Logo

Items where Year is 2021

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 479.

Article

Abbasi, A.Z. and Rehman, U. and Hussain, A. and Ting, D.H. and Islam, J.U. (2021) The impact of advertising value of in-game pop-up ads in online gaming on gamers� inspiration: An empirical investigation. Telematics and Informatics, 62 .

Abbasi, A.Z. and Shah, M.U. and Rehman, U. and Hlavacs, H. and Ting, D.H. and Nisar, S. (2021) The Role of Personality Factors Influencing Consumer Video Game Engagement in Young Adults: A Study on Generic Games. IEEE Access, 9 . pp. 17392-17410.

Abd Manan, T.S.B. and Khan, T. and Wan Mohtar, W.H.M. and Beddu, S. and Qazi, S. and Sheikh Khozani, Z. and Mohd Kamal, N.L. and Sarwono, A. and Jusoh, H. and Yavari, S. and Mustafa, S.F.Z. and Hanafiah, Z. and Mohd Zaid, H.F. and Machmudah, A. and Isa, M.H. and Ahmad, A. and Ghanim, A.A.J. (2021) Ecological and health risk assessment of polycyclic aromatic hydrocarbons (PAHs) in Sungai Perak, Malaysia. Journal of Cleaner Production, 294 .

Abd Razak, S.N. and Guillaumat, L. and Shafiq, N. (2021) Effect of fire flame exposure on basalt and carbon fiber-reinforced concrete. Lecture Notes in Civil Engineering, 132 . pp. 573-579.

Abdelmohimen, M.A.H. and Algarni, S. and Almutairi, K. and Ahmed, G.M.S. and Irshad, K. and Irfan, S.A. (2021) Improving Heat Transfer of Plate-Fin Heat Sinks Using through Rod Configurations. Journal of Thermal Science and Engineering Applications, 13 (1).

Abdul Kadir, E. and Listia Rosa, S. and Syukur, A. and Othman, M. and Daud, H. (2021) Forest fire spreading and carbon concentration identification in tropical region Indonesia. Alexandria Engineering Journal .

Abdullah, M.S. and Alaloul, W.S. and Liew, M.S. and Musarat, M.A. (2021) Delay and cost overrun of palm oil refinery construction projects: Artificial neural network (ann) model. Lecture Notes in Civil Engineering, 132 . pp. 580-589.

Abdulrahman, S. and Hainin, M.R. and Idham Mohd Satar, M.K. and Hassan, N.A. and Usman, A. (2021) Mechanical performance and global warming potential of unaged warm cup lump modified asphalt. Journal of Cleaner Production, 297 .

Abimbola, T.O. and Wan Yusof, K. and Takaijudin, H. and Abdurrasheed, A.S. and Al-Qadami, E.H.H. and Ishola, S.A. and Owoseni, T.A. and Akilu, S. (2021) A concise review of major desalination techniques: Features and limitations. Lecture Notes in Civil Engineering, 132 . pp. 154-162.

Abro, G.E.M. and Mathur, N. and Zulkifli, S.A.B.M. and Kakar, M.G.K.G.K. and Pasupuleti, N.S. and Asirvadam, V.S.S. (2021) Designing an IoT-based disinfectant gate for reducing the reproductive coefficient of the novel coronavirus COVID-19 in Malaysia. World Journal of Engineering .

Abu Aisheh, Y.I. and Tayeh, B.A. and Alaloul, W.S. and Almalki, A. (2021) Health and safety improvement in construction projects: a lean construction approach. International Journal of Occupational Safety and Ergonomics .

Adam, M.R. and Othman, M.H.D. and Sheikh Abdul Kadir, S.H. and Puteh, M.H. and Jamalludin, M.R. and Md Nordin, N.A.H. and Ab Rani, M.A. and Mustafa, A. and Rahman, M.A. and Jaafar, J. (2021) Fabrication, performance evaluation, and optimisation of adsorptive ammonia removal using hollow fibre ceramic membrane: Response surface methodology approach. Microporous and Mesoporous Materials, 316 .

Adibah, N.A. and Azella, S.N. and Shukur, M.F.A. (2021) Synthesis of Ti3C2 mxene through in situ hf and direct hf etching procedures as electrolyte fillers in dye-sensitized solar cell. Materials Science Forum, 1023 M . pp. 15-20.

Affam, A.C. and Chung, W.C. and Lau, P.L. and Johnson, O.A. and Seong, K.C. and Baloo, L. and Peng, B.W.L. and Xınru, F. (2021) Design expert application for optimization of ag/agbr/tio2 visible light photocatalyst preparation. Lecture Notes in Civil Engineering, 132 . pp. 93-102.

Afolabi, F. and Mahmood, S.M. and Johnson, J. and Peters, O.A. (2021) Synthesis and Characterization of a Cellulose-Based Polymeric Surfactant Towards Applications in Enhanced Oil Recovery. Lecture Notes in Mechanical Engineering . pp. 210-219.

Ahmad, A. and Sutanto, M.H. and Al-Bared, M.A.M. and Harahap, I.S.H. and Abad, S.V.A.N.K. and Khan, M.A. (2021) Physio-Chemical Properties, Consolidation, and Stabilization of Tropical Peat Soil Using Traditional Soil Additives � A State of the Art Literature Review. KSCE Journal of Civil Engineering .

Ahmad, F. and Amjad, W.A. and Mehmood, F. and Jan, M.T. and Dennis, J.O. and Khir, M.H.B.M. (2021) Design, modelling and testing of CMOS-MEMS switch. Microsystem Technologies, 27 (7). pp. 2543-2552.

Ahmad, M.A. and Letchumanan, A. and Samsuri, S. and Mazli, W.N.A. and Md Saad, J. (2021) Parametric study of glycerol and contaminants removal from biodiesel through solvent-aided crystallization. Bioresources and Bioprocessing, 8 (1).

Ahmad, R.K. and Sulaiman, S.A. and Dol, S.S. and Umar, H.A. (2021) The potential of coconut shells through pyrolysis technology in nigeria. Green Energy and Technology . pp. 151-175.

Ahmad, S. and Shafiq, N. and Iqbal, H.W. and Ahmad, R.Z. and Abbas, Z. and Rehman, A.-U. and Ali, M. (2021) Effect of slag on chloride resistance of concrete. Lecture Notes in Civil Engineering, 132 . pp. 365-374.

Ahmad, T. and Iqbal, J. and Bustam, M.A. and Irfan, M. and Anwaar Asghar, H.M. (2021) A critical review on phytosynthesis of gold nanoparticles: Issues, challenges and future perspectives. Journal of Cleaner Production, 309 .

Ahmad, W.F.W. and Harnaini, A.F.A. (2021) SpaceScience App: Development of a Mobile Application for School Children. Lecture Notes on Data Engineering and Communications Technologies, 72 . pp. 1177-1186.

Ahmed, R. and Nazir, A. and Mahadzir, S. and Shorfuzzaman, M. and Islam, J. (2021) Niching grey wolf optimizer for multimodal optimization problems. Applied Sciences (Switzerland), 11 (11).

Aina, Y.A. and Parvez, I.M. and Balogun, A.-L. and Adam, E. (2021) Urban Heat Island Effects and Mitigation Strategies in Saudi Arabian Cities. Advances in 21st Century Human Settlements . pp. 235-248.

Akbar, A. and Majid, M.A.B.A. and Mokhtar, A.A. (2021) Life cycle costing of thermal energy storage system using CAPEX and OPEX. Journal of Mechanical Science and Technology, 35 (7). pp. 3223-3229.

Akhter, J. and Gilani, S.I. and Al-Kayiem, H.H. and Ali, M. (2021) Performance Evaluation of a Modified Compound Parabolic Concentrating Collector with Varying Concentration Ratio. Heat Transfer Engineering, 42 (13-14). pp. 1117-1131.

Akilu, S. and Padmanabhan, E. and Sun, Z. (2021) A review of transport mechanisms and models for unconventional tight shale gas reservoir systems. International Journal of Heat and Mass Transfer, 175 .

Al Kaisy, G.M.J. and Mutalib, M.I.A. and Rao, T.V.V.L.N. and Senatore, A. (2021) Tribological performance of low viscosity halogen-free ammonium based protic ionic liquids with carboxylate anions as neat lubricants. Tribology International, 160 .

Al-Amin, M. and Abdul-Rani, A.M. and Ahmed, R. and Rao, T.V.V.L.N. (2021) Multiple-objective optimization of hydroxyapatite-added EDM technique for processing of 316L-steel. Materials and Manufacturing Processes, 36 (10). pp. 1134-1145.

Al-Amin, M. and Abdul-Rani, A.M. and Ahmed, R. and Shahid, M.U. and Zohura, F.T. and Rani, M.D.B.A. (2021) Multi-objective optimization of process variables for MWCNT-added electro-discharge machining of 316L steel. International Journal of Advanced Manufacturing Technology, 115 (1-2). pp. 179-198.

Al-Atesh, E. and Rahmawati, Y. and Abdullah Zawawi, N.A.W. (2021) Sustainability criteria for green building material selection in the malaysian construction industry. Lecture Notes in Civil Engineering, 132 . pp. 693-700.

Al-Atesh, E.A. and Rahmawati, Y. and Zawawi, N.A.W.A. and Utomo, C. (2021) A decision-making model for supporting selection of green building materials. International Journal of Construction Management .

Al-Bared, M.A.M. and Mustaffa, Z. and Armaghani, D.J. and Marto, A. and Yunus, N.Z.M. and Hasanipanah, M. (2021) Application of hybrid intelligent systems in predicting the unconfined compressive strength of clay material mixed with recycled additive. Transportation Geotechnics, 30 .

Al-Ezzi, A. and Kamel, N. and Faye, I. and Gunaseli, E. (2021) Analysis of default mode network in social anxiety disorder: Eeg resting-state effective connectivity study. Sensors, 21 (12).

Al-Ezzi, A. and Yahya, N. and Kamel, N. and Faye, I. and Alsaih, K. and Gunaseli, E. (2021) Severity Assessment of Social Anxiety Disorder using Deep Learning Models on Brain Effective Connectivity. IEEE Access .

Al-Fakih, A. and Hisbany Mohd Hashim, M. and Alyousef, R. and Mutafi, A. and Hussein Abo Sabah, S. and Tafsirojjaman, T. (2021) Cracking behavior of sea sand RC beam bonded externally with CFRP plate. Structures, 33 . pp. 1578-1589.

Al-Ghobari, M. and Muneer, A. and Fati, S.M. (2021) Location-aware personalized traveler recommender system (lapta) using collaborative filtering knn. Computers, Materials and Continua, 69 (2). pp. 1553-1570.

Al-Hiyali, M.I. and Yahya, N. and Faye, I. and Hussein, A.F. (2021) Identification of autism subtypes based on wavelet coherence of BOLD FMRI signals using convolutional neural network. Sensors, 21 (16).

Al-Jothery, H.K.M. and Albarody, T.M.B. and Megat-Yusoff, P.S.M. and Al-Shaibani, N. and Mohammed, H.G. (2021) Experimental Investigations on Microwave-Current Assisted Sintering Process and Oxidation of Graphite Die at High Temperature. International Journal of Automotive and Mechanical Engineering, 18 (2). pp. 8781-8789.

Al-Kayiem, H.H. and Ismaeel, A.A. and Baheta, A.T. and Aurybi, M.A. (2021) Performance enhancement of solar vortex power generator by Al2O3-in-black paint coating. Journal of Cleaner Production, 316 .

Al-Masgari, A.A. and Elsaadany, M. and Siddiqui, N.A. and Abdul Latiff, A.H. and Bakar, A.A. and Elkurdy, S. and Hermana, M. and Babikir, I. and Imran, Q.S. and Adeleke, T. (2021) Geomorphological geometries and high-resolution seismic sequence stratigraphy of malay basin�s fluvial succession. Applied Sciences (Switzerland), 11 (11).

Al-Masgari, A.A.-S. and Elsaadany, M. and Latiff, A.H.A. and Hermana, M. and Hamzah, U.B. and Babikir, I. and Adeleke, T. and Imran, Q.S. and Al-Bared, M.A.M. (2021) Seismic sequence stratigraphic sub-division using well logs and seismic data of Taranaki Basin, New Zealand. Applied Sciences (Switzerland), 11 (3). pp. 1-21.

Al-Masgari, A.A.-S. and Elsaadany, M. and Rahman, A.H.B.A. and Hermana, M. and Latiff, A.H.A. and Babikir, I. and Adeleke, T.O. and Imran, Q.S. and Appiah, N. (2021) A GUIDELINE FOR SEISMIC SEQUENCE STRATIGRAPHY INTERPRETATION. ARPN Journal of Engineering and Applied Sciences, 16 (2). pp. 165-183.

Al-Qadami, E.H.H. and Mustaffa, Z. and Martínez-Gomariz, E. and Yusof, K.W. and Abdurrasheed, A.S. and Shah, S.M.H. (2021) Numerical simulation to assess floating instability of small passenger vehicle under sub-critical flow. Lecture Notes in Civil Engineering, 132 . pp. 258-265.

Al-Sabaeei, A. and Napiah, M. and Sutanto, M. and Habib, N.Z. and Bala, N. and Kumalasari, I. and Ghaleb, A. (2021) Application of nano silica particles to improve high-temperature rheological performance of tyre pyrolysis oil-modified bitumen. Road Materials and Pavement Design .

Al-Sabaeei, A.M. and Napiah, M. and Sutanto, M. and Alaloul, W. and Md Yusoff, N.I. and Imran Khan, M. and Modibbo Saeed, S. (2021) Physicochemical, rheological and microstructural properties of Nano-Silica modified Bio-Asphalt. Construction and Building Materials, 297 .

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Yusoff, N.I.M. and Khairuddin, F.H. and Memon, A.M. (2021) Evaluation of the high-temperature rheological performance of tire pyrolysis oil-modified bio-asphalt. International Journal of Pavement Engineering .

Al-Wajih, R. and Abdulkadir, S.J. and Aziz, N. and Al-Tashi, Q. and Talpur, N. (2021) Hybrid Binary Grey Wolf with Harris Hawks Optimizer for Feature Selection. IEEE Access .

Al-Wajih, R. and Abdulkadir, S.J. and Aziz, N. and Al-Tashi, Q. and Talpur, N. (2021) Hybrid binary grey Wolf with Harris hawks optimizer for feature selection. IEEE Access, 9 . pp. 31662-31677.

Al-Waked, R. and Nasif, M. and Groenhout, N. and Partridge, L. (2021) Natural ventilation of residential building Atrium under fire scenario. Case Studies in Thermal Engineering, 26 .

Alaloul, W.S. and Alzubi, K.M. and Malkawi, A.B. and Al Salaheen, M. and Musarat, M.A. (2021) Productivity monitoring in building construction projects: a systematic review. Engineering, Construction and Architectural Management .

Alaloul, W.S. and Musarat, M.A. and Hui, C.J. (2021) Impact of elevated temperature on rubberized concrete: A review. Lecture Notes in Civil Engineering, 132 . pp. 421-427.

Alaloul, W.S. and Musarat, M.A. and Liew, M.S. and Qureshi, A.H. and Maqsoom, A. (2021) Investigating the impact of inflation on labour wages in Construction Industry of Malaysia. Ain Shams Engineering Journal, 12 (2). pp. 1575-1582.

Alaloul, W.S. and Qureshi, A.H. and Musarat, M.A. and Saad, S. (2021) Evolution of close-range detection and data acquisition technologies towards automation in construction progress monitoring. Journal of Building Engineering, 43 .

Alam, M.K. and Aziz, A.A. and Latif, S.A. and Aziz, A.A. (2021) Error-Control Truncated SVD Technique for In-Network Data Compression in Wireless Sensor Networks. IEEE Access, 9 . pp. 13829-13844.

Alani, S. and Zakaria, Z. and Saeidi, T. and Ahmad, A. and Imran, M.A. and Abbasi, Q.H. (2021) Microwave imaging of breast skin utilizing elliptical uwb antenna and reverse problems algorithm. Micromachines, 12 (6).

Alarifi, H. and Mohamad, H. and Nordin, N.F. and Yusoff, M. and Rafindadi, A.D. and Widjaja, B. (2021) A large-scale model of lateral pressure on a buried pipeline in medium dense sand. Applied Sciences (Switzerland), 11 (12).

Alawag, A.M.M. and Alaloul, W.S. and Liew, M.S. and Al-Bared, M.A.M. and Zawawi, N.A.W.A. and Ammad, S. (2021) The Implementation of the Industrialized Building System in the Malaysian Construction Industry�a Comprehensive Review. Lecture Notes in Mechanical Engineering . pp. 3-16.

Albaghdadi, A.M. and Baharom, M.B. and Sualiman, S.A. (2021) Balancing and Simulation of a Double Crank-Rocker Engine Model for Optimum Reduction of Shaking Forces and Shaking Moments. Mathematical Modelling of Engineering Problems, 8 (2). pp. 237-245.

Alhawari, A.R.H. and Majeed, S.F. and Saeidi, T. and Mumtaz, S. and Alghamdi, H. and Hindi, A.T. and Almawgani, A.H.M. and Imran, M.A. and Abbasi, Q.H. (2021) Compact elliptical uwb antenna for underwater wireless communications. Micromachines, 12 (4).

Ali, A. and Ilyas, S.U. and Danish, M. and Abdulrahman, A. and Maqsood, K. and Ahmed, A. and Murshid, G. and Rubaiee, S. and Alsaady, M. and Mahfouz, A.B. and Hanbazazah, A.S. (2021) Multi-objective optimization of thermophysical properties of f�Al2O3 nano-dispersions in heat transfer oil. SN Applied Sciences, 3 (2).

Ali, E.M. and Yahaya, N.Z. and Saraereh, O.A. and Assaf, A.H.A. and Alqasem, B.H. and Iqbal, S. and Ibrahim, O. and Patel, A.V. (2021) Power conversion using analytical model of cockcroft�walton voltage multiplier rectenna. Electronics (Switzerland), 10 (8).

Ali, R.F. and Dominic, P.D.D. and Ali, S.E.A. and Rehman, M. and Sohail, A. (2021) Information security behavior and information security policy compliance: a systematic literature review for identifying the transformation process from noncompliance to compliance. Applied Sciences (Switzerland), 11 (8).

Ali, S. and Ahmad, F. and Yusoff, P.S.M.M. and Muhamad, N. and Oñate, E. and Raza, M.R. and Malik, K. (2021) A review of graphene reinforced Cu matrix composites for thermal management of smart electronics. Composites Part A: Applied Science and Manufacturing, 144 .

Ali, S.M. and Sovuthy, C. and Noghanian, S. and Ali, Z. and Abbasi, Q.H. and Imran, M.A. and Saeidi, T. and Socheatra, S. (2021) Design and evaluation of a flexible dual-band meander line monopole antenna for on-and off-body healthcare applications. Micromachines, 12 (5).

Alkawsi, G.A. and Ali, N. and Mustafa, A.S. and Baashar, Y. and Alhussian, H. and Alkahtani, A. and Tiong, S.K. and Ekanayake, J. (2021) A hybrid SEM-neural network method for identifying acceptance factors of the smart meters in Malaysia: Challenges perspective. Alexandria Engineering Journal, 60 (1). pp. 227-240.

Almahbashi, N.M.Y. and Kutty, S.R.M. and Ayoub, M. and Noor, A. and Salihi, I.U. and Al-Nini, A. and Jagaba, A.H. and Aldhawi, B.N.S. and Ghaleb, A.A.S. (2021) Optimization of Preparation Conditions of Sewage sludge based Activated Carbon. Ain Shams Engineering Journal, 12 (2). pp. 1175-1182.

Alqushaibi, A. and Abdulkadir, S.J. and Rais, H.M. and Al-Tashi, Q. and Ragab, M.G. and Alhussian, H. (2021) Enhanced weight-optimized recurrent neural networks based on sine cosine algorithm for wave height prediction. Journal of Marine Science and Engineering, 9 (5).

Alraeeini, A.S. and Nikbakht, E. and Ismail, M.C. (2021) Square Steel Tube Impressed Current Corrosion Rate in Term of Linear Polarization Resistance (LPR) Method. Lecture Notes in Civil Engineering, 139 LN . pp. 123-130.

Alsubal, S. and Liew, M.S. and Lim, E.S. and Harahap, I.S.H. and Nasser, A.M.M. (2021) The future of wind power in malaysia: A review. Lecture Notes in Civil Engineering, 132 . pp. 844-851.

Alvan, S. and Ramli, M.I. and Yatmar, H. and Hustim, M. and Anas, R. (2021) The influence of socio-demographic and activity-travel participation variables on mode choice for the new railway development in south sulawesi, indonesia (Case: Makassar-parepare line). Lecture Notes in Civil Engineering, 132 . pp. 907-919.

Alyan, E. and Saad, N.M. and Kamel, N. and Rahman, M.A. (2021) Workplace design-related stress effects on prefrontal cortex connectivity and neurovascular coupling. Applied Ergonomics, 96 .

Alyan, E. and Saad, N.M. and Kamel, N. and Yusoff, M.Z. and Zakariya, M.A. and Rahman, M.A. and Guillet, C. and Merienne, F. (2021) Frontal electroencephalogram alpha asymmetry during mental stress related to workplace noise. Sensors, 21 (6). pp. 1-12.

Alyousifi, Y. and Othman, M. and Almohammedi, A.A. (2021) A Novel Stochastic Fuzzy Time Series Forecasting Model Based on a New Partition Method. IEEE Access, 9 . pp. 80236-80252.

Aman, M. and Abdulkadir, S.J. and Aziz, I.A. and Alhussian, H. and Ullah, I. (2021) KP-Rank: a semantic-based unsupervised approach for keyphrase extraction from text data. Multimedia Tools and Applications, 80 (8). pp. 12469-12506.

Ameen, A.O. and Mojeed, H.A. and Bolariwa, A.T. and Balogun, A.O. and Mabayoje, M.A. and Usman-Hamzah, F.E. and Abdulraheem, M. (2021) Application of Shuffled Frog-Leaping Algorithm for Optimal Software Project Scheduling and Staffing. Lecture Notes on Data Engineering and Communications Technologies, 72 . pp. 293-303.

Ameen Hezam Saeed, A. and Yub Harun, N. and Mahmoud Nasef, M. and Al-Fakih, A. and Abdulhakim Saeed Ghaleb, A. and Kolawole Afolabi, H. (2021) Removal of cadmium from aqueous solution by optimized rice husk biochar using response surface methodology. Ain Shams Engineering Journal .

Ammad, S. and Alaloul, W.S. and Saad, S. and Qureshi, A.H. (2021) Personal Protective Equipment (PPE) usage in Construction Projects: A Systematic Review and Smart PLS Approach. Ain Shams Engineering Journal .

Ammad, S. and Alaloul, W.S. and Saad, S. and Qureshi, A.H. (2021) Personal protective equipment (PPE) usage in construction projects: A scientometric approach. Journal of Building Engineering, 35 .

Amran, M. and Murali, G. and Khalid, N.H.A. and Fediuk, R. and Ozbakkaloglu, T. and Lee, Y.H. and Haruna, S. and Lee, Y.Y. (2021) Slag uses in making an ecofriendly and sustainable concrete: A review. Construction and Building Materials, 272 .

Anas, M.R. and Dharmowijoyo, D.B.E. and Kresnanto, N.C. (2021) Toward applying complexity perspective on travel behaviour research. Lecture Notes in Civil Engineering, 132 . pp. 1091-1097.

Anggraeni, S. and Girsang, G.C.S. and Nandiyanto, A.B.D. and Bilad, M.R. (2021) Effects of particle size and composition of sawdust/carbon from rice husk on the briquette performance. Journal of Engineering Science and Technology, 16 (3). pp. 2298-2311.

Anggraeni, S. and Hofifah, S.N. and Nandiyanto, A.B.D. and Bilad, M.R. (2021) Effects of particle size and composition of cassava peels and rice husk on the briquette performance. Journal of Engineering Science and Technology, 16 (1). pp. 527-542.

Anggraeni, S. and Putri, S.R. and Nandiyanto, A.B.D. and Bilad, M.R. (2021) Effect of particle size and tapioca starch content on performance of the rice husk and red bean skin briquettes. Journal of Engineering Science and Technology, 16 (2). pp. 1733-1745.

Anwar, A. and Mohammed, B.S. and Wahab, M.B.A. and Muthusamy, K. and Liew, M.S. (2021) Structural Quality of Graphene Oxide Nanosheets on the Basis of Defect Ratio: A Raman Study. Lecture Notes in Mechanical Engineering, 46 . pp. 423-439.

Aole, S. and Elamvazuthi, I. and Waghmare, L. and Patre, B. and Meriaudeau, F. (2021) Non-linear active disturbance rejection control for upper limb rehabilitation exoskeleton. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 235 (5). pp. 606-632.

Aquil, M.A.I. and Ishak, W.H.W. (2021) Evaluation of scratch and pre-trained convolutional neural networks for the classification of tomato plant diseases. IAES International Journal of Artificial Intelligence, 10 (2). pp. 467-475.

Arinee, M.S.N. and Idris, O. and Rahim, I.B.A. (2021) Human factor engineering in oil and gas construction works � a case study to mitigate safety risk. Lecture Notes in Civil Engineering, 132 . pp. 590-601.

Arshad, U. and Taqvi, S.A.A. and Buang, A. (2021) Modelling of the minimum ignition temperature (MIT) of corn dust using statistical analysis and artificial neural networks based on the synergistic effect of concentration and dispersion pressure. Process Safety and Environmental Protection, 147 . pp. 742-755.

Arshad, U. and Taqvi, S.A.A. and Buang, A. and Awad, A. (2021) SVM, ANN, and PSF modelling approaches for prediction of iron dust minimum ignition temperature (MIT) based on the synergistic effect of dispersion pressure and concentration. Process Safety and Environmental Protection, 152 . pp. 375-390.

Ashraf, M.S. and Hassan Shah, M.U. and Bokhari, A. and Hasan, M. (2021) Less is more: Optimising the biocementation of coastal sands by reducing influent urea through response surface method. Journal of Cleaner Production, 315 .

Aslam, B. and Maqsoom, A. and Salah Alaloul, W. and Ali Musarat, M. and Jabbar, T. and Zafar, A. (2021) Soil erosion susceptibility mapping using a GIS-based multi-criteria decision approach: Case of district Chitral, Pakistan. Ain Shams Engineering Journal, 12 (2). pp. 1637-1649.

Asnor, A.I. and Yatim, S.A.M. and Ibrahim, Z.B. and Zainuddin, N. (2021) High order block method for third order ODEs. Computers, Materials and Continua, 67 (1). pp. 1253-1267.

Aswin, M. and Nikbakht, E. and Bt Nazir, N.S. and Bt Tajuddin, N.S. and Bt Ahmad, N.A. (2021) Experimental study on structural behaviour of corbels with hybrid fibre reinforced concrete (Hyfrc). Lecture Notes in Civil Engineering, 132 . pp. 413-420.

Awad, A. and Ahmed, I. and Qadir, D. and Khan, M.S. and Idris, A. (2021) Catalytic decomposition of 2 methanol in methane over metallic catalyst by fixed-bed catalytic reactor. Energies, 14 (8).

Ayub, U.B. and Balogun, A.-L.B. (2021) Spatial analysis for sustainable campus transportation: A case study of utp. Lecture Notes in Civil Engineering, 132 . pp. 870-882.

Azhar Ali, S.E. and Rizvi, S.S.H. and Lai, F. and Faizan Ali, R. and Ali Jan, A. (2021) Predicting Delinquency on Mortgage Loans: An Exhaustive Parametric Comparison of Machine Learning Techniques. International Journal of Industrial Engineering and Management, 12 (1). pp. 1-13.

Azhari, N.A. and Mohamad, H. (2021) Greenfield settlement of kvmrt ssp line 2 in kuala lumpur limestone formation. Lecture Notes in Civil Engineering, 132 . pp. 1027-1034.

Aziz, N. and Nordin, M.J. and Abdulkadir, S.J. and Salih, M.M.M. (2021) Digital addiction: Systematic review of computer game addiction impact on adolescent physical health. Electronics (Switzerland), 10 (9).

Babar, M. and Mukhtar, A. and Mubashir, M. and Saqib, S. and Ullah, S. and Quddusi, A.H.A. and Bustam, M.A. and Show, P.L. (2021) Development of a novel switched packed bed process for cryogenic CO2 capture from natural gas. Process Safety and Environmental Protection, 147 . pp. 878-887.

Babiker, A. and Baashar, Y. and Alkahtani, A.A. and Faye, I. and Alkawsi, G. (2021) Towards detection of interest using physiological sensors. Applied Sciences (Switzerland), 11 (3). pp. 1-28.

Bakar, M.A.A. and Mustaffa, Z. and Idris, N.N. and Ben Seghier, M.E.A. (2021) Experimental program on the burst capacity of reinforced thermoplastic pipe (RTP) under impact of quasi-static lateral load. Engineering Failure Analysis, 128 .

Bakthavatchalam, B. and Habib, K. (2021) Thermoelectric air conditioners for tropical countries. Green Energy and Technology . pp. 289-307.

Bakthavatchalam, B. and Habib, K. and Bakthavatchalam, P. and Keerthana, B. and Thulasiraman, S. and Pongiannan, R.K. (2021) Stability and Thermal Conductivity Evaluation of Less Concentration Surfactant Wrapped Functionalized Graphene Dispersed in Ethylene Glycol. Lecture Notes in Mechanical Engineering . pp. 318-326.

Balogun, A.O. and Basri, S. and Mahamad, S. and Abdulkadir, S.J. and Capretz, L.F. and Imam, A.A. and Almomani, M.A. and Adeyemo, V.E. and Kumar, G. (2021) Empirical analysis of rank aggregation-based multi-filter feature selection methods in software defect prediction. Electronics (Switzerland), 10 (2). pp. 1-16.

Baloo, L. and Isa, M.H. and Sapari, N.B. and Jagaba, A.H. and Wei, L.J. and Yavari, S. and Razali, R. and Vasu, R. (2021) Adsorptive removal of methylene blue and acid orange 10 dyes from aqueous solutions using oil palm wastes-derived activated carbons. Alexandria Engineering Journal, 60 (6). pp. 5611-5629.

Baloo, L. and Kankia, M.U. and Wei, O.J. (2021) Usage of seaweed as a biocomposite material in green construction. Lecture Notes in Civil Engineering, 132 . pp. 127-138.

Band, S.S. and Taherei Ghazvinei, P. and bin Wan Yusof, K. and Hossein Ahmadi, M. and Nabipour, N. and Chau, K.-W. (2021) Evaluation of the accuracy of soft computing learning algorithms in performance prediction of tidal turbine. Energy Science and Engineering, 9 (5). pp. 633-644.

Bangash, K.A. and Kazmi, S.A.A. and Farooq, W. and Ayub, S. and Musarat, M.A. and Alaloul, W.S. and Javed, M.F. and Mosavi, A. (2021) Thickness optimization of thin-film tandem organic solar cell. Micromachines, 12 (5).

Barambu, N.U. and Bilad, M.R. and Bustam, M.A. and Kurnia, K.A. and Othman, M.H.D. and Nordin, N.A.H.M. (2021) Development of membrane material for oily wastewater treatment: A review. Ain Shams Engineering Journal, 12 (2). pp. 1361-1374.

Barham, A. and Ismail, M.S. and Hermana, M. and Padmanabhan, E. and Baashar, Y. and Sabir, O. (2021) Predicting the maturity and organic richness using artificial neural networks (ANNs): A case study of Montney Formation, NE British Columbia, Canada. Alexandria Engineering Journal, 60 (3). pp. 3253-3264.

Bashir, A. and Zulkifli, S.A. and Abd Aziz, A.R. and Abidin, E.Z.Z. (2021) Impact of combustion variance on sustainability of free-piston linear generator during steady-state generation. Energies, 14 (14).

Bashir, F. and Rehman, M. and Amin, A. and Shamim, A. and Hashmani, M. (2021) Cyberbullying Behaviour: A study of Undergraduate University Students. IEEE Access .

Belhaj, A.F. and Elraies, K.A. and Alnarabiji, M.S. and Abdul Kareem, F.A. and Shuhli, J.A. and Mahmood, S.M. and Belhaj, H. (2021) Experimental investigation, binary modelling and artificial neural network prediction of surfactant adsorption for enhanced oil recovery application. Chemical Engineering Journal, 406 .

Bhattacharjee, S. and Chakkaravarhty, D.M. and Chakkaravarty, M. and Rahim, L.B.A. and Ramadhani, A.W. (2021) A GPU Unified Platform to Secure Big Data Transportation Using an Error-Prone Elliptic Curve Cryptography. Advances in Intelligent Systems and Computing, 1174 . pp. 263-280.

Bheel, N. (2021) Basalt fibre-reinforced concrete: review of fresh and mechanical properties. Journal of Building Pathology and Rehabilitation, 6 (1).

Bheel, N. and Ibrahim, M.H.W. and Adesina, A. and Kennedy, C. and Shar, I.A. (2021) Mechanical performance of concrete incorporating wheat straw ash as partial replacement of cement. Journal of Building Pathology and Rehabilitation, 6 (1).

Bheel, N. and Sohu, S. and Awoyera, P. and Kumar, A. and Abbasi, S.A. and Olalusi, O.B. (2021) Effect of Wheat Straw Ash on Fresh and Hardened Concrete Reinforced with Jute Fiber. Advances in Civil Engineering, 2021 .

Bin Md Hafiz, M.F.U. and Mohamed Kutty, S.R.B. and Hakmi, S.N.B.S.I. (2021) Impact of treating ammonia-nitrogen contamination from chemical fertilizer plant using extended aeration activated sludge system. Lecture Notes in Civil Engineering, 132 . pp. 163-173.

Bin Meor Razali, A.M.M.F. and Awang, M. and Emamian, S.S. (2021) Preface. Lecture Notes in Civil Engineering, 139 LN .

Biswas, K. and Vasant, P. and Vintaned, J.A.G. and Watada, J. and Roy, A. and Sokkalingam, R. (2021) A Hybrid Metaheuristic Algorithm for Truss Structure Domain�s Optimization Problem. Studies in Systems, Decision and Control, 319 . pp. 21-34.

Bukhari, H. and Alaloul, W.S. and Musarat, M.A. and Akram, S. and Tabassum, I. and Altaf, M. (2021) Materializing low-cost energy-efficient residential utility through effective space design and masonry technique-a practical approach. Civil Engineering and Architecture, 9 (2). pp. 357-374.

Bukhari, H. and Thaheem, M.J. and Musarat, M.A. and Alaloul, W.S. and Altaf, M. (2021) Are Pakistani construction professionals truly happy? A benchmarking approach. Ain Shams Engineering Journal .

Bukhari, S.N. and Chong, C.C. and Setiabudi, H.D. and Cheng, Y.W. and Teh, L.P. and Jalil, A.A. (2021) Ni/Fibrous type SBA-15: Highly active and coke resistant catalyst for CO2 methanation. Chemical Engineering Science, 229 .

Buniya, M.K. and Othman, I. and Sunindijo, R.Y. and Kineber, A.F. and Alnsour, M. (2021) Elements of Safety Program Implementation in Developing Countries Construction Industries. Lecture Notes in Civil Engineering, 139 LN . pp. 85-91.

Buniya, M.K. and Othman, I. and Sunindijo, R.Y. and Kineber, A.F. and Mussi, E. and Ahmad, H. (2021) Barriers to safety program implementation in the construction industry. Ain Shams Engineering Journal, 12 (1). pp. 65-72.

Cai, Z. and Topa, A. and Djukic, L.P. and Herath, M.T. and Pearce, G.M.K. (2021) Evaluation of rigid body force in liquid sloshing problems of a partially filled tank: Traditional CFD/SPH/ALE comparative study. Ocean Engineering, 236 .

Chandrasekaran, S. and Uddin, S.A. and Wahab, M. (2021) Dynamic Analysis of Semi-submersible Under the Postulated Failure of Restraining System with Buoy. International Journal of Steel Structures, 21 (1). pp. 118-131.

Cheng, Y.W. and Chong, C.C. and Lam, M.K. and Leong, W.H. and Chuah, L.F. and Yusup, S. and Setiabudi, H.D. and Tang, Y. and Lim, J.W. (2021) Identification of microbial inhibitions and mitigation strategies towards cleaner bioconversions of palm oil mill effluent (POME): A review. Journal of Cleaner Production, 280 .

Chin, J.-C. and Fong, W.C.W. and Lee, K.-Q. and Ng, C.-Y. and Lee, K.M. and Tey, W.Y. and Kang, H.-S. (2021) Interaction of wave-induced motion and bioelectricity generation for floating microalgal biophotovoltaic system. Lecture Notes in Civil Engineering, 132 . pp. 266-273.

Chong, C.K. and Ho, E.T.W. (2021) Synthesis of 3D MRI Brain Images with Shape and Texture Generative Adversarial Deep Neural Networks. IEEE Access, 9 . pp. 64747-64760.

Chui, K.T. and Gupta, B.B. and Vasant, P. (2021) A genetic algorithm optimized RNN-LSTM model for remaining useful life prediction of turbofan engine. Electronics (Switzerland), 10 (3). pp. 1-15.

Dabbaghi, M.F. and Baharom, M.B. and Abdul Karim, Z.A. and A. Aziz, A.R. and Mohammed, S.E. and Zainal A., E.Z. (2021) Comparative evaluation of different heat transfer correlations on a single curved-cylinder spark ignition crank-rocker engine. Alexandria Engineering Journal, 60 (3). pp. 2963-2978.

Dahy, E. and Shafie, A. and Yahya, N. (2021) Electric Field Behavior in Time Domain for Semicircle Antenna in Homogeneous Multi Layered Media. Studies in Systems, Decision and Control, 319 . pp. 35-51.

Daud, H. and Mohd Aris, M.N. and Mohd Noh, K.A. and Dass, S.C. (2021) A novel methodology for hydrocarbon depth prediction in seabed logging: Gaussian process-based inverse modeling of electromagnetic data. Applied Sciences (Switzerland), 11 (4). pp. 1-20.

Deshannavar, U.B. and Marappagounder, R. (2021) Revisiting Threshold Fouling Models for Crude Oil Fouling. Heat Transfer Engineering, 42 (17). pp. 1489-1505.

Devan, P.A.M. and Hussin, F.A. and Ibrahim, R. and Bingi, K. and Khanday, F.A. (2021) A survey on the application of wirelesshart for industrial process monitoring and control. Sensors, 21 (15).

Dol, S.S. and Yong, T.H. and Chan, H.B. and Wee, S.K. and Sulaiman, S.A. (2021) Turbulence characteristics of the flexible circular cylinder agitator. Fluids, 6 (7).

Draman, N.N.C. and Karim, S.A.A. and Hashim, I. (2021) C1 Surface Interpolation Using Quartic Rational Triangular Patches. Studies in Systems, Decision and Control, 320 . pp. 89-99.

Draman, N.N.C. and Karim, S.A.A. and Hashim, I. and Ping, Y.W. (2021) Rainfall Scattered Data Interpolation Using Rational Quartic Triangular Patches. Studies in Systems, Decision and Control, 319 . pp. 1-19.

Ean, L.W. and Malek, M.A. and Mohammed, B.S. and Tang, C.-W. and Ng, C.Y. (2021) Study of c-s-h formation of cemented sediment brick. Lecture Notes in Civil Engineering, 132 . pp. 501-509.

Ejaz, F. and Pao, W. and Ali, H.M. (2021) Numerical evaluation of separation efficiency in the diverging T-junction for slug flow. International Journal of Numerical Methods for Heat and Fluid Flow .

Ejaz, F. and Pao, W. and Shakir Nasif, M. and Saieed, A. and Memon, Z.Q. and Nuruzzaman, M. (2021) A review: Evolution of branching T-junction geometry in terms of diameter ratio, to improve phase separation. Engineering Science and Technology, an International Journal, 24 (5). pp. 1211-1223.

Ejaz, M.M. and Tang, T.B. and Lu, C.-K. (2021) Vision-Based Autonomous Navigation Approach for a Tracked Robot Using Deep Reinforcement Learning. IEEE Sensors Journal, 21 (2). pp. 2230-2240.

El-Adawy, M. and Heikal, M.R. and Rashid A. Aziz, A. and Adewale Opatola, R. (2021) Stereoscopic particle image velocimetry for engine flow measurements: Principles and applications. Alexandria Engineering Journal, 60 (3). pp. 3327-3344.

Elfaki, M. and Nasif, M.S. and Muhammad, M. (2021) Effect of changing crude oil grade on slug characteristics and flow induced mechanical stresses in pipes. Applied Sciences (Switzerland), 11 (11).

Farnam, M. and bin Mukhtar, H. and bin Mohd Shariff, A. (2021) Highly permeable and selective polymeric blend mixed matrix membranes for CO2/CH4 separation. Chemical Papers .

Farnam, M. and bin Mukhtar, H. and bin Mohd Shariff, A. (2021) A Review on Glassy and Rubbery Polymeric Membranes for Natural Gas Purification. ChemBioEng Reviews, 8 (2). pp. 90-109.

Farooqi, A.S. and Yusuf, M. and Ishak, M.A.I. and Zabidi, N.A.M. and Saidur, R. and Khan, A. and Abdullah, B. (2021) Combined H2O and CO2 Reforming of CH4 Over Ca Promoted Ni/Al2O3 Catalyst: Enhancement of Ni-CaO Interactions. Lecture Notes in Mechanical Engineering . pp. 220-229.

Farooqi, B.A. and Ahmad, M.R.B. and Ali, M. (2021) Analysis of interconnected configuration for penetration of distributed generation. International Journal of Advanced Technology and Engineering Exploration, 8 (74). pp. 1-11.

Farouk Kineber, A. and Othman, I.B. and Oke, A.E. and Chileshe, N. (2021) Modelling the relationship between value management�s activities and critical success factors for sustainable buildings. Journal of Engineering, Design and Technology .

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Biomass decomposition and nanotechnology. Green Energy and Technology . pp. 49-59.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Chemisorption. Green Energy and Technology . pp. 83-93.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Fossil hydrocarbon decarbonization and nanotechnology. Green Energy and Technology . pp. 25-35.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Hydrogen from miscellaneous sources and nanotechnology. Green Energy and Technology . pp. 61-71.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Hydrogen fuel cells and nanotechnology. Green Energy and Technology . pp. 95-103.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Hydrogen future: Toward industrial applications. Green Energy and Technology . pp. 105-109.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Hydrogen sulfide decomposition and nanotechnology. Green Energy and Technology . pp. 37-47.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Introduction. Green Energy and Technology . pp. 1-11.

Farrukh, S. and Fan, X. and Mustafa, K. and Hussain, A. and Ayoub, M. and Younas, M. (2021) Physisorption. Green Energy and Technology . pp. 73-82.

Fong, K.M. and Wang, X. and Kamaruddin, S. and Ismadi, M.-Z. (2021) Investigation on universal tool wear measurement technique using image-based cross-correlation analysis. Measurement: Journal of the International Measurement Confederation, 169 .

Gad, M.A. and Nikbakht, E. and Khaled, A. and Al-Raeeini, A. (2021) Ultimate Strength of Glass Fibre Reinforced Polymer�Engineered Cementitious Composites (GFRP-ECC) Sandwich Composite Sections. Lecture Notes in Civil Engineering, 139 LN . pp. 51-61.

Gardezi, S.S.S. and Shafiq, N. (2021) Prospects of a sustainable eol-carbon footprint assessment of a tropical housing habitat. Lecture Notes in Civil Engineering, 132 . pp. 545-554.

Ghali, A.A. and Ahmad, R. and Alhussian, H. (2021) A framework for mitigating ddos and dos attacks in iot environment using hybrid approach. Electronics (Switzerland), 10 (11).

Ghazali, R. and Ali, F.H.M. and Bakar, H.A. and Ahmad, M.N. and Haron, N.S. and Omar, A.H. and Ahmadian, A. (2021) Blockchain for record-keeping and data verifying: proof of concept. Multimedia Tools and Applications .

Giwa, A. and Yusuf, A. and Balogun, H.A. and Sambudi, N.S. and Bilad, M.R. and Adeyemi, I. and Chakraborty, S. and Curcio, S. (2021) Recent advances in advanced oxidation processes for removal of contaminants from water: A comprehensive review. Process Safety and Environmental Protection, 146 . pp. 220-256.

Hamid, M.A.B. and Beh, H.G. and Oluwatobi, Y.A. and Chew, X.Y. and Ayub, S. (2021) Generation of proton-and alpha-induced nuclear cross-section data via random forest algorithm: Production of radionuclide111in. Applied Sciences (Switzerland), 11 (15).

Hanamertani, A.S. and Ahmed, S. (2021) Probing the role of associative polymer on scCO2-Foam strength and rheology enhancement in bulk and porous media for improving oil displacement efficiency. Energy, 228 .

Harim, N.A. and Karim, S.A.A. and Othman, M. and Ghaffar, A. and Nisar, K.S. (2021) Rational Quartic Spline Interpolation and Its Application in Signal Processing. Studies in Systems, Decision and Control, 320 . pp. 1-23.

Haruna, A. and Shafiq, N. and Montasir, O.A. (2021) Building information modelling application for developing sustainable building (Multi criteria decision making approach). Ain Shams Engineering Journal, 12 (1). pp. 293-302.

Hasan, R.A. and Sulaiman, S. and Ashykin, N.N. and Abdullah, M.N. and Hafeez, Y. and Ali, S.S.A. (2021) Workplace mental state monitoring during VR-based training for offshore environment. Sensors, 21 (14).

Hashim, I. and Draman, N.N.C. and Karim, S.A.A. and Yeo, W.P. and Baleanu, D. (2021) Scattered data interpolation using cubic trigonometric bézier triangular patch. Computers, Materials and Continua, 69 (1). pp. 221-236.

Hashlamon, I. and Nikbakht, E. and Topa, A. (2021) Indirect bridge health monitoring employing contact-point response of instrumented stationary vehicle. Lecture Notes in Civil Engineering, 132 . pp. 883-890.

Hashlamon, I. and Nikbakht, E. and Topa, A. and Elhattab, A. (2021) Numerical parametric study on the effectiveness of the contact-point response of a stationary vehicle for bridge health monitoring. Applied Sciences (Switzerland), 11 (15).

Hashmani, M.A. and Jameel, S.M. and Rizvi, S.S.H. and Shukla, S. (2021) An adaptive federated machine learning-based intelligent system for skin disease detection: A step toward an intelligent dermoscopy device. Applied Sciences (Switzerland), 11 (5). pp. 1-19.

Hassan, F. and Mahmood, A.K.B. and Yahya, N. and Saboor, A. and Abbas, M.Z. and Khan, Z. and Rimsan, M. (2021) State-of-the-Art Review on the Acoustic Emission Source Localization Techniques. IEEE Access, 9 . pp. 101246-101266.

Hizam, S.M. and Bilad, M.R. and Nordin, N.A.H. and Sambudi, N.S. and Wirzal, M.D.H. and Yusof, N. and Klaysom, C. and Jaafar, J. (2021) Inclined forward osmosis module system for fouling control in sustainable produced water treatment using seawater as draw solution. Journal of Water Process Engineering, 40 .

Husain, K. and Zahid, M.S.M. and Hassan, S.U. and Hasbullah, S. and Mandala, S. (2021) Advances of ECG sensors from hardware, software and format interoperability perspectives. Electronics (Switzerland), 10 (2). pp. 1-36.

Hussain, I.A. and Ul-Haq Gilani, S.I. and Al-Kayiem, H.H. and Bin Abdullah, M.Z. and Akhter, J. (2021) Integration of compound parabolic concentrator with solar power tower receiver. Green Energy and Technology . pp. 73-92.

Hussain, P.B. and Shaik, N.B. and Mokhtar, A.A.B. and Bakthavatchalam, B. and Ahmad, F. and Harun, M.S.B. (2021) Failure analysis of a broken SA564 stainless steel pump shaft. International Journal of Materials and Product Technology, 62 (1-3). pp. 152-166.

Idham, Z. and Putra, N.R. and Idrus, N.F.M. and Mili, N. and Ruslan, M.S.H. and Rasidek, N.A.M. and Yunus, M.A.C. (2021) Characteristics and Empirical Modelling of Extract from Hibiscus sabdariffa Using Supercritical CO2 Extraction with Ethanol-Water as Modifier. Lecture Notes in Mechanical Engineering . pp. 375-388.

Idris, N.N. and Mustaffa, Z. and Ben Seghier, M.E.A. and Trung, N.-T. (2021) Burst capacity and development of interaction rules for pipelines considering radial interacting corrosion defects. Engineering Failure Analysis, 121 .

Imran, Q.S. and Siddiqui, N.A. and Latiff, A.H.A. and Bashir, Y. and Khan, M. and Qureshi, K. and Al-Masgari, A.A.-S. and Ahmed, N. and Jamil, M. (2021) Automated fault detection and extraction under gas chimneys using hybrid discontinuity attributes. Applied Sciences (Switzerland), 11 (16).

Iqbal, M. and Karim, S.A.A. and Sarfraz, M. (2021) Construction and Application of Septic B-Spline Tensor Product Scheme. Studies in Systems, Decision and Control, 320 . pp. 101-120.

Irawan, R. and Azizan, N.L. and Liew, M.S. and Al-Yacouby, A.M. and Danyaro, K.U. (2021) Analysis of Spread Moored FPSO-Tanker Side-by-Side System with Offloading Operability. Lecture Notes in Mechanical Engineering . pp. 309-317.

Irfan, S.A. and Shafie, A. (2021) Artificial Neural Network Modeling of Nanoparticles Assisted Enhanced Oil Recovery. Studies in Systems, Decision and Control, 320 . pp. 59-75.

Irshad, K. and Almalawi, A. and Habib, K. and Zahir, M.H. and Ali, A. and Islam, S. and Saha, B.B. (2021) Experimental Study of a Thermoelectric Air Duct Dehumidification System for Tropical Climate. Heat Transfer Engineering, 42 (13-14). pp. 1159-1171.

Isa, N.A. and Bareduan, S.A. and Zainudin, A.S. and Marsudi, M. (2021) Multiple bottlenecks sorting criterion at initial sequence in solving permutation flow shop scheduling problem. Journal of Advanced Manufacturing Technology, 15 (1). pp. 39-54.

Isah, B.W. and Mohamad, H. (2021) Surface-mounted bare and packaged fiber bragg grating sensors for measuring rock strain in uniaxial testing. Sensors, 21 (9).

Isah, B.W. and Mohamad, H. and Ahmad, N.R. (2021) Rock stiffness measurements fibre Bragg grating sensor (FBGs) and the effect of cyanoacrylate and epoxy resin as adhesive materials. Ain Shams Engineering Journal, 12 (2). pp. 1677-1691.

Isiyaka, H.A. and Ramli, A. and Jumbri, K. and Sambudi, N.S. and Zango, Z.U. and Saad, B. (2021) Adsorption and Artificial Neural Network Modelling of Metolachlor Removal by MIL-53(Al) Metal-Organic Framework. Advances in Intelligent Systems and Computing, 1350 A . pp. 245-255.

Islam, J. and Meraj, S.T. and Masaoud, A. and Mahmud, M.A. and Nazir, A. and Kabir, M.A. and Hossain, M.M. and Mumtaz, F. (2021) Opposition-Based Quantum Bat Algorithm to Eliminate Lower-Order Harmonics of Multilevel Inverters. IEEE Access, 9 . pp. 103610-103626.

Islam, J. and Rahaman, M.S.A. and Vasant, P.M. and Negash, B.M. and Hoqe, A. and Alhitmi, H.K. and Watada, J. (2021) A modified niching crow search approach to well placement optimization. Energies, 14 (4).

Ismael, M.A. and A. Aziz, A.R. and Mohammed, S.E. and Zainal A, E.Z. and Baharom, M.B. and Hagos, F.Y. (2021) Macroscopic and microscopic spray structure of water-in-diesel emulsions. Energy, 223 .

Ismail, F.I. and Farhan, S.A. and Shafiq, N. and Husna, N. and Sharif, M.T. and Affan, S.U. and Veerasenan, A.K. (2021) Nano-porous silica-aerogel-incorporated composite materials for thermal-energy-efficient pitched roof in the tropical region. Applied Sciences (Switzerland), 11 (13).

Ismail, K.A.K. and Othman, I. (2021) Causes of construction accidents and the provisions of safety regulations in construction industry in malaysia. Lecture Notes in Civil Engineering, 132 . pp. 602-607.

Ismail, M.T. and Shah, N.Z.A. and Karim, S.A.A. (2021) Modeling solar radiation in peninsular Malaysia using arima model. Green Energy and Technology . pp. 53-71.

Israr, A. and Abro, G.E.M. and Sadiq Ali Khan, M. and Farhan, M. and Bin Mohd Zulkifli, S.U.A. (2021) Internet of Things (IoT)-Enabled Unmanned Aerial Vehicles for the Inspection of Construction Sites: A Vision and Future Directions. Mathematical Problems in Engineering, 2021 .

Isyaku, U.B. and Khir, M.H.B.M. and Nawi, I.M. and Zakariya, M.A. and Zahoor, F. (2021) ZnO Based Resistive Random Access Memory Device: A Prospective Multifunctional Next-Generation Memory. IEEE Access, 9 . pp. 105012-105047.

Jaffari, R. and Hashmani, M.A. and Reyes-Aldasoro, C.C. (2021) A novel focal phi loss for power line segmentation with auxiliary classifier u-net. Sensors, 21 (8).

Jafry, A.A.A. and Muhammad, A.R. and Kasim, N. and Rosol, A.H.A. and Rusdi, M.F.M. and Ab Alim, N.N.N. and Harun, S.W. and Yupapin, P. (2021) Ultrashort pulse generation with MXene Ti3C2Tx embedded in PVA and deposited onto D-shaped fiber. Optics and Laser Technology, 136 .

Jagaba, A.H. and Kutty, S.R.M. and Hayder, G. and Baloo, L. and Ghaleb, A.A.S. and Lawal, I.M. and Abubakar, S. and Al-dhawi, B.N.S. and Almahbashi, N.M.Y. and Umaru, I. (2021) Degradation of Cd, Cu, Fe, Mn, Pb and Zn by Moringa-oleifera, zeolite, ferric-chloride, chitosan and alum in an industrial effluent. Ain Shams Engineering Journal, 12 (1). pp. 57-64.

Jagaba, A.H. and Kutty, S.R.M. and Noor, A. and Birniwa, A.H. and Affam, A.C. and Lawal, I.M. and Kankia, M.U. and Kilaco, A.U. (2021) A systematic literature review of biocarriers: Central elements for biofilm formation, organic and nutrients removal in sequencing batch biofilm reactor. Journal of Water Process Engineering, 42 .

Jalal, A. and Hakim, L. and Shafiq, N. (2021) Mechanical and post-cracking characteristics of fiber reinforced concrete containing copper-coated steel and PVA fibers in 100 cement and fly ash concrete. Applied Sciences (Switzerland), 11 (3). pp. 1-14.

Jamaludin, S.N.F. and Pubellier, M. and Sautter, B. (2021) Shallow vs. Deep subsurface structures of Central Luconia Province, offshore Malaysia reveal by aeromagnetic, airborne gravity and seismic data. Applied Sciences (Switzerland), 11 (11).

Jamil, A. and Baharom, M.B. and A. Aziz, A.R. (2021) IC engine in-cylinder cold-flow analysis � A critical review. Alexandria Engineering Journal, 60 (3). pp. 2921-2945.

Jamil, M. and Siddiqui, N.A. and Rahman, A.H.B.A. and Ibrahim, N.A. and Ismail, M.S.B. and Ahmed, N. and Usman, M. and Gul, Z. and Imran, Q.S. (2021) Facies heterogeneity and lobe facies multiscale analysis of deep-marine sand-shale complexity in the west crocker formation of sabah basin, nw borneo. Applied Sciences (Switzerland), 11 (12).

Jan, A.A. and Lai, F.-W. and Tahir, M. (2021) Developing an Islamic Corporate Governance framework to examine sustainability performance in Islamic Banks and Financial Institutions. Journal of Cleaner Production, 315 .

Jaya, I. and Alaloul, W.S. and Musarat, M.A. (2021) Role of inflation in construction: A systematic review. Lecture Notes in Civil Engineering, 132 . pp. 701-708.

Joewono, T.B. and Rizki, M. and Dharmowijoyo, D.E. and Prasetyanto, D. (2021) Investigating the ride-hailing users and their perception of the usefulness of its services: A case from bandung, indonesia. Lecture Notes in Civil Engineering, 132 . pp. 852-860.

Junejo, A.Z. and Hashmani, M.A. and Memon, M.M. (2021) Empirical evaluation of privacy efficiency in blockchain networks: Review and open challenges. Applied Sciences (Switzerland), 11 (15).

Kabir Ahmad, R. and Anwar Sulaiman, S. and Yusup, S. and Sham Dol, S. and Inayat, M. and Aminu Umar, H. (2021) Exploring the potential of coconut shell biomass for charcoal production. Ain Shams Engineering Journal .

Kalantari, H. and Ghoreishi-Madiseh, S.A. and Kurnia, J.C. and Sasmito, A.P. (2021) An analytical correlation for conjugate heat transfer in fin and tube heat exchangers. International Journal of Thermal Sciences, 164 .

Kamal, A.A.A. and Mohamad, S. and Mohamad, M. and Wannahari, R. and Sulaiman, A.Z. and Ajit, A. and Lim, J.-W. and Zaudin, N.A.C. (2021) Extraction of gallic acid from chromolaena sp. Using ultrasound-assisted extraction. Engineering Journal, 25 (2). pp. 269-276.

Kamal, K. and Grekov, D.I. and Shariff, A.M. and Bustam, M.A. and Pré, P. (2021) Improving textural properties of magnesium-based metal-organic framework for gas adsorption by carbon doping. Microporous and Mesoporous Materials, 323 .

Kamal, N.L.M. and Shafiq, N. and Alaloul, W.S. and Beddu, S. and Abd Manan, T.S.B. (2021) Application of response surface methodology for the optimization of mix design concrete using coal bottom ash as cement replacement material. Lecture Notes in Civil Engineering, 132 . pp. 396-404.

Kannan, R. and Singh, I.S.I. (2021) Power Performance Analysis of Solar Tracking System in UTP. Studies in Systems, Decision and Control, 320 . pp. 47-57.

Karim, S.A.A. (2021) Preface. Studies in Systems, Decision and Control, 319 . v-vii.

Karim, S.A.A. and Izhar, L.I. and Othman, M. and Zainuddin, N. (2021) Surface Interpolation Using Partially Blended Rational Bi-Quartic Spline. Studies in Systems, Decision and Control, 319 . pp. 53-70.

Karim, S.A.A. and Nguyen, V.T. (2021) On the Space of m-Subharmonic Functions. Studies in Systems, Decision and Control, 319 . pp. 133-166.

Karim, S.A.A. and Nguyen, V.T. (2021) Positivity-Preserving Interpolation Using Rational Quartic Spline Functions. Studies in Systems, Decision and Control, 319 . pp. 87-98.

Karim, S.A.A. and Saad, N. and Kannan, R. (2021) Preface. Studies in Systems, Decision and Control, 320 . v-vi.

Kassa, S. and Gupta, P. and Kumar, M. and Stephan, T. and Kannan, R. (2021) Rotated majority gate-based 2n-bit full adder design in quantum-dot cellular automata nanotechnology. Circuit World .

Khalili, N.F.M. and Jun, H.J. and Ahmad, A. and Sallih, N. and Lajis, M.A. and Shamsudin, S. (2021) The Investigation of Hot Extrusion Process Parameters on Microstructure and Mechanical Performance of Aluminium Alloy in Biomedical Industry. Lecture Notes in Mechanical Engineering . pp. 327-332.

Khan, A. and Sanaullah, K. and Zwawi, M. and Farooqi, A.S. and Rigit, A.R.H. and Ullah, A. (2021) Influence of intermittent steam injection into saline water: a study of wave motions in saline water for optimizing similar hydrodynamics in direct contact condensation based milk sterilization process. Waves in Random and Complex Media .

Khan, D.M. and Yahya, N. and Kamel, N. and Faye, I. (2021) Automated Diagnosis of Major Depressive Disorder Using Brain Effective Connectivity and 3D Convolutional Neural Network. IEEE Access, 9 . pp. 8835-8846.

Khan, D.M. and Yahya, N. and Kamel, N. and Faye, I. (2021) Effective Connectivity in Default Mode Network for Alcoholism Diagnosis. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 29 . pp. 796-808.

Khan, J.A. and Irawan, S. and Seela Thurai, A. and Cai, B. (2021) Quantitative analysis of blowout preventer flat time for well control operation: Value added data aimed at performance enhancement. Engineering Failure Analysis, 120 .

Khan, M.A. and Sadique, M.R. and Harahap, I.H. and Zaid, M. and Alam, M.M. (2021) Static and Dynamic Analysis of the Shielded Tunnel in Alluvium Soil with 2D FEM Model. Transportation Infrastructure Geotechnology .

Khan, M.I. and Sutanto, M.H. and Napiah, M.B. and Khan, K. and Rafiq, W. (2021) Design optimization and statistical modeling of cementitious grout containing irradiated plastic waste and silica fume using response surface methodology. Construction and Building Materials, 271 .

Khan, M.K.A. and Khan, J.A. and Ullah, H. and Al-Kayiem, H.H. and Irawan, S. and Irfan, M. and Glowacz, A. and Liu, H. and Glowacz, W. and Rahman, S. (2021) De-emulsification and gravity separation of micro-emulsion produced with enhanced oil recovery chemicals flooding. Energies, 14 (8).

Khan, N.A. and Ahmed, S. and Razzaq, O.A. and Kamil Mahmood, A. (2021) Exploring fractional order 2-D Helmholtz equation using finite difference scheme through the bat optimization algorithm. Mathematical Methods in the Applied Sciences .

Khan, Z. and Yahya, N. and Alsaih, K. and Al-Hiyali, M.I. and Meriaudeau, F. (2021) Recent Automatic Segmentation Algorithms of MRI Prostate Regions: A Review. IEEE Access, 9 . pp. 97878-97905.

Khlief, A.K. and Ul Haq Gilani, S.I. and Al-Kayiem, H.H. and Mohammad, S.T. (2021) Concentrated solar tower hybrid evacuated tube�photovoltaic/thermal receiver with a non-imaging optic reflector: A case study. Journal of Cleaner Production, 298 .

Khoo, K.S. and Ooi, C.W. and Chew, K.W. and Foo, S.C. and Lim, J.W. and Tao, Y. and Jiang, N. and Ho, S.-H. and Show, P.L. (2021) Permeabilization of Haematococcus pluvialis and solid-liquid extraction of astaxanthin by CO2-based alkyl carbamate ionic liquids. Chemical Engineering Journal, 411 .

Khoo, K.S. and Tan, X. and Ooi, C.W. and Chew, K.W. and Leong, W.H. and Chai, Y.H. and Ho, S.-H. and Show, P.L. (2021) How does ionic liquid play a role in sustainability of biomass processing? Journal of Cleaner Production, 284 .

Khurshid, T. and Fatima, S. and Khanday, F.A. and Bashir, F. and Zahoor, F. and Hussin, F.A. (2021) Carbon nanotube field effect transistor (CNTFET) operational transconductance amplifier (OTA) based design of high frequency memristor emulator. International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 34 (2).

Kineber, A.F. and Othman, I. and Oke, A.E. and Buniya, M.K. (2021) Value Management Activities in Building Projects in Developing Countries. Lecture Notes in Civil Engineering, 139 LN . pp. 63-70.

Kineber, A.F. and Othman, I. and Oke, A.E. and Chileshe, N. and Buniya, M.K. (2021) Impact of Value Management on Building Projects Success: Structural Equation Modeling Approach. Journal of Construction Engineering and Management, 147 (4).

Kineber, A.F. and Othman, I. and Oke, A.E. and Chileshe, N. and Zayed, T. (2021) Exploring the value management critical success factors for sustainable residential building � A structural equation modelling approach. Journal of Cleaner Production, 293 .

Kumar, A. and Ridha, S. and Narahari, M. and Ilyas, S.U. (2021) Physics-guided deep neural network to characterize non-Newtonian fluid flow for optimal use of energy resources. Expert Systems with Applications, 183 .

Kumar, R. and Kannan, R. and Nor, N.B.M. and Mahmud, A. (2021) A high step-up switched z-source converter (Hs-szc) with minimal components count for enhancing voltage gain. Electronics (Switzerland), 10 (8).

Kumar, R.S. and Al-Arbi Ganat, T. and Sharma, T. (2021) Performance evaluation of silica nanofluid for sand column transport with simultaneous wettability alteration: An approach to environmental issue. Journal of Cleaner Production, 303 .

Kumar, V. and Al-Gheethi, A. and Asharuddin, S.M. and Othman, N. (2021) Potential of cassava peels as a sustainable coagulant aid for institutional wastewater treatment: Characterisation, optimisation and techno-economic analysis. Chemical Engineering Journal, 420 .

Kurnia, J.C. and Chaedir, B.A. and Sasmito, A.P. and Shamim, T. (2021) Progress on open cathode proton exchange membrane fuel cell: Performance, designs, challenges and future directions. Applied Energy, 283 .

Lalji, S.M. and Khan, M.A. and Haneef, J. and Ali, S.I. and Arain, A.H. and Shah, S.S. (2021) Nano-particles adapted drilling fluids for the swelling inhibition for the Northern region clay formation of Pakistan. Applied Nanoscience (Switzerland) .

Latheef, M. and Kim, D.K. (2021) Directional spreading resolution from point measurements for mixed seas and sea states with frequency dependent spreading. Ocean Engineering, 229 .

Lau, J.-S. and Lee, W.-J. and Beh, H.-G. and Sujarwo, W. and Hariharan, K. and Panneerselvam, B. and Ho, Y.-C. (2021) Emerging coagulant in water treatment: A review and a preliminary study. Lecture Notes in Civil Engineering, 132 . pp. 187-194.

Lau, Z.Y. and Tan, K.S. and Khe, C.S. and Lai, C.W. and You, K.Y. and Tan, W.K. (2021) Synthesis of mrgo nanocomposites as a potential photocatalytic demulsifier for crude oil-in-water emulsion. Journal of Composites Science, 5 (7).

Lee, S.C. and Tee, B.P. and Chong, M.F. and Mohamad, H. and Ang, K.A. and Rahardjo, P.P. (2021) Application of Distributed Fibre Optic Sensor (DFOS) in Bi-directional Static Pile Load Tests. Geotechnical Engineering, 55 (1). pp. 48-54.

Lekkala, M.R. and Latheef, M. and Kim, D.K. and Wahab, M.B.A. (2021) Numerical assessment of flow around circular cylinder. Lecture Notes in Civil Engineering, 132 . pp. 289-301.

Leong, S.Y. and Kutty, S.R.M. and Bashir, M.J.K. and Li, Q. (2021) A circular economy framework based on organic wastes upcycling for biodiesel production from hermetia illucens. Engineering Journal, 25 (2). pp. 223-234.

Liaw, K.L. and Kurnia, J.C. and Sasmito, A.P. (2021) Turbulent convective heat transfer in helical tube with twisted tape insert. International Journal of Heat and Mass Transfer, 169 .

Liew, M.S. and Mohammed, B.S. and Danyaro, K.U. and Al-Yacouby, A.M. and Haruna, S. (2021) Effects of quartz powder on the compressive strength of high performance engineered cementitious composites. Lecture Notes in Civil Engineering, 132 . pp. 677-684.

Lim, L.G. and Ung, W.C. and Chan, Y.L. and Lu, C.-K. and Funane, T. and Kiguchi, M. and Tang, T.B. (2021) Optimizing mental workload estimation by detecting baseline state using vector phase analysis approach. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 29 . pp. 597-606.

Lin, C.-H. and Liao, W.-M. and Liang, J.-W. and Chen, P.-H. and Ko, C.-E. and Yang, C.-H. and Lu, C.-K. (2021) Denoising Performance Evaluation of Automated Age-Related Macular Degeneration Detection on Optical Coherence Tomography Images. IEEE Sensors Journal, 21 (1). pp. 790-801.

Lo, M. and Karuppanan, S. and Ovinis, M. (2021) Failure pressure prediction of a corroded pipeline with longitudinally interacting corrosion defects subjected to combined loadings using fem and ann. Journal of Marine Science and Engineering, 9 (3).

Looi, K.K. and Baheta, A.T. and Habib, K. (2021) Experimental Performance and Comfort Analyses of Photovoltaic Thermoelectric System in a Room Air-Conditioning Application. Heat Transfer Engineering, 42 (13-14). pp. 1172-1183.

Ma, G. and Kamaruddin, M.H. and Kang, H.-S. and Goh, P.-S. and Kim, M.-H. and Lee, K.-Q. and Ng, C.-Y. (2021) Watertight integrity of underwater robotic vehicles by self-healing mechanism. Ain Shams Engineering Journal, 12 (2). pp. 1995-2007.

Ma, Z. and Yang, Y. and Zhai, G. and Bao, J. and Teh, H.-M. (2021) A study of the impact of plunging waves on the inverted L-shaped breakwater structure based on SPH method. Ships and Offshore Structures .

Madhavi, V. and Vijaya Bhaskar Reddy, A. and Madhavi, G. (2021) Synthesis, characterization, and properties of carbon nanocomposites and their application in wastewater treatment. Green Energy and Technology . pp. 61-83.

Maghsoudi Nia, E. and Wan Abdullah Zawawi, N.A. and Mahinder Singh, B.S. (2021) Design of a Walkway Using Renewable Energy Harvesters Within Pavement. Lecture Notes in Mechanical Engineering . pp. 281-288.

Maghsoudi Nia, E. and Wan Abdullah Zawawi, N.A. and Mahinder Singh, B.S. (2021) A Review of Hybrid Piezoelectric-Photovoltaic System for Lighting a Pedestrian Walkway. Lecture Notes in Civil Engineering, 139 LN . pp. 335-366.

Mahadi, N.H. and Mohamad, H. (2021) Interpretation method of distributed fibre optic strain sensor in instrumented static pile load test. Lecture Notes in Civil Engineering, 132 . pp. 772-778.

Mahmood, S.N. and Ishak, A.J. and Saeidi, T. and Soh, A.C. and Jalal, A. and Imran, M.A. and Abbasi, Q.H. (2021) Full ground ultra-wideband wearable textile antenna for breast cancer and wireless body area network applications. Micromachines, 12 (3).

Maldar, N. and Ng, C.Y. and Fitriadhy, A. and Kang, H.S. (2021) Numerical investigation of an efficient blade design for a flow driven horizontal axis marine current turbine. Lecture Notes in Civil Engineering, 132 . pp. 241-248.

Malik, A.A. and Nasif, M.S. and Mokhtar, A.A. and Mohd Tohir, M.Z. (2021) Numerical investigation of the effect of weather conditions on the escalation and propagation of fire-induced domino effect. Process Safety Progress .

Manzoor, B. and Othman, I. (2021) Safety Management Model During Construction Focusing on Building Information Modeling (BIM). Lecture Notes in Civil Engineering, 139 LN . pp. 31-37.

Manzoor, B. and Othman, I. and Durdyev, S. and Ismail, S. and Wahab, M.H. (2021) Influence of artificial intelligence in civil engineering toward sustainable development�a systematic literature review. Applied System Innovation, 4 (3).

Manzoor, B. and Othman, I. and Gardezi, S.S.S. and Altan, H. and Abdalla, S.B. (2021) Bim-based research framework for sustainable building projects: A strategy for mitigating bim implementation barriers. Applied Sciences (Switzerland), 11 (12).

Manzoor, B. and Othman, I. and Gardezi, S.S.S. and Harirchian, E. (2021) Strategies for adopting building information modeling (Bim) in sustainable building projects�A case of Malaysia. Buildings, 11 (6).

Manzoor, B. and Othman, I. and Manzoor, M. (2021) Evaluating the critical safety factors causing accidents in high-rise building projects. Ain Shams Engineering Journal .

Maqsood, K. and Ali, A. and Nasir, R. and Abdulrahman, A. and Mahfouz, A.B. and Ahmed, A. and Shariff, A.B.M. and Ganguly, S. and Mubashir, M. and Show, P.L. (2021) Experimental and simulation study on high-pressure V-L-S cryogenic hybrid network for CO2 capture from highly sour natural gas. Process Safety and Environmental Protection, 150 . pp. 36-50.

Masood, F. and Nallagownden, P. and Elamvazuthi, I. and Alam, M.A. and Ali, M. and Azeem, M. (2021) Design and Optical Performance Analysis of a Quasi-stationary Compound Parabolic Concentrator for Photovoltaic Applications. Lecture Notes in Mechanical Engineering . pp. 241-248.

Masroor, K. and Jeoti, V. and Drieberg, M. and Cheab, S. and Rajbhandari, S. (2021) A heuristic approach for optical transceiver placement to optimize snr and illuminance uniformities of an optical body area network. Sensors, 21 (9).

Mathur, N. and Asirvadam, V.S. and Dass, S.C. and Gill, B.S. (2021) Dynamic Mapping and Visualizing Dengue Incidences in Malaysia Using Machine Learning Techniques. EAI/Springer Innovations in Communication and Computing . pp. 195-226.

Mazinani, I. and Sarafraz, M.M. and Ismail, Z. and Hashim, A.M. and Safaei, M.R. and Wongwises, S. (2021) Fluid-structure interaction computational analysis and experiments of tsunami bore forces on coastal bridges. International Journal of Numerical Methods for Heat and Fluid Flow, 31 (5). pp. 1373-1395.

Mazlina, M. and Liew, M.S. and Adnan, A. and Harahap, I.S.H. and Hamid, N.H. (2021) Ground response analysis for stiff and soft soil under different earthquake events: A comparison. Lecture Notes in Civil Engineering, 132 . pp. 891-898.

Md Yusof, M.A. and Mohamed, M.A. and Md Akhir, N.A. and Ibrahim, M.A. and Mardhatillah, M.K. (2021) Combined Impact of Salt Precipitation and Fines Migration on CO2 Injectivity Impairment. International Journal of Greenhouse Gas Control, 110 .

Medhi, N.S. and Haryoko, L.A.F. and Kurnia, J.C. (2021) Numerical Investigation of Electronic Cooling with Phase Change Material. Lecture Notes in Mechanical Engineering, 46 . pp. 451-461.

Memon, A.M. and Sutanto, M.H. and Napiah, M. and Wong, F. and Bujang, M. (2021) Effects of bitumen modification on pavement performance subjected to high vehicular speed and extreme temperature conditions: A review. Lecture Notes in Civil Engineering, 132 . pp. 1044-1051.

Memon, A.M. and Sutanto, M.H. and Napiah, M. and Yusoff, N.I.M. and Memon, R.A. and Al-Sabaeei, A.M. and Ali, M. (2021) Physicochemical, rheological and morphological properties of bitumen incorporating petroleum sludge. Construction and Building Materials, 297 .

Meraj, S.T. and Hasan, M.K. and Islam, J. and El-Ebiary, Y.A.B. and Nebhen, J. and Hossain, M.M. and Alam, M.K. and Vo, N. (2021) A Diamond Shaped Multilevel Inverter with Dual Mode of Operation. IEEE Access, 9 . pp. 59873-59887.

Meraj, S.T. and Yahaya, N.Z. and Hasan, K. and Masaoud, A. (2021) A hybrid T-type (HT-type) multilevel inverter with reduced components. Ain Shams Engineering Journal, 12 (2). pp. 1959-1971.

Meyghani, B. and Awang, M. and Emamian, S.S. (2021) Introducing an enhanced friction model for developing inertia welding simulation: A computational solid mechanics approach. International Journal of Engineering Transactions C: Aspects, 34 (3). pp. 737-743.

Meyghani, B. and Awang, M.B. and Teimouri, R. (2021) Prediction of the Temperature Behaviour During Friction Stir Welding (FSW) Using Hyperworks®. Lecture Notes in Mechanical Engineering . pp. 119-130.

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. (2021) Effect of phase change material on rheological properties of asphalt mastic. Lecture Notes in Civil Engineering, 132 . pp. 836-843.

Mohamad, M. and Wannahari, R. and Mohammad, R. and Shoparwe, N.F. and Nawi, A.S.M. and Lun, K.W. and Wei, L.J. (2021) Adsorption of malachite green dye using spent coffee ground biochar: Optimisation using response surface methodology. Jurnal Teknologi, 83 (1). pp. 27-36.

Mohammed, B.S. and Al-Fakih, A. and Liew, M.S. (2021) Characteristics of interlocking concrete bricks incorporated crumb rubber and fly ash. Lecture Notes in Civil Engineering, 132 . pp. 631-639.

Mohammed, B.S. and Shafiq, N. and Kutty, S.R.M. and Mohamad, H. and Balogun, A.-L. (2021) Preface. Lecture Notes in Civil Engineering, 132 . v.

Mohammed, B.S. and Xian, L.W. and Haruna, S. and Liew, M.S. and Abdulkadir, I. and Zawawi, N.A.W.A. (2021) Deformation Properties of Rubberized Engineered Cementitious Composites Using Response Surface Methodology. Iranian Journal of Science and Technology - Transactions of Civil Engineering, 45 (2). pp. 729-740.

Mohan, D.G. and Kalid, K.S. (2021) The Development of a Criteria-Based Group Formation Systems for Student Group Work. Lecture Notes on Data Engineering and Communications Technologies, 72 . pp. 903-910.

Mohd Mokhtar, M.R. and Wahab, S.N.A. and Myint, K.C. (2021) Assessing landslide exposure from soil characteristics using unmanned aerial vehicle (Uav). Lecture Notes in Civil Engineering, 132 . pp. 1123-1129.

Mohmmed, A.O. and Al-Kayiem, H.H. and Osman, A.B. (2021) Investigations on the slug two-phase flow in horizontal pipes: Past, presents, and future directives. Chemical Engineering Science, 238 .

Muhammad, M.M. and Yusof, K.W. and Ul Mustafa, M.R. and Ab. Ghani, A. and Abdurrasheed, A.S. and Sholagberu, A.T. and Argungu, A.S. and Abubakar, U.A. (2021) Hydrodynamics of flow over axonopus compressus (Cow grass) as a flexible vegetation. Lecture Notes in Civil Engineering, 132 . pp. 103-110.

Mukhtar, A. and Saqib, S. and Ullah, S. and Sagir, M. and Tahir, M.B. and Mahmood, A. and Al-Sehemi, A.G. and Assiri, M.A. and Ibrahim, M. and Mehdi, S.E.H. (2021) Application of Membrane in Reaction Engineering for Green Synthesis. Advances in Science, Technology and Innovation . pp. 163-171.

Mukhtar, A. and Ullah, S. and Inayat, A. and Saqib, S. and Mellon, N.B. and Assiri, M.A. and Al-Sehemi, A.G. and Khan Niazi, M.B. and Jahan, Z. and Bustam, M.A. and Ibrahim, M. (2021) Synthesis-structure-property relationship of nitrogen-doped porous covalent triazine frameworks for pre-combustion CO2 capture. Energy, 216 .

Mumtaz, F. and Zaihar Yahaya, N. and Tanzim Meraj, S. and Singh, B. and Kannan, R. and Ibrahim, O. (2021) Review on non-isolated DC-DC converters and their control techniques for renewable energy applications. Ain Shams Engineering Journal .

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Construction machinery hire rates deviation in Malaysia: an inflation rate effect analysis. Revista de la Construccion, 20 (1). pp. 91-105.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Impact of inflation rate on construction projects budget: A review. Ain Shams Engineering Journal, 12 (1). pp. 407-414.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Inflation rate and labours� wages in construction projects: economic relation investigation. Engineering, Construction and Architectural Management .

Musbah, M.F. and Hustim, M. and Madhoun, W.A. (2021) Assessing the seasonal variation of particulate matters concentration in perak, malaysia. Lecture Notes in Civil Engineering, 132 . pp. 983-991.

Mushtaq, A. and Mukhtar, H.B. and Shariff, A.M. (2021) Characterization of Synthesized Polymeric Blend Membranes Enhanced By Methyl Diethanolamine For Efficient co2Separation. Journal of Thermal Engineering, 7 (2). pp. 71-82.

Mustaffa, Z. and Halim, A.H.A. and Kim, D.K. and van Gelder, P.H.A.J.M. (2021) Reliability assessment of the vertical well system subjected to erosion and tubing failure. Ships and Offshore Structures, 16 (2). pp. 127-134.

Nadeem, S. and Mumtaz, A. and Alnarabiji, M.S. and Mutalib, M.I.A. and Abdullah, B. (2021) Highly porous Zr-MCM-48 immobilized Cu-porphyrin for photocatalytic reduction of CO2 to methanol in a slurry reactor. Journal of Materials Science: Materials in Electronics .

Naidua, T. and Qadir, D. and Nasir, R. and Mannan, H.A. and Mukhtar, H. and Maqsood, K. and Ali, A. and Abdulrahman, A. (2021) Utilization of moringa oleifera and nanofiltration membrane to treat palm oil mill effluent (POME) Einsatz von Moringa oleifera und Nanofiltrationsmembranen zur Behandlung von Palmöl-Mühlenabwasser. Materialwissenschaft und Werkstofftechnik, 52 (3). pp. 346-356.

Naqvi, S.R. and Naqvi, M. and Ammar Taqvi, S.A. and Iqbal, F. and Inayat, A. and Khoja, A.H. and Mehran, M.T. and Ayoub, M. and Shahbaz, M. and Saidina Amin, N.A. (2021) Agro-industrial residue gasification feasibility in captive power plants: A South-Asian case study. Energy, 214 .

Naseer, H. and Gilani, S.I.-H. and Al-Kayiem, H.H. and Ahmad, N. (2021) Nanofluids application in solar thermal collectors. Green Energy and Technology . pp. 93-114.

Naseer, S. and Ali, R.F. and Fati, S.M. and Muneer, A. (2021) INitroY-Deep: Computational Identification of Nitrotyrosine Sites to Supplement Carcinogenesis Studies Using Deep Learning. IEEE Access, 9 . pp. 73624-73640.

Nasir, R. and Mohshim, D.F. and Mannan, H.A. and Qadir, D. and Mukhtar, H. and Maqsood, K. and Ali, A. and Maulianda, B. and Abdulrahman, A. and Mahfouz, A.B. (2021) A perspective on ionic liquid-based membranes for CO2 separation. Chemical Papers, 75 (3). pp. 839-852.

Naz, M.Y. and Shukrullah, S. and Noman, M. and Yaseen, M. and Naeem, M. and Sulaiman, S.A. (2021) Effect of Water-Mixed Polyvinyl Alcohol Viscosity on Wear Response of Carbon Steel Exposed to an Eroding Medium. Journal of Materials Engineering and Performance, 30 (3). pp. 2066-2073.

New, E.K. and Wu, T.Y. and Voon, K.S. and Procentese, A. and Shak, K.P.Y. and Teoh, W.H. and Lim, J.W. and Md. Jahim, J. (2021) A Utilization of Choline Chloride-Based Deep Eutectic Solvent Integrated with Alkaline Earth Metal Hexahydrate in the Pretreatment of Oil Palm Fronds. Industrial and Engineering Chemistry Research, 60 (5). pp. 2011-2026.

Ng, K.H. and Lai, S.Y. and Cheng, C.K. and Cheng, Y.W. and Chong, C.C. (2021) Photocatalytic water splitting for solving energy crisis: Myth, Fact or Busted? Chemical Engineering Journal, 417 .

Nguyen, V.-H. and Shahedi Asl, M. and Delbari, S.A. and Le, Q.V. and Sabahi Namini, A. and Cha, J.H. and Lee, S.-H. and Jang, H.W. and Mustapha, M. and Mohammadi, M. and Shokouhimehr, M. (2021) Microstructural evolution during spark plasma sintering of TiC�AlN�graphene ceramics. International Journal of Refractory Metals and Hard Materials, 96 .

Nikbakht, E. and Wong Weng Lok, J. and Teo, W. (2021) Structural behaviour of novel composite beams consisting of geopolymer concrete and high-performance concrete. Structures, 32 . pp. 106-115.

Nor, A.K.M. and Pedapati, S.R. and Muhammad, M. (2021) Reliability engineering applications in electronic, software, nuclear and aerospace industries: A 20 year review (2000�2020). Ain Shams Engineering Journal .

Oke, A.E. and Kineber, A.F. and Al-Bukhari, I. and Famakin, I. and Kingsley, C. (2021) Exploring the benefits of cloud computing for sustainable construction in Nigeria. Journal of Engineering, Design and Technology .

Oke, A.E. and Kineber, A.F. and Albukhari, I. and Othman, I. and Kingsley, C. (2021) Assessment of cloud computing success factors for sustainable construction industry: The case of Nigeria. Buildings, 11 (2). pp. 1-15.

Oladosu, T.L. and Al-Kayiem, H.H. and Gilani, S.I.U. and Baheta, A.T. (2021) Dehumidification and thermal regeneration characterization of binary deep eutectic solvents in liquid desiccant air conditioning systems. Journal of Building Engineering, 42 .

Ong, A.C.W. and Shamsuri, N.A. and Zaine, S.N.A. and Panuh, D. and Shukur, M.F. (2021) Nanocomposite polymer electrolytes comprising starch-lithium acetate and titania for all-solid-state supercapacitor. Ionics, 27 (2). pp. 853-865.

Osman, A. and Zulkifli, N. and Said, M.A. and Tuan Kamaruddin, T.N.A. (2021) Experimental study on recoverable thermal energy from low thermal inertia exhaust heat recovery unit. Advances in Mechanical Engineering, 13 (6).

Othman, I. and Al-Ashmori, Y.Y. and Rahmawati, Y. and Mugahed Amran, Y.H. and Al-Bared, M.A.M. (2021) The level of Building Information Modelling (BIM) Implementation in Malaysia. Ain Shams Engineering Journal, 12 (1). pp. 455-463.

Othman, I. and Darda�U Rafindadi, A. and Napiah, M. and Miki�, M. and Ahmad, H. and Aliyuyaro, N.S. and Isah, B.W. and Kineber, A.F. and Buniya, M.K. (2021) Development of framework for bim-based tools to minimize the causes of accidents in construction. Lecture Notes in Civil Engineering, 132 . pp. 608-619.

Othman, I. and Ghafar, N.H.A. and Choon, S.W. (2021) The effectiveness implementation of project risk management plan in property development in malaysia. Lecture Notes in Civil Engineering, 132 . pp. 663-668.

Othman, I. and Kineber, A.F. and Oke, A.E. and Zayed, T. and Buniya, M.K. (2021) Barriers of value management implementation for building projects in Egyptian construction industry. Ain Shams Engineering Journal, 12 (1). pp. 21-30.

Palanidoss, S. and Thazhathu, S.V. and Bhaskar, M.S. and Kannan, R. and Baboli, P.T. (2021) Comprehensive review of single stage switched boost inverter structures. IET Power Electronics .

Palli, A.S. and Jaafar, J. and Hashmani, M.A. (2021) Performance Degradation of Multi-class Classification Model Due to Continuous Evolving Data Streams. Lecture Notes on Data Engineering and Communications Technologies, 72 . pp. 696-706.

Phan, T.H. and Tran, D.C. and Hassan, M.F. (2021) Vietnamese character recognition based on cnn model with reduced character classes. Bulletin of Electrical Engineering and Informatics, 10 (2). pp. 962-969.

Praikaew, W. and Kiatkittipong, W. and Aiouache, F. and Najdanovic-Visak, V. and Ngaosuwan, K. and Wongsawaeng, D. and Lim, J.W. and Lam, S.S. and Kiatkittipong, K. and Laosiripojana, N. and Boonyasuwat, S. and Assabumrungrat, S. (2021) Process and energy intensification of glycerol carbonate production from glycerol and dimethyl carbonate in the presence of eggshell-derived cao heterogeneous catalyst. Energies, 14 (14).

Pysal, D. and Abdulkadir, S.J. and Mohd Shukri, S.R. and Alhussian, H. (2021) Classification of children's drawing strategies on touch-screen of seriation objects using a novel deep learning hybrid model. Alexandria Engineering Journal, 60 (1). pp. 115-129.

Qadeer, M.U. and Ayoub, M. and Komiyama, M. and Khan Daulatzai, M.U. and Mukhtar, A. and Saqib, S. and Ullah, S. and Qyyum, M.A. and Asif, S. and Bokhari, A. (2021) Review of biodiesel synthesis technologies, current trends, yield influencing factors and economical analysis of supercritical process. Journal of Cleaner Production, 309 .

Qasim, M. and Ayoub, M. and Aqsha, A. and Zulfiqar, M. (2021) Preparation of Metal Oxide-based Oxygen Carriers Supported with CeO2 and γ-Al2O3 for Chemical Looping Combustion. Chemical Engineering and Technology, 44 (4). pp. 782-787.

Qasim, M. and Ayoub, M. and Ghazali, N.A. and Aqsha, A. and Ameen, M. (2021) Recent Advances and Development of Various Oxygen Carriers for the Chemical Looping Combustion Process: A Review. Industrial and Engineering Chemistry Research, 60 (24). pp. 8621-8641.

Rafiq, W. and Napiah, M. and Habib, N.Z. and Sutanto, M.H. and Alaloul, W.S. and Khan, M.I. and Musarat, M.A. and Memon, A.M. (2021) Modeling and design optimization of reclaimed asphalt pavement containing crude palm oil using response surface methodology. Construction and Building Materials, 291 .

Ragab, M.G. and Abdulkadir, S.J. and Aziz, N. and Alhussian, H. and Bala, A. and Alqushaibi, A. (2021) An ensemble one dimensional convolutional neural network with bayesian optimization for environmental sound classification. Applied Sciences (Switzerland), 11 (10).

Rana, M.M. and Romlie, M.F. and Abdullah, M.F. and Uddin, M. and Rahman, M.O. (2021) Modeling of an isolated microgrid with hybrid PV-BESS system for peak load shaving simulation. International Journal of Advanced Technology and Engineering Exploration, 8 (75). pp. 352-361.

Rana, M.M. and Romlie, M.F. and Abdullah, M.F. and Uddin, M. and Sarkar, M.R. (2021) A novel peak load shaving algorithm for isolated microgrid using hybrid PV-BESS system. Energy, 234 .

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2021) Stability Analysis of Partial Slip Texture Journal Bearing. Lecture Notes in Mechanical Engineering . pp. 217-225.

Rashid, M.I. and Ali, C.H. and Mukhtar, K. and Benhelal, E. and Athar, M. (2021) Operational discipline in practice. Process Safety Progress, 40 (2).

Rashid, S. and Bashir, F. and Khanday, F.A. and Rafiq Beigh, M. and Hussin, F.A. (2021) 2-D Design of Double Gate Schottky Tunnel MOSFET for High-Performance Use in Analog/RF Applications. IEEE Access, 9 . pp. 80158-80169.

Rasool, F. and Drieberg, M. and Badruddin, N. and Sebastian, P. and Qian, C.T.J. (2021) Electrical battery modeling for applications in wireless sensor networks and internet of things. Bulletin of Electrical Engineering and Informatics, 10 (4). pp. 1793-1802.

Razak, N.N.A. and Abdulkadir, S.J. and Maoinser, M.A. and Shaffee, S.N.A. and Ragab, M.G. (2021) One�dimensional convolutional neural network with adaptive moment estimation for modelling of the sand retention test. Applied Sciences (Switzerland), 11 (9).

Redzuan, S. and Ho, C.Y. and Idham, Z. and Yusuf, S. and Putra, N.R. and Yunus, M.A.C. and Mansor, S. and Ruslan, M.S.H. (2021) Optimization of Anthocyanins Extracts from Roselle (Hibiscus sabdarifa) Petals Using Ultrasonic-Assisted Extraction Method. Lecture Notes in Mechanical Engineering . pp. 295-309.

Rehman, A. and Hassan, M.F. and Hooi, Y.K. and Qureshi, M.A. and Chung, T.D. and Akbar, R. and Safdar, S. (2021) Context and machine learning based trust management framework for internet of vehicles. Computers, Materials and Continua, 68 (3). pp. 4125-4142.

Rizki, M. and Joewono, T.B. and Dharmowijoyo, D.B.E. and Belgiawan, P.F. (2021) Does multitasking improve the travel experience of public transport users? Investigating the activities during commuter travels in the Bandung Metropolitan Area, Indonesia. Public Transport, 13 (2). pp. 429-454.

Rizvi, S.S.H. and Zubair, M. and Ahmad, J. and Hashmani, M. and Khan, M.W. (2021) Wireless Communication as a Reshaping Tool for Internet of Things (IoT) and Internet of Underwater Things (IoUT) Business in Pakistan: A Technical and Financial Review. Wireless Personal Communications, 116 (2). pp. 1087-1105.

Rosli, M.A.F. and Aziz, A.R.A. and Ismael, M.A. and Elbashir, N.O. and Zainal A., E.Z. and Baharom, M. and Mohammed, S.E. (2021) Experimental study of micro-explosion and puffing of gas-to-liquid (GTL) fuel blends by suspended droplet method. Energy, 218 .

Rostami, A. and Yahaya, N. and Soleimani, H. and Rauf, M. and Nyamasvisva, T.E. and Shafie, A. and Khosravi, V. and Ganeson, M. (2021) Source modification for efficiency enhancement of marine controlled-source electromagnetic method. Journal of Geophysics and Engineering, 18 (2). pp. 253-267.

Ruhaizat, N.E. and Yusuf, N.K. and Lajis, M.A. and Mazlan, A.K. and Muktari, A.A. and Ahmad, A. (2021) Effect of Hot Press Forging Parameter on Microstructural Analysis and Mechanical Properties in Direct Recycling of Aluminium Aircraft Alloy (AA7075). Lecture Notes in Mechanical Engineering, 46 . pp. 279-288.

Saad, N. and Dahari, M. (2021) A Controller for Natural Gas Fuel Dispenser with Multi-Level-Pressure Banks. Studies in Systems, Decision and Control, 320 . pp. 25-45.

Saad, S. and Alaloul, W.S. and Ammad, S. and Altaf, M. and Qureshi, A.H. (2021) Identification of critical success factors for the adoption of Industrialized Building System (IBS) in Malaysian construction industry. Ain Shams Engineering Journal .

Saand, A. and Ali, K. and Kumar, A. and Bheel, N. and Keerio, M.A. (2021) Effect of metakaolin developed from natural material Soorh on fresh and hardened properties of self-compacting concrete. Innovative Infrastructure Solutions, 6 (3).

Sabet, M. and Soleimani, H. (2021) The influence of graphene on the mechanical, thermal, and flame retardant characteristics of Polyamide 6. Materials Technology .

Sadrolhosseini, A.R. and Habibiasr, M. and Soleimani, H. and Hamidon, M.N. and Fen, Y.W. and Lim, H.N. (2021) Surface Plasmon Resonance Sensor to Detect n-Hexane in Palm Kernel Oil Using Polypyrrole Nanoparticles Reduced Graphene Oxide Layer. Journal of Sensors, 2021 .

Sadrolhosseini, A.R. and Shafie, S. and Soleimani, H. and Mahdi, M.A. (2021) Polypyrrole-BaFe2O4 sensing layer for detection of strontium ion in aqueous solution using surface plasmon resonance curves fitting. Optics and Laser Technology, 140 .

Saeed, A.A.H. and Harun, N.Y. and Nasef, M.M. and Afolabi, H.K. and Ghaleb, A.A.S. (2021) Removal of cadmium from aqueous solution by optimized magnetic biochar using response surface methodology. Lecture Notes in Civil Engineering, 132 . pp. 119-126.

Saeed, S.M. and Sutanto, M.H. and Napiah, M. and Wong, F. and Bujang, M. (2021) Review on the effect of curing on cold recycled asphalt mixture. Lecture Notes in Civil Engineering, 132 . pp. 1052-1060.

Saeidi, T. and Ismail, I. and Noghanian, S. and Alhawari, A.R.H. and Abbasi, Q.H. and Imran, M.A. and Zeain, M.Y. and Ali, S.M. (2021) High gain triple-band metamaterial-based antipodal vivaldi mimo antenna for 5g communications. Micromachines, 12 (3). pp. 1-25.

Said, M.A. and Dalha, I.B. and Abdul Karim, Z.A. and El-Adawy, M. (2021) Influence of biogas mixing parameters on the combustion and emission characteristics of diesel RCCI engine. Alexandria Engineering Journal .

Sajid, Z. and Karuppanan, S. and Sallih, N. and Kee, K.E. and Shah, S.Z.H. (2021) Role of washer size in mitigating adverse effects of bolt-hole clearance in a single-lap, single-bolt basalt composite joint. Composite Structures, 266 .

Sajjad, M. and Yusoff, M.Z. and Ahmed, M. (2021) A customized floating-point processor design for FPGA and ASIC based thermal compensation in high-precision sensing. Annals of Emerging Technologies in Computing, 5 (1). pp. 40-50.

Sajjad, M. and Yusoff, M.Z. and Yahya, N. and Haider, A.S. (2021) An Efficient VLSI Architecture for FastICA by Using the Algebraic Jacobi Method for EVD. IEEE Access, 9 . pp. 58287-58305.

Salah Alaloul, W. and Al Salaheen, M. and Malkawi, A.B. and Alzubi, K. and Al-Sabaeei, A.M. and Ali Musarat, M. (2021) Utilizing of oil shale ash as a construction material: A systematic review. Construction and Building Materials, 299 .

Samavati, A. and Awang, A. and Samavati, Z. and Fauzi Ismail, A. and Othman, M.H.D. and Velashjerdi, M. and Eisaabadi B., G. and Rostami, A. (2021) Influence of ZnO nanostructure configuration on tailoring the optical bandgap: Theory and experiment. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 263 .

Samavati, A. and Samavati, Z. and Ismail, A.F. and Yahya, N. and Othman, M.H.D. and Rahman, M.A. (2021) Multi aspect investigation of crude oil concentration detecting via optical fiber sensor coated with ZnO/Ag nano-heterostructure. Measurement: Journal of the International Measurement Confederation, 167 .

Samavati, A. and Velashjerdi, M. and Ismail, A.F. and Othman, M.H.D. and Eisaabadi B., G. and Awang, A. and Samavati, Z. and Rostami, A. and Yahya, N. (2021) Continuous monitoring of crude oil movement in an electromagnetic-assisted enhanced oil recovery process using a modified fiber Bragg grating sensor. Sensors and Actuators, A: Physical, 318 .

Samavati, Z. and Samavati, A. and Fauzi Ismail, A. and Yahya, N. and Rahman, M.A. and Hafiz Dzarfan Othman, M. (2021) Role of outer layer configuration on saline concentration sensitivity of optical fiber probe coated with ZnO/Ag nano-heterostructure. Optics and Laser Technology, 136 .

Sangu, S.S. and Illias, N.M. and Ong, C.C. and Gopinath, S.C.B. and Saheed, M.S.M. (2021) MXene-Based Aptasensor: Characterization and High-Performance Voltammetry Detection of Deoxynivalenol. BioNanoScience, 11 (2). pp. 314-323.

Saqib, S. and Mukhtar, A. and Ullah, S. and Sagir, M. and Tahir, M.B. and Amen, R. and Babar, M. and Al-Sehemi, A.G. and Assiri, M.A. and Ibrahim, M. (2021) Biological Methods for Carbon Dioxide Conversion and Utilization. Advances in Science, Technology and Innovation . pp. 165-177.

Sattar, A. and Ahmad, M.N. and Surin, E.S.M. and Mahmood, A.K. (2021) An Improved Methodology for Collaborative Construction of Reusable, Localized, and Shareable Ontology. IEEE Access, 9 . pp. 17463-17484.

Sattar, A. and Ahmad, M.N. and Surin, E.S.M. and Mahmood, A.K. (2021) An improved methodology for collaborative construction of reusable, localized, and shareable ontology. IEEE Access .

Sekhri, K. and Yahiaoui, D. and Harahap, I.S.H. (2021) A sensitivity parameters on inelastic response of interaction soil-pile-structure system under lateral loading. Lecture Notes in Civil Engineering, 132 . pp. 1020-1026.

Shafian, S.R.M. and Saaid, I.M. and Razali, N. and Salleh, I.K. and Irawan, S. (2021) Experimental investigation of colloidal silica nanoparticles (C-SNPs) for fines migration control application. Applied Nanoscience (Switzerland), 11 (7). pp. 1993-2008.

Shafiq, N. and Ammar, M.A. (2021) An experimental assessment on the performance of fly ash in concrete. Lecture Notes in Civil Engineering, 132 . pp. 458-467.

Shafiullah, G.M. and Masola, T. and Samu, R. and Elavarasan, R.M. and Begum, S. and Subramaniam, U. and Romlie, M.F. and Chowdhury, M. and Arif, M.T. (2021) Prospects of Hybrid Renewable Energy-Based Power System: A Case Study, Post Analysis of Chipendeke Micro-Hydro, Zimbabwe. IEEE Access, 9 . pp. 73433-73452.

Shah, S.M.H. and Mustaffa, Z. and Khahro, S.H. and Yusof, K.W. and Al-Qadami, E.H.H. and Ghani, A.A. and Teo, F.Y. (2021) FROUDE NUMBER VARIANCE WITH RESPECT TO THE HYDRODYNAMIC RESPONSE OF A NON-STATIC VEHICLE ON A LOW-LYING FLOODED ROADWAY. IIUM Engineering Journal, 22 (1). pp. 35-46.

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ahmad, F. and Sajid, Z. and Gerard, P. and Sharp, K. (2021) Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading. International Journal of Mechanical Sciences, 189 .

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ud Din, I. and Othman, A.R. and Sharp, K. and Gerard, P. (2021) Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites. Composites Part B: Engineering, 207 .

Shaik, N.B. and Mantrala, K.M. and Bakthavatchalam, B. and Gillani, Q.F. and Rehman, M.F. and Behera, A. and Rajak, D.K. and Pruncu, C.I. (2021) Corrosion Behavior of LENS Deposited CoCrMo Alloy Using Bayesian Regularization-Based Artificial Neural Network (BRANN). Journal of Bio- and Tribo-Corrosion, 7 (3).

Shaik, N.B. and Mantrala, K.M. and Narayana, K.L. (2021) Prediction of corrosion properties of LENSTM deposited cobalt, chromium and molybdenum alloy using artificial neural networks. International Journal of Materials and Product Technology, 62 (1-3). pp. 152-166.

Shaik, N.B. and Pedapati, S.R. and B A Dzubir, F.A. (2021) Remaining useful life prediction of a piping system using artificial neural networks: A case study. Ain Shams Engineering Journal .

Shamim Kaiser, M. and Mahmud, M. and Noor, M.B.T. and Zenia, N.Z. and Mamun, S.A. and Abir Mahmud, K.M. and Azad, S. and Manjunath Aradhya, V.N. and Stephan, P. and Stephan, T. and Kannan, R. and Hanif, M. and Sharmeen, T. and Chen, T. and Hussain, A. (2021) IWorksafe: Towards Healthy Workplaces during COVID-19 with an Intelligent Phealth App for Industrial Settings. IEEE Access, 9 . pp. 13814-13828.

Shamsuddin, R. and Singh, G. and Kok, H.Y. and Hakimi Rosli, M. and Dawi Cahyono, N.A. and Lam, M.K. and Lim, J.W. and Low, A. (2021) Palm Oil Industry�Processes, By-Product Treatment and Value Addition. Advances in Science, Technology and Innovation . pp. 121-143.

Shamsul Ariffin, N.S.F.B. and Ali, M.O.A. (2021) Numerical studies on the stability of offshore wind turbine (Oc5). Lecture Notes in Civil Engineering, 132 . pp. 249-257.

Sheikh, N.A. and Ching, D.L.C. and Abdeljawad, T. and Khan, I. and Jamil, M. and Nisar, K.S. (2021) A fractal-fractional model for the mhd flow of casson fluid in a channel. Computers, Materials and Continua, 67 (2). pp. 1385-1398.

Singh, N. and Elamvazuthi, I. and Nallagownden, P. and Ramasamy, G. and Jangra, A. (2021) Assessment of microgrid communication network performance for medium-scale ieee bus systems using multi-agent system. Lecture Notes in Networks and Systems, 140 . pp. 377-387.

Siyal, A.A. and Shamsuddin, M.R. and Low, A. (2021) Fly ash based geopolymer for the adsorption of cationic and nonionic surfactants from aqueous solution � A feasibility study. Materials Letters, 283 .

Sofian, N.M. and Hashim, A.S. and Sarlan, A. (2021) Analysis of Multimedia Elements Criteria Using AHP Method. Lecture Notes on Data Engineering and Communications Technologies, 72 . pp. 891-902.

Sohail, A. and Dominic, D.D. and Hijji, M. and Butt, M.A. (2021) Competency driven resource evaluation method for business process intelligence. Computers, Materials and Continua, 69 (1). pp. 1141-1157.

Solikin, M. and Falah, M.F. and Sunarjono, S. and Hidayati, N. and Trinugroho, S. and Sutanto, M.H. and Asnan, M.N. (2021) Bending Performance of Half-Slab Styrofoam Mortar with Glazed Nylon Fiber. Civil and Environmental Engineering, 17 (1). pp. 50-57.

Son, N.T. and Jaafar, J. and Aziz, I.A. and Anh, B.N. (2021) Meta-Heuristic Algorithms for Learning Path Recommender at MOOC. IEEE Access, 9 . pp. 59093-59107.

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2021) Influence of in situ postweld heat treatment on microstructure and failure behavior of dual-phase steel resistance spot weld. International Journal of Advanced Manufacturing Technology, 114 (11-12). pp. 3739-3750.

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2021) Optimization of postweld tempering pulse parameters for maximum load bearing and failure energy absorption in dual phase (DP590) steel resistance spot welds. Materials Science and Engineering A, 803 .

Soon, F.K. and Hoon, T.P. and Latheef, M. and Yassin, A.Y.M. (2021) Green's function and finite element formulations for the dynamics of pipeline conveying fluid. Ships and Offshore Structures .

Stonier, A.A. and Chinnaraj, G. and Kannan, R. and Mani, G. (2021) Investigation and validation of an eleven level symmetric modular multilevel inverter using grey wolf optimization and differential evolution control algorithm for solar PV applications. Circuit World, 47 (1). pp. 117-127.

Subhani, N. and Kannan, R. and Mahmud, A. and Blaabjerg, F. (2021) Z-source inverter topologies with switched Z-impedance networks: A review. IET Power Electronics, 14 (4). pp. 727-750.

Sulaiman, S.A. (2021) Overview of geography, socio-economy, energy and environment of the tropical countries. Green Energy and Technology . pp. 1-31.

Sulaiman, S.A. and Abdullah, A.H.B. and Muhammad Yusof, A.B. and Suhaimi, U.N.B. and Dharshana, R. and Nor Hamedi, A.A.B. and Liaw, K.L. (2021) Innovations to reduce air-conditioning energy consumption. Green Energy and Technology . pp. 309-326.

Sumit, S.S. and Rambli, D.R.A. and Mirjalili, S. (2021) Vision-Based Human Detection Techniques: A Descriptive Review. IEEE Access .

Sumit, S.S. and Rambli, D.R.A. and Mirjalili, S. (2021) Vision-Based Human Detection Techniques: A Descriptive Review. IEEE Access, 9 . pp. 42724-42761.

Syahputri, J. and Joewono, T.B. and Rizki, M. and Dharmowijoyo, D.B.E. (2021) Online shopping and travel behaviour based on information and communication technology activity. Lecture Notes in Civil Engineering, 132 . pp. 807-818.

Takaijudin, H. and Osman, M. and Yusof, K.W. and Ghani, A.A. and Weng, G.H. (2021) The effectiveness of cascaded bioretention system in treating urban stormwater runoff. Lecture Notes in Civil Engineering, 132 . pp. 39-46.

Tan, I.T.S. and Nik Hassan, N.M.K. and Min, T.H. (2021) Impact of coastal development on hydrodynamic change of the mangrove coastline in tanjung piai, malaysia. Lecture Notes in Civil Engineering, 132 . pp. 213-220.

Tang, T.B. and Chong, J.S. and Kiguchi, M. and Funane, T. and Lu, C.-K. (2021) Detection of Emotional Sensitivity Using fNIRS Based Dynamic Functional Connectivity. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 29 . pp. 894-904.

Taqvi, S.A.A. and Zabiri, H. and Tufa, L.D. and Uddin, F. and Fatima, S.A. and Maulud, A.S. (2021) A Review on Data-Driven Learning Approaches for Fault Detection and Diagnosis in Chemical Processes. ChemBioEng Reviews, 8 (3). pp. 239-259.

Tariq, A. and Altaf, K. and Ahmad, S.W. and Hussain, G. and Ratlamwala, T.A.H. (2021) Comparative numerical and experimental analysis of thermal and hydraulic performance of improved plate fin heat sinks. Applied Thermal Engineering, 182 .

Tariq, A. and Altaf, K. and Hussain, G. and Reezwan, M. (2021) Plate fin heat sink for the application in solar thermal power. Green Energy and Technology . pp. 115-131.

Teh, C.J.Q. and Drieberg, M. and Soeung, S. and Ahmad, R. (2021) Simple PV Modeling under Variable Operating Conditions. IEEE Access, 9 . pp. 96546-96558.

Teh, H.M. and Silavaraj, T. and Ul Hassan, S.S. and Pereira, E.J. (2021) Investigation on motion responses of a floating wave barrier in a wave flume subjected to regular wave action. Lecture Notes in Civil Engineering, 132 . pp. 281-288.

Thaha, M.A. and Dwipuspita, A.I. and Dharmowijoyo, D.B.E. (2021) S-curve rubble mound breakwater. Lecture Notes in Civil Engineering, 132 . pp. 928-935.

Thangarasu, G. and Dominic, P.D.D. and Subramanian, K. (2021) An Architecture for Intelligent Diagnosing Diabetic Types and Complications Based on Symptoms. Lecture Notes on Data Engineering and Communications Technologies, 72 . pp. 102-110.

Thinakaran, V. and Othman, I. (2021) Factors of safety misconduct affecting safety performance of tall building construction site. Lecture Notes in Civil Engineering, 132 . pp. 620-630.

Tian, S. and Arshad, N.I. and Toghraie, D. and Eftekhari, S.A. and Hekmatifar, M. (2021) Using perceptron feed-forward Artificial Neural Network (ANN) for predicting the thermal conductivity of graphene oxide-Al2O3/water-ethylene glycol hybrid nanofluid. Case Studies in Thermal Engineering, 26 .

Tjaronge, M.W. and Musarat, M.A. and Law, K. and Alaloul, W.S. and Ayub, S. (2021) Effect of graphene oxide on mechanical properties of rubberized concrete: A review. Lecture Notes in Civil Engineering, 132 . pp. 484-492.

Tobi, A.R. and Dennis, J.O. and Zaid, H.M. (2021) Evaluation of low-cost high performance solid-state supercapacitor derived from physically and chemically activated oil palm fiber. Materials Letters, 285 .

Tran, D.C. and Ibrahim, R. and Hussin, F.A. and Omar, M. (2021) Energy-efficient superframe scheduling in industrial wireless networked control system. Lecture Notes in Electrical Engineering, 666 . pp. 1227-1242.

Tudu, S. and Mondal, S.P. and Ahmadian, A. and Mahmood, A.K. and Salahshour, S. and Ferrara, M. (2021) Solution of generalised type � 2 Fuzzy boundary value problem. Alexandria Engineering Journal, 60 (2). pp. 2725-2739.

Tung, S.N. and Jaafar, J.B. and Aziz, I.A. and Nguyen, H.G. and Bui, A.N. (2021) Genetic Algorithm for Solving Multi-Objective Optimization in Examination Timetabling Problem. International Journal of Emerging Technologies in Learning, 16 (11). pp. 4-24.

Tyagi, S. and Uppal, A. and Kumar, R. and Sharma, S. (2021) Disease Detection and Quality Analysis of Fruits and Vegetables. Lecture Notes in Mechanical Engineering . pp. 591-599.

Ul Mustafa, M.R. and Haneef, T. and Jian, B.T.P. and Yusof, K.W. and Khurshid, H. (2021) Optimization study of n-zvi oxidation for organic pollutants removal from wastewater. Lecture Notes in Civil Engineering, 132 . pp. 30-38.

Ullah, S. and Daud, H. and Zainuddin, N. and Dass, S.C. and Khalil, A. and Fanaee, H.T. and Khan, I. (2021) Space-time cluster analysis of accidental oil spills in Rivers State, Nigeria, 2011�2019. Computers, Materials and Continua, 66 (3). pp. 3065-3074.

Ullah, Z. and Nawi, I. and Witjaksono, G. and Tansu, N. and Khattak, M.I. and Junaid, M. and Usman, F. (2021) Electrically enhanced graphene-metal plasmonic antenna for infrared sensing. Optik, 241 .

Ullah, Z. and Qureshi, M.I. and Ahmad, A. and Khan, S.U. and Javaid, M.F. (2021) An experimental study on the mechanical and durability properties assessment of E-waste concrete. Journal of Building Engineering, 38 .

Umar, A.A. and Zawawi, N.A.W.A. and Abdul-Aziz, A.-R. (2021) Malaysian regulators' ranking of PPP contract governance skills. Built Environment Project and Asset Management, 11 (1). pp. 88-102.

Umar, H.A. and Sulaiman, S.A. and Said, M.A. and Gungor, A. and Ahmad, R.K. (2021) An overview of biomass conversion technologies in nigeria. Green Energy and Technology . pp. 133-150.

Umar, U.A. and Shafiq, N. and Ahmad, F.A. (2021) A case study on the effective implementation of the reuse and recycling of construction & demolition waste management practices in Malaysia. Ain Shams Engineering Journal, 12 (1). pp. 283-291.

Umrani, Z.A. and Khatani, M. and Uqaili, M.A. and Mohamed, N.M. and Hamid, N.H. and Chowdhary, B.S. (2021) Dye sensitised solar power generating window: Towards environmentally sustainable energy efficiency in ICT. International Journal of Computer Aided Engineering and Technology, 14 (2). pp. 255-277.

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Abdulrahman, S. and Saeed, S.M. (2021) Irradiated polyethylene terephthalate fiber and binder contents optimization for fiber-reinforced asphalt mix using response surface methodology. Ain Shams Engineering Journal, 12 (1). pp. 271-282.

Usman Kankia, M. and Baloo, L. and Mohammed, B.S. and Hassan, S.B. and Haruna, S. and Danlami, N. and Affiana Ishak, E. and Nurliyana Samahani, W. (2021) Effects of petroleum sludge ash in fly ash-based geopolymer mortar. Construction and Building Materials, 272 .

Utomo, C. and Rahmawati, Y. and Sari, O.L. (2021) Methodology review on multi stakeholders decision of urban market land use. Lecture Notes in Civil Engineering, 132 . pp. 685-692.

Vijaya Bhaskar Reddy, A. and Madhavi, V. and Ahmad, A. and Madhavi, G. (2021) Heavy metals removal using carbon based nanocomposites: Heavy metals adsorption by cbns. Green Energy and Technology . pp. 249-274.

Wahaab, F.A. and Yahya, W. and Adebayo, L.L. and Kazeem, I. and Abdulraheem, A. and Alqasem, B. and Yusuf, J.Y. and Adekoya, A.A. and Mui Nyuk, C. (2021) Graphene@Ni0.5Co0.5Fe2O4 hybrid framework with enhanced interfacial polarization for electromagnetic wave absorption. Journal of Alloys and Compounds, 854 .

Wahab, M.M.A. and Anwar, N.A. and Mohammed, B. and Rahman, A.R.A. and Razak, Z. (2021) Response of corroded offshore structural plate at topsides due to blast loading. Lecture Notes in Civil Engineering, 132 . pp. 318-325.

Wan, F.M. and Amir, A.K. and Pierre, B. and Olivier, D.-D. and Clement, P. and Abdelilah, L. and Faiz, A. (2021) Sliding friction behavior of sintered NI-CR composites with solid lubricants. Key Engineering Materials, 875 KE . pp. 266-271.

Wang, Y. and Sun, X. and Gopinath, S.C.B. and Saheed, M.S.M. and Wang, X. (2021) Thyroglobulin determination on silane�antibody functionalized interdigitated dielectrode surface to diagnose thyroid tumor. Biotechnology and Applied Biochemistry .

Waqas, S. and Bilad, M.R. and Man, Z.B. (2021) Performance and energy consumption evaluation of rotating biological contactor for domestic wastewater treatment. Indonesian Journal of Science and Technology, 6 (1). pp. 101-112.

Waqas, S. and Bilad, M.R. and Man, Z.B. and Suleman, H. and Hadi Nordin, N.A. and Jaafar, J. and Dzarfan Othman, M.H. and Elma, M. (2021) An energy-efficient membrane rotating biological contactor for wastewater treatment. Journal of Cleaner Production, 282 .

Wirzal, M.D.H. and Sathishkumar, P. and Alshahrani, L.A. and Yusoff, A.R.M. and Gu, F.L. and Qureshi, M.S. and Khalid, M. and Khokhar, F.M. (2021) Nifedipine degradation by an electro-oxidation process using titanium-based RuO2�IrO2�TiO2 mixed metal oxide electrode. Chemical Papers, 75 (2). pp. 681-690.

Yahuza, M. and Idris, M.Y.I. and Ahmedy, I.B. and Wahab, A.W.A. and Nandy, T. and Noor, N.M. and Bala, A. (2021) Internet of Drones Security and Privacy Issues: Taxonomy and Open Challenges. IEEE Access, 9 . pp. 57243-57270.

Yaqub, S. and Lal, B. and Md Jalil, A.A.-M.B. and Bharti, A. (2021) Effect of Inulin on the Formation Kinetics of Methane Hydrate. Lecture Notes in Mechanical Engineering . pp. 389-397.

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Hainin, M.R. and Usman, A. and Rafindadi, A.D. and Abdulrahman, S. and Saeed, S.M. (2021) Utilization of Palm Oil Mill Residue as Sustainable Pavement Materials: A Review. International Journal of Integrated Engineering, 13 (3). pp. 66-78.

Yaro, N.S.A. and Napiah, M.B. and Sutanto, M.H. and Usman, A. and Saeed, S.M. (2021) Modeling and optimization of mixing parameters using response surface methodology and characterization of palm oil clinker fine modified bitumen. Construction and Building Materials, 298 .

Yatmar, H. and Ramli, M.I. and Pasra, M. and Gusfiadi, and Dharmowijoyo, D.B.E. (2021) The impact of socio-demographic and activity-travel participation variables on mode choice preference of sub-urban commuters: A case study on the new railway operation in maros-makassar line. Lecture Notes in Civil Engineering, 132 . pp. 945-955.

Yazid, E. and Ng, C.Y. (2021) Identification of time-varying linear and nonlinear impulse response functions using parametric Volterra model from model test data with application to a moored floating structure. Ocean Engineering, 219 .

Yew, G.-Y. and Liew, Z.-S. and Lai, S.-O. and Chew, T.-L. and Teh, H.-M. and Shafiai, S.H. and Lam, M.-K. and Lim, J.-W. and Show, P.-L. and Ho, Y.-C. (2021) Recent advancement of sustainable and renewable energy in osmotic power generation. Engineering Journal, 25 (2). pp. 193-206.

Yusuf, J.Y. and Soleimani, H. and Yahya, N. and Sanusi, Y.K. and Kozlowski, G. and öchsner, A. and Adebayo, L.L. and Wahaab, F.A. and Sikiru, S. and Balogun, B.B. (2021) Electromagnetic wave absorption of coconut fiber-derived porous activated carbon. Boletin de la Sociedad Espanola de Ceramica y Vidrio .

Yusuf, M. and Farooqi, A.S. and Keong, L.K. and Hellgardt, K. and Abdullah, B. (2021) Contemporary trends in composite Ni-based catalysts for CO2 reforming of methane. Chemical Engineering Science, 229 .

Zahid, I. and Ayoub, M. and Abdullah, B.B. and Mukhtar, A. and Saqib, S. and Rafiq, S. and Ullah, S. and Al-Sehemi, A.G. and Farrukh, S. and Danish, M. (2021) Glycerol Conversion to Solketal: Catalyst and Reactor Design, and Factors Affecting the Yield. ChemBioEng Reviews, 8 (3). pp. 227-238.

Zahoor, F. and Hussin, F.A. and Khanday, F.A. and Ahmad, M.R. and Nawi, I.M. and Ooi, C.Y. and Rokhani, F.Z. (2021) Carbon nanotube field effect transistor (Cntfet) and resistive random access memory (rram) based ternary combinational logic circuits. Electronics (Switzerland), 10 (1). pp. 1-20.

Zainal A., E.Z. and Ismael, M.A. and Aziz, A.R.A. and Mohammed, S.E. and Baharom, M.B. and Firmansyah, and Hanif Ibrahim, M. and Sahalan, M.I. and Qawiy, A. (2021) Effect of aspect ratio on frequency and power generation of a free-piston linear generator. Applied Thermal Engineering, 192 .

Zainuddin, Z. and P. Akhir, E.A. and Hasan, M.H. (2021) Predicting machine failure using recurrent neural network-gated recurrent unit (RNN-GRU) through time series data. Bulletin of Electrical Engineering and Informatics, 10 (2). pp. 870-878.

Zakaria, M.S. and Ginta, T.L. and Azmi, A.I. (2021) A Coupled Eulerian Lagrangian (CEL) Model in Prediction Tool Temperature. Lecture Notes in Mechanical Engineering . pp. 1237-1244.

Zakaria, N. (2021) Neuronal Unit of Thoughts (NUTs); AÂ Probabilistic Formalism for Higher-Order Cognition. Lecture Notes in Networks and Systems, 204 . pp. 855-871.

Zakariah, M.N.A. and Roslan, N. and Sulaiman, N. and Lee, S.C.H. and Hamzah, U. and Noh, K.A.M. and Lestari, W. (2021) Gravity analysis for subsurface characterization and depth estimation of Muda River Basin, Kedah, Peninsular Malaysia. Applied Sciences (Switzerland), 11 (14).

Zaman, N.A.B.B.N. and Osman, N.B. and Aqsha, A. (2021) Co-pyrolysis of Empty Fruit Bunches with Palm Kernel Shell, Palm Leaves and Sawdust to Produce Fine Chemicals. Lecture Notes in Mechanical Engineering . pp. 296-302.

Zaman, S.U. and Saif-ur-Rehman, and Zaman, M.K.U. and Rafiq, S. and Arshad, A. and Khurram, M.S. and Irfan, M. and Saqib, S. and Muhammad, N. and Irfan, M. and Sharif, F. and Bustam, M.A. and Jamal, M. and Khan, M.A. and Waseem, M.A. and Mukhtar, A. and Wajeeh, S. (2021) Fabrication and performance evaluation of polymeric membrane using blood compatible hydroxyapatite for artificial kidney application. Artificial Organs .

Zeshan, M.T. and Mustafa, M.R.U. and Yusof, K.W. (2021) Impact of Coir Geotextiles to Reduce Soil Erosion and Surface Runoff. Lecture Notes in Civil Engineering, 139 LN . pp. 93-100.

Zhai, G. and Bao, J. and Ma, Z. and Yang, Y. and Teh, H.M. (2021) A study of the wave impact loads on a fixed column-slab combined structure with a GPU-accelerated SPH method. Ships and Offshore Structures .

Zulfiqar, M. and Sufian, S. and Bahadar, A. and Lashari, N. and Rabat, N.E. and Mansor, N. (2021) Surface-fluorination of TiO2 photocatalysts for remediation of water pollution: A review. Journal of Cleaner Production, 317 .

Zulfiqar, M. and Sufian, S. and Rabat, N.E. and Mansor, N. (2021) Enhancement of adsorption and photocatalytic activities of alkaline-based TiO2 nanotubes for experimental and theoretical investigation under FeCl3 and H2O2. Journal of Water Process Engineering, 39 .

Zulqarnain, and Yusoff, M.H.M. and Ayoub, M. and Hamza Nazir, M. and Zahid, I. and Ameen, M. and Abbas, W. and Shoparwe, N.F. and Abbas, N. (2021) Comprehensive Review on Biodiesel Production from Palm Oil Mill Effluent. ChemBioEng Reviews .

kazmi , B. and Taqvi, S.A.A. and Naqvi, M. and Ilyas, S.U. and Moshin, A. and Inamullah, F. and Naqvi, S.R. (2021) Process system analysis on oil processing facility and economic viability from oil well-to-tank. SN Applied Sciences, 3 (7).

["eprint_typename_conference\_item" not defined]

Abdulkareem, D.F. and Irfan, S. and Padmanabhan, E. (2021) Process parameter, mineralogy, and wettability influence for CO2 adsorption on Terengganu shale samples and their interrogation on improved oil recovery. [["eprint_typename_conference\_item" not defined]]

Al-Ezzi, A. and Yahya, N. and Kamel, N. and Faye, I. and Alsaih, K. and Gunaseli, E. (2021) Social Anxiety Disorder Evaluation using Effective Connectivity Measures: EEG Phase Slope Index Study. [["eprint_typename_conference\_item" not defined]]

Al-Hiyali, M.I. and Yahya, N. and Faye, I. and Khan, Z. and Laboratoire, K.A. (2021) Classification of BOLD FMRI Signals using Wavelet Transform and Transfer Learning for Detection of Autism Spectrum Disorder. [["eprint_typename_conference\_item" not defined]]

Al-Quraishi, M.S. and Elamvazuthi, I. and Tang, T.B. and Al-Qurishi, M. and Parasuraman, S. and Borboni, A. (2021) Lower limb Movements' Classifications using Hemodynamic Response:fNIRS Study. [["eprint_typename_conference\_item" not defined]]

Ameenuddin Irfan, S. and Fadhli, M.Z. and Padmanabhan, E. (2021) Machine learning model to predict the contact of angle using mineralogy, TOC and process parameters in shale. [["eprint_typename_conference\_item" not defined]]

Bingi, K. and Devan, P.A.M. and Prusty, B.R. (2021) Design and Analysis of Fractional Filters with Complex Orders. [["eprint_typename_conference\_item" not defined]]

Ganeson, M. and Padmanabhan, E. (2021) Unraveling hydraulically fractured shale-microbe interaction for biogenic methane enhancement. [["eprint_typename_conference\_item" not defined]]

Isyaku, B. and Abu Bakar, K.B. and Yusuf, M.N. and Mohd Zahid, M.S. (2021) Software defined networking failure recovery with flow table aware and flows classification. [["eprint_typename_conference\_item" not defined]]

Khan, D.M. and Yahya, N. and Kamel, N. (2021) Optimum Order Selection Criterion for Autoregressive Models of Bandlimited EEG Signals. [["eprint_typename_conference\_item" not defined]]

Kit, J.L.O.W. and Asirvadam, V.S. and Hassan, M.F. (2021) Enhanced Ensemble Models for Predictive Modeling: A Conceptual Framework. [["eprint_typename_conference\_item" not defined]]

Kristen Samy, R.R. and Prajapati, S. and Padmanabhan, E. (2021) Geophysical techniques for unconventional fracture characterization. [["eprint_typename_conference\_item" not defined]]

Mohamed Ariff, M.I. and Salleh, K.A. and Mat Yaqin Fadzil, N.A. and Wahab, J.A. and Arshad, N.I. and Azmi, A.Z. (2021) Mobile application recommendation system for mobile data plan research in progress. [["eprint_typename_conference\_item" not defined]]

Mustafa Abro, G.E. and Kumar, R. and Zakaria, Z. and Kumar, S. (2021) Hybrid Control Design for Improvising the Performance of Multi-Tap Variable Shunt Reactors. [["eprint_typename_conference\_item" not defined]]

Prajapati, S. and Padmanabhan, E. (2021) Characterization of shale�s sweet-spots. [["eprint_typename_conference\_item" not defined]]

Ravichandran, T. and Kamel, N. and Al-Ezzi, A.A. and Alsaih, K. and Yahya, N. (2021) Electrooculography-based Eye Movement Classification using Deep Learning Models. [["eprint_typename_conference\_item" not defined]]

Sakib, A.N. and Drieberg, M. and Aziz, A.A. (2021) Energy-Efficient Synchronous MAC Protocol based on QoS and Multi-priority for Wireless Sensor Networks. [["eprint_typename_conference\_item" not defined]]

Syed, I. and Padmanabhan, E. (2021) Assessment of shale gas potential of Paleozoic shales from Western Peninsular Malaysia. [["eprint_typename_conference\_item" not defined]]

This list was generated on Thu Dec 2 22:13:02 2021 MYT.