jilani, M.T. (2015) RF MEMS based tunable bowtie shaped substrate integrated waveguide filter. Radioengineering, 24 (1). pp. 25-31.

Reiniati, I. and Osman, N.B. and Mc Donald, A.G. and Laborie, M.-P. (2015) Linear viscoelasticity of hot-pressed hybrid poplar relates to densification and to the in situ molecular parameters of cellulose. Annals of Forest Science, 72 (6). pp. 693-703.

Roslim, M.K. and Hassan, S. and Baheta, A.T. (2015) Experimental investigation on heat transfer enhancement by using porous twisted plate as an insert in a fitted tube. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10164-10168.

Rozali, N.E.M. and Alwi, S.R.W. and Ho, W.S. and Manan, Z.A. and KlemeÅ¡, J.J. (2015) Expansion of a diesel plant into a hybrid power system using power pinch analysis. Chemical Engineering Transactions, 45. pp. 343-348.

S.Y.M Alashloo, Deva Ghosh, YasirBashir, W. I. Wan Yusoff, . (2015) A comparision on initial-value ray tracing and fast marching eikonal solver for VTI traveltime computing. A comparision on initial-value ray tracing and fast marching eikonal solver for VTI traveltime computing.

SN Fathiyah Jamaludin, AH Abdul Latiff, DP Ghosh, . (2015) Structural Balancing vs Horizon Flattening on Seismic Data: Example from Extensional Tectonic Setting. Structural Balancing vs Horizon Flattening on Seismic Data: Example from Extensional Tectonic Setting.

SN Fathiyah Jamaludin, Abdul Halim Abdul Latiff, Askury A. Kadir, . (2015) Interpretation of Gas Seepages on Seismic Data: Example from Malaysian Offshore. Interpretation of Gas Seepages on Seismic Data: Example from Malaysian Offshore.

Saad, M.N.M. and Laouiti, A. and Qayyum, A. (2015) Foreword. Advances in Intelligent Systems and Computing, 306. V-VI.

Saad, M.S.M. and Rizal, A.R.A. and Nordin, S.M. (2015) Analyzing inter-organization communication between customer and supplier of subsidized paddy fertilizer. Asian Social Science, 11 (17). pp. 90-100.

Sabil, Khalik M and Nashed, Omar and Lal, Bhajan and Ismail, Lukman and Japper-Jaafar, Azuraien (2015) Experimental investigation on the dissociation conditions of methane hydrate in the presence of imidazolium-based ionic liquids. The Journal of Chemical Thermodynamics, 84. pp. 7-13.

Saeed, M.O. and Azizli, K. and Isa, M.H. and Bashir, M.J.K. (2015) Application of CCD in RSM to obtain optimize treatment of POME using Fenton oxidation process. Journal of Water Process Engineering, 8. e7-e16.

Safdar, Rizwan and Omar, Abdul Aziz and Ismail, Lukman B and Bari, Arhama and Lal, Bhajan (2015) Measurement and correlation of physical properties of aqueous solutions of tetrabutylammonium hydroxide, piperazine and their aqueous blends. Chinese Journal of Chemical Engineering, 23 (11). pp. 1811-1818.

Safdar, R. and Omar, A.A. and Ismail, L.B. and Bari, A. and Lal, B. (2015) Measurement and correlation of physical properties of aqueous solutions of tetrabutylammonium hydroxide, piperazine and their aqueous blends. Chinese Journal of Chemical Engineering, 23 (11). pp. 1811-1818.

Saini, S. and Zakaria, N. and Rambli, D.R.A. and Sulaiman, S. (2015) Markerless human motion tracking using hierarchical multi-swarm cooperative particle swarm optimization. PLoS ONE, 10 (5).

Salihi, I.U. and Kutty, S.R.M. and Isa, M.H. and Olisa, E. and Aminu, N. (2015) Adsorption of copper using modified and unmodified sugarcane bagasse. International Journal of Applied Engineering Research, 10 (19). pp. 40434-40438.

Sasmito, A.P. and Kurnia, J.C. and Birgersson, E. and Mujumdar, A.S. (2015) Computational evaluation of thermal management strategies in an underground mine. Applied Thermal Engineering, 90. pp. 1144-1150.

Satti, I.A. and Ghosh, D. and Wan Yusoff, W.I. (2015) 3-D predrill overpressure prediction using prestack depth-migrated seismic velocity in a field of southwestern Malay Basin. Arabian Journal of Geosciences, 8 (9). pp. 7387-7398.

Satti, I.A. and Ghosh, D. and Yusoff, W.I.W. and Hoesni, M.J. (2015) Origin of overpressure in a field in the southwestern Malay basin. SPE Drilling and Completion, 30 (3). pp. 198-211.

Satti, Iftikhar Ahmed and Ghosh, Deva Prasad and Wan Yusoff , Wan Ismail (2015) 3D predrill pore pressure prediction using basin modeling approach in a field of Malay Basin. asian journal of earth sciences.

Savall, J. and Ho, E.T.W. and Huang, C. and Maxey, J.R. and Schnitzer, M.J. (2015) Dexterous robotic manipulation of alert adult Drosophila for high-content experimentation. Nature Methods, 12 (7). pp. 657-660.

Savita, K.S. and Dominic, P.D.D. and Ratnam, K.A. (2015) The role of green IT and IT for green within green supply Chain management: A preliminary finding from ISO14001 companies in Malaysia. Lecture Notes in Electrical Engineering, 315. pp. 883-894.

Sethi, Muhammad Athar Javed and Hussin , Fawnizu Azmadi and Hamid, Nor Hisham (2015) Survey of Network on Chip Architectures. Science International, 27 (5). pp. 4133-4144. ISSN 1013-5316

Shad, Muhammad Kashif and Lai, Fong Woon (2015) Enterprise Risk Management and Firm Performance Validated Through Economic Value Added Factors. INTERNATIONAL JOURNAL OF ECONOMICS AND STATISTICS.

Shafiq, N. and Nurrudin, M.F. and Gardezi, S.S.S. and Kamaruzzaman, A.B. (2015) Carbon footprint assessment of a typical low rise office building in Malaysia using building information modelling (BIM). International Journal of Sustainable Building Technology and Urban Development, 6 (3). pp. 157-172.

Shafiq, N. and Nuruddin, M.F. and Khan, S.U. and Ayub, T. (2015) Calcined kaolin as cement replacing material and its use in high strength concrete. Construction and Building Materials, 81. pp. 313-323.

Shafiq, N. and Nuruddin, M.F. and Safdar Gardezi, S.S. and Farhan, S.A. and Al Rawy, H.A.M. (2015) Reduction of embodied CO2 emissions from conventional single storey house in malaysia by recycled materials using building information modeling (BIM). Advances in Environmental Biology, 9 (1). pp. 17-21.

Shafquet, A. and Ismail, I. and Japper-Jaafar, A. and Sulaiman, S.A. and Chala, G.T. (2015) Estimation of gas void formation in statically cooled waxy crude oil using online capacitance measurement. International Journal of Multiphase Flow, 75. pp. 257-266.

Shah, Syed Ayaz Ali and Tang, Tong Boon and Laude, Augustinus and Faye, Ibrahima (2015) Automated detection of microaneurysms using curvelet transform. Investigative Ophthalmology & Visual Science, 56 (7). p. 5266.

Shah, S.N. and Lethesh, K.C. and Mutalib, M.I.A. and Pilus, R.B.M. (2015) Evaluation of thermophysical properties of imidazolium-based phenolate ionic liquids. Industrial and Engineering Chemistry Research, 54 (14). pp. 3697-3705.

Shahid, R. and Muhammad, N. and Gonfa, G. and Toprak, M.S. and Muhammed, M. (2015) Synthesis, COSMO-RS analysis and optical properties of surface modified ZnS quantum dots using ionic liquids. Journal of Physics and Chemistry of Solids, 85. pp. 34-38.

Shaikh, Muhammad Shuaib and Shariff, Azmi Mohd and Bustam, Mohd Azmi and Murshid, Ghulam (2015) Physicochemical properties of aqueous solutions of sodium glycinate in the non-precipitation regime from 298.15 to 343.15 K. Chinese Journal of Chemical Engineering, 23 (3). pp. 536-540.

Shaikh, M.S. and Shariff, A.M. and Bustam, M.A. and Murshid, G. (2015) Measurement and prediction of physical properties of aqueous sodium L-prolinate and piperazine as a solvent blend for CO2 removal. Chemical Engineering Research and Design, 102. pp. 378-388.

Shairi, N.A. and Ahmad, B.H. and Wong, P.W. and Zakaria, Z. (2015) High isolation and absorptive feature in single pole double throw (SPDT) discrete switch design using switchable matched ring resonator. Advanced Science Letters, 21 (1). pp. 93-97.

Shamim, A. and Ghazali, Z. (2015) Customer participation in value co-creation: Can it develop corporate brand experience? Advanced Science Letters, 21 (5). pp. 1197-1201.

Shamsudin, N. and Hussein, S.H. and Nugroho, H. and Ahmad Fadzil, M.H. (2015) Objective assessment of vitiligo with a computerised digital imaging analysis system. Australasian Journal of Dermatology, 56 (4). pp. 285-289.

Shannan, N.M. and Yahaya, N.Z. and Singha, B. and Salam, Z. and Ahmed, K.Y. (2015) Two-diode model for parameters extraction of photovoltaic module under temperature variation. IEICE Electronics Express, 12 (19).

Shehzad, A. and Bashir, M.J.K. and Sethupathi, S. and Lim, J.-W. (2015) An overview of heavily polluted landfill leachate treatment using food waste as an alternative and renewable source of activated carbon. Process Safety and Environmental Protection, 98. pp. 309-318.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. (2015) Optimum temperature on structural growth of multiwalled carbon nanotubes with low activation energy. Diamond and Related Materials, 58. pp. 129-138.

Siddiqui, F.I. and Pathan, D.M. and Osman, S.B.A.B.S. and Pinjaro, M.A. and Memon, S. (2015) Comparison between regression and ANN models for relationship of soil properties and electrical resistivity. Arabian Journal of Geosciences, 8 (8). pp. 6145-6155.

Siti Nur Azella, Z. and Noraini Muti, M. (2015) Microscopy analysis of synthesized monodisperse SiO 2 sphere. Malaysian Journal of Microscopy, 11 (1). pp. 115-120.

Slaiman, Iskandar and Tang, Tong Boon and Hamid, Nor Hisham (2015) Pulse Amplitude and Delay Modulation: Design and performance analysis. Optics Communications, 345. pp. 52-56.

Slaiman, I. and Tang, T.B. and Hamid, N.H. (2015) Pulse Amplitude and Delay Modulation: Design and performance analysis. Optics Communications, 345. pp. 52-56.

Soleimani, H. and Abbas, Z. and Yahya, N. and Soleimani, H. and Sabet, M. and Oechsner, A. and Politis, C. (2015) An optimisation approch to determine the electromagnetic properties of lanthanum iron garnet filled PVDF-polymer composite at microwave frequencies. Digest Journal of Nanomaterials and Biostructures, 10 (3). pp. 895-900.

Subhan, F. and Ahmed, S. and Ashraf, K. and Imran, M. (2015) Extended Gradient RSSI Predictor and Filter for Signal Prediction and Filtering in Communication Holes. Wireless Personal Communications, 83 (1). pp. 297-314.

Sugathan, S.K. and Dominic, D.D. and Ramayah, T. and Ratnam, K.A. (2015) The associating factors and outcomes of green supply chain management implementation â�� from the technological and non-technological perspectives. Advances in Intelligent Systems and Computing, 353. pp. 491-501.

Suhaimi, Hassan and Baheta, Aklilu Tesfamichael (2015) Experimental investigation on heat transfer enhancement by using porous twisted plate as an inserts in a fitted tube. ARPN Journal of Engineering and Applied Sciences, 10 (21). ISSN 1819-6608

Sulaiman, S. and Rambli, D.R.A. and Zuki, F.S.M. (2015) Putting the tactile feedback to Quranic verses and tajweed rules. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17996-18003.

Sulaiman, S.A. and Balamohan, S. and Moni, M.N.Z. and Atnaw, S.M. and Mohamed, A.O. (2015) Feasibility study of gasification of oil palm fronds. Journal of Mechanical Engineering and Sciences, 9. pp. 1744-1757.

Suleman, Humbul and Maulud, Abdulhalim Shah and Man, Zakaria (2015) Review and selection criteria of classical thermodynamic models for acid gas absorption in aqueous alkanolamines. Reviews in Chemical Engineering, 31 (6). pp. 599-639.

Suleman, Humbul and Nasir, Qazi and Maulud, Abdulhalim S and Man, Zakaria (2015) Comparative study of electrolyte thermodynamic models for carbon dioxide solubility in water at high pressure. Chemical Engineering Transactions, 45. pp. 589-594.

Suleman, H. and Nasir, Q. and Maulud, A.S. and Man, Z. (2015) Comparative study of electrolyte thermodynamic models for carbon dioxide solubility in water at high pressure. Chemical Engineering Transactions, 45. pp. 589-594.

Sumra, I.A. and Hasbullah, H.B. and AbManan, J.-L.B. (2015) Attacks on security goals (confidentiality, integrity, availability) in VANET: A survey. Advances in Intelligent Systems and Computing, 306. pp. 51-61.

Sundramoorthy, Jega Divan and Hammonds, Paul and Sabil, Khalik M and Foo, Khor Siak and Lal, Bhajan (2015) Macroscopic observations of catastrophic gas hydrate growth during pipeline operating conditions with or without a kinetic hydrate inhibitor. Crystal Growth & Design, 15 (12). pp. 5919-5929.

Sundramoorthy, Jega Divan and Sabil, Khalik M and Lal, Bhajan and Hammonds, Paul (2015) Catastrophic crystal growth of clathrate hydrate with a simulated natural gas system during a pipeline shut-in condition. Crystal Growth & Design, 15 (3). pp. 1233-1241.

Sundramoorthy, J.D. and Hammonds, P. and Sabil, K.M. and Foo, K.S. and Lal, B. (2015) Macroscopic Observations of Catastrophic Gas Hydrate Growth during Pipeline Operating Conditions with or without a Kinetic Hydrate Inhibitor. Crystal Growth and Design, 15 (12). pp. 5919-5929.

Taha, O.M.A. and Bahrom, M.B. and Taha, O.Y. and Aris, M.S. (2015) Experimental study on two way shape memory effect training procedure for NiTiNOL shape memory alloy. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7847-7851.

Talla, G. and Sahoo, D.K. and Gangopadhyay, S. and Biswas, C.K. (2015) Modeling and multi-objective optimization of powder mixed electric discharge machining process of aluminum/alumina metal matrix composite. Engineering Science and Technology, an International Journal, 18 (3). pp. 369-373.

Tamidi, Athirah bt Mohd and Shaari, KZK and Ganesan, T (2015) Reaction Modeling for Prediction of Hydrogen Production During Biomass Gasification. Engineering Applications of Computational Fluid Dynamics. pp. 1-16.

Tan, LS and Shariff, AM and Lau, KK and Bustam, MA (2015) Impact of high pressure on high concentration carbon dioxide capture from natural gas by monoethanolamine/N-methyl-2-pyrrolidone solvent in absorption packed column. International Journal of Greenhouse Gas Control, 34. pp. 25-30.

Tan, L.S. and Shariff, A.M. and Lau, K.K. and Bustam, M.A. (2015) Impact of high pressure on high concentration carbon dioxide capture from natural gas by monoethanolamine/N-methyl-2-pyrrolidone solvent in absorption packed column. International Journal of Greenhouse Gas Control, 34. pp. 25-30.

Tang, Tong Boon and Bhatti, Mehwish and Laude, Augustinus (2015) Effects of Water Drinking Test on Blood Flow in Optic Nerve Head using LSFG. Investigative Ophthalmology & Visual Science, 56 (7). p. 2743.

Teo, W. and Hor, Y. (2015) Suitability of optimized truss model to predict the FRP contribution to shear resistance for externally bonded FRP strengthened RC beams without internal stirrups. Composites Part B: Engineering, 80. pp. 385-398.

Ting, H. and Chuah, F. and Cheah, J. and Memon, M.A. and Yacob, Y. (2015) Revisiting attitude towards advertising, its antecedent and outcome: A two-stage approach using PLS-SEM. International Journal of Economics and Management, 9 (2). pp. 150-170.

Traini, C. and Proust, J.-N. and Menier, D. and Mathew, M.J. (2015) Distinguishing natural evolution and human impact on estuarine morpho-sedimentary development: A case study from the Vilaine Estuary, France. Estuarine, Coastal and Shelf Science, 163 (PB). pp. 143-155.

Trinh, Thanh H and KuShaari, KuZilati and Basit, Abdul (2015) Modeling the release of nitrogen from controlled-release fertilizer with imperfect coating in soils and water. Industrial & Engineering Chemistry Research, 54 (26). pp. 6724-6733.

Trinh, Thanh H and Kushaari, Kuzilati and Shuib, Anis S and Ismail, Lukman and Azeem, Babar (2015) Modelling the release of nitrogen from controlled release fertiliser: Constant and decay release. Biosystems Engineering, 130. pp. 34-42.

Trinh, T.H. and Kushaari, K. and Basit, A. (2015) Modeling the Release of Nitrogen from Controlled-Release Fertilizer with Imperfect Coating in Soils and Water. Industrial and Engineering Chemistry Research, 54 (26). pp. 6724-6733.

Trinh, T.H. and Kushaari, K. and Shuib, A.S. and Ismail, L. and Azeem, B. (2015) Modelling the release of nitrogen from controlled release fertiliser: Constant and decay release. Biosystems Engineering, 130. pp. 34-42.

Ud Din, I. and Shaharun, M.S. and Subbarao, D. and Naeem, A. (2015) Synthesis, characterization and activity pattern of carbon nanofibers based copper/zirconia catalysts for carbon dioxide hydrogenation to methanol: Influence of calcination temperature. Journal of Power Sources, 274. pp. 619-628.

Uemura, Y. and Matsumoto, R. and Saadon, S. and Matsumura, Y. (2015) A study on torrefaction of Laminaria japonica. Fuel Processing Technology, 138. pp. 133-138.

Ullah, S and Bustam, MA and Ahmad, F and Nadeem, M and Naz, MY and Sagir, M and Shariff, AM (2015) Synthesis and characterization of melamine formaldehyde resins for decorative paper applications. Journal of the Chinese Chemical Society, 62 (2). pp. 182-190.

Ullah, S and Shariff, AM and Bustam, MA and Nadeem, M and Naz, MY and Ayoub, M (2015) Study on effect of benzotriazole and surfactants on corrosion inhibition of copper alloys in sulphuric acid. Int. J. Electrochem. Sci, 10 (11). pp. 9443-9455.

Ullah, H. and Islam, S. and Dennis, L.C.C. and Abdelhameed, T.N. and Khan, I. and Fiza, M. (2015) Approximate solution of two-dimensional nonlinear wave equation by optimal homotopy asymptotic method. Mathematical Problems in Engineering, 2015.

Ullah, R. and Jaafar, J. and Said, A.B.M. (2015) Purify noisy data from annotated images using Montylingua and control redundant term. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 18193-18199.

Ullah, Z. and Bustam, M.A. and Man, Z. and Muhammad, N. and Khan, A.S. (2015) Synthesis, characterization and the effect of temperature on different physicochemical properties of protic ionic liquids. RSC Advances, 5 (87). pp. 71449-71461.

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Khamidi, M.F. and Farhan, S.A. and Gardezi, S.S.S. (2015) 4D BIM application in AEC industry: Impact on integrated project delivery. Research Journal of Applied Sciences, Engineering and Technology, 10 (5). pp. 547-552.

Ur Rehman, M.Z. and Baharudin, Z. and Zakariya, M.A. and Khir, M.H.M. and Jilani, M.T. (2015) RF MEMS based tunable bandpass filter using QMSIW resonator. Optoelectronics and Advanced Materials, Rapid Communications, 9 (11-12). pp. 1498-1502.

Usman Dalhatu, D.B. and Abdullah, A. and Ibrahim, Y.M. and Abideen, A.A. (2015) Awareness level of north-west zone of Nigeria retail customers towards Islamic banking. Advanced Science Letters, 21 (5). pp. 1460-1463.

Wai, C.K. and Yusup, S. and Kapor, N.Z.A. and Chok, C. (2015) Catalytic pyrolysis of Oil Palm Frond (OPF) using Graphite Nanofiber (GNF) as catalysts. Chemical Engineering Transactions, 45. pp. 1543-1548.

Waris, M. and Liew, M.S. and Faris, M. and Idrus, A. (2015) An exploratory study on enablers and barriers for onsite mechanisation in the Malaysian construction industry. Malaysian Construction Research Journal, 16 (1). pp. 15-30.

Wong, MK and Bustam, MA and Shariff, AM (2015) Chemical speciation of CO2 absorption in aqueous monoethanolamine investigated by in situ Raman spectroscopy. International Journal of Greenhouse Gas Control, 39. pp. 139-147.

Wong, M.K. and Bustam, M.A. and Shariff, A.M. (2015) Chemical speciation of CO2 absorption in aqueous monoethanolamine investigated by in situ Raman spectroscopy. International Journal of Greenhouse Gas Control, 39. pp. 139-147.

Ya, H.H. and El-Sobky, H. (2015) An experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading. Jurnal Teknologi, 74 (10). pp. 111-119.

Yaqub, A. and Isa, M.H. and Ajab, H. (2015) Electrochemical degradation of polycyclic aromatic hydrocarbons in synthetic solution and produced water using a Ti/SnO2-Sb2O5-RuO2 anode. Journal of Environmental Engineering (United States), 141 (4).

Yasir Bashir, Deva Ghosh, Chow Weng Sum, . (2015) Detection of Fault and Fracture Using Seismic Diffraction and Behaviour of Diffraction Hyperbola with Velocity and Time. Detection of Fault and Fracture Using Seismic Diffraction and Behaviour of Diffraction Hyperbola with Velocity and Time.

Yasir Bashir, Deva Ghosh, S.Y.M Alashloo, Chow Weng Sum, . (2015) Effect of frequency and Migration Aperture on Seismic Diffraction Imaging. Effect of frequency and Migration Aperture on Seismic Diffraction Imaging.

Yavari, S. and Malakahmad, A. and Sapari, N.B. (2015) Biochar efficiency in pesticides sorption as a function of production variablesâ��a review. Environmental Science and Pollution Research, 22 (18). pp. 13824-13841.

Yavari, S. and Malakahmad, A. and Sapari, N.B. (2015) A Review on Phytoremediation of Crude Oil Spills. Water, Air, and Soil Pollution, 226 (8).

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. (2015) Identification of slow drift motions of a truss spar platform using parametric Volterra model. Ocean Engineering, 109. pp. 654-668.

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. (2015) Improving the modeling capacity of Volterra model using evolutionary computing methods based on Kalman smoother adaptive filter. Applied Soft Computing Journal, 35. pp. 695-707.

Ye, K.Z. and Kyaw, H.A. and Portnov, E.M. and Bain, A.M. and Vasant, P. (2015) The efficiency of detecting the failures and troubleshooting while applying technical diagnostics for multi-computer systems. Archives of Control Sciences, 25 (1). pp. 87-107.

Yiin, C.L. and Yusup, S. and Quitain, A.T. and Uemura, Y. (2015) Physicochemical properties of low transition temperature mixtures in water. Chemical Engineering Transactions, 45. pp. 1525-1530.

Yousif, A.A. and Sulaiman, S.A. and Nasif, M.S. (2015) Experimental study on laminar flame speeds and Markstein length of propane air mixtures at atmospheric conditions. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2188-2198.

Yu, S.Y. and Choi, H.S. and Lee, S.K. and Park, K.-S. and Kim, D.K. (2015) Nonlinear soil parameter effects on dynamic embedment of offshore pipeline on soft clay. International Journal of Naval Architecture and Ocean Engineering, 7 (2). pp. 227-243.

Yusof, Z.A.M. and Ahmed, I. and Khan, M.S. and Hussain, S.A. and Hussain, A. and Mutalib, I.B.A. and Balkhair, K.S. and Albeirutty, M.H. (2015) Thermal Evaluation of Diesel/Hydrogen Peroxide Fuel Blend. Chemical Engineering and Technology, 38 (12). pp. 2170-2180.

Yussiff, A.-S. and Wan Ahmad, W.F. and Mustapha, E.E. (2015) Exploring students perceptions of teaching, social, cognitive presences, effectiveness for teamwork and learning outcomes. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17749-17757.

Yusuf, N.R. and Kamil, R.N.M. and Yusup, S. (2015) Response surface methodology approach for optimisation of alkaline hydrolysis of Jatropha Curcas oil via microwave assisted. Chemical Engineering Transactions, 45. pp. 1513-1518.

Yusup, Suzana and Yiin, Chung Loong and Tan, Chiang Jinn and Abdullah, Bawadi (2015) Determination of Optimum Condition for the Production of Rice Husk-Derived Bio-oil by Slow Pyrolysis Process. Process Design Strategies for Biomass Conversion Systems. pp. 329-340.

Yusup, Suzana and Zabiri, Haslinda (2015) Australian Journal of. Australian Journal of Basic and Applied Sciences, 9 (36). pp. 549-555.

Yusup, Suzana and Zabiri, Haslinda and Suliman, MM and Khan, Zakir (2015) Variable Influence Analysis of an In-Situ Catalytic Adsorption (ICA) Steam Gasification using Multivariate PLS. Australian Journal of Basic and Applied Sciences, 9 (37). pp. 85-89.

Zafar, R. and Malik, A.S. and Kamel, N. and Dass, S.C. and Abdullah, J.M. and Reza, F. and Abdul Karim, A.H. (2015) Decoding of visual information from human brain activity: A review of fMRI and EEG studies. Journal of Integrative Neuroscience, 14 (2). pp. 155-168.

Zafar, Raheel and Malik, Aamir Saeed and Kamel , Nidal and Dass, Sarat Chandra and Abdullah, Jafri Malin and Reza, Faruque and Abdul Karim, Ahmad Helmy (2015) Decoding of visual information from human brain activity_A review of fMRI and EEG studies. Journal of Integrative Neuroscience.

Zainal A., E.Z. and Ibrahim, A.A. and Aziz, A.R.A. and Zulkifli, S.A. (2015) Effect of motoring voltage on compression ratio of a free-piston linear generator engine. Journal of Mechanical Engineering and Sciences, 8. pp. 1393-1400.

Zakaria, M.S. and Hassan, S. and Nor, M.F.M. (2015) Calorific value of the sewage sludge in the thermal dryer. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10245-10248.

Zamri, N.H. and Ismail, L. and Abdul Rahim, R.H. and Siyal, A.A. and Man, Z. and Azizli, K.A. (2015) Kinetics of geopolymer solidification study using texture analyzer. Materials Science Forum, 803. pp. 75-80.

Zangeneh, H. and Zinatizadeh, A.A.L. and Habibi, M. and Akia, M. and Hasnain Isa, M. (2015) Photocatalytic oxidation of organic dyes and pollutants in wastewater using different modified titanium dioxides: A comparative review. Journal of Industrial and Engineering Chemistry, 26. pp. 1-36.

Zarif, S. and Faye, I. and Rohaya, D. (2015) Image completion based on statistical texture analysis. Journal of Electronic Imaging, 24 (1).

Zarif, S. and Faye, I. and Rohaya, D. (2015) Image completion: Survey and comparative study. International Journal of Pattern Recognition and Artificial Intelligence, 29 (3).

Zuhar Zahir Tuan Harith, Khairul Arifin Mohd Noh, . (2015) ISSUES AND CHALLENGES IN INTERPRETING 2D RESISTIVITY IMAGE. ISSUES AND CHALLENGES IN INTERPRETING 2D RESISTIVITY IMAGE.

Zulkarnain, N.F. and Ibrahim, T. and Hashim, H.Z. (2015) Design and modelling of electrical machine for ceiling fan system. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10174-10183.

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2015) Operation and control of split-parallel, through-theroad hybrid electric vehicle with in-wheel motors. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2793-2808.

irshad, kashif and Habib, Khairul and Nagarajan, T and Saha, Bidyut B. (2015) Performance analysis of a thermoelectric air duct system for energy-efficient buildings. Energy , 91. pp. 1009-1017. ISSN 3605442

irshad, kashif and Habib, Khairul and basrawi, firdaus and Nagarajan, T and saidur, R and Saha, Bidyut B. (2015) Thermal comfort study of a building equipped with thermoelectric air duct system for tropical climate. Applied Thermal Engineering, 91. pp. 1141-1155. ISSN 13594311

Book Section

Jaafar, Jafreezal and Uzair , Iqbal Janjua and Lai, Fong Woon (2015) Software Effective Risk Management: An Evaluation of Risk Management Process Models and Standards. In: Information Science and Applications. Lecture Notes in Electrical Engineering, pp. 837-844.

Marneni, Narahari and Tippa, Sowmya and Pendyala, Rajashekhar and Nayan, M Yunus (2015) Ramped Temperature Effect on Unsteady MHD Natural Convection Flow Past an Infinite Inclined Plate in the Presence of Radiation, Heat Source and Chemical Reaction. In: Recent Advances in Applied and Theoretical Mechanics. WSEAS. ISBN 978-1-61804-304-7

Mumtaz, Wajid and Malik, Aamir Saeed and Azhar Ali, Syed Saad and Yasin Mohd, Mohd Azhar (2015) A Study to Investigate Different EEG Reference Choices in Diagnosing Major Depressive Disorder. In: Neural Information Processing. Springer International Publishing.

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) Swarm Intelligence-Based Optimization for PHEV Charging Stations. In: Handbook of Research on Swarm Intelligence in Engineering. IGI Global, pp. 374-405. ISBN 978-1-4666-8291-7

Suman, Shipra and Nicolas, Walter and Hussin, Fawnizu Azmadi and Malik, Aamir Saeed and Ho, Shiaw Hooi and Goh, Khean Lee and Hilmi, Ida (2015) Optimum Colour Space Selection for Ulcerated Regions Using Statistical Analysis and Classification of Ulcerated Frames from WCE Video Footage. In: Neural Information Processing. Springer International Publishing.

Zafar, Raheel and Malik, Aamir Saeed and Amin, Hafeez Ullah and Kamel , Nidal and Dass, Sarat Chandra (2015) Discrimination of Brain States Using Wavelet and Power Spectral Density. In: Neural Information Processing. Springer International Publishing.

Conference or Workshop Item

Abbas, T. and Nazir, S. and Mrugalska, B. and Mutalib, M. (2015) Mercury emissions, hazards and preventive measures: A review. In: UNSPECIFIED.

Abbasi, A.Z. and Ting, D.H. and Jamek, A.B.S.A. (2015) An integrated conceptual model for predicting behavioral learning triggered by video-game engagement: A mediating role of observational learning. In: UNSPECIFIED.

Abbasi, U.F. and Awang, A. and Hamid, N.H. (2015) A Cross-Layer Opportunistic MAC/routing Protocol to improve reliability in WBAN. In: UNSPECIFIED.

Abdul Hadi, Siti Hajaratul Akma and Mukhtar, Hilmi and Abdul Mannan, Hafiz and Murugesan, Thanabalan (2015) Polyethersulfone/polyvinyl acetate blend membrane for CO2/CH4 gas separation. In: Applied Mechanics and Materials.

Abdul Hadi, M.H. and Shairi, N.A. and Ahmad, B.H. and Wong, P.W. (2015) Isolation improvement of discrete PIN diode switch using square dumbbell Defected Ground Structure. In: UNSPECIFIED.

Abdul Halim, Hairul Nazirah and Azmi, Mohd Shariff and Bustam, Mohammad Azmi (2015) Effect of liquid flow rate and amine concentration on CO2 removal from natural gas at high pressure operation in packed absorption column. In: Applied Mechanics and Materials.

Abdul Jamak, A.B.S. and Shamim, A. and Ghazali, Z. (2015) Impact of customer citizenship behavior on corporate brand experience. In: UNSPECIFIED.

Abdul-Kadir, N.A. and Mat Safri, N. and Othman, M.A. and Embong, A.M. (2015) Human heart oscillatory behavior during atrial fibrillation based on second order system. In: UNSPECIFIED.

Abdul-Wahhab, H.A. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2015) Modeling of diesel/CNG mixing in a pre-injection chamber. In: UNSPECIFIED.

Abdullah, M.Z. and Ismail, S.S. (2015) Modifications of chemical functional groups of Pandanus amaryllifolius Roxb and its effect towards biosorption of heavy metals. In: UNSPECIFIED.

Abubakar, M.Y. and Jung, L.T. and Foong, O.M. (2015) Two channel quantum security modelling focusing on quantum key distribution technique. In: UNSPECIFIED.

Adil, M. and Zaid, H.M. and Chuan, L.K. and Alta'Ee, A.F. and Latiff, N.R.A. (2015) Microscopic evolution of dielectric nanoparticles at different calcination temperatures synthesized via sol-gel auto-combustion. In: UNSPECIFIED.

Ahmad, F. and Aslam, M. and Altaf, K. and Shirazi, I. (2015) Effects of mold geometry on fiber orientation of powder injection molded metal matrix composites. In: UNSPECIFIED.

Ahmad, F. and Ullah, S. and Aziz, H. and Omar, N.S. (2015) Thermal performance of glass fiber reinforced intumescent fire retardant coating for structural applications. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) Modelling educational games through multi-domain framework in light of game play. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) Towards an effective modelling and development of educational games with subject-matter: A multi-domain framework. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) Understanding game play domain: An interpretive approach towards modelling educational games with multi-domain framework. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) An interpretive approach to model educational games: Learning theories domain using multi-domain framework. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) A multi-domain framework: A qualitative study evolving understanding of subject-matter in modelling educational games. In: UNSPECIFIED.

Ahmad, R.F. and Malik, A.S. and Kamel, N. and Reza, F. (2015) Object categories specific brain activity classification with simultaneous EEG-fMRI. In: UNSPECIFIED.

Ahmad, R.F. and Malik, A.S. and Kamel, N. and Reza, F. and Abdul Karim, A.H. (2015) Optimization and development of concurrent EEG-fMRI data acquisition setup for understanding neural mechanisms of brain. In: UNSPECIFIED.

Ahmad, R.F. and Malik, A.S. and Qayyum, A. and Kamel, N. (2015) Disaster monitoring in urban and remote areas using satellite stereo images: A depth estimation approach. In: UNSPECIFIED.

Ahmad, Rana Fayyaz and Malik, Aamir Saeed and Kamel , Nidal and Reza, Faruque (2015) Object categories specific brain activity classification with simultaneous EEG-fMRI. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Ahmad, Rana Fayyaz and Malik, Aamir Saeed and Kamel , Nidal and Reza, Faruque and Abdul Karim, Ahmad Helmy (2015) Optimization and development of concurrent EEG-fMRI data acquisition setup for understanding neural mechanisms of brain. In: 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Pisa.

Ahmad, Rana Fayyaz and Malik, Aamir Saeed and Qayyum, Abdul and Kamel, Nidal (2015) Disaster monitoring in urban and remote areas using satellite stereo images: A depth estimation approach. In: 2015 IEEE 11th International Colloquium on Signal Processing & Its Applications (CSPA).

Ahmed, S. and Ting, D.H. and Johl, S.K. and Abdul Jamak, A.B.S.B. (2015) Game changing strategies for retailers: How to create utilitarian offers for shoppers. In: UNSPECIFIED.

Ahsanullah and Sulaiman, S. and Mahmood, A.K. and Khan, M. (2015) Investigation of fingertip contact area and shape for precise target selection on multi-touch screen. In: UNSPECIFIED.

Akbarzadeh, Omid and Mohd Zabidi, Noor Asmawati and Abdullah, Bawadi and Subbarao, Duvvuri (2015) Synthesis of Co/CNTs Catalyst via Strong Electrostatic Adsorption: Effect of Calcination Condition. In: Advanced Materials Research.

Akbarzadeh, Omid and Zabidi, Noor Asmawati Mohd and Abdullah, Bawadi and Subbarao, Duvvuri (2015) Dispersion of Co/CNTs via strong electrostatic adsorption method: Thermal treatment effect. In: AIP Conference Proceedings.

Akbarzadeh, O. and Zabidi, N.A.M. and Abdullah, B. and Subbarao, D. (2015) Dispersion of Co/CNTs via strong electrostatic adsorption method: Thermal treatment effect. In: UNSPECIFIED.

Al-Arabiat, D. and Wan Ahmad, W.F. and Sarlan, A. (2015) Review on critical factors of adopting cloud mobile learning. In: UNSPECIFIED.

Al-Dujaili, Abdullah and Lo, Hai Hiung and Tan, Shawn (2015) ASH1: a Stack-Based Input/ Output Processor for USB Operations. In: IEEE International Conference on Circuit And Systems, 2nd Sep, 2015 to 4th Sep 2015, Langkawi.

Al-Kayiem, A.H.H. and Ibrahim, M.A. (2015) The influence of the equivalent hydraulic diameter on the pressure drop prediction of annular test section. In: UNSPECIFIED.

Al-Nasheri, A. and Ali, Z. and Muhammad, G. and Alsulaiman, M. and Almalki, K.H. and Mesallam, T.A. and Farahat, M. (2015) Voice pathology detection with MDVP parameters using Arabic voice pathology database. In: UNSPECIFIED.

Al-Qutami, T.A.H. and Ibrahim, R. (2015) Design of a Fuzzy Logic process Controller for flow applications and implementation in series tanks Pilot Plant. In: UNSPECIFIED.

Al-Shargie, Fares and Tang, Tong Boon and Badruddin, Nasreen and Kiguchi, Masashi (2015) Simultaneous measurement of EEG-fNIRS in classifying and localizing brain activation to mental stress. In: 2015 IEEE International Conference on Signal and Image Processing Applications (ICSIPA).

Al-Wakeel, H.B. and Karim, Z.A.A. and Al-Kayiem, H.H. (2015) Optimizing electro-thermo Helds for soot oxidation using microwave heating and metal. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Wan Abdullah Zawawi, N.A. (2015) The characteristics of coordination process in construction projects. In: UNSPECIFIED.

Alhussian, H. and Zakaria, N. (2015) An efficient zero-laxity based real-time multiprocessor scheduling algorithm. In: UNSPECIFIED.

Ali, I. and Khir, M.H.M. and Baharudin, Z. and Ashraf, K. (2015) CMOS-MEMS multiple resonant vibration energy harvester for wireless sensor network. In: UNSPECIFIED.

Ali, J.S.M. and Kannan, R. and Romlie, M.F. (2015) New cascaded multilevel converter topology based on basic unit with reduction of DC sources. In: UNSPECIFIED.

Ali, M. and Jung, L.T. (2015) Confidentiality based file attributes and data classification using TsF-KNN. In: UNSPECIFIED.

Ali, W. and Abdullah, A. (2015) The long-run relationship between economic growth, financial development, trade openness and CO2 emissions in Malaysia. In: UNSPECIFIED.

Alkali, A.U. and Ginta, T.L. and Abdul-Rani, A.M. (2015) Experimental investigation and 3D finite element prediction of temperature distribution during travelling heat sourced from oxyacetylene flame. In: UNSPECIFIED.

Almahasneh, H. and Kamel, N. and Walter, N. and Malik, A.S. (2015) R-principal subspace for driver cognitive state classification. In: UNSPECIFIED.

Almahasneh, Hossam and Kamel , Nidal and Nicolas, Walter and Malik, Aamir Saeed (2015) r-Principal Subspace for Driver Cognitive State Classification. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Almomani, M.A.T. and Basri, S. and Mahmood, A.K.B. and Bajeh, A.O. (2015) Software development practices and problems in Malaysian small and medium software enterprises: A pilot study. In: UNSPECIFIED.

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H.B. and Sebastian, P. (2015) Secondary coverage configuration to support surveillance monitoring. In: UNSPECIFIED.

Ameen, Mohamed Abul Hassan and Malik, Aamir Saeed and Nicolas, Walter and Faye , Ibrahima and Nordin, Nadira (2015) Reliability of bench-mark datasets for crowd analytic surveillance. In: 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

Amin, A. and Rehman, M. and Basri, S. and Hassan, M.F. (2015) A proposed conceptual framework of programmer's creativity. In: UNSPECIFIED.

Amin, H.U. and Malik, A.S. and Badruddin, N. and Kamel, N. and Hussain, M. (2015) Effects of stereoscopic 3D display technology on event-related potentials (ERPs). In: UNSPECIFIED.

Amin, H.U. and Malik, A.S. and Mumtaz, W. and Badruddin, N. and Kamel, N. (2015) Evaluation of passive polarized stereoscopic 3D display for visual & mental fatigues. In: UNSPECIFIED.

Amin, Hafeez Ullah and Malik, Aamir Saeed and Badruddin , Nasreen and Kamel , Nidal and Hussain, Mohammad (2015) Effects of stereoscopic 3D display technology on event-related potentials (ERPs). In: 2015 7th International IEEE/EMBS Conference on Neural Engineering (NER).

Amin, Hafeez Ullah and Malik, Aamir Saeed and Mumtaz, Wajid and Badruddin , Nasreen and Kamel , Nidal (2015) Evaluation of passive polarized stereoscopic 3D display for visual & mental fatigues. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Amir, A. and Mamat, O. (2015) Effects of sintering temperatures on microstructure and wear resistance of iron-silica composite. In: UNSPECIFIED.

Amir, N. and Othman, W.M.S.W. and Ahmad, F. (2015) Fire resistance properties of ceramic wool fiber reinforced intumescent coatings. In: UNSPECIFIED.

Ardakani, S.E.M. and Singh, B.S.M. and Mohammed, N.M. (2015) Improving the quality of graphene oxide prepared by Hummer's method by using centrifugation. In: UNSPECIFIED.

Ariffin, K.A.Z. and Jaafar, J. and Mahmood, A.K. and Shamsuddin, S. (2015) Tracking file's metadata from computer memory analysis. In: UNSPECIFIED.

Arogundade, A.I. and Megat-Yusoff, P.S.M. and Bhat, A.H. and Faiz, A. (2015) Characterization of red mud-epoxy intumescent char using surface imaging and micro analysis. In: UNSPECIFIED.

Asrul, M. and Othman, M. and Zakaria, M. (2015) Surface morphology changes of lignin filled natural rubber latex films investigated using AFM in relation to tensile strengths. In: UNSPECIFIED.

Awais, M. and Badruddin, N. and Drieberg, M. (2015) A non-invasive approach to detect drowsiness in a monotonous driving environment. In: UNSPECIFIED.

Awais, M. and Walter, N. and Faye, I. and Saad, M.N. and Ramanathan, A. and Zain, R.M. (2015) Analysis of auto-fluorescence images for automatic detection of abnormalities in oral cavity. In: UNSPECIFIED.

Azahar, T.F. and Mahinderjit-Singh, M. and Hassan, R. (2015) RFID-enabled supply chain detection using clustering algorithms. In: UNSPECIFIED.

Azam, S.F.M. and Drieberg, M. and Lai, F.-W. (2015) Ant Colony Optimization of feeder bus routes for electric train service. In: UNSPECIFIED.

Aziz, A.A. and Şekercioğlu, Y. A. (2015) The impact of clustering on the average path length in wireless sensor networks. In: 2014 IEEE 2nd International Symposium on Telecommunication Technologies (ISTT), 24-26 Nov. 2014, Langkawi, MALAYSIA.

Aziz, H. and Ahmad, F. and Yusoff, P.S.M.M. and Zia-ul-Mustafa, M. (2015) Fire performance, microstructure and thermal degradation of an epoxy based nano intumescent fire retardant coating for structural applications. In: UNSPECIFIED.

Baheta, A.T. and Hassan, S. and Reduan, A.R.B. and Woldeyohannes, A.D. (2015) Performance investigation of transcritical carbon dioxide refrigeration cycle. In: UNSPECIFIED.

Bahrami, N. and Dousi, N. and Lashari, A. (2015) Evaluation of damage mechanisms in tight gas reservoirs: Integration of laboratory experiments and field data with numerical simulation. In: UNSPECIFIED.

Bahrami, N. and Soroush, S. and Hossain, M. and Lashari, A. and Daloma, M. and Kabir, A. (2015) Evaluation of damage mechanisms in tight gas reservoirs: Field example from perth Basin. In: UNSPECIFIED.

Baig, M.Z. and Javed, E. and Ayaz, Y. and Afzal, W. and Gillani, S.O. and Naveed, M. and Jamil, M. (2015) Classification of left/right hand movement from EEG signal by intelligent algorithms. In: UNSPECIFIED.

Balaji, M. and Balaji, V. and Chandrasekaran, M. and Khan, M.K.A.A. and Elamvazuthi, I. (2015) Robotic Training to Bridge School Students with Engineering. In: UNSPECIFIED.

Balaji, V. and Balaji, M. and Chandrasekaran, M. and Khan, M.K.A.A. and Elamvazuthi, I. (2015) Optimization of PID Control for High Speed Line Tracking Robots. In: UNSPECIFIED.

Balulla, S. and Padmanabhan, E. and Over, J. (2015) Comparative study of microfacies variation in two samples from the Chittenango member, Marcellus shale subgroup, western New York state, USA. In: UNSPECIFIED.

Bamatraf, S. and Hussain, M. and Aboalsamh, H. and Mathkour, H. and Malik, A.S. and Amin, H.U. and Muhammad, G. and Qazi, E.-U.-H. (2015) A system based on 3D and 2D educational contents for true and false memory prediction using EEG signals. In: UNSPECIFIED.

Bamatraf, Saeed and Hussain, Mohammad and Aboalsamh, Hatim and Mathkour, Hassan and Malik, Aamir Saeed and Amin, Hafeez Ullah and Muhammad, Ghulam and Qazi, Emad-Ul-Haq (2015) A system based on 3D and 2D educational contents for true and false memory prediction using EEG signals. In: 2015 7th International IEEE/EMBS Conference on Neural Engineering (NER).

Ban, Zhen Hong and Lau, Kok Keong and Azmi, Mohd Sharif (2015) Bubble Nucleation and Growth of Dissolved Gas in Solution Flowing Across a Cavitating Nozzle. In: Applied Mechanics and Materials.

Ban, Zhen Hong and Lau, Kok Keong and Azmi, Mohd Shariff (2015) Modelling of Bubble Growth in Supersaturated Solution using Computational Fluid Dynamics-Population Balance Model (CFD-PBM) Approach. In: Defect and Diffusion Forum.

Bano, S. and Ting, D.H. (2015) Digital era generation: Zhai Nan and Zhai Nv blessing or curse. In: UNSPECIFIED.

Bashiri, Robabeh and Mohamed, Norani Muti and Fai Kait, Chong and Sufian, Suriati (2015) Influence of hydrolysis rate on properties of nanosized TiO2 synthesized via sol-gel hydrothermal. In: Advanced Materials Research.

Bashiri, Robabeh and Mohamed, Norani Muti and Kait, Chong Fai and Sufian, Suriati (2015) Effect of heat treatment on the physical properties of bimetallic doped catalyst, Cu-Ni/TiO2. In: AIP Conference Proceedings.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. (2015) Effect of heat treatment on the physical properties of bimetallic doped catalyst, Cu-Ni/TiO 2. In: UNSPECIFIED.

Bayuaji, R. and Biyanto, T.R. and Irawan, S. (2015) Design of cement plant waste heat recovery generation. In: UNSPECIFIED.

Bhayo, B.A. and Al-Kayiem, H.H. and Yahaya, N.Z. (2015) Performance investigation of the S-rotors. In: UNSPECIFIED.

Biyanto, T.R. and Natawiria, A.D.S. and Kusuma, F. and Musyafa, A. and Noriyati, R.D. and Costa, S.D. and Irawan, S. (2015) The effects of test interval on safety instrumented function (SIF) according to Safety Integrity Level (SIL) value on three phase separator application. In: UNSPECIFIED.

Borhan, A. and Thangamuthu, S. and Taha, M.F. and Ramdan, A.N. (2015) Development of activated carbon derived from banana peel for CO2 removal. In: UNSPECIFIED.

Candra, H. and Yuwono, M. and Chai, R. and Handojoseno, A. and Elamvazuthi, I. and Nguyen, H.T. and Su, S. (2015) Investigation of window size in classification of EEG-emotion signal with wavelet entropy and support vector machine. In: UNSPECIFIED.

Chimeremeze, O.H. and Sulaiman, S. and Rambli, D.R.A. and Mean, F.O. (2015) Haptic exploratory interactions in foot reflexology practice from the practitioners' perspectives. In: UNSPECIFIED.

Chuan, N.K. and Sivaji, A. and Ahmad, W.F.W. (2015) Proposed Usability Heuristics for Testing Gestural Interaction. In: UNSPECIFIED.

Chughtai, O. and Badruddin, N. and Awang, A. (2015) Distributed on-demand multi-optional routing protocol in multi-hop wireless networks. In: UNSPECIFIED.

Chughtai, O. and Badruddin, N. and Awang, A. (2015) A congestion-aware and energy efficient traffic Load balancing Scheme for routing in WSNs. In: UNSPECIFIED.

Chung, T.D. and Ibrahim, R.B. and Asirvadam, V.S. and Saad, N.B. and Hassan, S.M. (2015) Simulation of WirelessHART networked control system with packet dropout. In: UNSPECIFIED.

Dahalan, A.A. and Muthuvalu, M.S. and Sulaiman, J. (2015) Half-sweep successive over relaxation iterative method to solve two-point fuzzy boundary value problems. In: UNSPECIFIED.

Dasan, Y.K. and Bhat, A.H. and Faiz, A. (2015) Morphological and spectroscopic analysis of cellulose nanocrystals extracted from oil palm empty fruit bunch fiber. In: UNSPECIFIED.

Daud, H. and Razali, R. and Jung, L.T. and Zaida, S. (2015) Bayesian Islamic medication expert system (B-IMES). In: UNSPECIFIED.

Din, W.I.S.W. and Yahya, S. and Taib, M.N. and Yassin, A.I.M. and Razali, R. (2015) The combinations of selected parameters to prolong the network lifetime for cluster head selection in wireless sensor network. In: UNSPECIFIED.

Elaina, N.S. and Malik, A. and Badruddin, N. and Abdullah, J.M. and Reza, M.F. (2015) Somatosensory source localization for the magnetoencephalography (MEG) inverse problem in patients with brain tumor. In: UNSPECIFIED.

Elaina, Nor Safira and Malik, Aamir Saeed and Badruddin , Nasreen and Abdullah, Jafri Malin and Reza, Faruque (2015) Somatosensory source localization for the magnetoencephalography (MEG) inverse problem in patients with brain tumor. In: 2015 2nd International Conference on Biomedical Engineering (ICoBE).

Elmahdy, A.E. and Yahya, N. and Kamel, N.S. and Shahid, A. (2015) Epileptic seizure detection using singular values and classical features of EEG signals. In: UNSPECIFIED.

Eskandar, A. and Mohamed, N.M. (2015) Microscopy of hierarchically organized TiO 2 photoelectrode for dye solar cells. In: UNSPECIFIED.

Esmaeili, A. and Ayoub, M.A. (2015) Local thermal effect on vapor extraction (VAPEX) for heavy oil enhanced recovery. In: UNSPECIFIED.

Ezechi, E.H. and Kutty, S.R.B.M. and Malakahmad, A. and Isa, M.H. and Aminu, N. and Salihi, I.U. (2015) Removal of methylene blue from dye effluent using ageratum conyzoide leaf powder (ACLP). In: UNSPECIFIED.

Ezechi, E.H. and Kutty, S.R.B.M. and Malakahmad, A. and Salihi, I.U. and Aminu, N. (2015) Determination of optimum range for hexavalent chromium Cr(VI) removal using ageratum conyzoide leaf powder (ACLP). In: UNSPECIFIED.

Faye, I. (2015) Students' perception in the use of self-made YouTube videos in teaching Mathematics. In: UNSPECIFIED.

Firmansyah and Aziz, A.R.A. and Heikal, M.R. (2015) The combustion behavior of diesel/CNG mixtures in a constant volume combustion chamber. In: UNSPECIFIED.

Firmansyah, F. and Ayandotun, W.B. and Zainal, E.Z. and Aziz, A.A.R.A. and Heika, M.R. (2015) Performance of CO2 enrich CNG in direct injection engine. In: UNSPECIFIED.

Fudzin, A.F. and Majid, M.A.A. (2015) Reliability and availability analysis for robot subsystem in automotive assembly plant: A case study. In: UNSPECIFIED.

Gafare, M. and Khir, M.H.M. and Rabih, A. and Ahmed, A. and Dennis, J.O. (2015) Modeling and simulation of polysilicon piezoresistors in a CMOS-MEMS resonator for mass detection. In: UNSPECIFIED.

Ganesan, Timothy and Elamvazuthi, Irraivan and Vasant, Pandian and Shaari, Ku Zilati Ku (2015) Multiobjective Optimization of Bioactive Compound Extraction Process via Evolutionary Strategies. In: Intelligent Information and Database Systems: 7th Asian Conference, ACIIDS 2015, Bali, Indonesia, March 23-25, 2015, Proceedings, Part II 7.

Ghazali, Z. and Zahid, M. (2015) Environmental sustainability: Carbon emission reduction strategies and reporting among Malaysian construction companies. In: UNSPECIFIED.

Gholami, Z. and Abdullah, A.Z. and Gholami, F. and Vakili, M. (2015) Modified silica-based heterogeneous catalysts for etherification of glycerol. In: UNSPECIFIED.

Habib, I. and Badruddin, N. and Drieberg, M. (2015) Delay-based load-balancing routing (DLBR) algorithm for wireless ad-hoc networks. In: UNSPECIFIED.

Habib, K. (2015) Performance investigation of a waste heat driven pressurized adsorption refrigeration cycle. In: UNSPECIFIED.

Habib, K. and Assadi, M.K. and Zainudin, M.H.B. (2015) Study of solar driven silica gel-water based adsorption chiller. In: UNSPECIFIED.

Haider, N. and Imran, M. and Younis, M. and Saad, N. and Guizani, M. (2015) A novel mechanism for restoring actor connected coverage in wireless sensor and actor networks. In: UNSPECIFIED.

Hailegiorgis, Sintayehu Mekuria and Mahadzir, Shuhaimi and Subbarao, Duvvuri (2015) Reaction kinetics study for microwave energy pretreated Jatropha curcas L in-situ transesterification. In: ICGSCE 2014: Proceedings of the International Conference on Global Sustainability and Chemical Engineering.

Hani, Ahmad Fadzil M and Feng, Ying Xing and Tang, Tong Boon and Kiguchi, Masashi (2015) Assessment of brain haemodynamic responses using optical topography modality. In: 2015 2nd International Conference on Biomedical Engineering (ICoBE).

Hani, A.F.M. and Feng, Y.X. and Tang, T.B. and Kiguchi, M. (2015) Assessment of brain haemodynamic responses using optical topography modality. In: UNSPECIFIED.

Hanif, M.F. and Ul Mustafa, M.R. and Hashim, A.M. and Yusof, K.W. (2015) Spatio-temporal change analysis of Perak river basin using remote sensing and GIS. In: UNSPECIFIED.

Haruna, A.A. and Jung, L.T. and Zakaria, N. and Okitsu, J. (2015) Performance comparison of thermal aware job scheduling based on multi priorities on computational grid. In: UNSPECIFIED.

Hasan, M.K. and Karim, S.A.A. and Sulaiman, J. (2015) Graphical analysis of Rosenzweig-MacArthur model via adams-moultan and fourth order Runge-Kutta methods. In: UNSPECIFIED.

Hashim, N. and Mamat, O. (2015) Study on the influence of volume size of the milling jar in purifying Tronoh silica sand using ball milling process. In: UNSPECIFIED.

Hasni, M.M. and Majid, Z.A. and Senu, N. (2015) Direct 4-point 1-step block method for solving Dirichlet boundary value problem. In: UNSPECIFIED.

Hassan, Luqman Hakim and Ku Shaari, Ku Zilati and Man, Zakaria (2015) Urea hardness optimization in a fluidized bed coating equipment using Taguchi design method. In: Applied mechanics and materials.

Hassan, M Fadzil and Abidin, Ahmad Izuddin B Zainal and Arshad, Noreen Izza Bt and Shariff, Azmi M and Yew, Kwang Hooi (2015) A generic ontology methodology and factors to address design consistency. In: 2015 5th International Conference on IT Convergence and Security (ICITCS).

Hassan, M.A. and Malik, A.S. and Nicolas, W. and Faye, I. and Nordin, N. (2015) Reliability of bench-mark datasets for crowd analytic surveillance. In: UNSPECIFIED.

Hassan, R. and Marimuthu, M. and Johl, S.K. (2015) Demographic diversity and firm value: A review on large companies using panel data approach. In: UNSPECIFIED.

Hassan, S. and Khosravi, A. and Jaafar, J. (2015) Training of interval type-2 fuzzy logic system using extreme learning machine for load forecasting. In: UNSPECIFIED.

Hooi, Yew Kwang and Hassan, M Fadzil and Shariff, Azmi M (2015) Ontology evaluationâ��A criteria selection framework. In: 2015 International Symposium on Mathematical Sciences and Computing Research (iSMSC).

Hung, N.T. and Ismail, I. and Saad, N.B. and Tufa, L. and Irfan, M. (2015) Design of optimal GBN sequences for identification of MIMO systems. In: UNSPECIFIED.

Hussein, A.A.E. and Shafiq, N. and Nuruddin, M.F. (2015) Compressive strength and interfacial transition zone of sugar cane bagasse ash concrete: A comparison to the established pozzolans. In: UNSPECIFIED.

Hyder, Rasha and Kamel, Nidal and Boon, Tang Tong and Reza, Faruque (2015) Mapping of language brain areas in patients with brain tumors. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Hyder, R. and Kamel, N. and Boon, T.T. and Reza, F. (2015) Mapping of language brain areas in patients with brain tumors. In: UNSPECIFIED.

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2015) Morphology, topography, and hardness of diffusion bonded sialon to AISI 420 at different bonding time. In: UNSPECIFIED.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2015) Single phase inverter with wide-input voltage range for solar photovoltaic application. In: UNSPECIFIED.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. and Umar, M.W. (2015) Matlab/Simulink model of solar PV array with perturb and observe MPPT for maximising PV array efficiency. In: UNSPECIFIED.

Irawan, S. and Bharadwaj, A.M. and Temesgen, B. and Karuppanan, S. and Abdullah, M.Z.B. (2015) Effect of wear on the burst strength of l-80 steel casing. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Tuan Hung, N. (2015) Diagnosis of distributed faults in outer race of bearings via Park's transformation method. In: UNSPECIFIED.

Irshad, K. and Habib, K. and Thirumalaiswamy, N. (2015) Performance evaluation of PV-Trombe wall for sustainable building development. In: UNSPECIFIED.

Irshad, M.I. and Ahmad, F. and Mohamed, N.M. and Abdullah, M.Z. and Yar, A. (2015) Microscopic and magnetic properties of template assisted electrodeposited iron nanowires. In: UNSPECIFIED.

Ismail, N. and Ismail, M.T. and Karim, S.A.A. and Hamzah, F.M. (2015) Modeling and forecasting the volatility of Islamic unit trust in Malaysia using GARCH model. In: UNSPECIFIED.

Jamali, A.A. and Nor, N.M. and Ibrahim, T. (2015) Energy storage systems and their sizing techniques in power system - A review. In: UNSPECIFIED.

Jamaludin, M.I. and Matori, A.N. and Myint, K.C. (2015) Application of NIR to determine effects of hydrocarbon microseepage in oil palm vegetation stress. In: UNSPECIFIED.

Jamaludin, N. and Monsi, M. and Hassan, N. and Zainuddin, N. and Rashid, N.I. (2015) The efficiency of convergence rate for IMSS2-5D procedure. In: UNSPECIFIED.

Jamil, I.E. and Al-Kayiem, H.H. (2015) Simulation analysis of the oil/water structure in the downhole with presence of hydrocyclone separator. In: UNSPECIFIED.

Janier, J.B. and Jalil, M.A.B.A. and Samin, M.I.B.M. and Karim, S.A.B.A. (2015) Quantification of asphaltene precipitation by scaling equation. In: UNSPECIFIED.

Javaid, M.U. and Ghazali, Z. and Binsha, A.S.N. and Langove, N. (2015) Psychosocial risks: Health and wellbeing of workers in petrochemical industry of Malaysia. In: UNSPECIFIED.

Jeoti, V. and Nawaz, F. (2015) Wireless RFID/sensor network using SAW (WiRSeNS): A feasibility study. In: UNSPECIFIED.

Jilani, M.T. and Wen, W.P. and Zakariya, M.A. and Cheong, L.Y. and Ur Rehman, M.Z. (2015) An improved design of microwave biosensor for measurement of tissues moisture. In: UNSPECIFIED.

Jusoh, Norwahyu and Yeong, Yin Fong and Lau, Kok Keong and Azmi, Mohd Shariff (2015) Membranes for gas separation current development and challenges. In: Applied Mechanics and Materials.

Karajeh, A.I. and Ibrahim, M.Y.B. and Lode, N.A.B. (2015) Impact of voluntary disclosure on earnings management in Malaysian companies: A proposed analysis. In: UNSPECIFIED.

Kareem, M.W. and Habib, K. and Ruslan, M.H. (2015) Numerical modelling of multi-pass solar dryer filled with granite pebbles for thermal storage enhancement. In: UNSPECIFIED.

Kareem, M.W. and Habib, K. and Sulaiman, S.A. (2015) Numerical and experimental investigation of direct solar crop dryer for farmers. In: UNSPECIFIED.

Karia, N. and Asaari, M.H.A.H. and Mohamad, N. and Kamaruddin, S. (2015) Assessing Halal logistics competence: An Islamic-based and resource-based view. In: UNSPECIFIED.

Karim, S.A.A. (2015) Positivity preserving by using rational cubic ball function. In: UNSPECIFIED.

Khalid, S. and Ali, S.Q. (2015) Design of highly selective ultra-wideband (UWB) bandpass filter using step impedance resonator and parallel coupled lines. In: UNSPECIFIED.

Khalil, Ibrahim and Aziz, A Rashid A and Yusuf, Suzana (2015) Effect of rubber seed oil and palm oil biodiesel diesel blends on diesel engine emission and combustion characteristics. In: Applied mechanics and materials.

Khan, M Irfan and Azizli, Khairun and Sufian, Suriati and Man, Zakaria and Siyal, Ahmer Ali and Ullah, Hafeez (2015) Determination of anisotropy and multimorphology in fly ash based geopolymers. In: AIP Conference Proceedings.

Khan, A.H. and Javaid, N. and Imran, M. and Khan, Z.A. and Qasim, U. and Haider, N. (2015) DYN-NbC: A new routing scheme to maximize lifetime and throughput of WSNs. In: UNSPECIFIED.

Khan, J. and Malik, A.S. and Kamel, N. and Dass, S.C. and Affandi, A.M. (2015) Segmentation of acne lesion using fuzzy C-means technique with intelligent selection of the desired cluster. In: UNSPECIFIED.

Khan, Javed and Malik, Aamir Saeed and Kamel , Nidal and Dass, Sarat Chandra and Affandi, Azura Mohd (2015) Segmentation of acne lesion using fuzzy C-means technique with intelligent selection of the desired cluster. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Khan, M.A. and Ibrahim, M.Y. (2015) Corporate governance mechanism constraining Earning Management in Malaysian listed companies. In: UNSPECIFIED.

Khan, M.I. and Azizli, K. and Sufian, S. and Man, Z. and Siyal, A.A. and Ullah, H. (2015) Determination of anisotropy and multimorphology in fly ash based geopolymers. In: UNSPECIFIED.

Khan, S.U. and Shafiq, N. and Ayub, T. (2015) Microstructure characteristics of concrete incorporating metakaolin and PVA fibers and influence on the compressive strength. In: UNSPECIFIED.

Khan, W.Z. and Saad, N.M. and Aalsalem, M.Y. and Xaing, Y. (2015) Detecting clones in wireless sensor networks using Single Stage Memory Random Walk with Network Division. In: UNSPECIFIED.

Khanh, D.V.K. and Vasant, P.M. and Elamvazuthi, I. and Dieu, V.N. (2015) Geometric optimization of thermo-electric coolers using simulated annealing. In: UNSPECIFIED.

Kian Seng, Lee (2015) Autonomous Patrol and Surveillance System using Unmanned Aerial Vehicles. In: 15th IEEE International Conference on Environment and Electrical Engineering.

Kim, D.K. and Liew, M.S. and Yu, S.Y. and Park, K.S. and Choi, H.S. (2015) Method for estimating soft clay type seabed embedment by pipeline movement. In: UNSPECIFIED.

Krishnan, V. and Uemura, Y. and Thanh, N.T. and Khalid, N.A. and Osman, N. and Mansor, N. (2015) Three types of Marine microalgae and Nannocholoropsis oculata cultivation for potential source of biomass production. In: UNSPECIFIED.

Kudiri, K.M. and Said, A.M. and Nayan, M.Y. (2015) Emotion Detection through Speech and Facial Expressions. In: UNSPECIFIED.

Kumar, S. and Awang, M. and Ahmed, S. and Dehraj, N.U.H. and Saleem, Y.S. (2015) Worm-like micelles as a mobility control agent for chemical enhanced oil recovery. In: UNSPECIFIED.

Kurian, V.J. and Al-Yacouby, A.M. and Sebastian, A.A. and Liew, M.S. and Idichandy, V.G. (2015) Effect of sacrificial anodes and marine growth on hydrodynamic coefficients of rigid cylinders. In: UNSPECIFIED.

Lai, Li Sze and Yeong, Yin Fong and Lau, Kok Keong and Azmi, Mohd Shariff (2015) Fast Synthesis of Highly Crystalline ZIF-8 Using Microwave-Assisted Solvothermal Method. In: Applied Mechanics and Materials.

Lai, Fong woon and Micheal, Drieberg and Sophea, Ieng and Ammar Redza Ahmad Rizal, Redza Ahmad Rizal (2015) An Examination of Consumer Preferences and Socio-economic Factors on the Demand for Electric Train System in Malaysia. In: The 25th International Business Information Management Association Conference,, 7-8 May 2015, Amsterdam, Netherlands.

Latip, A.S.A. and Matori, A. and Aobpaet, A. and Din, A.H.M. (2015) Monitoring of offshore platform deformation with stanford method of Persistent Scatterer (StaMPS). In: UNSPECIFIED.

Lee, K.S. and Ovinis, M. and Nagarajan, T. and Seulin, R. and Morel, O. (2015) Autonomous patrol and surveillance system using unmanned aerial vehicles. In: UNSPECIFIED.

Lock, SSM and Lau, KK and Tan, EK and Shariff, AM and Mei, Irene Lock Sow (2015) Application of microscopy technology in mathematical modeling of hollow fiber membrane system. In: AIP Conference Proceedings.

Lock, S.S.M. and Lau, K.K. and Tan, E.K. and Shariff, A.M. and Mei, I.L.S. (2015) Application of microscopy technology in mathematical modeling of hollow fiber membrane system. In: UNSPECIFIED.

Magzoub, M.A. and Saad, N.B. and Ibrahim, R.B. and Irfan, M. (2015) The effects of internal and external disturbances for the hybrid fuzzy-fuzzy controller applied to IM-drive. In: UNSPECIFIED.

Mahesh, K. and Al Nallagownden, P. and Al Elamvazuthi, I. (2015) Optimal placement and sizing of DG in distribution system using accelerated PSO for power loss minimization. In: UNSPECIFIED.

Mahgoub, B.K.M. and Sulaiman, S.A. and A Karim, Z.A. and Hagos, F.Y. (2015) Experimental study on the effect of varying syngas composition on the emissions of dual fuel CI engine operating at various engine speeds. In: UNSPECIFIED.

Makki, B.I. and Salleh, R. and Harun, H. (2015) Work readiness, career self-efficacy and career exploration: A correlation analysis. In: UNSPECIFIED.

Mannan, Hafiz Abdul and Mukhtar, Hilmi and Murugesan, Thanabalan (2015) Preparation and characterization of newly developed polysulfone/polyethersulfone blend membrane for CO2 separation. In: Applied Mechanics and Materials.

Mansor, M.F.C. and Cheng, E.M. and Malek, M.F.A. and Beh, H.G. and Chik, A. and Khor, S.F. and Rojan, M.A. and Nasir, N.F.M. and Ong, S.A. and Bakar, S.A. (2015) Study on 10 GHz electromagnetic wave absorption of cullet doped with iron (II, III) oxide. In: UNSPECIFIED.

Marimuthu, Maran and Hassan, Rohail and Johl, S.K (2015) Demographic Diversity and Firm Value: A Review on Large Companies Using Panel Data Approach. In: 2nd International Symposium on Technology Management and Emerging Technologies (ISTMET2015), 25-27 August 2015, Langkawi Island, Kedah.

Marimuthu, Maran and Hassan, Rohail and Johl, S.K. (2015) Ethnic Diversity on Boards and Market Performance. In: International Conference on Business, Management, Tourism and Hospitality 2015 (BIZMATOUR 2015), 12-14 May 2015, Melaka.

Marzuki, N.A. and Zarain, N. (2015) AEDESTROYER a proposed robotic solution to control dengue in Malaysia. In: UNSPECIFIED.

Mazlan, M.A.A.A. and Md Khir, M.H. and Mohamad Saad, M.N. (2015) Implementation of wireless sensor network in oil and gas specifically for personnel positioning application. In: UNSPECIFIED.

Mazlan, M.A.F. and Uemura, Y. and Osman, N.B. and Yusup, S. (2015) Characterizations of bio-char from fast pyrolysis of Meranti wood sawdust. In: UNSPECIFIED.

Md Yusof, M.A. and Fuad, I.I.M. and Matali, A.A.A.A. (2015) Improved hydrocarbon recovery of a lean retrograde gas reservoir under propane injection. In: UNSPECIFIED.

Mei, Irene Lock Sow and Lock, SSM and Abdullah, Bawadi (2015) Application of microscopy technology in thermo-catalytic methane decomposition to hydrogen. In: AIP Conference Proceedings.

Mei, I.L.S. and Lock, S.S.M. and Abdullah, B. (2015) Application of microscopy technology in thermo-catalytic methane decomposition to hydrogen. In: UNSPECIFIED.

Memon, A.H. and Bin Ibrahim, T. and Nallagowden, P. (2015) Design optimization of linear permanent magnet generator for wave energy conversion. In: UNSPECIFIED.

Meng, G.C. and Shahzad, A. and Saad, N.M. and Malik, A.S. and Meriaudeau, F. (2015) Prototype design for wearable veins localization system using near infrared imaging technique. In: UNSPECIFIED.

Meng, Goh Chuan and Shahzad, Aamir and Mohamad Saad, Mohamad Naufal and Malik, Aamir Saeed and Meriaudeau, Fabrice (2015) Prototype design for wearable veins localization system using near infrared imaging technique. In: 2015 IEEE 11th International Colloquium on Signal Processing & Its Applications (CSPA).

Mian, Muhammad Umer and Dennis, John Ojur and Khir, MH and Riaz, Kashif and Iqbal, Abid and Bazaz, Shafaat A and Tang, TB (2015) MEMS 3-DoF gyroscope design, modeling and simulation through equivalent circuit lumped parameter model. In: AIP Conference Proceedings.

Mian, M.U. and Dennis, J.O. and Md. Khir, M.H. and Riaz, K. and Iqbal, A. and Bazaz, S.A. and Tang, T.B. (2015) MEMS 3-DoF gyroscope design, modeling and simulation through equivalent circuit lumped parameter model. In: UNSPECIFIED.

Mitra, M. and Kargupta, K. and Ganguly, S. and Banerjee, D. (2015) Improved photoluminescence property of CTAB assisted polyaniline-AlZnO nanocomposite. In: UNSPECIFIED.

Mohamad, N. and Kamaruddin, S. and Purwanto, U.S. (2015) The effects of organizational innovation on operational performance and other types of innovation. In: UNSPECIFIED.

Mohamad Hashim, Ahmad Zulfadli and Sufian, SURIATI and Shima Shaharun, Maizatul (2015) Green functionalization of activated carbon for dye removal application. In: Applied Mechanics and Materials.

Mohammad Azam, Siti Fatimah and Drieberg , Micheal and Lai, Fong Woon (2015) Ant Colony Optimization of Feeder Bus Routes for Electric Train Service. In: IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE) 2015.

Mohammed, B.S. and Ahmed Nezri, A.N.S.B. (2015) Durability aspects and bond strength of rubbercrete containing nano silica. In: UNSPECIFIED.

Mohammed, B.S. and Ibrahim, R.B. (2015) Convertible active power filter: A new approach to compensate for current quality problems in the DS. In: UNSPECIFIED.

Mohd, M.S. and Karsiti, M.N. and Mohd, M.S. (2015) Effect of phase advance on the brushless dc motor torque speed respond. In: UNSPECIFIED.

Moniruzzaman, M and Mahmood, H and Kamiya, N and Yusup, S and Goto, M (2015) Activity and stability of enzyme immobilized with ionic liquid based polymer materials. In: J Eng Sci Technol (Special Issue on SOMCHE 2014 and RSCE 2014 Conference).

Mubashir, Muhammad and Yeong, Yin Fong and Keong, Lau Kok and bin Mohd Shariff, Azmi (2015) Methods comparison for the synthesis of deca-dodecasil 3 rhombohedral (DDR3) zeolite crystals. In: Applied mechanics and materials.

Mukhtar, Amir and Tang, Tong Boon (2015) Vision based motorcycle detection using HOG features. In: 2015 IEEE International Conference on Signal and Image Processing Applications (ICSIPA).

Mumtaz, A. and Mohamed, N.M. (2015) Nanoporous TiO 2 developed from two templates for their use in photovoltaic applications. In: UNSPECIFIED.

Mumtaz, M. and Tan, I.M. and Mushtaq, M. (2015) Synergistic effects of surfactants mixture for foam stability measurements for enhanced oil recovery applications. In: UNSPECIFIED.

Mumtaz, W. and Malik, A.S. and Ali, S.S.A. and Yasin, M.A.M. and Amin, H. (2015) Detrended fluctuation analysis for major depressive disorder. In: UNSPECIFIED.

Mumtaz, Wajid and Malik, Aamir Saeed and Azhar Ali, Syed Saad and Mohd Yasin, Mohd Azhar and Amin, Hafeez Ullah (2015) Detrended fluctuation analysis for major depressive disorder. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Munir, S. and Heikal, M.R. and Aziz, A.R.A. and Muthuvalu, M.S. and Siddiqui, M.I. (2015) Temporal and spatial characterization of turbulent structures in liquid phase using POD technique. In: UNSPECIFIED.

Musa, M.S. and Nallagownden, P. and Chiu, K.W. and Sarwar, M.B. (2015) Design and development of intelligent adaptive tunnel lighting system. In: UNSPECIFIED.

Nasir, Rizwan and Mukhtar, Hilmi and Shima Shaharun, Maizatul and Man, Zakaria (2015) Effect of carbon molecular sieve (CMS) concentration on mixed matrix membranes (MMMs) performance for carbon dioxide removal. In: Applied Mechanics and Materials.

Naz, Muhammad Yasin and Sulaiman, Shaharin Anwar and Ari-Wahjoedi, Bambang and Ku Shaari, Ku Zilati (2015) Effect of Temperature and Pressure on Spray Properties of Tapioca Starch Adhesives. In: Applied Mechanics and Materials.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2015) Sauter mean diameter statistics of the starch dispersion atomized with hydraulic nozzle. In: UNSPECIFIED.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2015) Spatio-temporal droplet size statistics in developing spray of starchy solution. In: UNSPECIFIED.

Nguyen, T.H. and Ismail, I. and Saad, N.B. and Faisal, A. and Irfan, M. (2015) A practical approach of control of real time nonlinear process plant using Multiple Model Predictive Control. In: UNSPECIFIED.

Nisar, K. and Hijazi, M.H.A. and Lawal, I.A. (2015) A new model of application response time for VoIP over WLAN and fixed WiMAX. In: UNSPECIFIED.

Nor, M.A.M. and Al-Kayiem, H.H. and Lemma, T.A. (2015) Numerical analysis of cocurrent conical and cylindrical axial cyclone separators. In: UNSPECIFIED.

Nor, N.I.M. and Romlie, M.F. and Kannan, R. (2015) Comparison of tubular and planar design of a micro linear generator for vibration energy harvesting. In: UNSPECIFIED.

Ofei, T.N. and Alhemyari, S.A. (2015) Computational fluid dynamics simulation of the effect of drill pipe rotation on cuttings transport in horizontal wellbores using a Newtonian fluid. In: UNSPECIFIED.

Ofei, T.N. and Irawan, S. and Pao, W. (2015) Cuttings-liquid frictional pressure loss model for horizontal narrow annular flow with rotating drillpipe. In: UNSPECIFIED.

Okere, H.C. and Sulaiman, S. and Rambli, D.R.A. and Foong, O.-M. (2015) An exploratory study on the user experience of foot reflexology therapy using reflexology artifacts. In: UNSPECIFIED.

Osei, H. and Al-Kayiem, H.H. and Hashim, F.M. (2015) Numerical studies on the separation performance of liquid-liquid hydrocyclone for higher water-cut wells. In: UNSPECIFIED.

Othman, M. and Yusnenti, F.M.Y. and Mohdyusri, I. (2015) Siliconizing process of mild steel substrate by using Tronoh Silica Sand (TSS): An experimental investigation. In: UNSPECIFIED.

Prajapati, S. and Ghosh, D. (2015) Analysis of shear-wave splitting using multicomponent seismic data. In: UNSPECIFIED.

Pransisco, P. and Shafie, A. and Guan, B.H. (2015) Nanostructure investigation of magnetic nanomaterial Ni 0.5 Zn 0.3 Cu 0.2 Fe 2 O 4 synthesized by sol-gel method. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Bin Muhammad Saad, M.N. (2015) Comparison of digital elevation models based on high resolution satellite stereo imagery. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Saad, M.N.B.M. and Iqbal, M. (2015) Segmentation of satellite imagery based on pulse-coupled neural network. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Saad, M.N.M. and Ahmad, R.F. and Abdullah, A.R.T. (2015) Identification of power poles based on satellite stereo images using graph-cut algorithm. In: UNSPECIFIED.

Qayyum, Abdul and Malik, Aamir Saeed and Mohamad Saad, Mohamad Naufal (2015) Comparison of Digital Elevation Models Based on High Resolution Satellite Stereo Imagery. In: 2015 International Conference on Space Science and Communication (IconSpace), Langkawi, Malaysia.

Qayyum, Abdul and Malik, Aamir Saeed and Mohamad Saad, Mohamad Naufal (2015) Segmentation of satellite imagery based on pulse-coupled neural network. In: 2015 International Conference on Space Science and Communication (IconSpace), Langkawi, Malaysia.

Qayyum, Abdul and Malik, Aamir Saeed and Mohamad Saad, Mohamad Naufal and Ahmad, Rana Fayyaz and Taun Abdullah, Taun Ab Rashid (2015) Identification of power poles based on satellite stereo images using graph-cut algorithm. In: 2015 IEEE 11th International Colloquium on Signal Processing & Its Applications (CSPA).

Qayyum, Abdul and Malik, Aamir Saeed and Mohamad Saad, Mohamad Naufal and Iqbal, Mahboob and Abdullah, Mohd Faris and Rasheed, Waqas and Tuan Abdullah, Tuan Ab Rashid and Ramli, A Q (2015) Vegetation height estimation near power transmission poles via satellite stereo images using 3D depth estimation algorithms. In: 36th International Symposium on Remote Sensing of Environment, Berlin, Germany.

Rabih, A. and Dennis, J. and Khir, H. and Abdalrahman, M. and Ahmed, A. (2015) Modelling and Simulation of Polysilicon Piezoresistors in CMOS-MEMS Resonator for Biomarker Detection in Exhaled Breath. In: UNSPECIFIED.

Rabih, A.A.S. and Khir, M.H.M. and Ahmed, A.Y. and Ahmed, M.G.A. and Dennis, J.O. (2015) Characterization of CMOS-MEMS device for acetone vapor detection in exhaled breath. In: UNSPECIFIED.

Rahim, M.H.B.A. and Zamin, N. (2015) AUTISTHERAPIBOT: Autonomous robotic autism therapists assistant for autistic children. In: UNSPECIFIED.

Rahman, H.U. and Ibrahim, M.Y. and Ahmad, A.C. (2015) The impact of soft regulations on boardroom diversity and shareholders' confidence in Malaysia. In: UNSPECIFIED.

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) Hybrid Swarm Intelligence-Based Optimization for Charging Plug-in Hybrid Electric Vehicle. In: 7th Asian Conference, ACIIDS 2015, Bali, Indonesia., March 23-25, 2015, Bali, Indonesia..

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) Swarm intelligence based State-of-Charge optimization for charging Plug-in Hybrid Electric Vehicles. In: 5th International Conference on Energy and Sustainability, 16 - 18 December, 2014, Putrajaya, Malaysia..

Rahman, Z.H.A. and Khir, M.H.Md. and Burhanudin, Z.A. (2015) CMOS-MEMS thermoelectric generator for low power medical devices. In: UNSPECIFIED.

Rao, TVVLN and Rani, AMA and Sufian, S and Mohamed, NM (2015) Analysis of CNT additives in porous layered thin film lubrication with electric double layer. In: AIP Conference Proceedings.

Rao, T.V.V.L.N. and Rani, A.M.A. and Sufian, S. and Mohamed, N.M. (2015) Analysis of CNT additives in porous layered thin film lubrication with electric double layer. In: UNSPECIFIED.

Rasheed, Waqas and Tang, Tong Boon and Hamid, Nor Hisham Bin (2015) Default mode functional connectivity estimation and visualization framework for MEG data. In: 2015 7th International IEEE/EMBS Conference on Neural Engineering (NER).

Rasheed, W. and Tang, T.B. and Bin Hamid, N.H. (2015) Default mode functional connectivity estimation and visualization framework for MEG data. In: UNSPECIFIED.

Rauf, M. and Yahya, N. and Nyamasvisva, T.E. and Ansari, A. and Shafie, A. and Nahar, N. (2015) Prediction of double stacking hydrocarbon using Marine Controlled Source Electromagnetic method. In: UNSPECIFIED.

Rehman, S. and Ali, S.S.A. (2015) Wind farm layout design using modified particle swarm optimization algorithm. In: UNSPECIFIED.

Ridha, S. and Yerikania, U. (2015) New nano-geopolymer cement system improves wellbore integrity upon acidizing job: Experimental findings. In: UNSPECIFIED.

Roslan, N.S. and Izhar, L.I. and Saad, M.N.M. and Sivapalan, S. (2015) Innovations for teaching and learning: An exploration of the potential of EEG for individual and group learning activities. In: UNSPECIFIED.

Rosli, N.S. and Ibrahim, R. and Ismail, I. (2015) Soft redundant instrument for metering station in gas transportation system. In: UNSPECIFIED.

Rostam, Omar and Dimin, Mohd Fairuz and Luqman, HH and Said, MR and Keong, Lau Kok and Norazlina, Mohamad Yatim and Norhidayah, M and Shaaban, Azizah and others (2015) Assessing the significance of rate and time pulse spraying in top spray granulation of urea fertilizer using Taguchi method. In: Applied Mechanics and Materials.

Rubab, S. and Hassan, M.F. and Mahmood, A.K. and Shah, S.N.M. (2015) Forecasting volunteer grid workload using Holt-Winters' method. In: UNSPECIFIED.

Sabir, O. and Ya, T.M.Y.S.T. (2015) Numerical simulation of fluid flow in three dimensional domain based on two stage pressure-velocity correction method. In: UNSPECIFIED.

Saboorian-Jooybari, H. and Abeyat, E. (2015) Derivation of new analytical expressions for calculation of gas-liquid relative permeabilities through fractures-Part I: Incompressible flow. In: UNSPECIFIED.

Sahmer, A.Z. and Mohamed, N.M. and Zaine, S.N.A. (2015) Effectiveness of dye sensitised solar cell under low light condition using wide band dye. In: UNSPECIFIED.

Sai, P.H.V.S.T. and Sharma, K.V. and Devarayapalli, K.C. and Rao, J.V.R. (2015) GO-TiO2 Nano Composites for Silicon PV Cell Application. In: UNSPECIFIED.

Saini, S. and Rambli, D.R.B.A. and Sulaiman, S.B. and Zakaria, M.N.B. and Tomi, A.B. (2015) Particle swarm optimization based articulated human pose tracking using enhanced silhouette extraction. In: UNSPECIFIED.

Samsudin, Sity Juaeiriah and Mansor, Nurlidia and Sufian, Suriati and Man, Zakaria (2015) Thiosulfinates concentration in garlic extract at different storage temperatures. In: Applied Mechanics and Materials.

Sari, E. and Duh, H. and Brereton, M. and Taylor, J.L. and Awori, K. and Wan Bt Ahmad, W.F. (2015) Experience design in the Asia Pacific ICT landscape. In: UNSPECIFIED.

Sarwar, M.B. and Nallagownden, P. and Baharudin, Z. and Muthuvalu, M.S. (2015) Simulation and development of ZigBee based wireless stakeout system controlled by PC. In: UNSPECIFIED.

Satti, I.A. and Yusoff, W.I.W. (2015) A new method for overpressure mechanisms analysis. In: UNSPECIFIED.

See, Tan Lian and Horng, Tay Wee and Lau, Kok Keong and Azmi, Mohd Shariff (2015) Modelling of High Pressure, High Concentration Carbon Dioxide Capture in Absorption Column. In: Applied Mechanics and Materials.

Serai, M.H. and Johl, S.K. and Marimuthu, M. (2015) Conceptual framework of sustainable corporate entrepreneurship. In: UNSPECIFIED.

Shabib-Asl, A. and Ayoub, M.A. and Elraies, K.A. (2015) Laboratory investigation into wettability alteration by different low salinity water compositions in sandstone rock. In: UNSPECIFIED.

Shad, Muhammad Kashif and Lai, Fong Woon (2015) Developing an Enterprise Risk Management Value Enhancing Model Manifested through Economic Value Added. In: APPLIED COMPUTER and APPLIED COMPUTATIONAL SCIENCE (ACACOS '15), Malaysia.

Shafiq, N. and Fadhilnuruddin, M. and Elshekh, A.E.A. and Fathi, A. (2015) Correlation between compressive strength and ultrasonic pulse velocity of high strength concrete incorporating chopped basalt fibre. In: UNSPECIFIED.

Shaheen, A.-U.-R. and Hussin, F.A. and Hamid, N.H. (2015) Delay design-for-testability for functional RTL circuits. In: UNSPECIFIED.

Shaheen, Ateeq-Ur-Rehman and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2015) Delay Design-for-Testability for Functional RTL Circuits. In: 7th International conference on Information Technology and Electrical Engineering (ICITEE 2015), 29-30th October 2015, Chiang Mai, Thailand.

Shahid, Muhammad Zubair and Suleman, Humbul and Maulud, Adulhalim Shah and Khalil, Mohammad Azmi Bustam and Man, Zakaria (2015) Monitoring of Chemical Speciation of DEA--CO2--Water System by Raman Spectroscopy. In: Advanced Materials Research.

Shahzad, A. and Goh, C.M. and Saad, N.M. and Walter, N. and Malik, A.S. and Meriaudeau, F. (2015) Subcutaneous veins detection and backprojection method using Frangi vesselness filter. In: UNSPECIFIED.

Shahzad, A. and Tyng, C.M. and Saad, N.M. and Walter, N. and Malik, A.S. and Meriaudeau, F. (2015) Subcutaneous veins depth estimation method using Monte Carlo simulations. In: UNSPECIFIED.

Shahzad, Aamir and Tyng, Chai Meei and Mohamad Saad, Mohamad Naufal and Nicolas, Walter and Malik, Aamir Saeed and Meriaudeau, Fabrice (2015) Subcutaneous veins depth estimation method using Monte Carlo simulations. In: 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Pisa.

Shahzad, Aamir and goh, CM and Mohamad Saad, Mohamad Naufal and Nicolas, Walter and Malik, Aamir Saeed and Meriaudeau, Fabrice (2015) Subcutaneous veins detection and backprojection method using Frangi vesselness filter. In: 2015 IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE).

Shamim, A. and Ghazali, Z. and Abdul Jamak, A.B.S. (2015) Extrinsic experiential value as an antecedent of customer citizenship behavior. In: UNSPECIFIED.

Shamsuddin, N.M. and Yusup, S. and Ibrahim, W.A. and Bokhari, A. and Chuah, L.F. (2015) Oil extraction from Calophyllum inophyllum L. via Soxhlet extraction: Optimization using response surface methodology (RSM). In: UNSPECIFIED.

Sheikh, M.A. and Ali, N.B.Z. and Hamid, N.H. and Hussin, F.A. and Shukla, V. (2015) On enhancing the reliability of digital microfluidic biochips (DMFB) through electrode cells health classification. In: UNSPECIFIED.

Sheikh, Madiha and Zain Ali, Noohul Basheer and Hamid, Nor Hisham and Hussin, Fawnizu Azmadi and Shukla, Vineeta (2015) On Enhancing The Reliability of Digital Microfluidic Biochips (DMFB) Through Electrode Cells Health Classification. In: 2015 Asian Symposium on Quality Electronic Design (ASQED), 4-5 Augist 2015, Kuala Lumpur, Malaysia.

Shirazi, I. and Ahmad, F. and Raza, M.R. and Muhsan, A.S. and Aslam, M. (2015) Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding. In: UNSPECIFIED.

Shoaib, M. and Hisham, N. and Basheer, N. and Tariq, M. (2015) Frequency analysis of electrostatic cantilever-based MEMS sensor. In: UNSPECIFIED.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. (2015) Effect of process temperature on morphology of CNTs grown in a vertically fluidized bed reactor with Fe 2 O 3 /Al 2 O 3 catalyst. In: UNSPECIFIED.

Singh, KSM Jagindar and Elamvazuthi, I and Shaari, KZK and Lima, Fernando V (2015) PID tuning control strategy using Cuckoo Search algorithm. In: 2015 IEEE Student Conference on Research and Development (SCOReD).

Singh, K.S.M.J. and Elamvazuthi, I. and Shaari, K.Z.K. and Lima, F.V. (2015) PID tuning control strategy using Cuckoo Search algorithm. In: UNSPECIFIED.

Singh, M.M. and Chieng, L.B. and Hassan, R. and Zaaba, Z.F. (2015) Friends personalization of trustworthiness for privacy perseverance in social networking. In: UNSPECIFIED.

Siyal, A.A. and Azizli, K.A. and Ismail, L. and Man, Z. and Khan, M.I. (2015) Quantification of geopolymers production by chemical methods- A short review. In: UNSPECIFIED.

Soh, B.P. and Pao, W. and Al-Kayiem, H.H. (2015) Numerical analyses for improved hydrodynamics of deep water torpedo anchor. In: UNSPECIFIED.

Sohail, A. and Dominic, P.D.D. (2015) Business process improvement: A process warehouse based resource management method. In: UNSPECIFIED.

Soon, J.N.P. and Wan, W.S. and Yuen, P.K. and Heng, L.E. and Theam, L.J. and Wei, L.S. (2015) BareBone cloud IaaS: Revitalization disruptive technology. In: UNSPECIFIED.

Sovuthy, C. and Wen, W.P. (2015) Compact, quasi-elliptic dual-band bandpass filter with improved isolation. In: UNSPECIFIED.

Subhani, A.R. and Malik, A.S. and Kamel, N. and Saad, N. and Nandagopal, D.N. (2015) Experimental evidence for the effects of the Demand-Control model on the cognitive arousal: An EEG based study. In: UNSPECIFIED.

Subhani, Ahmad Rauf and Malik, Aamir Saeed and Kamel, Nidal and Mohamad Saad, Mohamad Naufal and Nandagopal, D (Nanda) (2015) Experimental evidence for the effects of the Demand-Control model on the cognitive arousal: An EEG based study. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Sugumaran, M. (2015) Study on effect of low calcium fly ash on geopolymer cement for oil well cementing. In: UNSPECIFIED.

Sugumaran, M. and Suppiah, R.R. (2015) Study on the effect of silica fume with low calcium geopolymer properties for oil well cementing. In: UNSPECIFIED.

Sulaiman, S.A. and Mat, M.N.H. and Guangul, F.M. and Bou-Rabee, M.A. (2015) Real-time study on the effect of dust accumulation on performance of solar PV panels in Malaysia. In: UNSPECIFIED.

Sulaimon, A.A. and Govindasamy, K. (2015) New correlation for predicting asphaltene deposition. In: UNSPECIFIED.

Suleman, Humbul and Shahid, Muhammad Zubair and Maulud, Abdulhalim Shah and Man, Zakaria and Khalil, Mohammad Azmi Bustam (2015) Determination of chemical species in MDEA--Carbon Dioxide--Water system by raman spectroscopy. In: Advanced Materials Research.

Suman, Shipra and Hussin, Fawnizu Azmadi and Nicolas, Walter and Malik, Aamir Saeed and Goh, Khean Lee and Hilmi, Ida and Ho, Shaiw Hooi (2015) Optimum Colour Space Selection for Ulcerated Regions using Statistical Analysis and Classification of Ulcerated Frames from WCE Video Footage. In: 22nd International Conference on Neural Information Processing (ICONIP2015), November 9-12, 2015, Istanbul, Turkey.

Sumra, I.A. and Hasbullah, H.B. and Manan, J.-L.A. (2015) Using TPM to ensure security, trust and privacy (STP) in VANET. In: UNSPECIFIED.

Sutri, N.Y. and Dennis, J.O. and Khir, M.H.M. and Ahmed, A.Y. and Mian, M.U. (2015) A monolithic, low-noise, capacitive readout interface circuit for CMOS-MEMS resonator-based gravimetric chemical gas sensors. In: UNSPECIFIED.

Sutri, N.Y. and Dennis, J.O. and Khir, M.H.Md. and Mian, M.U. (2015) Noise minimization techniques for modulator demodulator circuits used for chopper stabilization in CMOS-MEMS sensor applications. In: UNSPECIFIED.

Syafaat, T.A. and Ismail, M.C. (2015) Microbiologically influenced corrosion (MIC) of storage tank bottom plates. In: UNSPECIFIED.

Syaifuddin Mohd, M. and Rashid, A. and Syafiq Mohd, M. (2015) Investigation of mechanical field weakening of axial flux permanent magnet motor. In: UNSPECIFIED.

Taha Jilani, M. and Wong, P.W. and Zakariya, M.A. and Lee, Y.C. (2015) Dielectric characterization of meat using enhanced coupled ring-resonator. In: UNSPECIFIED.

Talpur, S. and Khahro, S.F. and Soomro, A.M. and Saand, A.S. (2015) Improving router efficiency in network on chip triplet-based hierarchical interconnection network with shared buffer design. In: UNSPECIFIED.

Tang, Tong Boon and Noor, Nur Haedzerlin Md (2015) Towards wearable active humidifier for dry eyes. In: 2015 IEEE International Circuits and Systems Symposium (ICSyS).

Tasfy, S.F.H. and Zabidi, N.A.M. and Shaharun, M.S. and Subbarao, D. (2015) The role of support morphology on the performance of Cu/ZnO-catalyst for hydrogenation of CO 2 to methanol. In: UNSPECIFIED.

Teh, H.M. and Venugopal, V. (2015) Optimization of hydraulic efficiency of a free surface semicircular breakwater using wave screens. In: UNSPECIFIED.

Teo, W. and Hing, K.L.M. (2015) An experimental investigation into the shear interaction between internal stirrups and external CFRP systems of RC beams. In: UNSPECIFIED.

Trinh, TH and KuShaari, K (2015) Modeling base to design controlled release fertilizer matching with nitrogen uptake of rice plant. In: Computing and Systems Technology Division 2015-Core Programming Area at the 2015 AIChE Annual Meeting.

Trinh, T.H. and KuShaari, K. (2015) Modeling base to design controlled release fertilizer matching with nitrogen uptake of rice plant. In: UNSPECIFIED.

Triwiyanto, A. and Hussain, P. and Priadi, D. and Ismail, M.C. (2015) Surface characteristics of low temperature hybrid thermochemical treatment of AISI 316L. In: UNSPECIFIED.

Ullah, Sami and Azmi, Mohd Shariff and Nadeem, Muhammad and Bustam, Mohammad Azmi and Shahid, Shaukat Ali and Murshid, Ghulam and Naz, Muhammad Yasin and Sagir, Muhammad and Mushtaq, Muhammad (2015) Synergistic Effect of Thiourea and Surfactants on Corrosion Inhibition of Stainless Steel-410 in Presence of Sulfuric Acid. In: Applied Mechanics and Materials.

Ullah, B. and Ovinis, M. and Baharom, M.B. and Javaid, M.Y. and Izhar, S.S. (2015) Underwater gliders control strategies: A review. In: UNSPECIFIED.

Ullah, R. and Jaafar, J. and Said, A.B.M. (2015) Semantic Annotation Model for objects Classification. In: UNSPECIFIED.

Wahid, N. and Yusof, M.A.M. and Hanafi, N.H. (2015) Optimum nanosilica concentration in synthetic based mud (SBM) for high temperature high pressure well. In: UNSPECIFIED.

Woldemichael, D.E. and Abdul Rani, A.M. and Lemma, T.A. and Altaf, K. (2015) Numerical simulation of rock cutting using 2D AUTODYN. In: UNSPECIFIED.

Woldemichael, D.E. and Hashim, F.M. (2015) Web-based conceptual design support system. In: UNSPECIFIED.

Xiang, W.Y. and Sebastian, P. (2015) Handwriting recognition using webcam for data entry. In: UNSPECIFIED.

Yahya, E.A. and Zabidi, N.A.M. (2015) Effect of promoters on the morphology of Ni-based catalyst. In: UNSPECIFIED.

Yew, K.H. and Hassan, M.F. and Zainal Abidin, A.I.B. and Arshad, N.I.B. and Shariff, A.M. (2015) A generic ontology methodology and factors to address design consistency. In: UNSPECIFIED.

Yin, Y.C. and Kait, C.F. and Fatimah, H. and Wilfred, C. (2015) Electron microscopy of Mg/TiO 2 photocatalyst morphology for deep desulfurization of diesel. In: UNSPECIFIED.

Yusof, M.A.M. and Hanafi, N.H. (2015) Vital roles of nano silica in synthetic based mud for high temperature drilling operation. In: UNSPECIFIED.

Zahari, A. and Jaafar, J. (2015) A novel approach of hidden markov model for time series forecasting. In: UNSPECIFIED.

Zainuddin, N. and Ibrahim, Z.B. and Othman, K.I. and Suleiman, M. and Jamaludin, N. (2015) Numerical solution of second order ODE directly by two point block backward differentiation formula. In: UNSPECIFIED.

Zaman, N. and Low, T.J. and Alghamdi, T. (2015) Enhancing routing energy efficiency of Wireless Sensor Networks. In: UNSPECIFIED.

Zarif, S. and Faye, I. and Rambli, D.R.A. (2015) Video completion method for static object removal based on GLCM. In: UNSPECIFIED.

Zazilah, M. and Mansor, A.F. and Yahaya, N.Z. (2015) Hep-2 cell images fluorescence intensity classification to determine positivity based on neural network. In: UNSPECIFIED.

Zia-ul-Mustafa, M. and Ahmad, F. and Megat-Yusoff, P.S.M. and Aziz, H. (2015) Synergistic effects of mica and wollastonite fillers on thermal performance of intumescent fire retardant coating. In: UNSPECIFIED.

Ziao, C.Z. and Kamaruddin, S. (2015) Numerical assessment on makespan minimization by adopting NEH heuristics in permutation flow shop. In: UNSPECIFIED.

Zulkifli, S.A. and Mohd, S. and Jamali, A.J. and Kurniawan, Y. and Saad, N. and Aziz, A.R.A. (2015) Implementation of energy management system for a split-parallel hybrid electric vehicle with in-wheel motors. In: UNSPECIFIED.

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2015) Operation, power flow, system architecture and control challenges of split-parallel through-the-road hybrid electric vehicle. In: UNSPECIFIED.

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2015) Split-parallel through-the-road hybrid electric vehicle: Operation, power flow and control modes. In: UNSPECIFIED.

Zulkifli, S.A. and Syaifuddin Mohd, M. and Maharun, M. and Bakar, N.S.A. and Idris, S. and Samsudin, S.H. and Firmansyah, F. and Adz, J.J. and Misbahulmunir, M. and Abidin, E.Z.Z. and Syafiq Mohd, M. and Saad, N. and Aziz, A.R.A. (2015) Design and development of split-parallel through-the road retrofit hybrid electric vehicle with in-wheel motors. In: UNSPECIFIED.

van Thien Duc, Nguyen and Sufian, Suriati and Mansor, Nurlidia and Yahya, Noorhana (2015) Effect of concentration and time factors on carbon nanofiber supported iron catalyst preparation by incipient wetness. In: Applied Mechanics and Materials.

Book

Abbas, T. and Nazir, S. and Mrugalska, B. and Mutalib, M.I.A. (2015) Mercury emissions, hazards and preventive measures: A review. CRC Press, pp. 411-415.

Abdul Khalil, H.P. and Bhat, A.H. and Abu Bakar, A. and Tahir, P.M. and Zaidul, I.S. and Jawaid, M. (2015) Cellulosic nanocomposites from natural fibers for medical applications: A review. Springer Berlin Heidelberg, pp. 475-511.

Abdul Khalil, H.P. and Davoudpour, Y. and Bhat, A.H. and Rosamah, E. and Tahir, P.M. (2015) Electrospun cellulose composite nanofibers. Springer Berlin Heidelberg, pp. 191-228.

Al-Kayiem, Hussain H. and Brebbia, C.A. and Zuber, S.S. (2015) Energy and Sustainability V. WITPress, UK. ISBN 978-1-84564-837-4

Ansari, S. and Poncela, J. and Mohanlal, R. and Ansari, A. and Mohanlal, K. (2015) Importance of big data. IGI Global, pp. 1-19.

Chan, Y.H. and Yusup, S. and Quitai, A.T. and Tan, R.R. and Uemura, Y. and Sasaki, M. and Lam, H.L. (2015) Studies on effect of process parameters variation on bio-oil yield in subcritical and supercritical hydrothermal liquefaction of malaysian oil palm biomass. Springer International Publishing, pp. 225-245.

Chowdhury, S. and Yasir, M. and Uemura, Y. and Mohamed, N.M. and Uddin, A. and Yanagida, T. (2015) Application of micro-or small-scale biomass-derived fuel system for power generation. Springer International Publishing, pp. 339-367.

Fui Chin, B.L. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2015) Optimization study of catalytic co-gasification of rubber seed shell and high density polyethylene waste for hydrogen production using response surface methodology. Springer International Publishing, pp. 209-223.

Jaafar, J. and Danyaro, K.U. and Liew, M.S. (2015) Web intelligence: A fuzzy knowledge-based framework for the enhancement of querying and accessing web data. IGI Global, pp. 83-104.

Khanh, D.V.K. and Vasant, P.M. and Elamvazuthi, I. and Dieu, V.N. (2015) Collaborative simulated annealing genetic algorithm for geometric optimization of thermo-electric coolers. Springer India, pp. 155-183.

Khanh, D.V.K. and Vasant, P.M. and Elamvazuthi, I. and Dieu, V.N. (2015) Multi-objective optimization of two-stage thermo-electric cooler using differential evolution: MO optimization of TEC using DE. IGI Global, pp. 139-169.

Khoa, T.H. and Vasant, P.M. and Singh, B.S.M. and Dieu, V.N. (2015) Swarm-based mean-variance mapping optimization (MVMOS) for solving non-convex economic dispatch problems. IGI Global, pp. 211-251.

Kutty, S.R.M. and Aminu, N. and Hasnain Isa, M. (2015) Compact bioreactor treatment system for malaysian municipal sewage. Nova Science Publishers, Inc., pp. 283-307.

Lam, M.K. and Lee, K.T. (2015) Bioethanol Production from Microalgae. Elsevier Inc., pp. 197-208.

M Zain, A (2015) A Token of Love for Your Body's Health and Beauty. Paltridge Publishing. ISBN 978-1-4828-5264-6

Mohamed, M. and Yusup, S. and Wahyudiono and Machmudah, S. and Goto, M. and Uemura, Y. (2015) Upgrading of oil palm empty fruit bunch to value-added products. Springer International Publishing, pp. 63-78.

Rahman, I. and Vasant, P. and Singh, B.S.M. and Abdullah-Al-Wadud, M. (2015) Swarm intelligence-based optimization for PHEV charging stations. IGI Global, pp. 374-405.

Shaari, Ku Zilati Ku and Awang, Mokhtar (2015) Engineering Applications of Computational Fluid Dynamics. Springer.

Taiwo, A.A. and Downe, A.G. and Loke, S.-P. (2015) Behavioral intention towards e-government in Malaysia: A structural equation modeling approach. IGI Global, pp. 1951-1964.

Vasant, P. (2015) Hybrid evolutionary optimization algorithms: A case study in manufacturing industry. IGI Global, pp. 1072-1107.

Yusup, S. and Yiin, C.L. and Tan, C.J. and Abdullah, B. (2015) Determination of Optimum Condition for the Production of Rice Husk-Derived Bio-oil by Slow Pyrolysis Process. Wiley Blackwell, pp. 329-340.

Zaman, N. and Seliaman, M.E. and Hassan, M.F. and MÃ¡rquez, F.P.G. (2015) Handbook of research on trends and future directions in big data and web intelligence. IGI Global, pp. 1-500.

Citation Index Journal

Jan, Amin and Marimuthu, Maran (2015) Sustainability Profile of Islamic Banking Industry: Evidence from World Top Five Islamic Banking Countries. [Citation Index Journal]

Amir, Norlaili and W. Othman, W. M. S. and Faiz , Ahmad (2015) Fire Resistance Properties of Ceramic Wool Fiber Reinforced Intumescent Coatings. [Citation Index Journal]

Basrawi, Firdaus and Ibrahim, Thamir and Lee, Gui and Habib, Khairul (2015) Effect of Solar Fraction on the Economic and Environmental Performance of Solar Air-Conditioning by Adsorption Chiller in a Tropical Region. [Citation Index Journal]

Habib, Khairul and ASSADI, M.KH (2015) Study of Solar Driven Silica gel-Water based Adsorption Chiller. [Citation Index Journal]

Hassan, Rohail and Marimuthu, Maran (2015) Corporate Governance Effect on Ownership and Control in Firms An Empirical Evidence from Pakistan. [Citation Index Journal]

Hassan, Rohail and Marimuthu, Maran and Satirenjit , Kaur Johl (2015) Demographic Diversity and Firm Value: A Review on Large Companies Using Panel Data Approach. [Citation Index Journal]

Hassan, Rohail and Marimuthu, Maran and Satirenjit , Kaur Johl (2015) Diversity, Corporate Governance and Implication on Firm Financial Performance. [Citation Index Journal]

Hassan, Rohail and Marimuthu, Maran and Satirenjit , Kaur Johl (2015) Ethnic Diversity on Boards and Market Performance: An Empirical Investigation in Malaysia. [Citation Index Journal]

Hassan, Rohail and Marimuthu, Maran (2015) Corporate Governance Effect on Ownership and Control in Firms: An Empirical Evidence from Pakistan. [Citation Index Journal]

Ismail, Atef and Lee, Yen Cheong and Mahmoud, Z M M (2015) Puzzle of the folding potential on the nuclear halo reactions. [Citation Index Journal]

Ismail, Atef and Lee, Yen Cheong and Tammam, M (2015) Elastic scattering analysis of p+40Ca at incident energies from threshold to 48.4 MeV and nuclear matter radius. [Citation Index Journal]

Jan, Amin and Marimuthu, Maran (2015) Bankruptcy Profile of Foreign vs. Domestic Islamic Banks of Malaysia: A Post Crisis period Analysis. [Citation Index Journal] (Unpublished)

Jan, Amin and Marimuthu, Maran (2015) Altman Model and Bankruptcy Profile of Islamic Banking Industry A Comparative Analysis on Financial Performance. [Citation Index Journal]

Jan, Amin and Marimuthu, Maran (2015) Bankruptcy and Sustainability A Conceptual Review on Islamic Banking Industry. [Citation Index Journal]

Jan, Amin and Marimuthu, Maran (2015) Sustainability Profile of Islamic Banking Industry: Evidence from World Top Five Islamic Banking Countries. [Citation Index Journal]

Jan, Amin and Marimuthu, Maran (2015) Altman Model and Bankruptcy Profile of Islamic Banking Industry: A Comparative Analysis on Financial Performance. [Citation Index Journal]

Jan, Amin and Marimuthu, Maran (2015) Bankruptcy and Sustainability: A Conceptual Review on Islamic Banking Industry. [Citation Index Journal]

Kareem, M. W. and Habib, Khairul and Ruslan, M. H. (2015) Numerical modelling of multi-pass solar dryer filled with granite pebbles for thermal storage enhancement. [Citation Index Journal]

Lai, Fong Woon (2015) Empirical Examination of Enterprise Risk Management’s Value Creation Mechanism. [Citation Index Journal]

Lai, Fong-Woon (2015) Empirical Examination of Enterprise Risk Management’s Value Creation Mechanism. [Citation Index Journal]

Marimuthu, Maran and Nizamani, Fahmida (2015) Small and Medium Enterprises: Asymmetric Information and Critical Factors Affecting Bank Financing. [Citation Index Journal]

Marneni, Narahari and Pendyala, Rajashekhar (2015) Natural Convective Coutte Flow in a Vertical Parallel Plate Microchannel. [Citation Index Journal]

Mazlan, Mohammad Amir Firdaus (2015) Fast pyrolysis of hardwood residues using a fixed bed drop-type pyrolyzer. [Citation Index Journal]

Mod Zaid, Hayyiratul Fatimah and Chong, Fai Kait and Abdul Mutalib, Mohamed Ibrahim (2015) Photooxidative-Extractive Deep Desulfurization of Diesel using Cu-Fe/TiO2 and Eutectic Ionic Liquid. [Citation Index Journal]

Pendyala, Rajashekhar and Chong, Jia Ling and Ilyas, Suhaib Umer (2015) CFD Analysis of Heat Transfer Performance in a Car Radiator with Nanofluids as Coolants. [Citation Index Journal]

Pendyala, Rajashekhar and Wong, Yean Sang and Ilyas, Suhaib Umer (2015) CFD Simulations of Natural Convection Heat Transfer in Enclosures with Varying Aspect Ratios. [Citation Index Journal]

Pendyala, Rajashekhar and Yong, Jenn and Azman, Irsyad Ahnaf and Ilyas, Suhaib Umer (2015) CFD Simulations of Transient Fuel Gases Mixing, Leakage and Flammability in Air. [Citation Index Journal]

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) On the performance of accelerated particle swarm optimization for charging plug-in hybrid electric vehicles. [Citation Index Journal]

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) Swarm Intelligence-Based Smart Energy Allocation Strategy for Charging Stations of Plug-In Hybrid Electric Vehicles. [Citation Index Journal]

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) Technical Challenges of Plug-in Hybrid Electric Vehicles Deployment in Smart Electric Grid. [Citation Index Journal]

Serai, Majid Hussain and Satirenjit , Kaur Johl and Marimuthu, Maran (2015) Conceptual Framework of Sustainable Corporate Entrepreneurship. [Citation Index Journal]

Shad, Muhammad Kashif and Lai, Fong Woon (2015) A Conceptual Framework for Enterprise Risk Management performance measure through Economic Value Added. [Citation Index Journal]

Shakir, Mohamed and Qidwai, Uvais and Malik, Aamir Saeed and Kamel, Nidal (2015) EEG Simulation Hardware for Realistic Seizure, Preseizure and Normal Mode Signal Generation. [Citation Index Journal]

Yahya, Norashikin and Kamel , Nidal and Malik, Aamir Saeed (2015) Subspace-based technique for speckle noise reduction in ultrasound images. [Citation Index Journal]

Non-Citation Index Journal

Hakro, Muhammad Rehan and Harahap, Indra Sati Hamonangan (2015) Tyoe of Slope Failure Identified from Pore Pressure and Moisture Content Measurements. [Non-Citation Index Journal]

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) Prospect of Swarm Intelligence (SI) Techniques for the Charging Optimization of Electric Vehicles. [Non-Citation Index Journal]

Shad, Muhammad Kashif and Lai, Fong Woon (2015) A Conceptual Framework for Enterprise Risk Management Performance Measure through Economic Value Added. [Non-Citation Index Journal]

Vo Nguyen, Phu Huan and Harahap, Indra Sati Hamonangan (2015) Simulation of Tsunami Wave Generated by Submarine Slide: Generation, Propagation, Run-Up and Impact. [Non-Citation Index Journal]

This list was generated on Sun Nov 24 16:49:49 2024 +08.