Logo

Items where Year is 2015

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: | , | . | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z
Number of items: 576.

Habib, K and K Assadi, M and Zainudin, M H B (2015) Study of Solar Driven Silica gel-Water based Adsorption Chiller. Materials Science and Engineering: A, 88 . ISSN 0921-5093

Hassan, Rohail and Marimuthu, Maran and Kaur Johl, Satirenjit (2015) Diversity, Corporate Governance and Implication on Firm Financial Performance. Diversity, Corporate Governance and Implication on Firm Financial Performance, 7 (2). pp. 28-35. ISSN 1947-5667

Jan, Amin and Marimuthu, Maran (2015) Sustainability Profile of Islamic Banking Industry: Evidence from World Top Five Islamic Banking Countries. [Citation Index Journal]

,

, Muhammad Aswin, Bashar S Mohammed, Mohammad Shahir Liew, Zubair (2015) Shear Failure of RC Dapped-End Beams. Shear Failure of RC Dapped-End Beams . (Submitted)

.

., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, M Rafi Raza (2015) THERMAL CONDUCTIVITY OF POWDER INJECTION MOLDED CARBON NANOTUBE-REINFORCED COPPER-MATRIX COMPOSITES. THERMAL CONDUCTIVITY OF POWDER INJECTION MOLDED CARBON NANOTUBE-REINFORCED COPPER-MATRIX COMPOSITES .

., Edwar Yazid, Mohd Shahir Liew, Setyamartana Parman, Velluruzhati (2015) Identification of slow drift motions of a truss spar platform using parametric Volterra model. Identification of slow drift motions of a truss spar platform using parametric Volterra model .

., Edwar Yazid, Mohd Shahir Liew, Setyamartana Parman, Velluruzhati (2015) Improving the modeling capacity of Volterra model using evolutionary computing methods based on Kalman Smoother adaptive filter. Edwar Yazid, Mohd Shahir Liew, Setyamartana Parman, Velluruzhatil John Kurian . (Submitted)

., Irfan Shirazi, Faiz Ahmad, M Rafi Raza, Ali S Muhsan, M Aslam (2015) Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding. Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding . (Submitted)

., Liyana Rosely, Abdul Halim Abdul Latiff (2015) Fracture Network Correlation Analysis of Meta-Sediment Outcrop in Terengganu Coastline and Malay Basin. Fracture Network Correlation Analysis of Meta-Sediment Outcrop in Terengganu Coastline and Malay Basin .

., Mehboob Khatani, Norani Muti Mohamed, Nor Hisham Hamid, Ali Same (2015) Effect of photoanode thickness on electrochemical performance of dye sensitized solar cell. Effect of photoanode thickness on electrochemical performance of dye sensitized solar cell . (Submitted)

., Muhammad Rafi Raza, Faiz Ahmad, Norhamidi Muhamad, Abu Bakar Sul (2015) Effects of residual carbon on microstructure and surface roughness of PIM 316L stainless steel. Effects of residual carbon on microstructure and surface roughness of PIM 316L stainless steel .

., NH Mardi, MA Malek, MS Liew, HE Lee (2015) A Conceptual Review of Tsunami Models Based on Sumatera-Andaman Tsunami Event. A Conceptual Review of Tsunami Models Based on Sumatera-Andaman Tsunami Event . (Submitted)

., NH Mardi, MS Liew, MA Malek, MN Abdullah (2015) Tsunami Forecasting Due to Seismic Activity in Manila Trench of Malaysia Offshore Oil Blocks. Tsunami Forecasting Due to Seismic Activity in Manila Trench of Malaysia Offshore Oil Blocks . (Submitted)

., VJ Kurian, AM Al-Yacouby, AA Sebastian, MS Liew, VG Idichandy (2015) Effect of Sacrificial Anodes and Marine Growth on Hydrodynamic Coefficients of Rigid Cylinders. Effect of Sacrificial Anodes and Marine Growth on Hydrodynamic Coefficients of Rigid Cylinders . (Submitted)

A

A H Abdul Latiff, D P Ghosh, S N F Jamaludin, . (2015) Structural Enhancement in Shallow Gas Cloud Region Structural Enhancement in Shallow Gas Cloud Region. Structural Enhancement in Shallow Gas Cloud Region Structural Enhancement in Shallow Gas Cloud Region .

Abbas, M.A. and Wan Ahmad, W.F. and Kalid, K.S. (2015) A semantic web based framework for preschool cognitive skills tutoring system. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17758-17765.

Abbas, T. and Nazir, S. and Mrugalska, B. and Mutalib, M. (2015) Mercury emissions, hazards and preventive measures: A review. [["eprint_typename_conference\_item" not defined]]

Abbas, T. and Nazir, S. and Mrugalska, B. and Mutalib, M.I.A. (2015) Mercury emissions, hazards and preventive measures: A review. CRC Press, pp. 411-415.

Abbasi, A.Z. and Jamak, A.B.S.A. (2015) A conceptual model: Video-game engagement and its moderating impact on consumers� personality. Advanced Science Letters, 21 (5). pp. 1216-1220.

Abbasi, A.Z. and Ting, D.H. and Jamek, A.B.S.A. (2015) An integrated conceptual model for predicting behavioral learning triggered by video-game engagement: A mediating role of observational learning. [["eprint_typename_conference\_item" not defined]]

Abbasi, I. and Ali, S.S.A. and Ovinis, M. and Naeem, W. (2015) Adaptive identification of underwater glider using U-model for depth & pitch control under hydrodynamic disturbances. Jurnal Teknologi, 74 (9). pp. 113-118.

Abbasi, I. and Ali, S.S.A. and Ovinis, M. and Naeem, W. (2015) Adaptive identification of underwater glider using U-model for depth & pitch control under hydrodynamic disturbances. Jurnal Teknologi, 74 (9). pp. 113-118.

Abbasi, U.F. and Awang, A. and Hamid, N.H. (2015) A Cross-Layer Opportunistic MAC/routing Protocol to improve reliability in WBAN. [["eprint_typename_conference\_item" not defined]]

Abdalla, M.O. and Nagarajan, T. (2015) A computational study of the actuation speed of the hydraulic cylinder under different ports� sizes and configurations. Journal of Engineering Science and Technology, 10 (2). pp. 160-173.

Abdel-Aty, A.-H. and Zakaria, N. and Cheong, L.Y. and Metwally, N. (2015) Entanglement and teleportation via partial entangled-state quantum network. Journal of Computational and Theoretical Nanoscience, 12 (9). pp. 2213-2220.

Abdul Hadi, M.H. and Shairi, N.A. and Ahmad, B.H. and Wong, P.W. (2015) Isolation improvement of discrete PIN diode switch using square dumbbell Defected Ground Structure. [["eprint_typename_conference\_item" not defined]]

Abdul Halim, H.N. and Shariff, A.M. and Tan, L.S. and Bustam, M.A. (2015) Mass transfer performance of CO2 absorption from natural gas using monoethanolamine (MEA) in high pressure operations. Industrial and Engineering Chemistry Research, 54 (5). pp. 1675-1680.

Abdul Jamak, A.B.S. and Shamim, A. and Ghazali, Z. (2015) Impact of customer citizenship behavior on corporate brand experience. [["eprint_typename_conference\_item" not defined]]

Abdul Khalil, H.P. and Bhat, A.H. and Abu Bakar, A. and Tahir, P.M. and Zaidul, I.S. and Jawaid, M. (2015) Cellulosic nanocomposites from natural fibers for medical applications: A review. Springer Berlin Heidelberg, pp. 475-511.

Abdul Khalil, H.P. and Davoudpour, Y. and Bhat, A.H. and Rosamah, E. and Tahir, P.M. (2015) Electrospun cellulose composite nanofibers. Springer Berlin Heidelberg, pp. 191-228.

Abdul Majid, N.D. and Mohd Shariff, A. and Rusli, R. (2015) Process Safety Management (PSM) for managing contractors in process plant. Journal of Loss Prevention in the Process Industries, 37 . pp. 82-90.

Abdul Rahim, R.H. and Rahmiati, T. and Azizli, K.A. and Man, Z. and Nuruddin, M.F. and Ismail, L. (2015) Comparison of using NaOH and KOH activated fly ash-based geopolymer on the mechanical properties. Materials Science Forum, 803 . pp. 179-184.

Abdul-Kadir, N.A. and Mat Safri, N. and Othman, M.A. and Embong, A.M. (2015) Human heart oscillatory behavior during atrial fibrillation based on second order system. [["eprint_typename_conference\_item" not defined]]

Abdul-Wahhab, H.A. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2015) Modeling of diesel/CNG mixing in a pre-injection chamber. [["eprint_typename_conference\_item" not defined]]

Abdullah, M.A. and Afzaal, M. and Ismail, Z. and Ahmad, A. and Nazir, M.S. and Bhat, A.H. (2015) Comparative study on structural modification of Ceiba pentandra for oil sorption and palm oil mill effluent treatment. Desalination and Water Treatment, 54 (11). pp. 3044-3053.

Abid, S.A. and Othman, M. and Shah, N. and Sabir, O. and Khan, A.U.R. and Ali, M. and Shafi, J. and Ullah, S. (2015) Merging of DHT-based logical networks in MANETs. Transactions on Emerging Telecommunications Technologies, 26 (12). pp. 1347-1367.

Adam, I.K. and Aziz, A.R.A. and Yusup, S. (2015) Determination of diesel engine performance fueled biodiesel (Rubber seed/palm oil mixture) diesel blend. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2675-2685.

Adeyemi, B.J. and Sulaimon, A.A. (2015) Investigating the kinetics of water-in-crude oil emulsion stability. ARPN Journal of Engineering and Applied Sciences, 10 (16). pp. 7131-7136.

Adeyemi, B.J. and Sulaimon, A.A. (2015) Investigating the kinetics of water-in-crude oil emulsion stability. ARPN Journal of Engineering and Applied Sciences, 10 (16). pp. 7131-7136.

Afrooz, I.E. and �chsner, A. (2015) Effect of the carbon nanotube distribution on the thermal conductivity of composite materials. Journal of Heat Transfer, 137 (3).

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2015) Aerobic and anaerobic co-cultivation of Nannochloropsis oculata with oil palm empty fruit bunch for enhanced biomethane production and palm oil mill effluent treatment. Desalination and Water Treatment, 56 (8). pp. 2055-2065.

Ahmad, A.H. and Mahmood, A.K. and Jaafar, J. (2015) The architecture of fuzzy agent in rescuer monitoring system. American Journal of Engineering and Applied Sciences, 8 (3). pp. 345-353.

Ahmad, Junaid and Malik, Aamir Saeed and Abdullah, Mohd Faris and Kamel, Nidal S. and Xia, Likun (2015) A novel method for vegetation encroachment monitoring of transmission lines using a single 2D camera. Pattern Analysis and Applications .

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) Modelling educational games through multi-domain framework in light of game play. [["eprint_typename_conference\_item" not defined]]

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) An interpretive approach to model educational games: Learning theories domain using multi-domain framework. [["eprint_typename_conference\_item" not defined]]

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2015) A multi-domain framework: A qualitative study evolving understanding of subject-matter in modelling educational games. [["eprint_typename_conference\_item" not defined]]

Ahmad, N.N.R. and Mukhtar, H. and Man, Z. and Mohshim, D.F. (2015) Synthesis and characterization of EDA-functionalized polyethersulfone/SAPO-34 mixed matrix membrane. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6192-6195.

Ahmad, N.N.R. and Mukhtar, H. and Man, Z. and Mohshim, D.F. (2015) Synthesis and characterization of EDA-functionalized polyethersulfone/SAPO-34 mixed matrix membrane. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6192-6195.

Ahmad, N.N.R. and Mukhtar, H. and Man, Z. and Mohshim, D.F. (2015) Synthesis and characterization of EDA-functionalized polyethersulfone/SAPO-34 mixed matrix membrane. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6192-6195.

Ahmad, R.F. and Malik, A.S. and Kamel, N. and Reza, F. (2015) Object categories specific brain activity classification with simultaneous EEG-fMRI. [["eprint_typename_conference\_item" not defined]]

Ahmad, R.F. and Malik, A.S. and Kamel, N. and Reza, F. and Abdul Karim, A.H. (2015) Optimization and development of concurrent EEG-fMRI data acquisition setup for understanding neural mechanisms of brain. [["eprint_typename_conference\_item" not defined]]

Ahmad, Rana Fayyaz and Malik, Aamir Saeed and Kamel , Nidal and Reza, Faruque (2015) Object categories specific brain activity classification with simultaneous EEG-fMRI. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Ahmad, Rana Fayyaz and Malik, Aamir Saeed and Kamel , Nidal and Reza, Faruque and Abdul Karim, Ahmad Helmy (2015) Optimization and development of concurrent EEG-fMRI data acquisition setup for understanding neural mechanisms of brain. In: 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Pisa.

Ahmad, Rana Fayyaz and Malik, Aamir Saeed and Qayyum, Abdul and Kamel, Nidal (2015) Disaster monitoring in urban and remote areas using satellite stereo images: A depth estimation approach. In: 2015 IEEE 11th International Colloquium on Signal Processing & Its Applications (CSPA).

Ahmed, M.O. and Yenduri, A. and Kurian, V.J. (2015) Investigation on the dynamic responses of a truss spar platform for different mooring line groups. Journal of Marine Science and Application, 14 (2). pp. 189-195.

Ahmed, S. and Kaur Johl, S. and Bin Abdul Jamak, A.B.S. and Mohamed Noor, A.B. (2015) Mind the purchasers� disturbance: Exploring planned purchasers� influences. Advanced Science Letters, 21 (5). pp. 1381-1384.

Ahmed, S. and Ting, D.H. and Johl, S.K. and Abdul Jamak, A.B.S.B. (2015) Game changing strategies for retailers: How to create utilitarian offers for shoppers. [["eprint_typename_conference\_item" not defined]]

Ahmed Mohamed Ahmed Salim, Osama Akhtar Janjua, Ali Wahid, Aruba, . (2015) Linear Regression Approach for Porosity and Permeability Calculations from Well Logs: A Case Study in NW Bonaparte Basin, Australia. Linear Regression Approach for Porosity and Permeability Calculations from Well Logs: A Case Study in NW Bonaparte Basin, Australia .

Ahsanullah, and Sulaiman, S. and Mahmood, A.K. and Khan, M. (2015) Investigation of fingertip contact area and shape for precise target selection on multi-touch screen. [["eprint_typename_conference\_item" not defined]]

Ahsanullah, and Sulaiman, S. and Mahmood, A.K.B. and Khan, M. (2015) Understanding factors influencing User Experience of interactive systems: A literature review. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 18175-18185.

Ahsanullah, and Sulaiman, S. and Mahmood, A.K.B. and Khan, M. and Madni, M. (2015) Applications of multi-touch tabletop displays and their challenging issues: An overview. International Journal on Smart Sensing and Intelligent Systems, 8 (2). pp. 966-991.

Akhtar, S. and Kurnia, J.C. and Shamim, T. (2015) A three-dimensional computational model of H2-air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application. Applied Energy, 152 . pp. 47-57.

Al Jameli, Marwan and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2015) An Energy Efficient Cross-Layer Network Operation Model For IEEE 802.15.4-Based Mobile Wireless Sensor Networks. IEEE Sensors Journal, 15 (2). pp. 684-692. ISSN 1530-437X

Al Riza, D.F. and Gilani, S.I.U.H. and Aris, M.S. (2015) Standalone photovoltaic systems sizing optimization using design space approach: Case study for residential lighting load. Journal of Engineering Science and Technology, 10 (7). pp. 943-957.

Al-Arabiat, D. and Wan Ahmad, W.F. and Sarlan, A. (2015) Review on critical factors of adopting cloud mobile learning. [["eprint_typename_conference\_item" not defined]]

Al-Dujaili, Abdullah and Lo, Hai Hiung and Tan, Shawn (2015) ASH1: a Stack-Based Input/ Output Processor for USB Operations. In: IEEE International Conference on Circuit And Systems, 2nd Sep, 2015 to 4th Sep 2015, Langkawi.

Al-Jemeli, M. and Hussin, F.A. (2015) An energy efficient cross-layer network operation model for IEEE 802.15.4-based mobile wireless sensor networks. IEEE Sensors Journal, 15 (2). pp. 684-692.

Al-Kayiem, A.H.H. and Ibrahim, M.A. (2015) The influence of the equivalent hydraulic diameter on the pressure drop prediction of annular test section. [["eprint_typename_conference\_item" not defined]]

Al-Kayiem, H.H. and Heng, Y.M. (2015) Experimental investigation of rooftop solar chimney for natural ventilation. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10249-10254.

Al-Kayiem, Hussain H. and Brebbia, C.A. and Zuber, S.S. (2015) Energy and Sustainability V. WITPress, UK. ISBN 978-1-84564-837-4

Al-Kayiem, Hussain H. and Yassen, Tadahmun A. (2015) ON THE NATURAL CONVECTION HEAT TRANSFER IN A RECTANGULAR PASSAGE SOLAR AIR HEATER. solar energy, 112 . pp. 310-318.

Al-Qutami, T.A.H. and Ibrahim, R. (2015) Design of a Fuzzy Logic process Controller for flow applications and implementation in series tanks Pilot Plant. [["eprint_typename_conference\_item" not defined]]

Al-Qutami, T.A.H. and Ibrahim, R. (2015) Design of a Fuzzy Logic process Controller for flow applications and implementation in series tanks Pilot Plant. [["eprint_typename_conference\_item" not defined]]

Al-Waked, R. and Nasif, M.S. and Morrison, G. and Behnia, M. (2015) CFD simulation of air to air enthalpy heat exchanger: Variable membrane moisture resistance. Applied Thermal Engineering, 84 . pp. 301-309.

Al-Wakeel, H.B. and Karim, Z.A.A. and Al-Kayiem, H.H. (2015) Optimizing electro-thermo Helds for soot oxidation using microwave heating and metal. [["eprint_typename_conference\_item" not defined]]

Alaloul, W.S. and Liew, M.S. and Wan Abdullah Zawawi, N.A. (2015) The characteristics of coordination process in construction projects. [["eprint_typename_conference\_item" not defined]]

Alhussian, Hitham and Zakaria, Nordin and Hussin, Fawnizu Azmadi (2015) Minimizing Scheduling Overhead In LRE-TL Real-Time Multiprocessor Scheduling Algorithm. Turkish Journal of Electrical Engineering & Computer Sciences . pp. 1-15. ISSN 1303-6203

Ali, A. and Farooq, M.U. and Naz, M.Y. and Qayyum, A. and Khan, Y. and Ghaffar, A. and Shukrullah, S. (2015) Symmetric tungsten triple probe diagnostic for time resolved measurements in plasma discharge. International Journal of Applied Electromagnetics and Mechanics, 49 (2). pp. 289-298.

Ali, E.M. and Yahaya, N.Z. and Perumal, N. and Zakariya, M.A. (2015) Design and development of harvester RECTENNA at GSM band for battery charging applications. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10206-10212.

Ali, I. and Khir, M.H.M. and Baharudin, Z. and Ashraf, K. (2015) CMOS-MEMS multiple resonant vibration energy harvester for wireless sensor network. [["eprint_typename_conference\_item" not defined]]

Ali, J.S.M. and Kannan, R. and Romlie, M.F. (2015) New cascaded multilevel converter topology based on basic unit with reduction of DC sources. [["eprint_typename_conference\_item" not defined]]

Ali, J.S.M. and Kannan, R. and Romlie, M.F. (2015) New cascaded multilevel converter topology based on basic unit with reduction of DC sources. [["eprint_typename_conference\_item" not defined]]

Ali, S.M. and Zakariya, M.A. and Baharudin, Z. and Adz, J.J. and Jilani, M.T. and Ain, M.F. and Ahmad, Z.A. (2015) Parametric study of Cylindrical Dielectric Resonator Antenna (CDRA) feeder with symmetric parabolic reflector. Research Journal of Applied Sciences, Engineering and Technology, 10 (6). pp. 607-617.

Ali, W. and Abdullah, A. (2015) The long-run relationship between economic growth, financial development, trade openness and CO2 emissions in Malaysia. [["eprint_typename_conference\_item" not defined]]

Alkali, A.U. and Ginta, T.L. and Abdul-Rani, A.M. (2015) Experimental investigation and 3D finite element prediction of temperature distribution during travelling heat sourced from oxyacetylene flame. [["eprint_typename_conference\_item" not defined]]

Almahasneh, H. and Kamel, N. and Walter, N. and Malik, A.S. (2015) R-principal subspace for driver cognitive state classification. [["eprint_typename_conference\_item" not defined]]

Almahasneh, Hossam and Kamel , Nidal and Nicolas, Walter and Malik, Aamir Saeed (2015) r-Principal Subspace for Driver Cognitive State Classification. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Altaf, K. and Rani, A.M.B.A. (2015) Numerical study of profiled conformal cooling channels for cooling time reduction in injection mould tools. International Journal of Engineering Systems Modelling and Simulation, 7 (4). pp. 230-237.

Ameen, Mohamed Abul Hassan and Malik, Aamir Saeed and Nicolas, Walter and Faye , Ibrahima and Nordin, Nadira (2015) Reliability of bench-mark datasets for crowd analytic surveillance. In: 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC).

Amin, A. and Rehman, M. and Basri, S. and Hassan, M.F. (2015) A proposed conceptual framework of programmer's creativity. [["eprint_typename_conference\_item" not defined]]

Amin, H.U. and Malik, A.S. and Ahmad, R.F. and Badruddin, N. and Kamel, N. and Hussain, M. and Chooi, W.-T. (2015) Feature extraction and classification for EEG signals using wavelet transform and machine learning techniques. Australasian Physical and Engineering Sciences in Medicine, 38 (1). pp. 139-149.

Amin, H.U. and Malik, A.S. and Badruddin, N. and Kamel, N. and Hussain, M. (2015) Effects of stereoscopic 3D display technology on event-related potentials (ERPs). [["eprint_typename_conference\_item" not defined]]

Amin, H.U. and Malik, A.S. and Mumtaz, W. and Badruddin, N. and Kamel, N. (2015) Evaluation of passive polarized stereoscopic 3D display for visual & mental fatigues. [["eprint_typename_conference\_item" not defined]]

Amin, Hafeez Ullah and Malik, Aamir Saeed and Ahmad, Rana Fayyaz and Badruddin , Nasreen and Kamel, Nidal S. and Hussain, Muhammad and Chooi, Weng-Tink (2015) Feature extraction and classification for EEG signals using wavelet transform and machine learning techniques. Australasian Physical and Engineering Sciences in Medicine . ISSN 1879-5447

Amin, Hafeez Ullah and Malik, Aamir Saeed and Badruddin , Nasreen and Kamel , Nidal and Hussain, Mohammad (2015) Effects of stereoscopic 3D display technology on event-related potentials (ERPs). In: 2015 7th International IEEE/EMBS Conference on Neural Engineering (NER).

Amin, Hafeez Ullah and Malik, Aamir Saeed and Kamel, Nidal S. and Chooi, Weng-Tink and Hussain, Mohammad (2015) P300 correlates with learning & memory abilities and fluid intelligence. JOURNAL OF NEUROENGINEERING AND REHABILITATION .

Amin, Hafeez Ullah and Malik, Aamir Saeed and Mumtaz, Wajid and Badruddin , Nasreen and Kamel , Nidal (2015) Evaluation of passive polarized stereoscopic 3D display for visual & mental fatigues. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Amir, Norlaili and W. Othman, W. M. S. and Faiz , Ahmad (2015) Fire Resistance Properties of Ceramic Wool Fiber Reinforced Intumescent Coatings. [Citation Index Journal]

Anggraeni, Silvia and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2015) Review of Single Cycle Shifter for Structured LDPC Encoder. Applied Mechanics and Materials, 763 . ISSN 1660-9336

Ani, Z.C. and Sarlan, A. (2015) Validating reusability of software projects using object-oriented design metrics. Lecture Notes in Electrical Engineering, 339 . pp. 845-850.

Aniza, N. and Hassan, S. and Nor, M.F.M. and Kee, K.E. and Aklilu, T. (2015) Investigation of thermal degradation of poultry processing dewatered sludge using thermogravimetric analysis method. Jurnal Teknologi, 76 (5). pp. 7-10.

Aniza, N. and Hassan, S. and Nor, M.F.M. and Kee, K.E. and Aklilu, T. (2015) Investigation of thermal degradation of poultry processing dewatered sludge using thermogravimetric analysis method. Jurnal Teknologi, 76 (5). pp. 7-10.

Ansari, S. and Gonzalez, J.P. and Otero, P. and Ansari, A. (2015) Analysis of MAC Strategies for Underwater Applications. Wireless Personal Communications, 85 (2). pp. 359-376.

Armi, N. and Yusoff, M.Z. and Saad, N.M. (2015) Decentralized multiuser cooperative spectrum sensing in cognitive radio system. International Journal on Electrical Engineering and Informatics, 7 (3). pp. 418-428.

Asif, A. and Man, Z. and Mohd Azizli, K.A. and Nuruddin, M.F. and Ismail, L. (2015) The effect of Si/Al ratio and sodium silicate on the mechanical properties of fly ash based geopolymer for coating. Materials Science Forum, 803 . pp. 355-361.

Askury Abd Kadir, Mohd Razlan Abdul Rahman, Choong Chee Meng, Fa, . (2015) Characterization and modelling of naturally fractured granites in the Redang Island, Terengganu, Malaysia. Characterization and modelling of naturally fractured granites in the Redang Island, Terengganu, Malaysia .

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Prediction of RC beams failure load using non-linear finite element analysis. International Journal of Applied Engineering Research, 10 (22). pp. 42974-42980.

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Root cause of reinforced concrete dapped-end beams failure. International Journal of Applied Engineering Research, 10 (22). pp. 42927-42933.

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Shear Failure of RC Dapped-End Beams. Advances in Materials Science and Engineering, 2015 .

Awais, M. and Badruddin, N. and Drieberg, M. (2015) A non-invasive approach to detect drowsiness in a monotonous driving environment. [["eprint_typename_conference\_item" not defined]]

Awais, M. and Walter, N. and Faye, I. and Saad, M.N. and Ramanathan, A. and Zain, R.M. (2015) Analysis of auto-fluorescence images for automatic detection of abnormalities in oral cavity. [["eprint_typename_conference\_item" not defined]]

Awais, M. and Walter, N. and Faye, I. and Saad, M.N. and Ramanathan, A. and Zain, R.M. (2015) Analysis of auto-fluorescence images for automatic detection of abnormalities in oral cavity. [["eprint_typename_conference\_item" not defined]]

Awang, A. and Agarwal, S. (2015) Data Aggregation Using Dynamic Selection of Aggregation Points Based on RSSI for Wireless Sensor Networks. Wireless Personal Communications, 80 (2). pp. 611-633.

Awang, M. and Raza, S.K. and Yahaya, M.S.A. (2015) Microstructure and hardness investigation of different welding passes in weld zones. Materialwissenschaft und Werkstofftechnik, 46 (4-5). pp. 492-497.

Ayman N Qadrouh*, Jose’M Carcione, Ahmed Salim, Zuhar Harith, . (2015) Best Fitting of NMO Equations and Depth Conversion. Best Fitting of NMO Equations and Depth Conversion .

Ayman Qadrouh, José M Carcione, Ahmed M Salim, Zuhar Zahir Tuan , . (2015) Attenuation effects on the seismic response of a bottom-simulating reflector. Attenuation effects on the seismic response of a bottom-simulating reflector .

Ayman Qadrouh, José M Carcione, Ahmed M Salim, Zuhar Zahir Tuan , . (2015) Journal of Natural Gas Science and Engineering. Journal of Natural Gas Science and Engineering .

Ayoub, M.A. and Shabib-Asl, A. and AbdellahiZein, A.M. and Elraies, K.A. and MohdSaaid, I.B. (2015) Recovery optimization of an oil reservoir by water flooding under different scenarios; a simulation approach. Research Journal of Applied Sciences, Engineering and Technology, 10 (4). pp. 357-372.

Azahar, T.F. and Mahinderjit-Singh, M. and Hassan, R. (2015) RFID-enabled supply chain detection using clustering algorithms. [["eprint_typename_conference\_item" not defined]]

Azam, S.F.M. and Drieberg, M. and Lai, F.-W. (2015) Ant Colony Optimization of feeder bus routes for electric train service. [["eprint_typename_conference\_item" not defined]]

Azarpour, A. and Nejad Ghaffar Borhani, T. and Wan Alwi, S.R. and Abdul Manan, Z. and Madooli Behbehani, M. (2015) Prediction of Pd/C Catalyst Deactivation Rate and Assessment of Optimal Operating Conditions of Industrial Hydropurification Process. Industrial and Engineering Chemistry Research, 54 (28). pp. 7067-7082.

B

Baharudin, Z. and Rehman, M.U.Z. and Zakariya, M.A. and Khir, M.H.M. and Khan, M.T. and Adz, J.J. (2015) Bowtie shaped substrate integrated waveguide bandpass filter. Lecture Notes in Electrical Engineering, 315 . pp. 365-373.

Baheta, A.T. and Emad, M.A. (2015) Parametric analysis of carbon dioxide transcritical and supercritical power cycles using low grade heat source. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10169-10173.

Baheta, A.T. and Hassan, S. and Reduan, A.R.B. and Woldeyohannes, A.D. (2015) Performance investigation of transcritical carbon dioxide refrigeration cycle. [["eprint_typename_conference\_item" not defined]]

Baheta, Aklilu Tesfamichael (2015) Parametric analysis of carbon dioxide transcritical and supercritical power cycles using low grade heat source. ARPN Journal of Engineering and Applied Sciences, 10 (21). ISSN 1819-6608

Bahloul, M.R. and Yusoff, M.Z. and Saad, M.N.M. (2015) Efficient and low complexity modulation classification algorithm for MIMO systems. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 58-64.

Baig, M.Z. and Javed, E. and Ayaz, Y. and Afzal, W. and Gillani, S.O. and Naveed, M. and Jamil, M. (2015) Classification of left/right hand movement from EEG signal by intelligent algorithms. [["eprint_typename_conference\_item" not defined]]

Bajeh, A.O. and Basri, S. and Jung, L.T. (2015) An empirical validation of coupling and cohesion metrics as testability indicators. Lecture Notes in Electrical Engineering, 339 . pp. 915-922.

Bakhsh, S.T. and Aman Sheikh, M. and Alghamdi, R. (2015) Self-Schedule and Self-Distributive MAC Scheduling Algorithms for Next-Generation Sensor Networks. International Journal of Distributed Sensor Networks, 2015 .

Bamatraf, S. and Hussain, M. and Aboalsamh, H. and Mathkour, H. and Malik, A.S. and Amin, H.U. and Muhammad, G. and Qazi, E.-U.-H. (2015) A system based on 3D and 2D educational contents for true and false memory prediction using EEG signals. [["eprint_typename_conference\_item" not defined]]

Bamatraf, Saeed and Hussain, Mohammad and Aboalsamh, Hatim and Mathkour, Hassan and Malik, Aamir Saeed and Amin, Hafeez Ullah and Muhammad, Ghulam and Qazi, Emad-Ul-Haq (2015) A system based on 3D and 2D educational contents for true and false memory prediction using EEG signals. In: 2015 7th International IEEE/EMBS Conference on Neural Engineering (NER).

Bamatraf, Saeed and Hussain, Muhammad and Aboalsamh, Hatim and Qazi, Emad-Ul-Haq and Malik, Aamir Saeed and Amin, Hafeez Ullah and Mathkour, Hassan and Muhammad, Ghulam and Muhammad, Hafiz Imran (2015) A System for True and False Memory Prediction based on 2D and 3D Educational Contents and EEG Brain Signals. Computational Intelligence and Neuroscience . (In Press)

Bano, S. and Ting, D.H. (2015) Digital era generation: Zhai Nan and Zhai Nv blessing or curse. [["eprint_typename_conference\_item" not defined]]

Basrawi, Firdaus and Ibrahim, Thamir and Lee, Gui and Habib, Khairul (2015) Effect of Solar Fraction on the Economic and Environmental Performance of Solar Air-Conditioning by Adsorption Chiller in a Tropical Region. [Citation Index Journal]

Bayuaji, R. and Biyanto, T.R. and Irawan, S. (2015) Design of cement plant waste heat recovery generation. [["eprint_typename_conference\_item" not defined]]

Bayuaji, R. and Nuruddin, M.F. and Francis, S. and Ekaputri, J.J. and Triwulan, and Junaedi, S. and Fansuri, H. (2015) Mechanical properties of MIRHA-fly ash geopolymer concrete. Materials Science Forum, 803 . pp. 49-57.

Besrour, S. and Rahim, L.B.A. and Dominic, P.D.D. (2015) Exploratory study to assess and evaluate requirement specification techniques using analysis determination requirements framework. Research Journal of Applied Sciences, Engineering and Technology, 9 (3). pp. 165-171.

Bhattacharjee, S. and Rahim, L.B.A. and Aziz, I.B.A. (2015) Enhancement of confidentiality and integrity during big data transmission using a hybrid technique. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 18029-18038.

Bhayo, B.A. and Al-Kayiem, H.H. and Yahaya, N.Z. (2015) Performance investigation of the S-rotors. [["eprint_typename_conference\_item" not defined]]

Borhani, T.N.G. and Azarpour, A. and Akbari, V. and Wan Alwi, S.R. and Manan, Z.A. (2015) CO2 capture with potassium carbonate solutions: A state-of-the-art review. International Journal of Greenhouse Gas Control, 41 . pp. 142-162.

Bou-Rabee, M.A. and Sulaiman, S.A. and Choe, G. and Han, D. and Saeed, T. and Marafie, S. (2015) Characteristics of solar energy radiation on typical summer and winter days in Kuwait. International Journal of Automotive and Mechanical Engineering, 12 (1). pp. 2944-2953.

Brahim-Belhaouari, S. and Hassan, M. and Walter, N. and Bermak, A. (2015) Advanced statistical metrics for gas identification system with quantification feedback. IEEE Sensors Journal, 15 (3). pp. 1705-1715.

C

Candra, H. and Yuwono, M. and Chai, R. and Handojoseno, A. and Elamvazuthi, I. and Nguyen, H.T. and Su, S. (2015) Investigation of window size in classification of EEG-emotion signal with wavelet entropy and support vector machine. [["eprint_typename_conference\_item" not defined]]

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. and Abdullah, W.A.K.W. (2015) Effects of cooling regime on the formation of voids in statically cooled waxy crude oil. International Journal of Multiphase Flow, 77 . pp. 187-195.

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. and Kamil Wan Abdullah, W.A. (2015) Study on influence of flow rates on voids in waxy crude oil subjected to dynamic and static cooling. Journal of Mechanical Engineering and Sciences, 9 . pp. 1587-1594.

Chan, Y.H. and Yusup, S. and Quitai, A.T. and Tan, R.R. and Uemura, Y. and Sasaki, M. and Lam, H.L. (2015) Studies on effect of process parameters variation on bio-oil yield in subcritical and supercritical hydrothermal liquefaction of malaysian oil palm biomass. Springer International Publishing, pp. 225-245.

Che Mansor, M.F. and Cheng, E.M. and Zakaria, Z. and Abdul Malek, M.F. and Chik, A. and Rojan, M.A. and Zahid, L. and Abu Bakar, S. and Mohd Nasir, N.F. and Khor, S.F. and Beh, H.G. (2015) Microwave absorption analysis on recycled glass doped with Ferum (II, III) Oxide (Fe2O3). International Journal of Mechanical and Mechatronics Engineering, 15 (5). pp. 1-13.

Cheab, S. and Wong, P.W. (2015) Design and synthesis of quasi dual-mode, elliptic coaxial filter. Radioengineering, 24 (3). pp. 795-799.

Cheab, S. and Wong, P.W. (2015) Design and synthesis of quasi dual-mode, elliptic coaxial filter. Radioengineering, 24 (3). pp. 795-799.

Cheab, S. and Wong, P.W. and Chew, X.Y. (2015) Parallel Connected Dual-Mode Filter. IEEE Microwave and Wireless Components Letters, 25 (9). pp. 582-584.

Chin, S.C. and Shafiq, N. and Nuruddin, M.F. (2015) FRP as strengthening material for Reinforced Concrete beams with openings � A review. KSCE Journal of Civil Engineering, 19 (1). pp. 213-219.

Choong Chee Meng, Askury Abd Kadir, Siti Nur Fathiyah Jamaludin, . (2015) KLEDANG FAULT: A STRIKE-SLIP FAULT? KLEDANG FAULT: A STRIKE-SLIP FAULT? .

Choong Chee Meng, Manuel Pubellier, . (2015) Geological Structures of the Kinta Valley Revisited Using Drainage Anomalies. Geological Structures of the Kinta Valley Revisited Using Drainage Anomalies .

Chuah, L.F. and Yusup, S. and Abd Aziz, A.R. and Bokhari, A. and Klemeš, J.J. and Abdullah, M.Z. (2015) Intensification of biodiesel synthesis from waste cooking oil (Palm Olein) in a Hydrodynamic Cavitation Reactor: Effect of operating parameters on methyl ester conversion. Chemical Engineering and Processing: Process Intensification, 95 . pp. 235-240.

Chuan, N.K. and Sivaji, A. and Ahmad, W.F.W. (2015) Proposed Usability Heuristics for Testing Gestural Interaction. [["eprint_typename_conference\_item" not defined]]

Chughtai, O. and Badruddin, N. and Awang, A. (2015) Distributed on-demand multi-optional routing protocol in multi-hop wireless networks. [["eprint_typename_conference\_item" not defined]]

Chughtai, O. and Badruddin, N. and Awang, A. (2015) A congestion-aware and energy efficient traffic Load balancing Scheme for routing in WSNs. [["eprint_typename_conference\_item" not defined]]

Chung, T.D. and Ibrahim, R.B. and Asirvadam, V.S. and Saad, N.B. and Hassan, S.M. (2015) Simulation of WirelessHART networked control system with packet dropout. [["eprint_typename_conference\_item" not defined]]

D

Dan-Mallam, Y. and Abdullah, M.Z. and Yusoff, P.S.M.M. (2015) Mechanical properties of short and continuous kenaf/PET fibre reinforced polyoxymethylene composite. Advanced Composites Letters, 24 (4). pp. 81-91.

Dennis, J.-O. and Ahmed, A.-Y. and Khir, M.-H. (2015) Fabrication and characterization of a CMOS-MEMS humidity sensor. Sensors (Switzerland), 15 (7). pp. 16674-16687.

Dennis, J.O. and Ahmad, F. and Md Khir, M.B. and Hamid, N.H.B. (2015) Optical characterization of lorentz force based CMOS-MEMS magnetic field sensor. Sensors (Switzerland), 15 (8). pp. 18256-18269.

Dennis, J.O. and Rabih, A.A.S. and Md Khir, M.H. and Abdullah, M.A. and Ahmed, M.G.A. (2015) Review on exhaled hydrogen peroxide as a potential biomarker for diagnosis of inflammatory lung diseases. Journal of Biomimetics, Biomaterials and Biomedical Engineering, 22 . pp. 77-87.

Dewangan, S. and Gangopadhyay, S. and Biswas, C.K. (2015) Study of surface integrity and dimensional accuracy in EDM using Fuzzy TOPSIS and sensitivity analysis. Measurement: Journal of the International Measurement Confederation, 63 . pp. 364-376.

Dutta, A. and Banerjee, P. and Sarkar, D. and Bhattacharjee, S. and Chakrabarti, S. (2015) Degradation of Trypan Blue in wastewater by sunlight-assisted modified photo-Fenton reaction. Desalination and Water Treatment, 56 (6). pp. 1498-1506.

E

Ee, L.K. and Zamin, N. and Aziz, I.A. and Haron, N.S. and Mehat, M. and Ismail, N.N. (2015) Bedrunn3R: An intelligent running alarm clock. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17890-17898.

Eisakhani, M. and Abdullah, M.P. and Karim, O.A. and Malakahmad, A. (2015) Best management practices for water quality improvement of Bertam River, Malaysia. International Journal of Applied Engineering Research, 10 (2). pp. 3923-3935.

Elaina, N.S. and Malik, A. and Badruddin, N. and Abdullah, J.M. and Reza, M.F. (2015) Somatosensory source localization for the magnetoencephalography (MEG) inverse problem in patients with brain tumor. [["eprint_typename_conference\_item" not defined]]

Elaina, Nor Safira and Malik, Aamir Saeed and Badruddin , Nasreen and Abdullah, Jafri Malin and Reza, Faruque (2015) Somatosensory source localization for the magnetoencephalography (MEG) inverse problem in patients with brain tumor. In: 2015 2nd International Conference on Biomedical Engineering (ICoBE).

Elraies, K.A. and Kalwar, S.A. and Ayoub, M.A. and Belhaj, H.A. (2015) Experimental investigation of alkali-surfactant-polymer flooding forcarbonate reservoirs. International Journal of Applied Engineering Research, 10 (11). pp. 28401-28410.

Esmaeili, A. and Ayoub, M.A. (2015) Local thermal effect on vapor extraction (VAPEX) for heavy oil enhanced recovery. [["eprint_typename_conference\_item" not defined]]

Esmaeili, A. and Ayoub, M.A. (2015) Local thermal effect on vapor extraction (VAPEX) for heavy oil enhanced recovery. [["eprint_typename_conference\_item" not defined]]

Ezechi, E.H. and Kutty, S.R.B.M. and Malakahmad, A. and Isa, M.H. (2015) Characterization and optimization of effluent dye removal using a new low cost adsorbent: Equilibrium, kinetics and thermodynamic study. Process Safety and Environmental Protection, 98 . pp. 16-32.

F

Faye, I. (2015) Students' perception in the use of self-made YouTube videos in teaching Mathematics. [["eprint_typename_conference\_item" not defined]]

Firmansyah, and Aziz, A.R.A. (2015) Investigation of auto-ignition of octane-CNG mixture in HCCI engine. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2235-2242.

Firmansyah, and Aziz, A.R.A. and Heikal, M.R. (2015) The combustion behavior of diesel/CNG mixtures in a constant volume combustion chamber. [["eprint_typename_conference\_item" not defined]]

Firmansyah, F. and Ayandotun, W.B. and Zainal, E.Z. and Aziz, A.A.R.A. and Heika, M.R. (2015) Performance of CO2 enrich CNG in direct injection engine. [["eprint_typename_conference\_item" not defined]]

Fuddoly, A. and Jaafar, J. and Zamin, N. (2015) News classification with human annotators: A case study. Jurnal Teknologi, 74 (10). pp. 21-28.

Fudzin, A.F. and Majid, M.A.A. (2015) Reliability and availability analysis for robot subsystem in automotive assembly plant: A case study. [["eprint_typename_conference\_item" not defined]]

Fui Chin, B.L. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2015) Optimization study of catalytic co-gasification of rubber seed shell and high density polyethylene waste for hydrogen production using response surface methodology. Springer International Publishing, pp. 209-223.

G

Gafare, M. and Khir, M.H.M. and Rabih, A. and Ahmed, A. and Dennis, J.O. (2015) Modeling and simulation of polysilicon piezoresistors in a CMOS-MEMS resonator for mass detection. [["eprint_typename_conference\_item" not defined]]

Gasim, H. and Megat, A.R.M.M.A. and Shamsul, R.M.K. (2015) Treatment of petroleum refinery wastewater using extended aeration activated sludge. International Journal of Engineering Research in Africa, 13 . pp. 1-7.

Ghazali, Z. and Zahid, M. (2015) Environmental sustainability: Carbon emission reduction strategies and reporting among Malaysian construction companies. [["eprint_typename_conference\_item" not defined]]

Gilani, S.F.-H. and Gilani, S.I.-H. and Baharudin, Z. and Ibrahim, R. (2015) Development of energy harvesting system using rotation mechanism of a revolving door. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10159-10163.

Gilani, S.F.-H. and Gilani, S.I.-H. and Baharudin, Z. and Ibrahim, R. (2015) Development of energy harvesting system using rotation mechanism of a revolving door. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10159-10163.

Gillani, S.A. and Shah, P.A. and Qayyum, A. and Hasbullah, H.B. (2015) MAC layer challenges and proposed protocols for vehicular ad-hoc networks. Advances in Intelligent Systems and Computing, 306 . pp. 3-13.

Gitan, A.A. and Abdulmalek, S.H. and Dihrab, S.S. (2015) Tracking collector consideration of tilted collector solar updraft tower power plant under Malaysia climate conditions. Energy, 93 . pp. 1467-1477.

Goh Thian Lai, Abdul Ghani Rafek, Ailie Sofyiana Serasa, Norbert, . (2015) Correlation of ultrasonic velocity slowness with uniaxial compressive strength of schists in Malaysia. Correlation of ultrasonic velocity slowness with uniaxial compressive strength of schists in Malaysia .

Gonfa, G. and Bustam, M.A. and Muhammad, N. and Khan, A.S. (2015) Evaluation of Thermophysical Properties of Functionalized Imidazolium Thiocyanate Based Ionic Liquids. Industrial and Engineering Chemistry Research, 54 (49). pp. 12428-12437.

H

Habib, I. and Badruddin, N. and Drieberg, M. (2015) Delay-based load-balancing routing (DLBR) algorithm for wireless ad-hoc networks. [["eprint_typename_conference\_item" not defined]]

Habib, K. (2015) Performance investigation of a waste heat driven pressurized adsorption refrigeration cycle. [["eprint_typename_conference\_item" not defined]]

Habib, K. and Assadi, M.K. and Zainudin, M.H.B. (2015) Study of solar driven silica gel-water based adsorption chiller. [["eprint_typename_conference\_item" not defined]]

Habib, Khairul and ASSADI, M.KH (2015) Study of Solar Driven Silica gel-Water based Adsorption Chiller. [Citation Index Journal]

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2015) Investigation of deposit formation in direct-injection spark-ignition engine powered on syngas. International Journal of Automotive Technology, 16 (3). pp. 479-485.

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2015) Methane enrichment of syngas (H2/CO) in a spark-ignition directinjection engine: Combustion, performance and emissions comparison with syngas and Compressed Natural Gas. Energy, 90 . pp. 2006-2015.

Haider, N. and Imran, M. and Younis, M. and Saad, N. and Guizani, M. (2015) A novel mechanism for restoring actor connected coverage in wireless sensor and actor networks. [["eprint_typename_conference\_item" not defined]]

Hakro, M.R. and Harahap, I.S.H. (2015) Flume experiments for investigation of rainfall-induced slope failure. International Journal of Engineering Research in Africa, 16 . pp. 49-56.

Hakro, Muhammad Rehan and Harahap, Indra Sati Hamonangan (2015) Tyoe of Slope Failure Identified from Pore Pressure and Moisture Content Measurements. [Non-Citation Index Journal]

Hamizol, M.S. and Megat-Yusoff, P.S.M. (2015) Tensile strength of single continuous fiber extracted from mengkuang leaves. Jurnal Teknologi, 76 (3). pp. 101-107.

Hamizol, M.S. and Megat-Yusoff, P.S.M. (2015) Tensile strength of single continuous fiber extracted from mengkuang leaves. Jurnal Teknologi, 76 (3). pp. 101-107.

Hamzah, H.I. and Jung, L.T. and Mutalib, A.A. (2015) Prevention of digital music file duplication. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 427-435.

Hani, A.F.M. and Feng, Y.X. and Tang, T.B. and Kiguchi, M. (2015) Assessment of brain haemodynamic responses using optical topography modality. [["eprint_typename_conference\_item" not defined]]

Hani, A.M. and Feng, Y.X. and Tang, T.B. and Kiguchi, M. (2015) The effect of working memory load on prefrontal cortex activation: An optical topography study. ARPN Journal of Engineering and Applied Sciences, 10 (20). pp. 9846-9852.

Hanif, M.F. and Ul Mustafa, M.R. and Hashim, A.M. and Yusof, K.W. (2015) Spatio-temporal change analysis of Perak river basin using remote sensing and GIS. [["eprint_typename_conference\_item" not defined]]

Hanita, D. and Nurul Fauzana, I.G. and Nursyarizal, M.N. and Taib, I. (2015) A zigbee-based continuous online vital sign monitoring system. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 391-395.

Harun, N.Y. and Afzal, M.T. (2015) Chemical and mechanical properties of pellets made from agricultural and woody biomass blends. Transactions of the ASABE, 58 (4). pp. 921-930.

Hasan, K.N.M. and Mohamad, A.S. (2015) Modeling and simulation of modal analysis-based technique on UTP distribution network for evaluating harmonic resonances. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10255-10263.

Hasan, M.K. and Karim, S.A.A. and Sulaiman, J. (2015) Graphical analysis of Rosenzweig-MacArthur model via adams-moultan and fourth order Runge-Kutta methods. [["eprint_typename_conference\_item" not defined]]

Hasni, M.M. and Majid, Z.A. and Senu, N. (2015) Direct 4-point 1-step block method for solving Dirichlet boundary value problem. [["eprint_typename_conference\_item" not defined]]

Hassan, K. and Abdullah, A. (2015) Modeling the economic impacts of oil production in sudan: An empirical analysis for productive sectors. Advanced Science Letters, 21 (6). pp. 2166-2168.

Hassan, M.A. and Malik, A.S. and Nicolas, W. and Faye, I. and Nordin, N. (2015) Reliability of bench-mark datasets for crowd analytic surveillance. [["eprint_typename_conference\_item" not defined]]

Hassan, N.H. and Arshad, N.I. and Mustapha, E.E. (2015) A preliminary study on learning orientation, information technology infrastructure flexibility and agility. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17816-17823.

Hassan, R. and Marimuthu, M. and Johl, S.K. (2015) Demographic diversity and firm value: A review on large companies using panel data approach. [["eprint_typename_conference\_item" not defined]]

Hassan, R. and Marimuthu, M. and Johl, S.K. (2015) Ethnic diversity on boards and market performance: An empirical investigation in Malaysia. Advanced Science Letters, 21 (5). pp. 1099-1103.

Hassan, Rohail and Marimuthu, Maran (2015) Corporate Governance Effect on Ownership and Control in Firms An Empirical Evidence from Pakistan. [Citation Index Journal]

Hassan, Rohail and Marimuthu, Maran and Satirenjit , Kaur Johl (2015) Demographic Diversity and Firm Value: A Review on Large Companies Using Panel Data Approach. [Citation Index Journal]

Hassan, Rohail and Marimuthu, Maran and Satirenjit , Kaur Johl (2015) Diversity, Corporate Governance and Implication on Firm Financial Performance. [Citation Index Journal]

Hassan, Rohail and Marimuthu, Maran and Satirenjit , Kaur Johl (2015) Ethnic Diversity on Boards and Market Performance: An Empirical Investigation in Malaysia. [Citation Index Journal]

Hassan, Rohail and Marimuthu, Maran (2015) Corporate Governance Effect on Ownership and Control in Firms: An Empirical Evidence from Pakistan. [Citation Index Journal]

Hassan, S. and Khosravi, A. and Jaafar, J. (2015) Examining performance of aggregation algorithms for neural network-based electricity demand forecasting. International Journal of Electrical Power and Energy Systems, 64 . pp. 1098-1105.

Hassan, S. and Khosravi, A. and Jaafar, J. (2015) Training of interval type-2 fuzzy logic system using extreme learning machine for load forecasting. [["eprint_typename_conference\_item" not defined]]

Haylay Tsegab Gebretsadik, Chow Weng Sum, Aaron W Hunter, . (2015) Preservation of Marine Chemical Signatures in Upper Devonian Carbonates of Kinta Valley, Peninsular Malaysia: Implications for Chemostratigraphy. Preservation of Marine Chemical Signatures in Upper Devonian Carbonates of Kinta Valley, Peninsular Malaysia: Implications for Chemostratigraphy .

Hendriana, D. and Firmansyah, T. and Setiawan, J.D. and Garinto, D. (2015) Design and optimization of low speed horizontal-axis wind turbine using OpenFOAM. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10264-10274.

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. (2015) A new meshless local B-spline basis functions-FD method for two-dimensional heat conduction problems. International Journal of Numerical Methods for Heat and Fluid Flow, 25 (2). pp. 225-251.

Hosseini, S.N. and Shuker, M.T. and Hosseini, Z. and Joao Tomocene, T. and Shabib-asl, A. and Sabet, M. (2015) The role of salinity and brine ions in interfacial tension reduction while using surfactant for enhanced oil recovery. Research Journal of Applied Sciences, Engineering and Technology, 9 (9). pp. 722-726.

Hung, N.T. and Ismail, I. and Saad, N.B. and Tufa, L. and Irfan, M. (2015) Design of optimal GBN sequences for identification of MIMO systems. [["eprint_typename_conference\_item" not defined]]

Hussain, A. and Abolaban, F. and Khubaib, S.M. and Mubin, S. and Ahmed, I. (2015) Steady state and transient thermalhydraulic analysis of PHWR using COBRA-3C/RERTR. Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, 39 . pp. 233-242.

Hyder, R. and Kamel, N. and Boon, T.T. and Reza, F. (2015) Mapping of language brain areas in patients with brain tumors. [["eprint_typename_conference\_item" not defined]]

I

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2015) Single phase inverter with wide-input voltage range for solar photovoltaic application. [["eprint_typename_conference\_item" not defined]]

Ibrahim, O. and Yahaya, N.Z. and Saad, N. and Umar, M.W. (2015) Matlab/Simulink model of solar PV array with perturb and observe MPPT for maximising PV array efficiency. [["eprint_typename_conference\_item" not defined]]

Ibrahim, O. and Yahaya, N.Z. and Saad, N. and Umar, M.W. (2015) Matlab/Simulink model of solar PV array with perturb and observe MPPT for maximising PV array efficiency. [["eprint_typename_conference\_item" not defined]]

Imam, A.A. and Basri, S.B. and Ahmad, R.B. (2015) Synchronization algorithm for remote heterogeneous database environment. Advances in Intelligent Systems and Computing, 349 . pp. 55-65.

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. and Khan, Z. (2015) MINLP optimization for heat integration of bio-hydrogen production from palm waste. Journal of Engineering Science and Technology, 10 (Spec.i). pp. 50-60.

Irawan, S. and Bharadwaj, A.M. and Temesgen, B. and Karuppanan, S. and Abdullah, M.Z.B. (2015) Effect of wear on the burst strength of l-80 steel casing. [["eprint_typename_conference\_item" not defined]]

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. (2015) An on-line condition monitoring system for induction motors via instantaneous power analysis. Journal of Mechanical Science and Technology, 29 (4). pp. 1483-1492.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Hung, N.T. and Magzoub, M.A. (2015) Analysis of Bearing Surface Roughness Defects in Induction Motors. Journal of Failure Analysis and Prevention, 15 (5). pp. 730-736.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Tuan Hung, N. (2015) Diagnosis of distributed faults in outer race of bearings via Park's transformation method. [["eprint_typename_conference\_item" not defined]]

Irshad, K. and Habib, K. and Basrawi, F. and Thirumalaiswamy, N. and Saidur, R. and Saha, B.B. (2015) Thermal comfort study of a building equipped with thermoelectric air duct system for tropical climate. Applied Thermal Engineering, 91 . pp. 1141-1155.

Irshad, K. and Habib, K. and Thirumalaiswamy, N. (2015) Performance evaluation of PV-Trombe wall for sustainable building development. [["eprint_typename_conference\_item" not defined]]

Irshad, K. and Habib, K. and Thirumalaiswamy, N. and Saha, B.B. (2015) Performance analysis of a thermoelectric air duct system for energy-efficient buildings. Energy, 91 . pp. 1009-1017.

Isa, M.H. (2015) Simulated textile dye wastewater treatment by electrochemical oxidation: application of response surface methodology (RSM). Desalination and Water Treatment, 53 (8). pp. 2260-2265.

Ishmanov, F. and Malik, A.S. and Kim, S.W. and Begalov, B. (2015) Trust management system in wireless sensor networks: Design considerations and research challenges. Transactions on Emerging Telecommunications Technologies, 26 (2). pp. 107-130.

Islam, B. and Baharudin, Z. and Nallagownden, P. (2015) Effect of input variables selection on energy demand prediction based on intelligent hybrid neural networks. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10228-10235.

Ismail, Atef and Lee, Yen Cheong and Mahmoud, Z M M (2015) Puzzle of the folding potential on the nuclear halo reactions. [Citation Index Journal]

Ismail, Atef and Lee, Yen Cheong and Tammam, M (2015) Elastic scattering analysis of p+40Ca at incident energies from threshold to 48.4 MeV and nuclear matter radius. [Citation Index Journal]

irshad, kashif and Habib, Khairul and Nagarajan, T and Saha, Bidyut B. (2015) Performance analysis of a thermoelectric air duct system for energy-efficient buildings. Energy , 91 . pp. 1009-1017. ISSN 3605442

irshad, kashif and Habib, Khairul and basrawi, firdaus and Nagarajan, T and saidur, R and Saha, Bidyut B. (2015) Thermal comfort study of a building equipped with thermoelectric air duct system for tropical climate. Applied Thermal Engineering, 91 . pp. 1141-1155. ISSN 13594311

J

JAMALUDIN SITI NUR SAKINAH, . (2015) A parametric study on design and characteristics of stepwise-built functionally graded Hydroxyapatite/Titanium. A parametric study on design and characteristics of stepwise-built functionally graded Hydroxyapatite/Titanium .

Jaafar, J. and Janjua, U.I. and Lai, F.W. (2015) Software effective risk management: An evaluation of risk management process models and standards. Lecture Notes in Electrical Engineering, 339 . pp. 837-844.

Jaafar, Jafreezal and Uzair , Iqbal Janjua and Lai, Fong Woon (2015) Software Effective Risk Management: An Evaluation of Risk Management Process Models and Standards. In: Information Science and Applications. Lecture Notes in Electrical Engineering, pp. 837-844.

Jahan, S. and Sakidin, H. (2015) Influence of heat transfer on the MHD stagnation point flow of a power law fluid with convective boundary condition. Jurnal Teknologi, 77 (20). pp. 53-59.

Jamali, A.A. and Nor, N.M. and Ibrahim, T. (2015) Energy storage systems and their sizing techniques in power system - A review. [["eprint_typename_conference\_item" not defined]]

Jamali, A.A. and Nor, N.M. and Ibrahim, T. (2015) Energy storage systems and their sizing techniques in power system - A review. [["eprint_typename_conference\_item" not defined]]

Jamaludin, M.I. and Matori, A.N. and Myint, K.C. (2015) Application of NIR to determine effects of hydrocarbon microseepage in oil palm vegetation stress. [["eprint_typename_conference\_item" not defined]]

Jamil, I.E. and Al-Kayiem, H.H. (2015) Simulation analysis of the oil/water structure in the downhole with presence of hydrocyclone separator. [["eprint_typename_conference\_item" not defined]]

Jan, Amin and Marimuthu, Maran (2015) Bankruptcy Profile of Foreign vs. Domestic Islamic Banks of Malaysia: A Post Crisis period Analysis. [Citation Index Journal] (Unpublished)

Jan, Amin and Marimuthu, Maran (2015) Altman Model and Bankruptcy Profile of Islamic Banking Industry A Comparative Analysis on Financial Performance. [Citation Index Journal]

Jan, Amin and Marimuthu, Maran (2015) Bankruptcy and Sustainability A Conceptual Review on Islamic Banking Industry. [Citation Index Journal]

Jan, Amin and Marimuthu, Maran (2015) Sustainability Profile of Islamic Banking Industry: Evidence from World Top Five Islamic Banking Countries. [Citation Index Journal]

Jan, Amin and Marimuthu, Maran (2015) Altman Model and Bankruptcy Profile of Islamic Banking Industry: A Comparative Analysis on Financial Performance. [Citation Index Journal]

Jan, Amin and Marimuthu, Maran (2015) Bankruptcy and Sustainability: A Conceptual Review on Islamic Banking Industry. [Citation Index Journal]

Japper-Jaafar, A. and Bhaskoro, P.T. and Sean, L.L. and Sariman, M.Z. and Nugroho, H. (2015) Yield stress measurement of gelled waxy crude oil: Gap size requirement. Journal of Non-Newtonian Fluid Mechanics, 218 . pp. 71-82.

Javaid, M.U. and Ghazali, Z. and Binsha, A.S.N. and Langove, N. (2015) Psychosocial risks: Health and wellbeing of workers in petrochemical industry of Malaysia. [["eprint_typename_conference\_item" not defined]]

Jebaraj, S. and Srinivasa Rao, P. (2015) High-efficiency solar oven for tropical countries. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10213-10217.

Jeoti, V. and Nawaz, F. (2015) Wireless RFID/sensor network using SAW (WiRSeNS): A feasibility study. [["eprint_typename_conference\_item" not defined]]

Jilani, M.T. and Wen, W.P. and Zakariya, M.A. and Cheong, L.Y. and Ur Rehman, M.Z. (2015) An improved design of microwave biosensor for measurement of tissues moisture. [["eprint_typename_conference\_item" not defined]]

Johnson, O.A. and Madzlan, N. and Kamaruddin, I. (2015) Encapsulation of petroleum sludge in building blocks. Construction and Building Materials, 78 . pp. 281-288.

Johnson, O.A. and Madzlan, N. and Kamaruddin, I. and Oloruntobi, O.O. (2015) Building blocks from petroleum sludge: Leachability and toxicity studies. International Journal of Applied Engineering Research, 10 (24). pp. 45479-45481.

K

Kamal, S. and Sharma, K.V. and Jayaganthan, R. and Prakash, S. (2015) Hot corrosion behavior of thermal spray coatings on superalloy in coal-fired boiler environment. Journal of Materials Research, 30 (18). pp. 2829-2843.

Kannan, R. and Shanmuga Priyan, S. and Setiawan, J.D. (2015) Experimental verification of multilevel inverter with MPPT based solar energy. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10236-10244.

Karajeh, A.I. and Ibrahim, M.Y.B. and Lode, N.A.B. (2015) Impact of voluntary disclosure on earnings management in Malaysian companies: A proposed analysis. [["eprint_typename_conference\_item" not defined]]

Kareem, M. W. and Habib, Khairul and Ruslan, M. H. (2015) Numerical modelling of multi-pass solar dryer filled with granite pebbles for thermal storage enhancement. [Citation Index Journal]

Kareem, M. W. and Habib, Khairul and irshad, kashif (2015) TRANSIENT MODELLING OF MULTI-PASS SOLAR THERMAL COLLECTOR WITH SENSIBLE ENERGY STORING MATRIX. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10200-10205. ISSN 1819-6608

Kareem, M.W. and Habib, K. and Ruslan, M.H. (2015) Numerical modelling of multi-pass solar dryer filled with granite pebbles for thermal storage enhancement. [["eprint_typename_conference\_item" not defined]]

Karia, N. and Asaari, M.H.A.H. and Mohamad, N. and Kamaruddin, S. (2015) Assessing Halal logistics competence: An Islamic-based and resource-based view. [["eprint_typename_conference\_item" not defined]]

Khairul Arifin Mohd Noh, Muhammad Hasif Syazwan Shamsul, Mohd Mo, . (2015) Structural Analysis of Bukit Bunuh Impact Crater using Transient Electromagnetic Method. Structural Analysis of Bukit Bunuh Impact Crater using Transient Electromagnetic Method .

Khairul Arifin Mohd Noh, Zuhar Zahir Tuan Harith, Abdul Halim Ab, . (2015) Hybrid Source-Receiver Geometry for Short-Spread Layout in 2D Seismic Reflection Acquisition. Hybrid Source-Receiver Geometry for Short-Spread Layout in 2D Seismic Reflection Acquisition .

Khalid, S. and Ali, S.Q. (2015) Design of highly selective ultra-wideband (UWB) bandpass filter using step impedance resonator and parallel coupled lines. [["eprint_typename_conference\_item" not defined]]

Khan, A.H. and Javaid, N. and Imran, M. and Khan, Z.A. and Qasim, U. and Haider, N. (2015) DYN-NbC: A new routing scheme to maximize lifetime and throughput of WSNs. [["eprint_typename_conference\_item" not defined]]

Khan, A.M. and Jeoti, V. (2015) On time-domain OFDM channel estimation: Use of pilots correlation for digital video broadcasting (DVB) cable receiver. Optoelectronics and Advanced Materials, Rapid Communications, 9 (5-6). pp. 891-897.

Khan, A.M. and Jeoti, V. and Azman Zakariya, M. (2015) Pilot based pre FFT signal to noise ratio estimation for OFDM systems in Rayleigh-fading channel. Lecture Notes in Electrical Engineering, 315 . pp. 171-182.

Khan, J. and Malik, A.S. and Kamel, N. and Dass, S.C. and Affandi, A.M. (2015) Segmentation of acne lesion using fuzzy C-means technique with intelligent selection of the desired cluster. [["eprint_typename_conference\_item" not defined]]

Khan, Javed and Malik, Aamir Saeed and Kamel , Nidal and Dass, Sarat Chandra and Affandi, Azura Mohd (2015) Segmentation of acne lesion using fuzzy C-means technique with intelligent selection of the desired cluster. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Khan, M.A. and Ibrahim, M.Y. (2015) Corporate governance mechanism constraining Earning Management in Malaysian listed companies. [["eprint_typename_conference\_item" not defined]]

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. and Tan, I.M. (2015) A case study on preparation, stability and physical properties of water in diesel emulsion. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17289-17293.

Khan, Muhammad Burhan and Lee, Xue Yong and Nisar, Humaira and Ng, Choon Aun and Yeap, Kim Ho and Malik, Aamir Saeed (2015) Digital Image Processing and Analysis for Activated Sludge Wastewater Treatment. Advances in Experimental Medicine and Biology .

Khan, R.A. and Liew, M.S. and Zawawi, N.A.W.A. (2015) Impulse response analysis for Malaysian construction sector by vector error correction model. Malaysian Construction Research Journal, 16 (1). pp. 1-14.

Khan, W.Z. and Saad, N.M. and Aalsalem, M.Y. and Xaing, Y. (2015) Detecting clones in wireless sensor networks using Single Stage Memory Random Walk with Network Division. [["eprint_typename_conference\_item" not defined]]

Khan, Z. and Razali, R.B. and Daud, H. and Nor, N.M. and Firuzabad, M.F. (2015) The largest studentized residual test for bad data identification in state estimation of a power system. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10184-10191.

Khanh, D.V.K. and Vasant, P.M. and Elamvazuthi, I. and Dieu, V.N. (2015) Geometric optimization of thermo-electric coolers using simulated annealing. [["eprint_typename_conference\_item" not defined]]

Khanh, D.V.K. and Vasant, P.M. and Elamvazuthi, I. and Dieu, V.N. (2015) Multi-objective optimization of two-stage thermo-electric cooler using differential evolution: MO optimization of TEC using DE. IGI Global, pp. 139-169.

Kheradmand, M. and Castro-Gomes, J. and Azenha, M. and Silva, P.D. and De Aguiar, J.L.B. and Zoorob, S.E. (2015) Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems. Construction and Building Materials, 89 . pp. 48-59.

Khoa, T.H. and Vasant, P.M. and Balbir Singh, M.S. and Dieu, V.N. (2015) Solving economic dispatch problem with valve-point effects using swarm-based mean�variance mapping optimization (MVMOS). Cogent Engineering, 2 (1).

Khoa, T.H. and Vasant, P.M. and Singh, B.S.M. and Dieu, V.N. (2015) Swarm-based mean-variance mapping optimization (MVMOS) for solving non-convex economic dispatch problems. IGI Global, pp. 211-251.

Kian Seng, Lee (2015) Autonomous Patrol and Surveillance System using Unmanned Aerial Vehicles. In: 15th IEEE International Conference on Environment and Electrical Engineering.

Kim, D.K. and Choi, H.S. and Shin, C.S. and Liew, M.S. and Yu, S.Y. and Park, K.S. (2015) Fatigue performance of deepwater SCR under short-term VIV considering various S-N curves. Structural Engineering and Mechanics, 53 (5). pp. 881-896.

Kim, D.K. and Liew, M.S. and Yu, S.Y. and Park, K.S. and Choi, H.S. (2015) Method for estimating soft clay type seabed embedment by pipeline movement. [["eprint_typename_conference\_item" not defined]]

Kurian, V.J. and Al-Yacouby, A.M. and Sebastian, A.A. and Liew, M.S. and Idichandy, V.G. (2015) Effect of sacrificial anodes and marine growth on hydrodynamic coefficients of rigid cylinders. [["eprint_typename_conference\_item" not defined]]

Kurian, V.J. and Goh, S.S. and Wahab, M.M.A. and Liew, M.S. (2015) Component reliability assessment of offshore jacket platforms. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 1-10.

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2015) An experimental investigation of the responses of classic spar platform subjected to bi-directional waves. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 11-17.

L

Lai, Fong Woon (2015) Empirical Examination of Enterprise Risk Management’s Value Creation Mechanism. [Citation Index Journal]

Lai, Fong woon and Micheal, Drieberg and Sophea, Ieng and Ammar Redza Ahmad Rizal, Redza Ahmad Rizal (2015) An Examination of Consumer Preferences and Socio-economic Factors on the Demand for Electric Train System in Malaysia. In: The 25th International Business Information Management Association Conference,, 7-8 May 2015, Amsterdam, Netherlands.

Lai, Fong-Woon (2015) Empirical Examination of Enterprise Risk Management’s Value Creation Mechanism. [Citation Index Journal]

Langove, N. and Isha, A.S.N. and Javaid, M.U. (2015) Time pressure, employee well-being, perceived organizational support and turnover intention of information technology executives in Malaysia: A proposed conceptual framework. Advanced Science Letters, 21 (6). pp. 1898-1901.

Latip, A.S.A. and Matori, A. and Aobpaet, A. and Din, A.H.M. (2015) Monitoring of offshore platform deformation with stanford method of Persistent Scatterer (StaMPS). [["eprint_typename_conference\_item" not defined]]

Lee, K.S. and Ovinis, M. and Nagarajan, T. and Seulin, R. and Morel, O. (2015) Autonomous patrol and surveillance system using unmanned aerial vehicles. [["eprint_typename_conference\_item" not defined]]

Leong, S.Y. and Kutty, S.R.M. and Tan, C.K. and Tey, L.H. (2015) Comparative study on the effect of organic waste on lauric acid produced by hermetia illucens larvae via bioconversion. Journal of Engineering Science and Technology, 10 (Spec. ). pp. 52-63.

Liew, M.S. and Nordin, A.H. and Lim, E.S. and Zawawi, N.A.W.A. (2015) Wave energy spectrum for the south China sea. Marine Technology, 52 (3). pp. 15-18.

Liew, M.S. and Zawawi, N.A.W.A. (2015) The decommissioning challenge. Marine Technology, 52 (3). pp. 50-54.

Lock, S.S.M. and Lau, K.K. and Ahmad, F. and Shariff, A.M. (2015) Modeling, simulation and economic analysis of CO2 capture from natural gas using cocurrent, countercurrent and radial crossflow hollow fiber membrane. International Journal of Greenhouse Gas Control, 36 . pp. 114-134.

Lubis, A.M.H.S. and Ariwahjoedi, B. and Sudin, M.B. (2015) Investigation on oxidation and thermal stability of jatropha oil. Jurnal Teknologi, 77 (21). pp. 79-83.

M

M Nizarul, M. Hermana, Yasir Bashir, Deva Ghosh, . (2015) Improving thin bed identification in Sarawak Basin Field using short time fourier transform half cepstrum (STFTHC) methos. Improving thin bed identification in Sarawak Basin Field using short time fourier transform half cepstrum (STFTHC) methos .

M Zain, A (2015) A Token of Love for Your Body's Health and Beauty. Paltridge Publishing. ISBN 978-1-4828-5264-6

Madni, T.M. and Nayan, Y. and Sulaiman, S. and Tahir, M. (2015) Comparative investigation of medical contents using desktop and tabletop technologies. Lecture Notes in Electrical Engineering, 339 . pp. 225-233.

Magzoub, M.A. and Saad, N.B. and Ibrahim, R.B. and Irfan, M. (2015) The effects of internal and external disturbances for the hybrid fuzzy-fuzzy controller applied to IM-drive. [["eprint_typename_conference\_item" not defined]]

Maharun, M. and Baharom, M.B. and Mohd, M.S. (2015) Ride comfort simulation of a vehicle equipped with semiactive steering system. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2495-2503.

Mahesh, K. and Al Nallagownden, P. and Al Elamvazuthi, I. (2015) Optimal placement and sizing of DG in distribution system using accelerated PSO for power loss minimization. [["eprint_typename_conference\_item" not defined]]

Mahesh, K. and Al Nallagownden, P. and Al Elamvazuthi, I. (2015) Optimal placement and sizing of DG in distribution system using accelerated PSO for power loss minimization. [["eprint_typename_conference\_item" not defined]]

Mahgoub, B.K.M. and Hassan, S. and Sulaiman, S.A. (2015) Effect of varying engine parameters and syngas composition on the combustion characteristics, performance and emission of syngas-diesel dual fuel engine - A review. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7712-7718.

Mahgoub, B.K.M. and Hassan, S. and Sulaiman, S.A. (2015) Effect of varying engine parameters and syngas composition on the combustion characteristics, performance and emission of syngas-diesel dual fuel engine - A review. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7712-7718.

Mahgoub, B.K.M. and Sulaiman, S.A. and A Karim, Z.A. and Hagos, F.Y. (2015) Experimental study on the effect of varying syngas composition on the emissions of dual fuel CI engine operating at various engine speeds. [["eprint_typename_conference\_item" not defined]]

Mahgoub, B.K.M. and Sulaiman, S.A. and Karim, Z.A.A. (2015) Performance study of imitated syngas in a dual-fuel compression ignition diesel engine. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2282-2293.

Mahmod, M.F. and Bakar, E.A. and Othman, A.R. and Ramzi, A.R. and Goh, C.Y. (2015) Fiber glass composite laminates (FGCL) measurement using 3 axis pulse echo scanning unit. Jurnal Teknologi, 76 (1). pp. 147-155.

Makki, B.I. and Salleh, R. and Harun, H. (2015) Work readiness, career self-efficacy and career exploration: A correlation analysis. [["eprint_typename_conference\_item" not defined]]

Malik, A.S. and Khairuddin, R.N.H.R. and Amin, H.U. and Smith, M.L. and Kamel, N. and Abdullah, J.M. and Fawzy, S.M. and Shim, S. (2015) EEG based evaluation of stereoscopic 3D displays for viewer discomfort. BioMedical Engineering Online, 14 (1).

Malik, Aamir Saeed and Amin, Hafeez Ullah and Badruddin , Nasreen and Kamel, Nidal S. and Ahmad, Rana Fayyaz and Mumtaz, Wajid (2015) Evaluation of Stereoscopic 3D Based Educational Contents for Long-Term Memorization. Annals of Neurology .

Malik, Aamir Saeed and Raja Khairuddin, Raja Nur Hamizah and Amin, Hafeez Ullah and Smith, Mark Llewellyn and Kamel , Nidal and Abdullah, Jafri Malin and Fawzy, Samar Mohammad and Shim, Seongo (2015) EEG based evaluation of stereoscopic 3D displays for viewer discomfort. BioMedical Engineering Online . ISSN 1475925X

Mansor, M.F.C. and Cheng, E.M. and Malek, M.F.A. and Beh, H.G. and Chik, A. and Khor, S.F. and Rojan, M.A. and Nasir, N.F.M. and Ong, S.A. and Bakar, S.A. (2015) Study on 10 GHz electromagnetic wave absorption of cullet doped with iron (II, III) oxide. [["eprint_typename_conference\_item" not defined]]

Marimuthu, Maran and Hassan, Rohail and Johl, S.K (2015) Demographic Diversity and Firm Value: A Review on Large Companies Using Panel Data Approach. In: 2nd International Symposium on Technology Management and Emerging Technologies (ISTMET2015), 25-27 August 2015, Langkawi Island, Kedah.

Marimuthu, Maran and Hassan, Rohail and Johl, S.K. (2015) Ethnic Diversity on Boards and Market Performance. In: International Conference on Business, Management, Tourism and Hospitality 2015 (BIZMATOUR 2015), 12-14 May 2015, Melaka.

Marimuthu, Maran and Nizamani, Fahmida (2015) Small and Medium Enterprises: Asymmetric Information and Critical Factors Affecting Bank Financing. [Citation Index Journal]

Marneni, Narahari and Pendyala, Rajashekhar (2015) Natural Convective Coutte Flow in a Vertical Parallel Plate Microchannel. [Citation Index Journal]

Marneni, Narahari and Tippa, Sowmya and Pendyala, Rajashekhar and Nayan, M Yunus (2015) Ramped Temperature Effect on Unsteady MHD Natural Convection Flow Past an Infinite Inclined Plate in the Presence of Radiation, Heat Source and Chemical Reaction. In: Recent Advances in Applied and Theoretical Mechanics. WSEAS. ISBN 978-1-61804-304-7

Marzuki, N.A. and Zarain, N. (2015) AEDESTROYER a proposed robotic solution to control dengue in Malaysia. [["eprint_typename_conference\_item" not defined]]

Mastor, F.A. and Aziz, I.A. and Haron, N.S. and Jaafar, J. and Ismail, N.N. and Mehat, M. (2015) Pre-flood warning system based on user mobility. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17905-17913.

Mat Desa, W.L.H. and Kamaruddin, S. and Nawawi, M.K.M. and Zulkepli, J. (2015) Evaluation on absenteeism effect in production line at aircraft composite manufacturer. Jurnal Teknologi, 77 (5). pp. 63-67.

Mazlan, M.A.A.A. and Md Khir, M.H. and Mohamad Saad, M.N. (2015) Implementation of wireless sensor network in oil and gas specifically for personnel positioning application. [["eprint_typename_conference\_item" not defined]]

Mazlan, Mohammad Amir Firdaus (2015) Fast pyrolysis of hardwood residues using a fixed bed drop-type pyrolyzer. [Citation Index Journal]

Mei, I.L.S. and Ismail, I. and Shafquet, A. and Abdullah, B. (2015) Real-time monitoring and measurement of wax deposition in pipelines via non-invasive electrical capacitance tomography. Measurement Science and Technology, 27 (2).

Memon, A.H. and Bin Ibrahim, T. and Nallagowden, P. (2015) Design optimization of a pico linear permanent magnet generator with novel shaped magnet for wave energy conversion using finite element analysis. International Journal of Applied Engineering Research, 10 (18). pp. 39058-39065.

Memon, A.H. and Bin Ibrahim, T. and Nallagowden, P. (2015) Design optimization of a pico linear permanent magnet generator with novel shaped magnet for wave energy conversion using finite element analysis. International Journal of Applied Engineering Research, 10 (18). pp. 39058-39065.

Memon, A.H. and Bin Ibrahim, T. and Nallagowden, P. (2015) Design optimization of linear permanent magnet generator for wave energy conversion. [["eprint_typename_conference\_item" not defined]]

Memon, A.H. and Bin Ibrahim, T. and Nallagowden, P. (2015) Design optimization of linear permanent magnet generator for wave energy conversion. [["eprint_typename_conference\_item" not defined]]

Memon, M.A. and Salleh, R. and Baharom, M.N.R. (2015) Person-organization fit and turnover intention: Conceptualizing the moderating role of social exchange ideology. Advanced Science Letters, 21 (6). pp. 2127-2129.

Meng, Goh Chuan and Shahzad, Aamir and Mohamad Saad, Mohamad Naufal and Malik, Aamir Saeed and Meriaudeau, Fabrice (2015) Prototype design for wearable veins localization system using near infrared imaging technique. In: 2015 IEEE 11th International Colloquium on Signal Processing & Its Applications (CSPA).

Mod Zaid, Hayyiratul Fatimah and Chong, Fai Kait and Abdul Mutalib, Mohamed Ibrahim (2015) Photooxidative-Extractive Deep Desulfurization of Diesel using Cu-Fe/TiO2 and Eutectic Ionic Liquid. [Citation Index Journal]

Mohamad, N. and Kamaruddin, S. and Purwanto, U.S. (2015) The effects of organizational innovation on operational performance and other types of innovation. [["eprint_typename_conference\_item" not defined]]

Mohamed, N.M. and Khatani, M. and Hamid, N.H. and Sahmer, A.Z. and Zaine, S.N.A. (2015) Performance analysis of dye solar cell with additional TiO2 layer under different light Intensities. Materials Science in Semiconductor Processing, 38 . pp. 381-386.

Mohamed, Shakir and Qidwai, Uvais and Malik, Aamir Saeed and Kamel , Nidal (2015) Electroencephalography Simulation Hardware for Realistic Seizure, Preseizure and Normal Mode Signal Generation. Journal of Medical Imaging and Health Informatics .

Mohammad Azam, Siti Fatimah and Drieberg , Micheal and Lai, Fong Woon (2015) Ant Colony Optimization of Feeder Bus Routes for Electric Train Service. In: IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE) 2015.

Mohammad Rozali, N.E. and Wan Alwi, S.R. and Manan, Z.A. and Klemeš, J.J. (2015) Peak-off-peak load shifting for hybrid power systems based on Power Pinch Analysis. Energy, 90 . pp. 128-136.

Mohammadat, M.T. and Ali, N.B.Z. and Hussin, F.A. and Zwolinski, M. (2015) Resistive open faults detectability analysis and implications for testing low power nanometric ICs. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 23 (3). pp. 580-583.

Mohammadat, Mohamed Tag Elsir and Zain Ali , Noohul Basheer and Hussin, Fawnizu Azmadi and Zwolinski, Mark (2015) Resistive Open Faults Detectability Analysis and Implications for Testing Low Power Nanometric ICs. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 23 (3). pp. 580-583. ISSN 1063-8210

Mohammed, B.S. and Ahmed Nezri, A.N.S.B. (2015) Durability aspects and bond strength of rubbercrete containing nano silica. [["eprint_typename_conference\_item" not defined]]

Mohammed, B.S. and Ahmed Nezri, A.N.S.B. (2015) Durability aspects and bond strength of rubbercrete containing nano silica. [["eprint_typename_conference\_item" not defined]]

Mohammed, B.S. and Ibrahim, R. and Perumal, N. and Rama Rao, K.S. (2015) Power flow control of a multi-bus/three-feeder distribution system using generalized unified power quality conditioner. Journal of Electrical Engineering and Technology, 10 (1). pp. 8-17.

Mohammed, B.S. and Ibrahim, R.B. (2015) Convertible active power filter: A new approach to compensate for current quality problems in the DS. [["eprint_typename_conference\_item" not defined]]

Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusup, S. and Alshareef, I. and Chin, S.A. (2015) Comprehensive characterization of Napier grass as a feedstock for thermochemical conversion. Energies, 8 (5). pp. 3403-3417.

Mohd, M.S. and Karsiti, M.N. and Mohd, M.S. (2015) Effect of phase advance on the brushless dc motor torque speed respond. [["eprint_typename_conference\_item" not defined]]

Mokhtar, A.A. and Saari, N. and Ismail, M.C. (2015) Assessment of insulated piping system inspection using logistic regression. Lecture Notes in Mechanical Engineering, 19 . pp. 265-277.

Moniruzzaman, M. and Mahmood, H. and Kamiya, N. and Yusup, S. and Goto, M. (2015) Activity and stability of enzyme immobilized with ionic liquid based polymer materials. Journal of Engineering Science and Technology, 10 . pp. 60-69.

Montasir, O.A. and Yenduri, A. and Kurian, V.J. (2015) Effect of mooring line configurations on the dynamic responses of truss spar platforms. Ocean Engineering, 96 . pp. 161-172.

Muhammad, M. and Nasir, M. and Mokhtar, A.A. and Hussin, H. (2015) Continuous life cycle cost model for repairable system. Lecture Notes in Mechanical Engineering, 19 . pp. 279-287.

Muhammad, N. and Gao, Y. and Khan, M.I. and Khan, Z. and Rahim, A. and Iqbal, F. and khan , A.S. and Iqbal, J. (2015) Effect of ionic liquid on thermo-physical properties of bamboo biomass. Wood Science and Technology, 49 (5). pp. 897-913.

Muhammad, N. and Man, Z. and Mutalib, M.I.A. and Bustam, M.A. and Wilfred, C.D. and Khan, A.S. and Ullah, Z. and Gonfa, G. and Nasrullah, A. (2015) Dissolution and Separation of Wood Biopolymers Using Ionic Liquids. ChemBioEng Reviews, 2 (4). pp. 257-278.

Muhammad, N.A. and Chin, J.F. and Kamarrudin, S. and Chik, M.A. and Prakash, J. (2015) Fundamental simulation studies of CONWIP in front-end wafer fabrication. Journal of Industrial and Production Engineering, 32 (4). pp. 232-246.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2015) Thermal conductivity of powder injection molded carbon nanotube-reinforced copper-matrix composites. International Journal of Powder Metallurgy, 51 (1). pp. 57-66.

Mukhtar, A. and Xia, L. and Tang, T.B. (2015) Vehicle Detection Techniques for Collision Avoidance Systems: A Review. IEEE Transactions on Intelligent Transportation Systems, 16 (5). pp. 2318-2338.

Mumtaz, W. and Malik, A.S. and Ali, S.S.A. and Yasin, M.A.M. and Amin, H. (2015) Detrended fluctuation analysis for major depressive disorder. [["eprint_typename_conference\_item" not defined]]

Mumtaz, Wajid and Malik, Aamir Saeed and Azhar Ali, Syed Saad and Mohd Yasin, Mohd Azhar and Amin, Hafeez Ullah (2015) Detrended fluctuation analysis for major depressive disorder. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Mumtaz, Wajid and Malik, Aamir Saeed and Azhar Ali, Syed Saad and Yasin Mohd, Mohd Azhar (2015) A Study to Investigate Different EEG Reference Choices in Diagnosing Major Depressive Disorder. In: Neural Information Processing. Springer International Publishing.

Mumtaz, Wajid and Malik, Aamir Saeed and Mohd Yasin, Mohd Azhar and Xia, Likun (2015) Review on EEG and ERP predictive biomarkers for major depressive disorder. Biomedical Signal Processing and Control .

Muniandy, M. and Sulaiman, S. (2015) An exploratory study on blind users� mental model in computer accessibility. Lecture Notes in Electrical Engineering, 315 . pp. 925-938.

Munir, S. and Siddiqui, M.I. and Heikal, M. and Abdul Aziz, A.R. and de Sercey, G. (2015) Identification of dominant structures and their flow dynamics in the turbulent two-phase flow using POD technique. Journal of Mechanical Science and Technology, 29 (11). pp. 4701-4710.

Musa, M.S. and Nallagownden, P. and Chiu, K.W. and Sarwar, M.B. (2015) Design and development of intelligent adaptive tunnel lighting system. [["eprint_typename_conference\_item" not defined]]

Musa, M.S. and Nallagownden, P. and Chiu, K.W. and Sarwar, M.B. (2015) Design and development of intelligent adaptive tunnel lighting system. [["eprint_typename_conference\_item" not defined]]

Musah, A.A. and Ghazali, Z. and Isha, A.S.N. (2015) Role of temperament and communication in conflict management styles: A conceptual approach. Advanced Science Letters, 21 (6). pp. 1776-1780.

Mustafa, A.T. and Al-Kayiem, H.H. and Gilani, S.I.U. (2015) Investigation and evaluation of the solar air collector model to support the solar vortex engine. ARPN Journal of Engineering and Applied Sciences, 10 (12). pp. 5309-5319.

Muthuvalu, M.S. and Asirvadam, V.S. and Mashadov, G. (2015) Performance analysis of Arithmetic Mean method in determining peak junction temperature of semiconductor device. Ain Shams Engineering Journal, 6 (4). pp. 1203-1210.

N

Nagrath, Vineet and Morel, Olivier and Malik, Aamir Saeed and Mohamad, Naufal Mohamad (2015) Dynamic electronic institutions in agent oriented cloud robotic systems. SpringerPlus .

Nagrath, Vineet and Morel, Olivier and Malik, Aamir Saeed and Mohamad Saad, Mohamad Naufal and Meriaudeau, Fabrice (2015) Peer to peer trade in HTM5 meta model for agent oriented cloud robotic systems. Peer-to-Peer Networking and Applications .

Nallagownden, P. and Alhaj, H.M.M. and Sarwar, M.B. (2015) Optimizing the efficiency of Oscillating Water Column (OWC) wave energy converter using genetic algorithm. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10218-10227.

Naqvi, S.A.A. and Badruddin, N. and Jatoi, M.A. and Malik, A.S. and Hazabbah, W. and Abdullah, B. (2015) EEG based time and frequency dynamics analysis of visually induced motion sickness (VIMS). Australasian Physical and Engineering Sciences in Medicine, 38 (4). pp. 721-729.

Naqvi, Syed Ali Arsalan and Badruddin , Nasreen and Jatoi, Munsif Ali and Malik, Aamir Saeed and Hazabbah, Wan and Abdullah, Baharudin (2015) EEG based time and frequency dynamics analysis of visually induced motion sickness (VIMS). Australasian Physical and Engineering Sciences in Medicine . ISSN 1879-5447

Nasif, M.S. (2015) Effect of utilizing different permeable material in air-to-air fixed plate energy recovery heat exchangeron energy saving. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10153-10158.

Nasir, R. and Mukhtar, H. and Man, Z. and Dutta, B.K. and Shaharun, M.S. and Abu Bakar, M.Z. (2015) Mixed matrix membrane performance enhancement using alkanolamine solution. Journal of Membrane Science, 483 . pp. 84-93.

Nasir, R. and Mukhtar, H. and Man, Z. and Shaharun, M.S. and Abu Bakar, M.Z. (2015) Effect of fixed carbon molecular sieve (CMS) loading and various di-ethanolamine (DEA) concentrations on the performance of a mixed matrix membrane for CO<inf>2</inf>/CH<inf>4</inf> separation. RSC Advances, 5 (75). pp. 60814-60822.

Nawaz, F. and Jeoti, V. (2015) A novel anti-collision protocol for optimization of remote sensing in dense reader network. Lecture Notes in Electrical Engineering, 315 . pp. 213-222.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Shakir, I. and Ullah, S. and Sagir, M. and Pervaiz, M. (2015) Surface morphology and mechanical strength of AISI M2 tool steel treated in abnormal glow region of plasma. Surface Engineering and Applied Electrochemistry, 51 (1). pp. 58-64.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Zilati, K. (2015) Visual characterization of heated water spray jet breakup induced by full cone spray nozzles. Journal of Applied Mechanics and Technical Physics, 56 (2). pp. 211-219.

Naz, M.Y. and Sulaiman, S.A. and Man, Z. and Ariwahjoedi, B. (2015) Effect of the water spray stress on swirling fluidized bed height. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10192-10195.

Naz, M.Y. and Sulaiman, S.A. and Man, Z. and Ariwahjoedi, B. (2015) Effect of the water spray stress on swirling fluidized bed height. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10192-10195.

Nazri, N.I.A.M. and Awang Rambli, D.R. and Doolan, D.C. (2015) Interaction experiences in mobile augmented reality. Jurnal Teknologi, 75 (3). pp. 75-80.

Nguyen, T.H. and Ismail, I. and Saad, N.B. and Faisal, A. and Irfan, M. (2015) A practical approach of control of real time nonlinear process plant using Multiple Model Predictive Control. [["eprint_typename_conference\_item" not defined]]

Nik Yusoff, N.H. and Mamat, O. and Isa, M.C. (2015) A review of electrodeposition techniques and variables for production of nickel-cobalt / alumina (Ni-Co/Al2O3) composite coatings. Defence S and T Technical Bulletin, 8 (2). pp. 129-140.

Nizamani, F. and Marimuthu, M. (2015) Small and medium enterprises: Asymmetric information and critical factors affecting bank financing. Advanced Science Letters, 21 (5). pp. 1615-1618.

Nor, M.A.M. and Al-Kayiem, H.H. and Lemma, T.A. (2015) Numerical analysis of cocurrent conical and cylindrical axial cyclone separators. [["eprint_typename_conference\_item" not defined]]

Nor, N.I.M. and Romlie, M.F. and Kannan, R. (2015) Comparison of tubular and planar design of a micro linear generator for vibration energy harvesting. [["eprint_typename_conference\_item" not defined]]

Nor, N.I.M. and Romlie, M.F. and Kannan, R. (2015) Comparison of tubular and planar design of a micro linear generator for vibration energy harvesting. [["eprint_typename_conference\_item" not defined]]

Norbert Simon, Michael Crozier, Mairead Roiste, Abdul Ghani Rafe, . (2015) Time series assessment on landslide occurrences in an area undergoing development. Time series assessment on landslide occurrences in an area undergoing development .

Nordin, A. and Majid, M.A.A. (2015) Performance assessment of Heat Recovery Steam Generator at district Cooling plant. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10196-10199.

Norizan, S.N.I.B. and Aziz, I.B.A. and Haron, N.S. and Jaafar, J. and Ismail, N.N. and Mehat, M. (2015) Roadside worker detection and alert system using RFID. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17899-17904.

Nuruddin, M.F. and Memon, F.A. and Demie, S. and Shafiq, N. (2015) Influence of water-to-geopolymer solids ratio and curing time on the properties of self-compacting geopolymer concrete. Malaysian Construction Research Journal, 13 (2). pp. 29-38.

Nuruddin, M.F. and Ullah Khan, S. and Shafiq, N. and Ayub, T. (2015) Strength prediction models for PVA fiber-reinforced high-strength concrete. Journal of Materials in Civil Engineering, 27 (12).

Nurudin, M.F. and Memon, F.A. (2015) Properties of self-compacting geopolymer concrete. Materials Science Forum, 803 . pp. 99-109.

O

Ofei, T.N. and Alhemyari, S.A. (2015) Computational fluid dynamics simulation of the effect of drill pipe rotation on cuttings transport in horizontal wellbores using a Newtonian fluid. [["eprint_typename_conference\_item" not defined]]

Ofei, T.N. and Alhemyari, S.A. (2015) Computational fluid dynamics simulation of the effect of drill pipe rotation on cuttings transport in horizontal wellbores using a Newtonian fluid. [["eprint_typename_conference\_item" not defined]]

Ofei, T.N. and Irawan, S. and Pao, W. (2015) Cuttings-liquid frictional pressure loss model for horizontal narrow annular flow with rotating drillpipe. [["eprint_typename_conference\_item" not defined]]

Okitsu, J. and Khamis, M.F.I. and Zakaria, N. and Naono, K. and Haruna, A.A. (2015) Toward an architecture for integrated gas district cooling with data center control to reduce CO2 emission. Sustainable Computing: Informatics and Systems, 6 . pp. 39-47.

Ooi, B.L. and Gilbert, J.M. and Aziz, A.R.A. (2015) Switching damping for a frequency-tunable electromagnetic energy harvester. Sensors and Actuators, A: Physical, 234 . pp. 311-320.

Osei, H. and Al-Kayiem, H.H. and Hashim, F.M. (2015) Numerical studies on the separation performance of liquid-liquid hydrocyclone for higher water-cut wells. [["eprint_typename_conference\_item" not defined]]

Osman Ali, Amal Seralkhatem and Asirvadam , Vijanth Sagayan and Malik, Aamir Saeed and Eltoukhy , Mohamed Meselhy and Abd Aziz, Azrina (2015) Age-Invariant Face Recognition Using Triangle Geometric Features. International Journal of Pattern Recognition and Artificial Intelligence . ISSN 2180014

Othman, M. and Yusnenti, F.M.Y. and Mohdyusri, I. (2015) Siliconizing process of mild steel substrate by using Tronoh Silica Sand (TSS): An experimental investigation. [["eprint_typename_conference\_item" not defined]]

P

Park, D.K. and Kim, D.K. and Park, C.-H. and Park, D.H. and Jang, B.S. and Kim, B.J. and Paik, J.K. (2015) On the crashworthiness of steel-plated structures in an arctic environment: An experimental and numerical study. Journal of Offshore Mechanics and Arctic Engineering, 137 (5).

Patil, S.S. and Karuppanan, S. and Atanasovska, I. (2015) Contact stress evaluation of involute gear pairs, including the effects of friction and helix angle. Journal of Tribology, 137 (4).

Pendyala, Rajashekhar and Chong, Jia Ling and Ilyas, Suhaib Umer (2015) CFD Analysis of Heat Transfer Performance in a Car Radiator with Nanofluids as Coolants. [Citation Index Journal]

Pendyala, Rajashekhar and Wong, Yean Sang and Ilyas, Suhaib Umer (2015) CFD Simulations of Natural Convection Heat Transfer in Enclosures with Varying Aspect Ratios. [Citation Index Journal]

Pendyala, Rajashekhar and Yong, Jenn and Azman, Irsyad Ahnaf and Ilyas, Suhaib Umer (2015) CFD Simulations of Transient Fuel Gases Mixing, Leakage and Flammability in Air. [Citation Index Journal]

Potty, N.S. and Sirajuddin, M. (2015) Study on empirical seismic codal guidelines for masonry buildings in Kollam, Kerala, India. Journal of Engineering Science and Technology, 10 (7). pp. 865-877.

Purnomo, E.W. and Ghosh, D.P. (2015) The maximum amplitude weighted integrated energy spectra: A new gauge in seismic thin-bed interpretation. Journal of Engineering and Technological Sciences, 47 (1). pp. 20-35.

Q

Qayyum, A. and Malik, A.S. and Bin Muhammad Saad, M.N. (2015) Comparison of digital elevation models based on high resolution satellite stereo imagery. [["eprint_typename_conference\_item" not defined]]

Qayyum, A. and Malik, A.S. and Saad, M.N.B.M. and Iqbal, M. (2015) Segmentation of satellite imagery based on pulse-coupled neural network. [["eprint_typename_conference\_item" not defined]]

Qayyum, Abdul and Malik, Aamir Saeed and Mohamad Saad, Mohamad Naufal (2015) Comparison of Digital Elevation Models Based on High Resolution Satellite Stereo Imagery. In: 2015 International Conference on Space Science and Communication (IconSpace), Langkawi, Malaysia.

Qayyum, Abdul and Malik, Aamir Saeed and Mohamad Saad, Mohamad Naufal (2015) Segmentation of satellite imagery based on pulse-coupled neural network. In: 2015 International Conference on Space Science and Communication (IconSpace), Langkawi, Malaysia.

Qayyum, Abdul and Malik, Aamir Saeed and Mohamad Saad, Mohamad Naufal and Ahmad, Rana Fayyaz and Taun Abdullah, Taun Ab Rashid (2015) Identification of power poles based on satellite stereo images using graph-cut algorithm. In: 2015 IEEE 11th International Colloquium on Signal Processing & Its Applications (CSPA).

Qayyum, Abdul and Malik, Aamir Saeed and Mohamad Saad, Mohamad Naufal and Iqbal, Mahboob and Abdullah, Mohd Faris and Rasheed, Waqas and Tuan Abdullah, Tuan Ab Rashid and Ramli, A Q (2015) Vegetation height estimation near power transmission poles via satellite stereo images using 3D depth estimation algorithms. In: 36th International Symposium on Remote Sensing of Environment, Berlin, Germany.

R

Rabih, A.A.S. and Khir, M.H.M. and Ahmed, A.Y. and Ahmed, M.G.A. and Dennis, J.O. (2015) Characterization of CMOS-MEMS device for acetone vapor detection in exhaled breath. [["eprint_typename_conference\_item" not defined]]

Rahim, M.H.B.A. and Zamin, N. (2015) AUTISTHERAPIBOT: Autonomous robotic autism therapists assistant for autistic children. [["eprint_typename_conference\_item" not defined]]

Rahman, H.U. and Ibrahim, M.Y. and Ahmad, A.C. (2015) The impact of soft regulations on boardroom diversity and shareholders' confidence in Malaysia. [["eprint_typename_conference\_item" not defined]]

Rahman, I. and Vasant, P. and Singh, B.S.M. and Abdullah-Al-Wadud, M. (2015) Swarm intelligence-based optimization for PHEV charging stations. IGI Global, pp. 374-405.

Rahman, I. and Vasant, P. and Singh, B.S.M. and Abdullah-Al-Wadud, M. (2015) Technical challenges of plug-in hybrid electric vehicles deployment in smart electric grid. Contemporary Engineering Sciences, 8 (21-24). pp. 1119-1126.

Rahman, I. and Vasant, P.M. and Mahinder Singh, B.S. and Abdullah-Al-Wadud, M. (2015) Swarm Intelligence-Based Smart Energy Allocation Strategy for Charging Stations of Plug-In Hybrid Electric Vehicles. Mathematical Problems in Engineering, 2015 .

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) Hybrid Swarm Intelligence-Based Optimization for Charging Plug-in Hybrid Electric Vehicle. In: 7th Asian Conference, ACIIDS 2015, Bali, Indonesia., March 23-25, 2015, Bali, Indonesia..

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) On the performance of accelerated particle swarm optimization for charging plug-in hybrid electric vehicles. [Citation Index Journal]

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) Prospect of Swarm Intelligence (SI) Techniques for the Charging Optimization of Electric Vehicles. [Non-Citation Index Journal]

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) Swarm Intelligence-Based Optimization for PHEV Charging Stations. In: Handbook of Research on Swarm Intelligence in Engineering. IGI Global, pp. 374-405. ISBN 978-1-4666-8291-7

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) Swarm Intelligence-Based Smart Energy Allocation Strategy for Charging Stations of Plug-In Hybrid Electric Vehicles. [Citation Index Journal]

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) Swarm intelligence based State-of-Charge optimization for charging Plug-in Hybrid Electric Vehicles. In: 5th International Conference on Energy and Sustainability, 16 - 18 December, 2014, Putrajaya, Malaysia..

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2015) Technical Challenges of Plug-in Hybrid Electric Vehicles Deployment in Smart Electric Grid. [Citation Index Journal]

Rahman, Z.H.A. and Khir, M.H.Md. and Burhanudin, Z.A. (2015) CMOS-MEMS thermoelectric generator for low power medical devices. [["eprint_typename_conference\_item" not defined]]

Rahmiati, T. and Azizli, K.A. and Man, Z. and Ismail, L. and Nuruddin, M.F. (2015) Effect of solid/liquid ratio during curing time fly ash based geopolymer on mechanical property. Materials Science Forum, 803 . pp. 120-124.

Rasheed, W. and Tang, T.B. and Bin Hamid, N.H. (2015) Default mode functional connectivity estimation and visualization framework for MEG data. [["eprint_typename_conference\_item" not defined]]

Rauf, M. and Yahya, N. and Nyamasvisva, T.E. and Ansari, A. and Shafie, A. and Nahar, N. (2015) Prediction of double stacking hydrocarbon using Marine Controlled Source Electromagnetic method. [["eprint_typename_conference\_item" not defined]]

Razali, R. and Shafie, A. and Hassan, A.R. and Khan, H. (2015) A multivariate study of energy consumption, urbanisation, trade openness and economic growth in Malaysia. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10275-10280.

Razali, R. and Shafie, A. and Hassan, A.R. and Khan, H. (2015) A multivariate study of energy consumption, urbanisation, trade openness and economic growth in Malaysia. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10275-10280.

Rehan, M. and Hasbullah, H. and Rehan, M. and Chughtai, O. and Rehan, W. (2015) Zoomout HELLO: A novel 1-hop broadcast scheme to improve network QoS for VANET on highways. Advances in Intelligent Systems and Computing, 306 . pp. 75-84.

Rehman, M.Z.U. and Baharudin, Z. and Zakariya, M.A. and Khir, M.H.M. and Jilani, M.T. (2015) RF MEMS based tunable bowtie shaped substrate integrated waveguide filter. Radioengineering, 24 (1). pp. 25-31.

Roslan, N.S. and Izhar, L.I. and Saad, M.N.M. and Sivapalan, S. (2015) Innovations for teaching and learning: An exploration of the potential of EEG for individual and group learning activities. [["eprint_typename_conference\_item" not defined]]

Roslan, N.S. and Izhar, L.I. and Saad, M.N.M. and Sivapalan, S. (2015) Innovations for teaching and learning: An exploration of the potential of EEG for individual and group learning activities. [["eprint_typename_conference\_item" not defined]]

Rosli, N.S. and Ibrahim, R. and Ismail, I. (2015) Soft redundant instrument for metering station in gas transportation system. [["eprint_typename_conference\_item" not defined]]

Roslim, M.K. and Hassan, S. and Baheta, A.T. (2015) Experimental investigation on heat transfer enhancement by using porous twisted plate as an insert in a fitted tube. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10164-10168.

Rubab, S. and Hassan, M.F. and Mahmood, A.K. and Shah, S.N.M. (2015) Forecasting volunteer grid workload using Holt-Winters' method. [["eprint_typename_conference\_item" not defined]]

S

S.Y.M Alashloo, Deva Ghosh, YasirBashir, W. I. Wan Yusoff, . (2015) A comparision on initial-value ray tracing and fast marching eikonal solver for VTI traveltime computing. A comparision on initial-value ray tracing and fast marching eikonal solver for VTI traveltime computing .

SN Fathiyah Jamaludin, AH Abdul Latiff, DP Ghosh, . (2015) Structural Balancing vs Horizon Flattening on Seismic Data: Example from Extensional Tectonic Setting. Structural Balancing vs Horizon Flattening on Seismic Data: Example from Extensional Tectonic Setting .

SN Fathiyah Jamaludin, Abdul Halim Abdul Latiff, Askury A. Kadir, . (2015) Interpretation of Gas Seepages on Seismic Data: Example from Malaysian Offshore. Interpretation of Gas Seepages on Seismic Data: Example from Malaysian Offshore .

Sabir, O. and Ya, T.M.Y.S.T. (2015) Numerical simulation of fluid flow in three dimensional domain based on two stage pressure-velocity correction method. [["eprint_typename_conference\_item" not defined]]

Sabir, O. and Ya, T.M.Y.S.T. (2015) Numerical simulation of fluid flow in three dimensional domain based on two stage pressure-velocity correction method. [["eprint_typename_conference\_item" not defined]]

Saeed, M.O. and Azizli, K. and Isa, M.H. and Bashir, M.J.K. (2015) Application of CCD in RSM to obtain optimize treatment of POME using Fenton oxidation process. Journal of Water Process Engineering, 8 . e7-e16.

Saini, S. and Rambli, D.R.B.A. and Sulaiman, S.B. and Zakaria, M.N.B. and Tomi, A.B. (2015) Particle swarm optimization based articulated human pose tracking using enhanced silhouette extraction. [["eprint_typename_conference\_item" not defined]]

Salihi, I.U. and Kutty, S.R.M. and Isa, M.H. and Olisa, E. and Aminu, N. (2015) Adsorption of copper using modified and unmodified sugarcane bagasse. International Journal of Applied Engineering Research, 10 (19). pp. 40434-40438.

Salihi, I.U. and Kutty, S.R.M. and Isa, M.H. and Olisa, E. and Aminu, N. (2015) Adsorption of copper using modified and unmodified sugarcane bagasse. International Journal of Applied Engineering Research, 10 (19). pp. 40434-40438.

Sarwar, M.B. and Nallagownden, P. and Baharudin, Z. and Muthuvalu, M.S. (2015) Simulation and development of ZigBee based wireless stakeout system controlled by PC. [["eprint_typename_conference\_item" not defined]]

Sarwar, M.B. and Nallagownden, P. and Baharudin, Z. and Muthuvalu, M.S. (2015) Simulation and development of ZigBee based wireless stakeout system controlled by PC. [["eprint_typename_conference\_item" not defined]]

Sasmito, A.P. and Kurnia, J.C. and Birgersson, E. and Mujumdar, A.S. (2015) Computational evaluation of thermal management strategies in an underground mine. Applied Thermal Engineering, 90 . pp. 1144-1150.

Satti, I.A. and Ghosh, D. and Yusoff, W.I.W. and Hoesni, M.J. (2015) Origin of overpressure in a field in the southwestern Malay basin. SPE Drilling and Completion, 30 (3). pp. 198-211.

Satti, Iftikhar Ahmed and Ghosh, Deva Prasad and Wan Yusoff , Wan Ismail (2015) 3D predrill pore pressure prediction using basin modeling approach in a field of Malay Basin. asian journal of earth sciences .

Savita, K.S. and Dominic, P.D.D. and Ratnam, K.A. (2015) The role of green IT and IT for green within green supply Chain management: A preliminary finding from ISO14001 companies in Malaysia. Lecture Notes in Electrical Engineering, 315 . pp. 883-894.

Serai, M.H. and Johl, S.K. and Marimuthu, M. (2015) Conceptual framework of sustainable corporate entrepreneurship. [["eprint_typename_conference\_item" not defined]]

Serai, Majid Hussain and Satirenjit , Kaur Johl and Marimuthu, Maran (2015) Conceptual Framework of Sustainable Corporate Entrepreneurship. [Citation Index Journal]

Sethi, Muhammad Athar Javed and Hussin , Fawnizu Azmadi and Hamid, Nor Hisham (2015) Survey of Network on Chip Architectures. Science International, 27 (5). pp. 4133-4144. ISSN 1013-5316

Shad, Muhammad Kashif and Lai, Fong Woon (2015) A Conceptual Framework for Enterprise Risk Management performance measure through Economic Value Added. [Citation Index Journal]

Shad, Muhammad Kashif and Lai, Fong Woon (2015) A Conceptual Framework for Enterprise Risk Management Performance Measure through Economic Value Added. [Non-Citation Index Journal]

Shad, Muhammad Kashif and Lai, Fong Woon (2015) Developing an Enterprise Risk Management Value Enhancing Model Manifested through Economic Value Added. In: APPLIED COMPUTER and APPLIED COMPUTATIONAL SCIENCE (ACACOS '15), Malaysia.

Shad, Muhammad Kashif and Lai, Fong Woon (2015) Enterprise Risk Management and Firm Performance Validated Through Economic Value Added Factors. INTERNATIONAL JOURNAL OF ECONOMICS AND STATISTICS .

Shafiq, N. and Nurrudin, M.F. and Gardezi, S.S.S. and Kamaruzzaman, A.B. (2015) Carbon footprint assessment of a typical low rise office building in Malaysia using building information modelling (BIM). International Journal of Sustainable Building Technology and Urban Development, 6 (3). pp. 157-172.

Shafiq, N. and Nuruddin, M.F. and Khan, S.U. and Ayub, T. (2015) Calcined kaolin as cement replacing material and its use in high strength concrete. Construction and Building Materials, 81 . pp. 313-323.

Shafquet, A. and Ismail, I. and Japper-Jaafar, A. and Sulaiman, S.A. and Chala, G.T. (2015) Estimation of gas void formation in statically cooled waxy crude oil using online capacitance measurement. International Journal of Multiphase Flow, 75 . pp. 257-266.

Shah, S.N. and Lethesh, K.C. and Mutalib, M.I.A. and Pilus, R.B.M. (2015) Evaluation of thermophysical properties of imidazolium-based phenolate ionic liquids. Industrial and Engineering Chemistry Research, 54 (14). pp. 3697-3705.

Shaheen, A.-U.-R. and Hussin, F.A. and Hamid, N.H. (2015) Delay design-for-testability for functional RTL circuits. [["eprint_typename_conference\_item" not defined]]

Shaheen, A.-U.-R. and Hussin, F.A. and Hamid, N.H. (2015) Delay design-for-testability for functional RTL circuits. [["eprint_typename_conference\_item" not defined]]

Shaheen, Ateeq-Ur-Rehman and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2015) Delay Design-for-Testability for Functional RTL Circuits. In: 7th International conference on Information Technology and Electrical Engineering (ICITEE 2015), 29-30th October 2015, Chiang Mai, Thailand.

Shahzad, A. and Goh, C.M. and Saad, N.M. and Walter, N. and Malik, A.S. and Meriaudeau, F. (2015) Subcutaneous veins detection and backprojection method using Frangi vesselness filter. [["eprint_typename_conference\_item" not defined]]

Shahzad, A. and Tyng, C.M. and Saad, N.M. and Walter, N. and Malik, A.S. and Meriaudeau, F. (2015) Subcutaneous veins depth estimation method using Monte Carlo simulations. [["eprint_typename_conference\_item" not defined]]

Shahzad, Aamir and Tyng, Chai Meei and Mohamad Saad, Mohamad Naufal and Nicolas, Walter and Malik, Aamir Saeed and Meriaudeau, Fabrice (2015) Subcutaneous veins depth estimation method using Monte Carlo simulations. In: 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Pisa.

Shahzad, Aamir and goh, CM and Mohamad Saad, Mohamad Naufal and Nicolas, Walter and Malik, Aamir Saeed and Meriaudeau, Fabrice (2015) Subcutaneous veins detection and backprojection method using Frangi vesselness filter. In: 2015 IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE).

Shairi, N.A. and Ahmad, B.H. and Wong, P.W. and Zakaria, Z. (2015) High isolation and absorptive feature in single pole double throw (SPDT) discrete switch design using switchable matched ring resonator. Advanced Science Letters, 21 (1). pp. 93-97.

Shakir, Mohamed and Qidwai, Uvais and Malik, Aamir Saeed and Kamel, Nidal (2015) EEG Simulation Hardware for Realistic Seizure, Preseizure and Normal Mode Signal Generation. [Citation Index Journal]

Shamim, A. and Ghazali, Z. (2015) Customer participation in value co-creation: Can it develop corporate brand experience? Advanced Science Letters, 21 (5). pp. 1197-1201.

Shamim, A. and Ghazali, Z. and Abdul Jamak, A.B.S. (2015) Extrinsic experiential value as an antecedent of customer citizenship behavior. [["eprint_typename_conference\_item" not defined]]

Shamsuddin, N.M. and Yusup, S. and Ibrahim, W.A. and Bokhari, A. and Chuah, L.F. (2015) Oil extraction from Calophyllum inophyllum L. via Soxhlet extraction: Optimization using response surface methodology (RSM). [["eprint_typename_conference\_item" not defined]]

Shannan, N.M. and Yahaya, N.Z. and Singha, B. and Salam, Z. and Ahmed, K.Y. (2015) Two-diode model for parameters extraction of photovoltaic module under temperature variation. IEICE Electronics Express, 12 (19).

Shehzad, A. and Bashir, M.J.K. and Sethupathi, S. and Lim, J.-W. (2015) An overview of heavily polluted landfill leachate treatment using food waste as an alternative and renewable source of activated carbon. Process Safety and Environmental Protection, 98 . pp. 309-318.

Sheikh, M.A. and Ali, N.B.Z. and Hamid, N.H. and Hussin, F.A. and Shukla, V. (2015) On enhancing the reliability of digital microfluidic biochips (DMFB) through electrode cells health classification. [["eprint_typename_conference\_item" not defined]]

Sheikh, Madiha and Zain Ali, Noohul Basheer and Hamid, Nor Hisham and Hussin, Fawnizu Azmadi and Shukla, Vineeta (2015) On Enhancing The Reliability of Digital Microfluidic Biochips (DMFB) Through Electrode Cells Health Classification. In: 2015 Asian Symposium on Quality Electronic Design (ASQED), 4-5 Augist 2015, Kuala Lumpur, Malaysia.

Shoaib, M. and Hisham, N. and Basheer, N. and Tariq, M. (2015) Frequency analysis of electrostatic cantilever-based MEMS sensor. [["eprint_typename_conference\_item" not defined]]

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. (2015) Optimum temperature on structural growth of multiwalled carbon nanotubes with low activation energy. Diamond and Related Materials, 58 . pp. 129-138.

Singh, K.S.M.J. and Elamvazuthi, I. and Shaari, K.Z.K. and Lima, F.V. (2015) PID tuning control strategy using Cuckoo Search algorithm. [["eprint_typename_conference\_item" not defined]]

Singh, K.S.M.J. and Elamvazuthi, I. and Shaari, K.Z.K. and Lima, F.V. (2015) PID tuning control strategy using Cuckoo Search algorithm. [["eprint_typename_conference\_item" not defined]]

Slaiman, I. and Tang, T.B. and Hamid, N.H. (2015) Pulse Amplitude and Delay Modulation: Design and performance analysis. Optics Communications, 345 . pp. 52-56.

Soh, B.P. and Pao, W. and Al-Kayiem, H.H. (2015) Numerical analyses for improved hydrodynamics of deep water torpedo anchor. [["eprint_typename_conference\_item" not defined]]

Sohail, A. and Dominic, P.D.D. (2015) Business process improvement: A process warehouse based resource management method. [["eprint_typename_conference\_item" not defined]]

Soleimani, H. and Abbas, Z. and Yahya, N. and Soleimani, H. and Sabet, M. and Oechsner, A. and Politis, C. (2015) An optimisation approch to determine the electromagnetic properties of lanthanum iron garnet filled PVDF-polymer composite at microwave frequencies. Digest Journal of Nanomaterials and Biostructures, 10 (3). pp. 895-900.

Soon, J.N.P. and Wan, W.S. and Yuen, P.K. and Heng, L.E. and Theam, L.J. and Wei, L.S. (2015) BareBone cloud IaaS: Revitalization disruptive technology. [["eprint_typename_conference\_item" not defined]]

Sovuthy, C. and Wen, W.P. (2015) Compact, quasi-elliptic dual-band bandpass filter with improved isolation. [["eprint_typename_conference\_item" not defined]]

Subhan, F. and Ahmed, S. and Ashraf, K. and Imran, M. (2015) Extended Gradient RSSI Predictor and Filter for Signal Prediction and Filtering in Communication Holes. Wireless Personal Communications, 83 (1). pp. 297-314.

Subhani, A.R. and Malik, A.S. and Kamel, N. and Saad, N. and Nandagopal, D.N. (2015) Experimental evidence for the effects of the Demand-Control model on the cognitive arousal: An EEG based study. [["eprint_typename_conference\_item" not defined]]

Subhani, Ahmad Rauf and Malik, Aamir Saeed and Kamel, Nidal and Mohamad Saad, Mohamad Naufal and Nandagopal, D (Nanda) (2015) Experimental evidence for the effects of the Demand-Control model on the cognitive arousal: An EEG based study. In: 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Sugathan, S.K. and Dominic, D.D. and Ramayah, T. and Ratnam, K.A. (2015) The associating factors and outcomes of green supply chain management implementation � from the technological and non-technological perspectives. Advances in Intelligent Systems and Computing, 353 . pp. 491-501.

Sugumaran, M. and Suppiah, R.R. (2015) Study on the effect of silica fume with low calcium geopolymer properties for oil well cementing. [["eprint_typename_conference\_item" not defined]]

Sugumaran, M. and Suppiah, R.R. (2015) Study on the effect of silica fume with low calcium geopolymer properties for oil well cementing. [["eprint_typename_conference\_item" not defined]]

Suhaimi, Hassan and Baheta, Aklilu Tesfamichael (2015) Experimental investigation on heat transfer enhancement by using porous twisted plate as an inserts in a fitted tube. ARPN Journal of Engineering and Applied Sciences, 10 (21). ISSN 1819-6608

Sulaiman, S. and Rambli, D.R.A. and Zuki, F.S.M. (2015) Putting the tactile feedback to Quranic verses and tajweed rules. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17996-18003.

Sulaiman, S.A. and Balamohan, S. and Moni, M.N.Z. and Atnaw, S.M. and Mohamed, A.O. (2015) Feasibility study of gasification of oil palm fronds. Journal of Mechanical Engineering and Sciences, 9 . pp. 1744-1757.

Sulaiman, S.A. and Mat, M.N.H. and Guangul, F.M. and Bou-Rabee, M.A. (2015) Real-time study on the effect of dust accumulation on performance of solar PV panels in Malaysia. [["eprint_typename_conference\_item" not defined]]

Suman, Shipra and Hussin, Fawnizu Azmadi and Nicolas, Walter and Malik, Aamir Saeed and Goh, Khean Lee and Hilmi, Ida and Ho, Shaiw Hooi (2015) Optimum Colour Space Selection for Ulcerated Regions using Statistical Analysis and Classification of Ulcerated Frames from WCE Video Footage. In: 22nd International Conference on Neural Information Processing (ICONIP2015), November 9-12, 2015, Istanbul, Turkey.

Suman, Shipra and Nicolas, Walter and Hussin, Fawnizu Azmadi and Malik, Aamir Saeed and Ho, Shiaw Hooi and Goh, Khean Lee and Hilmi, Ida (2015) Optimum Colour Space Selection for Ulcerated Regions Using Statistical Analysis and Classification of Ulcerated Frames from WCE Video Footage. In: Neural Information Processing. Springer International Publishing.

Sumra, I.A. and Hasbullah, H.B. and AbManan, J.-L.B. (2015) Attacks on security goals (confidentiality, integrity, availability) in VANET: A survey. Advances in Intelligent Systems and Computing, 306 . pp. 51-61.

Sutri, N.Y. and Dennis, J.O. and Khir, M.H.M. and Ahmed, A.Y. and Mian, M.U. (2015) A monolithic, low-noise, capacitive readout interface circuit for CMOS-MEMS resonator-based gravimetric chemical gas sensors. [["eprint_typename_conference\_item" not defined]]

Sutri, N.Y. and Dennis, J.O. and Khir, M.H.Md. and Mian, M.U. (2015) Noise minimization techniques for modulator demodulator circuits used for chopper stabilization in CMOS-MEMS sensor applications. [["eprint_typename_conference\_item" not defined]]

Syaifuddin Mohd, M. and Rashid, A. and Syafiq Mohd, M. (2015) Investigation of mechanical field weakening of axial flux permanent magnet motor. [["eprint_typename_conference\_item" not defined]]

T

Taha, O.M.A. and Bahrom, M.B. and Taha, O.Y. and Aris, M.S. (2015) Experimental study on two way shape memory effect training procedure for NiTiNOL shape memory alloy. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7847-7851.

Taha Jilani, M. and Wong, P.W. and Zakariya, M.A. and Lee, Y.C. (2015) Dielectric characterization of meat using enhanced coupled ring-resonator. [["eprint_typename_conference\_item" not defined]]

Talla, G. and Sahoo, D.K. and Gangopadhyay, S. and Biswas, C.K. (2015) Modeling and multi-objective optimization of powder mixed electric discharge machining process of aluminum/alumina metal matrix composite. Engineering Science and Technology, an International Journal, 18 (3). pp. 369-373.

Tan, L.S. and Shariff, A.M. and Lau, K.K. and Bustam, M.A. (2015) Impact of high pressure on high concentration carbon dioxide capture from natural gas by monoethanolamine/N-methyl-2-pyrrolidone solvent in absorption packed column. International Journal of Greenhouse Gas Control, 34 . pp. 25-30.

Teh, H.M. and Venugopal, V. (2015) Optimization of hydraulic efficiency of a free surface semicircular breakwater using wave screens. [["eprint_typename_conference\_item" not defined]]

Teo, W. and Hing, K.L.M. (2015) An experimental investigation into the shear interaction between internal stirrups and external CFRP systems of RC beams. [["eprint_typename_conference\_item" not defined]]

Teo, W. and Hing, K.L.M. (2015) An experimental investigation into the shear interaction between internal stirrups and external CFRP systems of RC beams. [["eprint_typename_conference\_item" not defined]]

Teo, W. and Hor, Y. (2015) Suitability of optimized truss model to predict the FRP contribution to shear resistance for externally bonded FRP strengthened RC beams without internal stirrups. Composites Part B: Engineering, 80 . pp. 385-398.

Trinh, T.H. and KuShaari, K. (2015) Modeling base to design controlled release fertilizer matching with nitrogen uptake of rice plant. [["eprint_typename_conference\_item" not defined]]

Trinh, T.H. and KuShaari, K. (2015) Modeling base to design controlled release fertilizer matching with nitrogen uptake of rice plant. [["eprint_typename_conference\_item" not defined]]

Trinh, T.H. and Kushaari, K. and Basit, A. (2015) Modeling the Release of Nitrogen from Controlled-Release Fertilizer with Imperfect Coating in Soils and Water. Industrial and Engineering Chemistry Research, 54 (26). pp. 6724-6733.

Trinh, T.H. and Kushaari, K. and Shuib, A.S. and Ismail, L. and Azeem, B. (2015) Modelling the release of nitrogen from controlled release fertiliser: Constant and decay release. Biosystems Engineering, 130 . pp. 34-42.

U

Ud Din, I. and Shaharun, M.S. and Subbarao, D. and Naeem, A. (2015) Synthesis, characterization and activity pattern of carbon nanofibers based copper/zirconia catalysts for carbon dioxide hydrogenation to methanol: Influence of calcination temperature. Journal of Power Sources, 274 . pp. 619-628.

Ullah, B. and Ovinis, M. and Baharom, M.B. and Javaid, M.Y. and Izhar, S.S. (2015) Underwater gliders control strategies: A review. [["eprint_typename_conference\_item" not defined]]

Ullah, H. and Islam, S. and Dennis, L.C.C. and Abdelhameed, T.N. and Khan, I. and Fiza, M. (2015) Approximate solution of two-dimensional nonlinear wave equation by optimal homotopy asymptotic method. Mathematical Problems in Engineering, 2015 .

Ullah, R. and Jaafar, J. and Said, A.B.M. (2015) Purify noisy data from annotated images using Montylingua and control redundant term. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 18193-18199.

Ullah, R. and Jaafar, J. and Said, A.B.M. (2015) Semantic Annotation Model for objects Classification. [["eprint_typename_conference\_item" not defined]]

Ullah, R. and Jaafar, J. and Said, A.B.M. (2015) Semantic Annotation Model for objects Classification. [["eprint_typename_conference\_item" not defined]]

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Khamidi, M.F. and Farhan, S.A. and Gardezi, S.S.S. (2015) 4D BIM application in AEC industry: Impact on integrated project delivery. Research Journal of Applied Sciences, Engineering and Technology, 10 (5). pp. 547-552.

Ur Rehman, M.Z. and Baharudin, Z. and Zakariya, M.A. and Khir, M.H.M. and Jilani, M.T. (2015) RF MEMS based tunable bandpass filter using QMSIW resonator. Optoelectronics and Advanced Materials, Rapid Communications, 9 (11-12). pp. 1498-1502.

Usman Dalhatu, D.B. and Abdullah, A. and Ibrahim, Y.M. and Abideen, A.A. (2015) Awareness level of north-west zone of Nigeria retail customers towards Islamic banking. Advanced Science Letters, 21 (5). pp. 1460-1463.

V

Vasant, P. (2015) Hybrid evolutionary optimization algorithms: A case study in manufacturing industry. IGI Global, pp. 1072-1107.

Vasant, P. (2015) Hybrid evolutionary optimization algorithms: A case study in manufacturing industry. IGI Global, pp. 1072-1107.

Vo Nguyen, Phu Huan and Harahap, Indra Sati Hamonangan (2015) Simulation of Tsunami Wave Generated by Submarine Slide: Generation, Propagation, Run-Up and Impact. [Non-Citation Index Journal]

W

Waris, M. and Liew, M.S. and Faris, M. and Idrus, A. (2015) An exploratory study on enablers and barriers for onsite mechanisation in the Malaysian construction industry. Malaysian Construction Research Journal, 16 (1). pp. 15-30.

Woldemichael, D.E. and Abdul Rani, A.M. and Lemma, T.A. and Altaf, K. (2015) Numerical simulation of rock cutting using 2D AUTODYN. [["eprint_typename_conference\_item" not defined]]

Woldemichael, D.E. and Hashim, F.M. (2015) Web-based conceptual design support system. [["eprint_typename_conference\_item" not defined]]

Wong, M.K. and Bustam, M.A. and Shariff, A.M. (2015) Chemical speciation of CO2 absorption in aqueous monoethanolamine investigated by in situ Raman spectroscopy. International Journal of Greenhouse Gas Control, 39 . pp. 139-147.

Y

Ya, H.H. and El-Sobky, H. (2015) An experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading. Jurnal Teknologi, 74 (10). pp. 111-119.

Yahya, Norashikin and Kamel , Nidal and Malik, Aamir Saeed (2015) Subspace-based technique for speckle noise reduction in ultrasound images. [Citation Index Journal]

Yaqub, A. and Isa, M.H. and Ajab, H. (2015) Electrochemical degradation of polycyclic aromatic hydrocarbons in synthetic solution and produced water using a Ti/SnO2-Sb2O5-RuO2 anode. Journal of Environmental Engineering (United States), 141 (4).

Yasir Bashir, Deva Ghosh, Chow Weng Sum, . (2015) Detection of Fault and Fracture Using Seismic Diffraction and Behaviour of Diffraction Hyperbola with Velocity and Time. Detection of Fault and Fracture Using Seismic Diffraction and Behaviour of Diffraction Hyperbola with Velocity and Time .

Yasir Bashir, Deva Ghosh, S.Y.M Alashloo, Chow Weng Sum, . (2015) Effect of frequency and Migration Aperture on Seismic Diffraction Imaging. Effect of frequency and Migration Aperture on Seismic Diffraction Imaging .

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. (2015) Identification of slow drift motions of a truss spar platform using parametric Volterra model. Ocean Engineering, 109 . pp. 654-668.

Ye, K.Z. and Kyaw, H.A. and Portnov, E.M. and Bain, A.M. and Vasant, P. (2015) The efficiency of detecting the failures and troubleshooting while applying technical diagnostics for multi-computer systems. Archives of Control Sciences, 25 (1). pp. 87-107.

Yousif, A.A. and Sulaiman, S.A. and Nasif, M.S. (2015) Experimental study on laminar flame speeds and Markstein length of propane air mixtures at atmospheric conditions. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2188-2198.

Yu, S.Y. and Choi, H.S. and Lee, S.K. and Park, K.-S. and Kim, D.K. (2015) Nonlinear soil parameter effects on dynamic embedment of offshore pipeline on soft clay. International Journal of Naval Architecture and Ocean Engineering, 7 (2). pp. 227-243.

Yusof, Z.A.M. and Ahmed, I. and Khan, M.S. and Hussain, S.A. and Hussain, A. and Mutalib, I.B.A. and Balkhair, K.S. and Albeirutty, M.H. (2015) Thermal Evaluation of Diesel/Hydrogen Peroxide Fuel Blend. Chemical Engineering and Technology, 38 (12). pp. 2170-2180.

Yussiff, A.-S. and Wan Ahmad, W.F. and Mustapha, E.E. (2015) Exploring students perceptions of teaching, social, cognitive presences, effectiveness for teamwork and learning outcomes. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17749-17757.

Yusup, S. and Yiin, C.L. and Tan, C.J. and Abdullah, B. (2015) Determination of Optimum Condition for the Production of Rice Husk-Derived Bio-oil by Slow Pyrolysis Process. Wiley Blackwell, pp. 329-340.

Z

Zafar, Raheel and Malik, Aamir Saeed and Amin, Hafeez Ullah and Kamel , Nidal and Dass, Sarat Chandra (2015) Discrimination of Brain States Using Wavelet and Power Spectral Density. In: Neural Information Processing. Springer International Publishing.

Zafar, Raheel and Malik, Aamir Saeed and Kamel , Nidal and Dass, Sarat Chandra and Abdullah, Jafri Malin and Reza, Faruque and Abdul Karim, Ahmad Helmy (2015) Decoding of visual information from human brain activity_A review of fMRI and EEG studies. Journal of Integrative Neuroscience .

Zahari, A. and Jaafar, J. (2015) A novel approach of hidden markov model for time series forecasting. [["eprint_typename_conference\_item" not defined]]

Zainal A., E.Z. and Ibrahim, A.A. and Aziz, A.R.A. and Zulkifli, S.A. (2015) Effect of motoring voltage on compression ratio of a free-piston linear generator engine. Journal of Mechanical Engineering and Sciences, 8 . pp. 1393-1400.

Zakaria, M.S. and Hassan, S. and Nor, M.F.M. (2015) Calorific value of the sewage sludge in the thermal dryer. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10245-10248.

Zakaria, M.S. and Hassan, S. and Nor, M.F.M. (2015) Calorific value of the sewage sludge in the thermal dryer. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10245-10248.

Zaman, N. and Low, T.J. and Alghamdi, T. (2015) Enhancing routing energy efficiency of Wireless Sensor Networks. [["eprint_typename_conference\_item" not defined]]

Zamri, N.H. and Ismail, L. and Abdul Rahim, R.H. and Siyal, A.A. and Man, Z. and Azizli, K.A. (2015) Kinetics of geopolymer solidification study using texture analyzer. Materials Science Forum, 803 . pp. 75-80.

Zarif, S. and Faye, I. and Rohaya, D. (2015) Image completion based on statistical texture analysis. Journal of Electronic Imaging, 24 (1).

Ziao, C.Z. and Kamaruddin, S. (2015) Numerical assessment on makespan minimization by adopting NEH heuristics in permutation flow shop. [["eprint_typename_conference\_item" not defined]]

Zuhar Zahir Tuan Harith, Khairul Arifin Mohd Noh, . (2015) ISSUES AND CHALLENGES IN INTERPRETING 2D RESISTIVITY IMAGE. ISSUES AND CHALLENGES IN INTERPRETING 2D RESISTIVITY IMAGE .

Zulkarnain, N.F. and Ibrahim, T. and Hashim, H.Z. (2015) Design and modelling of electrical machine for ceiling fan system. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10174-10183.

Zulkifli, S.A. and Mohd, S. and Jamali, A.J. and Kurniawan, Y. and Saad, N. and Aziz, A.R.A. (2015) Implementation of energy management system for a split-parallel hybrid electric vehicle with in-wheel motors. [["eprint_typename_conference\_item" not defined]]

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2015) Operation and control of split-parallel, through-theroad hybrid electric vehicle with in-wheel motors. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2793-2808.

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2015) Operation, power flow, system architecture and control challenges of split-parallel through-the-road hybrid electric vehicle. [["eprint_typename_conference\_item" not defined]]

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2015) Split-parallel through-the-road hybrid electric vehicle: Operation, power flow and control modes. [["eprint_typename_conference\_item" not defined]]

Zulkifli, S.A. and Syaifuddin Mohd, M. and Maharun, M. and Bakar, N.S.A. and Idris, S. and Samsudin, S.H. and Firmansyah, F. and Adz, J.J. and Misbahulmunir, M. and Abidin, E.Z.Z. and Syafiq Mohd, M. and Saad, N. and Aziz, A.R.A. (2015) Design and development of split-parallel through-the road retrofit hybrid electric vehicle with in-wheel motors. [["eprint_typename_conference\_item" not defined]]

This list was generated on Thu Oct 28 14:13:30 2021 MYT.