Logo

Items where Year is 2017

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: . | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z
Number of items: 1188.

.

., Abdul Halim Abdul Latiff, Zulfadhli Mohd Zaki, Siti Nur Fathiyah (2017) Locating Optimum Receiver Position in Seismic Acquisition: Example from Carbonate Region. Locating Optimum Receiver Position in Seismic Acquisition: Example from Carbonate Region .

., Ali Samer Muhsan, Norani M Mohamed, Usman Siddiqui, Muhammad U S (2017) Nano Additives in Water Based Drilling Fluid for Enhanced-Performance Fluid-Loss-Control. Nano Additives in Water Based Drilling Fluid for Enhanced-Performance Fluid-Loss-Control .

A

A Al-Hasani, IM Saaed, AM Salim, HT Janjuhah, . (2017) Advanced Porosity Modeling and Lithology Analysis Based on Sonic Log and Core Data for Arkose Sandstone Reservoir: Habban Field. Advanced Porosity Modeling and Lithology Analysis Based on Sonic Log and Core Data for Arkose Sandstone Reservoir: Habban Field .

A.M., Shariff and Lal, Bhajan (2017) Experimental data, thermodynamic and neural network modeling of CO2 solubility in aqueous sodium salt of L-phenylalanine. Experimental data, thermodynamic and neural network modeling of CO2 solubility in aqueous sodium salt of L-phenylalanine .

AL-Qutami, T.A. and Ibrahim, R. and Ismail, I. and Ishak, M.A. (2017) Development of soft sensor to estimate multiphase flow rates using neural networks and early stopping. International Journal on Smart Sensing and Intelligent Systems, 10 (1). pp. 199-222.

AL-Qutami, T.A. and Ibrahim, R. and Ismail, I. and Ishak, M.A. (2017) Radial basis function network to predict gas flow rate in multiphase flow. ACM International Conference Proceeding Series, Part F . pp. 141-146.

Ab. Rahim, L. and Aliyu, Z. and Mustapha, E.E. (2017) Evaluating the usability of model transformations testing approach (MTTA). Journal of Computer Science, 13 (1). pp. 11-21.

Abbas, S.S. and Nasif, M.S. and Said, M.A.M. and Kadhim, S.K. (2017) Numerical investigation on effect of aortic root geometry on flow induced structural stresses developed in a bileaflet mechanical heart valve. Journal of Physics: Conference Series, 908 (1).

Abbas, S.S. and Shakir Nasif, M. and Meor Said, M.A. and Al-Waked, R. and Khalefa Kadhim, S. (2017) Numerical investigation on effect of leaflet thickness on structural stresses developed in a bileaflet mechanical heart valve for its sustainable manufacturing. MATEC Web of Conferences, 131 .

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2017) Comparison of Energy Absorption of Aluminium-composite Tubes Subjected to Axial Loading. IOP Conference Series: Materials Science and Engineering, 205 (1).

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2017) Effect of composite layers on partially wrapped Al-glass/epoxy hybrid tube subjected to axial load. AIP Conference Proceedings, 1901 .

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2017) Experimental investigation of energy absorption of partially wrapped thin-walled aluminium-glass/epoxy tube subjected to quasi-static loading. Materials Science Forum, 904 MS . pp. 61-67.

Abbas, T. and Ya, H.H. and Zaki, M. (2017) The effect of fiber angles on energy absorption of 50 partially wrapped aluminium-composite hybrid tube under axial crushing : Die Wirkung von Faserwinkeln auf die Energieabsorption von 50 teil-umhülltem Aluminium-Verbund-Hybridrohr unter axialer Stauchung. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 267-272.

Abbasi, A. and Hashim, F.M. (2017) Development of a hydrate formation prediction model for sub-sea pipeline. Petroleum Science and Technology, 35 (5). pp. 443-450.

Abbasi, A.Z. and Ting, D.H. and Hlavacs, H. (2017) Engagement in games: Developing an instrument to measure consumer videogame engagement and its validation. International Journal of Computer Games Technology, 2017 .

Abbasi, A.Z. and Ting, D.H. and Hlavacs, H. (2017) Playful-consumption experience in digital game playing: A scale development. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10507 . pp. 290-296.

Abbasi, I. and Ali, S.S.A. and Ovinis, M. and Naeem, W. (2017) U-model based controller design for an unmanned free swimming submersible (UFSS) vehicle under hydrodynamic disturbances. Indian Journal of Geo-Marine Sciences, 46 (4). pp. 742-748.

Abbasi, S.S. and Min, T.H. and Shafiai, S.H. and Theng, S.Y. and Heng, L.C. (2017) Design enhancement of an Oscillating water column for harnessing of wave energy. ARPN Journal of Engineering and Applied Sciences, 12 (16). pp. 4791-4795.

Abd Aziz, A.R. and Anbese, Y.T. and Hagos, F.Y. and Heikal, M.R. and Firmansyah, (2017) Characteristics of early flame development in a direct-injection spark-ignition cng engine fitted with a variable swirl control valve. Energies, 10 (7).

Abd Kader, S.A. and Putra Jaya, R. and Yaacob, H. and Hainin, M.R. and Abdul Hassan, N. and Wan Ibrahim, M.H. and Ali Mohamed, A. and Ichwana, (2017) Stability and Volumetric Properties of Asphalt Mixture Containing Waste Plastic. MATEC Web of Conferences, 103 .

Abd Karim, Zainal Ambri (2017) Flow characteristics of 3-D turning diffuser using particle image velocimetry. 7TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING (ICME'16) .

Abd Majid, M.A. and Kar Kin, L. (2017) Evaluations of thermocline and half cycle figure of merit of a thermal energy storage tank. MATEC Web of Conferences, 131 .

Abd Rahman, Abdul Hadi and Siddiqui, Numair Ahmed and Chow Weng Sum, Chow (2017) Generic hierarchy of sandstone facies quality and static connectivity: an example from the Middle-Late Miocene Miri Formation, Sarawak Basin, Borneo. Generic hierarchy of sandstone facies quality and static connectivity: an example from the Middle-Late Miocene Miri Formation, Sarawak Basin, Borneo .

Abd.N., Matori (2017) Sub-pixel analysis to enhance the accuracy of evapotranspiration determined using MODIS images. Sub-pixel analysis to enhance the accuracy of evapotranspiration determined using MODIS images .

Abdalla, E.A.H. and Nallagownden, P. and Nor, N.M. and Romlie, M.F. and Abdalsalam, M.E. and Muthuvalu, M.S. (2017) Intelligent approach for optimal energy management of chiller plant using fuzzy and PSO techniques. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Abdalla, I. and Zainal, E.Z.A. and Ramlan, N.A. and Firmansyah, and Aziz, A.R.A. and Heikal, M. (2017) Free piston linear generator for low grid power generation. MATEC Web of Conferences, 131 .

Abdalla, I.I. and Ibrahim, T. and Mohd Nor, N.B. (2017) The fabrication and characterization of short-stroke tubular linear permanent-magnet motor. Lecture Notes in Electrical Engineering, 398 . pp. 777-789.

Abdalla, I.I. and Ibrahim, T. and Nor, N.M. and Perumal, N. (2017) Optimal design of a single-slotted permanent-magnet linear generator for wave energy conversion. International Journal of Applied Electromagnetics and Mechanics, 56 (1). pp. 21-34.

Abdalla, I.I. and Ibrahim, T. and Perumal, N. and Nor, N.M. (2017) Minimization of eddy-current loss in a permanent-magnet tubular linear motor. International Journal on Advanced Science, Engineering and Information Technology, 7 (3). pp. 964-970.

Abdalla, I.I. and Zainal, A.E.Z. and Ramlan, N.A. and Firmansyah, Firmansyah and Aziz, A.R.A. and Heikal, M.R. (2017) Cogging force investigation of a free piston permanent magnet linear generator. IOP Conference Series: Materials Science and Engineering, 257 (1).

Abdalla, I.I. and Zainal A., E.Z. and Anwarudin, A.R.T. and Firmansyah, and Aziz, A.R.A. and Heikal, M.R. (2017) Cogging force issues of permanent magnet linear generator for electric vehicle. Journal of Electrical Systems, 13 (3). pp. 489-502.

Abdalsalam, E. and Yusoff, M.Z. and Kamel, N. and Malik, A.S. and Mahmoud, D. (2017) Classification of four class motor imagery for brain computer interface. Lecture Notes in Electrical Engineering, 398 . pp. 297-305.

Abdelrasoul, Y. and Saman, A.B.S.H. and Sebastian, P. (2017) A quantitative study of tuning ROS gmapping parameters and their effect on performing indoor 2D SLAM. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Garg, S. and Dreisbach, F. and Keong, L.K. and Mellon, N. (2017) Experimental and Neural Network Modeling of Partial Uptake for a Carbon Dioxide/Methane/Water Ternary Mixture on 13X Zeolite. Energy Technology, 5 (8). pp. 1373-1391.

Abdul Latiff, A.H. and Boon Hong, P.G. and Jamaludin, S.N.F. (2017) Improving Vintage Seismic Data Quality through Implementation of Advance Processing Techniques. IOP Conference Series: Earth and Environmental Science, 88 (1).

Abdul Mutalib, Mohamed Ibrahim (2017) Development of QSAR model to predict the ecotoxicity of Vibrio fischeri using COSMO-RS descriptors. . .

Abdul Mutalib, Mohamed Ibrahim (2017) Novel halogen free hydrophobic trioctylammonium-based protic ionic liquids with carboxylate anions: Synthesis, characterization, and thermophysical properties. Novel halogen free hydrophobic trioctylammonium-based protic ionic liquids with carboxylate anions: Synthesis, characterization, and thermophysical properties .

Abdul Mutalib , M I and Yusup, Suzana (2017) Economic analysis and optimization for bio-hydrogen production from oil palm waste via steam gasification. ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY .

Abdul Rani, Ahmad Majdi (2017) Analysis of reconfigurable assembly system framing systems in automotive industry. 2ND INTERNATIONAL CONFERENCE ON AUTOMOTIVE INNOVATION AND GREEN VEHICLE (AIGEV 2016) .

Abdul Wahhab, H. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2017) Characteristics of CNG bubbles in Diesel flow under the influence of the magnetic field. Journal of Applied Fluid Mechanics, 10 (6). pp. 1649-1655.

Abdul Wahhab, H.A. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2017) Mathematical modeling of the flow of diesel-CNG fuel mixture in a pipe under the influence of a magnetic field. Journal of Applied Fluid Mechanics, 10 (1). pp. 389-396.

Abdul-Rani, A.M. and Krishnan, S. and Nagarajan, T. and Rao, T.V.V.L.N. (2017) Inverse kinematics-stewart platform actuated by shape memory alloy for immobilization of ankle-foot rehabilitation. Key Engineering Materials, 724 KE . pp. 105-111.

Abdul-Rani, A.M. and Krishnan, S. and Nagarajan, T. and Rao, T.V.V.L.N. and Ramiah, R. and Ambaraj, W. (2017) Early mobilization using heat treated shape memory alloy (sma) for rehabilitation phases. Key Engineering Materials, 724 KE . pp. 112-116.

Abdul-Rani, A.M. and Nanimina, A.M. and Ginta, T.L. (2017) Surface morphology and corrosion behavior in nano pmedm. Key Engineering Materials, 724 KE . pp. 61-65.

Abdul-Rani, A.M. and Nanimina, A.M. and Ginta, T.L. and Razak, M.A. (2017) Machined Surface Quality in Nano Aluminum Mixed Electrical Discharge Machining. Procedia Manufacturing, 7 . pp. 510-517.

Abdul-Rani, A.M. and Razak, M.A. and Littlefair, G. and Gibson, I. and Nanimina, A.M. (2017) Improving EDM Process on AZ31 Magnesium Alloy towards Sustainable Biodegradable Implant Manufacturing. Procedia Manufacturing, 7 . pp. 504-509.

Abdullah, B. and Adesina, A.A. (2017) Evaluation of gas–liquid mass transfer in gas-induced stirred tank reactor using electrical resistance tomography. Journal of Chemical Technology and Biotechnology, 92 (8). pp. 2123-2133.

Abdullah, Bawadi (2017) Catalysis mechanism of Pd-promoted gamma-alumina in the thermal decomposition of methane to hydrogen: A density functional theory study. . .

Abdullah, Bawadi and Yahya, Noorhana (2017) Scalable bio-friendly method for production of homogeneous metal oxide nanoparticles using green bovine skin gelatin. Scalable bio-friendly method for production of homogeneous metal oxide nanoparticles using green bovine skin gelatin .

Abdullah, H. and Ibrahim, R. and Hassan, S.M. and Chung, T.D. (2017) Filtered feedback PID control for WirelessHART networked plant. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Abdullah, M.A. and Albarody, T.M.B. and Yusoff, P.S.M.B.M. (2017) Utilizing Proton Resonance Frequency of Isotopes Materials for Ultra-Precise Temperature Measurement: A Review. MATEC Web of Conferences, 131 .

Abdullah, M.E. and Abd Kader, S.A. and Putra Jaya, R. and Yaacob, H. and Abdul Hassan, N. and Che Wan, C.N. (2017) Effect of Waste Plastic as Bitumen Modified in Asphalt Mixture. MATEC Web of Conferences, 103 .

Abdullah, M.E. and Ahmad, N.A. and Jaya, R.P. and Hassan, N.A. and Yaacob, H. and Hainin, M.R. (2017) Effects of Waste Plastic on the Physical and Rheological Properties of Bitumen. IOP Conference Series: Materials Science and Engineering, 204 (1).

Abdullah, M.E. and Madzaili, A.H. and Jaya, R.P. and Yaacob, H. and Hassan, N.A. and Nazri, F.M. (2017) Voids characteristics of asphaltic concrete containing coconut shell. IOP Conference Series: Materials Science and Engineering, 222 (1).

Abdullah, M.E. and Rosni, N.N.M. and Jaya, R.P. and Yaacob, H. and Hassan, N.A. and Agussabti, (2017) Effect of charcoal ash coconut shell from waste material at different size on the physical properties of bitumen. Key Engineering Materials, 744 . pp. 121-125.

Abdullah, W.H. and Hakimi, M.H. and Shushan, I.E.-F. and Rahman, A.H.A. (2017) Petroleum source rock characteristics of marine versus coastal settings: A comparative study between Madbi Formation of Masila Basin, Yemen and Nyalau formation of Sarawak, Malaysia. Bulletin of the Geological Society of Malaysia, 63 . pp. 103-115.

Abdulra’Uf, M.Y. and Sulam, M.B. and Merican, A.M. (2017) Exploring the views of Malaysian scholars on knowledge production in the social science. Advanced Science Letters, 23 (9). pp. 8569-8573.

Abdulra’uf, M.Y. and Sulam, M.B. and Merican, A.M. and Wei-Su, (2017) Social science production of Malaysian universities based on the scopus database: A centre-periphery analysis. Advanced Science Letters, 23 (9). pp. 9203-9207.

Abdulwahhab, H.A. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2017) Modeling of diesel- compressed natural gas bubbly flow under influencing of a magnetic field. Journal of Engineering Science and Technology, 12 (7). pp. 1930-1938.

Abdurakhman, Y.B. and Putra, Z.A. and Bilad, M.R. (2017) Aspen HYSYS simulation for biodiesel production from waste cooking oil using membrane reactor. IOP Conference Series: Materials Science and Engineering, 180 (1).

Abdurakhman, Y.B. and Putra, Z.A. and Bilad, M.R. (2017) Process simulation and economic analysis of biodiesel production from waste cooking oil with membrane bioreactor. AIP Conference Proceedings, 1891 .

Abed, S.A. and Rais, H.M. (2017) Hybrid bat algorithm for minimum dominating set problem. Journal of Intelligent and Fuzzy Systems, 33 (4). pp. 2329-2339.

Abouzari-Lotf, E. and Ghassemi, H. and Nasef, M.M. and Ahmad, A. and Zakeri, M. and Ting, T.M. and Abbasi, A. and Mehdipour-Ataei, S. (2017) Phase separated nanofibrous anion exchange membranes with polycationic side chains. Journal of Materials Chemistry A, 5 (29). pp. 15326-15341.

Abualqumboz, M.S. and mohammed, nurul izma and Malakahmad, Dr, Amirhossein, Dr and Nazif, A.N. (2017) Investigating indoor concentrations of PM10 in an underground loading dock in Malaysia. Air Quality, Atmosphere and Health, 10 (2). pp. 147-159.

Abubakar, M.Y. and Jung, L.T. and Zakaria, N. and Younes, A. and Abdel-Aty, A.-H. (2017) Reversible circuit synthesis by genetic programming using dynamic gate libraries. Quantum Information Processing, 16 (6).

Achara, B.E. and Mohammed, B.S. and Nuruddin, M.F. (2017) Optimisation of nano-silica modified self-compacting high-Volume fly ash mortar. IOP Conference Series: Materials Science and Engineering, 201 (1).

Achara, B.E. and Mohammed, B.S. and Nuruddin, M.F. (2017) Properties of Nano-Silica modified self-compacting high-volume fly ash mortar. Journal of Engineering and Applied Sciences, 12 (20). pp. 5294-5300.

Adam, I.K. and Aziz, A.R.A. and Heikal, M.R. and Yusup, S. (2017) Performance and Emission Analysis of Rubber Seed Methyl Ester and Antioxidant in a Multicylinder Diesel Engine. Energy and Fuels, 31 (4). pp. 4424-4435.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Effect of Mineral Filler type on Strength of Roller Compacted Rubbercrete for Pavement Applications. IOP Conference Series: Materials Science and Engineering, 201 (1).

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Effect of polycarboxylate superplasticizer dosage on the mechanical performance of roller compacted Rubbercrete for pavement applications. Journal of Engineering and Applied Sciences, 12 (20). pp. 5253-5260.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Mechanical performance of roller compacted rubbercrete with different mineral filler. Jurnal Teknologi, 79 (6). pp. 75-88.

Addi, M.M. and Abidin, N.A.Z. and Daud, S.A. (2017) Development of a portable phototherapy garment (PPG) for jaundice treatment. IECBES 2016 - IEEE-EMBS Conference on Biomedical Engineering and Sciences . pp. 405-410.

Adha, K. and Wan Yusoff, W.I. and Lubis, L.A. (2017) Investigation of Thermophysical Parameters Properties for Enhancing Overpressure Mechanism Estimation. Case Study: Miri Area, West Baram Delta. IOP Conference Series: Earth and Environmental Science, 88 (1).

Adil, M. and Mohd Zaid, H. and Chuan, L.K. and Ahmad Latiff, N.R. (2017) Effect of EM propagation medium on electrorheological characteristics of dielectric nanofluids. Journal of Dispersion Science and Technology, 38 (4). pp. 570-576.

Adnan, N. and Md Nordin, S. and Rahman, I. and Noor, A. (2017) Adoption of green fertilizer technology among paddy farmers: A possible solution for Malaysian food security. Land Use Policy, 63 . pp. 38-52.

Adnan, N. and Nordin, S.M. and Rahman, I. and Amini, M.H. (2017) A market modeling review study on predicting Malaysian consumer behavior towards widespread adoption of PHEV/EV. Environmental Science and Pollution Research, 24 (22). pp. 17955-17975.

Adnan, N. and Nordin, S.M. and Rahman, I. and Rasli, A.M. (2017) A new era of sustainable transport: An experimental examination on forecasting adoption behavior of EVs among Malaysian consumer. Transportation Research Part A: Policy and Practice, 103 . pp. 279-295.

Affandhie, B.A. and Kurniasari, P.T. and Darmawan, M.S. and Subekti, S. and Wibowo, B. and Husin, N.A. and Bayuaji, R. and Irawan, S. (2017) The effects of bottom ash on setting time and compressive strength of fly ash geopolymer paste. IOP Conference Series: Materials Science and Engineering, 267 (1).

Afolabi, L.O. and Al-Kayiem, H.H. and Aklilu, T.B. (2017) On the nano-additive enhanced flat plate solar collector integrated with thermal energy storage. Nanoscience and Nanotechnology - Asia, 7 (2). pp. 172-182.

Afrooz, I.E. and Sinnathambi, C.M. and Chuang, D.L. and Karuppanan, S. (2017) CFD simulation of bubbling fluidized bed: Effects of bed column geometry on hydrodynamics of gas–solid mixing: Numerische Strömungssimulation einer blasenbildenden Wirbelschicht: Einfluss der Reaktorgeometrie auf die hydrodynamischen Eigenschaften einer Gas-Feststoff Mischung. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 226-234.

Ahmad, A. and Bhat, A.H. and Buang, A. (2017) Immobilized chlorella vulgaris for efficient palm oil mill effluent treatment and heavy metals removal. Desalination and Water Treatment, 81 . pp. 105-117.

Ahmad, Faiz (2017) Physical and Mechanical Properties of Ni-Cr based composites with addition of solid lubricants produced through powder metallurgy process. 9TH INTERNATIONAL UNIMAS STEM ENGINEERING CONFERENCE (ENCON 2016) INNOVATIVE SOLUTIONS FOR ENGINEERING AND TECHNOLOGY CHALLENGES .

Ahmad, M. and Iqbal, O. and Kadir, A.A. (2017) Quantification of Organic richness through wireline logs: A case study of Roseneath shale formation, Cooper basin, Australia. IOP Conference Series: Earth and Environmental Science, 88 (1).

Ahmad, M. and Jung, L.T. and Bhuiyan, A.-A. (2017) A biological inspired fuzzy adaptive window median filter (FAWMF) for enhancing DNA signal processing. Computer Methods and Programs in Biomedicine, 149 . pp. 11-17.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2017) Understanding relationships between learners and game environment of educational games: Hermeneutic approach. International Conference on Research and Innovation in Information Systems, ICRIIS .

Ahmad, P. and Khandaker, M.U. and Muhammad, N. and Rehman, F. and Khan, G. and Rehman, M.A. and Ahmed, S.M. and Gulzar, M. and Numan, A. and Khan, A.S. (2017) Synthesis of multilayered hexagonal boron nitride microcrystals as a potential hydrogen storage element. Ceramics International, 43 (9). pp. 7358-7361.

Ahmad, P. and Khandaker, M.U. and Shah, S.T. and Rehman, F. and Khan, G. and Muhammad, N. and Rehman, M.A. and Khan, A.S. and Ahmed, S.M. and Gulzar, M. and Numan, A. and Ali, H. (2017) Controlled synthesis of anisotropic hexagonal boron nitride nano-web. Materials Science in Semiconductor Processing, 66 . pp. 44-49.

Ahmad, R. and Kamaruddin, S. (2017) Structured maintenance engineering policy development based on a production machine process perspective. Journal of Quality in Maintenance Engineering, 23 (2). pp. 180-194.

Ahmad, R.F. and Malik, A.S. and Kamel, N. and Reza, F. (2017) Machine learning approach for classifying the cognitive states of the human brain with functional magnetic resonance imaging (fMRI). International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Ahmad, R.F. and Malik, A.S. and Kamel, N. and Reza, F. and Amin, H.U. and Hussain, M. (2017) Visual brain activity patterns classification with simultaneous EEG-fMRI: A multimodal approach. Technology and Health Care, 25 (3). pp. 471-485.

Ahmed, A.A. and Saaid, I.M. and Akhir, N.A.M. (2017) Graft Copolymerization of N-Isopropylacrylamide and Acrylic Acid on Bentonite Colloids for In-Depth Fluid Diversion. Energy and Fuels, 31 (4). pp. 3537-3545.

Ahmed, A.Y. and Rabih, A.A.S. and Khir, M.H.M. and Basuwaqi, A.M.A. and Dennis, J.O. (2017) Theoretical modeling and FEA simulation of a CMOS-MEMS resonator. Proceedings of the 2017 IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2017 . pp. 62-66.

Ahmed, K.Y. and Yahaya, N.Z. and Asirvadam, V.S. and Ramani, K. and Ibrahim, O. (2017) Comparison of fuzzy logic control and PI control for a three-level rectifier based on voltage oriented control. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding . pp. 127-132.

Ahmed, K.Y. and Yahaya, N.Z. and Asirvadam, V.S. and Ramani, K. and Shannan, N.M. (2017) Modeling of steady state and transient state of the power electronic distribution transformer. Lecture Notes in Electrical Engineering, 398 . pp. 807-817.

Ahmed, S. and Elraies, K.A. and Forooozesh, J. and Bt Mohd Shafian, S.R. and Hashmet, M.R. and Hsia, I.C.C. and Almansour, A. (2017) Experimental investigation of immiscible supercritical carbon dioxide foam rheology for improved oil recovery. Journal of Earth Science, 28 (5). pp. 835-841.

Ahmed, S. and Elraies, K.A. and Tan, I.M. and Hashmet, M.R. (2017) Experimental investigation of associative polymer performance for CO2 foam enhanced oil recovery. Journal of Petroleum Science and Engineering, 157 . pp. 971-979.

Ahmed, S. and Ramli, A. and Yusup, S. and Farooq, M. (2017) Adsorption behavior of tetraethylenepentamine-functionalized Si-MCM-41 for CO2 adsorption. Chemical Engineering Research and Design, 122 . pp. 33-42.

Ahmed Ali Hassan Taha, Abdel Hadi Abd Rahman, Wan Yusoff Wan Ism, . (2017) Core Lithofacies Analysis of Reservoir Interval (Albian—Cenomanian) Bentiu Formation of SE Muglad Basin, Sudan. Core Lithofacies Analysis of Reservoir Interval (Albian—Cenomanian) Bentiu Formation of SE Muglad Basin, Sudan .

Ahmed Kabir, I.F.S. and Kanagalingam, S. and Safiyullah, F. (2017) Performance evaluation of air flow and thermal comfort in the room with Wind-Catcher using different CFD techniques under neutral Atmospheric Boundary Layer. Energy Procedia, 143 . pp. 199-203.

Ahmed Mohamed Ahmed Salim, Berihun Mamo Negash, Abubaker Mohamed, . (2017) A Diagenetic Facies Model for Characterizing Yanan Formation, Ordos Basin, North Central China. A Diagenetic Facies Model for Characterizing Yanan Formation, Ordos Basin, North Central China .

Ahmed Salim, Ahmed Mohamed and Ghosh, Deva Prasad (2017) Quantitative interpretation of carbonate reservoir rock using wireline logs: a case study from Central Luconia, offshore Sarawak, Malaysia. Quantitative interpretation of carbonate reservoir rock using wireline logs: a case study from Central Luconia, offshore Sarawak, Malaysia .

Ahmed Siddiqui, Numair (2017) Early Cenozoic rapid flight enigma of the Indian subcontinent resolved: Roles of topographic top loading and subcrustal erosion. GEOSCIENCE FRONTIERS .

Ahsan, S. and Alemu Lemma, T. (2017) Remaining Useful Life Prediction of Gas Turbine Engine using Autoregressive Model. MATEC Web of Conferences, 131 .

Ajam, A. and Aziz, A.A. and Asirvadam, V.S. and Izhar, L.I. and Muda, S. (2017) Cerebral vessel enhancement using bilateral and Hessian-based filter. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Ajam, A. and Aziz, A.A. and Asirvadam, V.S. and Muda, A.S. and Faye, I. and Safdar Gardezi, S.J. (2017) A Review on Segmentation and Modeling of Cerebral Vasculature for Surgical Planning. IEEE Access, 5 . pp. 15222-15240.

Akbar, A. and Mokhtar, A.A.B. (2017) Integrating Life Cycle Costing (LCC) and Life Cycle Assessment (LCA) Model for Selection of Centralized Chilled Water Generation - Review Paper. MATEC Web of Conferences, 131 .

Akbar, R. and Hassan, M.F. and Abdullah, A. (2017) A meta-model of software development project states behavioral study of software projects. Journal of Software: Evolution and Process, 29 (4).

Akbari, S. and Mahmood, S.M. and Tan, I.M. and Bharadwaj, A.M. and Hematpour, H. (2017) Experimental investigation of the effect of different process variables on the viscosity of sulfonated polyacrylamide copolymers. Journal of Petroleum Exploration and Production Technology, 7 (1). pp. 87-101.

Akbari, S. and Mahmood, S.M. and Tan, I.M. and Ling, O.L. and Ghaedi, H. (2017) Effect of aging, antioxidant, and mono- and divalent ions at high temperature on the rheology of new polyacrylamide-based co-polymers. Polymers, 9 (10).

Akhir, E.A.P. and Hughes, R.T. and Cox, K. (2017) Information model to support sustainable procurement. International Conference on Research and Innovation in Information Systems, ICRIIS .

Akhtar, S. and Khan, M.N. and Kurnia, J.C. and Shamim, T. (2017) Investigation of energy conversion and flame stability in a curved micro-combustor for thermo-photovoltaic (TPV) applications. Applied Energy, 192 . pp. 134-145.

Akilu, S. and Baheta, A.T. and Minea, A.A. and Sharma, K.V. (2017) Rheology and thermal conductivity of non-porous silica (SiO2) in viscous glycerol and ethylene glycol based nanofluids. International Communications in Heat and Mass Transfer, 88 . pp. 245-253.

Akilu, S. and Baheta, A.T. and Sharma, K.V. (2017) Experimental measurements of thermal conductivity and viscosity of ethylene glycol-based hybrid nanofluid with TiO2-CuO/C inclusions. Journal of Molecular Liquids, 246 . pp. 396-405.

Al Kaisy, G.M.J. and Abdul Mutalib, M.I. and Rao, T.V.V.L.N. (2017) Novel halogen free hydrophobic trioctylammonium-based protic ionic liquids with carboxylate anions: Synthesis, characterization, and thermophysical properties. Journal of Molecular Liquids, 242 . pp. 349-356.

Al Kaisy, G.M.J. and Mutalib, M.I.A. and Leveque, J.M. and Rao, T.V.V.L.N. (2017) Novel low viscosity ammonium-based ionic liquids with carboxylate anions: Synthesis, characterization, and thermophysical properties. Journal of Molecular Liquids, 230 . pp. 565-573.

Al-Azawiey, S.S. and Al-Kayiem, H.H. and Hassan, S.B. (2017) On the Influence of Collector Size on the Solar Chimneys Performance. MATEC Web of Conferences, 131 .

Al-Kayiem, H.H. and Ekhwan, A.B. and Muhi, L.N. (2017) Augmentation of ribs turbulators height on the hydrothermal performance of double pipe heat exchanger. Journal of Engineering Science and Technology, 12 (2). pp. 548-563.

Al-Kayiem, H.H. and Gilani, S.I.U. and Abdalfatah, M.S. (2017) Experimental investigation of zero energy office under natural and forced ventilation. MATEC Web of Conferences, 131 .

Al-Kayiem, H.H. and Khan, J.A. (2017) Evaluation of Alkali/Surfactant/Polymer Flooding on Separation and Stabilization of Water/Oil Emulsion by Statistical Modeling. Energy and Fuels, 31 (9). pp. 9290-9301.

Al-Kayiem, H.H. and Ning, W. and Mokhlif, N.D. (2017) Characterisation of paraffinic compositions in crude oils. International Journal of Oil, Gas and Coal Technology, 15 (2). pp. 152-165.

Al-Shargie, F. and Tang, T.B. and Badruddin, N. and Dass, S.C. and Kiguchi, M. (2017) Mental stress assessment based on feature level fusion of fNIRS and EEG signals. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Al-Shargie, F. and Tang, T.B. and Kiguchi, M. (2017) Assessment of mental stress effects on prefrontal cortical activities using canonical correlation analysis: An fNIRS-EEG study. Biomedical Optics Express, 8 (5). pp. 2583-2598.

Al-Shargie, F. and Tang, T.B. and Kiguchi, M. (2017) Stress Assessment Based on Decision Fusion of EEG and fNIRS Signals. IEEE Access, 5 . pp. 19889-19896.

Al-Swai, B.M. and Osman, N.B. and Abdullah, B. (2017) Catalytic performance of Ni/MgO catalyst in methane dry reforming. AIP Conference Proceedings, 1891 .

Al-Waked, R. and Nasif, M.S. and Groenhout, N. and Partridge, L. (2017) Energy performance and CO2 emissions of HVAC systems in commercial buildings. Buildings, 7 (4).

Alashloo, S.Y.M. and Ghosh, D.P. and Bashir, Y. and Yusoff, W.I.W. (2017) Depth Imaging Enhancement Using Reverse Time Migration. IOP Conference Series: Earth and Environmental Science, 88 (1).

Aldabbagh, G. and Shah, P.A. and Hasbullah, H.B. and Aadil, F. and Awan, K.M. and Marwat, F. (2017) Fuzzy logic based enhanced AOMDV with link status classification for efficient multi-path routing in multi-hop wireless networks. Journal of Computational and Theoretical Nanoscience, 14 (1). pp. 620-630.

Aleem, W. and Mellon, N. (2017) New relation between viscosity and surface tension for pure hydrocarbon liquids. Petroleum Science and Technology, 35 (4). pp. 338-344.

Alhussian, H.S.A. and Zakaria, M.N.B. and Hussin, F.A.B. (2017) Minimizing scheduling overhead in LRE-TL real-time multiprocessor scheduling algorithm. Turkish Journal of Electrical Engineering and Computer Sciences, 25 (1). pp. 263-277.

Ali, A. and Mohd Nor, N. and Ibrahim, T. and Fakhizan Romlie, M. (2017) Sizing and placement of battery-coupled distributed photovoltaic generations. Journal of Renewable and Sustainable Energy, 9 (5).

Ali, A.A. and Dominic, P.D.D. (2017) The relationship between management support and individual motivation for knowledge sharing practice. International Conference on Research and Innovation in Information Systems, ICRIIS .

Ali, A.M. and Padmanabhan, E. and Baioumy, H. (2017) Characterization of Alkali-Induced Quartz Dissolution Rates and Morphologies. Arabian Journal for Science and Engineering, 42 (6). pp. 2501-2513.

Ali, E.M. and Yahaya, N.Z. and Perumal, N. and Zakariya, M.A. (2017) Design of microstrip patch antenna at 900 MHz for charging mobile applications. Journal of Engineering and Applied Sciences, 12 (4). pp. 988-993.

Ali, L. and Islam, S. and Gul, T. and Khan, I. and Dennis, L.C.C. and Khan, W. and Khan, A. (2017) The brownian and thermophoretic analysis of the non-Newtonian Williamson fluid flow of thin film in a Porous Space over an unstable stretching surface. Applied Sciences (Switzerland), 7 (4).

Ali, M. and Khan, S.A. and Sheikh, N.A. and Gilani, S.I.-U.-H. and Shehryar, M. and Ali, H.M. and Rashid, T.U. (2017) Performance analysis of a low capacity solar tower water heating system in climate of Pakistan. Energy and Buildings, 143 . pp. 84-99.

Ali, M.K.M. and Fudholi, A. and Muthuvalu, M.S. and Sulaiman, J. and Yasir, S.M. (2017) Implications of drying temperature and humidity on the drying kinetics of seaweed. AIP Conference Proceedings, 1905 .

Ali, M.K.M. and Sulaiman, J. and Yasir, S.M. and Ruslan, M.H. and Fudholi, A. and Muthuvalu, M.S. and Ramu, V. (2017) Cubic spline as a powerful tools for processing experimental drying rate data of seaweed using solar drier. Malaysian Journal of Mathematical Sciences, 11 (S). pp. 159-172.

Ali, S. and Zabidi, N.A.M. and Al-Marri, M.J. and Khader, M.M. (2017) Effect of the support on physicochemical properties and catalytic performance of cobalt based nano-catalysts in Fischer-Tropsch reaction. Materials Today Communications, 10 . pp. 67-71.

Ali, S.S.A. and Kannan, R. and Kumar, M.S. (2017) Exploration of Modulation Index in Multi-level Inverter using Particle Swarm Optimization Algorithm. Procedia Computer Science, 105 . pp. 144-152.

Ali, W. and Abdullah, A. and Azam, M. (2017) The dynamic relationship between structural change and CO2 emissions in Malaysia: a cointegrating approach. Environmental Science and Pollution Research, 24 (14). pp. 12723-12739.

Ali, Z. and Alsulaiman, M. and Muhammad, G. and Elamvazuthi, I. and Al-nasheri, A. and Mesallam, T.A. and Farahat, M. and Malki, K.H. (2017) Intra- and Inter-database Study for Arabic, English, and German Databases: Do Conventional Speech Features Detect Voice Pathology? Journal of Voice, 31 (3). 386.e1-386.e8.

Alipour Moghadam Esfahani, R. and Osmieri, L. and Specchia, S. and Yusup, S. and Tavasoli, A. and Zamaniyan, A. (2017) H2-rich syngas production through mixed residual biomass and HDPE waste via integrated catalytic gasification and tar cracking plus bio-char upgrading. Chemical Engineering Journal, 308 . pp. 578-587.

Aliyu, A.A.A. and Rohani, J.M. and Rani, A.M.A. and Musa, H. (2017) Optimization of electrical discharge machining parameters of SiSiC through response surface methodology. Jurnal Teknologi, 79 (1). pp. 119-129.

Alnarabiji, M.S. and Yahya, N. and Hamed, Y. and Ardakani, S.E.M. and Mohd Azizi, K.A. and Klemeš, J.J. and Abdullah, B. and Tasfy, S.F.H. and Hamid, S.B.A. and Nashed, O. (2017) Scalable bio-friendly method for production of homogeneous metal oxide nanoparticles using green bovine skin gelatin. Journal of Cleaner Production, 162 . pp. 186-194.

Alqasem, B. and Yahya, N. and Qureshi, S. and Irfan, M. and Ur Rehman, Z. and Soleimani, H. (2017) The enhancement of the magnetic properties of α-Fe2O3 nanocatalyst using an external magnetic field for the production of green ammonia. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 217 . pp. 49-62.

Altaf, K. and Zulkarnain, A.F. and Qayyum, J.A. and Jahanzaib, M. (2017) Optimum build orientation OF3D printed parts for a robot gripper. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5772-5777.

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H.B. and Sebastian, P. (2017) Camera coverage prioritization to support security monitoring. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H.B. and Sebastian, P. and Saad, N.B. and Ibrahim, R.B. and Dass, S.C. (2017) Optimizing Visual Surveillance Sensor Coverage Using Dynamic Programming. IEEE Sensors Journal, 17 (11). pp. 3398-3405.

Altam, R.A. and Lemma, T.A. and Jufar, S.R. (2017) Trends in Supersonic Separator design development. MATEC Web of Conferences, 131 .

Alzahrani, S.K. and Ghazali, Z.B. and Kaur, S. (2017) Learning organization as a moderator of the relationship between knowledge creation and adaptability in international joint venture. International Journal of Applied Business and Economic Research, 15 (18). pp. 387-395.

Ameen, M. and Azizan, M.T. and Yusup, S. and Ramli, A. (2017) Hydroprocessing of rubber seed oil over Ni-Mo/γ-Al2O3 for the green diesel production. Chemical Engineering Transactions, 61 . pp. 1843-1848.

Aminu, M. and Matori, A.N. and Yusof, K.W. and Malakahmad, A. and Zainol, R.B. (2017) Analytic network process (ANP)-based spatial decision support system (SDSS) for sustainable tourism planning in Cameron Highlands, Malaysia. Arabian Journal of Geosciences, 10 (13).

Amir, N. and Abidin, K.A.Z. and Shiri, F.B.M. (2017) Effects of Fibre Configuration on Mechanical Properties of Banana Fibre/PP/MAPP Natural Fibre Reinforced Polymer Composite. Procedia Engineering, 184 . pp. 573-580.

Anak Penguang, A.S. and Lubis, L.A. and Hermana, M. and Ghosh, D.P. (2017) Study of Rock Physics and Seismic Attributes of Hydrocarbon Reservoirs in Sabah Basin. IOP Conference Series: Earth and Environmental Science, 88 (1).

Anbese, Yohannes T. and Abd. Aziz , Abd. Rashid and Heikal , Morgan Raymond (2017) Characteristics of Early Flame Development in a Direct-Injection Spark-Ignition CNG Engine Fitted with a Variable Swirl Control Valve. Characteristics of Early Flame Development in a Direct-Injection Spark-Ignition CNG Engine Fitted with a Variable Swirl Control Valve .

Andarany, K.S. and Sagir, A. and Ahmad, A. and Deni, S.K. and Gunawan, W. (2017) Cellulose acetate layer effect toward aluminium corrosion rate in hydrochloric acid media. IOP Conference Series: Materials Science and Engineering, 237 (1).

Andriamihaja, S. and Padmanabhan, E. (2017) characterization of pore system changes induced by dissolution in carbonate rocks. Petroleum and Coal, 59 (5). pp. 582-589.

Anwer, A. and Ali, S.S.A. and Khan, A. and Meriaudeau, F. (2017) Real-time underwater 3D scene reconstruction using commercial depth sensor. USYS 2016 - 2016 IEEE 6th International Conference on Underwater System Technology: Theory and Applications . pp. 67-70.

Anwer, A. and Ali, S.S.A. and Khan, A. and Mériaudeau, F. (2017) Underwater 3D scanning using Kinect v2 time of flight camera. Proceedings of SPIE - The International Society for Optical Engineering, 10338 .

Anwer, A. and Ali, S.S.A. and Meriaudeau, F. (2017) Underwater online 3D mapping and scene reconstruction using low cost kinect RGB-D sensor. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Anwer, A. and Azhar Ali, S.S. and Khan, A. and Meriaudeau, F. (2017) Underwater 3-D Scene Reconstruction Using Kinect v2 Based on Physical Models for Refraction and Time of Flight Correction. IEEE Access, 5 . pp. 15960-15970.

Aqsha, A. and Tijani, M.M. and Moghtaderi, B. and Mahinpey, N. (2017) Catalytic pyrolysis of straw biomasses (wheat, flax, oat and barley) and the comparison of their product yields. Journal of Analytical and Applied Pyrolysis, 125 . pp. 201-208.

Arozi, M. and Putri, F.T. and Ariyanto, M. and Caesarendra, W. and Widyotriatmo, A. and Munadi, and Setiawan, J.D. (2017) Electromyography (EMG) signal recognition using combined discrete wavelet transform based on Artificial Neural Network (ANN). 2016 2nd International Conference of Industrial, Mechanical, Electrical, and Chemical Engineering, ICIMECE 2016 . pp. 95-99.

Arshad, H. and Sulaiman, S.A. and Hussain, Z. and Naz, Y. and Basrawi, F. (2017) Microwave assisted pyrolysis of plastic waste for production of fuels: A review. MATEC Web of Conferences, 131 .

Asaad, M.A. and Ismail, M. and Raja, P.B. and Khalid, N.H.A. (2017) Rhizophora Apiculata As Eco-Friendly Inhibitor Against Mild Steel Corrosion in 1 M HCL. Surface Review and Letters, 24 .

Assagaf, A. and Yusoff, Y.M. and Hassan, R. (2017) Government subsidy, strategic profitability and its impact on financial performance: Empirical evidence from Indonesia. Investment Management and Financial Innovations, 14 (3). pp. 135-147.

Atnaw, S.M. and Sulaiman, S.A. and Singh, L. and Wahid, Z.A. and Yahya, C.K.M.F.B.C.K. (2017) Modeling and parametric study for maximizing heating value of gasification syngas. BioResources, 12 (2). pp. 2548-2564.

Aulia, A. and Jeong, D. and Mohd Saaid, I. and Shuker, M.T. and El-Khatib, N.A. (2017) A new history matching sensitivity analysis framework with random forests and Plackett-Burman design. Society of Petroleum Engineers - SPE Symposium: Production Enhancement and Cost Optimisation 2017 .

Aurybi, M.A. and Al-Kayiem, H.H. and Gilani, S.I.U. and Ismaeel, A.A. (2017) Numerical analysis of solar updraft power plant integrated with external heat source. MATEC Web of Conferences, 131 .

Awad, A. and Salam, A. and Abdullah, B. (2017) Hydrogen production by decomposition of methane and methanol mixture over Ni-Pd/Al2O3. Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 96 (10). pp. 445-450.

Awad, A. and Salam, A. and Abdullah, B. (2017) Thermocatalytic decomposition of methane/methanol mixture for hydrogen production: Effect of nickel loadings on alumina support. AIP Conference Proceedings, 1891 .

Awais, M. and Badruddin, N. and Drieberg, M. (2017) A hybrid approach to detect driver drowsiness utilizing physiological signals to improve system performance and Wearability. Sensors (Switzerland), 17 (9).

Awang, A. and Husain, K. and Kamel, N. and Aissa, S. (2017) Routing in Vehicular Ad-hoc Networks: A Survey on Single- and Cross-Layer Design Techniques, and Perspectives. IEEE Access, 5 . pp. 9497-9517.

Awang, Mariyamni (2017) Box-Behnken design for assessment proxy model of miscible CO2-WAG in heterogeneous clastic reservoir. Box-Behnken design for assessment proxy model of miscible CO2-WAG in heterogeneous clastic reservoir .

Awang, Mariyamni (2017) Field-scale investigation of different miscible CO2-injection modes to improve oil recovery in a clastic highly heterogeneous reservoir. . .

Axinte, E. and Bofu, A. and Wang, Y. and Abdul-Rani, A.M. and Aliyu, A.A.A. (2017) An overview on the conventional and nonconventional methods for manufacturing the metallic glasses. MATEC Web of Conferences, 112 .

Ayilara, A.Q. and Liew, M.S. (2017) Impact of the Overloading of Heavy Goods Vehicles on the Fatigue Life of Steel Bridges. Structures Congress 2017: Bridges and Transportation Structures - Selected Papers from the Structures Congress 2017 . pp. 434-445.

Ayinla, H.A. and Abdullah, W.H. and Makeen, Y.M. and Abubakar, M.B. and Jauro, A. and Sarki Yandoka, B.M. and Mustapha, K.A. and Zainal Abidin, N.S. (2017) Source rock characteristics, depositional setting and hydrocarbon generation potential of Cretaceous coals and organic rich mudstones from Gombe Formation, Gongola Sub-basin, Northern Benue Trough, NE Nigeria. International Journal of Coal Geology, 173 . pp. 212-226.

Ayinla, H.A. and Abdullah, W.H. and Makeen, Y.M. and Abubakar, M.B. and Jauro, A. and Sarki Yandoka, B.M. and Zainal Abidin, N.S. (2017) Petrographic and geochemical characterization of the Upper Cretaceous coal and mudstones of Gombe Formation, Gongola sub-basin, northern Benue trough Nigeria: Implication for organic matter preservation, paleodepositional environment and tectonic settings. International Journal of Coal Geology, 180 . pp. 67-82.

Ayob, F.B. and Hussain, P.B. and Abdullah, A.B. and Aziz, A. (2017) Preliminary study on diffusion welding of marine grades grey cast iron to low carbon steel. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3357-3362.

Ayodele, O.B. (2017) Eliminating reverse water gas shift reaction in CO2 hydrogenation to primary oxygenates over MFI-type zeolite supported Cu/ZnO nanocatalysts. Journal of CO2 Utilization, 20 . pp. 368-377.

Ayodele, O.B. and Tasfy, S.F.H. and Zabidi, N.A.M. and Uemura, Y. (2017) Co-synthesis of methanol and methyl formate from CO2 hydrogenation over oxalate ligand functionalized ZSM-5 supported Cu/ZnO catalyst. Journal of CO2 Utilization, 17 .

Ayoub, M. and Bhat, A.H. and Ullah, S. and Ahmad, M. and Uemura, Y. (2017) Optimization of biodiesel production over alkaline modified clay catalyst. Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 96 (10). pp. 456-462.

Ayoub, M. and Sufian, S. and Hailegiorgis, S.M. and Ullah, S. and Uemura, Y. (2017) Conversion of glycerol to polyglycerol over waste duck-bones as a catalyst in solvent free etherification process. IOP Conference Series: Materials Science and Engineering, 226 (1).

Ayoub, Muhammad (2017) Simulation for the Production of Synthetic Natural Gas for vehicles (SNGV) from Palm Waste via Gasification with In-Situ CO2 Capture. 2017 7TH INTERNATIONAL CONFERENCE ON MODELING, SIMULATION, AND APPLIED OPTIMIZATION (ICMSAO) .

Azahari, I.N.N.A. and Wan Ahmad, W.F. and Hashim, A.S. and Jamaludin, Z. (2017) User experience of autism social-aid among autistic children: AUTISM social aid application. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10645 . pp. 391-397.

Azarpour, A. and Alwi, S.R.W. (2017) Prediction of industrial catalysts deactivation rate using first principle model and operating data Ramalan kadar penyahaktifan mangkin industri menggunakan model prinsip pertama dan data operasi. Malaysian Journal of Analytical Sciences, 21 (1). pp. 204-212.

Azarpour, A. and Mutalib, M.I.A. and Mahadzir, S. and Ramli, A. (2017) Analysis of Hydrodynamic Parameters Effect on the Hydropurification Reactor Operation through Numerical Simulation. Procedia Engineering, 184 . pp. 318-325.

Azarpour, A. and N.G. Borhani, T. and R. Wan Alwi, S. and A. Manan, Z. and I. Abdul Mutalib, M. (2017) A generic hybrid model development for process analysis of industrial fixed-bed catalytic reactors. Chemical Engineering Research and Design, 117 . pp. 149-167.

Azeem, B. and KuShaari, K. and Man, Z. and Irfan, S.A. and Trinh, T.H. (2017) Tumbling fluidized-bed process parameters affecting quality of biopolymer coating on surface of pristine urea particles. Powder Technology, 320 . pp. 714-725.

Azeem, B. and KuShaari, K. and Man, Z. and Trinh, T.H. (2017) Nutrient release characteristics and coating homogeneity of biopolymer coated urea as a function of fluidized bed process variables. Canadian Journal of Chemical Engineering, 95 (5). pp. 849-862.

Aziz, A. Rashid A. (2017) Combined effect of boost pressure and injection timing on the performance and combustion of CNG in a DI spark ignition engine. International Journal of Automotive Technology .

Aziz, H.A. and Shariff, A.M. and Rusli, R. (2017) Interrelations between process safety management elements. Process Safety Progress, 36 (1). pp. 74-80.

Aziz, N. and Rahman, N.A. (2017) Use of ICT in indigenous primary school classroom: A case study of teachers' expectations and experiences. International Conference on Research and Innovation in Information Systems, ICRIIS .

Azizo, A.S. and Wirzal, M.D.H. and Bilad, M.R. and Yusoff, A.R.M. (2017) Assessment of nylon 6, 6 nanofibre membrane for microalgae harvesting. AIP Conference Proceedings, 1891 .

Azman, N.I. and Jamaludin, S.N.F. (2017) Relationship of oil seep in Kudat Peninsula with surrounding rocks based on geochemical analysis. IOP Conference Series: Earth and Environmental Science, 88 (1).

Azmee, N.M. and Nuruddin, M.F. (2017) Impact performance of low cement Ultra-high-performance concrete. WIT Transactions on Ecology and the Environment, 223 . pp. 481-488.

Azmi, N. and Yusup, S. and Sabil, K.M. (2017) CO2 sorption on mesoporous solids: Effect of temperature and water content. Journal of Chemical and Engineering Data, 62 (1). pp. 456-462.

abdullah, azrai (2017) The dynamic relationship between structural change and CO2 emissions in Malaysia: a cointegrating approach. The dynamic relationship between structural change and CO2 emissions in Malaysia: a cointegrating approach .

B

Babiker, A. and Faye, I. and Malik, A. (2017) Investigation of situational interest effects on learning using physiological sensors: Preliminary result. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Baharudin, Zuhairi (2017) An intelligent hybrid short-term load forecasting model for smart power grids. An intelligent hybrid short-term load forecasting model for smart power grids .

Baheta, Aklilu Tesfamichael (2017) Rheology and thermal conductivity of non-porous silica (SiO2) in viscous glycerol and ethylene glycol based nanofluids. Rheology and thermal conductivity of non-porous silica (SiO2) in viscous glycerol and ethylene glycol based nanofluids .

Bahloul, M.R. and Yusoff, M.Z. and Abdel, A.-H. and Naufal, M.M.S. and Kudsi, L. (2017) Spectrum sensing for cognitive radio systems using modulation classification: A review. Applied Mathematics and Information Sciences, 11 (3). pp. 857-865.

Baig, Z. and Mamat, O. and Mustapha, M. and Sarfraz, M. (2017) Influence of surfactant type on the dispersion state and properties of graphene nanoplatelets reinforced aluminium matrix nanocomposites. Fullerenes Nanotubes and Carbon Nanostructures, 25 (9). pp. 545-557.

Baioumy, H. and Lehmann, B. (2017) Anomalous enrichment of redox-sensitive trace elements in the marine black shales from the Duwi Formation, Egypt: Evidence for the late Cretaceous Tethys anoxia. Journal of African Earth Sciences, 133 . pp. 7-14.

Baioumy, H. and Omran, M. and Fabritius, T. (2017) Mineralogy, geochemistry and the origin of high-phosphorus oolitic iron ores of Aswan, Egypt. Ore Geology Reviews, 80 . pp. 185-199.

Baioumy, Hassan Mohamed (2017) Anomalous enrichment of redox-sensitive trace elements in the marine black shales from the Duwi Formation, Egypt: Evidence for the late Cretaceous Tethys anoxia. Anomalous enrichment of redox-sensitive trace elements in the marine black shales from the Duwi Formation, Egypt: Evidence for the late Cretaceous Tethys anoxia .

Bala, N. and Kamaruddin, I. and Napiah, M. (2017) The influence of polymer on rheological and thermo oxidative aging properties of modified bitumen binders. Jurnal Teknologi, 79 (6). pp. 61-73.

Bala, N. and Kamaruddin, I. and Napiah, M. and Danlami, N. (2017) Rheological and rutting evaluation of composite nanosilica/polyethylene modified bitumen. IOP Conference Series: Materials Science and Engineering, 201 (1).

Bala, N. and Napiah, M. and Kamaruddin, I. (2017) Application of Response Surface Methodology for mix design optimization of nanocomposite modified asphalt mixtures. International Journal of GEOMATE, 13 (39). pp. 237-244.

Bala, N. and Napiah, M. and Kamaruddin, I. (2017) Performance evaluation of composite asphalt mixture modified with polyethylene and nanosilica. International Journal of Civil Engineering and Technology, 8 (9). pp. 616-628.

Balogun, A.-L. and Matori, A.-N. and Hamid-Mosaku, A.I. and Umar Lawal, D. and Ahmed Chandio, I. (2017) Fuzzy MCDM-based GIS model for subsea oil pipeline route optimization: An integrated approach. Marine Georesources and Geotechnology, 35 (7). pp. 961-969.

Ban, Z.H. and Lau, K.K. and Shariff, A.M. (2017) In-line physical desorption unit—Part 1: Conceptual design and numerical analysis. Chemical Engineering Research and Design, 117 . pp. 792-809.

Ban, Z.H. and Lau, K.K. and Shariff, A.M. (2017) In-line physical desorption unit—Part 2: Optimisation analysis. Chemical Engineering Research and Design, 117 . pp. 810-830.

Basha, I.H.K. and Hamid, N.H. and Yousuff, C.M. and Ho, E.T.W. (2017) Irreversible electroporation of multiple blood cells in continuous flow microfluidic device-A theoretical study. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Bashir, A.S.M. and Manusamy, Y. and Chew, T.L. and Ismail, H. and Ramasamy, S. (2017) Mechanical, thermal, and morphological properties of (eggshell powder)-filled natural rubber latex foam. Journal of Vinyl and Additive Technology, 23 (1). pp. 3-12.

Bashir, M.J.K. and Wong, J.W. and Sethupathi, S. and Aun, N.C. and Wei, L.J. (2017) Preparation of Palm Oil Mill Effluent Sludge Biochar for the Treatment of Landfill Leachate. MATEC Web of Conferences, 103 .

Bashir, Y. and Ghosh, D.P. and Alashloo, S.Y.M. and Sum, C.W. (2017) Importance of Seismic Diffractions for Fractures Imaging. IOP Conference Series: Earth and Environmental Science, 88 (1).

Bashiri, R. and Mohamed, N.M. and Fai Kait, C. and Sufian, S. and Khatani, M. (2017) Enhanced hydrogen production over incorporated Cu and Ni into titania photocatalyst in glycerol-based photoelectrochemical cell: Effect of total metal loading and calcination temperature. International Journal of Hydrogen Energy, 42 (15). pp. 9553-9566.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. and Khatani, M. (2017) Enhancing photoelectrochemical hydrogen production over Cu and Ni doped titania thin film: Effect of calcination duration. Journal of Environmental Chemical Engineering, 5 (4). pp. 3207-3214.

Basim Ismail, F. and Hamzah Abed, K. and Singh, D. and Shakir Nasif, M. (2017) Pure intelligent monitoring system for steam economizer trips. MATEC Web of Conferences, 131 .

Basim Ismail, F. and Why Siew Kuan, E. and Shakir Nasif, M. (2017) Development and implementation of bottom ash crushing system in Submerged Scrapper Conveyor (SSC) for Coal-fired Power Plant. MATEC Web of Conferences, 131 .

Basrawi, F. and Ibrahim, T.K. and Habib, K. and Yamada, T. and Daing Idris, D.M.N. (2017) Techno-economic performance of biogas-fueled micro gas turbine cogeneration systems in sewage treatment plants: Effect of prime mover generation capacity. Energy, 124 . pp. 238-248.

Basri, W.N.F.W. and Lim, J.-W. and Isa, M.H. and Baloo, L. and Uemura, Y. and Bashir, M.J.K. (2017) Modifications of sugarcane bagasse-derived adsorbents to enhance the adsorption of microalgae biomass in easing harvesting process. AIP Conference Proceedings, 1891 .

Bataee, M. and Hamdi, Z. and Irawan, S. and Ashena, R. and Ghassemi, M.F. (2017) Effect of saturation alteration on wellbore stability during WAG Injection. Society of Petroleum Engineers - SPE Russian Petroleum Technology Conference 2017 .

Bataee, M. and Irawan, S. and Namazi-saleh, F. and Ridha, S. (2017) Development of stress model near the wellbore using an iterative coupling method. International Journal of Geomechanics, 17 (2).

Bataee, M. and Irawan, S. and Ridha, S. and Hematpour, H. and Hamdi, Z. (2017) Wellbore failure during water-alternating-gas injection by use of flow-stress coupling method. SPE Journal, 22 (1). pp. 172-183.

Bavoh, C.B. and Partoon, B. and Lal, B. and Gonfa, G. and Foo Khor, S. and Sharif, A.M. (2017) Inhibition effect of amino acids on carbon dioxide hydrate. Chemical Engineering Science, 171 . pp. 331-339.

Bavoh, C.B. and Partoon, B. and Lal, B. and Kok Keong, L. (2017) Methane hydrate-liquid-vapour-equilibrium phase condition measurements in the presence of natural amino acids. Journal of Natural Gas Science and Engineering, 37 . pp. 425-434.

Beh , Hoe Guan (2017) Influence of La3+ Substitution on Structure, Morphology and Magnetic Properties of Nanocrystalline Ni-Zn Ferrite. PLOS ONE .

Behjani, M.A. and Rahmanian, N. and Fardina bt Abdul Ghani, N. and Hassanpour, A. (2017) An investigation on process of seeded granulation in a continuous drum granulator using DEM. Advanced Powder Technology, 28 (10). pp. 2456-2464.

Bekdash, M. and Asirvadam, V.S. and Kamel, N. and Yanti, D.K. (2017) Estimation of driver alertness to different colors and intensities using brain visual evoked potentials. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Belachew, C.T. and Che Ismail, M. and Karuppanan, S. (2017) Strength Assessment of Corroded Pipelines - Finite Element Simulations and Parametric Studies. International Journal of Structural Stability and Dynamics, 17 (7).

Ben-Awuah, J. and Padmanabhan, E. (2017) An enhanced approach to predict permeability in reservoir sandstones using artificial neural networks (ANN). Arabian Journal of Geosciences, 10 (7).

Ben-Awuah, J. and Padmanabhan, E. and Sokkalingam, R. (2017) Geochemistry of Miocene sedimentary rocks from offshore West Baram Delta, Sarawak Basin, Malaysia, South China Sea: implications for weathering, provenance, tectonic setting, paleoclimate and paleoenvironment of deposition. Geosciences Journal, 21 (2). pp. 167-185.

Bhat, A.H. and Dasan, Y.K. and Khan, I. and Jawaid, M. (2017) Cellulosic biocomposites: Potential materials for future. Green Energy and Technology (978331). pp. 69-100.

Bhatti, M.S. and Rasheed, W. and Tang, T.B. and Laude, A. (2017) Investigating eye-strain due to prolonged exposure to low resolution multimedia using LSFG. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Bhatti, M.S. and Rasheed, W. and Tang, T.B. and Laude, A. (2017) Temporal comparison of ocular blood flow in quadrant divisions of optic nerve head before and after water drinking test. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Bhatti, M.S. and Tang, T.B. and Laude, A. (2017) Effects of water drinking test on ocular blood flow waveform parameters: A laser speckle flowgraphy study. PLoS ONE, 12 (7).

Bhayo, B.A. and Al-Kayiem, H.H. (2017) Experimental characterization and comparison of performance parameters of S-rotors for standalone wind power system. Energy, 138 . pp. 752-763.

Bilad, M.R. and Druyts, J. and Vankelecom, I.F.J. (2017) Role of surface pores on fouling of polyvinylidene fluoride membranes in submerged membrane bioreactors. IOP Conference Series: Materials Science and Engineering, 180 (1).

Bin Abdul Karim, S.A. (2017) Rational Cubic Spline Interpolation for Monotonic Interpolating Curve with C2 Continuity. MATEC Web of Conferences, 131 .

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Chung, T.D. and Hassan, S.M. (2017) Optimal PID control of pH neutralization plant. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. (2017) Fractional-order filter design for set-point weighted PID controlled unstable systems. International Journal of Mechanical and Mechatronics Engineering, 17 (5). pp. 173-179.

Binti Mad Juhani, J. and Bin Ibrahim, R. (2017) Acoustic emission technique for early leakage detection of in-service control valve. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Bokhari, A. and Yusup, S. and Chuah, L.F. and Klemeš, J.J. and Asif, S. and Ali, B. and Akbar, M.M. and Kamil, R.N.M. (2017) Pilot scale intensification of rubber seed (Hevea brasiliensis) oil via chemical interesterification using hydrodynamic cavitation technology. Bioresource Technology, 242 . pp. 272-282.

Broni-Bediako, E. and Amorin, R. and Bavoh, C.B. (2017) Gas hydrate formation phase boundary behaviour of synthetic natural gas system of the Keta basin of Ghana. Open Petroleum Engineering Journal, 10 . pp. 64-72.

Bustam, Azmi (2017) Effect of task specific thiocyanate based ionic liquids on relative volatility of cyclohexane and benzene azeotropic mixture. Effect of task specific thiocyanate based ionic liquids on relative volatility of cyclohexane and benzene azeotropic mixture .

Bustam, Azmi (2017) Physical properties of aqueous solutions of potassium l-prolinate from 298.15 to 343.15 K at atmospheric pressure. Physical properties of aqueous solutions of potassium l-prolinate from 298.15 to 343.15 K at atmospheric pressure .

Bustam, Azmi and Man, Zakaria and Hasan, Nurul (2017) Preparation and kinetics study of biodiesel production from waste cooking oil using new functionalized ionic liquids as catalysts. Preparation and kinetics study of biodiesel production from waste cooking oil using new functionalized ionic liquids as catalysts .

Bustam, Azmi and Uemura, Yoshimitsu (2017) Ionic liquids toxicity on fresh water microalgae, Scenedesmus quadricauda, Chlorella vulgaris & Botryococcus braunii; selection criterion for use in a two-phase partitioning bioreactor (TPPBR). Ionic liquids toxicity on fresh water microalgae, Scenedesmus quadricauda, Chlorella vulgaris & Botryococcus braunii; selection criterion for use in a two-phase partitioning bioreactor (TPPBR) .

Bustam, Azmi and Wilfred, Cecilia (2017) Thermokinetics of alkyl methylpyrrolidinium [NTf2] ionic liquids. Thermokinetics of alkyl methylpyrrolidinium [NTf2] ionic liquids .

binti Mohd Zulkefli, N.A. and bin Baharudin, B. and bin Md Said, A. (2017) Trust blog ranking using multi-criteria decision analysis AHP and TOPSIS. Lecture Notes in Electrical Engineering, 450 . pp. 68-76.

C

Chai, Y.H. and Yusup, S. and Chok, V.S. and Irawan, S. and Singh, J.D.B.S. and Chin, B.L.F. (2017) Comparison of rheological properties of graphene / carbon nanotube hydrogenated oil based biodegradable drilling fluid. IOP Conference Series: Materials Science and Engineering, 206 (1).

Chai, Y.H. and Yusup, S. and Chok, V.S. and Irawan, S. and Singh, J.S.D.B. (2017) Thermophysical properties of graphene nanosheets – Hydrogenated oil based nanofluid for drilling fluid improvements. Applied Thermal Engineering, 122 . pp. 794-805.

Chala, G.T. and Aziz, A.R.A. and Hagos, F.Y. (2017) Combined effect of boost pressure and injection timing on the performance and combustion of CNG in a DI spark ignition engine. International Journal of Automotive Technology, 18 (1). pp. 85-96.

Che Abdullah, S.M. and Nor, N.M. and Zakariya, M.A. and Ali, S.M. and Daud, H. (2017) Investigation of the DGS-CDRA design with the aperture coupling technique for wide band application. Lecture Notes in Electrical Engineering, 398 . pp. 563-570.

Che Othman, F.E. and Yusof, N. and Hasbullah, H. and Jaafar, J. and Ismail, A.F. and Abdullah, N. and Md Nordin, N.A.H. and Aziz, F. and Wan Salleh, W.N. (2017) Polyacrylonitrile/magnesium oxide-based activated carbon nanofibers with well-developed microporous structure and their adsorption performance for methane. Journal of Industrial and Engineering Chemistry, 51 . pp. 281-287.

Chee, L.H. and Kumar, P. and Kang, C.H. and Burhanudin, Z.A. (2017) DNA/AuNP-graphene back-gated field effect transistor as a biosensor for lead (II) ion detection. Proceedings of the 2017 IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2017 . pp. 127-130.

Chee, L.P. and Alwi, S.R.W. and Lim, J.S. and Siwayanan, P. (2017) Production decision support system: Real-life emulsion plant case study. Chemical Engineering Transactions, 56 . pp. 1267-1272.

Chee, P.S. and Elamvazuthi, I. and Izhar, L.I. and Tageldeen, M.K. and Capi, G. (2017) Robotics rehabilitation for assessment of activities of daily living (ADL). 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Cheen, O.C. and Gopinath, S.C.B. and Perumal, V. and Arshad, M.K.M. and Lakshmipriya, T. and Chen, Y. and Haarindraprasad, R. and Rao, B.S. and Hashim, U. and Pandian, K. (2017) Aptamer-based impedimetric determination of the human blood clotting factor IX in serum using an interdigitated electrode modified with a ZnO nanolayer. Microchimica Acta, 184 (1). pp. 117-125.

Chennuri, B.K. and Losetty, V. and Wilfred, C.D. and Gardas, R.L. (2017) Thermophysical properties of N-phenyl-N-ethanol ammonium carboxylate based ionic liquids: Measurements, correlations and COSMO-RS study. Journal of Molecular Liquids, 241 . pp. 246-254.

Chien, L.J. and Drieberg, M. and Sebastian, P. and Hiung, L.H. (2017) A simple solar energy harvester for wireless sensor networks. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Chong, S.L. (2017) Many languages, whither literacy? Understanding the ontology of reading in linguistically-diverse contexts. 3L: Language, Linguistics, Literature, 23 (2). pp. 1-13.

Choong Chee Meng, Askury Abdul Kadir, Muhammad Noor Amin Zakaria, . (2017) Fractures of Gunung Ledang Granite: Insight to Post-Cretaceous Structural Event. Fractures of Gunung Ledang Granite: Insight to Post-Cretaceous Structural Event .

Choong Chee Meng, Nur Huda M Jamin, Muhammad Azfar Mohamed, Chin, . (2017) Sedimentology of Potential Tertiary Fluvial Deposits in Kluang, Johor, Malaysia. Sedimentology of Potential Tertiary Fluvial Deposits in Kluang, Johor, Malaysia .

Chuah, L.F. and Bokhari, A. and Yusup, S. and Klemeš, J.J. and Akbar, M.M. and Saminathan, S. (2017) Optimisation on pretreatment of kapok seed (Ceiba pentandra) oil via esterification reaction in an ultrasonic cavitation reactor. Biomass Conversion and Biorefinery, 7 (1). pp. 91-99.

Chuah, L.F. and Klemeš, J.J. and Yusup, S. and Bokhari, A. and Akbar, M.M. (2017) Influence of fatty acids in waste cooking oil for cleaner biodiesel. Clean Technologies and Environmental Policy, 19 (3). pp. 859-868.

Chuah, L.F. and Klemeš, J.J. and Yusup, S. and Bokhari, A. and Akbar, M.M. (2017) A review of cleaner intensification technologies in biodiesel production. Journal of Cleaner Production, 146 . pp. 181-193.

Chuah, L.F. and Klemeš, J.J. and Yusup, S. and Bokhari, A. and Akbar, M.M. and Chong, Z.K. (2017) Kinetic studies on waste cooking oil into biodiesel via hydrodynamic cavitation. Journal of Cleaner Production, 146 . pp. 47-56.

Chughtai, O. and Badruddin, N. and Awang, A. (2017) A node/link level congestion detection approach in low power and limited broadcast range wireless ad hoc networks. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Chughtai, O. and Badruddin, N. and Awang, A. (2017) A novel congestion alleviation procedure in multi-hop wireless sensor networks. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Chughtai, O. and Badruddin, N. and Awang, A. and Rehan, M. (2017) A novel route discovery procedure for congestion avoidance in multi-hop WSNs. International Journal of Sensor Networks, 25 (4). pp. 229-243.

Chughtai, O. and Badruddin, N. and Rehan, M. and Khan, A. (2017) Congestion detection and alleviation in multihop wireless sensor networks. Wireless Communications and Mobile Computing, 2017 .

Chung, T.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Hassan, S.M. (2017) Effect of network induced delays on WirelessHART control system. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Chung, T.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Hassan, S.M. (2017) Energy Consumption Analysis of WirelessHART Adaptor for Industrial Wireless Sensor Actuator Network. Procedia Computer Science, 105 . pp. 227-234.

Chung, T.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Hassan, S.M. (2017) Latency analysis of WirelessHART control message with variable payload. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Chung, T.D. and Ibrahim, R. and Hassan, S.M. and Rosli, N.S. (2017) Fast approach for automatic data retrieval using R programming language. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Cole, J.M. and Abdelrahim, O.B. and Hunter, A.W. and Schrank, E. and Ismail, M.S.B. (2017) Late Cretaceous spore-pollen zonation of the Central African Rift System (CARS), Kaikang Trough, Muglad Basin, South Sudan: angiosperm spread and links to the Elaterates Province. Palynology, 41 (4). pp. 547-578.

Crespo, E.A. and Costa, J.M.L. and Hanafiah, Z.B.M.A. and Kurnia, K.A. and Oliveira, M.B. and Llovell, F. and Vega, L.F. and Carvalho, P.J. and Coutinho, J.A.P. (2017) New measurements and modeling of high pressure thermodynamic properties of glycols. Fluid Phase Equilibria, 436 . pp. 113-123.

D

Dahalan, A.A. and Muthuvalu, M.S. and Aruchunan, E. and Sulaiman, J. and Din, W.R.W. (2017) Application of implicit scheme with AGE iterative method for solving fuzzy parabolic equation. AIP Conference Proceedings, 1830 .

Dahy, E. and Shafie, A. and Abdel-Aty, A.-H. and Yahya, N. and Nyamasvisva, T.E. (2017) Simulation of the electromagnetic field response of a horizontal ring electric dipole antenna in planarly homogeneous layered media. Journal of Computational and Theoretical Nanoscience, 14 (7). pp. 3149-3155.

Danaei, S. and Hermana, M. and Ghosh, D.P. (2017) 4D seismic reservoir surveillance for a field located in Malaysian basins using different time-lapse seismic attributes. 79th EAGE Conference and Exhibition 2017 .

Daneshfozoun, S. and Abdullah, M.A. and Abdullah, B. (2017) Preparation and characterization of magnetic biosorbent based on oil palm empty fruit bunch fibers, cellulose and Ceiba pentandra for heavy metal ions removal. Industrial Crops and Products, 105 . pp. 93-103.

Dang Huu, T. and Ismail, I.B. (2017) Modelling of Twin Rotor MIMO system. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Danish, M. and Ginta, T.L. and Habib, K. and Carou, D. and Rani, A.M.A. and Saha, B.B. (2017) Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditions. International Journal of Advanced Manufacturing Technology, 91 (5-8). pp. 2855-2868.

Danlami, N. and Napiah, M. and Sadullah, A.F.M. and Bala, N. (2017) Exploring tangent-to-curve speed dynamics on two-lane roads in northern Nigeria. International Journal of Civil Engineering and Technology, 8 (11). pp. 466-473.

Dasan, Y.K. and Bhat, A.H. and Ahmad, F. (2017) Polymer blend of PLA/PHBV based bionanocomposites reinforced with nanocrystalline cellulose for potential application as packaging material. Carbohydrate Polymers, 157 . pp. 1323-1332.

Dasan, Y.K. and Bhat, A.H. and Faiz, A. (2017) Development and material properties of poly(lactic acid)/poly(3-hydroxybutyrate-co−3-hydroxyvalerate)-based nanocrystalline cellulose nanocomposites. Journal of Applied Polymer Science, 134 (5).

Dasan, Y.K. and Guan, B.H. and Zahari, M.H. and Chuan, L.K. (2017) Influence of La3+ substitution on structure, morphology and magnetic properties of nanocrystalline Ni-Zn ferrite. PLoS ONE, 12 (1).

Dass, S.C. and Lee, J. and Lee, K. and Park, J. (2017) Laplace based approximate posterior inference for differential equation models. Statistics and Computing, 27 (3). pp. 679-698.

Daud, Hanita and Zakariya, M.A. and Mohd Nor, Nursyarizal (2017) Investigation of the DGS-CDRA Design with the Aperture Coupling Technique for Wide Band Application. 9TH INTERNATIONAL CONFERENCE ON ROBOTIC, VISION, SIGNAL PROCESSING AND POWER APPLICATIONS: EMPOWERING RESEARCH AND INNOVATION .

Daud, S.A. and Mohd Shaber, N. and Mahmood, N.H. and Ramlee, M.H. (2017) Polygon 3D surface reconstruction using IR scanner. Communications in Computer and Information Science, 751 . pp. 235-244.

Dennis , John Ojur (2017) Pseudocapacitive Charge Storage in Single-Step-Synthesized CoO-MnO2MnCo2O4 Hybrid Nanowires in Aqueous Alkaline Electrolytes. Pseudocapacitive Charge Storage in Single-Step-Synthesized CoO-MnO2MnCo2O4 Hybrid Nanowires in Aqueous Alkaline Electrolytes .

Dharmowijoyo, D.B.E. and Susilo, Y.O. and Karlström, A. (2017) Analysing the complexity of day-to-day individual activity-travel patterns using a multidimensional sequence alignment model: A case study in the Bandung Metropolitan Area, Indonesia. Journal of Transport Geography, 64 . pp. 1-12.

Dhuban, S.B. and Karuppanan, S. and Mengal, A.N. and Patil, S.S. (2017) Effect of fiber orientation and ply stacking sequence on buckling behaviour of basalt-carbon hybrid composite laminates. Indian Journal of Engineering and Materials Sciences, 24 (3). pp. 187-193.

Din, I.U. and Shaharun, M.S. and Naeem, A. and Tasleem, S. and Johan, M.R. (2017) Carbon nanofiber-based copper/zirconia catalyst for hydrogenation of CO2 to methanol. Journal of CO2 Utilization, 21 . pp. 145-155.

Djuraev, U. and Jufar, S.R. and Vasant, P. (2017) A review on conceptual and practical oil and gas reservoir monitoring methods. Journal of Petroleum Science and Engineering, 152 . pp. 586-601.

Dominic, P.D.D. and Maitra, S. (2017) A study on the relationship between supply chain integration, disintegration and organizational efficiency. Proceedings - 6th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2016 . pp. 96-101.

E

E Silva, F.A. and Pereira, J.F.B. and Kurnia, K.A. and Ventura, S.P.M. and Silva, A.M.S. and Rogers, R.D. and Coutinho, J.A.P. and Freire, M.G. (2017) Temperature dependency of aqueous biphasic systems: An alternative approach for exploring the differences between Coulombic-dominated salts and ionic liquids. Chemical Communications, 53 (53). pp. 7298-7301.

Edara, G. and Murthy, Y.V.V.S.N. and Sharma, K.V. and Pullela, S. (2017) Numerical modeling of a fuel droplet for the evaluation of ignition temperature considering transport properties. Case Studies in Thermal Engineering, 10 . pp. 121-130.

Egambaram, A. and Badruddin, N. and Asirvadam, V.S. and Begum, T. (2017) Comparison of envelope interpolation techniques in Empirical Mode Decomposition (EMD) for eyeblink artifact removal from EEG. IECBES 2016 - IEEE-EMBS Conference on Biomedical Engineering and Sciences . pp. 590-595.

Elangovan, D. and Arunkumar, G. and Indragandhi, V. and Venkatesh, S. and Kannan, R. (2017) Design and analysis of flyback micro inverter for integration of fuel cells with single phase grid. International Journal of Mechanical Engineering and Technology, 8 (11). pp. 204-219.

Elangovan, D. and Arunkumar, G. and Indragandhi, V. and Venkatesh, S. and Kannan, R. (2017) Design and analysis of flyback micro inverter for integration of fuel cells with single phase grid. International Journal of Mechanical Engineering and Technology, 8 (11). pp. 220-228.

Elgharbawy, A.A. and Alam, M.Z. and Kabbashi, N.A. and Moniruzzaman, M. and Jamal, P. (2017) Implementation of Definite Screening Design in Optimization of In Situ Hydrolysis of EFB in Cholinium Acetate and Locally Produced Cellulase Combined System. Waste and Biomass Valorization, 8 (3). pp. 839-850.

Eliseus, A. and Bilad, M.R. (2017) Improving membrane fouling control by maximizing the impact of air bubbles shear in a submerged plate-and-frame membrane module. AIP Conference Proceedings, 1891 .

Elraies, Khaled A (2017) Impact of new foam surfactant blend with water alternating gas injection on residual oil recovery. Impact of new foam surfactant blend with water alternating gas injection on residual oil recovery .

Elraies, Khaled A (2017) Study of blended surfactants to generate stable foam in presence of crude oil for gas mobility control. Study of blended surfactants to generate stable foam in presence of crude oil for gas mobility control .

Eltahir Mustafa, S.G.E. and Mannan, H.A. and Nasir, R. and Mohshim, D.F. and Mukhtar, H. (2017) Synthesis, characterization, and performance evaluation of PES/EDA-functionalized TiO2 mixed matrix membranes for CO2/CH4 separation. Journal of Applied Polymer Science, 134 (39).

Emamian, S. and Awang, M. and Yusof, F. and Hussain, P. and Mehrpouya, M. and Kakooei, S. and Moayedfar, M. and Zafar, A. (2017) A review of friction stir welding pin profile. Lecture Notes in Mechanical Engineering . pp. 1-18.

Emamian, S. and Hussain, P. and Awang, M. and Arumugam, T. and Yusof, F. and Saheed, M.S.M. and Mohamed, N.M. (2017) Comparison of carbon-based nanomaterials characteristics on H13 tool steel: Vergleich der Eigenschaften Kohlenstoff-basierter Nanomaterialien auf H13 Werkzeugstahl. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 198-204.

Emani, S. and Ramasamy, M. and Ku Shaari, K.Z. (2017) CFD modeling of asphaltenes deposition from crude oil through discrete phase simulations. Journal of Engineering and Applied Sciences, 12 (9). pp. 2383-2387.

Emani, S. and Ramasamy, M. and Shaari, K.Z.K. (2017) CFD modelling of shell-side asphaltenes deposition in a shell and tube heat exchanger. AIP Conference Proceedings, 1859 .

Emani, S. and Ramasamy, M. and Shaari, K.Z.K. (2017) Transportation and adhesion of asphaltenes in a heat exchanger tube through CFD simulations. AIP Conference Proceedings, 1859 .

Embong, A.M. and Yaacob, R.A.I.B.R. and Noor, A.M. and Sabian, N.A.A. and Ray, T.C. and Hong, N.T. (2017) Highland teenagers: Their understanding and practice towards water ecology. Journal of Engineering and Applied Sciences, 12 (12). pp. 3267-3271.

Essam, M. and Tang, T.B. and Ho, E.T.W. and Chen, H. (2017) Dynamic point stochastic rounding algorithm for limited precision arithmetic in Deep Belief Network training. International IEEE/EMBS Conference on Neural Engineering, NER . pp. 629-632.

Ezechi, E.H. and Nwabuko, C.G. and Enyinnaya, O.C. and Babington, C.J. (2017) Municipal solid waste management in Aba, Nigeria: Challenges and prospects. Environmental Engineering Research, 22 (3). pp. 231-236.

Ezechi, E.H. and Sapari, N. and Menyechi, E.J. and Ude, C.M. and Olisa, E. (2017) Treatment of produced water in a floating carrier bioreactor. Environmental Engineering Research, 22 (2). pp. 210-215.

F

F.K., Chong and T., Murugesan (2017) Effect of alkyl chain length on the thermophysical properties of pyridinium carboxylates. Effect of alkyl chain length on the thermophysical properties of pyridinium carboxylates .

Faez, K.M. and Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. and Mohamed, N.M. (2017) Performance analysis of long grooved journal bearing with slip, no-slip, and slip/no-slip textured surface configurations. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5794-5798.

Faiz Abdul Wahab, M.A. and Sokiman, M.S. and Jakobsen, K.P. (2017) Numerical modelling for quantitative environmental risk assessment for the disposal of drill cuttings and mud. IOP Conference Series: Earth and Environmental Science, 88 (1).

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Baharom, M.A. (2017) Burst pressure investigation of filament wound type IV composite pressure vessel. AIP Conference Proceedings, 1901 .

Fathiyah Jamaludin, S.N. and Mubin, M. and Abdul Latiff, A.H. (2017) Imaging of karst on buried Miocene Carbonate Platform. IOP Conference Series: Earth and Environmental Science, 88 (1).

Fauzi, A. and Nuruddin, M.F. and Malkawi, A.B. and Abdullah, M.M.A.B. and Mohammed, B.S. (2017) Effect of alkaline solution to fly ash ratio on geopolymer mortar properties. Key Engineering Materials, 733 KE . pp. 85-88.

Fazli, H. and Yassin, A.Y.M. and Shafiq, N. and Wee, T. (2017) The behavior of Carbon Fiber Reinforced Polymer (CFRP) strengthened beams under a marine environment. International Journal of GEOMATE, 13 (39). pp. 179-184.

Fernandes, C.S. and Bilad, M.R. and Nordin, N.A.H.M. (2017) Silica incorporated membrane for wastewater based filtration. AIP Conference Proceedings, 1891 .

Fong, K.S. and Mohd Yassin, A.Y. (2017) Fluid-Structure Interaction (FSI) of Damped Oil Conveying Pipeline System by Finite Element Method. MATEC Web of Conferences, 111 .

Foong, O.-M. and Low, T.J. and Hong, K.W. (2017) Simulation study of single quantum channel BB84 quantum key distribution. Lecture Notes in Electrical Engineering, 450 . pp. 159-167.

Fosu-Duah, E. and Padmanabhan, E. and Gámez Vintaned, J.A. (2017) Micro-scale hydrocarbon distribution in organic-rich shales: A case study in the Union Springs Formation, Marcellus Subgroup (USA). Petroleum and Coal, 59 (5). pp. 641-652.

G

Galaleldin, S. and Mannan, H.A. and Mukhtar, H. (2017) Development and characterization of polyethersulfone/TiO2 mixed matrix membranes for CO2/CH4 separation. AIP Conference Proceedings, 1901 .

Gan, P.G. and Sam, S.T. and Bin Abdullah, M.F. and Bin Zulkepli, N.N. and Yeong, Y.F. (2017) Characterization of nanocrystalline cellulose isolated from empty fruit bunch using acid hydrolysis. Solid State Phenomena, 264 SS . pp. 9-12.

Gandhamal, A. and Talbar, S. and Gajre, S. and Hani, A.F.M. and Kumar, D. (2017) Local gray level S-curve transformation – A generalized contrast enhancement technique for medical images. Computers in Biology and Medicine, 83 . pp. 120-133.

Gandhamal, A. and Talbar, S. and Gajre, S. and Hani, A.F.M. and Kumar, D. (2017) A generalized contrast enhancement approach for knee MR images. 2016 International Conference on Signal and Information Processing, IConSIP 2016 .

Gandhamal, A. and Talbar, S. and Gajre, S. and Razak, R. and Hani, A.F.M. and Kumar, D. (2017) Fully automated subchondral bone segmentation from knee MR images: Data from the Osteoarthritis Initiative. Computers in Biology and Medicine, 88 . pp. 110-125.

Ganesan, T. and Elamvazuthi, I. (2017) A multi-objective approach for resilience-based plant design optimization. Quality Engineering, 29 (4). pp. 656-671.

Gardezi, S.J.S. and Faye, I. and Adjed, F. and Kamel, N. and Eltoukhy, M.M. (2017) Mammogram classification using curvelet GLCM texture features and GIST features. Advances in Intelligent Systems and Computing, 533 . pp. 705-713.

Garg, S. and Murshid, G. and Mjalli, F.S. and Ahmad, W. (2017) Physical properties of aqueous blend of diethanolamine and sarcosine: Experimental and correlation study. Chemical Papers, 71 (10). pp. 1799-1807.

Garg, S. and Murshid, G. and Mjalli, F.S. and Ali, A. and Ahmad, W. (2017) Experimental and correlation study of selected physical properties of aqueous blends of potassium sarcosinate and 2-piperidineethanol as a solvent for CO2 capture. Chemical Engineering Research and Design, 118 . pp. 121-130.

Garg, S. and Shariff, A.M. and Shaik, M.S. and Lal, B. and Aftab, A. and Faiqa, N. (2017) Measurement and prediction of the physical properties of an aqueous sodium salt of L-phenylalanine. Journal of the Serbian Chemical Society, 82 (7-8). pp. 905-919.

Garg, S. and Shariff, A.M. and Shaikh, M.S. and Lal, B. and Suleman, H. and Faiqa, N. (2017) Experimental data, thermodynamic and neural network modeling of CO2 solubility in aqueous sodium salt of l-phenylalanine. Journal of CO2 Utilization, 19 . pp. 146-156.

Gebremariam, M.A. and Yuan, S.X. and Azhari, A. and Lemma, T.A. (2017) Remaining tool life prediction based on force sensors signal during end milling of Stavax ESR steel. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2 .

George, J.M. and Wahab, M.M.A. and John, K.V. (2017) Estimation of aging effects of piles in malaysian offshore locations. Journal of Engineering Science and Technology, 12 (4). pp. 987-1000.

Ghaedi, H. and Ayoub, M. and Sufian, S. and Lal, B. and Shariff, A.M. (2017) Measurement and correlation of physicochemical properties of phosphonium-based deep eutectic solvents at several temperatures (293.15 K–343.15 K) for CO2 capture. Journal of Chemical Thermodynamics, 113 . pp. 41-51.

Ghaedi, H. and Ayoub, M. and Sufian, S. and Lal, B. and Uemura, Y. (2017) Thermal stability and FT-IR analysis of Phosphonium-based deep eutectic solvents with different hydrogen bond donors. Journal of Molecular Liquids, 242 . pp. 395-403.

Ghaedi, H. and Ayoub, M. and Sufian, S. and Shariff, A.M. and Hailegiorgis, S.M. and Khan, S.N. (2017) CO2 capture with the help of Phosphonium-based deep eutectic solvents. Journal of Molecular Liquids, 243 . pp. 564-571.

Ghaedi, H. and Ayoub, M. and Sufian, S. and Shariff, A.M. and Lal, B. (2017) The study on temperature dependence of viscosity and surface tension of several Phosphonium-based deep eutectic solvents. Journal of Molecular Liquids, 241 . pp. 500-510.

Ghalehkhani, P. and Parasuraman, S. and Khan, M.K.A.A. and Elamvazuthi, I. and Debnath, N. and Ali, S.S.A. (2017) Forearm pressure distribution during ambulation with elbow crutches. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Ghanem, O.B. and Mutalib, M.I.A. and Lévêque, J.-M. and El-Harbawi, M. (2017) Development of QSAR model to predict the ecotoxicity of Vibrio fischeri using COSMO-RS descriptors. Chemosphere, 170 . pp. 242-250.

Ghasemi, M. and Ahmad, A. and Jafary, T. and Azad, A.K. and Kakooei, S. and Wan Daud, W.R. and Sedighi, M. (2017) Assessment of immobilized cell reactor and microbial fuel cell for simultaneous cheese whey treatment and lactic acid/electricity production. International Journal of Hydrogen Energy, 42 (14). pp. 9107-9115.

Ghazali, Zulkipli (2017) Brief Communication on Psychosocial Work Environment and Wellbeing in relation to Job Demands-Resources: A Study on Malaysian Public Health Perspective. Brief Communication on Psychosocial Work Environment and Wellbeing in relation to Job Demands-Resources: A Study on Malaysian Public Health Perspective .

Gholami, Z. and Asmawati Mohd ZabiDi, N. and Gholami, F. and Ayodele, O.B. and Vakili, M. (2017) The influence of catalyst factors for sustainable production of hydrocarbons via Fischer-Tropsch synthesis. Reviews in Chemical Engineering, 33 (4). pp. 337-358.

Ghosh, Deva Prasad (2017) A new seismic attribute for ambiguity reduction in hydrocarbon prediction. GEOPHYSICAL PROSPECTING .

Gilal, A.R. and Jaafar, J. and Abro, A. and Omar, M. and Basri, S. and Saleem, M.Q. (2017) Effective personality preferences of software programmer: A systematic review. Journal of Information Science and Engineering, 33 (6). pp. 1399-1416.

Gilal, A.R. and Jaafar, J. and Abro, A. and Umrani, W.A. and Basri, S. and Omar, M. (2017) Making programmer effective for software development teams: An extended study. Journal of Information Science and Engineering, 33 (6). pp. 1447-1463.

Gilani, S.E. and Al-Kayiem, H.H. and Woldemicheal, D.E. and Gilani, S.I. (2017) Performance enhancement of free convective solar air heater by pin protrusions on the absorber. Solar Energy, 151 . pp. 173-185.

Gilani, S.F.-U.-H. and Khir, M.H.B.M. and Ibrahim, R. and Kirmani, E.U.H. and Gilani, S.I.-U.-H. (2017) Modelling and development of a vibration-based electromagnetic energy harvester for industrial centrifugal pump application. Microelectronics Journal, 66 . pp. 103-111.

Goh, C.M. and Saad, N.M. and Malik, A.S. (2017) A simplified method for forearm subcutaneous veins depth estimation. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Goh, C.M. and Subramaniam, R. and Saad, N.M. and Ali, S.A. and Meriaudeau, F. (2017) Subcutaneous veins depth measurement using diffuse reflectance images. Optics Express, 25 (21). pp. 25741-25759.

Gonfa, G. and Bustam, M.A. and Muhammad, N. and Ullah, S. (2017) Effect of task specific thiocyanate based ionic liquids on relative volatility of cyclohexane and benzene azeotropic mixture. Journal of Molecular Liquids, 238 . pp. 208-214.

Gonfa, G. and Ismail, M. and Bustam, M.A. (2017) Benzene and cyclohexane separation using 1-butyl-3-methylimidazolium thiocyanate. AIP Conference Proceedings, 1877 .

Goodwin, V. and Amnaphiang, P. and Thungngern, P. and Kah Shin, K. and Udomsap, P. and Chollacoop, N. (2017) Zeolite supported bimetallic catalyst system: The effect of metal loading for catalytic pyrolysis of jatropha residue. Key Engineering Materials, 751 KE . pp. 494-499.

Gopinath, S.C.B. and Perumal, V. and Balakrishnan, S.R. and Md Arshad, M.K. and Lakshmipriya, T. and Haarindraprasad, R. and Hashim, U. (2017) Aptamer-based determination of ATP by using a functionalized impedimetric nanosensor and mediation by a triangular junction transducer. Microchimica Acta, 184 (11). pp. 4425-4431.

Gopinath, S.C.B. and Perumal, V. and Rao, B.S. and Md Arshad, M.K. and Voon, C.H. and Lakshmipriya, T. and Haarindraprasad, R. and Vijayakumar, T. and Chen, Y. and Hashim, U. (2017) Voltammetric immunoassay for the human blood clotting factor IX by using nanogapped dielectrode junctions modified with gold nanoparticle-conjugated antibody. Microchimica Acta, 184 (10). pp. 3739-3745.

Gothandam, K.M. and Thakur, I.S. and Sukumaran, R.K. and Aguilar, C.N. and Yusup, S. (2017) International Conference on Current Trends in Biotechnology & post ICCB-2016 conference on Strategies for Environmental Protection and Management (ICSEPM-2016). Bioresource Technology, 242 . p. 1.

H

Hafeez, Y. and Ali, S.S.A. (2017) Discrete-time H∞ control of a class of underactuated electromechanical systems. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Hafeez, Y. and Ali, S.S.A. and Malik, A.S. (2017) Neurofeedback training content for treatment of stress. IECBES 2016 - IEEE-EMBS Conference on Biomedical Engineering and Sciences . pp. 133-137.

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. and Firmansyah, and Mamat, R. (2017) Effect of fuel injection timing of hydrogen rich syngas augmented with methane in direct-injection spark-ignition engine. International Journal of Hydrogen Energy, 42 (37). pp. 23846-23855.

Hailegiorgis, S.M. and Khan, S.N. and Abdolah, N.H.H. and Ayoub, M. and Tesfamichael, A. (2017) Carbon dioxide capture via aqueous N-methyldiethanolamine (MDEA)-1-butyl-3-methylimidazolium acetate (bmimAc) hybrid solvent. AIP Conference Proceedings, 1891 .

Hailu Shimels, G. and Dereje Engida, W. and Fakhruldin Mohd, H. (2017) A comparative study on stress and compliance based structural topology optimization. IOP Conference Series: Materials Science and Engineering, 241 (1).

Hairi, H.H. and Md Rafek, A.G. and Abdul Latiff, A.H. (2017) Seismic input optimisation for Joint Migration Inversion on complex structures, Malay Basin. IOP Conference Series: Earth and Environmental Science, 88 (1).

Hairul, N.A.H. and Shariff, A.M. and Bustam, M.A. (2017) Process behaviour in a packed absorption column for high pressure CO2 absorption from natural gas using PZ + AMP blended solution. Fuel Processing Technology, 157 . pp. 20-28.

Haizad, M. and Ibrahim, R. and Adnan, A. and Chung, T.D. and Hassan, S.M. (2017) Development of low-cost real-time data acquisition system for process automation and control. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Hajian, A. and Yong, S.-P. (2017) Feature extraction from EEG data for a P300 based brain-computer interface. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10526 . pp. 39-50.

Halim, A.H. and Ismail, I. (2017) Online PID controller tuning using tree physiology optimization. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Halim, A.H. and Ismail, I. (2017) Single and Multiple variables control using Tree Physiology Optimization. MATEC Web of Conferences, 131 .

Halim, A.H. and Ismail, I. (2017) Tree Physiology Optimization tuning rule for Proportional-Integral control. MATEC Web of Conferences, 131 .

Hamadelnil, A. and Razak, Z.A. and Matsoom, E. and Kurian, V.J. (2017) Improvement of fixed offshore platforms' boat landing performance using practicable design criteria. Proceedings of the International Offshore and Polar Engineering Conference . pp. 633-638.

Hamdavi, S. and Rao, T.V.V.L.N. and Muhammad, M. and Faez, K.M. and Ya, H.H. (2017) Linear stability analysis of short journal bearing with an axial groove: Lineare Stabilitätsanalyse von Kurzgleitlagern mit einer axialen Nut. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 210-217.

Hamid, Nor Hisham (2017) Numerical performance of Half-Sweep Geometric Mean (HSGM) iterative method for solving third order Newton-Cotes quadrature system. MICROMACHINES .

Hammad Tariq Janjuhah, Ahmed Mohammad Ahmed Salim, Deva Parsed G, . (2017) Diagenetic Process and Their Effect on Reservoir Quality in Miocene Carbonate Reservoir, Offshore, Sarawak, Malaysia. Diagenetic Process and Their Effect on Reservoir Quality in Miocene Carbonate Reservoir, Offshore, Sarawak, Malaysia .

Hamza, M.F. and Sinnathambi, C.M. and Merican, Z.M.A. (2017) Recent advancement of hybrid materials used in chemical enhanced oil recovery (CEOR): A review. IOP Conference Series: Materials Science and Engineering, 206 (1).

Hamza, M.F. and Sinnathambi, C.M. and Merican, Z.M.A. and Soleimani, H. and Stephen Karl, D. (2017) An overview of the present stability and performance of eor-foam. Sains Malaysiana, 46 (9). pp. 1641-1650.

Hanapiah, N.M. and Wan Yusoff, W.I. and Zakariah, M.N.A. (2017) Analysis on the overpressure characterization with respect to depositional environment facies: Case Study in Miri Area, Baram Delta. IOP Conference Series: Earth and Environmental Science, 88 (1).

Hani, A.F.M. and Feng, Y.-X. and Tang, T.B. (2017) Working memory task performance on prefrontal cortex activation: An optical neuroimaging study. IECBES 2016 - IEEE-EMBS Conference on Biomedical Engineering and Sciences . pp. 240-245.

Hanouneh, S. and Amin, H.U. and Saad, N.M. and Malik, A.S. (2017) The correlation between EEG asymmetry and memory performance during semantic memory recall. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Harilal, M. and Krishnan, S.G. and Yar, A. and Misnon, I.I. and Reddy, M.V. and Yusoff, M.M. and Dennis, J.O. and Jose, R. (2017) Pseudocapacitive charge storage in single-step-synthesized CoO-MnO2-MnCo2O4 hybrid nanowires in aqueous alkaline electrolytes. Journal of Physical Chemistry C, 121 (39). pp. 21171-21183.

Haron, N. (2017) ReduxGO: Context-Aware Mobile Recommender Application for Reducing Stop-and-Go Scenario. Proceedings - International Conference on Intelligent Systems, Modelling and Simulation, ISMS . pp. 349-355.

Harsoori, M.M. and Zulkifli, T.Z.A. (2017) 60 GHz microstrip filter in 0.13μm RF CMOS technology. Proceedings - 14th IEEE Student Conference on Research and Development: Advancing Technology for Humanity, SCOReD 2016 .

Hasan, E. and Bin Ibrahim, R. and Ali, S.S.A. and Miya, H.S. and Gilani, S.F. (2017) U-Model based online identification of Air Flow Plant. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Hasan, E. and Ibrahim, R.B. and Ali, S.S.A. and Bingi, K. and Gilani, S.F. (2017) U-Model Based Adaptive Control of Gas Process Plant. Procedia Computer Science, 105 . pp. 119-124.

Hasan, M.L. and Embong, A.M. and Mohamed, M.A. (2017) Field trip as a tool to motivate students to learn Geoscience subject. Advanced Science Letters, 23 (8). pp. 7562-7565.

Hasan, R. and Napiah, M. (2017) Pedestrians’ behavior towards the use of footbridges under the impact of motivational alerting posters: The case of Ipoh city, Malaysia. Advances in Transportation Studies, 42 . pp. 117-128.

Hashim, A.S. and Ahmad, W.F.W. (2017) Usability factors that influence effectiveness of mobile learning management system (MLMS) for secondary schools in Malaysia. 2016 IEEE Conference on e-Learning, e-Management and e-Services, IC3e 2016 . pp. 6-11.

Hashim, A.S. and Ahmad, W.F.W. and Sarlan, A. (2017) A study on acceptance of mobileschool at secondary schools in Malaysia: Urban vs rural. AIP Conference Proceedings, 1891 .

Hasnain, S.A. and Nasif, M.S. and Pao, W. and Al-Waked, R. (2017) Numerical investigation of smoke contamination in atrium upper balconies at different down stand depths. Building Simulation, 10 (3). pp. 365-381.

Hassaan, M. and Bhattacharya, S.K. and Mathew, M.J. and Siddiqui, N.A. (2017) Cenozoic development of southwestern Malay Basin: new insights from subsidence analysis and thermal history. Arabian Journal of Geosciences, 10 (8).

Hassaballa, A.A. and Matori, A.-N. and Al-Gaadi, K.A. and Tola, E.H. and Madugundu, R. (2017) Sub-pixel analysis to enhance the accuracy of evapotranspiration determined using MODIS images. International Journal of Agricultural and Biological Engineering, 10 (2). pp. 103-113.

Hassan, M.A. and Komiyama, M. (2017) Catalytic Partial Oxidation of Methane in Supercritical Water: A Domain in CH4/H2O-O2/CH4 Parameter Space Showing Significant Methane Coupling. Industrial and Engineering Chemistry Research, 56 (23). pp. 6618-6624.

Hassan, M.A. and Malik, A.S. and Fofi, D. and Saad, N. and Meriaudeau, F. (2017) Novel health monitoring method using an RGB camera. Biomedical Optics Express, 8 (11). pp. 4838-4854.

Hassan, M.A. and Malik, A.S. and Fofi, D. and Saad, N.M. and Ali, Y.S. and Meriaudeau, F. (2017) Video-based heartbeat rate measuring method using ballistocardiography. IEEE Sensors Journal, 17 (14). pp. 4544-4557.

Hassan, M.A. and Malik, A.S. and Saad, N. and Fofi, D. and Meriaudeau, F. (2017) Effect of motion artifact on digital camera based heart rate measurement. Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS . pp. 2851-2854.

Hassan, M.A. and Malik, A.S. and Saad, N. and Karasfi, B. and Fofi, D. and Sohail, W. (2017) Towards health monitoring in visual surveillance. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Hassan, M.A. and Pardiansyah, I. and Malik, A.S. and Faye, I. and Rasheed, W. (2017) Enhanced people counting system based head-shoulder detection in dense crowd scenario. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Hassan, M.H. and Othman, A.R. (2017) Contribution of processing parameters on void content in the vacuum bagging configurations of L-shaped composite laminates. International Journal of Advanced Manufacturing Technology, 93 (1-4). pp. 1333-1345.

Hassan, M.H. and Othman, A.R. and Kamaruddin, S. (2017) The use of response surface methodology (RSM) to optimize the acid digestion parameters in fiber volume fraction test of aircraft composite structures. International Journal of Advanced Manufacturing Technology, 90 (9-12). pp. 3739-3748.

Hassan, Mohd Fadzil and N.M., Yunus and Sakidin, Hamzah (2017) Location Fingerprinting Technique for WLAN Device-Free Indoor Localization System. Location Fingerprinting Technique for WLAN Device-Free Indoor Localization System .

Hassan, R. and Marimuth, M. and Tariq, E. and Aqeel, R. (2017) Ethnic and gender diversity in top level management and firm performance: Shareholder's perspectives. Journal of International Women's Studies, 18 (4). pp. 1-12.

Hassan, S. and Khanesar, M.A. and Jaafar, J. and Khosravi, A. (2017) Comparative analysis of three approaches of antecedent part generation for an IT2 TSK FLS. Applied Soft Computing Journal, 51 . pp. 130-144.

Hassan, S. and Khanesar, M.A. and Jaafar, J. and Khosravi, A. (2017) A multi-objective genetic type-2 fuzzy extreme learning system for the identification of nonlinear dynamic systems. 2016 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2016 - Conference Proceedings . pp. 155-160.

Hassan, S.M. and Ibrahim, R. and Bingi, K. and Chung, T.D. and Saad, N. (2017) Application of Wireless Technology for Control: A WirelessHART Perspective. Procedia Computer Science, 105 . pp. 240-247.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Chung, T.D. (2017) Implementation of real-time WirelessHART network for control application. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Chung, T.D. (2017) Predictive PI controller for wireless control system with variable network delay and disturbance. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Chung, T.D. (2017) A filtered predictive PI controller for wirelessHART networked control system. Control Engineering and Applied Informatics, 19 (4). pp. 13-24.

Hassan, Suhaimi and Sulaiman, Shaharin Anwar (2017) Combustion and Performance of Syngas Dual Fueling in a CI Engine with Blended Biodiesel as Pilot Fuel. BIORESOURCES .

Haylay Tsegab, Chow Weng Sum, Jasmi Ab Talib, . (2017) Lithostratigraphy of Paleozoic Carbonates in the Kinta Valley, Peninsular Malaysia: Analogue for Paleozoic Successions. Lithostratigraphy of Paleozoic Carbonates in the Kinta Valley, Peninsular Malaysia: Analogue for Paleozoic Successions .

Hazwani Dzulkafli, H. and Ahmad, F. and Ullah, S. and Hussain, P. and Mamat, O. and Megat-Yusoff, P.S.M. (2017) Effects of talc on fire retarding, thermal degradation and water resistance of intumescent coating. Applied Clay Science, 146 . pp. 350-361.

Hematpour, H. and Mahmood, S.M. and Akbari, S. and Nasr, N.H. (2017) Comparison study on sag foam model parameters in different reservoir simulators. Journal of Engineering and Applied Sciences, 12 (21). pp. 5373-5378.

Herman, M. and Syahmi Hashim, H. and Abdul Latif, A.H. and Ghosh, D.P. (2017) Application of FK Filtering for Coherent Noise Removal in High Frequency Shallow Marine Data. IOP Conference Series: Earth and Environmental Science, 88 (1).

Hidayah, N.M.S. and Liu, W.-W. and Lai, C.-W. and Noriman, N.Z. and Khe, C.-S. and Hashim, U. and Lee, H.C. (2017) Comparison on graphite, graphene oxide and reduced graphene oxide: Synthesis and characterization. AIP Conference Proceedings, 1892 .

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. and Rao, T.V.V.L.N. (2017) Meshless Local B-Spline Collocation Method for Two-Dimensional Heat Conduction Problems With Nonhomogenous and Time-Dependent Heat Sources. Journal of Heat Transfer, 139 (7).

Hidayat, M.I.P. and Irawan, S. and Abdullah, M.Z. (2017) Effect of casing imperfection on the casing strength in steam injection wells. IOP Conference Series: Materials Science and Engineering, 267 (1).

Hina, S. and Dominic, D.D. (2017) Digital connectivity and sharing at school: Opportunities and security challenges of using social networking sites. 2017 5th International Conference on Information and Communication Technology, ICoIC7 2017 .

Hina, S. and Dominic, D.D. (2017) Need for information security policies compliance: A perspective in Higher Education Institutions. International Conference on Research and Innovation in Information Systems, ICRIIS .

Hirol, H. and Noor, M.A.M. and Kasiman, E.H. and Hong, A.K.B. and Yusop, Z. and Yassin, A.Y.M. (2017) Meshless point interpolation formulation of kinematic wave equation for flood routing. Journal of Engineering and Applied Sciences, 12 (20). pp. 5286-5293.

Hisham, A.A.B. and Nafea, M. and Aujih, A.B. and Ishak, M.H.I. and Abidin, M.S.Z. (2017) Racer: a simulated environment driving simulator to investigate human driving skill. Communications in Computer and Information Science, 752 . pp. 534-547.

Hittawe, M.M. and Sidibé, D. and Beya, O. and Mériaudeau, F. (2017) Machine vision for timber grading singularities detection and applications. Journal of Electronic Imaging, 26 (6).

Hizam, S. and Bilad, M.R. and Putra, Z.A. (2017) Integration of membrane distillation into traditional salt farming method: Process development and modelling. AIP Conference Proceedings, 1891 .

Hooi, L.Y. and Hiung, L.H. and Drieberg, M. and Sebastian, P. (2017) Configurable 2 bits per cycle successive approximation register for analog to digital converter on FPGA. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Hori, Y. and Yamamoto, H. and Suzuki, T. and Okitsu, J. and Nakamura, T. and Maeda, T. and Matsuo, T. and Bt Zabiri, H. and Tufa, L.D. and Marappagounder, R. (2017) Online anomaly detection of distillation tower system using adaptive resonance theory. Journal of Chemical Engineering of Japan, 50 (6Speci). pp. 430-438.

Huang, K.L. and Baioumy, H. and Lim, J.M. and Lim, L.Y.S. and Yong, S. and Rajoo, T. and Hareedranathan, D.M. (2017) Sedimentology of black shale in turbidite at Semanggol Formation. 79th EAGE Conference and Exhibition 2017 .

Husain, K. and Awang, A. (2017) A receiver-based forwarding scheme to minimize multipath formation in VANET. Advances in Intelligent Systems and Computing, 548 . pp. 15-26.

Husain, K. and Awang, A.B. and Kamel, N. (2017) Receiver-based data forwarding in vehicular ad hoc networks. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Hussain, M. and Akhter, P. and Iqbal, J. and Ali, Z. and Yang, W. and Shehzad, N. and Majeed, K. and Sheikh, R. and Amjad, U.-E.-S. and Russo, N. (2017) VOCs photocatalytic abatement using nanostructured titania-silica catalysts. Journal of Environmental Chemical Engineering, 5 (4). pp. 3100-3107.

Hussain, M. and Tufa, L.D. and Yusup, S. and Zabiri, H. and Taqvi, S.A. (2017) Aspen plus® simulation studies of steam gasification in fluidized bed reactor for hydrogen production using palm kernel shell. Communications in Computer and Information Science, 751 . pp. 628-641.

Hussain, N. and Karsiti, M.N. and Jeoti, V. and Yahya, N. and Yahya, N. (2017) 2D controlled source electromagnetic modeling in layered medium using hybrid method. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Hussain, N. and Karsiti, M.N. and Yahya, N. and Jeoti, V. and Yahya, N. (2017) 2D wavelets Galerkin method for the computation of em field on seafloor excited by a point source. International Journal of Applied Electromagnetics and Mechanics, 53 (4). pp. 631-644.

Hussain, N.A.A. and Ali, S.S.A. and Saad, M.N.M. and Nordin, N. (2017) Underactuated nonlinear adaptive control approach using U-model for multivariable underwater glider control parameters. USYS 2016 - 2016 IEEE 6th International Conference on Underwater System Technology: Theory and Applications . pp. 19-25.

Hussain, Z. and Sulaiman, S.A. and Bashir, N. and Uddin, I. and Khan, K.M. and Perveen, S. and Naz, M.Y. (2017) Effect of pretreatment on product distribution of two-step catalytic pyrolysis of spirogyra. Environmental Progress and Sustainable Energy, 36 (3). pp. 775-780.

Hussein, S.A. and Tahir, A.S.M. and Awang, M. (2017) On amorphous phase formation in dissimilar friction stir welding of aluminum to steel. Lecture Notes in Mechanical Engineering . pp. 69-81.

Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2017) Bio-inspired fault tolerant network on chip. Bio-inspired fault tolerant network on chip .

Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2017) Review of Network on Chip Architectures. RECENT ADVANCES IN ELECTRICAL & ELECTRONIC ENGINEERING .

I

I., Faye and Kamel , Nidal (2017) Mammogram Classification Using Curvelet GLCM Texture Features and GIST Features. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT SYSTEMS AND INFORMATICS 2016 .

Ibrahim, K.A. and Naz, M.Y. and Sulaiman, S.A. and Ghaffar, A. and Jamil, Y. and Abdel-Salam, N.M. (2017) Effect of urea and borate plasticizers on rheological response of corn starch. Polymers, 9 (9).

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2017) Comparative studies of PID controller tuning methods on a DC-DC boost converter. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Ibrahim, O. and Yahaya, N.Z. and Saad, N. and Ahmed, K.Y. (2017) Design and simulation of phase-shifted full bridge converter for hybrid energy systems. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Ibrahim, O. and Yahaya, N.Z. and Saad, N. and Ahmed, K.Y. (2017) Development of Observer State Output Feedback for Phase-Shifted Full Bridge DC-DC Converter Control. IEEE Access, 5 . pp. 18143-18154.

Ibrahim, R. and Chung, T.D. and Hassan, S.M. and Bingi, K. and Salahuddin, S.K.B. (2017) Solar Energy Harvester for Industrial Wireless Sensor Nodes. Procedia Computer Science, 105 . pp. 111-118.

Ibrahim, R. and Gilani, S.F.U.H. and Jamil, A. and Yusoff, M.Z. (2017) Design and analysis of an RF rectifying circuit upon integration with monopole and Fractal antennas. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Ibrahim, Z.B. and Mohd Nasir, N.A.A. and Othman, K.I. and Zainuddin, N. (2017) Adaptive order of block backward differentiation formulas for stiff ODEs. Numerical Algebra, Control and Optimization, 7 (1). pp. 95-106.

Idris, A. and Harahap, I.S.H. and Ali, M.O.A. (2017) An approach for time-dependent reliability analysis of Jackup structures. Cogent Engineering, 4 (1).

Idris, A. and Man, Z. and Maulud, A.S. (2017) Polycarbonate/silica nanocomposite membranes: Fabrication, characterization, and performance evaluation. Journal of Applied Polymer Science, 134 (38).

Idris, A. and Man, Z. and Maulud, A.S. and Khan, M.S. (2017) Effects of phase separation behavior on morphology and performance of polycarbonate membranes. Membranes, 7 (2).

Idrus, H. (2017) Can oral communication strategies help improve oral presentation skills? Advanced Science Letters, 23 (8). pp. 7682-7685.

Ilyas, S.U. and Pendyala, R. and Narahari, M. (2017) Rheological behavior of mechanically stabilized and surfactant-free MWCNT-thermal oil-based nanofluids. International Communications in Heat and Mass Transfer, 87 . pp. 250-255.

Ilyas, S.U. and Pendyala, R. and Narahari, M. (2017) Stability and thermal analysis of MWCNT-thermal oil-based nanofluids. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 527 . pp. 11-22.

Ilyas, S.U. and Pendyala, R. and Narahari, M. and Susin, L. (2017) Stability, rheology and thermal analysis of functionalized alumina- thermal oil-based nanofluids for advanced cooling systems. Energy Conversion and Management, 142 . pp. 215-229.

Imran, M. and Liew, M.S. and Nasif, M.S. and Niazi, U.M. and Yasreen, A. (2017) Hazard assessment studies on hydrocarbon fire and blast: An overview. Advanced Science Letters, 23 (2). pp. 1243-1247.

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. and Khan, Z. (2017) Economic analysis and optimization for bio-hydrogen production from oil palm waste via steam gasification. Energy Sources, Part B: Economics, Planning and Policy, 12 (2). pp. 158-165.

Inayat, A. and Ghenai, C. and Ayoub, M. and Eisa, E. (2017) Simulation for the production of synthetic natural gas for vehicles (SNGV) from palm waste via gasification with in-situ CO2 capture. 2017 7th International Conference on Modeling, Simulation, and Applied Optimization, ICMSAO 2017 .

Inayat, A. and Ghenai, C. and Naqvi, M. and Ammar, M. and Ayoub, M. and Hussin, M.N.B. (2017) Parametric Study for Production of Dimethyl Ether (DME) As a Fuel from Palm Wastes. Energy Procedia, 105 . pp. 1242-1249.

Inayat, M. and Sulaiman, S.A. and Kurnia, J.C. (2017) Investigation on the effect of blending ratio and airflow rate on syngas profile produced from co-gasification of blended feedstock. MATEC Web of Conferences, 131 .

Iqbal, A. and Jeoti, V. and Drieberg, M. and Wen, W.P. (2017) Chu sequence based phasing scheme for low PAPR multicarrier waveform for channel sounding. Canadian Conference on Electrical and Computer Engineering .

Iqbal, B. and Muhammad, N. and Jamal, A. and Ahmad, P. and Khan, Z.U.H. and Rahim, A. and Khan, A.S. and Gonfa, G. and Iqbal, J. and Rehman, I.U. (2017) An application of ionic liquid for preparation of homogeneous collagen and alginate hydrogels for skin dressing. Journal of Molecular Liquids, 243 . pp. 720-725.

Iqbal, M.J. and Faye, I. and Said, A.M.D. and Samir, B.B. (2017) Computational Technique for an Efficient Classification of Protein Sequences With Distance-Based Sequence Encoding Algorithm. Computational Intelligence, 33 (1). pp. 32-55.

Iqbal, O. and Ahmad, M. and Abd Kadir, A.P.A. (2017) Geomechanical characterization of potential roseneath shale gas, Cooper basin, Australia. ARPN Journal of Engineering and Applied Sciences, 12 (17). pp. 5221-5231.

Irawan, S. and Kinif, B.I. and Bayuaji, R. (2017) Maximizing drilling performance through enhanced solid control system. IOP Conference Series: Materials Science and Engineering, 267 (1).

Irawan, S. and Permatasari, K.A. and Bayuaji, R. (2017) Effect of density and resistivity measurement for foam flooding propagation in static condition. IOP Conference Series: Materials Science and Engineering, 267 (1).

Irawan, Sonny and Ridha, Syahrir (2017) Development of Stress Model near the Wellbore Using an Iterative Coupling Method. INTERNATIONAL JOURNAL OF GEOMECHANICS .

Irfan, M. and Ahmad, T. and Moniruzzaman, M. and Abdullah, B. (2017) Effect of pH on ionic liquid mediated synthesis of gold nanoparticle using elaiseguineensis (palm oil) kernel extract. IOP Conference Series: Materials Science and Engineering, 204 (1).

Irfan, M. and Moniruzzaman, M. and Ahmad, T. and Mandal, P.C. and Bhattacharjee, S. and Abdullah, B. (2017) Ionic liquid based extraction of flavonoids from Elaeis guineensis leaves and their applications for gold nanoparticles synthesis. Journal of Molecular Liquids, 241 . pp. 270-278.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. (2017) Condition monitoring of induction motors via instantaneous power analysis. Journal of Intelligent Manufacturing, 28 (6). pp. 1259-1267.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Magzoub, M. (2017) An Online Fault Diagnosis System for Induction Motors via Instantaneous Power Analysis. Tribology Transactions, 60 (4). pp. 592-604.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Nor, N.M. and Alwadie, A. and Sheikh, M.A. (2017) A hardware and software integration approach for development of a non-invasive condition monitoring systems for motor-coupled gears faults diagnosis. Communications in Computer and Information Science, 751 . pp. 642-655.

Irfan, S.A. and Razali, R. and KuShaari, K. and Mansor, N. (2017) Reaction-multi diffusion model for nutrient release and autocatalytic degradation of pla-coated controlled-release fertilizer. Polymers, 9 (3).

Irfan, S.A. and Razali, R. and Kushaari, K. and Mansor, N. and Azeem, B. (2017) Analytical solution of diffusion model for nutrient release from controlled release fertilizer. Journal of Physics: Conference Series, 890 (1).

Irfan Khan, M. and Khan, H.U. and Azizli, K. and Sufian, S. and Man, Z. and Siyal, A.A. and Muhammad, N. and Faiz ur Rehman, M. (2017) The pyrolysis kinetics of the conversion of Malaysian kaolin to metakaolin. Applied Clay Science, 146 . pp. 152-161.

Irshad, K. and Habib, K. and Basrawi, F. and Saha, B.B. (2017) Study of a thermoelectric air duct system assisted by photovoltaic wall for space cooling in tropical climate. Energy, 119 . pp. 504-522.

Irshad, K. and Habib, K. and Kareem, M.W. and Basrawi, F. and Saha, B.B. (2017) Evaluation of thermal comfort in a test room equipped with a photovoltaic assisted thermo-electric air duct cooling system. International Journal of Hydrogen Energy, 42 (43). pp. 26956-26972.

Irshad, S. and Rambli, D.R.A. (2017) Advances in mobile augmented reality from user experience perspective: A review of studies. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10645 . pp. 466-477.

Isa, F. and Zabiri, H. and Ramasamy, M. and Tufa, L.D. and Shariff, A.M. and Saleh, S.F. (2017) Pressure modification index based on hydrodynamics and mass transfer effects for modeling of CO2 removal from natural gas via absorption at high pressures. International Journal of Greenhouse Gas Control, 56 . pp. 173-186.

Isa, F. and Zabiri, H. and Singh, S.K.M. and Shariff, A.M. (2017) Dynamic modelling for high pressure CO2 Absorption from Natural Gas. Communications in Computer and Information Science, 752 . pp. 261-271.

Isa , M. Tan (2017) Experimental investigation of the effect of different process variables on the viscosity of sulfonated polyacrylamide copolymers. . .

Isha, A.S.N.B. and Sabir, A.A. and Ghazali, Z.B. and Sharif, M.A.B.M. and Ishak, S.Z. (2017) Proposing a quick assessment tool for heavy vehicle commercial drivers’ fatigue in oil and gas industry of Malaysia. Advanced Science Letters, 23 (8). pp. 7742-7745.

Isha, Ahmad Shahrul Nizam (2017) Context matters: A research agenda to move beyond conventional leadership-safety relationship. Context matters: A research agenda to move beyond conventional leadership-safety relationship .

Isha @ Isa, Ahmad Shahrul Nizam (2017) Health Care Issues: A Risk for Fatal Crashes Amongst Heavy Vehicle Drivers in Oil and Gas Industry. Health Care Issues: A Risk for Fatal Crashes Amongst Heavy Vehicle Drivers in Oil and Gas Industryt .

Ismaeel, A.A. and Al-Kayiem, H.H. and Baheta, A.T. and Aurybi, M.A. (2017) CFD modeling of artificial vortex air generator for green electric power. MATEC Web of Conferences, 131 .

Ismail, I. and Halim, A.H. (2017) Comparative study of meta-heuristics optimization algorithm using benchmark function. International Journal of Electrical and Computer Engineering, 7 (3). pp. 1643-1650.

Ismail, M. and Bustam, M.A. and Man, Z. (2017) Extraction of benzene and cyclohexane using BMIMN(CN)2 and their equilibrium modeling. AIP Conference Proceedings, 1901 .

Ismail, M. and Ludin, N.A. and Hamid, N.H. and Ibrahim, M.A. and Zulfakar, M.S. and Mohamed, N.M. and Sopian, K. (2017) Characterizations of natural dye from garcinia mangostana with graphene oxide (GO) as sensitizer in dye-sensitizer solar cells. AIP Conference Proceedings, 1838 .

Ismail, N.F. and Hasan, M.H. and Mustapha, E.E. (2017) Literature review on technology usage and emotional connection among children. International Conference on Research and Innovation in Information Systems, ICRIIS .

Ismail, S. and Mansor, N. and Man, Z. (2017) A Study on Thermal Behaviour of Thermoplastic Starch Plasticized by Emim Ac and by Emim Cl. Procedia Engineering, 184 . pp. 567-572.

Ismail, S. and Mansor, N. and Man, Z. and Azizli, K.A. (2017) Characterization of tapioca starch plasticized by 1-ethyl-3-methylimidazolium acetate. Jurnal Teknologi, 79 (5-3). pp. 1-7.

Ismail , Mohd Suhaili (2017) Late Cretaceous spore-pollen zonation of the Central African Rift System (CARS), Kaikang Trough, Muglad Basin, South Sudan: angiosperm spread and links to the Elaterates Province. PALYNOLOGY .

Izhar, L.I. and Elamvazuthi, I. and Stathaki, T. and Howell, K. and Omar, Z. (2017) Multimodal image registration for potential diagnosis and monitoring of morphoea using a hybrid NGC method. Proceedings of 2016 1st International Conference on Biomedical Engineering: Empowering Biomedical Technology for Better Future, IBIOMED 2016 .

Izzatie, N.I. and Basha, M.H. and Uemura, Y. and Hashim, M.S.M. and Amin, N.A.M. and Hamid, M.F. (2017) Co-pyrolysis of rice straw and Polyethylene Terephthalate (PET) using a fixed bed drop type pyrolyzer. Journal of Physics: Conference Series, 908 (1).

J

Jaafar, Jafreezal (2017) Comparative analysis of three approaches of antecedent part generation for an IT2 TSK FLS. . .

Jaafar, Jafreezal (2017) Experimental and correlation study of selected physical properties of aqueous blends of potassium sarcosinate and 2-piperidineethanol as a solvent for CO2 capture. Experimental and correlation study of selected physical properties of aqueous blends of potassium sarcosinate and 2-piperidineethanol as a solvent for CO2 capture .

Jaber, A.K. and Awang, M.B. and Awang, Mariyamni (2017) Field-scale investigation of different miscible CO2-injection modes to improve oil recovery in a clastic highly heterogeneous reservoir. Journal of Petroleum Exploration and Production Technology, 7 (1). pp. 125-146.

Jaber, A.K. and Awang, M.B. and Lenn, C.P. and Awang, Mariyamni (2017) Box-Behnken design for assessment proxy model of miscible CO2-WAG in heterogeneous clastic reservoir. Journal of Natural Gas Science and Engineering, 40 . pp. 236-248.

Jafary, T. and Aljlil, S.A. and Alam, J. and Ghasemi, M. (2017) Effect of the membrane type and resistance load on the performance of the microbial fuel cell: A step ahead of microbial desalination cell establishment. Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 96 (9). pp. 346-351.

Jafary, T. and Daud, W.R.W. and Ghasemi, M. and Kim, B.H. and Bakar, M.H.A. and Jahim, J.M. and Ismail, M. and Satar, I. and Kamaruzzaman, M.A. (2017) Assessment of recirculation batch mode of operation in bioelectrochemical system; a way forward for cleaner production of energy and waste treatment. Journal of Cleaner Production, 142 . pp. 2544-2555.

Jafary, T. and Daud, W.R.W. and Ghasemi, M. and Kim, B.H. and Carmona-Martínez, A.A. and Bakar, M.H.A. and Jahim, J.M. and Ismail, M. (2017) A comprehensive study on development of a biocathode for cleaner production of hydrogen in a microbial electrolysis cell. Journal of Cleaner Production, 164 . pp. 1135-1144.

Jagabar Sathik, M.A. and Abdel Aleem, S.H.E. and Kannan, R. and Zobaa, A.F. (2017) A New Switched DC-Link Capacitor-based Multi-level Converter (SDC2MLC). Electric Power Components and Systems, 45 (9). pp. 1001-1015.

Jahan, S. and Sakidin, H. and Nazar, R. and Pop, I. (2017) Boundary layer flow of nanofluid over a moving surface in a flowing fluid using revised model with stability analysis. International Journal of Mechanical Sciences, 131-13 . pp. 1073-1081.

Jahan, S. and Sakidin, H. and Nazar, R. and Pop, I. (2017) Flow and heat transfer past a permeable nonlinearly stretching/shrinking sheet in a nanofluid: A revised model with stability analysis. Journal of Molecular Liquids, 233 . pp. 211-221.

Jalal, A. and Shafiq, N. and Nikbakht, E. and Kumar, R. and Zahid, M. (2017) Mechanical properties of hybrid basalt-polyvinyl alcohol (PVA) fiber reinforced concrete. Key Engineering Materials, 744 . pp. 3-7.

Jamali, A.A. and Nor, N.M. and Ibrahim, T. and Romlie, M.F. (2017) An analytical approach for the sizing and siting of battery-sourced inverters in distribution networks. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Jamaludin, A.A. and Mehat, N.M. and Kamaruddin, S. (2017) Investigating the effects of PDC cutters geometry on ROP using the Taguchi technique. Journal of Physics: Conference Series, 908 (1).

Jamil, A. and Ching, O.P. and Shariff, A.M. (2017) Mixed matrix hollow fibre membrane comprising polyetherimide and modified montmorillonite with improved filler dispersion and CO2/CH4 separation performance. Applied Clay Science, 143 . pp. 115-124.

Janjuhah, H.T. and GÁmez Vintaned, J.A. and Salim, A.M.A. and Faye, I. and Shah, M.M. and Ghosh, D.P. (2017) Microfacies and Depositional Environments of Miocene Isolated Carbonate Platforms from Central Luconia, Offshore Sarawak, Malaysia. Acta Geologica Sinica, 91 (5). pp. 1778-1796.

Jatoi, M.A. and Kamel, N. and López, J.D. and Faye, I. and Malik, A.S. (2017) MSP based source localization using EEG signals. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Jatoi, M.A. and Kamel, N. and Musavi, S.H.A. (2017) Framework for estimating active brain sources using MUSIC and Root MUSIC. ICIEECT 2017 - International Conference on Innovations in Electrical Engineering and Computational Technologies 2017, Proceedings .

Javaid, M.U. and Isha, A.S.N. and Ghazali, Z. (2017) Brief communication on psychosocial work environment and wellbeing in relation to job demands-resources: A study on Malaysian public health perspective. Pertanika Journal of Social Sciences and Humanities, 25 (1). pp. 39-44.

Javaid, M.Y. and Ovinis, M. and Hashim, F.B.M. and Maimun, A. and Ahmed, Y.M. and Ullah, B. (2017) Effect of wing form on the hydrodynamic characteristics and dynamic stability of an underwater glider. International Journal of Naval Architecture and Ocean Engineering, 9 (4). pp. 382-389.

Javaid, M.Y. and Ovinis, M. and Hashim, F.B.M. and Maimun, A. and Ali, S.S.A. and Ahmed, S.A. (2017) Investigation on the dynamic stability of an underwater glider using CFD simulation. USYS 2016 - 2016 IEEE 6th International Conference on Underwater System Technology: Theory and Applications . pp. 230-235.

Javaid, M.Y. and Ovinis, M. and Thirumalaiswamy, N. and Hashim, F.B.M. and Ullah, B. and Maimun, A. (2017) Numerical investigation on the hydrodynamic characteristics of an autonomous underwater glider with different wing layouts. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2588-2592.

Javed, E. and Faye, I. and Malik, A.S. and Abdullah, J.M. (2017) Removal of BCG artefact from concurrent fMRI-EEG recordings based on EMD and PCA. Journal of Neuroscience Methods, 291 . pp. 150-165.

Jawad, Z.A. and Ahmad, A.L. and Low, S.C. and Seng, E.W.T. and Soh, C.F.B. and Sugu, L. and Chew, T.L. (2017) Binding stability of β-CD on MWCNTS: Role of washing cycle on the β-CD coating. Journal of Physical Science, 28 . pp. 145-153.

Jee Chen Hung, C. and Perumal, N. and Elamvazuthi, I. and Tageldeen, M.K. and Khan, M.K.A.A. and Parasuraman, S. (2017) Home-based interactive rehabilitation system for hand. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Jessam, R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2017) CFD simulation of flow control with energy promoters in S-shaped diffuser. ARPN Journal of Engineering and Applied Sciences, 12 (7). pp. 2363-2367.

Jessam, R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2017) Flow control in s-shaped air intake diffuser of gas turbine using proposed energy promoters. MATEC Web of Conferences, 131 .

Jiwa, M.Z. and Kim, D.K. and Mustaffa, Z. and Choi, H.S. (2017) A systematic approach to pipe-in-pipe installation analysis. Ocean Engineering, 142 . pp. 478-490.

Johl, S.K. and Salami, O.L. (2017) Sustainability and corporate governance an investigation on firm performance: A study on Malaysian public listed firms. Advanced Science Letters, 23 (1). pp. 540-544.

Jufar, S.R. and Djuraev, U. and Irawan, S. and Lubis, L.A. (2017) Influence of Saturant on Seismoelectric Coupling Response of Porous Media. IOP Conference Series: Earth and Environmental Science, 88 (1).

Jumbri, K. and Micaelo, N.M. and Abdul Rahman, M.B. (2017) Solvation free energies of nucleic acid bases in ionic liquids. Molecular Simulation, 43 (1). pp. 19-27.

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and M. Shariff, A. (2017) Enhanced gas separation performance using mixed matrix membranes containing zeolite T and 6FDA-durene polyimide. Journal of Membrane Science, 525 . pp. 175-186.

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and M. Shariff, A. (2017) Transport properties of mixed matrix membranes encompassing zeolitic imidazolate framework 8 (ZIF-8) nanofiller and 6FDA-durene polymer: Optimization of process variables for the separation of CO2from CH4. Journal of Cleaner Production, 149 . pp. 80-95.

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2017) Fabrication of 6FDA-durene membrane incorporated with zeolite T and aminosilane grafted zeolite T for CO2/CH4 separation. IOP Conference Series: Materials Science and Engineering, 226 (1).

Jusoh, N. and Yeong, Y.F. and Mohamad, M. and Lau, K.K. and Shariff, A.M. (2017) Rapid-synthesis of zeolite T via sonochemical-assisted hydrothermal growth method. Ultrasonics Sonochemistry, 34 . pp. 273-280.

K

Kadhim, S.K. and Nasif, M.S. and Al-Kayiem, H.H. and Nagarajan, T. and Al Waked, R. (2017) Numerical investigation on the effect of blood flow induced vibration on bileflet artificial heart valve by using fluid structure interaction technique. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2561-2565.

Kadhim Khlief, A. and Ihtsham-Ul-Haq Gilani, S. and Al-Kayiem, H.H. and Mohammad, S.T. (2017) Design and modelling of novel evacuated receiver tube of concentration solar power system by using heliostat stadium arrangement. MATEC Web of Conferences, 131 .

Kai Sheng, O. and Alemu Lemma, T. and Ahsan, S. (2017) PDC Bit Hydraulic & Mud Rheological simulation to model pressure drop across Bit. MATEC Web of Conferences, 131 .

Kajo, I. and Malik, A.S. and Kamel, N. (2017) An evaluation of optical flow algorithms for crowd analytics in surveillance system. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Kakooei, S. and Ismail, M.C. and Raja, B. and Mohebbi, H. and Emamian, S.S. and Moayedfar, M. (2017) Formation of nano-scale FeCO3 protective corrosion product in carbon dioxide-saturated 3 sodium chloride solution. Key Engineering Materials, 740 KE . pp. 3-8.

Kalid, K.S. and Rosli, N. (2017) The design of a schoolchildren identification and transportation tracking system. International Conference on Research and Innovation in Information Systems, ICRIIS .

Kamariah, M.S.I.N. and Harun, W.S.W. and Khalil, N.Z. and Ahmad, F. and Ismail, M.H. and Sharif, S. (2017) Effect of heat treatment on mechanical properties and microstructure of selective laser melting 316L stainless steel. IOP Conference Series: Materials Science and Engineering, 257 (1).

Kamble, R. and Kokare, M. and Deshmukh, G. and Hussin, F.A. and Mériaudeau, F. (2017) Localization of optic disc and fovea in retinal images using intensity based line scanning analysis. Computers in Biology and Medicine, 87 . pp. 382-396.

Kanesan, D. and Ridha, S. and Rao, P. (2017) Formulation of geopolymer cement using mixture of slag and class f fly ash for oil well cementing. IOP Conference Series: Materials Science and Engineering, 201 (1).

Kang, C.H. and Burhanudin, Z.A. and Saheed, M.S.M. and Mohamed, N.M. (2017) Synthesis parameters and transfer techniques of mono-few layer graphene for transparent conductive electrode. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Kang, C.H. and Obama, M.P.E.M. and Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2017) Facile formation of interconnected multi-walled carbon nanotube-graphene nanocomposite for nanoelectronics applications. Key Engineering Materials, 744 . pp. 433-437.

Kannan, R. and Aizuddin, M. and Romlie, M.F. (2017) Design and implementation of material characteristics for capacitive coupling wireless power transfer system. International Journal of Applied Engineering Research, 12 (5). pp. 797-803.

Kannan, R. and Aleem, S.H.E.A. and Zobaa, A.F. and Monem, A.M.A. (2017) Optimal multiple-steps single-tuned harmonic filters under time-varying conditions. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Kannan, R. and Ali, S.S.A. and Farah, A. and Adil, S.H. and Khan, A. (2017) Smart Wearable EEG Sensor. Procedia Computer Science, 105 . pp. 138-143.

Kannan, R. and Angamuthu, R. and Ahmed, K.Y. (2017) Photo energy conversion using synchronous sequential circuit based diode clamp multilevel inverter. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Kannan, R. and Lokesh, N. and Hasan, K.N.M. and Aravind, C.V. (2017) Implementation of one cycle controller for single phase bi-directional converter. International Journal of Applied Engineering Research, 12 (6). pp. 804-812.

Kannan, Ramani (2017) Exploration of Modulation Index in Multi-Level Inverter Using Particle Swarm Optimization Algorithm. 2016 IEEE INTERNATIONAL SYMPOSIUM ON ROBOTICS AND INTELLIGENT SENSORS (IRIS 2016) .

Kareem, M.W. and Habib, K. and Ruslan, M.H. and Saha, B.B. (2017) Thermal performance study of a multi-pass solar air heating collector system for drying of Roselle (Hibiscus sabdariffa). Renewable Energy, 113 . pp. 281-292.

Kareem, M.W. and Habib, K. and Sopian, K. and Ruslan, M.H. (2017) Multi-pass solar air heating collector system for drying of screw-pine leaf (Pandanus tectorius). Renewable Energy, 112 . pp. 413-424.

Karia, S. and Parasuraman, S. and Khan, M.K.A.A. and Elamvazuthi, I. and Debnath, N. and Ali, S.S.A. (2017) Plantar pressure distribution and gait stability: Normal VS high heel. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Kaur, J. and Ahmad, F. and Ullah, S. and Yusoff, P.S.M.M. and Ahmad, R. (2017) The Role of Bentonite Clay on Improvement in Char Adhesion of Intumescent Fire-Retardant Coating with Steel Substrate. Arabian Journal for Science and Engineering, 42 (5). pp. 2043-2053.

Kazmi, D. and Qasim, S. and Harahap, I.S.H. (2017) Evaluation of the causes of Bukit Antarabangsa 2008 landslide by using fault tree analysis. MATEC Web of Conferences, 138 .

Kazmi, D. and Qasim, S. and Harahap, I.S.H. and Baharom, S. and Masood, A. and Imran, M. (2017) A Study on Landslide Risk Management by Applying Fault Tree Logics. MATEC Web of Conferences, 95 .

Khalaji Assadi , M and Shamshirgaran , S.R and Defaee Rad, S (2017) The effect of key parameters on the design of an optimized CAES power plant. MATEC Web of Conferences, 38 .

Khalil, I. and Aziz, A.R.A. and Yusup, S. and Heikal, M. and El-Adawy, M. (2017) Response surface methodology for the optimization of the production of rubber seed/palm oil biodiesel, IDI diesel engine performance, and emissions. Biomass Conversion and Biorefinery, 7 (1). pp. 37-49.

Khan, A. and Ali, S.S.A. and Malik, A.S. and Anwer, A. and Hussain, N.A.A. and Meriaudeau, F. (2017) Control of autonomous underwater vehicle based on visual feedback for pipeline inspection. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Khan, A. and Ali, S.S.A. and Malik, A.S. and Anwer, A. and Meriaudeau, F. (2017) Underwater image enhancement by wavelet based fusion. USYS 2016 - 2016 IEEE 6th International Conference on Underwater System Technology: Theory and Applications . pp. 83-88.

Khan, A. and Ali, S.S.A. and Meriaudeau, F. and Malik, A.S. and Soon, L.S. and Seng, T.N. (2017) Visual feedback–based heading control of autonomous underwater vehicle for pipeline corrosion inspection. International Journal of Advanced Robotic Systems, 14 (3).

Khan, A. and Meriaudeau, F. and Ali, S.S.A. and Malik, A.S. (2017) Underwater image enhancement and dehazing using wavelet based fusion for pipeline corrosion inspection. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Khan, A.M. and Jeoti, V. and Rehman, M. and Jilani, M. (2017) Noise power estimation for broadcasting OFDM systems. Canadian Conference on Electrical and Computer Engineering .

Khan, A.M. and Jeoti, V. and Rehman, M.Z.Ur. and Jilani, M.T. and Zakariya, M.A. (2017) A cyclic correlation-based time domain channel estimation scheme. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Khan, A.S. and Man, Z. and Arvina, A. and Bustam, M.A. and Nasrullah, A. and Ullah, Z. and Sarwono, A. and Muhammad, N. (2017) Dicationic imidazolium based ionic liquids: Synthesis and properties. Journal of Molecular Liquids, 227 . pp. 98-105.

Khan, A.S. and Man, Z. and Bustam, M.A. and Gonfa, G. and Chong, F.K. and Ullah, Z. and Nasrullah, A. and Sarwono, A. and Ahmad, P. and Muhammad, N. (2017) Effect of Structural Variations on the Thermophysical Properties of Protic Ionic Liquids: Insights from Experimental and Computational Studies. Journal of Chemical and Engineering Data, 62 (10). pp. 2993-3003.

Khan, F.U. and Asimullah, and Khan, S.B. and Kamal, T. and Asiri, A.M. and Khan, I.U. and Akhtar, K. (2017) Novel combination of zero-valent Cu and Ag nanoparticles @ cellulose acetate nanocomposite for the reduction of 4-nitro phenol. International Journal of Biological Macromolecules, 102 . pp. 868-877.

Khan, H. and Dominic, P.D.D. (2017) Performance measure of online system acceptance and customer satisfaction through airlines websites in Malaysia. International Journal of Business Innovation and Research, 12 (4). pp. 508-524.

Khan, I. and Shah, N.A. and Dennis, L.C.C. (2017) A scientific report on heat transfer analysis in mixed convection flow of Maxwell fluid over an oscillating vertical plate. Scientific Reports, 7 .

Khan, I. and Usmani, M.A. and Bhat, A.H. and Rather, J.A. and Hassan, S.I. and Mumam, A. (2017) Recent progress on rubber based biocomposites: From carbon nanotubes to ionic liquids. Green Energy and Technology (978331). pp. 91-123.

Khan, J. and Malik, A.S. and Kamel, N. and Das, S.C. and Affandi, A.M. (2017) Effect of color feature normalization on segmentation of color images. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Khan, M.S. and Bavoh, C.B. and Partoon, B. and Lal, B. and Bustam, M.A. and Shariff, A.M. (2017) Thermodynamic effect of ammonium based ionic liquids on CO2 hydrates phase boundary. Journal of Molecular Liquids, 238 . pp. 533-539.

Khan, M.S. and Partoon, B. and Bavoh, C.B. and Lal, B. and Mellon, N.B. (2017) Influence of tetramethylammonium hydroxide on methane and carbon dioxide gas hydrate phase equilibrium conditions. Fluid Phase Equilibria, 440 . pp. 1-8.

Khan, M.Y. and Karim, Z.A.A. and Aziz, A.R.A. and Isa, M Tan (2017) A case study on the influence of selected parameters on microexplosion behavior of water in biodiesel emulsion droplets. Journal of Energy Resources Technology, Transactions of the ASME, 139 (2).

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Shariff, A.M. (2017) High pressure solubility of carbon dioxide (CO2) in aqueous solution of piperazine (PZ) activated N-methyldiethanolamine (MDEA) solvent for CO2 capture. AIP Conference Proceedings, 1891 .

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Shariff, A.M. and Garg, S. (2017) Thermophysical properties of aqueous N-methyldiethanolamine (MDEA) and ionic liquids 1-butyl-3-methylimidazolium trifluoromethanesulfonate bmimOTf, 1-butyl-3-methylimidazolium acetate bmimAc hybrid solvents for CO2 capture. Chemical Engineering Research and Design, 121 . pp. 69-80.

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Shariff, A.M. and Garg, S. (2017) Thermophysical properties of concentrated aqueous solution of N-methyldiethanolamine (MDEA), piperazine (PZ), and ionic liquids hybrid solvent for CO2 capture. Journal of Molecular Liquids, 229 . pp. 221-229.

Khan, Z. and Razali, R.B. and Daud, H. and Nor, N.M. and Firuzabad, M.F. and Krebs, K.L. (2017) A new robust computational approach for the electric power system parameters. Journal of Computational and Theoretical Nanoscience, 14 (3). pp. 1613-1620.

Khan, Z. and Razalia, R. and Daud, H. and Norc, N.M. and Firuzabad, M.F. (2017) The evaluation of the confidence intervals for the state parameters of a DC power system. Journal of Engineering and Applied Sciences, 12 (18). pp. 4544-4550.

Khanh, D.V.K. and Vasant, P.M. and Elamvazuthi, I. and Dieu, V.N. (2017) Geometric optimisation of thermo-electric coolers using simulated annealing. International Journal of Computational Science and Engineering, 14 (3). pp. 279-289.

Khoa, T.H. and Vasant, P.M. and Singh, M.S.B. and Dieu, V.N. (2017) Swarm based mean-variance mapping optimization for convex and non-convex economic dispatch problems. Memetic Computing, 9 (2). pp. 91-108.

Khoo, C.G. and Woo, M.H. and Yury, N. and Lam, M.K. and Lee, K.T. (2017) Dual role of Chlorella vulgaris in wastewater treatment for biodiesel production: Growth optimization and nutrients removal study. Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 96 (8). pp. 290-299.

Khor, C. S. (2017) The Impact of Reaction Parameters on Graphene-like Material Synthesized using Chemical Vapour Deposition. ADVANCES IN MATERIAL & PROCESSING TECHNOLOGIES CONFERENCE .

Kim, D.K. and Lim, H.L. and Kim, M.S. and Hwang, O.J. and Park, K.S. (2017) An empirical formulation for predicting the ultimate strength of stiffened panels subjected to longitudinal compression. Ocean Engineering, 140 . pp. 270-280.

Kim, D.K. and Zalaya, M.A. and Mohd, M.H. and Choi, H.S. and Park, K.S. (2017) Safety assessment of corroded jacket platform considering decommissioning event. International Journal of Automotive and Mechanical Engineering, 14 (3). pp. 4462-4485.

Kiu, S.S.K. and Yusup, S. and Chok, V.S. and Taufiq, A. and Kamil, R.N.M. and Syahrullail, S. and Chin, B.L.F. (2017) Comparison on tribological properties of vegetable oil upon addition of carbon based nanoparticles. IOP Conference Series: Materials Science and Engineering, 206 (1).

Kiu, S.S.K. and Yusup, S. and Soon, C.V. and Arpin, T. and Samion, S. and Kamil, R.N.M. (2017) Tribological investigation of graphene as lubricant additive in vegetable oil. Journal of Physical Science, 28 . pp. 257-267.

Kleyko, D. and Khan, S. and Osipov, E. and Yong, S.-P. (2017) Modality classification of medical images with distributed representations based on cellular automata reservoir computing. Proceedings - International Symposium on Biomedical Imaging . pp. 1053-1056.

Koh, K.J. and Yasreen, A.Y.M. (2017) On Newton-Raphson formulation and algorithm for displacement based structural dynamics problem with quadratic damping nonlinearity. MATEC Web of Conferences, 111 .

Kolandaisamy, I. and Marimuthu, M. and Maran, K. and Sulasi, S. and Fahmida, (2017) Small businesses and effect of capital structure: A conceptual review. International Journal of Economic Research, 14 (19). pp. 365-370.

Kose, U. and Vasant, P. (2017) Fading intelligence theory: A theory on keeping Artificial Intelligence safety for the future. IDAP 2017 - International Artificial Intelligence and Data Processing Symposium .

Krishnan, S. and Rawindran, H. and Sinnathambi, C.M. and Lim, J.W. (2017) Comparison of various advanced oxidation processes used in remediation of industrial wastewater laden with recalcitrant pollutants. IOP Conference Series: Materials Science and Engineering, 206 (1).

Krishnan, S.G. and Harilal, M. and Yar, A. and Vijayan, B.L. and Dennis, J.O. and Yusoff, M.M. and Jose, R. (2017) Critical influence of reduced graphene oxide mediated binding of M (M = Mg, Mn) with Co ions, chemical stability and charge storability enhancements of spinal-type hierarchical MCo2O4 nanostructures. Electrochimica Acta, 243 . pp. 119-128.

Ku Shaari, Ku Zilati and K.K., Lau (2017) Dynamic spreading of droplet on porous surface: Effect of droplet impact velocity and surface porosity. Dynamic spreading of droplet on porous surface: Effect of droplet impact velocity and surface porosity .

Ku Yusoff, T.A.I. and Sokiman, M.S. (2017) Sedimentology and geomorphology analysis of coastal area along pantai penarik, terengganu before and during northeast monsoon season. IOP Conference Series: Earth and Environmental Science, 88 (1).

Kumar, P. and Saheed, M.S.B.M. and Burhanudin, Z.A. (2017) Performance comparison of one &two quantum wells light emitting diodes simulated with COMSOL multiphysics. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Kumar, R. and Mohd Yaseen, A.Y.B. and Shafiq, N. and Jalal, A. (2017) Influence of metakaolin, fly ash and nano silica on mechanical and durability properties of concrete. Key Engineering Materials, 744 . pp. 8-14.

Kunjirama, M. and Saman, N. and Johari, K. and Song, S.-T. and Kong, H. and Cheu, S.-C. and Lye, J.W.P. and Mat, H. (2017) Adsorption affinity and selectivity of 3-ureidopropyltriethoxysilane grafted oil palm empty fruit bunches towards mercury ions. Environmental Science and Pollution Research, 24 (17). pp. 15167-15181.

Kurian, V.J. and Al-Yacouby, A.M. and Khir, A.R.M. (2017) Vortex-Induced Vibration Tests of a Marine Growth Wrapped Cylinder at Subcritical Reynolds Number. MATEC Web of Conferences, 103 .

Kurnia, J.C. and Sasmito, A.P. (2017) Numerical investigation of phase change materials thermal capacitor for pipe flow. MATEC Web of Conferences, 131 .

Kurnia, J.C. and Sasmito, A.P. and Ping, S.I. (2017) Investigation of Heat Transfer on a Rotating Latent Heat Energy Storage. Energy Procedia, 105 . pp. 4173-4178.

Kurnia, J.C. and Sasmito, A.P. and Shamim, T. (2017) Performance evaluation of a PEM fuel cell stack with variable inlet flows under simulated driving cycle conditions. Applied Energy, 206 . pp. 751-764.

Kurnia, J.C. and Sasmito, A.P. and Xu, P. and Mujumdar, A.S. (2017) Performance and potential energy saving of thermal dryer with intermittent impinging jet. Applied Thermal Engineering, 113 . pp. 246-258.

Kusbiantoro, A. and Embong, R. and Shafiq, N. (2017) Adaptation of eco-friendly approach in the production of soluble pozzolanic material. International Journal of Design and Nature and Ecodynamics, 12 (2). pp. 246-253.

Kutty, S.R.M. and Ezechi, E.H. and Khaw, S.G. and Lai, C.L. and Isa, M.H. (2017) Kinetics of heavy metal removal in a suspended and immobilized bioreactors. IOP Conference Series: Materials Science and Engineering, 206 (1).

khalaji assadi, M (2017) Recent progress in perovskite solar cells. Renewable and Sustainable Energy Reviews . (In Press)

L

Lai, G.T. and Mazlan, N.A. and Nadzir, M.S.M. and Rafek, A.G. and Serasa, A.S. and Hussin, A. and Ern, L.K. and Yeok, F.S. (2017) Uniaxial compressive strength of Antarctic Peninsula rocks: Schmidt hammer rebound test. Sains Malaysiana, 46 (5). pp. 677-684.

Lai, K.X. and Kim, D.K. and Chin Wong, E.W. (2017) Effect of vortex induced vibration on fatigue damage of top-tensioned riser subjected to current load. ARPN Journal of Engineering and Applied Sciences, 12 (16). pp. 4796-4803.

Lai, L.S. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2017) Single and Binary CO2/CH4 Separation of a Zeolitic Imidazolate Framework-8 Membrane. Chemical Engineering and Technology, 40 (6). pp. 1031-1042.

Lai, L.S. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2017) Synthesis of zeolitic imidazolate frameworks (ZIF)-8 membrane and its process optimization study in separation of CO2 from natural gas. Journal of Chemical Technology and Biotechnology, 92 (2). pp. 420-431.

Lakshmanan, S. and Murugesan, T. (2017) Chlorate adsorption from chlor-alkali plant brine stream. Water Science and Technology, 76 (1). pp. 87-94.

Lam, M.K. and Yusoff, M.I. and Uemura, Y. and Lim, J.W. and Khoo, C.G. and Lee, K.T. and Ong, H.C. (2017) Cultivation of Chlorella vulgaris using nutrients source from domestic wastewater for biodiesel production: Growth condition and kinetic studies. Renewable Energy, 103 . pp. 197-207.

Langove, N. and Isha, A.S.N. (2017) Interpersonal conflict and turnover intention: The mediating role of psychological well-being. Advanced Science Letters, 23 (8). pp. 7695-7698.

Latief, M. and Khorsidtalab, A. and Saputra, I. and Akmeliawati, R. and Nurashikin, A. and Jaswir, I. and Witjaksono, G. (2017) Rapid lard identification with portable electronic nose. IOP Conference Series: Materials Science and Engineering, 260 (1).

Lavania-Baloo, and Idayu, N. and Salihi, I.U. and Zainoddin, J. (2017) The use of macroalgae (Gracilaria changii) as bio-adsorbent for Copper (II) removal. IOP Conference Series: Materials Science and Engineering, 201 (1).

Lawal, B. and Ali, S.S.A. and Awang, A.B. (2017) Massive MIMO systems for underwater acoustic communication. USYS 2016 - 2016 IEEE 6th International Conference on Underwater System Technology: Theory and Applications . pp. 159-164.

Lawrence, G.D. and Rahmat, R. and Makahleh, A. and Saad, B. (2017) Liquid Chromatographic Analysis of α-Dicarbonyls Using Girard-T Reagent Derivatives. Journal of Chromatographic Science, 55 (10). pp. 1043-1050.

Lebelo, R.S. and Mahlobo, R.K. and Adesanya, S.O. and Muthuvalu, M.S. (2017) On Heat Transfer Analysis for a Sphere of Combustible Material of Variable Thermal Conductivity. IOP Conference Series: Materials Science and Engineering, 269 (1).

Lee, H.C. and Liu, W.-W. and Chai, S.-P. and Mohamed, A.R. and Voon, C.H. and Hashim, U. and Arshad, M.K.M. and Adelyn, P.Y.P. and Huda, A.R.N. and Kahar, S.M. and Hidayah, N.M.S. and Lai, C.W. and Khe, C.-S. (2017) The Impact of Reaction Parameters on Graphene-like Material Synthesized Using Chemical Vapour Deposition. Procedia Engineering, 184 . pp. 460-468.

Lee, H.E. and Liew, M.S. and Zawawi, N.A.W.A. and Toloue, I. (2017) Heave motion prediction of a large barge in random seas by using artificial neural network. AIP Conference Proceedings, 1905 .

Lee, M.Y. and Ho, W.S. and Hashim, H. and Muis, Z.A. and Liu, W.H. and Rozali, N.E.M. and Klemeš, J.J. (2017) Application of electric system cascade analysis for various system configuration. Chemical Engineering Transactions, 61 . pp. 943-948.

Lee, S.-P. and Mellon, N. and Shariff, A.M. and Leveque, J.-M. (2017) Aromatic Polyamines Covalent Triazine Polymer as Sorbent for CO2 Adsorption. IOP Conference Series: Materials Science and Engineering, 226 (1).

Lemaitre, G. and Marti, R. and Rastgoo, M. and Meriaudeau, F. (2017) Computer-aided detection for prostate cancer detection based on multi-parametric magnetic resonance imaging. Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS . pp. 3138-3141.

Lendik, L.S. and Chan, M.Y. and Renganathan, S. and Yap, N.T. (2017) Metaphor and the representations of health and illness among the Semai indigenous community in Malaysia. GEMA Online Journal of Language Studies, 17 (4). pp. 61-83.

Leong, K.-Y. and See, S. and Lim, J.-W. and Bashir, M.J.K. and Lam, M.-K. and Chew, T.-L. (2017) Interaction of key process variables acting on the simultaneous adsorption of phenolics in binary solution: trend and optimization of adsorption. Journal of Industrial Pollution Control, 33 (1). pp. 712-722.

Levêque, J.-M. and Duclaux, L. and Rouzaud, J.-N. and Reinert, L. and Komatsu, N. and Desforges, A. and Afreen, S. and Sivakumar, M. and Kimura, T. (2017) Ultrasonic treatment of glassy carbon for nanoparticle preparation. Ultrasonics Sonochemistry, 35 . pp. 615-622.

Lias, M.R. and Sharif, Z. and Awang, M. and Jailani, A. and Warap, H. (2017) Quasi-static modeling of spur gear time varying strength analysis. ARPN Journal of Engineering and Applied Sciences, 12 (6). pp. 1938-1947.

Liew, M. S. (2017) Tsunami simulation due to seaquake at Manila Trench and Sulu Trench. NATURAL HAZARDS .

Liew, M.S. and Danyaro, K.U. and Mohamad, M. and Shawn, L.E. and Aulov, A. (2017) Ground Motion Prediction Equations for Malaysia Due to Subduction Zone Earthquakes in Sumatran Region. IEEE Access, 5 . pp. 23920-23937.

Lim, E.H. and Wan Ahmad, W.F. and Hashim, A.S. (2017) Enhancement of learning management system by integrating learning styles and adaptive courses. Advances in Intelligent Systems and Computing, 532 . pp. 211-218.

Lim, L.G. and Tang, T.B. (2017) Design of concave capacitance sensor for void fraction measurement in gas-liquid flow. Proceedings of 2016 8th International Conference on Information Technology and Electrical Engineering: Empowering Technology for Better Future, ICITEE 2016 .

Lim, L.G. and Tang, T.B. and Hamid, N.H. and Pao, W.K.S. (2017) Sinusoid based calibration for holdup measurement in two-phase flow using helical capacitance sensor. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Liu, C. and Ghosh, D. (2017) A new seismic attribute for ambiguity reduction in hydrocarbon prediction. Geophysical Prospecting, 65 (1). pp. 229-239.

Liu, W.H. and Alwi, S.R.W. and Hashim, H. and Muis, Z.A. and Klemeš, J.J. and Rozali, N.E.M. and Lim, J.S. and Ho, W.S. (2017) Optimal Design and Sizing of Integrated Centralized and Decentralized Energy Systems. Energy Procedia, 105 . pp. 3733-3740.

Lock, I.S.M. and Lock, S.S.M. and Vo, D.-V.N. and Abdullah, B. (2017) Influence of palladium on Ni-based catalyst for hydrogen production via thermo-catalytic methane decomposition. Chemical Engineering Transactions, 57 . pp. 343-348.

Lock, S.S.M. and Lau, K.K. and Mash’al, A.-A.B. and Shariff, A.M. and Yeong, Y.F. and Mei, I.L.S. and Ahmad, F. (2017) Elucidation on the effect of operating temperature to the transport properties of polymeric membrane using molecular simulation tool. Communications in Computer and Information Science, 752 . pp. 456-471.

Lock, S.S.M. and Lau, K.K. and Mei, I.L.S. and Shariff, A.M. and Yeong, Y.F. and Bustam, A.M. (2017) Molecular simulation and mathematical modelling of glass transition temperature depression induced by CO2 plasticization in Polysulfone membranes. IOP Conference Series: Materials Science and Engineering, 226 (1).

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. (2017) Preliminary techno-economic and environmental assessment of thickness dependent physical aging in oxygen enriched combustion using polymeric membranes. Journal of Cleaner Production, 162 . pp. 914-937.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. (2017) Computational insights on the role of film thickness on the physical properties of ultrathin polysulfone membranes. RSC Advances, 7 (70). pp. 44376-44393.

Loh, S.L. and Lim, S.P. and Chong, S.H. and Ching, D.L.C. (2017) A new local search algorithm for minimum span frequency assignment in mobile communication. Communications in Computer and Information Science, 752 . pp. 116-125.

Losetty, V. and Matheswaran, P. and Wilfred, C.D. (2017) Synthesis, thermophysical properties and COSMO-RS study of DBU based protic ionic liquids. Journal of Chemical Thermodynamics, 105 . pp. 151-158.

Lotfi, M. and Moniruzzaman, M. and Sivapragasam, M. and Kandasamy, S. and Abdul Mutalib, M.I. and Alitheen, N.B. and Goto, M. (2017) Solubility of acyclovir in nontoxic and biodegradable ionic liquids: COSMO-RS prediction and experimental verification. Journal of Molecular Liquids, 243 . pp. 124-131.

Lubis, A.M.H.S. and Ariwahjoedi, B. and Sudin, M. (2017) XPS characterization of tribo-layer formation on the steel lubricated with crude and epoxidized jatropha oil under boundary lubrication. Industrial Lubrication and Tribology, 69 (3). pp. 371-377.

Lun, N.K. and Liew, M.S. and Matori, A.N. and Zawawi, N.A.W.A. (2017) Recent developments in machine learning applications in landslide susceptibility mapping. AIP Conference Proceedings, 1905 .

M

M.H, Isa (2017) Effect of Aging, Antioxidant, and Mono- and Divalent Ions at High Temperature on the Rheology of New Polyacrylamide-Based Co-Polymers. Effect of Aging, Antioxidant, and Mono- and Divalent Ions at High Temperature on the Rheology of New Polyacrylamide-Based Co-Polymers .

M.I., Abdul Mutalib (2017) Novel low viscosity ammonium-based ionic liquids with carboxylate anions: Synthesis, characterization, and thermophysical properties. . .

M.N., Karsiti and V., Jeoti (2017) 2D wavelets Galerkin method for the computation of EM field on seafloor excited by a point source. INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS .

MS Nur Fathiha, SZ Lo, AS Ahmed Mohamed, . (2017) Reservoir Characterization of Lacustrine Environment, Doba Basin, Southern Chad: Radioactive Sand Delineation. Reservoir Characterization of Lacustrine Environment, Doba Basin, Southern Chad: Radioactive Sand Delineation .

Magzoub, M. and Saad, N. and Ibrahim, R. and Irfan, M. (2017) A genetic algorithm optimization of hybrid fuzzy-fuzzy rules in induction motor control. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Mahat, S.Q.A. and Mohd. Saaid, I. (2017) Development of anionic-cationic inhibitors for mitigating silicate scales during ASP flooding. Journal of Petroleum Science and Engineering, 149 . pp. 701-706.

Mahdi, F.P. and Habib, M.M. and Ahad, M.A.R. and McKeever, S. and Moslehuddin, A.S.M. and Vasant, P. (2017) Face recognition-based real-time system for surveillance. Intelligent Decision Technologies, 11 (1). pp. 79-92.

Mahdi, F.P. and Vasant, P. and Abdullah-Al-Wadud, M. and Watada, J. and Kallimani, V. and Fai, P.Y.S. (2017) Quantum particle swarm optimization for economic dispatch problem using cubic function considering power loss constraint. International Journal of GEOMATE, 13 (7). pp. 44-50.

Mahdi, F.P. and Vasant, P. and Rahman, M.M. and Abdullah-Al-Wadud, M. and Watada, J. and Kallimani, V. (2017) Quantum particle swarm optimization for multiobjective combined economic emission dispatch problem using cubic criterion function. 2017 IEEE International Conference on Imaging, Vision and Pattern Recognition, icIVPR 2017 .

Mahesh, K. and Nallagownden, P. and Elamvazuthi, I. (2017) Multi-objective PSO based optimal placement of solar power DG in radial distribution system. Journal of Electrical Systems, 13 (2). pp. 322-331.

Mahesh, K. and Nallagownden, P. and Elamvazuthi, I. (2017) Optimal placement and sizing of distributed generators for voltage-dependent load model in radial distribution system. Renewable Energy Focus, 19-20 . pp. 23-37.

Mahesh, K. and Nallagownden, P. and Elamvazuthi, I. (2017) Optimal placement and sizing of renewable distributed generations and capacitor banks into radial distribution systems. Energies, 10 (6).

Mahgoub, B.K.M. and Hassan, S. and Sulaiman, S.A. and Mamat, R. and Abdul Adam, A. and Hagos, F.Y. (2017) Combustion and performance of syngas dual fueling in a CI engine with blended biodiesel as pilot fuel. BioResources, 12 (3). pp. 5617-5631.

Mahgoub, M.I. and Padmanabhan, E. and Abdullatif, O.M. (2017) Seismic inversion as a predictive tool for porosity and facies delineation in Paleocene fluvial/lacustrine reservoirs, Melut Basin, Sudan. Marine and Petroleum Geology, 86 . pp. 213-227.

Mahinder Singh, Balbir Singh (2017) Swarm based mean-variance mapping optimization for convex and non-convex economic dispatch problems. Swarm based mean-variance mapping optimization for convex and non-convex economic dispatch problems .

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Muhammad, N. and Iqbal, T. and Akil, H.M. (2017) Ionic liquids pretreatment for fabrication of agro-residue/thermoplastic starch based composites: A comparative study with other pretreatment technologies. Journal of Cleaner Production, 161 . pp. 257-266.

Mahmood, T. and Naz, M.Y. and Sulaiman, S.A. and Jamil, Y. and Shukrullah, S. and Zahid, M. and Inayat, M. (2017) CFD Modeling and Experimental Validation of a Solar Still. MATEC Web of Conferences, 131 .

Mahmoud, L. and Shafiq, N. and Fadhil, M. and Thanoon, W. (2017) Interaction between CFRP side plated to R C beams and concrete under shear action. Proceedings of the 5th International Specialty Conference on Fibre Reinforced Materials . pp. 143-151.

Mahzabin, M.S. and Hock, L.J. and Kang, L.S. and Jarghouyeh, E.N. (2017) Performance of mechanical behavior of kenaf fibre reinforced foamed composite. AIP Conference Proceedings, 1892 .

Majeed, Z. and Mansor, N. and Ajab, Z. and Man, Z. (2017) Lignin macromolecule's implication in slowing the biodegradability of urea-crosslinked starch films applied as slow-release fertilizer. Starch/Staerke, 69 (11-12).

Majid, M.A.A. and Fudzin, F. (2017) Study on robots failures in automotive painting line. ARPN Journal of Engineering and Applied Sciences, 12 (1). pp. 62-67.

Majid, M.A.A. and Nordin, A. and Salim, D.A. (2017) Exergoeconomics model for power and chilled water cost rates of gas-fueled district cooling system. International Journal of Applied Engineering Research, 12 (21). pp. 10802-10808.

Majid, M.F.A. and Ismail, M.S. and Rahman, A.H.A. and Mohamed, M.A. (2017) Facies Distribution and Petrophysical Properties of Shoreface-Offshore Transition Environment in Sandakan Formation, NE Sabah Basin. IOP Conference Series: Earth and Environmental Science, 88 (1).

Malakahmad, A. and Ho, L.L.H. (2017) UV/H2O2 oxidation process optimization by response surface methodology for removal of polycyclic aromatic hydrocarbons (PAHs) from water. Desalination and Water Treatment, 65 . pp. 408-417.

Malakahmad, A. and Idrus, N.B. and Abualqumboz, M.S. and Yavari, S. and Kutty, S.R.M. (2017) In-vessel co-composting of yard waste and food waste: an approach for sustainable waste management in Cameron Highlands, Malaysia. International Journal of Recycling of Organic Waste in Agriculture, 6 (2). pp. 149-157.

Malik, A.F. and Jeoti, V. and Fawzy, M. and Iqbal, A. and Aslam, Z. and Pandian, M.S. and Marigo, E. (2017) Estimation of SAW velocity and coupling coefficient in multilayered piezo-substrates AlN/SiO2/Si. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Malkawi, A.B. and Nuruddin, M.F. and Fauzi, A. and Al-Mattarneh, H. and Mohammed, B.S. (2017) Effect of plasticizers and water on properties of HCFA geopolymers. Key Engineering Materials, 733 KE . pp. 76-79.

Man, Zakaria and Bustam, Mohamad Azmi (2017) Dicationic imidazolium based ionic liquids: Synthesis and properties. Journal of Molecular Liquids .

Man, Zakaria and Mansor, nurlidia (2017) A Study on Thermal Behaviour of Thermoplastic Starch Plasticized by [Emim] Ac and by [Emim] Cl. ADVANCES IN MATERIAL & PROCESSING TECHNOLOGIES CONFERENCE .

Man, Zakaria and Nurul, Hasan and Bustam, Azmi and F.K., Chong (2017) Effect of Structural Variations on the Thermophysical Properties of Protic Ionic Liquids: Insights from Experimental and Computational Studies. Effect of Structural Variations on the Thermophysical Properties of Protic Ionic Liquids: Insights from Experimental and Computational Studies .

Man, Zakaria and Sufian, Suriati (2017) The pyrolysis kinetics of the conversion of Malaysian kaolin to metakaolin. The pyrolysis kinetics of the conversion of Malaysian kaolin to metakaolin .

Man, Zakaria and Wan Hamzah, Wan Suzaini (2017) A new approach of probe sonication assisted ionic liquid conversion of glucose, cellulose and biomass into 5-hydroxymethylfurfural. A new approach of probe sonication assisted ionic liquid conversion of glucose, cellulose and biomass into 5-hydroxymethylfurfural .

Mandal, P.C. and Morshed, S.M. (2017) Localization of fugitive methane emission from natural gas distribution network of Titas Gas. Polish Journal of Chemical Technology, 19 (1). pp. 127-131.

Maneth Wanniarachchi, W.A. and Gamage, R.P. and Perera, M.S.A. and Rathnaweera, T.D. and Gao, M. and Padmanabhan, E. (2017) Investigation of depth and injection pressure effects on breakdown pressure and fracture permeability of shale reservoirs: An experimental study. Applied Sciences (Switzerland), 7 (7).

Mannan, H.A. and Mohshim, D.F. and Mukhtar, H. and Murugesan, T. and Man, Z. and Bustam, M.A. (2017) Synthesis, characterization, and CO2 separation performance of polyether sulfone/EMIMTf2N ionic liquid-polymeric membranes (ILPMs). Journal of Industrial and Engineering Chemistry, 54 . pp. 98-106.

Mannan, H.A. and Mukhtar, H. and Murugesan, T. and Man, Z. and Bustam, M.A. and Shaharun, M.S. and Abu Bakar, M.Z. (2017) Prediction of CO2 gas permeability behavior of ionic liquid–polymer membranes (ILPM). Journal of Applied Polymer Science, 134 (17).

Mannan, S. and Nordin, S.M. and Rafik-Galea, S. and Ahmad Rizal, A.R. (2017) The ironies of new innovation and the sunset industry: Diffusion and adoption. Journal of Rural Studies, 55 . pp. 316-322.

Manoharan, L.S. and Teh, H.M. and Lim, C.H. (2017) Wave transmission of submerged breakwaters consisting multiple pipes. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5807-5810.

Manoranjitham, M. and Ooi, L.K. and Savita, K.S. (2017) Touch sensation based computer application to facilitate the learning process of dyslexic children. Advanced Science Letters, 23 (11). pp. 11192-11196.

Mansor, R. and Othman, M. and Kasim, M.M. (2017) Fuzzy reasoning based time series forecasting using weighted subsethood model. Advanced Science Letters, 23 (9). pp. 9094-9097.

Maqsood, K. and Ali, A. and Shariff, A.B.M. and Ganguly, S. (2017) Process intensification using mixed sequential and integrated hybrid cryogenic distillation network for purification of high CO2 natural gas. Chemical Engineering Research and Design, 117 . pp. 414-438.

Mardi, N.H. and Malek, M.A. and Liew, M.S. (2017) Tsunami simulation due to seaquake at Manila Trench and Sulu Trench. Natural Hazards, 85 (3). pp. 1723-1741.

Marik Singh, S.K. and Zabiri, H. and Isa, F. and Shariff, A.M. (2017) Simulation of CO2 rich natural Gas pilot plant carbon dioxide absorption column at elevated pressure using equilibrium and rate based method. Communications in Computer and Information Science, 752 . pp. 327-336.

Marimuthu, Maran and Hassan, Rohail (2017) Determinants of the Performance of Government Linked-Companies (GLCs). [Citation Index Journal] (Submitted)

Marimuthu, Maran and Hassan, Rohail and Tariq, E and Aqeel, R (2017) Ethnic and Gender Diversity in Top Level Management and Firm Performance: A Shareholder's Perspective. [Citation Index Journal] (Submitted)

Marimuthu, Maran and Jan, Amin (2017) Bankruptcy Forecasting Models and the Problem of Endogeneity. A Case of Malaysian Banking Industry. [Citation Index Journal] (In Press)

Marimuthu, T.A. and Mekbib Atnaw, S. and Mardarveran, P.A. and Shu Yi, S. and Binti Usop, M.A. and Bin Md Gapar, M.K. and Binti Rusdan, S.A. and Ramli, R.B.M. and Sulaiman, S.A. (2017) Design and development of solar desalination plant. MATEC Web of Conferences, 131 .

Masrom, S. and Abidin, S.Z.Z. and Omar, N. and Rahman, A.S.A. and Rizman, Z.I. (2017) Dynamic parameterizations of particle swarm optimization and genetic algorithm for facility layout problem. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3195-3201.

Massich, J. and Rastgoo, M. and Lemaître, G. and Cheung, C.Y. and Wong, T.Y. and Sidibé, D. and Mériaudeau, F. (2017) Classifying DME vs normal SD-OCT volumes: A review. Proceedings - International Conference on Pattern Recognition . pp. 1297-1302.

Mat Razali, N.H. and Sulaiman, S.A. and Zaidi Moni, M.N. and Basrawi, M.F. (2017) Pre-treatment of oil palm frond biomass via extensive high temperature drying for gasification process. MATEC Web of Conferences, 131 .

Mat-Shayuti, M.S. and Abdullah, M.Z. and Megat-Yusoff, P.S.M. (2017) Tensile Behaviour and Morphology of Polypropylene/Polycar-bonate/Polypropylene-graft-maleic Anhydride Blends. MATEC Web of Conferences, 109 .

Mathialagan, R. and Mansor, N. and Al-Khateeb, B. and Mohamad, M.H. and Shamsuddin, M.R. (2017) Evaluation of Allicin as Soil Urease Inhibitor. Procedia Engineering, 184 . pp. 449-459.

Mathialagan, R. and Mansor, N. and Shamsuddin, M.R. and Uemura, Y. and Majeed, Z. (2017) Optimisation of Ultrasonic-Assisted Extraction (UAE) of Allicin from Garlic (Allium sativum L.). Chemical Engineering Transactions, 56 . pp. 1747-1752.

Mathulamuthu, S.S. and Asirvadam, V.S. and Dass, S.C. and Gill, B.S. (2017) Cluster based regression model on dengue incidence using dual climate variables. Proceedings - 2016 IEEE Conference on Systems, Process and Control, ICSPC 2016 . pp. 64-69.

Mathulamuthu, S.S. and Asirvadam, V.S. and Dass, S.C. and Gill, B.S. and Loshini, T. (2017) Predicting dengue incidences using cluster based regression on climate data. Proceedings - 6th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2016 . pp. 245-250.

Mathur, N. and Asirvadam, V.S. and Dass, S.C. and Gill, B.S. (2017) Visualization of dengue incidences using expectation maximization (EM) algorithm. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Matori , Abd Nasir (2017) Fuzzy MCDM-based GIS model for subsea oil pipeline route optimization: An integrated approach. MARINE GEORESOURCES & GEOTECHNOLOGY .

Mavukkandy, M.O. and Bilad, M.R. and Kujawa, J. and Al-Gharabli, S. and Arafat, H.A. (2017) On the effect of fumed silica particles on the structure, properties and application of PVDF membranes. Separation and Purification Technology, 187 . pp. 365-373.

Mazher, M. and Abd Aziz, A. and Malik, A.S. and Ullah Amin, H. (2017) An EEG-Based Cognitive Load Assessment in Multimedia Learning Using Feature Extraction and Partial Directed Coherence. IEEE Access, 5 . pp. 14819-14829.

Mazher, M. and Aziz, A.A. and Malik, A.S. (2017) Evaluation of rehearsal effects of multimedia content based on EEG using machine learning algorithms. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Mazlan, M.A.A.A. and Khir, M.H.M. and Saad, N.M. and Dass, S.C. (2017) Wifi fingerprinting indoor positioning with multiple access points in a single base station using probabilistic method. International Journal of Applied Engineering Research, 12 (6). p. 1102.

McIntyre, D. and Naeem, W. and Ali, S.S.A. and Anwer, A. (2017) Underwater surveying and mapping using rotational potential fields for multiple autonomous vehicles. USYS 2016 - 2016 IEEE 6th International Conference on Underwater System Technology: Theory and Applications . pp. 77-82.

Md Hasan, K.N. and Khai, T.X. and Kannan, R. and Zakaria, Z.A. (2017) Harnessing 'Blue energy': A Review on Techniques and Preliminary Analysis. MATEC Web of Conferences, 131 .

Md Nordin, Shahrina (2017) A comprehensive review on theoretical framework-based electric vehicle consumer adoption research. A comprehensive review on theoretical framework-based electric vehicle consumer adoption research .

Md Nordin, Shahrina (2017) The ironies of new innovation and the sunset industry: Diffusion and adoption. The ironies of new innovation and the sunset industry: Diffusion and adoption .

Md Nordin, Shahrina (2017) A market modeling review study on predicting Malaysian consumer behavior towards widespread adoption of PHEV/EV. A market modeling review study on predicting Malaysian consumer behavior towards widespread adoption of PHEV/EV .

Md Rafek, Abdul Ghani (2017) Representing Landslides as Polygon (Areal) or Points? How Different Data Types Influence the Accuracy of Landslide Susceptibility Maps. Sains Malaysiana . ISSN 1266039

Md Rafek, Abdul Ghani (2017) Peak Friction Angle Estimation from Joint Roughness Coefficient of Discontinuities of Limestone in Peninsular Malaysia. . .

Mehat, N.M. and Kamaruddin, S. (2017) Evaluation on the feasibility of using bamboo fillers in plastic gear manufacturing via the Taguchi optimization method. Journal of Physics: Conference Series, 908 (1).

Mehat, N.M. and Mohd Kassim, S. and Kamaruddin, S. (2017) Investigation on the effects of processing parameters on shrinkage behaviour and tensile properties of injection moulded plastic gear via the Taguchi method. Journal of Physics: Conference Series, 908 (1).

Mehat, N.M. and Shahrul, K. (2017) Investigation on wear behavior of bamboo filler reinforcement of injection moulded plastic gear. Key Engineering Materials, 737 KE . pp. 119-123.

Mehrpouya, M. and Emamian, S. (2017) Recent advantages in laser fabrication of micro-channel heat exchangers: Fortschritte in der Herstellung von Mikrokanal Wärmetauschern mittels Laserherstellung. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 205-209.

Memon, A.H. and Bin Ibrahim, T. and Nallagowden, P. (2017) Design analysis, optimization and identification of optimum single-phase linear PM generator using different magnet shape for wave energy conversion. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Memon, A.H. and Ibrahim, T.B. and Nallagoowden, P. (2017) Design development and modelling of linear permanent magnet generator topologies for wave energy conversion. International Journal of Applied Engineering Research, 12 (12). pp. 3329-3336.

Memon, M.K. and Elraies, K.A. and Al-Mossawy, M.I. (2017) Impact of new foam surfactant blend with water alternating gas injection on residual oil recovery. Journal of Petroleum Exploration and Production Technology, 7 (3). pp. 843-851.

Memon, M.K. and Shuker, M.T. and Elraies, K.A. (2017) Study of blended surfactants to generate stable foam in presence of crude oil for gas mobility control. Journal of Petroleum Exploration and Production Technology, 7 (1). pp. 77-85.

Meng, Choong Chee (2017) Late Paleogene rifting along the Malay Peninsula thickened crust. http://www.sciencedirect.com/science/article/pii/S0040195116305893#! .

Mengal, A.N. and Karuppanan, S. and Ovinis, M. (2017) In–plane shear properties of basalt–carbon/epoxy hybrid composite laminates: In–plane Schereigenschaften von Basalt-Kohlenstoff/Epoxy-Hybrid-Verbundlaminaten. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 261-266.

Meyghani, B. and Awang, M. and Emamian, S. (2017) A mathematical formulation for calculating temperature dependent friction coefficient values: Application in friction stir welding (FSW). Defect and Diffusion Forum, 379 . pp. 73-82.

Meyghani, B. and Awang, M. and Emamian, S. and Khalid, N.M. (2017) Developing a finite element model for thermal analysis of friction stir welding by calculating temperature dependent friction coefficient. Lecture Notes in Mechanical Engineering . pp. 107-126.

Mian, M.U. and Dennis, J.O. and Khir, M.H.M. and Sutri, N.Y. and Ahmed, A.Y. and Tang, T.B. (2017) CMOS-MEMS resonator parametric variation analysis through equivalent circuit modeling. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Ming Xiang, L. and Almanna Lubis, L. (2017) Application of Simultaneous Inversion Characterizing Reservoir Properties in X Field, Sabah Basin. IOP Conference Series: Earth and Environmental Science, 88 (1).

Mkayes, A.A. and Saad, N.M. and Faye, I. and Walter, N. (2017) Image histogram and FFT based critical study on noise in fluorescence microscope images. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Mkayes, A.A. and Walter, N. and Saad, N.M. and Faye, I. and Cheong, S.C. and Lim, K.P. (2017) Enhancement of cell visibility and contrast for fluorescence microscope images by subjective and objective analysis of several visual aspects. Lecture Notes in Electrical Engineering, 398 . pp. 321-331.

Moayedfar, M. and Rani, A.M. and Hanaei, H. and Ahmad, A. and Tale, A. (2017) Parameter optimization and stretch enhancement of AISI 316 sheet using rapid prototyping technique. IOP Conference Series: Materials Science and Engineering, 257 (1).

Mobin, M.A. and Masih, M. and Alhabshi, S.O. (2017) Religion of Islam and Microfinance: Does It Make Any Difference? Emerging Markets Finance and Trade, 53 (7). pp. 1547-1562.

Moghaddam, R.N. and Foroozesh, J. (2017) Stress dependent capillary dominated flow in matrix around hydraulic fractures in shale reservoirs and its impact on well deliverability. Society of Petroleum Engineers - SPE Symposium: Production Enhancement and Cost Optimisation 2017 .

Mohamad, A.M. and Hamada, G.M. (2017) Determination techniques of Archie's parameters: A, m and n in heterogeneous reservoirs. Journal of Geophysics and Engineering, 14 (6). pp. 1358-1367.

Mohamed, M. and Yusup, S. and Bustam, M.A. and Azmi, N. (2017) Effect of coal bottom ash & binder addition into CaO-based Sorbent on CO2capture performance. Chemical Engineering Transactions, 56 . pp. 325-330.

Mohamed Baioumy, Hassan (2017) Mineralogy, geochemistry and the origin of high-phosphorus oolitic iron ores of Aswan, Egypt. ORE GEOLOGY REVIEWS .

Mohamed Ramli, Nasser and Abdullah, Bawadi (2017) Online Composition Prediction of a Debutanizer Column Using Artificial Neural Network. Online Composition Prediction of a Debutanizer Column Using Artificial Neural Network .

Mohamed Yousuff, C. and B Hamid, N.H. and Kamal Basha, I.H. and Wei Ho, E.T. (2017) Output channel design for collecting closely-spaced particle streams from spiral inertial separation devices. AIP Advances, 7 (8).

Mohamed Zain, I.F. and Awang, A. and Laouiti, A. (2017) Hybrid MAC protocols in VANET: A survey. Advances in Intelligent Systems and Computing, 548 . pp. 1-14.

Mohammad, M.F. and Rahman, N.A.A. and Hassan, R. and Kurniawan, R. (2017) Multi-Criteria Decision Making (MCDM) for bachelor of aircraft engineering technology (avionic) final year students in project management course: AHP method for career selection. Journal of Engineering and Applied Sciences, 12 (3). pp. 705-714.

Mohammad, S.T. and Al-Kayiem, H.H. and Assadi, M.K. and Gilani, S.I.U. and Khlief, A.K. (2017) Design and modeling of solar parabolic trough power plant with MATLAB. MATEC Web of Conferences, 131 .

Mohammad Shuhaili, F. and Sulaiman, S. and Mahamad, S. and Sarlan, A. (2017) Visual object interface signifier of museum application for large display. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10645 . pp. 582-591.

Mohammed, B.S. and Achara, B.E. and Nuruddin, M.F. and Yaw, M. and Zulkefli, M.Z. (2017) Properties of nano-silica-modified self-compacting engineered cementitious composites. Journal of Cleaner Production, 162 . pp. 1225-1238.

Mohammed, B.S. and Adamu, M. and Shafiq, N. (2017) Establishing relationship between modulus of elasticity and strength of nano silica modified roller compacted rubbercrete. International Journal of GEOMATE, 13 (39). pp. 103-110.

Mohammed, B.S. and Syed, Z.I. and Khed, V. and Qasim, M.S. (2017) Evaluation of nano-silica modified ECC based on ultrasonic pulse velocity and rebound hammer. Open Civil Engineering Journal, 11 . pp. 638-649.

Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusuf, S. (2017) Effects of Pretreatments of Napier Grass with Deionized Water, Sulfuric Acid and Sodium Hydroxide on Pyrolysis Oil Characteristics. Waste and Biomass Valorization, 8 (3). pp. 755-773.

Mohammed, I.Y. and Abakr, Y.A. and Yusup, S. and Alaba, P.A. and Morris, K.I. and Sani, Y.M. and Kazi, F.K. (2017) Upgrading of Napier grass pyrolytic oil using microporous and hierarchical mesoporous zeolites: Products distribution, composition and reaction pathways. Journal of Cleaner Production, 162 . pp. 817-829.

Mohammed, I.Y. and Abakr, Y.A. and Yusup, S. and Kazi, F.K. (2017) Valorization of Napier grass via intermediate pyrolysis: Optimization using response surface methodology and pyrolysis products characterization. Journal of Cleaner Production, 142 . pp. 1848-1866.

Mohammed, I.Y. and Lim, C.H. and Kazi, F.K. and Yusup, S. and Lam, H.L. and Abakr, Y.A. (2017) Co-pyrolysis of Rice Husk with Underutilized Biomass Species: A Sustainable Route for Production of Precursors for Fuels and Valuable Chemicals. Waste and Biomass Valorization, 8 (3). pp. 911-921.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2017) Performance and combustion characteristics of a novel crank-rocker engine. Journal of Mechanical Science and Technology, 31 (7). pp. 3563-3571.

Mohd Arif, N.N. and Harun, N. and Yunus, N.M. and Vo, D.-V.N. and Azizan, M.T. and Zainal Abidin, S. (2017) Reforming of glycerol for hydrogen production over Ni based catalysts: Effect of support type. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 39 (7). pp. 657-663.

Mohd Jani, N. and Shakir Nasif, M. and Shafiq, N. and Pao, W. (2017) Thermal and strength performance of reinforced self-compacting concrete slabs mixed with basalt and PVA fibers in high intensity fire. MATEC Web of Conferences, 131 .

Mohd Laziz, A. and Ku Shaari, K.Z. (2017) CFD simulation of two phase segmented flow in microchannel reactor using volume of fluid model for biodiesel production. Communications in Computer and Information Science, 751 . pp. 336-344.

Mohd Nor, Nursyarizal and Nallagownden, Perumal and Irraivan A/L Elamvazuthi , Irraivan (2017) Building energy for sustainable development in Malaysia: A review. Building energy for sustainable development in Malaysia: A review .

Mohd Shariff, Azmi (2017) Interrelations Between Process Safety Management Elements. Interrelations Between Process Safety Management Elements .

Mohd Shariff, Azmi and Lal, Bhajan (2017) Measurement and prediction of the physical properties of an aqueous sodium salt of L-phenylalanine. JOURNAL OF THE SERBIAN CHEMICAL SOCIETY .

Mohd Sohor, M.A.H. and Mustapha, M. and Chandra Kurnia, J. (2017) Silicon carbide- from synthesis to application: A review. MATEC Web of Conferences, 131 .

Mohd Sohor, M.A.H. and Mustapha, M. and Mamat, O. (2017) Analysis of contributing factors for synthesizing silicon carbide using Taguchi's approach. MATEC Web of Conferences, 131 .

Mohd Sohor, M.A.H. and Mustapha, M. and Mamat, O. (2017) The effect of milling duration on silicon dioxide characterization. MATEC Web of Conferences, 131 .

Mohd Sumery, N.F. and Lo, S.Z. and Salim, A.M.A. (2017) Lacustrine Environment Reservoir Properties on Sandstone Minerals and Hydrocarbon Content: A Case Study on Doba Basin, Southern Chad. IOP Conference Series: Earth and Environmental Science, 88 (1).

Mohd Yassin, A.Y. and Nethercot, D.A. (2017) Non-iterative moment capacities of complex composite beams using Fourier series. International Journal of Advanced Structural Engineering, 9 (1). pp. 37-49.

Mohd Zaid, H.F. and Chong, F.K. and Abdul Mutalib, M.I. (2017) Extractive deep desulfurization of diesel using choline chloride-glycerol eutectic-based ionic liquid as a green solvent. Fuel, 192 . pp. 10-17.

Mohd Zaid, Hasnah (2017) Effect of EM propagation medium on electrorheological characteristics of dielectric nanofluids. JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY .

Mohd Zawawi, M.Z.F. and Elamvazuthi, I. and Aziz, A.A. and Mazlan, S.F. and Ku Abd Rahim, K.N. (2017) Dynamic analysis of three degree of freedom (3-DOF) exoskeleton for lower extremities. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Mohd-Noor, S.-N. and Wong, C.-Y. and Lim, J.-W. and Mah-Hussin, M.-I.-A. and Uemura, Y. and Lam, M.-K. and Ramli, A. and Bashir, M.J.K. and Tham, L. (2017) Optimization of self-fermented period of waste coconut endosperm destined to feed black soldier fly larvae in enhancing the lipid and protein yields. Renewable Energy, 111 . pp. 646-654.

Mohd-Sahib, A.-A. and Lim, J.-W. and Lam, M.-K. and Uemura, Y. and Isa, M.H. and Ho, C.-D. and Kutty, S.R.M. and Wong, C.-Y. and Rosli, S.-S. (2017) Lipid for biodiesel production from attached growth Chlorella vulgaris biomass cultivating in fluidized bed bioreactor packed with polyurethane foam material. Bioresource Technology, 239 . pp. 127-136.

Momeni, M. and Ridha, S. and Hosseiniz, S.J. and Liu, X. and Atashnezhad, A. and Ghaheri, S. (2017) Optimum drill bit selection by using bit images and mathematical investigation. International Journal of Engineering, Transactions B: Applications, 30 (11). pp. 1807-1813.

Monera A Shoieb, Nor Syazwani Zainal Abidin, Chow Weng Sum, Yass, . (2017) Mineralogical and Petrographic Characterization: An Indication of Fractability of Shale Gas Reservoir in the Blue Nile Basin, Sudan. Mineralogical and Petrographic Characterization: An Indication of Fractability of Shale Gas Reservoir in the Blue Nile Basin, Sudan .

Moniruzzaman, M. and Mahmood, H. and Yusup, S. and Akil, H.M. (2017) Exploring ionic liquid assisted pretreatment of lignocellulosic biomass for fabrication of green composite. Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 96 (9). pp. 376-379.

Mousa Ali, E. and Yahaya, N.Z. and Nallagownden, P. and Zakariya, M.A. (2017) A novel rectifying circuit for microwave power harvesting system. International Journal of RF and Microwave Computer-Aided Engineering, 27 (4).

Muhammad, G. and Alsulaiman, M. and Ali, Z. and Mesallam, T.A. and Farahat, M. and Malki, K.H. and Al-nasheri, A. and Bencherif, M.A. (2017) Voice pathology detection using interlaced derivative pattern on glottal source excitation. Biomedical Signal Processing and Control, 31 . pp. 156-164.

Muhammad, N. and Gonfa, G. and Rahim, A. and Ahmad, P. and Iqbal, F. and Sharif, F. and Khan, A.S. and Khan, F.U. and Khan, Z.U.H. and Rehman, F. and Rehman, I.U. (2017) Investigation of ionic liquids as a pretreatment solvent for extraction of collagen biopolymer from waste fish scales using COSMO-RS and experiment. Journal of Molecular Liquids, 232 . pp. 258-264.

Muhammad Rafi Raza, Faiz Ahmad, M.A Omar, Ali S. Muhsan, (2017) Development of defects free stainless steel parts using powder injection molding. Development of defects free stainless steel parts using powder injection molding .

Muhd, F.N. and Amir, F. and Mohamed, M.A.W. and Shafiq, N. and Malkawi, A.B. (2017) Utilization of eafd in concrete composite. Materials Science Forum, 894 MS . pp. 72-75.

Mumtaz, W. and Vuong, P.L. and Xia, L. and Malik, A.S. and Rashid, R.B.A. (2017) An EEG-based machine learning method to screen alcohol use disorder. Cognitive Neurodynamics, 11 (2). pp. 161-171.

Mumtaz, W. and Xia, L. and Ali, S.S.A. and Yasin, M.A.M. and Hussain, M. and Malik, A.S. (2017) Electroencephalogram (EEG)-based computer-aided technique to diagnose major depressive disorder (MDD). Biomedical Signal Processing and Control, 31 . pp. 108-115.

Mumtaz, W. and Xia, L. and Yasin, M.A.M. and Ali, S.S.A. and Malik, A.S. (2017) A wavelet-based technique to predict treatment outcome for Major Depressive Disorder. PLoS ONE, 12 (2).

Muniandy, M. and Sulaiman, S. (2017) Touch sensation as part of multimedia design elements to improve computer accessibility for the blind users. International Conference on Research and Innovation in Information Systems, ICRIIS .

Musa, A.A. and Ben-Awuah, J. and Saad, R. and Andriamihaja, S. (2017) Combined use of 2D electrical resistivity and seismic refraction in hydrogeophysical exploration. Petroleum and Coal, 59 (1). 01-09.

Musah, A.A. and Ghazali, Z. and Isha, S.N.A. (2017) Sources of conflict and conflict management styles in temporary work environment: A case of plant turnaround maintenance workers. International Journal of Project Organisation and Management, 9 (2). pp. 171-193.

Mutafi, M. and Nasif, M. and Pao, W. and Ismail, F. (2017) Numerical investigation on the effect of channelled and unchannelled screens on smoke contamination in atriums upper balconies with open upstand. MATEC Web of Conferences, 131 .

Mutafi, M.A. and Nasif, M.S. and Pao, W. and Ismail, F.B. (2017) Numerical investigation on the effect of balcony open and solid upstand on smoke contamination in atrium balconies. Journal of Physics: Conference Series, 908 (1).

Muthuvairavasamy Ramkumar, David Menier, Manoj Mathew, M Santosh, . (2017) Early Cenozoic rapid flight enigma of the Indian subcontinent resolved: Roles of topographic top loading and subcrustal erosion. Early Cenozoic rapid flight enigma of the Indian subcontinent resolved: Roles of topographic top loading and subcrustal erosion .

Muthuvalu, M.S. and Htun, T.Z. and Aruchunan, E. and Ali, M.K.M. and Sulaiman, J. (2017) Performance Analysis of Half-Sweep Successive Over-Relaxation Iterative Method for Solving Four-Point Composite Closed Newton-Cotes Quadrature System. Proceedings - International Conference on Intelligent Systems, Modelling and Simulation, ISMS . pp. 375-379.

Muthuvalu, M.S. and Sulaiman, J. (2017) Numerical performance of Half-Sweep Geometric Mean (HSGM) iterative method for solving third order Newton–Cotes quadrature system. Lobachevskii Journal of Mathematics, 38 (1). pp. 73-81.

Muzammel, M. and Yusoff, M.Z. and Malik, A.S. and Saad, M.N.M. and Meriaudeau, F. (2017) Motorcyclists safety system to avoid rear end collisions based on acoustic signatures. Proceedings of SPIE - The International Society for Optical Engineering, 10338 .

Muzammel, M. and Yusoff, M.Z. and Malik, A.S. and Saad, M.N.M. and Meriaudeau, F. (2017) Studying the response of drivers against different collision warning systems: A review. Proceedings of SPIE - The International Society for Optical Engineering, 10338 .

Muzammel, M. and Yusoff, M.Z. and Meriaudeau, F. (2017) Rear-end vision-based collision detection system for motorcyclists. Journal of Electronic Imaging, 26 (3).

N

Na, K.L. and Lee, H.E. and Liew, M.S. and Wan Abdullah Zawawi, N.A. (2017) An expert knowledge based decommissioning alternative selection system for fixed oil and gas assets in the South China Sea. Ocean Engineering, 130 . pp. 645-658.

Nadeem, H. and Habib, N.Z. and Aun, N.C. and Zoorob, S.E. and Mustaffa, Z. and Mesney, R. and Suubitaa, S. (2017) Used engine oil as alternate binder for buildings - A comparative study. Proceedings of Institution of Civil Engineers: Waste and Resource Management, 170 (2). pp. 57-65.

Nadeem, H. and Habib, N.Z. and Ng, C.A. and Zoorob, S.E. and Mustaffa, Z. and Chee, S.Y. and Younas, M. (2017) Utilization of catalyzed waste vegetable oil as a binder for the production of environmentally friendly roofing tiles. Journal of Cleaner Production, 145 . pp. 250-261.

Nadeem, S. and Iqbal, F. and Mutalib, M.I.A. and Abdullah, B. and Shaharun, M.S. (2017) Synthesis and characterization of thermally stable zirconia based mesoporous nanosilica with metalloporphyrin encapsulation. AIP Conference Proceedings, 1891 .

Naeem, R. and Yahya, R. and Mansoor, M.A. and Teridi, M.A.M. and Sookhakian, M. and Mumtaz, A. and Mazhar, M. (2017) Photoelectrochemical water splitting over mesoporous CuPbI3 films prepared by electrophoretic technique. Monatshefte fur Chemie, 148 (6). pp. 981-989.

Naffouti, S.E. and Aouissaoui, I. and Fougerolle, Y. and Sakly, A. and Meriaudeau, F. (2017) Enhancement and assessment of WKS variance parameter for intelligent 3D shape recognition and matching based on MPSO. 4th International Conference on Control Engineering and Information Technology, CEIT 2016 .

Naffouti, S.E. and Fougerolle, Y. and Sakly, A. and Mériaudeau, F. (2017) An advanced global point signature for 3D shape recognition and retrieval. Signal Processing: Image Communication, 58 . pp. 228-239.

Nallagowden, P. and Varma, R. and Memonn, A.H. (2017) Performance improvement of synchronous permanent magnet generator for oscillating water column (OWC) wave energy converter. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding . pp. 792-796.

Nallagownden, P. and Hamid Abdalla, E.A. and Mohd Nor, N. and Romlie, M.F. (2017) Optimal chiller loading using improved particle swarm optimization. Lecture Notes in Electrical Engineering, 398 . pp. 103-113.

Nallagownden, P. and Mahesh, K. and Elamvazuthi, I. (2017) A combined-model for uncertain load and optimal configuration of distributed generation in power distribution system. International Journal of Simulation: Systems, Science and Technology, 17 (41). 11.1-11.7.

Namazi-saleh, F. and Kurian, V.J. and Mustaffa, Z. and Tahan, M. and Kim, D. (2017) Effect of bed vicinity on vortex shedding and force coefficients of fluid flow on an offshore pipeline. Journal of Marine Science and Application, 16 (1). pp. 81-86.

Nandiyanto, A.B.D. and Putra, Z.A. and Andika, R. and Bilad, M.R. and Kurniawan, T. and Zulhijah, R. and Hamidah, I. (2017) Porous activated carbon particles from rice straw waste and their adsorption properties. Journal of Engineering Science and Technology, 12 (Specia). pp. 1-11.

Naqvi, S.R. and Uemura, Y. and Yusup, S. and Nishiyama, N. and Naqvi, M. (2017) Catalytic Consequences of Micropore Topology on Biomass Pyrolysis Vapors over Shape Selective Zeolites. Energy Procedia, 105 . pp. 557-561.

Narahari, M. (2017) Buoyancy induced Couette-Poiseuille flow in a vertical microchannel. Journal of Physics: Conference Series, 908 (1).

Narahari, M. and Soorapuraju, S.K.R. and Pendyala, R. and Pop, I. (2017) Transient two-dimensional natural convection flow of a nanofluid past an isothermal vertical plate using Buongiorno's model. International Journal of Numerical Methods for Heat and Fluid Flow, 27 (1). pp. 23-47.

Narahari, M. and Suresh Kumar Raju, S. and Pendyala, R. (2017) Unsteady natural convection flow of multi-phase nanofluid past a vertical plate with constant heat flux. Chemical Engineering Science, 167 . pp. 229-241.

Nasaruddin, M.N. and Zung, L.S. and Md Rafek, A.G. (2017) Petrophysical Analysis of E5 sand group of Sokor Formation, Termit Basin, Niger. IOP Conference Series: Earth and Environmental Science, 88 (1).

Nasif, M.S. and Ahmed, M.A.M. and Hasnain, S.A. and Kamaruzaman, A. and Ismail, F.B. (2017) Numerical investigation of fire spread, evacuation and hazard assessment in an offshore petroleum platform by using cfd simulation. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2566-2569.

Nasr, N.H. and Raza, A. and Mahmood, S.M. and Hematpour, E. (2017) Comparison of permeability correlations for different rock fabric. Journal of Engineering and Applied Sciences, 12 (7). pp. 1853-1858.

Nasrullah, A. and Bhat, A.H. and Isa, M.H. and Danish, M. and Naeem, A. and Muhammad, N. and Khan, T. (2017) Efficient removal of methylene blue dye using mangosteen peel waste: Kinetics, isotherms and artificial neural network (ANN) modeling. Desalination and Water Treatment, 86 . pp. 191-202.

Nayeem, M.M. and Alikhan, L.U.R.L. (2017) Agro-development in Musali by using Muzara'ah supply chain model. International Journal of Economic Research, 14 (15). pp. 127-133.

Naz, M.Y. and Ismail, N.I. and Sulaiman, S.A. and Shukrullah, S. (2017) Characterization of erosion of gas pipelines by dry sand. Instrumentation Science and Technology, 45 (1). pp. 62-72.

Naz, M.Y. and Sulaiman, S.A. and Bou-Rabee, M.A. (2017) Particle tracking velocimetry investigations on density dependent velocity vector profiles of a swirling fluidized bed. Drying Technology, 35 (2). pp. 193-202.

Naz, M.Y. and Sulaiman, S.A. and Mahmood, T. and Hussain, M.I. and Ghaffar, A. and Jamil, Y. and Inayat, M. (2017) Heating Performance Study on a Passive Solar Heater. MATEC Web of Conferences, 131 .

Naz, M.Y. and Sulaiman, S.A. and Shukrullah, S. and Ghaffar, A. and Ibrahim, K.A. and AbdEl-Salam, N.M. (2017) Development of erosion-corrosion mechanisms for the study of steel surface behavior in a sand slurry. Measurement: Journal of the International Measurement Confederation, 106 . pp. 203-210.

Naz, M.Y. and Sulaiman, S.A. and Shukrullah, S. and Ghaffar, A. and Khan, Y. and Ahmad, I. (2017) PIV investigations on particle velocity distribution in uniform swirling regime of fluidization. Granular Matter, 19 (2).

Nazim, R. and Yaacob, R.A.I.R. (2017) Criteria for supplier selection: An application of AHP-SCOR integrated model (ASIM). International Journal of Supply Chain Management, 6 (3). pp. 284-290.

Negash, B.M. and Tufa, L.D. and Ramasamy, M. and Awang, M.B. (2017) System Identification Based Proxy Model of a Reservoir under Water Injection. Modelling and Simulation in Engineering, 2017 .

Negash, B.M. and Vel, A. and Elraies, K.A. (2017) Artificial neural network and inverse solution method for assisted history matching of a reservoir model. International Journal of Applied Engineering Research, 12 (11). pp. 2952-2962.

Ng, H.C. and Khe, C.S. and Aziz, A. and Merican, Z.M.A. and Sokkalingam, R. and Chew, T.L. and Lai, C.W. (2017) Biosynthesis of silver nanoparticles using unriped Carica papaya fruit extract with different PH conditions. International Journal of Nanoparticles, 9 (2). pp. 55-70.

Ng, W.C.K. and Hwang, O.J. (2017) Effect of finite element formulation type on blast wall analysis subjected to explosive loading. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5778-5783.

Ng, Z.G. and Lim, J.W. and Isa, M.H. and Pasupuleti, V.R. and Yunus, N.M. and Lee, K.C. (2017) Adsorptive removal of hexavalent chromium using sawdust: Enhancement of biosorption and bioreduction. Separation Science and Technology (Philadelphia), 52 (10). pp. 1707-1716.

Nizamani, A.A. and Ismail, A.R. and Junin, R. and Dayo, A.Q. and Tunio, A.H. and Ibupoto, Z.H. and Sidek, M.A.M. (2017) Synthesis of titania-bentonite nanocomposite and its applications in water-based drilling fluids. Chemical Engineering Transactions, 56 . pp. 949-954.

Nizamani, Z. and Woan Yih, L. and Wahab, M.M.A. and Mustaffa, Z. (2017) Determination of Correlation for Extreme Metocean Variables. MATEC Web of Conferences, 103 .

Noh, N.F.B.M. and Sulaiman, S. and Noor, A.B.M. (2017) Accessibility matters: The need of Bahasa Melayu (BM) screen reader for the visually impaired internet users. Proceedings - 2016 4th International Conference on User Science and Engineering, i-USEr 2016 . pp. 11-16.

Noor, Z.H. and Humayun, N. and Ng Choon, A. and Salah, E.Z. and Zahiraniza, M. (2017) Sustainable and eco-friendly vege roofing tiles: An innovative bio-composite. Materials Science Forum, 882 . pp. 71-76.

Nor, N.M. and Zemri, N.S. and Daud, S.A. and Ibrahim, T. and Daud, H. (2017) Development of an automated three-phase distribution box system. Indonesian Journal of Electrical Engineering and Computer Science, 6 (2). pp. 233-240.

Nordin, K.H. and Ovinis, M. and Javaid, M.Y. (2017) Study on the effect of wing geometry on underwater glider hydrodynamics. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3101-3104.

Nordin, N. and Abdul Karim, Z.A. and Othman, S. and Raghavan, V.R. and Adzila, S. and Md Seri, S. and Md Taib, I. and Ramli, Y. (2017) Assessment of turbulence model performance adopted near wall treatment for a sharp 90° 3-D turning diffuser. Communications in Computer and Information Science, 751 . pp. 259-273.

Nordin, N. and Karim, Z.A.A. and Othman, S. and Raghavan, V.R. and Batcha, M.F.M. and Hariri, A. and Basharie, S.M. (2017) Flow characteristics of 3-D turning diffuser using particle image velocimetry. AIP Conference Proceedings, 1831 .

Nordin, N.A.H.M. and Ismail, A.F. and Misdan, N. and Nazri, N.A.M. (2017) Modified ZIF-8 mixed matrix membrane for CO2/CH4 separation. AIP Conference Proceedings, 1891 .

Nordin, N.A.H.M. and Ismail, A.F. and Yahya, N. (2017) Zeolitic imidazole framework 8 decorated graphene oxide (ZIF-8/GO) mixed matrix membrane (MMM) for CO2/CH4 separation. Jurnal Teknologi, 79 (1-2). pp. 59-63.

Norlaili, A. and Faiz, A. and Hazwan, A.H. and Fatima, G. and Megat, P.S.M.Y. and Aziz, H. and Rafiq, A. (2017) Synergistic effects of titanium dioxide and zinc borate on thermal degradation and water resistance of epoxy based intumescent fire retardant coatings. Key Engineering Materials, 740 KE . pp. 41-47.

Nugroho, H. and Fei-Lu, S. and Firmansyah, (2017) Developing renewable energy in developing countries: A lesson from Indonesia. Energy Sources, Part B: Economics, Planning and Policy, 12 (4). pp. 318-325.

Nuhu Shuaibu, A. and Faye, I. and Salih Ali, Y. and Kamel, N. and Saad, M.N. and Malik, A.S. (2017) Sparse Representation for Crowd Attributes Recognition. IEEE Access, 5 . pp. 10422-10433.

Nurhanim, K. and Elamvazuthi, I. and Izhar, L.I. (2017) Effect of muscle activities on gait for the lower extremities. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Nurhanim, K. and Elamvazuthi, I. and Izhar, L.I. and Ganesan, T. and Su, S.W. (2017) Development of a model for sEMG based joint-torque estimation using Swarm techniques. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Nurika, O. and Hassan, M.F. and Zakaria, N. and Jung, L.T. (2017) A study of fluctuations in genetic algorithm optimized network in data centre. COMPSE 2016 - 1st EAI International Conference on Computer Science and Engineering .

Nuruddin, M.F. and Puad, N.H.A. and Zaidi, N.H.A. (2017) Effectiveness of aerogel roofing system on temperature reduction in Malaysian residential buildings. Journal of Engineering and Applied Sciences, 12 (16). pp. 4057-4062.

Nurul Asyikin, M.A. and Uemura, Y. and Kusakabe, K. and Mohamad Azmi, B. (2017) Effects of catalyst concentration and residence time on transesterification of palm oil with methanol using a 1.0 mm ID millichannel reactor. Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 96 (5). pp. 153-156.

O

Ofei, T.N. and Bavoh, C.B. and Rashidi, A.B. (2017) Insight into ionic liquid as potential drilling mud additive for high temperature wells. Journal of Molecular Liquids, 242 . pp. 931-939.

Oh , P.C. and Asif, J. (2017) Mixed matrix hollow fibre membrane comprising polyetherimide and modified montmorillonite with improved filler dispersion and CO2/CH4 separation performance. [Citation Index Journal]

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2017) Applications of Taguchi method for optimization of dye solar cell design. Sains Malaysiana, 46 (3). pp. 503-508.

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2017) Dye solar cell design parameter optimization using Silvaco ATHENA and ATLAS. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Omar, M.Y. and Rambli, D.R.A. and Shiratuddin, M.F. (2017) Designing persuasive stroke rehabilitation game: An analysis of persuasion context. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10645 . pp. 559-569.

Ooi, B.L. and Rashid, A. and Aziz, A. (2017) Modelling of Output Power Response for Switched Damping Electromagnetic Energy Harvester. Proceedings - International Conference on Intelligent Systems, Modelling and Simulation, ISMS . pp. 37-41.

Osman, A.B. and Ovinis, M. and Hashim, F.M. and Mohammed, K. and Osei, H. (2017) Time delay estimation using continuous wavelet transform coefficients. Advanced Science Letters, 23 (2). pp. 1299-1303.

Othman, A.R. and Jadee, K.J. and Ismadi, M.-Z. (2017) Mitigating stress concentration through defense hole system for improvement in bearing strength of composite bolted joint, Part 1: Numerical analysis. Journal of Composite Materials, 51 (26). pp. 3685-3699.

Owolabi, A.L. and Al-Kayiem, H.H. and Baheta, A.T. (2017) Performance investigation on a thermal energy storage integrated solar collector system using nanofluid. International Journal of Energy Research, 41 (5). pp. 650-657.

Owolabi, A.L. and Megat-Yusoff, P.S.M. and Said, M.A.M. (2017) Investigation on microstructure and mechanical properties on varying surface region of a serviceexposed IN738 turbine blade. International Journal of Microstructure and Materials Properties, 12 (1-2). pp. 38-54.

P

PC Ooi, SNF Jamaludin, AHA Latif, . (2017) Fracture Network Analysis of Metasedimentary Rock in East Coast Terengganu—An Analogue to Fractured Basement in Malay Basin. Fracture Network Analysis of Metasedimentary Rock in East Coast Terengganu—An Analogue to Fractured Basement in Malay Basin .

Padmanabhan, Eswaran (2017) Geochemistry of Miocene sedimentary rocks from offshore West Baram Delta, Sarawak Basin, Malaysia, South China Sea: implications for weathering, provenance, tectonic setting, paleoclimate and paleoenvironment of deposition. Geochemistry of Miocene sedimentary rocks from offshore West Baram Delta, Sarawak Basin, Malaysia, South China Sea: implications for weathering, provenance, tectonic setting, paleoclimate and paleoenvironment of deposition .

Padmanabhan, Eswaran and Baioumy, Hassan Mohamed (2017) Characterization of Alkali-Induced Quartz Dissolution Rates and Morphologies. Characterization of Alkali-Induced Quartz Dissolution Rates and Morphologies .

Pal, A. and Shahrom, M.S.R. and Moniruzzaman, M. and Wilfred, C.D. and Mitra, S. and Thu, K. and Saha, B.B. (2017) Ionic liquid as a new binder for activated carbon based consolidated composite adsorbents. Chemical Engineering Journal, 326 . pp. 980-986.

Palaniappan, T. and Saman, N. and Mat, H. and Johari, K. (2017) Synthesis and characterization of sulfur-functionalized silica nanocapsules as mercury adsorbents. AIP Conference Proceedings, 1901 .

Pampouchidou, A. and Simantiraki, O. and Vazakopoulou, C.-M. and Chatzaki, C. and Pediaditis, M. and Maridaki, A. and Marias, K. and Simos, P. and Yang, F. and Meriaudeau, F. and Tsiknakis, M. (2017) Facial geometry and speech analysis for depression detection. Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS . pp. 1433-1436.

Pao, W. and Hon, L. and Saieed, A. and Ban, S. (2017) Numerical simulation of two-phase slug flow with liquid carryover in different diameter ratio T-junction. Journal of Physics: Conference Series, 908 (1).

Pao, W. and Saieed, A. and Hashim, F.M. and Norpiah, R.B.M. (2017) Numerical simulation of two–phase separation in a small diameter ratio T-junction: Numerische Simulation der Zweiphasentrennung in einem T-Knoten mit kleinem Durchmesser. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 255-260.

Pao, W. and Sam, B. and Nasif, M.S. and Norpiah, R.B.M. (2017) Numerical validation of two-phase slug flow and its liquid holdup correlation in horizontal pipeline. Key Engineering Materials, 740 KE . pp. 173-182.

Pao, William K. S. (2017) Numerical analyses for improved terminal velocity of deep water torpedo anchor. INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW .

Parimi, A.M. and Elamvazuthi, I. and Kumar, A.V.P. and Cherian, V. (2017) Fuzzy logic based control for IPFC for damping low frequency oscillations in multimachine power system. Proceedings - 2015 IEEE IAS Joint Industrial and Commercial Power Systems / Petroleum and Chemical Industry Conference, ICPSPCIC 2015 . pp. 32-36.

Pasha, M. and Zaini, D. and Mohd Shariff, A. (2017) Inherently safer design for heat exchanger network. Journal of Loss Prevention in the Process Industries, 48 . pp. 55-70.

Patel, A. and Alhussian, H. and Pedersen, J.M. and Bounabat, B. and Júnior, J.C. and Katsikas, S. (2017) A nifty collaborative intrusion detection and prevention architecture for Smart Grid ecosystems. Computers and Security, 64 . pp. 92-109.

Patrick, D.O. and Yusup, S. and Osman, N.B. and Zabiri, H. and Shahbaz, M. (2017) Performance of water-leached coal bottom ash as catalyst in Thermogravimetric Analyser (TGA) biomass gasification. Chemical Engineering Transactions, 61 . pp. 1681-1686.

Pedapati, S.R. and Paramaguru, D. and Awang, M. (2017) Microhardness and microstructural studies on underwater Friction Stir Welding of 5052 Aluminum Alloy. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2 .

Pedapati, S.R. and Shasidaran, and Kamal, S. and Rani, A.M.A. (2017) Optimum welding parameter for GMA welding using soft computing techniques. AIP Conference Proceedings, 1901 .

Pedapati, S.R. and Sidiq, A.B. and Awang, M. and Hashim, F.M. and Jebaraj, S. (2017) Effect of bevel angles on tensile strength of SS304 steel weld joints. Lecture Notes in Mechanical Engineering . pp. 95-106.

Perumal, V. and Mohamed, N.M. and Saheed, M.S.M. and Saheed, M.S.M. (2017) Template-assisted growth of highly oriented 3D graphene pH sensor towards new avenues for biosensor. Proceedings of the 2017 IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2017 . pp. 50-53.

Pierre, D.M. and Zakaria, N. (2017) Stochastic partially optimized cyclic shift crossover for multi-objective genetic algorithms for the vehicle routing problem with time-windows. Applied Soft Computing Journal, 52 . pp. 863-876.

Pirzada, N. and Nayan, M.Y. and Subhan, F. and Abro, A. and Hassan, M.F. and Sakidin, H. (2017) Location Fingerprinting Technique for WLAN Device-Free Indoor Localization System. Wireless Personal Communications, 95 (2). pp. 445-455.

Plucar, J. and Grunt, O. and Vasant, P. and Zelinka, I. (2017) Modelling business processes using evolutionary generated petri nets. COMPSE 2016 - 1st EAI International Conference on Computer Science and Engineering .

Ponnusamy, V. and Jung, L.T. and Ramachandran, T. and Zaman, N. (2017) Bio-inspired energy scavenging in wireless ad hoc network. ICIEECT 2017 - International Conference on Innovations in Electrical Engineering and Computational Technologies 2017, Proceedings .

Prakasan, A. and Ovinis, M. and Javaid, M.Y. (2017) A numerical investigation of the drag forces on a fleet of underwater gliders. Advanced Science Letters, 23 (2). pp. 1272-1276.

Pratama, E. and Ismail, M.S. and Ridha, S. (2017) Screening criteria of optimum carbon dioxide injection for enhanced coalbed methane recovery and prediction of carbon dioxide storage capacity: A case study in south sumatera basin, Indonesia. Chemical Engineering Transactions, 56 . pp. 997-1002.

Pratama, E. and Ismail, M.S. and Ridha, S. and Buntoro, A. (2017) An alternative approach for dynamic modeling in a complexly structured and heterogeneous carbonate gas reservoir: a field case study. Arabian Journal of Geosciences, 10 (16).

Pratama, E. and Suhaili Ismail, M. and Ridha, S. (2017) An integrated workflow to characterize and evaluate low resistivity pay and its phenomenon in a sandstone reservoir. Journal of Geophysics and Engineering, 14 (3). pp. 513-519.

Prathama, Y.B.H. and Shapiai, M.I. and Aris, S.A.M. and Ibrahim, Z. and Jaafar, J. and Fauzi, H. (2017) Common spatial pattern with feature scaling (FSc-CSP) for motor imagery classification. Communications in Computer and Information Science, 751 . pp. 591-604.

Q

Qadir, D. and Mukhtar, H. and Keong, L.K. (2017) Monitoring and physico-chemical assessment of ex-mining pools in Perak, Malaysia. Malaysian Journal of Science, 36 (1). pp. 32-46.

Qadir, D. and Mukhtar, H. and Keong, L.K. (2017) Retention of sulfate and chloride ions in commercially available tubular membranes. Membrane Water Treatment, 8 (4). pp. 369-380.

Qadir, D. and Mukhtar, H.B. and Keong, L.K. (2017) Rejection of divalent ions in commercial tubular membranes: Effect of feed concentration and anion type. Sustainable Environment Research, 27 (2). pp. 103-106.

Qayyum, A. and Malik, A.S. and Saad, N.M. and Iqbal, M. and Faris Abdullah, M. and Rasheed, W. and Rashid Abdullah, T.A. and Bin Jafaar, M.Y. (2017) Scene classification for aerial images based on CNN using sparse coding technique. International Journal of Remote Sensing, 38 (8-10). pp. 2662-2685.

Qayyum, A. and Malik, A.S. and Saad, N.M. and bin Abdullah, M.F. and Iqbal, M. and Rasheed, W. and Bin Ab Abdullah, A.R. and Hj Jaafar, M.Y. (2017) Measuring height of high-voltage transmission poles using unmanned aerial vehicle (UAV) imagery. Imaging Science Journal, 65 (3). pp. 137-150.

Qazi, E.-H. and Hussain, M. and Aboalsamh, H. and Malik, A.S. and Ullahamin, H. and Bamatraf, S. (2017) Single trial EEG patterns for the prediction of individual differences in fluid intelligence. Frontiers in Human Neuroscience, 10 .

Quraish, K.S. and Bustam, M.A. and Krishnan, S. and Aminuddin, N.F. and Azeezah, N. and Ghani, N.A. and Uemura, Y. and Lévêque, J.M. (2017) Ionic liquids toxicity on fresh water microalgae, Scenedesmus quadricauda, Chlorella vulgaris & Botryococcus braunii; selection criterion for use in a two-phase partitioning bioreactor (TPPBR). Chemosphere, 184 . pp. 642-651.

Quraishi, K.S. and Bustam, M.A. and Krishnan, S. and Khan, M.I. and Wilfred, C.D. and Lévêque, J.-M. (2017) Thermokinetics of alkyl methylpyrrolidinium NTf2 ionic liquids: Effect of alkyl chain on thermal stability. Journal of Thermal Analysis and Calorimetry, 129 (1). pp. 261-270.

Qureshi, S. and Yahya, N. and Kait, C.F. and Alqasem, B. and ur Rehman, Z. and Irfan, M. (2017) Enhanced catalytic activity of α-Fe2O3 with the adsorption of gases for ammonia synthesis. Materials Science Forum, 880 . pp. 15-18.

R

Rabih, A.A.S. and Dennis, J.O. and Khir, M.H.Md. and Ahmed, M.G. (2017) Study of damping effect on CMOS-MEMS resonator for biomarker detection in exhaled breath. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Rabih, A.A.S. and Khir, M.H.M. and Ahmed, A.Y. and Mian, M.U. and Dennis, J.O. and Ahmed, M.G.A. and Abdulgadir, A.-A.I. (2017) MetalMUMPs resonator for acetone vapor sensing. Proceedings of the 2017 IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2017 . pp. 5-9.

Rahmah, A.U. and Harimurti, S. and Murugesan, T. (2017) Experimental investigation on the effect of wastewater matrix on oxytetracycline mineralization using UV/H2O2 system. International Journal of Environmental Science and Technology, 14 (6). pp. 1225-1233.

Rahman, N.A. and Yusup, S. (2017) Gas condensate conversion into high octane gasoline. Journal of Engineering and Applied Sciences, 12 (Specia). pp. 5624-5629.

Rahman, N.A.A. and Mohammad, M.F. and Rahim, S.A. and Hassan, R. and Ahmad, M.F. and Kadir, S.A. (2017) Shipper's perceptions of aviation Logistics Service Quality (LSQ) of air freight provider. Journal of Engineering and Applied Sciences, 12 (3). pp. 699-704.

Rahman, S.A. and Taghizadeh, S.K. and Ramayah, T. and Alam, M.M.D. (2017) Technology acceptance among micro-entrepreneurs in marginalized social strata: The case of social innovation in Bangladesh. Technological Forecasting and Social Change, 118 . pp. 236-245.

Rahman, Z.H.A. and Khir, M.H.Md. and Burhanudin, Z.A. (2017) Modeling and simulation analysis of micro thermoelectric generator. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Raj, J.J. and Wilfred, C.D. and Shah, S.N. and Pranesh, M. and Abdul Mutalib, M.I. and Lethesh, K.C. (2017) Physicochemical and thermodynamic properties of imidazolium ionic liquids with nitrile and ether dual functional groups. Journal of Molecular Liquids, 225 . pp. 281-289.

Rajabi, M.S. and Moniruzzaman, M. and Mahmood, H. and Sivapragasam, M. and Bustam, M.A. (2017) Extraction of β-carotene from organic phase using ammonium based ionic liquids. Journal of Molecular Liquids, 227 . pp. 15-20.

Ramasamy, M. and Dhanapal, D. and Murugesan, P. (2017) Effects of FDI spillover on regional productivity: Evidence from panel data analysis using stochastic frontier analysis. International Journal of Emerging Markets, 12 (3). pp. 427-446.

Rameshkumar, K. and Indragandhi, V. and Palanisamy, K. and Kannan, R. (2017) A novel current control technique for photo voltaic integrated single phase shunt active power filter. International Journal of Renewable Energy Research, 7 (4). pp. 1710-1722.

Ramkumar, M. and Menier, D. and Mathew, M. and Santosh, M. and Siddiqui, N.A. (2017) Early Cenozoic rapid flight enigma of the Indian subcontinent resolved: Roles of topographic top loading and subcrustal erosion. Geoscience Frontiers, 8 (1). pp. 15-23.

Ramli, A. (2017) Development of Mo/γ-Al2O3-CeO2 catalyst with high thermal stability by modified impregnation method. Materials Science Forum, 888 MS . pp. 491-495.

Ramli, A.S. and Basrawi, F. and Daing Idris, D.M.N. and Bin Yusof, M.H. and Khalil Ibrahim, T. and Mustafa, Z. and Sulaiman, S.A. (2017) A new dewatering technique for stingless bees honey. MATEC Web of Conferences, 131 .

Ramli, N.M. and Hussain, M.A. and Jan, B.M. and Abdullah, B. (2017) Online composition prediction of a debutanizer column using artificial neural network. Iranian Journal of Chemistry and Chemical Engineering, 36 (2). pp. 153-174.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2017) Stability evaluation of three-layered journal bearing with slip/partial slip. Industrial Lubrication and Tribology, 69 (3). pp. 334-341.

Rasheed, W. and Neoh, Y.Y. and Bin Hamid, N.H. and Reza, F. and Idris, Z. and Tang, T.B. (2017) Early visual analysis tool using magnetoencephalography for treatment and recovery of neuronal dysfunction. Computers in Biology and Medicine, 89 . pp. 573-583.

Rasheed, W. and Tang, T.B. and Hamid, N.H. (2017) Threshold for computing generalized model of default mode network connectivity. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Rashid, A.S.A. and Black, J.A. and Kueh, A.B.H. and Mohamad, H. and Noor, N.M. (2017) Bearing capacity charts of soft soil reinforced by deep mixing. Proceedings of the Institution of Civil Engineers: Ground Improvement, 170 (1). pp. 12-25.

Rashid, A.S.A. and Shirazi, M.G. and Mohamad, H. and Sahdi, F. (2017) Bearing capacity of sandy soil treated by Kenaf fibre geotextile. Environmental Earth Sciences, 76 (12).

Rashid, R. and Perumal, N. and Elamvazuthi, I. and Tageldeen, M.K. and Khan, M.K.A.A. and Parasuraman, S. (2017) Mobile robot path planning using Ant Colony Optimization. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Rashid, T. and Kait, C.F. and Murugesan, T. (2017) Effect of alkyl chain length on the thermophysical properties of pyridinium carboxylates. Chinese Journal of Chemical Engineering, 25 (9). pp. 1266-1272.

Rashid, Z. and Wilfredand, C.D. and Murugesan, T. (2017) Effect of hydrophobic ionic liquids on petroleum asphaltene dispersion and determination using UV-visible spectroscopy. AIP Conference Proceedings, 1891 .

Rashidi, A. and Abdullah, Z. and Kashif, S. (2017) Study on the fluid dynamics of nitrogen and hydrogen gases subjected to wires element in monolithic channel. MATEC Web of Conferences, 111 .

Rasool, F. and Drieberg, M. and Badruddin, N. and Mahinder Singh, B.S. (2017) PV panel modeling with improved parameter extraction technique. Solar Energy, 153 . pp. 519-530.

Rasool, F. and Drieberg, M. and Badruddin, N. and Singh, B. and Singh, M. (2017) Modeling of PV panels performance based on datasheet values for solar micro energy harvesting. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Rathinam, A. and Karthikeyan, T. and Ramani, K. (2017) Electric vehicle by using modified topology of multilevel inverter. International Journal of Vehicle Structures and Systems, 9 (1). pp. 47-52.

Rauf, M. and Yahya, N. and Sagayan, V. and Nyamasvisva, T.E. and Rostami, A. (2017) Improved hydrocarbon reservoir detection using enhanced transmitter. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Ravichandar, S. and Wilfred, C.D. and Chong, F.K. and Ng, Z.G. (2017) Synthesis, characterization and application of 1-(2-cyanoethyl)-3-(3-methoxypropane)imidazolium bromide for CO2 capture. MATEC Web of Conferences, 111 .

Rawindran, H. and Krishnan, S. and Sinnathambi, C.M. (2017) A Review on overboard CEOR discharged produced water treatment and remediation. IOP Conference Series: Materials Science and Engineering, 206 (1).

Raza, M.Q. and Nadarajah, M. and Hung, D.Q. and Baharudin, Z. (2017) An intelligent hybrid short-term load forecasting model for smart power grids. Sustainable Cities and Society, 31 . pp. 264-275.

Raza, M.R. and Ahmad, F. and Muhamad, N. and Sulong, A.B. and Omar, M.A. and Akhtar, M.N. and Aslam, M. and Sherazi, I. (2017) Effects of debinding and sintering atmosphere on properties and corrosion resistance of powder injection molded 316 L - Stainless steel. Sains Malaysiana, 46 (2). pp. 285-293.

Raziqin, A. and John, K.V. and Yee, N.C. (2017) Effect of Sacrificial Anodes on Hydrodynamic Coefficients of Jacket Members Subjected to Regular Waves. MATEC Web of Conferences, 111 .

Redzuan, M. and Saw, C.L. and Lew, W.C. and Choong, C.G. and Salvinder, S. and Al-Kayiem, H.H. and Lukmon, A. (2017) Numerical simulation of pcm intergrated solar collector storage water heater. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3363-3367.

Rehman, M. and Baharudin, Z. and Nallagownden, P. and Islam, B. (2017) Modelling and efficiency-analysis of wireless power transfer using magnetic resonance coupling. Indonesian Journal of Electrical Engineering and Computer Science, 6 (3). pp. 563-571.

Rehman, M. and Safdar, S. and Mahmood, A.K. and Amin, A. and Salleh, R. (2017) Personality traits and knowledge sharing behavior of software engineers. ICIT 2017 - 8th International Conference on Information Technology, Proceedings . pp. 6-11.

Rehman, M.Z.U. and Baharudin, Z. and Zakariya, M.A. and Khir, M.H.M. (2017) Development of 7 GHz bowtie shaped substrate integrated waveguide bandpass filter with emphasis on inter-resonator coupling. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Ridha, S. and Lubis, L.A. and Setiawan, R.A. and Razif Mohar, J.M.B. (2017) Investigation on mixed oil-cement for wellbore integrity using acoustic velocity. Key Engineering Materials, 740 KE . pp. 190-194.

Ridha, S. and Pratama, E. and Ismail, Mohd.S. (2017) Performance assessment of CO2 sequestration in a horizontal well for enhanced coalbed methane recovery in deep unmineable coal seams. Chemical Engineering Transactions, 56 . pp. 589-594.

Riman, N.I.S. and Abdullah, M.F. and Romlie, M.F. and Baharudin, Z. (2017) The third harmonic current contribution during three-phase to ground fault. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Rojek, T. and Gubler, L. and Nasef, M.M. and Abouzari-Lotf, E. (2017) Polyvinylamine-Containing Adsorbent by Radiation-Induced Grafting of N-Vinylformamide onto Ultrahigh Molecular Weight Polyethylene Films and Hydrolysis for CO2 Capture. Industrial and Engineering Chemistry Research, 56 (20). pp. 5925-5934.

Romastarika, R. and Jaya, R.P. and Yaacob, H. and Nazri, F.M. and Agussabti, and Ichwana, and Jayanti, D.S. (2017) Effect of black rice husk ash on the physical and rheological properties of bitumen. AIP Conference Proceedings, 1875 .

Rosidi, A. and Ginta, T.L. and Abdul Rani, A.M.B. (2017) Optimization of bone drilling parameters using Taguchi method based on finite element analysis. IOP Conference Series: Materials Science and Engineering, 203 (1).

Roslan, N.S. and Amin, H.U. and Izhar, L.I. and Saad, M.N.M. and Sivapalan, S. (2017) Role of EEG delta and beta oscillations during problem solving tasks. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Rosli, M.A. and Ali, A. and Yahaya, N.Z. (2017) Development of RF energy harvesting technique for Li-Fi application. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Rosli, N. and Ibrahim, R. and Ismail, I. and Hassan, S.M. and Chung, T.D. (2017) Neural network architecture selection for efficient prediction model of gas metering system. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Rosli, N.S. and Ibrahim, R. and Ismail, I. (2017) Intelligent Prediction System for Gas Metering System using Particle Swarm Optimization in Training Neural Network. Procedia Computer Science, 105 . pp. 165-169.

Rosli, N.S. and Ibrahim, R. and Ismail, I. (2017) Neural network model with particle swarm optimization for prediction in gas metering systems. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Rouhi, J. and Kakooei, S. and Ismail, M.C. and Karimzadeh, R. and Mahmood, M.R. (2017) Development of iridium oxide sensor for surface pH measurement of a corroding metal under deposit. International Journal of Electrochemical Science, 12 (11). pp. 9933-9943.

Rozali, N.E.M. and Alwi, S.R.W. and Ho, W.S. and Manan, Z.A. and Klemeš, J.J. (2017) PoPA - Sharps: A new framework for cost-effective design of hybrid power systems. Chemical Engineering Transactions, 56 . pp. 559-564.

Rozali, N.E.M. and Zaki, S.A.A.S.M. and Ho, W.S. and Liu, W.H. and Alwi, S.R.W. and Manan, Z.A. and Klemeš, J.J. (2017) Study of the effects of peak/off-peak load shifting on hybrid power system storage using Power Pinch Analysis. Chemical Engineering Transactions, 61 . pp. 1519-1524.

Rubab, S. and Hassan, M.F. and Mahmood, A.K. and Shah, S.N.M. (2017) Proactive job scheduling and migration using artificial neural networks for volunteer grid. COMPSE 2016 - 1st EAI International Conference on Computer Science and Engineering .

S

Sabet, M. and Soleimani, H. (2017) The impact of electron beam irradiation on Low density polyethylene and Ethylene vinyl acetate. IOP Conference Series: Materials Science and Engineering, 204 (1).

Sabir, A.A. and Isha, A.S.N.B. (2017) Health care issues: A risk for fatal crashes amongst heavy vehicle drivers in oil and gas industry. Journal of Medical Imaging and Health Informatics, 7 (3). pp. 729-732.

Sadig, H. and Sulaiman, S.A. and Said, M.A. (2017) Effect of producer gas staged combustion on the performance and emissions of a single shaft micro-gas turbine running in a dual fuel mode. Journal of the Energy Institute, 90 (1). pp. 132-144.

Sadig, H. and Sulaiman, S.A. and Zaidi Moni, M.N. and Anbealagan, L.D. (2017) Characterization of date palm frond as a fuel for thermal conversion processes. MATEC Web of Conferences, 131 .

Saeid, E. and Jeoti, V. and Samir, B.B. (2017) Per-antenna signal to leakage noise ratio precoding for MU-MIMO-OFDM system with reduced feedback. International Journal of Information and Communication Technology, 10 (2). pp. 206-217.

Saeidi, T. and Bin Ismail, I. and Saleh, V. and Alhawari, A.R.H. (2017) Triple band modified 90 degree Koch fractal H-slot microstrip antenna. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Saeidi, T. and Bin Ismail, I. and Zakariya, M.A. and Alhawari, A.R.H. (2017) Harmonic control of triple-band microstrip antenna using photonic band gap approach. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Safdar, S. and Akbar, R. and Hassan, M.F. and Sharef, B.T. and Hajjar, K. and Qureshi, M.A. (2017) Mechanism to continue system availability during cyber threat scenario. Proceedings of the 11th International Conference on Ubiquitous Information Management and Communication, IMCOM 2017 .

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Perumal, V. and Saheed, M.S.M. (2017) DC magnetron sputtered TiO2 thin film as efficient hole blocking layer for perovskite solar cell. Proceedings of the 2017 IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2017 . pp. 46-49.

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Saheed, M.S.M. (2017) Precursor and pressure dependent 3D graphene: A study on layer formation and type of carbon material. Diamond and Related Materials, 79 . pp. 93-101.

Said, M.A. and Hassan, S. and Nor, M.F.M. (2017) Experimental Investigation of Micro-Gas Turbine Performance at Reduced Air Inlet Temperature. MATEC Web of Conferences, 131 .

Sakai, H. and Nakata, M. and Watada, J. (2017) A proposal of machine learning by rule generation from tables with non-deterministic information and its prototype system. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10313 . pp. 535-551.

Sakidin, H. and Sudhakaran, P. and Saad, M.S. and Rozali, S.S. and Nasarudin, A.H. and Almashhor, A.A. (2017) Development of eco-friendly washing machine. MATEC Web of Conferences, 131 .

Salam, M.A. and Abdullah, B. (2017) Catalysis mechanism of Pd-promoted γ-alumina in the thermal decomposition of methane to hydrogen: A density functional theory study. Materials Chemistry and Physics, 188 . pp. 18-23.

Salam, M.A. and Abdullah, B. and Islam, M.A. (2017) Temperature programmed analysis of hydrogenation and dehydrogenation of magnesium (Mg), nickel (Ni) and aluminum (Al) containing mixed oxides. Chemical Engineering Research and Design, 118 . pp. 103-111.

Salam, M.A. and Sufian, S. (2017) A DFT study of hydrogen adsorption kinetics and thermodynamics on mixed oxides of Mg0.5Ni0.25O1.13. Journal of Engineering and Applied Sciences, 12 (17). pp. 4431-4436.

Salihi, I.U. and Kutty, S.R.M. and Isa, M.H. (2017) Adsorption of Lead ions onto Activated Carbon derived from Sugarcane bagasse. IOP Conference Series: Materials Science and Engineering, 201 (1).

Salleh, S.N.M. and Zainon, N.M. and Abdullah, M.Z. (2017) The effect of oleic acid as post spinning treatment on tensile strength of polyacrylonitrile fibers. AIP Conference Proceedings, 1901 .

Sam, B. and Pao, W.K.S. and Nasif, M.S. and Ofei, T.N. (2017) Preliminary numerical simulation of steady-state gas-liquid flow in horizontal T-junction. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2570-2575.

Saman, A.B.S.H.M. and Lotfy, A.H. (2017) An implementation of SLAM with extended Kalman filter. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Saman, N. and Johari, K. and Song, S.-T. and Kong, H. and Cheu, S.-C. and Mat, H. (2017) High removal efficacy of Hg(II) and MeHg(II) ions from aqueous solution by organoalkoxysilane-grafted lignocellulosic waste biomass. Chemosphere, 171 . pp. 19-30.

Sang, W.Y. and Ching, O.P. (2017) Tailoring MCM-41 mesoporous silica particles through modified sol-gel process for gas separation. AIP Conference Proceedings, 1891 .

Saravanan, D.D.A. and Murugesan, T. and Arunagiri, A. (2017) Determination of design parameters for the cloud point extraction of remazol turquoise blue G-133 dye using triton X-114 surfactant. Desalination and Water Treatment, 60 . pp. 228-241.

Sardar, S. and Wilfred, C.D. and Leveque, J.M. (2017) One-pot mannich base synthesis using task specific protic ionic liquids Sintesis bes mannich tunggal menggunakan cecair ionik terkhusus. Malaysian Journal of Analytical Sciences, 21 (5). pp. 1203-1209.

Sarwono, A. and Man, Z. and Muhammad, N. and Khan, A.S. and Hamzah, W.S.W. and Rahim, A.H.A. and Ullah, Z. and Wilfred, C.D. (2017) A new approach of probe sonication assisted ionic liquid conversion of glucose, cellulose and biomass into 5-hydroxymethylfurfural. Ultrasonics Sonochemistry, 37 . pp. 310-319.

Sasmito, A.P. and Kurnia, J.C. and Birgersson, E. and Mujumdar, A.S. (2017) Computational evaluation of thermal management strategies in an underground mine. Applied Thermal Engineering, 90 .

Sasmito, A.P. and Kurnia, J.C. and Shamim, T. and Mujumdar, A.S. (2017) Optimization of an open-cathode polymer electrolyte fuel cells stack utilizing Taguchi method. Applied Energy, 185 . pp. 1225-1232.

Satar, I. and Daud, W.R.W. and Kim, B.H. and Somalu, M.R. and Ghasemi, M. (2017) Immobilized mixed-culture reactor (IMcR) for hydrogen and methane production from glucose. Energy, 139 . pp. 1188-1196.

Satar, I. and Ghasemi, M. and Aljlil, S.A. and Isahak, W.N.R.W. and Abdalla, A.M. and Alam, J. and Daud, W.R.W. and Yarmo, M.A. and Akbarzadeh, O. (2017) Production of hydrogen by Enterobacter aerogenes in an immobilized cell reactor. International Journal of Hydrogen Energy, 42 (14). pp. 9024-9030.

Sattar, S. and Zulkifli, T.Z.A. (2017) A 2.4/5.2-GHz Concurrent Dual-Band CMOS Low Noise Amplifier. IEEE Access, 5 . pp. 21148-21156.

Sautter, B. and Pubellier, M. and Jousselin, P. and Dattilo, P. and Kerdraon, Y. and Choong, C.M. and Menier, D. (2017) Late Paleogene rifting along the Malay Peninsula thickened crust. Tectonophysics, 710-71 . pp. 205-224.

Savita, K.S. and Muniandy, M. and Ain, Z.N. and Mehat, M. (2017) A mobile based environmental education for primary schoolchildren in Malaysia. International Conference on Research and Innovation in Information Systems, ICRIIS .

Sebastian, P. and Voon, Y.V. and Comley, R. (2017) Parametric tracking across multiple cameras. Pertanika Journal of Science and Technology, 25 (S). pp. 159-168.

Sedighi, M. and Ghasemi, M. and Jahangiri, A. (2017) Catalytic performance of CeAPSO-34 molecular sieve with various cerium content for methanol conversion to olefin. Korean Journal of Chemical Engineering, 34 (4). pp. 997-1003.

Seng, L.K. and Ovinis, M. and Nagarajan, and Seulin, R. and Morel, O. (2017) Vision-based state estimation of an unmanned aerial vehicle. Trends in Bioinformatics, 10 (1). pp. 11-19.

Senivasan, S. and Drieberg, M. and Singh, B.S.M. and Sebastian, P. and Hiung, L.H. (2017) An MPPT micro solar energy harvester for wireless sensor networks. Proceedings - 2017 IEEE 13th International Colloquium on Signal Processing and its Applications, CSPA 2017 . pp. 159-163.

Serasa, A.S. and Lai, G.T. and Rafek, A.G. and Hussin, A. and Khai Ern, L. and Mohamed, T.R. (2017) Peak friction angle estimation from joint roughness coefficient of discontinuities of limestone in peninsular Malaysia. Sains Malaysiana, 46 (2). pp. 181-188.

Sethi, M.A.J. and Hussin, F.A. and Hamid, N.H. (2017) Bio-inspired fault tolerant network on chip. Integration, the VLSI Journal, 58 . pp. 155-166.

Sethi, M.A.J. and Hussin, F.A. and Hamid, N.H. (2017) Biologically inspired network on chip fault tolerant algorithm using time division multiplexing. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Shafiai, S.H. and Shahruzzaman, D.B. and Xien, G.J. and Latheef, M. (2017) Lattice Boltzmann Method of a Flooding Accident at Gopeng, Perak, Malaysia. Mathematical Problems in Engineering, 2017 .

Shafie, S.N.A. and Man, Z. and Idris, A. (2017) Development of polycarbonate-silica matrix membrane for CO2/CH4 separation. AIP Conference Proceedings, 1891 .

Shafiq, N. and Nuruddin, M.F. (2017) Effectiveness of adhesive bonding in structural steel connections. Proceedings of the 10th International Conference on Inspection, Appraisal, Repairs and Maintenance of Structures . pp. 345-351.

Shah, M.U.H. and Sivapragasam, M. and Moniruzzaman, M. and Talukder, M.M.R. and Yusup, S.B. and Goto, M. (2017) Production of sophorolipids by Starmerella bombicola yeast using new hydrophobic substrates. Biochemical Engineering Journal, 127 . pp. 60-67.

Shah, S.A.A. and Tang, T.B. and Faye, I. and Laude, A. (2017) Blood vessel segmentation in color fundus images based on regional and Hessian features. Graefe's Archive for Clinical and Experimental Ophthalmology, 255 (8). pp. 1525-1533.

Shah, S.N.M. and Mahmood, A.K. and Rubab, S. and Hassan, M.F. (2017) Experimental performance analysis of job scheduling algorithms on computational grid using real workload traces. COMPSE 2016 - 1st EAI International Conference on Computer Science and Engineering .

Shahabudin, N. and Ibrahim, T. and Zamri, N.A.M. (2017) Portable pico linear generator design with different magnet shapes for wave energy conversion system. International Journal of Power Electronics and Drive Systems, 8 (1). pp. 360-366.

Shahbaz, M. and Yusup, S. and Ammar, M. and Inayat, A. and Patrick, D.O. (2017) Development of process flow sheet for syngas production from sorption enhanced steam gasification of palm kernel shell. Chemical Engineering Transactions, 61 . pp. 1675-1680.

Shahbaz, M. and Yusup, S. and Inayat, A. and Patrick, D.O. and Pratama, A. and Ammar, M. (2017) Optimization of hydrogen and syngas production from PKS gasification by using coal bottom ash. Bioresource Technology, 241 . pp. 284-295.

Shahbaz, M. and Yusup, S. and Naz, M.Y. and Sulaiman, S.A. and Inayat, A. and Partama, A. (2017) Fluidization of palm kernel shell, palm oil fronds, and empty fruit bunches in a swirling fluidized bed gasifier. Particulate Science and Technology, 35 (2). pp. 150-157.

Shaheen, A.-U.-R. and Hussin, F.A. and Hamid, N.H. (2017) False path identification algorithm framework for nonseparable controller-data path circuits. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Shaheen, A.-U.-R. and Hussin, F.A. and Hamid, N.H. (2017) A hybrid delay design-for-testability for nonseparable RTL controller-data path circuits. Journal of Circuits, Systems and Computers, 26 (2).

Shaheen, Ateeq ur Rehman and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2017) A Hybrid Delay Design-for-Testability for Nonseparable RTL Controller-Data path Circuits. Journal of Circuits, Systems and Computers . ISSN 1793-6454

Shahid, M.U. and Mohamed, N.M. and Khatani, M. and Muhsan, A.S. and Samsudin, A. and Irshad, M.I. and Zaine, S.N.A. (2017) Graphene modified FTO/TiO2 interface photoelectrode for improved performance of dye sensitized solar cells. AIP Conference Proceedings, 1901 .

Shaikh, M.S. and Shariff, A.M. and Garg, S. and Bustam, M.A. (2017) Physical properties of aqueous solutions of potassium l-prolinate from 298.15 to 343.15 K at atmospheric pressure. Chemical Papers, 71 (7). pp. 1185-1194.

Shamim, A. and Ghazali, Z. and Albinsson, P.A. (2017) Construction and validation of customer value co-creation attitude scale. Journal of Consumer Marketing, 34 (7). pp. 591-602.

Shamshirgaran, S.R. and Assadi, M.K. and Al-Kayiem, H.H. and Sharma, K.V. (2017) Investigation of thermal behaviour, pressure drop, and pumping power in a Cu nanofluid-filled solar flat-plate collector. MATEC Web of Conferences, 131 .

Shamsuddin, A. (2017) Structural Analysis: Folds Classification of metasedimentary rock in the Peninsular Malaysia. IOP Conference Series: Earth and Environmental Science, 88 (1).

Shamsuddin, A. and Ghosh, D. and Shahar, S. (2017) Geological features based on Spectral Decomposition: Techniques and examples from the Malay Basin. IOP Conference Series: Earth and Environmental Science, 88 (1).

Shamsuddin, R.M. and Borhan, A. and Lim, W.K. (2017) Humic acid batteries derived from vermicomposts at different C/N ratios. IOP Conference Series: Materials Science and Engineering, 206 (1).

Shamsuddin, S.Z. and Hermana, M. and Ghosh, D.P. and Salim, A.M.A. (2017) Reducing Uncertainties in Hydrocarbon Prediction through Application of Elastic Domain. IOP Conference Series: Earth and Environmental Science, 88 (1).

Shannan, N.M. and Yahaya, N.Z. and Singha, B. and Salam, Z. and Ahmed, K.Y. (2017) Theoretical analysis of the series parasitic resistance in photovoltaic cell. 2017 IEEE 8th Control and System Graduate Research Colloquium, ICSGRC 2017 - Proceedings . pp. 73-76.

Shariffudin, K.A. and Karuppanan, S. and Patil, S.S. (2017) Finite element analysis of residual stress in cold expanded plate with different thickness and expansion ratio. IOP Conference Series: Materials Science and Engineering, 257 (1).

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. (2017) Effect of Unbalanced Voltage Supply Diagnosis Through Rotor Harmonics Signature and State Transitions. PECON 2016 - 2016 IEEE 6th International Conference on Power and Energy, Conference Proceeding . pp. 546-551.

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. and Bakhsh, S.T. and Irfan, M. and Saad, N.B. (2017) An intelligent automated method to diagnose and segregate induction motor faults. Journal of Electrical Systems, 13 (2). pp. 241-254.

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. and Bin Hamdan, M.F. (2017) A new method for detection of unbalanced voltage supply through rotor harmonics and symbolic state dynamics. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Sheng, L.W. and Basri, E.I. and Kamaruddin, S. (2017) Analysis on the effect of shop floor parameters on the effectiveness of preventive maintenance through discrete event simulation. Pertanika Journal of Science and Technology, 25 (1). pp. 1-16.

Shoaib, M. and Hamid, N.H. and Jan, M.T. and Ali, N.B.Z. (2017) Effects of edge cracks on the dynamics of piezoelectric cantilever based MEMS sensor. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Shoaib, M. and Hamid, N.H. and Tariq Jan, M. and Zain Ali, N.B. (2017) Effects of Crack Faults on the Dynamics of Piezoelectric Cantilever-Based MEMS Sensor. IEEE Sensors Journal, 17 (19). pp. 6279-6294.

Sholagberu, A.T. and Mustafa, M.R. and Yusof, K.W. and Hashim, A.M. (2017) Geo-statistical based susceptibility mapping of soil erosion and optimization of its causative factors: A conceptual framework. Journal of Engineering Science and Technology, 12 (11). pp. 2880-2895.

Shuaibu, A.N. and Malik, A.S. and Faye, I. (2017) Behavior representation in visual crowd scenes using space-time features. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Shuaibu, A.N. and Malik, A.S. and Faye, I. and Ali, Y.S. (2017) Pedestrian group attributes detection in crowded scenes. Proceedings - 3rd International Conference on Advanced Technologies for Signal and Image Processing, ATSIP 2017 .

Shukla, V. and Hussin, F.A. and Hamid, N.H. and Ali, N.B.B.Z. (2017) Investigation of capacitance dependence on droplet volume in MEDA based biochips. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Shukla, V. and Hussin, F.A. and Hamid, N.H. and Ali, N.B.Z. and Chakrabarty, K. (2017) Offline Error Detection in MEDA-Based Digital Microfluidic Biochips Using Oscillation-Based Testing Methodology. Journal of Electronic Testing: Theory and Applications (JETTA), 33 (5). pp. 621-635.

Shukri, S.R.M. and Howes, A. (2017) Reward conditions modify children’s drawing behaviour. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10645 . pp. 455-465.

Siddiqui, N.A. and Mathew, M.J. and Menier, D. and Hassaan, M. (2017) 2D and 3D seismic simulation for fault modeling: exploratory revision from the Gullfaks field. Journal of Petroleum Exploration and Production Technology, 7 (2). pp. 417-432.

Siddiqui, N.A. and Rahman, A.H.A. and Sum, C.W. and Mathew, M.J. and Hassaan, M. and Menier, D. (2017) Generic hierarchy of sandstone facies quality and static connectivity: an example from the Middle-Late Miocene Miri Formation, Sarawak Basin, Borneo. Arabian Journal of Geosciences, 10 (11).

Siddiqui, Numair Ahmed (2017) 2D and 3D seismic simulation for fault modeling: exploratory revision from the Gullfaks field. 2D and 3D seismic simulation for fault modeling: exploratory revision from the Gullfaks field .

Sidibé, D. and Sankar, S. and Lemaître, G. and Rastgoo, M. and Massich, J. and Cheung, C.Y. and Tan, G.S.W. and Milea, D. and Lamoureux, E. and Wong, T.Y. and Mériaudeau, F. (2017) An anomaly detection approach for the identification of DME patients using spectral domain optical coherence tomography images. Computer Methods and Programs in Biomedicine, 139 . pp. 109-117.

Simon, N. and De Roiste, M. and Crozier, M. and Rafek, A.G. (2017) Representing landslides as polygon (areal) or points? How different data types influence the accuracy of landslide susceptibility maps. Sains Malaysiana, 46 (1). pp. 27-34.

Singh, D. and Ismail, F.B. and Shakir Nasif, M. (2017) Hybrid Intelligent Warning System for Boiler tube Leak Trips. MATEC Web of Conferences, 131 .

Singh, K.S.M.J. and Elamvazuthi, I. and Shaari, K.Z.K. and Lima, F.V. (2017) PID tuning control strategy using Cuckoo search algorithm for pressure plant. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Singh, V. and Elamvazuthi, I. and Jeoti, V. and George, J. and Kumar, D. (2017) Clinical assessment of injured ankle ATFL ligaments based on ultrasound imaging in the athletes. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Siti Nur Sakinah Jamaludin, Shahnor Basri, Faizal Mustapha, Dewa, . (2017) Phase Contamination Characterization of Stepwise-Built Functionally Graded Hydroxyapatite/Titanium (HA/Ti) Sintered under Various Atmospheres. Phase Contamination Characterization of Stepwise-Built Functionally Graded Hydroxyapatite/Titanium (HA/Ti) Sintered under Various Atmospheres .

Sivapalan, S. (2017) Sustainability, blended learning and the undergraduate communication skills classroom: negotiating engineering undergraduates’ expectations and perceptions. On the Horizon, 25 (1). pp. 7-23.

Socheatra, S. and Wen, W.P. and Cheong, L.Y. (2017) Dual-band bandstop filter based on predistortion hybrid reflection function. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Soeung, S. and Wong, P.W. and Cheab, S. (2017) Highly selective lossy dual-band bandstop filter synthesis and design based on predistortion hybrid dual-band elliptic reflection function. Progress in Electromagnetics Research Letters, 66 . pp. 15-23.

Soh, B. and Pao, W. and Chen, X.H. (2017) Numerical analyses for improved terminal velocity of deep water torpedo anchor. International Journal of Numerical Methods for Heat and Fluid Flow, 27 (2). pp. 428-443.

Sovann, N. and Nallagownden, P. and Baharudin, Z. (2017) Electricity load forecasting using hybrid wavelet neural network based on parallel prediction method. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Subekti, S. and Bayuaji, R. and Darmawan, M.S. and Husin, N.A. and Wibowo, B. and Anugraha, B. and Irawan, S. and DIbiantara, D. (2017) Review: Potential strength of fly ash-based geopolymer paste with substitution of local waste materials with higherature effect. IOP Conference Series: Materials Science and Engineering, 267 (1).

Subhani, A.R. and Malik, A.S. and Kamil, N. and Naufal, M. and Saad, M. (2017) Using resting state coherence to distinguish between low and high stress groups. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Subhani, A.R. and Malik, A.S. and Kamil, N. and Saad, M.N.M. (2017) Difference in brain dynamics during arithmetic task performed in stress and control conditions. IECBES 2016 - IEEE-EMBS Conference on Biomedical Engineering and Sciences . pp. 695-698.

Subhani, A.R. and Mumtaz, W. and Saad, M.N.B.M. and Kamel, N. and Malik, A.S. (2017) Machine learning framework for the detection of mental stress at multiple levels. IEEE Access, 5 . pp. 13545-13556.

Sulaiman, S. A. (2017) Effect of producer gas staged combustion on the performance and emissions of a single shaft micro-gas turbine running in a dual fuel mode. Journal of the Energy Institute .

Sulaiman, S.A. and Biga, B.K. and Chala, G.T. (2017) Injection of non-reacting gas into production pipelines to ease restart pumping of waxy crude oil. Journal of Petroleum Science and Engineering, 152 . pp. 549-554.

Sulaiman, S.A. and Mat Razali, N.H. and Zaidi Bin Moni, M.N. and Inayat, M. (2017) Pre-treatment of oil palm fronds biomass for gasification. MATEC Web of Conferences, 131 .

Sulaiman, S.A. and Zakeria, A.F. and Ramely, M.F. and Zaidi Moni, M.N. and Basrawi, M.F. (2017) Effect of ventilation on thermal comfort in campus hostel bedrooms after sunset. MATEC Web of Conferences, 131 .

Sulaiman, Shaharin Anwar (2017) Modeling and Parametric Study for Maximizing Heating Value of Gasification Syngas. BIORESOURCES .

Sulaiman, Shaharin Anwar (2017) Using artificial neural networks to estimate solar radiation in Kuwai. Using artificial neural networks to estimate solar radiation in Kuwai .

Sulaimon, A.A. and Adeyemi, B.J. and Rahimi, M. (2017) Performance enhancement of selected vegetable oil as base fluid for drilling HPHT formation. Journal of Petroleum Science and Engineering, 152 . pp. 49-59.

Sulaimon, A.A. and Tajuddin, M.Z.M. (2017) Application of COSMO-RS for pre-screening ionic liquids as thermodynamic gas hydrate inhibitor. Fluid Phase Equilibria, 450 . pp. 194-199.

Sulaimon, Aliyu Adebayo (2017) Performance Assessment of Plant Extracts as Green Demulsifiers. Performance Assessment of Plant Extracts as Green Demulsifiers .

Suleman, H. and Maulud, A.S. and Man, Z. (2017) Experimental measurement and thermodynamic modeling of the solubility of carbon dioxide in aqueous blends of monoethanolamine and diethanolamine. AIP Conference Proceedings, 1901 .

Suleman, H. and Maulud, A.S. and Man, Z. (2017) Reconciliation of outliers in CO2-alkanolamine-H2O datasets by robust neural network winsorization. Neural Computing and Applications, 28 (9). pp. 2621-2632.

Suleman, H. and Maulud, A.S. and Man, Z. (2017) A thermodynamic model for determination of carbon dioxide solubility and ionic speciation in aqueous alkanolamine solutions. Journal of the Chemical Society of Pakistan, 39 (3). pp. 374-383.

Sultan, N.S.H. and Chellappan, L.K. and Hamzah, W.S.W. and Marc, L.J. and Mutalib, M.I.A. (2017) Synthesis and application of dual functionalized task specific ionic liquid for bamboo dissolution. MATEC Web of Conferences, 111 .

Suman, S. and Hussin, F.A. and Malik, A.S. and Ho, S.H. and Hilmi, I. and Leow, A.H.-R. and Goh, K.-L. (2017) Feature selection and classification of ulcerated lesions using statistical analysis for WCE images. Applied Sciences (Switzerland), 7 (10).

Suman, S. and Hussin, F.A. and Walter, N. and Malik, A.S. and Hilmi, I. (2017) Automatic detection and removal of bubble frames from wireless capsule endoscopy video sequences. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Suman, S. and Hussin, F.A.B. and Malik, A.S. and Pogorelov, K. and Riegler, M. and Ho, S.H. and Hilmi, I. and Goh, K.L. (2017) Detection and classification of bleeding region in WCE images using color feature. ACM International Conference Proceeding Series, Part F .

Suman, S. and Hussin, F.A.B. and Walter, N. and Malik, A.S. and Ho, S.H. and Goh, K.L. (2017) Detection and classification of bleeding using statistical color features for wireless capsule endoscopy images. 2016 International Conference on Signal and Information Processing, IConSIP 2016 .

Sundararajan, V. and Selvaraj, G. and Ng, H.M. and Ramesh, S. and Ramesh, K. and Wilfred, C.D. and Bashir, S. (2017) Exploring the effect of novel N-butyl-6-methylquinolinium bis(trifluoromethylsulfonyl)imide ionic liquid addition to poly(methyl methacrylate-co-methacrylic) acid electrolyte system as employed in gel-state dye sensitized solar cells. Electrochimica Acta, 240 . pp. 361-370.

Supramaniam, T. and Ibrahim, R. and Chung, T.D. and Hassan, S.M. (2017) Towards the development of WirelessHART adaptor for process control applications. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Surendiran, S. and Thangavel, S. and Kannan, R. (2017) Optimization of PID controller parameters in interconnected power system using index curve based technique. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Syaza Zuhaira Shamsuddin, Maman Hermana, DP Ghosh, Ahmed Mohamed, . (2017) Feasibility Study of Various Litho-Fluid Indicators for Better Hydrocarbon Prediction in Malay and Adjacent Basin. Feasibility Study of Various Litho-Fluid Indicators for Better Hydrocarbon Prediction in Malay and Adjacent Basin .

T

T., Murugesan (2017) Chlorate adsorption from chlor-alkali plant brine stream. Chlorate adsorption from chlor-alkali plant brine stream .

T., Murugesan (2017) Determination of design parameters for the cloud point extraction of Remazol Turquoise Blue G-133 dye using Triton X-114 surfactant. DESALINATION AND WATER TREATMENT .

T., Murugesan (2017) Experimental investigation on the effect of wastewater matrix on oxytetracycline mineralization using UV/H2O2 system. Experimental investigation on the effect of wastewater matrix on oxytetracycline mineralization using UV/H2O2 system .

T.J., Low (2017) Bio-Inspired Energy Scavenging in Wireless Ad Hoc Network. 2017 INTERNATIONAL CONFERENCE ON INNOVATIONS IN ELECTRICAL ENGINEERING AND COMPUTATIONAL TECHNOLOGIES (ICIEECT) .

T.J., Low (2017) Macroalgae Recognition Based on Histogram Oriented Gradient. 9TH INTERNATIONAL CONFERENCE ON ROBOTIC, VISION, SIGNAL PROCESSING AND POWER APPLICATIONS: EMPOWERING RESEARCH AND INNOVATION .

Tageldeen, M.K. and Elamvazuthi, I. and Perumal, N. and Ganesan, T. and Borboni, A. (2017) Development of a 3D virtual platform for an upper arm robotic exoskeleton. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Tageldeen, M.K. and Perumal, N. and Elamvazuthi, I. and Ganesan, T. (2017) Design and control of an upper arm exoskeleton using Fuzzy logic techniques. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Taghizadeh, S.K. and Rahman, S.A. and Halim, H.A. and Ahmad, N.H. (2017) Dwelling into Service Innovation Management Practices: A Comparison Between Telecommunication Industry in Malaysia and Bangladesh. Global Business Review, 18 (1). pp. 87-98.

Tahan, M. and Muhammad, M. and Abdul Karim, Z.A. (2017) Performance evaluation of a twin-shaft gas turbine engine in mechanical drive service. Journal of Mechanical Science and Technology, 31 (2). pp. 937-948.

Tahan, M. and Muhammad, M. and Abdul Karim, Z.A. (2017) A multi-nets ANN model for real-time performance-based automatic fault diagnosis of industrial gas turbine engines. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (7). pp. 2865-2876.

Tahir, S. and Bakhsh, S.T. and Altalhi, A.H. (2017) An Efficient Route Maintenance Protocol for Dynamic Bluetooth Networks. Journal of King Saud University - Computer and Information Sciences, 29 (4). pp. 449-461.

Taj, and Prasad Nidumolu, E.C. and Geeta Krishna, P. and Prashanth Kumar, B. (2017) Finite element modeling and analysis of hip joint prosthesis with modular stem. International Journal of Mechanical Engineering and Technology, 8 (6). pp. 789-795.

Tan, C.S. and Lau, P.Y. and Low, T.J. (2017) Macroalgae recognition based on histogram oriented gradient. Lecture Notes in Electrical Engineering, 398 . pp. 257-266.

Tan, P.H. and Mohd Yassin, A.Y. (2017) Mixed Finite Element Formulation for Magnetic Fluid Oil Flow in Electromagnetic Field. MATEC Web of Conferences, 111 .

Taqvi, S.A. and Tufa, L.D. and Zabiri, H. and Mahadzir, S. and Shah Maulud, A. and Uddin, F. (2017) Artificial neural network for anomalies detection in distillation column. Communications in Computer and Information Science, 751 . pp. 302-311.

Tarmizi, W.F. and Elamvazuthi, I. and Perumal, N. and Nurhanim, K. and Khan, M.K.A.A. and Parasuraman, S. and Nandedkar, A.V. (2017) A Particle Swarm Optimization-PID controller of a DC Servomotor for Multi-Fingered Robot Hand. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016 .

Tasfy, S. and Mohd Zabidi, N.A. and Shaharun, M.S. and Subbarao, D. (2017) Methanol production via CO2 hydrogenation reaction: Effect of catalyst support. International Journal of Nanotechnology, 14 (1-6). pp. 410-421.

Tasfy, S.F.H. and Zabidi, N.A.M. and Shaharun, M.S. and Subbarao, D. and Elbagir, A. (2017) Carbon dioxide hydrogenation to methanol over Cu/ZnO-SBA-15 catalyst: Effect of metal loading. Defect and Diffusion Forum, 380 . pp. 151-160.

Tay, W.H. and Barashaid, A.A.B. and Lau, K.K. and Shariff, A.M. (2017) Effect of solution height on carbon dioxide absorption using high frequency ultrasonic irradiation. Chemical Engineering Transactions, 56 . pp. 1225-1230.

Tay, W.H. and Lau, K.K. and Shariff, A.M. (2017) High frequency ultrasonic-assisted chemical absorption of CO2 using monoethanolamine (MEA). Separation and Purification Technology, 183 . pp. 136-144.

Tay, W.H. and Lau, K.K. and Shariff, A.M. (2017) High performance promoter-free CO2 absorption using potassium carbonate solution in an ultrasonic irradiation system. Journal of CO2 Utilization, 21 . pp. 383-394.

Teo, W. and Hing, K.L.M. and Liew, M.S. (2017) Interaction between internal shear reinforcement and external FRP systems of RC beams: Experimental study. Open Civil Engineering Journal, 11 . pp. 143-152.

Teoh, C.S. and Mahmood, A.K. (2017) National cyber security strategies for digital economy. International Conference on Research and Innovation in Information Systems, ICRIIS .

Theng, S.G. and Jumbri, K.B. and Wirzal, M.D.H. (2017) Molecular dynamics simulation of membrane in room temperature ionic liquids. AIP Conference Proceedings, 1891 .

Thiruchelvam, L. and Asirvadam, V.S. and Dass, S.C. and Daud, H. and Gill, B.S. (2017) Dengue incidence prediction using model variables with registered case feedback. Lecture Notes in Electrical Engineering, 398 . pp. 163-172.

Tijani, M.M. and Aqsha, A. and Mahinpey, N. (2017) Synthesis and study of metal-based oxygen carriers (Cu, Co, Fe, Ni) and their interaction with supported metal oxides (Al2O3, CeO2, TiO2, ZrO2) in a chemical looping combustion system. Energy, 138 . pp. 873-882.

Ting, D.H. and Cheng, C.F.C. (2017) Developing pro-environmental behaviour: ecotourism fieldtrip and experiences. International Journal of Sustainability in Higher Education, 18 (7). pp. 1212-1229.

Ting, H. and Mering, M.W. and Adruce, S.A.Z. and Memon, M.A. (2017) Intention to attend the Rainforest World Music Festival: Local visitor perspectives. Tourism, Culture and Communication, 17 (2). pp. 119-129.

Togunwa, O.S. and Abdullah, W.H. (2017) Geochemical characterization of Neogene sediments from onshore West Baram Delta Province, Sarawak: Paleoenvironment, source input and thermal maturity. Open Geosciences, 9 (1). pp. 302-313.

Toledo Hijo, A.A.C. and Maximo, G.J. and Costa, M.C. and Cunha, R.L. and Pereira, J.F.B. and Kurnia, K.A. and Batista, E.A.C. and Meirelles, A.J.A. (2017) Phase Behavior and Physical Properties of New Biobased Ionic Liquid Crystals. Journal of Physical Chemistry B, 121 (14). pp. 3177-3189.

Tomi, A. and Rambli, D.R.A. (2017) A conceptual design of spatial calibration for optical see-through head mounted display using electroencephalographic signal processing on eye tracking. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10645 . pp. 331-339.

Trinh, H. and Yusup, S. and Uemura, Y. (2017) Optimization on pretreatment of rubber seed oil using microwave-assisted technique. Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 96 (8). pp. 314-318.

Trinh, T.H. and Han, F.Y. and Uemura, Y. and Nguyen, T.T. (2017) Viscosity of vegetable oils in methyl ethyl ketone and tetrahydrofuran. Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 96 (8). pp. 307-309.

Tsegab, H. and Sum, C.W. and Yuriy, G.A. and Hunter, A.W. and Talib, J.A.B. and Kassa, S. (2017) Higher-resolution biostratigraphy for the kinta limestone and an implication for continuous sedimentation in the paleo-tethys, western belt of peninsular Malaysia. Turkish Journal of Earth Sciences, 26 (5). pp. 377-394.

Tyng, C.M. and Amin, H.U. and Malik, A.S. and Saad, M.N.M. (2017) EEG spectral analysis and functional connectivity during learning of science concepts. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Tyng, C.M. and Amin, H.U. and Saad, M.N.M. and Malik, A.S. and Kang, K. (2017) EEG coherence and source localization analysis during multimedia learning process. IECBES 2016 - IEEE-EMBS Conference on Biomedical Engineering and Sciences . pp. 5-8.

U

Uemura, Y. and Sellappah, V. and Trinh, T.H. and Hassan, S. and Tanoue, K.-I. (2017) Torrefaction of empty fruit bunches under biomass combustion gas atmosphere. Bioresource Technology, 243 . pp. 107-117.

Uemura, Y. and Tran, N.T.T. and Naqvi, S.R. and Nishiyama, N. (2017) Nano-catalysts for upgrading bio-oil: Catalytic decarboxylation and hydrodeoxygenation. AIP Conference Proceedings, 1877 .

Ul Haq Gilani, S.F. and Ibrahim, R. and Khir, M.H.M. (2017) A case study for industrial centrifugal pump as a vibration source for macro-scale electromagnetic energy harvesting. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Ullah, H. and Wilfred, C.D. and Shaharun, M.S. (2017) Ionic liquid based ultrasonication-assisted extraction of essential oil from the leaves of Persicaria minor and conductor-like screening model for realistic solvents study. Chinese Journal of Chromatography (Se Pu), 35 (6). pp. 656-664.

Ullah, H. and Wilfred, C.D. and Shaharun, M.S. (2017) Synthesis of Silver Nanoparticles Using Ionic-Liquid-Based Microwave-Assisted Extraction from Polygonum minus and Photodegradation of Methylene Blue. Journal of the Chinese Chemical Society, 64 (10). pp. 1164-1171.

Ullah, R. and Md Said, A.B. and Jaafar, J. and Saleem, M.Q. (2017) Semantic Space Expansion and Refinement. ICOS 2016 - 2016 IEEE Conference on Open Systems . pp. 93-98.

Ullah, S. and Ahmad, F. and Shariff, A.M. and Bustam, M.A. and Gonfa, G. and Gillani, Q.F. (2017) Effects of ammonium polyphosphate and boric acid on the thermal degradation of an intumescent fire retardant coating. Progress in Organic Coatings, 109 . pp. 70-82.

Ullah, S. and Ahmad, F. and Shariff, A.M. and Raza, M.R. and Masset, P.J. (2017) The role of multi-wall carbon nanotubes in char strength of epoxy based intumescent fire retardant coating. Journal of Analytical and Applied Pyrolysis, 124 . pp. 149-160.

Ullah, S. and Bustam, M.A. and Shariff, A.M. and Gonfa, G. and Ayoub, M. and Raihan, M. (2017) Experimental study of corrosion on A36 mild steel towards aqueous 2-Amino-2-Ethyl-1, 3-Propanediol and diethanolamine. International Journal of Electrochemical Science, 12 (2). pp. 1642-1656.

Ullah, S. and Daud, H. and Dass, S.C. and Khan, H.N. and Khalil, A. (2017) Detecting space-time disease clusters with arbitrary shapes and sizes using a co-clustering approach. Geospatial Health, 12 (2). pp. 210-216.

Ullah, Z. and Bustam, M.A. and Man, Z. and Khan, A.S. and Muhammad, N. and Sarwono, A. (2017) Preparation and kinetics study of biodiesel production from waste cooking oil using new functionalized ionic liquids as catalysts. Renewable Energy, 114 . pp. 755-765.

Umar, A.A. and Negash, B.M. and Saaid, I.M. and Sulaimon, A.A. and Pilus, R.M. and Shahpin, H.B.A. and Mohamed, A.S. (2017) Effects of selected process variables on the stability of petroleum emulsions co-stabilized by carbon black and surfactant. Society of Petroleum Engineers - SPE Symposium: Production Enhancement and Cost Optimisation 2017 .

Umar, M.W. and Yahaya, N.B. and Baharuddin, Z.B. (2017) Design and simulation of DC-DC converter for automobile LED front lighting applications. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Usama, M. and Zakaria, N. (2017) Chaos-based simultaneous compression and encryption for Hadoop. PLoS ONE, 12 (1).

Utomo, C. and Rahmawati, Y. and Pararta, D.L. and Ariesta, A. (2017) Collaborative decision model on stockpile material of a traditional market infrastructure using value-based HBU. IOP Conference Series: Materials Science and Engineering, 267 (1).

ul Islam, B. and Baharudin, Z. (2017) A meta-heuristics based input variable selection technique for hybrid electrical energy demand prediction models. International Journal of Simulation: Systems, Science and Technology, 17 (41). 4.1-4.5.

V

Vakili, M. and Rafatullah, M. and Ibrahim, M.H. and Abdullah, A.Z. and Gholami, Z. and Salamatinia, B. (2017) Enhancing reactive blue 4 adsorption through chemical modification of chitosan with hexadecylamine and 3-aminopropyl triethoxysilane. Journal of Water Process Engineering, 15 . pp. 49-54.

Vandrangi, S.K. and Hassan, S.B. and Sharma, K.V. and Reddy, P. (2017) Comparison of nanofluid heat transfer properties with theory using generalized property relations for EG-water mixture. MATEC Web of Conferences, 131 .

Vantuch, T. and Zelinka, I. and Vasant, P. (2017) Market prices trend forecasting supported by Elliott Wave's theory. COMPSE 2016 - 1st EAI International Conference on Computer Science and Engineering .

Vasant, P. and Kose, U. and Watada, J. (2017) Metaheuristic techniques in enhancing the efficiency and performance of thermo-electric cooling devices. Energies, 10 (11).

Vijayan, B.L. and Krishnan, S.G. and Zain, N.K.M. and Harilal, M. and Yar, A. and Misnon, I.I. and Dennis, J.O. and Yusoff, M.M. and Jose, R. (2017) Large scale synthesis of binary composite nanowires in the Mn2O3-SnO2 system with improved charge storage capabilities. Chemical Engineering Journal, 327 . pp. 962-972.

W

Wagan, A.A. and Jung, L.T. (2017) Distributed dynamic mobility management scheme for network mobility. COMPSE 2016 - 1st EAI International Conference on Computer Science and Engineering .

Wahhab, H.A.A. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. and Afolabi, L.O. (2017) Prediction of the phase distribution of diesel/CNG bubbly flow in a horizontal pipe under the influence of a magnetic field. Journal of Mechanical Science and Technology, 31 (11). pp. 5299-5309.

Wan Yusof, K. and Mujahid Muhammad, M. and Raza Ul Mustafa, M. and Azazi Zakaria, N. and Gahani, A.A. (2017) Analysis of Manning's and Drag Coefficients for Flexible Submerged Vegetation. IOP Conference Series: Materials Science and Engineering, 216 (1).

Wan Yusof, Khamaruzaman and Malakahmad, Dr, Amirhossein, Dr and Abd.N., Matori (2017) Analytic network process (ANP)-based spatial decision support system (SDSS) for sustainable tourism planning in Cameron Highlands, Malaysia. Analytic network process (ANP)-based spatial decision support system (SDSS) for sustainable tourism planning in Cameron Highlands, Malaysia .

Wen, S.J. and Rabat, N.E. and Osman, N. (2017) Synthesis and characterization of oil palm empty fruit bunch- grafted -polyvinyl alcohol (OPEFB-g-PVA) hydrogel for removal of copper ions from aqueous solution. AIP Conference Proceedings, 1901 .

Wilfred, Cecilia (2017) Exploring the effect of novel N-butyl-6-methylquinolinium bis (trifluoromethylsulfonyl)imide ionic liquid addition to poly(methyl methacrylate-co-methacrylic) acid electrolyte system as employed in gel-state dye sensitized solar cells. Exploring the effect of novel N-butyl-6-methylquinolinium bis (trifluoromethylsulfonyl)imide ionic liquid addition to poly(methyl methacrylate-co-methacrylic) acid electrolyte system as employed in gel-state dye sensitized solar cells .

Wilfred, Cecilia (2017) Synthesis, thermophysical properties and COSMO-RS study of DBU based protic ionic liquids. JOURNAL OF CHEMICAL THERMODYNAMICS .

Witjaksono, G. and Hussin, N.H.F.B.M. and Rabih, A.A.S. and Alfa, S. (2017) Real time chromametry measurement for food quality detection using mobile device. IOP Conference Series: Materials Science and Engineering, 237 (1).

Witjaksono, G. and Saputra, I. and Latief, M. and Jaswir, I. and Akmeliawati, R. and Abdelkreem Saeed Rabih, A. (2017) Non-Halal biomarkers identification based on Fourier Transform Infrared Spectroscopy (FTIR) and Gas Chromatography-Time of Flight Mass Spectroscopy (GC-TOF MS) techniques. EPJ Web of Conferences, 162 .

Y

Yaakob, A.B. and Sulaimon, A.A. (2017) Performance assessment of plant extracts as green demulsifiers. Journal of the Japan Petroleum Institute, 60 (4). pp. 186-193.

Yahaya Khan, M. and Abdul Karim, Z.A. and Aziz, A.R.A. and Heikal, M.R. and Crua, C. (2017) Puffing and microexplosion behavior of water in pure diesel emulsion droplets during leidenfrost effect. Combustion Science and Technology, 189 (7). pp. 1186-1197.

Yahya, A.A. and Ali, N. and Mohd Kamal, N.L. and Shahidan, S. and Beddu, S. and Nuruddin, M.F. and Shafiq, N. (2017) Reducing Heavy Metal Element from Coal Bottom Ash by Using Citric Acid Leaching Treatment. MATEC Web of Conferences, 103 .

Yahya, N. and Alqasem, B. and Irfan, M. and Qureshi, S. and Rehman, Z.U. and Shafie, A. and Soleimani, H. (2017) The effect of saturation magnetization of nanocatalyst and oscillating magnetic field for green urea synthesis. Physica B: Condensed Matter, 507 . p. 1.

Yahya, N. and Qureshi, S. and Rehman, Z.U. and Alqasem, B. and Fai Kait, C. (2017) Green urea synthesis catalyzed by hematite nanowires in magnetic field. Journal of Magnetism and Magnetic Materials, 428 . pp. 469-480.

Yahya, N.H.B. and Yeong, Y.F. and Lai, L.S. (2017) Synthesis of Amino-Impregnated ZIF-8 for CO2 Adsorption. IOP Conference Series: Materials Science and Engineering, 226 (1).

Yahya, W.Z.N. and Meng, W.T. and Khatani, M. and Samsudin, A.E. and Mohamed, N.M. (2017) Bio-based chitosan/PVdF-HFP polymer-blend for quasi-solid state electrolyte dye-sensitized solar cells. E-Polymers, 17 (5). pp. 355-361.

Yap, K.H. and Ung, W.C. and Ebenezer, E.G.M. and Nordin, N. and Chin, P.S. and Sugathan, S. and Chan, S.C. and Yip, H.L. and Kiguchi, M. and Tang, T.B. (2017) Visualizing hyperactivation in neurodegeneration based on prefrontal oxygenation: A comparative study of mild Alzheimer's disease, mild cognitive impairment, and healthy controls. Frontiers in Aging Neuroscience, 9 (SEP).

Yaqub, A. and Isa, M.H. and Ajab, H. and Junaid, M. (2017) Electrochemical degradation of petroleum hydrocarbons (PAHS) from synthetic aqueous solutions. Petroleum Chemistry, 57 (5). pp. 457-465.

Yaqub, A. and Isa, M.H. and Ajab, H. and Junaid, M. (2017) Preparation of Ti/TiO2 anode for electrochemical oxidation of toxic priority pollutants. Journal of New Materials for Electrochemical Systems, 20 (1). pp. 7-12.

Yaqub, A. and Isa, M.H. and Ajab, H. and Kutty, S.R. and Ezechi, E.H. (2017) Polycyclic aromatic hydrocarbons removal from produced water by electrochemical process optimization. Ecological Chemistry and Engineering S, 24 (3). pp. 397-404.

Yaro, A.S. and Sha’Ameri, A.Z. and Kamel, N. (2017) Ground receiving station reference pair selection technique for a minimum configuration 3D emitter position estimation multilateration system. Advances in Electrical and Electronic Engineering, 15 (3). pp. 391-399.

Yasir, M. and Amir, N.B. and Ahmad, F. and Rodzhan, N.S. (2017) Effect of basalt fibres reinforcement and aluminum trihydrate on the thermal properties of intumescent fire retardant coatings. IOP Conference Series: Materials Science and Engineering, 226 (1).

Yau, X.H. and Khe, C.S. and Liu, W.W. and Lai, C.W. and Oo, Z. (2017) Synthesis and application of surfactants coated magnetite nanoparticles for demulsification of crude oil in water emulsion. AIP Conference Proceedings, 1892 .

Yau, X.H. and Yew, K.Y. and Khe, C.S. and Rajalingam, S. and Lai, C.W. and Liu, W.W. (2017) Facile one pot synthesis of highly stable L-ascorbic acid coated magnetite nanoparticles dispersion. Digest Journal of Nanomaterials and Biostructures, 12 (2). pp. 401-413.

Yavari, S. and Malakahmad, A. and Sapari, N.B. and Yavari, S. (2017) Sorption properties optimization of agricultural wastes-derived biochars using response surface methodology. Process Safety and Environmental Protection, 109 . pp. 509-519.

Yavari, S. and Malakahmad, A. and Sapari, N.B. and Yavari, S. (2017) Synthesis optimization of oil palm empty fruit bunch and rice husk biochars for removal of imazapic and imazapyr herbicides. Journal of Environmental Management, 193 . pp. 201-210.

Yavari, S. and Malakahmad, A. and Sapari, N.B. and Yavari, S. (2017) Treatment of urea manufacturing facility effluent by Hopea odorata and Khaya ivorensis. Water Science and Technology, 75 (7). pp. 1684-1692.

Yavari, S. and Malakahmad, A. and Sapari, N.B. and Yavari, S. and Khan, E. (2017) Nutrient balancing for phytoremediation enhancement of urea manufacturing raw wastewater. Journal of Environmental Management, 202 . pp. 225-231.

Yiin, C.L. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2017) Choline chloride (ChCl) and monosodium glutamate (MSG)-based green solvents from optimized cactus malic acid for biomass delignification. Bioresource Technology, 244 . pp. 941-948.

Yim, S.C. and Quitain, A.T. and Yusup, S. and Sasaki, M. and Uemura, Y. and Kida, T. (2017) Metal oxide-catalyzed hydrothermal liquefaction of Malaysian oil palm biomass to bio-oil under supercritical condition. Journal of Supercritical Fluids, 120 . pp. 384-394.

Yin, H. and Shirai, K. and Teo, W. (2017) Numerical Assessment of Ultra-high Performance Concrete Material. IOP Conference Series: Materials Science and Engineering, 241 (1).

Yin, Y.C. and Kait, C.F. and Fatimah, H. and Wilfred, C. and Taha, M.F.B. and Yunus, N.B.M. (2017) Preparation and characterization of Mg/TiO2 for visible light photooxidative-extractive deep desulfurization. Sains Malaysiana, 46 (3). pp. 493-501.

Yong, P.K. and Ho, E.T.W. (2017) Streaming brain and physiological signal acquisition system for IoT neuroscience application. IECBES 2016 - IEEE-EMBS Conference on Biomedical Engineering and Sciences . pp. 752-757.

Yousuff, C.M. and Hamid, N.H.B. and Hussain, K.I. and Ho, E.T.W. (2017) Numerical modelling and simulation of dielectrophoretic based WBC sorting using sidewall electrodes. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Yu, S.Y. and Choi, H.S. and Park, K.S. and Kim, Y.T. and Kim, D.K. (2017) Advanced procedure for estimation of pipeline embedment on soft clay seabed. Structural Engineering and Mechanics, 62 (4). pp. 381-389.

Yueze, L. and Akhtar, S. and Sasmito, A.P. and Kurnia, J.C. (2017) Prediction of air flow, methane, and coal dust dispersion in a room and pillar mining face. International Journal of Mining Science and Technology, 27 (4). pp. 657-662.

Yusof, K.W. and Babangida, N.M. and Mustafa, M.R. and Isa, M.H. (2017) Linear kernel support vector machines for modeling pore-water pressure responses. Journal of Engineering Science and Technology, 12 (8). pp. 2202-2212.

Yusuf, N.R. and Kamil, R.N.M. and Yusup, S. (2017) Physicochemical properties and structural characterisation of fatty acids derived from Jatropha curcas oil using microwave assisted alkaline hydrolysis. Journal of Physical Science, 28 . pp. 269-279.

Yusup, Suzana (2017) Co-pyrolysis of Rice Husk with Underutilized Biomass Species: A Sustainable Route for Production of Precursors for Fuels and Valuable Chemicals. Co-pyrolysis of Rice Husk with Underutilized Biomass Species: A Sustainable Route for Production of Precursors for Fuels and Valuable Chemicals .

Yusup, Suzana (2017) Effects of Pretreatments of Napier Grass with Deionized Water, Sulfuric Acid and Sodium Hydroxide on Pyrolysis Oil Characteristics. Effects of Pretreatments of Napier Grass with Deionized Water, Sulfuric Acid and Sodium Hydroxide on Pyrolysis Oil Characteristics .

Yusup, Suzana (2017) Upgrading of Napier grass pyrolytic oil using microporous and hierarchical mesoporous zeolites: Products distribution, composition and reaction pathways. Upgrading of Napier grass pyrolytic oil using microporous and hierarchical mesoporous zeolites: Products distribution, composition and reaction pathways .

Yusup, Suzana (2017) Valorization of Napier grass via intermediate pyrolysis: Optimization using response surface methodology and pyrolysis products characterization. Journal of Cleaner Production .

Yusup, Suzana and Sonny Irawan, Sonny (2017) Thermophysical properties of graphene nanosheets - Hydrogenated oil based nanofluid for drilling fluid improvements. Thermophysical properties of graphene nanosheets - Hydrogenated oil based nanofluid for drilling fluid improvements .

Yusup, Suzana and Sulaiman, Shaharin Anwar (2017) Fluidization of palm kernel shell, palm oil fronds, and empty fruit bunches in a swirling fluidized bed gasifier. PARTICULATE SCIENCE AND TECHNOLOGY .

Yusup, Suzana and Uemura, Yoshimitsu (2017) Catalytic consequences of micropore topology on biomass pyrolysis vapors over shape selective zeolites. 8TH INTERNATIONAL CONFERENCE ON APPLIED ENERGY (ICAE2016) .

Yusup, Suzana and Uemura, Yoshimitsu (2017) Choline chloride (ChCl) and monosodium glutamate (MSG)-based green solvents from optimized cactus malic acid for biomass delignification. Choline chloride (ChCl) and monosodium glutamate (MSG)-based green solvents from optimized cactus malic acid for biomass delignification .

Yusup, Suzana and Uemura, Yoshimitsu (2017) Process simulation and techno economic analysis of renewable diesel production via catalytic decarboxylation of rubber seed oil - A case study in Malaysia. Process simulation and techno economic analysis of renewable diesel production via catalytic decarboxylation of rubber seed oil - A case study in Malaysia .

Yusup, Suzana (2017) A review on recent technological advancement in the activated carbon production from oil palm wastes. A review on recent technological advancement in the activated carbon production from oil palm wastes .

Z

Zabidi, N. A. M. (2017) Effect of the support on physicochemical properties and catalytic performance of cobalt based nano-catalysts in Fischer-Tropsch reaction. . .

Zabidi, N. A. M. and Shaharun, Maizatul Shima (2017) Methanol production via CO2 hydrogenation reaction: effect of catalyst support. INTERNATIONAL JOURNAL OF NANOTECHNOLOGY .

Zafar, A. and Awang, M. and Khan, S.R. (2017) Friction stir welding of polymers: An overview. Lecture Notes in Mechanical Engineering . pp. 19-36.

Zafar, F. and Mandal, P.C. and Shaari, K.Z.B.K. and Nadeem, S. (2017) Total acid number reduction kinetics of naphthenic acids using non-catalytic subcritical methanol. AIP Conference Proceedings, 1891 .

Zafar, F. and Mandal, P.C. and Shaari, K.Z.B.K. and Ullah, Z. (2017) Coupling of subcritical methanol with acidic ionic liquids for the acidity reduction of naphthenic acids. Polish Journal of Chemical Technology, 19 (3). pp. 68-74.

Zafar, R. and Dass, S.C. and Malik, A.S. (2017) Electroencephalogram-based decoding cognitive states using convolutional neural network and likelihood ratio based score fusion. PLoS ONE, 12 (5).

Zafar, R. and Dass, S.C. and Malik, A.S. and Kamel, N. and Rehman, M.J.U. and Ahmad, R.F. and Abdullah, J.M. and Reza, F. (2017) Prediction of Human Brain Activity Using Likelihood Ratio Based Score Fusion. IEEE Access, 5 . pp. 13010-13019.

Zafar, R. and Kamel, N. and Naufal, M. and Malik, A.S. and Dass, S.C. and Ahmad, R.F. and Abdullah, J.M. and Reza, F. (2017) Decoding of visual activity patterns from fMRI responses using multivariate pattern analyses and convolutional neural network. Journal of Integrative Neuroscience, 16 (3). pp. 275-289.

Zahari, M.K. and Ahmad, B.H. and Wen, W.P. and Shairi, N.A. (2017) Switchable absorptive bandstop to bandpass filter using stepped-impedance dual mode resonator. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-13). pp. 17-21.

Zahari, M.K. and Ahmad, B.H. and Wen, W.P. and Shairi, N.A. and Mutalib, M.A. and Hassan, N. (2017) An investigation of switchable matched bandstop to bandpass filter based on lossy resonator. Journal of Telecommunication, Electronic and Computer Engineering, 9 (1-5). pp. 119-123.

Zahid, M. and Shafiq, N. and Nuruddin, M.F. and Nikbakht, E. and Jalal, A. (2017) Effect of partial replacement of fly ash by metakaolin on strength development of fly ash based geopolymer mortar. Key Engineering Materials, 744 . pp. 131-135.

Zahidah, K.A. and Kakooei, S. and Kermanioryani, M. and Mohebbi, H. and Ismail, M.C. and Raja, P.B. (2017) Benzimidazole-loaded halloysite nanotube as a smart coating application. International Journal of Engineering and Technology Innovation, 7 (4). pp. 243-254.

Zahraee, S.M. and Assadi, M.K. (2017) Applications and challenges of the palm biomass supply chain in Malaysia. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5789-5793.

Zahraee, S.M. and Khalaji Assadi, M. and Bayat, S. and Bakhoda, S. (2017) Energy efficient of the residential buildings based climatic condition using experimental design a case study in malaysia. MATEC Web of Conferences, 131 .

Zaid, H.M. and Adil, M. and Lee, K.C. (2017) Structural and morphological evolution of metal oxide nanoparticles synthesised via sol-gel auto-combustion. International Journal of Nanotechnology, 14 (1-6). pp. 284-296.

Zaidi, K.S. and Jeoti, V. and Awang, A. and Drieberg, M. (2017) High reliability using virtual MIMO based mesh network for maritime wireless communication. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Zainab Habib, N. and Kamaruddin, I. and Tan, I.M. and Komiyama, M. (2017) Investigation on the effect of phase segregation on the mechanical properties of polymer modified bitumen using analytical and morphological tools. MATEC Web of Conferences, 120 .

Zainal Abidin, N.S. and Raymond, R.R. and Bashah, N.S.I. (2017) Diagenetic history of late Oligocene-early Miocene carbonates in East Sabah, Malaysia. IOP Conference Series: Earth and Environmental Science, 88 (1).

Zainol, M.Z. and Romlie, M.F. and Jalil, M.R.A. and Yahaya, N.Z. and Zainol, I. and Ghani, M.F. and Jasri, M.A.H.M. (2017) Design and analysis of a contactless battery charger with planar PCB windings. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Zainuddin, N. and Ibrahim, Z.B. (2017) Block method for third order ordinary differential equations. AIP Conference Proceedings, 1870 .

Zakaria, M.N. (2017) Stochastic partially optimized cyclic shift crossover for multi-objective genetic algorithms for the vehicle routing problem with time-windows. . .

Zakaria, Mohd Nordin (2017) Chaos-Based Simultaneous Compression and Encryption for Hadoop. PLOS ONE .

Zakaria, Z.A. and Hasan, K.N.M. and Razak, M.F.A. and Yaacob, A. and Othman, A.R. (2017) Experimental study on tensile strength of butt joints for mild steel with thickness 6mm using Gas Metal Arc Welding (GMAW). Key Engineering Materials, 740 KE . pp. 155-160.

Zakaria, Z.A. and Yaacob, A. and Mokri, K.N. and Hanaffi, M.S. and Zainol, M.Z. and Ganesan, L. and Ishak, M.F. and Majid, M.A. and Hasan, K.N.M. (2017) Development of cost effective Ultrasonic Testing thickness measurement specimens and basic laboratory guidelines for UniKL MIMET. ARPN Journal of Engineering and Applied Sciences, 12 (6). pp. 1961-1967.

Zakariya, M.A. and Ali, S.M. and Baharudin, Z. and Rehman, M.Z.U. and Abdullah, S.M.C. and Khan, A.M. and Khan, M.T. (2017) Investigation of DGS CDRA for high gain applications. Lecture Notes in Electrical Engineering, 398 . pp. 571-580.

Zakariya, M.A. and Baharudin, Zuhairi (2017) Investigation of DGS CDRA for High Gain Applications. 9TH INTERNATIONAL CONFERENCE ON ROBOTIC, VISION, SIGNAL PROCESSING AND POWER APPLICATIONS: EMPOWERING RESEARCH AND INNOVATION .

Zaman, N. and Ilyas, M. and Ahmad, M. and Mohammad, F. and Abdullah, A. (2017) An experimental research in health informatics for designing an enhanced intelligent could-based collaborative multi-modal framework for medical imaging diagnostics. Journal of Medical Imaging and Health Informatics, 7 (6). pp. 1358-1364.

Zamri, N.A.M. and Ibrahim, T. and Nor, N.M. (2017) Design and modelling of generator for wave energy conversion system in Malaysia. International Journal of Simulation: Systems, Science and Technology, 17 (41). 23.1-23.6.

Zamri, N.A.M. and Ibrahim, T. and Nor, N.M. (2017) Direct drive linear generator designs with aluminium spacer and alternate slot winding for wave energy conversion system. International Journal on Advanced Science, Engineering and Information Technology, 7 (4). pp. 1282-1288.

Zamri, N.A.M. and Ibrahim, T. and Nor, N.M. (2017) Optimization of linear generator designs for wave energy converter (WEC) system in Malaysia. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Zee, E. and Wong, P.W. (2017) Design and synthesis of dual-band microwave bandpass filter based on hybrid polynomials. Progress In Electromagnetics Research C, 72 . pp. 141-149.

Zelinka, I. and Vasant, P. and Dao, T.T. and Hoang, D.V. (2017) A novell approach on evolutionary dynamics analysis - A progress report. COMPSE 2016 - 1st EAI International Conference on Computer Science and Engineering .

Zia-ul-Mustafa, M. and Ahmad, F. and Ullah, S. and Amir, N. and Gillani, Q.F. (2017) Thermal and pyrolysis analysis of minerals reinforced intumescent fire retardant coating. Progress in Organic Coatings, 102 . pp. 201-216.

Zuki, F.S.M. and Sulaiman, S. (2017) Investigating sensory modalities in fatigue driver warning systems. Proceedings - 2016 4th International Conference on User Science and Engineering, i-USEr 2016 . pp. 128-132.

Zuki, F.S.M. and Sulaiman, S. (2017) Using multimodal warning as a method of optimizing an in-vehicle warning system. Proceedings - 2016 4th International Conference on User Science and Engineering, i-USEr 2016 . pp. 91-94.

Zulkafli, A.Z. and Basri, S. and Ahmad, R. and Imam, A.A. (2017) A framework for image synchronization from mobile NoSQL database to server-side SQL database. Advances in Intelligent Systems and Computing, 575 . pp. 179-191.

Zulkarnain, N.F. and Ibrahim, T. and Romlie, M.F. (2017) Analysis of radial and halbach permanent magnet configurations for ceiling fan applications. International Journal of Simulation: Systems, Science and Technology, 17 (41). 22.1-22.6.

Zulkarnain, N.F. and Ibrahim, T. and Romlie, M.F. (2017) Design and optimization of permanent magnet machine for ceiling fan. International Conference on Intelligent and Advanced Systems, ICIAS 2016 .

Zulkefli, N.A.B.M. and Rasli, R.B.M. and Baharudin, B.B. (2017) Trusted Data Travel Blogs Information Focusing on Followers. ICISS 2016 - 2016 International Conference on Information Science and Security .

This list was generated on Tue Jun 19 21:57:36 2018 MYT.