Items where Year is 2014

Article

Alashloo, Seyed Yaser Moussavi and Ghosh, Deva Prasad and Wan Yusoff, Wan Ismail (2014) VTI Wave Modeling Using Weak Elastic Anisotropy Approximation. INTEGRATED PETROLEUM ENGINEERING AND GEOSCIENCES.

Ayman N Qadrouh, José M Carcione, Marco AB Botelho, Zuhar Zahir, . (2014) On optimal NMO and generalised Dix equations for velocity determination and depth conversion. On optimal NMO and generalised Dix equations for velocity determination and depth conversion.

KHALAJI ASSADI, M (2014) THERMODYNAMIC ASSESSMENT OF A HYBRID SOFC/GT CYCLE CONSIDERING OXY-ANODE COMBUSTION CO2 CAPTURE TECHNOLOGY. Indian J.Sci.Res.3 (1): 148-172, 2014, 1 (3). pp. 148-172. ISSN ISSN : 0976-2876 (Print), ISSN : 2250-0138 (Online)

., Abdul Halim Abdul Latiff, Deva Prasad Ghosh, Zuhar Zahir Tuan Ha (2014) Seismic Illumination Analysis in Poor Oil & Gas Field Data by Using Focal Beam Method. Seismic Illumination Analysis in Poor Oil & Gas Field Data by Using Focal Beam Method.

., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, Puteri Sri Melor (2014) Effect of CNTs dispersion on the thermal and mechanical properties of Cu/CNTs nanocomposites. Effect of CNTs dispersion on the thermal and mechanical properties of Cu/CNTs nanocomposites.

., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, Puteri Sri Melor (2014) Experimental Preparation and Numerical Simulation of High Thermal Conductive Cu/CNTs Nanocomposites. Experimental Preparation and Numerical Simulation of High Thermal Conductive Cu/CNTs Nanocomposites.

., Ali Samer Muhsan, Faiz Ahmad, Norani M. Mohamed, Puteri Sri Melo (2014) Homogeneous Distribution of Carbon Nanotubes in Copper Matrix Nanocomposites Fabricated via Combined Technique. Homogeneous Distribution of Carbon Nanotubes in Copper Matrix Nanocomposites Fabricated via Combined Technique. (Submitted)

., Faiz Ahmad, Muhammad Aslam, M Rafi Raza, Ali S Muhsan (2014) Experimental Investigation on Thermal Conduction of Carbon Nanotubes Reinforced Copper Matrix Composites. Experimental Investigation on Thermal Conduction of Carbon Nanotubes Reinforced Copper Matrix Composites.

., Iman Eslami Afrooz, Puteri Sri Melor Binti Megat Yusoff, Faiz Ah (2014) A Numerical Analysis for Predicting the Thermal Conductivity of Carbon Nanotube Reinforced Copper-Matrix Nanocomposites. A Numerical Analysis for Predicting the Thermal Conductivity of Carbon Nanotube Reinforced Copper-Matrix Nanocomposites.

., M Irfan Shirazi, Faiz Ahmad, M Rafi Raza, Ali S Muhsan, MA Omer, (2014) Orientation of Carbon Fibers in Copper matrix Produced by Powder Injection Molding. Orientation of Carbon Fibers in Copper matrix Produced by Powder Injection Molding.

., M Waris, Mohd Shahir Liew, Mohd Faris Khamidi, Arazi Idrus (2014) Criteria for the selection of sustainable onsite construction equipment. Criteria for the selection of sustainable onsite construction equipment.

., VJ Kurian, AA Sebastian, AM Al-Yacouby, MS Liew, VG Idichandy (2014) Wave Forces on Linear Arrays of Rigid Vertical Circular Cylinders in Regular Waves. Wave Forces on Linear Arrays of Rigid Vertical Circular Cylinders in Regular Waves. (Submitted)

., VJ Kurian, MC Voon, MMA Wahab, MS Liew (2014) System Reliability Assessment of Existing Jacket Platforms in Malaysian Waters. System Reliability Assessment of Existing Jacket Platforms in Malaysian Waters. (Submitted)

., Z Nizamani, VJ Kurian, MS Liew (2014) Determination of environmental load factors for ISO 19902 code in offshore Malaysia using FORM structural reliability method. Determination of environmental load factors for ISO 19902 code in offshore Malaysia using FORM structural reliability method. (Submitted)

Ab Kadir, N.A. and Rusli, R. and Zaina Abidin, N.A. (2014) CFD study on syngas dispersion for biomass process industry. Applied Mechanics and Materials, 625. pp. 410-413.

Ab. Rahim, L.B. and Bhattacharjee, S. and Aziz, I.B.A. (2014) An audio steganography technique to maximize data hiding capacity along with least modification of host. Lecture Notes in Electrical Engineering, 285 LN. pp. 277-289.

Abbas, A.H. and Fadhil, M. and Aris, M.S. and Ibrahim, A.B.A. and Aniza, N. (2014) A non-isothermal thermo gravimetric kinetic analysis of malaysian poultry-processing-dewatered-sludge. Advanced Materials Research, 970. pp. 217-223.

Abbas, T. and Abdul Mutalib, M.I. and Azmi Bustam, M. (2014) Developments in mercury removal from natural Gas-A short review. Applied Mechanics and Materials, 625. pp. 223-228.

Abd Majid, Mohd Amin and Sulaiman, S. A. and Fujii, Tatsuo and Naono, Naono (2014) Studies on Steam Absorption Chillers Performance at a Cogeneration Plant. MATEC Web of Conference 13, 05003 (2014).

Abd. Rahman, A.H. and Menier, D. and Mansor, M.Y. (2014) Sequence stratigraphic modelling and reservoir architecture of the shallow marine successions of Baram field, West Baram Delta, offshore Sarawak, East Malaysia. Marine and Petroleum Geology, 58 (PB). pp. 687-703.

Abdalrahman, M.G. and Dennis, J.O. and Khir, M.H.M. (2014) Design and modeling of a CMOS MEMS gravimetric sensor. Applied Mechanics and Materials, 446-44. pp. 1073-1077.

Abdel-Aty, A.-H. and Zakaria, N. and Cheong, L.Y. and Metwally, N. (2014) Effect of the spin-orbit interaction on partial entangled quantum network. Lecture Notes in Electrical Engineering, 285 LN. pp. 529-537.

Abdul Ghani, M.R. and Ching Peiching, O.P. (2014) Optimization of ethanol production from mango peels using response surface methodology. Applied Mechanics and Materials, 625. pp. 766-769.

Abdul Karim, S.A. and Mohd Rosli, M.A. and Mohd Mustafa, M.I. (2014) Cubic spline interpolation for petroleum engineering data. Applied Mathematical Sciences, 8 (101-10). pp. 5083-5098.

Abdul Latiff, Abdul Halim and Ghosh, Deva Prasad and Tuan Harith, Zuhar Zahir (2014) An Integrated Method of Subsurface Illumination Analysis for Shallow Gas Anomaly Data. IPTC.

Abdul Latiff, Abdul Halim and Ghosh, Deva Prasad and Tuan Harith, Zuhar Zahir and Jamaludin, Siti Nur Fathiyah (2014) Seismic Illumination Analysis in Poor Quality Data Using Focal Beam Method: Full 3D vs. Conventional 3D Acquisition Design. Journal of Applied Sciences. ISSN 18125654

Abdul Mannan, H. and Mukhtar, H. and Murugesan, T. (2014) Polyethersulfone (PES) membranes for CO2/CH4 separation: Effect of polymer blending. Applied Mechanics and Materials, 625. pp. 172-175.

Abdul Rahim, R.H. and Azizli, K.A. and Man, Z. and Rahmiati, T. and Ismail, L. (2014) Effect of solid to liquid ratio on the mechanical and physical properties of fly ash geopolymer without sodium silicate. Applied Mechanics and Materials, 625. pp. 46-49.

Abdul Wahab, N. and Rusli, R. and Shariff, A.M. (2014) Evaluation of inherent safety strategies using FAHP to reduce human error. Advanced Materials Research, 917. pp. 332-341.

Abdul-Rani, A.M. and Ismail, M.Z. and Zaky, M.A. and Noor, M.H.M. and Zhun, Y.Y. and Ganesan, K. and Rao, T.V.V.L.N. and Kamal, S. and Ginta, T.L. (2014) Improving rate of penetration for PDC drill bit using reverse engineering. Applied Mechanics and Materials, 607. pp. 153-160.

Abdulkadir, S.J. and Yong, S.-P. and Marimuthu, M. and Lai, F.-W. (2014) Hybridization of ensemble kalman filter and non-linear auto-regressive neural network for financial forecasting. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8891. pp. 72-81.

Abdullah, B.B. and Vo, D.-V.N. and Chowdhury, S. (2014) Modeling the effect of temperature-induced surface tension gradient in coating processes. Advanced Materials Research, 917. pp. 181-188.

Abdullah, M.Z. and Sufian, S. and Abdul Hamid, F.H. (2014) Ph dependence on biosorption of PB (II) by p. Amaryllifolius roxb. Applied Mechanics and Materials, 625. pp. 757-760.

Abdullah, M.Z. and Yusup, S. and Mohd Bukhari, N.A. (2014) Synthesis and dehumidification performance of calcium chloride derived from the waste shells of Anadara granosa. Applied Mechanics and Materials, 625. pp. 924-927.

Abdullah, S.B. and Man, Z. and Ismail, L. and Mutalib, M.I.A. and Bustam, M.A. (2014) Solubility parameters based on refractive index data of ionic liquid. Advanced Materials Research, 917. pp. 45-55.

Abunowara, M. and Eldemerdash, U. and Awang, M. and Mady, H. (2014) Evaluation of carbon dioxide adsorption on Malaysian coals for potential sequestration. Applied Mechanics and Materials, 625. pp. 184-187.

Adil, S.H. and Ali, S.S.A. and Raza, K. and Hussaan, A.M. (2014) An improved intrusion detection approach using synthetic minority over-sampling technique and deep belief network. Frontiers in Artificial Intelligence and Applications, 265. pp. 94-102.

Affam, A.C. and Chaudhuri, M. and Kutty, S.R.M. (2014) Optimization of modified fenton (FeGAC/ H2O2) pretreatment of antibiotics. Pertanika Journal of Science and Technology, 22 (1). pp. 239-254.

Afolabi, L.O. and Al-Kayiem, H.H. and Aklilu, T.B. (2014) Performance analysis of integrated collector system with immersed coil heat exchanger. Applied Mechanics and Materials, 660. pp. 740-744.

Afzaal, M. and Periyasamy, B. and Abdullah, M.A. (2014) Continuous heavy metal removal from palm oil mill effluent using natural ceiba pentandra packed-bed column. Applied Mechanics and Materials, 625. pp. 822-825.

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2014) Biomethane production and palm oil mill effluent treatment by co-cultivation of Nannochloropsis oculata. Applied Mechanics and Materials, 625. pp. 818-821.

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2014) Enhanced palm oil mill effluent treatment and biomethane production by co-digestion of oil palm empty fruit bunches with Chlorella Sp. Canadian Journal of Chemical Engineering, 92 (9). pp. 1636-1642.

Ahmad, J. and Yusup, S. and Bokhari, A. and Kamil, R.N.M. (2014) Biodiesel production from the high free fatty acid �hevea brasiliensis� and fuel properties characterization. Applied Mechanics and Materials, 625. pp. 897-900.

Ahmad, M.A.R. and Nasiruddin, Z.R. and Rao, T.V.V.L.N. and Altaf, K. (2014) Overcoming limitation in DFM using layer manufacturing. Applied Mechanics and Materials, 660. pp. 94-98.

Ahmad, M.F.A. and Mohd Hashim, F.M. (2014) The correlation between variations of pressure against temperature distribution in supersonic subsea compact Wet-Gas Separators. Advanced Materials Research, 1043. pp. 258-262.

Ahmad, R. and Saknakosnak, P. and Hooi, Y.K. (2014) Excel-database converting system using data normalization technique. Lecture Notes in Electrical Engineering, 285 LN. pp. 23-30.

Ahmed, I. (2014) Preface. Applied Mechanics and Materials, 625.

Ahmed, I. and Idris, A. and Khan, M.S. and Chowdhury, S. and Akhtar, J. (2014) Effect of acetone on physical properties of PES membrane. Applied Mechanics and Materials, 625. pp. 545-548.

Ahmed, R. and Sinnathambi, C.M. and Eldmerdash, U. (2014) Dynamic studies of refinery sludge gasification in updraft reactor. Applied Mechanics and Materials, 625. pp. 431-434.

Ahmed, S. and Ramli, A. and Yusup, S. (2014) Physicochemical properties of Diethanolamine-functionalized Si-MCM-41. Applied Mechanics and Materials, 625. pp. 11-14.

Ahyudanari, E. and Shafiq, N. and Kamaruddin, I. (2014) Identification and modelling process of defining temperature gradient in airport pavement. Aviation, 18 (2). pp. 72-79.

Aja, O.C. and Al-Kayiem, H.H. (2014) Review of municipal solid waste management options in Malaysia, with an emphasis on sustainable waste-to-energy options. Journal of Material Cycles and Waste Management, 16 (4). pp. 693-710.

Aja, O.C. and Oseghale, S.D. and Al-Kayiem, H.H. (2014) Review and evaluation of municipal solid waste management practices in Malaysia. Journal of Solid Waste Technology and Management, 40 (3). pp. 216-232.

Ajab, H. and Khan, A.A.A. and Dennis, J.O. and Abdullah, M.A. (2014) Bismuth-modified hydroxyapatite carbon electrode for heavy metal detection in biomatrices. Applied Mechanics and Materials, 625. pp. 813-817.

Ajab, H. and Yaqub, A. and Malik, S.A. and Junaid, M. and Yasmeen, S. and Abdullah, M.A. (2014) Characterization of toxic metals in tobacco, tobacco smoke, and cigarette ash from selected imported and local brands in Pakistan. The Scientific World Journal, 2014.

Akbar, A.R. and Awang, M. (2014) Performance prediction of inertial auto-reinforce magnetic flywheel energy storage device using finite element magnetic modeling. Applied Mechanics and Materials, 663. pp. 169-174.

Akbar, A.R. and Awang, M.B. and Sawitri, D. (2014) Energy balance assessment of magnetic materials as theoretical hint for formulation of interoperable magnetic-mechanical equation. Advanced Materials Research, 1024. pp. 376-380.

Akbarzadeh, O. and Mohd Zabidi, N.A. and Abdullah, B. and Subbarao, D. (2014) Synthesis and characterization of Co/CNTs catalysts prepared by strong electrostatic adsorption (SEA) method. Applied Mechanics and Materials, 625. pp. 328-332.

Akbarzadeh, O. and Zabidi, N.A.M. and Abdullah, B. and Subbarao, D. (2014) Synthesis of Co/CNTs via strong electrostatic adsorption: Effect of metal loading. Advanced Materials Research, 1043. pp. 101-104.

Akilu, S. and Narahari, M. (2014) Effects of heat generation or absorption on free convection flow of a nanofluid past an isothermal inclined plate. Advanced Materials Research, 970. pp. 267-271.

Al Kaisy, G.M.J. and Mutalib, M.I.A. and Bustam, M.A. and Razali, R.B. (2014) Optimization of naphthalene extraction from its mixture with base oil and dibenzothiophene by BMIMDMP ionic liquid using response surface methodology (RSM). Applied Mechanics and Materials, 625. pp. 50-56.

Al-Amin Endut, M.N. and Yaacob, R.A.I.R. and Abdur-Rahman, M.A. and Abdullah, W.S.W. and Bakar, Z.A. (2014) The perception of al-'Adl in critical thinking: A comparative study of Muslim engineering undergraduates in Malaysian universities. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 65-75.

Al-Azawie, S.S. and Hassan, S. and Zammeri, M.F. (2014) Experimental and numerical study on ground material absorptivity for solar chimney power applications. WIT Transactions on Ecology and the Environment, 186. pp. 219-230.

Al-Jemeli, M. and Hussin, F.A. (2014) On location estimation methods for mobile wireless sensor nodes. Research Journal of Applied Sciences, Engineering and Technology, 8 (1). pp. 124-130.

Al-Jemeli, Marwan and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2014) On Location Estimation Methods For Mobile Wireless Sensor Networks. Research Journal of Applied Sciences, Engineering and Technology, 8 (1). pp. 124-130. ISSN 2040-7467

Al-Kayiem, H.H. (2014) Visualization of flow field and wake over clean and under-loaded wings. Applied Mechanics and Materials, 629. pp. 24-29.

Al-Kayiem, H.H. and Hussein, A.K. and Jaleel, J.M. and Hussain, S.H. (2014) Numerical computation of 3-dimensional supersonic flow field over seamless missiles. Indian Journal of Science and Technology, 7 (10). pp. 1563-1572.

Al-Kayiem, H.H. and Lin, S.C. (2014) Performance evaluation of a solar water heater integrated with a PCM nanocomposite TES at various inclinations. Solar Energy, 109 (1). pp. 82-92.

Al-Kayiem, H.H. and Theeb, M.A.W. (2014) Sustaining thermal power plant production in low water supply regions using cooling towers. WIT Transactions on Ecology and the Environment, 186. pp. 679-690.

Al-Kayiem, Hussain H. and Lin, S.C. (2014) Performance evaluation of a solar water heater integrated with a PCM nanocomposite TES at various inclinations. Solar Energy, 109 (1). pp. 82-92. ISSN 1471-1257

Albarody, T.M.B. and Al-Kayiem, H.H. (2014) Dynamic analysis of laminated composite thermo-magneto-electro-elastic shells. Journal of Mechanical Science and Technology, 28 (12). pp. 4877-4891.

Albarody, T.M.B. and Mustaffa, Z.B. and Liew, M.S. (2014) Smart and robust composite tube columns frames for offshore sub-structure construction. Advanced Materials Research, 983. pp. 11-15.

Alhaj, H.M.M. and Nor, N.M. and Asirvadam, V.S. and Abdullah, M.F. (2014) Fundamental frequency estimation in power system through the utilization of sliding window-LMS method. Applied Mechanics and Materials, 446-44. pp. 764-771.

Alhussian, H. and Zakaria, N. and Hussin, F.A. and Bahbouh, H.T. (2014) A modified LRE-TL real-time multiprocessor scheduling algorithm. Lecture Notes in Electrical Engineering, 285 LN. pp. 335-344.

Ali, A. and Ashraf, A.M. and Shariff, A.B.M. and Ganguly, S. (2014) Study of simultaneous mass transfer and nucleation in cryogenic packed bed for the removal of CO2 from natural gas. Applied Mechanics and Materials, 625. pp. 229-232.

Ali, A. and Maqsood, K. and Syahera, N. and Shariff, A.B.M. and Ganguly, S. (2014) Energy minimization in cryogenic packed beds during purification of natural gas with high co2 content. Chemical Engineering and Technology, 37 (10). pp. 1675-1685.

Ali, A.M. and Padmanabhan, E. (2014) Quartz surface morphology of Tertiary rocks from North East Sarawak, Malaysia: Implications for paleo-depositional environment and reservoir rock quality predictions. Petroleum Exploration and Development, 41 (6). pp. 761-770.

Ali, A.M. and Padmanabhan, E. (2014) Quartz surface morphology of Tertiary rocks from North East Sarawak, Malaysia: Implications for paleo-depositional environment and reservoir rock quality predictions. Shiyou Kantan Yu Kaifa/Petroleum Exploration and Development, 41 (6). pp. 697-704.

Ali, Basil and Gilani, Syed Ihtsham-ul-Haq and Al-Kayiem, Hussain H. (2014) Investigation of evacuated tube collector performance at high temperature mode using TRNSYS simulation model. Applied Mechanics and Materials , 465. pp. 155-160.

Ali, H.E.A. and Shanab, S.M.M. and Abo-State, M.A.M. and Shalaby, E.A.A. and El Demerdash, U.M.N. and Abdullah, M.A. (2014) Determination of antioxidant activities and total phenolic contents of three cyanobacterial species. Applied Mechanics and Materials, 625. pp. 826-829.

Ali, H.E.A. and Shanab, S.M.M. and Abo-State, M.A.M. and Shalaby, E.A.A. and El Demerdash, U.M.N. and Abdullah, M.A. (2014) Evaluation of antioxidants, pigments and secondary metabolites contents in Spirulina platensis. Applied Mechanics and Materials, 625. pp. 160-163.

Ali, H.E.A. and Shanab, S.M.M. and Abo-State, M.A.M. and Shalaby, E.A.A. and El Demerdash, U.M.N. and Abdullah, M.A. (2014) Screening of microalgae for antioxidant activities, carotenoids and phenolic contents. Applied Mechanics and Materials, 625. pp. 156-159.

Ali, T. and Jung, L.T. and Faye, I. (2014) Classification of routing algorithms in volatile environment of underwater wireless sensor Networks. International Journal of Communication Networks and Information Security, 6 (2). pp. 129-147.

Ali, T. and Jung, L.T. and Faye, I. (2014) End-to-End Delay and Energy Efficient Routing Protocol for Underwater Wireless Sensor Networks. Wireless Personal Communications, 79 (1). pp. 339-361.

Ali, T. and Jung, L.T. and Faye, I. (2014) A reliable data flooding in underwater wireless sensor network. Lecture Notes in Electrical Engineering, 285 LN. pp. 499-511.

Alipour Moghadam, R. and Yusup, S. and Azlina, W. and Nehzati, S. and Tavasoli, A. (2014) Investigation on syngas production via biomass conversion through the integration of pyrolysis and air-steam gasification processes. Energy Conversion and Management, 87. pp. 670-675.

Aljuboori, A.H.R. and Uemura, Y. and Osman, N.B. and Yusup, S. (2014) Production of a bioflocculant from Aspergillus niger using palm oil mill effluent as carbon source. Bioresource Technology, 171. pp. 66-70.

Almahasneh, H. and Chooi, W.-T. and Kamel, N. and Malik, A.S. (2014) Deep in thought while driving: An EEG study on drivers' cognitive distraction. Transportation Research Part F: Traffic Psychology and Behaviour, 26 (PA). pp. 218-226.

Almustapha, S. and Ali Khan, A.A. and Omar, A.A. and Ariwahjoedi, B. and Abdullah, M.A. (2014) Cellulose-modified carbon electrode for in situ lead detection. Applied Mechanics and Materials, 625. pp. 136-139.

Alnarabiji, M.S. and Yahya, N. and Bee Abd Hamid, S. and Azizi, K. and Shafie, A. and Solemani, H. (2014) Microwave synthesis of ZnO nanoparticles for enhanced oil recovery. Advanced Materials Research, 1024. pp. 83-86.

Amir Khan, M. and Hasbullah, H. and Nazir, B. (2014) Providing optimal percentage reduction in coverage for mobile sensor networks. Life Science Journal, 11 (SPEC. ). pp. 136-142.

Amok, J.O.M. and Saad, N.M. (2014) Error probability performance analysis for multicarrier direct sequence code division multiple access multiple-input-multiple-output systems over correlated η-μ fading channels. IET Communications, 8 (17). pp. 2971-2983.

Arpit and Shafie, A. and Wan Ahmad, W.F. (2014) Automata for modeling the distributed probabilistic reversible processes. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8321. pp. 122-136.

Aruchunan, E. and Muthuvalu, M.S. and Sulaiman, J. and Koh, W.S. and Akhir, K.M. (2014) An iterative solution for second order linear Fredholm integro-differential equations. Malaysian Journal of Mathematical Sciences, 8 (2). pp. 157-170.

Asadpour, R. and Sapari, N.B. and Isa, M.H. and Orji, K.U. (2014) Enhancing the hydrophobicity of mangrove bark by esterification for oil adsorption. Water Science and Technology, 70 (7). pp. 1220-1228.

Asif, A. and Man, Z. and Azizli, K.A.M. and Nuruddin, M.F. and Ismail, L. (2014) Effect of NAOH concentration on the strength of non sodium silicate fly ash geopolymer. Applied Mechanics and Materials, 625. pp. 102-105.

Aslam, Muhammad Zubair and Tang, Tong Boon (2014) A high resolution capacitive sensing system for the measurement of water content in crude oil. Sensors, 14 (7). pp. 11351-11361.

Atnaw, S.M. and Kueh, S.C. and Sulaiman, S.A. (2014) Study on tar generated from downdraft gasification of oil palm fronds. The Scientific World Journal, 2014.

Atnaw, S.M. and Sulaiman, S.A. and Yusup, S. (2014) Influence of fuel moisture content and reactor temperature on the calorific value of Syngas resulted from gasification of oil palm fronds. The Scientific World Journal, 2014.

Aurelio, M.A. and Forbes, M.T. and Taguibao, K.J.L. and Savella, R.B. and Bacud, J.A. and Franke, D. and Pubellier, M. and Savva, D. and Meresse, F. and Steuer, S. and Carranza, C.D. (2014) Middle to late cenozoic tectonic events in south and central palawan (philippines) and their implications to the evolution of the south-eastern margin of South China Sea: Evidence from onshore structural and offshore seismic data. Marine and Petroleum Geology, 58 (PB). pp. 658-673.

Ayandotun, W.B. and Aziz, A.R.A. and Heikal, M.R. (2014) The effect of high carbon dioxide content on the performance and emission characteristics of a Direct Injection (DI) compressed natural gas engine. Applied Mechanics and Materials, 663. pp. 64-70.

Ayub, T. and Shafiq, N. and Fadhil Nuruddin, M. (2014) Stress-strain response of high strength concrete and application of the existing models. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1174-1190.

Ayub, T. and Shafiq, N. and Nuruddin, M.F. (2014) Effect of chopped basalt fibers on the mechanical properties and microstructure of high performance fiber reinforced concrete. Advances in Materials Science and Engineering, 2014.

Azeem, B. and Kushaari, K. and Man, Z. and Subbarao, D. (2014) Recent advancements on superabsorbent polymers to produce controlled release urea (short review). Applied Mechanics and Materials, 625. pp. 761-765.

Azeem, B. and Kushaari, K. and Man, Z.B. and Basit, A. and Thanh, T.H. (2014) Review on materials & methods to produce controlled release coated urea fertilizer. Journal of Controlled Release, 181 (1). pp. 11-21.

Azhar, M.A.I.M. and Chowdhury, S. and Mandal, P.C. and Daman, M.F. and Bhattacharjee, S. and Khanam, T. (2014) Ionic liquid-assisted synthesis and characterization of cerium oxide nanocubes for degradation of methylene blue. Applied Mechanics and Materials, 625. pp. 164-167.

Aziz, H.A. and Mohd Shariff, A. and Muhamad, M. (2014) Development of process safety management system (PSMS): Mechanical integrity (MI). Applied Mechanics and Materials, 625. pp. 486-489.

Aziz, H.A. and Shariff, A.M. and Rusli, R. (2014) Managing process safety information based on process safety management requirements. Process Safety Progress, 33 (1). pp. 41-48.

Aziz, H.A. and Shariff, A.M. and Rusli, R. (2014) Operational Training Management System (OPTRAMS) for safe operation in process plant. Advanced Materials Research, 917. pp. 325-331.

Aziz, H.A. and Shariff, A.M. and Rusli, R. and Yew, K.H. (2014) Managing process chemicals, technology and equipment information for pilot plant based on Process Safety Management standard. Process Safety and Environmental Protection, 92 (5). pp. 423-429.

Azizan, M.T. and Hellgardt, K. and Chadwick, D. (2014) Ethanol steam reforming over calcium doped Ni/Al2O3 catalyst. Applied Mechanics and Materials, 625. pp. 271-274.

Azizan, M.T. and Hellgardt, K. and Chadwick, D. (2014) Thermodynamic analysis of autothermal reforming of oxygenated hydrocarbons at thermoneutral condition for hydrogen production. Applied Mechanics and Materials, 625. pp. 730-733.

Azmi, W.H. and Sharma, K.V. and Sarma, P.K. and Mamat, R. and Anuar, S. and Syam Sundar, L. (2014) Numerical validation of experimental heat transfer coefficient with SiO2 nanofluid flowing in a tube with twisted tape inserts. Applied Thermal Engineering, 73 (1). pp. 296-306.

Azmi, W.H. and Sharma, K.V. and Sarma, P.K. and Mamat, R. and Anuar, S. and Syam Sundar, L. (2014) Numerical validation of experimental heat transfer coefficient with SiO2nanofluid flowing in a tube with twisted tape inserts. Applied Thermal Engineering, 73 (1). pp. 294-304.

Azmi, W.H. and Sharma, K.V. and Sarma, P.K. and Mamat, R. and Najafi, G. (2014) Heat transfer and friction factor of water based TiO2 and SiO2 nanofluids under turbulent flow in a tube. International Communications in Heat and Mass Transfer, 59. pp. 30-38.

Babiker, O.E. and Shuhaimi, M. and Mutalib, M.I.A. (2014) Molecular simulation for piperazinium based ILS: Effects of alkyl chain, concentration and anions on Henry�s constants. Applied Mechanics and Materials, 625. pp. 448-453.

Badruddin, N. and Evans, J. and Hanly, S.V. (2014) Binary power allocation in symmetric Wyner-type interference networks. IEEE Transactions on Wireless Communications, 13 (12). pp. 6903-6914.

Ban, Z.H. and Keong, L.K. and Shariff, A.M. (2014) Physical absorption of CO2 capture: A review. Advanced Materials Research, 917. pp. 134-143.

Ban, Z.H. and Kok Keong, L. and Shariff, A.M. (2014) Supersaturated gas bubble formation across an orifice. Applied Mechanics and Materials, 625. pp. 562-565.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. (2014) Application of experimental statistical method in optimizing preparation variables for Cu-Ni/TiO2 photocatalyst. Applied Mechanics and Materials, 625. pp. 856-859.

Bawadi, A. and Vo, D.-V.N. (2014) An evaluation of fish scales as potential adsorbents: pH and concentration effect. Applied Mechanics and Materials, 625. pp. 73-76.

Bayuaji, R. and Nuruddin, M.F. (2014) Influence of microwave incinerated rice husk ash on hydration of foamed concrete. Advances in Civil Engineering, 2014.

Bennett, D.G. (2014) Scientific method and human dignity in the balance. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 139-147.

Besrour, S. and Rahim, L.B.A. and Dominic, P.D.D. (2014) The study of available techniques for existing requirements engineering challenges based on literature review evidences. Research Journal of Applied Sciences, Engineering and Technology, 8 (19). pp. 2082-2091.

Bhattacharyya, E. (2014) Communicative competence in technical oral presentation: Perspective of ESL educators and professional engineer. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 1-16.

Bhattacharyya, E. and Sabdin, M. and Shaari, Z.H. (2014) Stepping up in harmony: Achieving cluster school excellence (CSE) Status for Non-CSE Malaysian secondary schools. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 51-63.

Bin Md Seri, S. and Bin Abdul Karim, Z.A. and Bin Salleh, H. and Mohideen Batcha, M.F. and Raghavan, V.R. (2014) Hydrodynamic characteristics of flow around tube bank with integral wake splitter. Applied Mechanics and Materials, 660. pp. 649-653.

Bin Mohd, M.H. and Kim, D.W. and Lee, B.J. and Kim, D.K. and Seo, J.K. and Paik, J.K. (2014) On the burst strength capacity of an aging subsea gas pipeline. Journal of Offshore Mechanics and Arctic Engineering, 136 (4).

Bin Ramli, M.S. and Basit, A. and Ku Shaari, K.Z. and Keong, L.K. (2014) Study of the effect of surface roughness on droplet spreading behavior using CFD modeling. Applied Mechanics and Materials, 625. pp. 378-381.

Bokhari, A. and Yusup, S. and Ahmad, J. and Kamil, R.N.M. (2014) Parametric study and improvement in fuel properties of pre-blended methyl esters from crude palm and rubber seed oil. Applied Mechanics and Materials, 625. pp. 494-497.

Bokhari, Awais and Yusup, Suzana and Ahmad, Junaid and Kamil, Ruzaimah N. M. (2014) Blending Study of Palm Oil Methyl Esters with Rubber Seed Oil Methyl Esters to Improve Biodiesel Properties. Chemical Engineering Transaction. ISSN 1974-9791 (Submitted)

Borhan, A. and Hoong, P.K. and Taha, M.F. (2014) Biosorption of heavy metal ions, oil and grease from industrial waste water by banana peel. Applied Mechanics and Materials, 625. pp. 749-752.

Bustam, M.A. and Muhamad, A.H. and Gonfa, G. and Man, Z. (2014) Benzene and cyclohexane separation using 1-propanenitrile-3-butylimidazolium dicyanamide ionic liquid. Advanced Materials Research, 879. pp. 58-62.

Butt, S.M. and Onn, A. and Butt, M.M. and Tabassam, N. (2014) Towards a model-based framework for integrating usability evaluation techniques in agile software model. Advances in Intelligent Systems and Computing, 287. pp. 561-570.

C. Fatah, M. and Ismail, M.C. and Ari-Wahjoedi, B. (2014) Corrosion behaviour of X52 steel in the presence of sulphite. Anti-Corrosion Methods and Materials, 61 (5). pp. 343-352.

Chakraborty, A. and Moniruzzaman, M. and Chowdhury, S. and Bhattacharjee, S. (2014) Kinetic studies on gold nanoparticle formation in aqueous medium. Applied Mechanics and Materials, 625. pp. 263-266.

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. and Kamil Wan Abdullah, W.A. and Mior Mokhtar, M.M. (2014) Gas void formation in statically cooled waxy crude oil. International Journal of Thermal Sciences, 86. pp. 41-47.

Chan, Y.H. and Dang, K.V. and Yusup, S. and Lim, M.T. and Zain, A.M. and Uemura, Y. (2014) Studies on catalytic pyrolysis of empty fruit bunch (EFB) using Taguchi's L9 Orthogonal Array. Journal of the Energy Institute, 87 (3). pp. 227-234.

Chan, Y.H. and Yusup, S. and Quitain, A.T. and Uemura, Y. and Sasaki, M. (2014) Bio-oil production from oil palm biomass via subcritical and supercritical hydrothermal liquefaction. Journal of Supercritical Fluids, 95. pp. 407-412.

Chatterjee, K. and Mitra, M. and Ganguly, S. and Kargupta, K. and Banerjee, D. (2014) Thermoelectric performance of electrodeposited nanostructured polyaniline doped with sulfo-salicylic acid. Journal of Applied Polymer Science, 131 (4).

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Comparative studies on catalytic and non-catalytic co-gasification of rubber seed shell and high density polyethylene mixtures. Journal of Cleaner Production, 70. pp. 303-314.

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Gasification conversion and char reactivity of rubber seed shell and high density polyethylene mixtures using steam Co-Gasification process. Chemical Engineering Transactions, 39 (Specia). pp. 679-684.

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Investigation of co-gasification of rubber seed shell and high density polyethylene mixtures. Chemical Engineering Transactions, 39 (Specia). pp. 505-510.

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Kinetic studies of co-pyrolysis of rubber seed shell with high density polyethylene. Energy Conversion and Management, 87. pp. 746-753.

Chin, S.C. and Shafiq, N. and Kusbiantoro, A. and Nuruddin, M.F. (2014) Reinforced concrete deep beams with openings strengthened using FRP � A review. Advanced Materials Research, 1025-1. pp. 938-943.

Ching, O.P. and Bak Lung, M.W. (2014) Effects of montmorillonite (MMT) inorganic fillers on polyvinylidene (PVDF) mixed matrix membrane. Applied Mechanics and Materials, 625. pp. 696-700.

Chong, Fai Kait and Nurlaela, Ela and Dutta, Binay Kanti (2014) Impact of Glycerol as Scavenger for Solar Hydrogen Production from Water. INTERNATIONAL JOURNAL of ENERGY and ENVIRONMENT. pp. 19-26. ISSN 2308-1007

Choong, K.W. and Wen, L.P. and Tiong, L.L. and Anosike, F. and Shoushtari, M.A. and Saaid, I.B.M. (2014) A comparative study on sand transport modeling for horizontal multiphase pipeline. Research Journal of Applied Sciences, Engineering and Technology, 7 (6). pp. 1017-1024.

Chowdhury, S. and Inayat, A. and Abdullah, B. and Omar, A.A. and Ganguly, S. (2014) Hydrogen and syngas generation from gasification of coal in an integrated fuel processor. Applied Mechanics and Materials, 625. pp. 644-647.

Chowdhury, S. and Leng, T.W. and Ahmed, I. and Bustam, A. and Shariff, A.M. (2014) Fine structural analysis of solvent activated Cu-BTC for carbon dioxide capture. Applied Mechanics and Materials, 625. pp. 209-212.

Daffalla, S.B. and Mukhtar, H. and Shaharun, M.S. (2014) Preparation and characterization of rice husk ash for adsorption of phenol from aqueous solutions. Applied Mechanics and Materials, 625. pp. 498-502.

Dahalan, A.A. and Sulaiman, J. and Muthuvalu, M.S. (2014) Performance of HSAGE method with seikkala derivative for 2-D fuzzy poisson equation. Applied Mathematical Sciences, 8 (17-20). pp. 885-899.

Dan-Mallam, Y. and Abdullah, M.Z. and Megat Yusoff, P.S.M. (2014) The effect of hybridization on mechanical properties of woven kenaf fiber reinforced polyoxymethylene composite. Polymer Composites, 35 (10). pp. 1900-1910.

Dan-Mallam, Y. and Abdullah, M.Z. and Yusoff, P.S.M.M. (2014) Mechanical properties of recycled kenaf/polyethylene terephthalate (PET) fiber reinforced polyoxymethylene (POM) hybrid composite. Journal of Applied Polymer Science, 131 (3).

Daneshfozoun, S. and Abdullah, B. and Abdullah, M.A. (2014) Heavy metal removal by oil palm empty fruit bunches (OPEFB) biosorbent. Applied Mechanics and Materials, 625. pp. 889-892.

Dang, K.V. and Yusup, S. and Uemura, Y. (2014) Studies on pyrolysis of rice husk using Taguchi's l9 Orthogonal Array. Applied Mechanics and Materials, 625. pp. 630-634.

Dass, S.C. and Lim, C.Y. and Maiti, T. (2014) A generalized mixed model framework for assessing fingerprint individuality in presence of varying image quality. Annals of Applied Statistics, 8 (3). pp. 1314-1340.

Daud, H. and Gulcharan, N.F.I. and Azhar, M.A.M. and Samsudin, M.Z. and Nor, N.M. and Ibrahim, T. (2014) Monitoring heart rate and body temperature using wireless technology (Zigbee). Applied Mechanics and Materials, 490-49. pp. 1565-1574.

David Menier, Yazid Mansor, Benjamin Sautter, Manuel Pubellier, , . (2014) Geomorphology and regional stratigraphic model of Cenozoic deposits from" Continental to Marine" of Western Peninsular Malaysia and Strait of Malacca. Geomorphology and regional stratigraphic model of Cenozoic deposits from" Continental to Marine" of Western Peninsular Malaysia and Strait of Malacca..

Dewangan, S. and Biswas, C.K. and Gangopadhyay, S. (2014) Influence of different tool electrode materials on EDMed surface integrity of AISI P20 tool steel. Materials and Manufacturing Processes, 29 (11-12). pp. 1387-1394.

Dewangan, S. and Biswas, C.K. and Gangopadhyay, S. (2014) Influence of different tool electrode materials on EDMed surface integrity of AISI P20 tool steel. Materials and Manufacturing Processes, 29 (11-12). pp. 1387-1394.

Dubois, A. and Menier, D. and Sedrati, M. (2014) Morphologie and hydrodynamic impact of a period of high energy in the intertidal section of an embayed beach and in three mesotidal semi-sheltered pocket beaches: Example of the Xynthia storm in the Rhuys peninsula (France). Landbauforschung (3). pp. 227-242.

El-Harbawi, M. and Samir, B.B. and Babaa, M.-R. and Mutalib, M.I.A. (2014) A New QSPR Model for Predicting the Densities of Ionic Liquids. Arabian Journal for Science and Engineering, 39 (9). pp. 6767-6775.

Elkhalifah, A.E.I. and Bustam, M.A. and Shariff, A.M. and Ullah, S. and Shimekit, B. and Riaz, N. (2014) Effects of intercalated mono-, di- and triethanolammonium cations on the structural and surface characteristics of sodium form of bentonite. Applied Mechanics and Materials, 625. pp. 98-101.

Ellateif, T.M.A. and Maitra, S. and Murugesan, T. and Mohd Azizi, K.A. (2014) Effect of aluminium sol on silica nanoparticles texture and properties. Advanced Materials Research, 917. pp. 56-60.

Ellateif, T.M.A. and Mitra, S. and Murugesan, T. and Azizi, K. (2014) Preparation and characterization of hydrophobic silica zirconium nanoparticles. Applied Mechanics and Materials, 625. pp. 503-508.

Elochukwu, O.H. and Saaid, I.M. and Pilus, R.M. (2014) Organic deposit remediation using environmentally benign solvents: A review. ARPN Journal of Engineering and Applied Sciences, 9 (10). pp. 1930-1935.

Elsheikh, Y.A. and Man, Z. and Bustam, M.A. and Akhtar, F.H. and Yusup, S. and Muhammad, A. (2014) Preparation and characterisation of Citrulus colocynthis oil biodiesel: Optimisation of alkali-catalysed transesterification. Canadian Journal of Chemical Engineering, 92 (3). pp. 435-440.

Eltoukhy, M.M. and Faye, I. (2014) An optimized feature selection method for breast cancer diagnosis in digital mammogram using multiresolution representation. Applied Mathematics and Information Sciences, 8 (6). pp. 2921-2928.

Ezechi, E.H. and Isa, M.H. and Kutty, S.R.M. and Yaqub, A. (2014) Boron removal from produced water using electrocoagulation. Process Safety and Environmental Protection, 92 (6). pp. 509-514.

Fadhil, M. and Hassan, A. and Aris, S. and Abdalla, A. and Aniza, N. (2014) The prospects of electricity generation from Poultry Processing Dewatered Sludge (PPDS) in Malaysia. Advanced Materials Research, 970. pp. 228-232.

Fageeri, S.O. and Ahmad, R. and Baharudin, B. (2014) A log file analysis technique using binary-based approach. Lecture Notes in Electrical Engineering, 285 LN. pp. 3-11.

Faisal, A. and Ramasamy, M. and Shuhaimi, M. and Rahim, M. (2014) Identification of multi-input multi-output systems using combined direct and indirect methods. Applied Mechanics and Materials, 625. pp. 414-417.

Faiz, A. and Sami, U. and Hammad, A. and Nor Sharifah, O. (2014) Thermal performance of glass fiber reinforced intumescent fire retardant coating for structural applications. Malaysian Journal of Microscopy, 10 (1). pp. 92-98.

Faizal, A.M. and Kutty, S.R.M. (2014) Modelling of Adams-Bohart and Yoon-Nelson on the removal of oil from water using microwave incinerated rice husk ash (MIRHA). Applied Mechanics and Materials, 625. pp. 788-791.

Farnam, M. and Mukhtar, H. and Shariff, A.M. (2014) A review on glassy polymeric membranes for gas separation. Applied Mechanics and Materials, 625. pp. 701-703.

Fatah, I.Y.A. and Abdul Khalil, H.P.S. and Hossain, M.S. and Aziz, A.A. and Davoudpour, Y. and Dungani, R. and Bhat, A. (2014) Exploration of a chemo-mechanical technique for the isolation of nanofibrillated cellulosic fiber from oil palm empty fruit bunch as a reinforcing agent in composites materials. Polymers, 6 (10). pp. 2611-2624.

Fathiyah Jamaludin, S.N. and Pubellier, M. and Menier, D. (2014) Relationship between syn-depositional faulting and carbonate growth in Central Luconia Province, Malaysia. Bulletin of the Geological Society of Malaysia, 60. pp. 77-83.

Fayek, H.M. and Elamvazuthi, I. and Perumal, N. and Venkatesh, B. (2014) A controller based on Optimal Type-2 Fuzzy Logic: Systematic design, optimization and real-time implementation. ISA Transactions, 53 (5). pp. 1583-1591.

Financie, R. and Moniruzzaman, M. and Uemura, Y. and Osman, N. (2014) Recent advances of using ionic liquid in lignocellulosic biomass degradation. Applied Mechanics and Materials, 625. pp. 834-837.

Firas, A.A.K. and Shariff, A.M. and Keong, L.K. and Mellon, N. (2014) Novel approach and setup for multi component mixtures separation and analysis at offshore conditions. Applied Mechanics and Materials, 625. pp. 600-603.

Firas, A.A.K. and Shariff, A.M. and Keong, L.K. and Mellon, N. (2014) Novel approach and setup for multi phase mixtures separation and analysis at offshore conditions. Applied Mechanics and Materials, 625. pp. 669-672.

Firas, A.A.K. and Shariff, A.M. and Keong, L.K. and Mellon, N. (2014) Novel approach for CO2-enriched natural gas dehydration via adsorption using 13X zeolite as solid desiccants. Materials Research Innovations, 18. S6-228-S6-231.

Foong, O.-M. and Yong, J.-M. and Sulaiman, S. and Rambli, D.R.A. (2014) Mobile health awareness in pre-detection of mild stroke symptoms. Journal of Computer Science, 10 (12). pp. 2383-2394.

Foong, O.-M. and Yong, S.-P. and Lee, A.-L. (2014) Text summarization in android mobile devices. Lecture Notes in Electrical Engineering, 285 LN. pp. 571-578.

GHOSH, DEVA and MUHAMMAD, SAJID and IBRAHIM, NOR AZHAR and VIRATNO, BERNATO (2014) Seismic attributes add a new dimension to prospect evaluation and geomorphology offshore Malaysia. Seismic attributes add a new dimension to prospect evaluation and geomorphology offshore Malaysia.

GHOSH, DEVA and SAJID, MUHAMMAD and IBRAHIM, NOR AZHAR and VIRATNO, BERNATO (2014) Seismic attributes add a new dimension to prospect evaluation and geomorphology offshore Malaysia. THE LEADING EDGE.

Ganesan, T. (2014) Investigation of dephasing in an open quantum system under chaotic influence via a fractional Kohn-Sham scheme. International Journal of Quantum Chemistry, 114 (24). pp. 1660-1669.

Gardezi, S.S.S. and Shafiq, N. and Zawawi, N.A.W.A. and Farhan, S.A. (2014) Embodied carbon potential of conventional construction materials used in typical malaysian single storey low cost house using building information modeling (BIM). Advanced Materials Research, 1043. pp. 242-246.

Ghazali, Z. and Halib, M. (2014) In the shadow of asset security: Corporate social responsibility Programme by the greater Nile petroleum operating company (GNPOC), Republic of Sudan. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 111-125.

Ghosh, P. and Halder, D. and Ganguly, S. and Banerjee, D. and Kargupta, K. (2014) Phosphosilicate gel-polybenzimidazole nanocomposite novel membrane for fuel cell application. International Journal of Plastics Technology, 18 (3). pp. 403-408.

Gilani, S.I.H. and Aris, M.S. and Bhaskoro, P.T. (2014) Energy saving technique for cooling dominated academic building: Techno-economic analysis of its application. Applied Energy, 132. pp. 192-199.

Gilassi, S. and Man, Z. and Maulud, A.S. and Idris, A. (2014) Modeling of CO2 capture by amine solution (MDEA) in hollow fiber membranes. Applied Mechanics and Materials, 625. pp. 537-540.

Goh Thian Lai, Abdul Ghani Rafek, Ailie Sofyiana Serasa, Norbert, . (2014) Empirical correlation of uniaxial compressive strength and primary wave velocity of Malaysian granites. Empirical correlation of uniaxial compressive strength and primary wave velocity of Malaysian granites.

Guan, B.H. and Chuan, L.K. and Soleimani, H. (2014) Synthesis, characterization and influence of calcinations temperature on magnetic properties of Ni0.75Zn0.25Fe2O4 nanoparticles synthesized by sol-gel technique. American Journal of Applied Sciences, 11 (6). pp. 878-882.

Guan, B.H. and Zahari, M.H. and Chuan, L.K. (2014) Structural and magnetic properties of Ni0.5Zn0.5Fe2O4 synthesized through the sol-gel method. Applied Mechanics and Materials, 664. pp. 75-79.

Guangul, F.M. and Sulaiman, S.A. and Ramli, A. (2014) Study of the effects of operating factors on the resulting producer gas of oil palm fronds gasification with a single throat downdraft gasifier. Renewable Energy, 72. pp. 271-283.

Gupta, R. and Elamvazuthi, I. and Dass, S.C. and Faye, I. and Vasant, P. and George, J. and Izza, F. (2014) Curvelet based automatic segmentation of supraspinatus tendon from ultrasound image: A focused assistive diagnostic method. BioMedical Engineering Online, 13 (1).

Habib, K. and Saha, B.B. and Koyama, S. (2014) Study of various adsorbent-refrigerant pairs for the application of solar driven adsorption cooling in tropical climates. Applied Thermal Engineering, 72 (2). pp. 266-274.

Habib, Khairul and Saha, Bidyut B. and Koyama, Shigeru (2014) Study of various adsorbenterefrigerant pairs for the application of solar driven adsorption cooling in tropical climates. Applied Thermal Engineering, 72. pp. 266-274. ISSN 13594311

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2014) Syngas (H2/CO) in a spark-ignition direct-injection engine. Part 1: Combustion, performance and emissions comparison with CNG. International Journal of Hydrogen Energy, 39 (31). pp. 17884-17895.

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2014) Trends of syngas as a fuel in internal combustion engines. Advances in Mechanical Engineering, 2014.

Hamdi, Z. and Awang, M. (2014) Introducing new slug size method in water alternating CO2 for enhanced oil recovery. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1239-1243.

Hamidi, R.M. and Man, Z. and Azizli, K.A. and Ismail, L. and Nuruddin, M.F. (2014) Mechanical activation of fly ash by high energy planetary ball mill and the effects on physical and morphology properties. Applied Mechanics and Materials, 625. pp. 38-41.

Hamzah, N.H.A. and Chowdhury, S. and Sufian, S. and Omar, A.A. and Inayat, A. (2014) Development of morphology dependent titania nanomaterial for photo degradation of dyes. Applied Mechanics and Materials, 625. pp. 349-352.

Hanaei, H. and Murugesan, T. (2014) Phase diagram of an aqueous salt-polymer system composed of poly ethylene glycol 4000 + Na3C6H5O7+ H2O. Applied Mechanics and Materials, 625. pp. 574-577.

Hani, A.F.M. and Baba, R. and Shamsuddin, N. and Nugroho, H. (2014) Determination of melanin types and relative concentrations: An observational study using a non-invasive inverse skin reflectance analysis. International Journal of Cosmetic Science, 36 (5). pp. 451-458.

Hani, A.F.M. and Paputungan, I.V. and Hassan, M.F. (2014) Service level agreement renegotiation framework for trusted cloud-based system. Lecture Notes in Electrical Engineering, 276. pp. 55-61.

Hani, A.F.M. and Sathyamoorthy, D. and Asirvadam, V.S. (2014) Computing uncertainty of physiographic features extracted from multiscale digital elevation models. Computers and Geosciences, 64. pp. 15-23.

Harikrishnan, K. and Ashok, D. and Dominic, P.D.D. and Anand, S.J.J. (2014) A study on psychological modelling of market maven for marketing operations with special reference to Indian market. International Journal of Business Excellence, 7 (4). pp. 473-498.

Harimurt, S. and Ur Rahmah, A. and Aziz Omar, A. and Murugesan, T. (2014) UV/H2O2 process for removal of total organic carbon from refinery effluent: Screening of influence factors using response surface methodology. Advanced Materials Research, 917. pp. 168-177.

Harun, H. and Salleh, R. and Memon, M.A. and Baharom, M.N.R. and Abdullah, A. (2014) Job satisfaction, organizational commitment and stress among offshore oil and gas platform employees. Asian Social Science, 10 (11). pp. 28-32.

Hasan, M.H. and Jaafar, J. and Hassan, M.F. (2014) Development of Web services fuzzy quality models using data clustering approach. Lecture Notes in Electrical Engineering, 285 LN. pp. 631-640.

Hasan, M.H. and Jaafar, J. and Hassan, M.F. (2014) Monitoring web services� quality of service: a literature review. Artificial Intelligence Review, 42 (4). pp. 835-850.

Hashim, F.M. and Ahmad, M.F.A. (2014) Numerical simulation of supersonic subsea compact wet gas separator for gas transmission pipeline. Applied Mechanics and Materials, 607. pp. 298-302.

Hashmet, M.R. and Onur, M. and Tan, I.M. (2014) Empirical Correlations for Viscosity of Polyacrylamide Solutions with the Effects of Temperature and Shear Rate. II. Journal of Dispersion Science and Technology, 35 (12). pp. 1685-1690.

Hassan, S. and Duclaux, L. and Lévêque, J.-M. and Reinert, L. and Farooq, A. and Yasin, T. (2014) Effect of cation type, alkyl chain length, adsorbate size on adsorption kinetics and isotherms of bromide ionic liquids from aqueous solutions onto microporous fabric and granulated activated carbons. Journal of Environmental Management, 144. pp. 108-117.

Hassan, S. and H, H. and Ghaffari, A. (2014) Development of thermal insulation from oil palm fiber for chimney of fire tube steam packaged boiler. Applied Mechanics and Materials, 666. pp. 31-35.

Hassim, M.H. and Foo, D.C.Y. and Shariff, A.M. (2014) Editorial. Process Safety and Environmental Protection, 92 (5). pp. 377-378.

Hayder, G. and Ramli, M.Z. and Malek, M.A. and Khamis, A. and Hilmin, N.M. (2014) Prediction model development for petroleum refinery wastewater treatment. Journal of Water Process Engineering, 4 (C). pp. 1-5.

Hermana , Maman and Tuan Harith, Zuhar Zahir and Sum, Chow Weng and Ghosh, Deva Prasad (2014) Is the Qp/Qs Attribute Better for Hydrocarbon Prediction? Journal of Applied Sciences. ISSN 18125654

Herng, C.Y. and Yusup, S. and Quitain, A.T. and Uemura, Y. (2014) Bio-oil production under sub- and supercritical hydrothermal liquefaction of oil palm empty fruit bunch and Kernel Shell. Applied Mechanics and Materials, 625. pp. 881-884.

Hidayat, M.I.P. and Wahjoedi, B.A. and Parman, S. and Megat Yusoff, P.S.M. (2014) Meshless local B-spline-FD method and its application for 2D heat conduction problems with spatially varying thermal conductivity. Applied Mathematics and Computation, 242. pp. 236-254.

Hing, Y.K. and Chin, W.M. and Heikal, M.R. (2014) Numerical and experimental determination of wavy fintube shape factor. Journal of Mechanical Engineering and Sciences, 6. pp. 889-900.

Ho, W.S. and Khor, C.S. and Hashim, H. and Macchietto, S. and Klemeš, J.J. (2014) SAHPPA: A novel power pinch analysis approach for the design of off-grid hybrid energy systems. Clean Technologies and Environmental Policy, 16 (5). pp. 957-970.

Hosseinipour, A. and Sabil, K.M. and Arya Ekaputra, A. and Japper, A.B. and Ismail, L. (2014) The impact of the composition of the crude oils on the wax crystallization. Applied Mechanics and Materials, 625. pp. 196-200.

Hui Ying, N. and Yin Fong, Y. (2014) Heavy metal ions removal using amine-functionalized mesoporous adsorbents. Applied Mechanics and Materials, 625. pp. 65-68.

Hussain, G. and Khan, F.U. and Khan, I.U. and Muhammad, N. and Jan, S. and Aziz, T. and Tariq, M. and Hussain, A. and Asimullah, A. and Bilal, H. and Shahidullah, S. and Abdullah, A. and Khan, S.U. and Ud Din, S. (2014) Chemical parameters and microbial analysis of potable water of various tehsils in North Waziristan agency. World Applied Sciences Journal, 32 (6). pp. 1053-1056.

Hussain, I. and Ullah, R. and AbdElsalam, N.M. and Hayat, S. and Uddin, K. and Khan, J. and Akhtar, N. and Ullah, Z. (2014) Antibacterial and preliminary phytochemicals screening of theraxicum officinale. Journal of Pure and Applied Microbiology, 8. pp. 535-538.

Hussin, H. and Mokhtar, A.A. and Muhammad, M. (2014) Identification of critical factors to system performance using availability modeling and simulation analysis. Applied Mechanics and Materials, 490-49. pp. 1759-1763.

Ibrahim, M.T. and Yusoff, N. (2014) Optimization of condensate fractionation unit using response surface methodology. Applied Mechanics and Materials, 625. pp. 462-465.

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Effect of nitriding on reaction layer of diffusion bonded sialon to AISI 420 martensitic stainless steel. Applied Mechanics and Materials, 660. pp. 178-184.

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Microstructure and hardness of diffusion bonded sialon-AISI 420 martensitic stainless steel. Advanced Materials Research, 974. pp. 199-204.

Idaham, N.F. and Bustam, M.A. and Kait, C.F. and Man, Z. (2014) Recovery of 1-butyl-3-methylimidazolium-based ionic liquids. Advanced Materials Research, 879. pp. 230-236.

Idaham, N.F. and Bustam Khalil, M.A. and Kait, C.F. (2014) Study on the recovery of 1-butyl-3-methylimidazolium-based ionic liquids. Applied Mechanics and Materials, 625. pp. 144-147.

Idris, A. and Man, Z.B. and Maulud, A.S. and Gilassi, S. (2014) Phase behavior and ternary diagram construction for membrane forming polycarbonate solutions. Applied Mechanics and Materials, 625. pp. 7-10.

Idris, A. and Rahmanian, N. (2014) γ-ray pre-irradiated grafting of polytetrafluoroethylene film membrane. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 47-51.

Idrus, H. and Dahan, H.M. and Abdullah, N. (2014) Integrating soft skills in the teaching of hard sciences at a private university: A preliminary study. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 17-32.

Ilyas, S.U. and Pendyala, R. and Marneni, N. (2014) Dispersion behaviour and agglomeration effects of zinc oxide nanoparticles in ethanol-water mixtures. Materials Research Innovations, 18. S6-179-S6-183.

Ilyas, S.U. and Pendyala, R. and Marneni, N. (2014) Preparation, sedimentation, and agglomeration of nanofluids. Chemical Engineering and Technology, 37 (12). pp. 2011-2021.

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. and Khan, Z. (2014) Mathematical modelling for hydrogen production from steam gasification of cellulose. Applied Mechanics and Materials, 625. pp. 176-179.

Iqbal, A. and Jeoti, V. (2014) An improved split-stepwavelet transform method for anomalous radiowave propagation modeling. Radioengineering, 23 (4). pp. 987-996.

Iqbal, M.J. and Faye, I. and Md Said, A. and Samir, B.B. (2014) Data mining of protein sequences with amino acid position-based feature encoding technique. Lecture Notes in Electrical Engineering, 285 LN. pp. 119-126.

Iqbal, M.J. and Faye, I. and Samir, B.B. and Md Said, A. (2014) Efficient feature selection and classification of protein sequence data in bioinformatics. Scientific World Journal, 2014.

Irfan Khan, M. and Azizli, K. and Sufian, S. and Man, Z. (2014) Effect of Na/Al and Si/Al ratios on adhesion strength of geopolymers as coating material. Applied Mechanics and Materials, 625. pp. 85-89.

Irii, T. and Murata, S. and Tanoue, K. and Nishimur, T. and Uemura, Y. and Taniguchi, M. and Sasauchi, K. (2014) Experimental study on heat and mass transfer during fast pyrolysis of biomass particle. Applied Mechanics and Materials, 625. pp. 620-625.

Irniza, R. and Emilia, Z.A. and Muhammad Saliluddin, S. and Nizam Isha, A.S. (2014) A psychometric properties of the Malay-version police stress questionnaire. Malaysian Journal of Medical Sciences, 21 (4). pp. 42-50.

Irshad, M.I. and Ahmad, F. and Mohamed, N.M. and Abdullah, M.Z. (2014) Preparation and structural characterization of template assisted electrodeposited copper nanowires. International Journal of Electrochemical Science, 9 (5). pp. 2548-2555.

Isa, M.H. and Ezechi, E.H. and Ahmed, Z. and Magram, S.F. and Kutty, S.R.M. (2014) Boron removal by electrocoagulation and recovery. Water Research, 51. pp. 113-123.

Ismael, M.A. and Heikal, M.R. and Bahroom, M.B. (2014) Spray characteristics of diesel-CNG dual fuel jet using schlieren imaging technique. Applied Mechanics and Materials, 663. pp. 58-63.

Ismail, A.F. and Sapari, N. and Abdul Wahab, M.M. (2014) Vegetative swale for treatment of stormwater runoff from construction site. Pertanika Journal of Science and Technology, 22 (1). pp. 55-64.

Izhar, S.M.M. and Ku Shaari, K.Z. and Man, Z. and Samsudin, Y.N. (2014) Influence of citric acid and curing time on water uptake. Applied Mechanics and Materials, 625. pp. 123-126.

Izyan, Z.N. and Shuhaimi, M. (2014) Exergy analysis for fuel reduction strategies in crude distillation unit. Energy, 66. pp. 891-897.

Jaber, A.K. and Shuker, M.T. (2014) Integrated petrophysical evaluation of a heterogeneous shaly-sand reservoir: A case study in nahr umr formation-subba giant oil field, Iraq. Research Journal of Applied Sciences, Engineering and Technology, 8 (24). pp. 2388-2402.

Jamaludin, Siti Nur Fathiyah and Pubellier, Manuel and Ghosh, Deva Prasad and Menier, David and Pierson, Bernard (2014) The Role of Faulting on the Growth of a Carbonate Platform: Evidence from 3D Seismic Analysis and Section Restoration. Geophysical Research Abstracts.

Jamil, A. and Ching, O.P. and Shariff, A.B.M. (2014) Polymer-nanoclay mixed matrix membranes for CO2/CH4 separation: A review. Applied Mechanics and Materials, 625. pp. 690-695.

Jamil, F. and Bawadi, B.A. and Ahmad, M.M. and Inayat, A. and Yusup, S. (2014) Catalytic cracking of synthetic bio-oil: Kinetic studies. Applied Mechanics and Materials, 625. pp. 259-262.

Jamil, M.F. and Uemura, Y. and Osman, N. and Kusakabe, K. and Yusup, S. (2014) Review on extraction and characterization of castor seed oil. Applied Mechanics and Materials, 625. pp. 916-919.

Janier, J.B. and Jalil, M.A.B. and Razali, R.B. and Shafie, A.B. and Abdul Karim, S.A.B. (2014) Effects of varied amount of carbon dioxide and pressure on asphaltene stability. Advances in Environmental Biology, 8 (14). pp. 39-43.

Jatoi, M.A. and Kamel, N. and Malik, A.S. and Faye, I. (2014) EEG based brain source localization comparison of sLORETA and eLORETA. Australasian Physical and Engineering Sciences in Medicine, 37 (4). pp. 713-721.

Javed, E. and Faye, I. and Malik, A.S. and Abdullah, J.M. (2014) A hybrid method to improve the reduction of ballistocardiogram artifact from EEG data. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8835. pp. 186-193.

Jilani, M.T. and Wen, W.P. and Cheong, L.Y. and Zakariya, M.A. and Rehman, M.Z.U. (2014) Equivalent circuit modeling of the dielectric loaded microwave biosensor. Radioengineering, 23 (4). pp. 1038-1047.

Johnson, O.A. and Madzlan, N. and Kamaruddin, I.B. (2014) Effect of curing age on the compressive strength of petrovege blocks. Advanced Materials Research, 980. pp. 91-96.

Johnson, O.A. and Napiah, M. and Kamaruddin, I. (2014) Potential uses of waste sludge in construction industry: A review. Research Journal of Applied Sciences, Engineering and Technology, 8 (4). pp. 565-570.

Jusoh, N. and Keng, L.K. and Shariff, A.M. (2014) Preparation and characterization of polysulfone membrane for gas separation. Advanced Materials Research, 917. pp. 307-316.

Jusoh, N. and Lau, K.K. and Shariff, A.M. (2014) Removal of bulk CO2 from methane with the presenceof heavy hydrocarbon using polyimide membrane. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 41-46.

Kadry, H. and Zakaria, N. and Cheong, L.Y. and Abdel-Aty, M. (2014) Entropy squeezing of multi-photon field interacting with a single Cooper-pair box. Optik, 125 (18). pp. 5134-5140.

Kaeomanee, Y. and Dominic, P.D.D. and Rias, R.M. (2014) Examining the social software characteristics and knowledge sharing behaviour among university students in Malaysia. International Journal of Business Information Systems, 17 (1). pp. 67-93.

Kajo, I. and Kamel, N. and Malik, A.S. (2014) A comparison study on different crowd motion estimation algorithms using matlab. Lecture Notes in Electrical Engineering, 285 LN. pp. 327-334.

Kalwar, S.A. and Elraies, K.A. (2014) A rheological study of polymer using precipitation inhibitor, alkali, and surfactant for high salinity in carbonate reservoirs. Petroleum Science and Technology, 32 (19). pp. 2329-2336.

Kamel, Nidal and Malik, A (2014) The fundamentals of EEG signal processing. EEG/ERP Analysis: Methods and Applications. pp. 21-71.

Kareem, M.W. and Habib, K. and Gilani, S.I. (2014) A review of solar air heater for drying of agricultural products. Advanced Materials Research, 903. pp. 239-244.

Karim, A.N.M. and Ikram, M. and Emrul Kays, H.M. and Abdesselam, M. and Ginta, T.L. (2014) Assessment of machining cost for end-milling of Ti-6Al-4V titanium alloy through RSM-based parametric model. Advanced Materials Research, 903. pp. 83-89.

Karim, R.A. and Hussain, A.S. and Mohd Zain, A. (2014) Production of bioethanol from empty fruit bunches cellulosic biomass and Avicel PH-101 cellulose. Biomass Conversion and Biorefinery, 4 (4). pp. 333-340.

Karim, S.A.A. (2014) Monotonic interpolating curves by using rational cubic ball interpolation. Applied Mathematical Sciences, 8 (145-14). pp. 7259-7276.

Karim, S.A.A. and Kong, V.P. (2014) Convexity-preserving using rational cubic spline interpolation. Research Journal of Applied Sciences, Engineering and Technology, 8 (3). pp. 312-320.

Karuppanan, S. and Abdul Wahab, A. and Patil, S. and Zahari, M.A. (2014) Estimation of burst pressure of corroded pipeline using finite element analysis (FEA). Advanced Materials Research, 879. pp. 191-198.

Kaur, R. and Khan, A.A.A. and Dennis, J.O. and Abdullah, M.A. (2014) Screen-printed carbon electrodes for the detection of boldenone. Applied Mechanics and Materials, 625. pp. 809-812.

Kazimi, M.R. and Shah, T. and Jamari, S.S.B. and Ahmed, I. and Faizal, C.K.M. (2014) Sulfonation of low-density polyethylene and its impact on polymer properties. Polymer Engineering and Science, 54 (11). pp. 2522-2530.

Kee, K.E. and Richter, S. and Babic, M. and Nesic, S. (2014) Flow patterns and water wetting in oil-water two phase flow - A flow loop study. NACE - International Corrosion Conference Series.

Kee, K.E. and Richter, S. and Babic, M. and Nesic, S. (2014) Flow patterns and water wetting in oil-water two phase flow - A flow loop study. NACE - International Corrosion Conference Series.

Kee, W.M. and Shariff, A.M. and Bustam, M.A. and Keong, L.K. and Karikalan, T. and Murshid, G. (2014) Density, viscosity and CO2 solubility of novel solvent. Advanced Materials Research, 917. pp. 301-306.

Kermanioryani, M. and Ismail, L.B. and Abdul Mutalib, M.I. and Bagherzadeh, G. (2014) Removal of methylene blue from aqueous solution by ionic liquid. Applied Mechanics and Materials, 625. pp. 241-244.

Khalaji Assadi, Morteza (2014) Investigation and Measurement of Copper Nanofluid Impact on Thermal Efficiency of Solar Collectors. MATEC Web of Conferences, 13.

Khalaji Assadi, Morteza (2014) Skylight Application for Natural Lighting in a Building; the University of Tehran Branch of Melli Bank Case Study. MATECWeb of Conferences13,06003, 13.

Khalaji Assadi, Morteza (2014) Technical-Economic Analysis of Steam Double Effect Absorption Chiller-Heaters Equipped with Solar Heat Pipe System. Applied Mechanics and Materials, 465-46. pp. 327-334.

Khalaji Assadi , Morteza and Habib, Khairul (2014) Solar Energy Potential Estimation in Perak Using Clearness Index and Artificial Neural Network. MATEC Web of Conferences, 3.

Khalid, S. and Wen, W.P. and Cheong, L.Y. (2014) Optimum filter synthesis procedure for ultra-wideband bandpass filter using step-impedance resonator. Journal of Electromagnetic Waves and Applications, 28 (8). pp. 943-955.

Khalid, S. and Wen, W.P. and Cheong, L.Y. (2014) Synthesis design of UWB bandpass filter using multiple resonance resonator (MRR). Electronics Letters, 50 (24). pp. 1851-1853.

Khalidah, K.A. and Rohani, S. and Mashitah, S. (2014) Ethical values and commitment towards achieving excellence: A study on public boarding school students in Malaysia. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 33-50.

Khan, A.A. and Basri, S. and Fazal-e-Amin (2014) A survey based study on factors effecting communication in GSD. Research Journal of Applied Sciences, Engineering and Technology, 7 (7). pp. 1123-1131.

Khan, A.S. and Man, Z.B. and Bustam Khalil, M.A. and Kait, C.F. and Maulud, A.S. (2014) Effect of ball milling on the catalytic conversion of cellulose to levulinic acid. Applied Mechanics and Materials, 625. pp. 353-356.

Khan, D. and Khan, H.U. and Khan, F. and Khan, S. and Badshah, S. and Khan, A.S. and Samad, A. and Ali, F. and Khan, I. and Muhammad, N. (2014) New cholinesterase inhibitory constituents from Lonicera quinquelocularis. PLoS ONE, 9 (4).

Khan, F.A. and Zahoor, M. and Ullah, R. and Abd El-Salam, N.M. and Khan, J. and Ullah, N. and Ullah, Z. (2014) Assessment of mycobiota and aflatoxins in poultry feeds collected from poultry farms. Journal of Pure and Applied Microbiology, 8. pp. 437-445.

Khan, H. and Daraz, N. and Khan, M.N. and Said, M. and Akhtar, N. and Badshah, A. and Khan, A.S. and Ali, M. (2014) Synthesis, Structural Characterization, and Evaluation of the Biological Properties of Heteroleptic Palladium(II) Complexes. Bioinorganic Chemistry and Applications, 2014.

Khan, H. and Dominic, P.D.D. (2014) User acceptance of online system: A study of banking and airline sector. International Journal of Business Information Systems, 16 (4). pp. 359-374.

Khan, J.A. and Pao, W.K. (2014) Effect of different qualities of foam on fill particle transport in horizontal well cleanup operation using coiled tubing. Advanced Materials Research, 903. pp. 39-44.

Khan, K. and Baharudin, B. and Khan, A. and Ullah, A. (2014) Mining opinion components from unstructured reviews: A review. Journal of King Saud University - Computer and Information Sciences, 26 (3). pp. 258-275.

Khan, M.A. and Hasbullah, H. and Nazir, B. and Khan, I.A. (2014) An energy efficient simultaneous-node repositioning algorithm for mobile sensor networks. Scientific World Journal, 2014.

Khan, M.A. and Jeoti, V. (2014) A Novel Design of Chaos Based S-Box Using Difference Distribution Table (CD S-Box). Communications in Computer and Information Science, 420 CC. pp. 223-230.

Khan, M.A. and Saddiq, S.F. and Islam, S. and Khan, I. and Ching, D.L.C. (2014) Epidemic model of leptospirosis containing fractional order. Abstract and Applied Analysis, 2014.

Khan, M.T. and Zakariya, M.A. and Baharudin, Z. and Ibrahim, R. and Hong, S.S.B. and Adz, J.J. (2014) An Overview of defected ground structure with practical application of defected ground structure bandpass filter in energy harvester circuit. Research Journal of Applied Sciences, Engineering and Technology, 8 (7). pp. 837-843.

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. and Tan, I.M. (2014) Experimental investigation of microexplosion occurrence in water in diesel emulsion droplets during the leidenfrost effect. Energy and Fuels, 28 (11). pp. 7079-7084.

Khan, S. and Zain, A.M. and Murugesan, T. and Abdullah, M.A. (2014) Antioxidant activity and HPLC analysis of gallic acid phenolic compound from Nephelium lappaceum leaves. Applied Mechanics and Materials, 625. pp. 15-18.

Khan, Z. and Yusup, S. and Ahmad, M.M. (2014) Performance study of Ni catalyst with quicklime (CaO) as CO2 adsorbent in palm kernel shell steam gasification for hydrogen production. Advanced Materials Research, 917. pp. 283-291.

Khan, Z. and Yusup, S. and Ahmad, M.M. and Chin, B.L.F. (2014) Hydrogen production from palm kernel shell via integrated catalytic adsorption (ICA) steam gasification. Energy Conversion and Management, 87. pp. 1224-1230.

Khan, Z. and Yusup, S. and Ahmad, M.M. and Rashidi, N.A. (2014) Integrated catalytic adsorption (ICA) steam gasification system for enhanced hydrogen production using palm kernel shell. International Journal of Hydrogen Energy, 39 (7). pp. 3286-3293.

Khanam, T. and Rashedi, A. and Chowdhury, S. and Asundi, A.K. (2014) Comparison of image processing methods for the detection of particle from digital hologram. Applied Mechanics and Materials, 625. pp. 444-447.

Khor, C.S. and Chachuat, B. and Shah, N. (2014) Fixed-flowrate total water network synthesis under uncertainty with risk management. Journal of Cleaner Production, 77. pp. 79-93.

Khor, C.S. and Chachuat, B. and Shah, N. (2014) Optimization of water network synthesis for single-site and continuous processes: Milestones, challenges, and future directions. Industrial and Engineering Chemistry Research, 53 (25). pp. 10257-10275.

Khor, C.S. and Lee, T.F. and Nhlapo, D. and Lau, K.K. (2014) Optimal synthesis of ethylene production process. Chemical Engineering Transactions, 39 (Specia). pp. 1585-1590.

Kim, D.K. and Kim, H.B. and Zhang, X. and Li, C.G. and Paik, J.K. (2014) Ultimate strength performance of tankers associated with industry corrosion addition practices. International Journal of Naval Architecture and Ocean Engineering, 6 (3). pp. 507-528.

Kim, D.K. and Liew, M.S. and Youssef, S.A.M. and Mohd, M.H. and Kim, H.B. and Paik, J.K. (2014) Time-Dependent Ultimate Strength Performance of Corroded FPSOs. Arabian Journal for Science and Engineering, 39 (11). pp. 7673-7690.

Kim, D.K. and Paik, J.K. (2014) Ultimate strength performance of tankers with various corrosion additions. Naval Architect (JUL-AU). pp. 54-56.

Konda, R.E. and Sulaiman, S.A. and Ariwahjoedi, B. (2014) Design and Development of Laboratory Scale Updraft Gasifier for Gasification of Oil Palm Fronds. Asian Journal of Scientific Research, 7 (3). pp. 341-353.

Krishnan, V. and Uemura, Y. and Yusup, S. and Osman, N. (2014) Aspects of carbon dioxide mitigation by Nannochloropsis oculata cultured in a photobioreactor. Applied Mechanics and Materials, 625. pp. 775-779.

Ku Shaari, K.Z. and Hassan, L.H. and Man, Z. (2014) Optimization of coating thickness in a tangential fluidized bed. Applied Mechanics and Materials, 625. pp. 131-135.

Kumar, A. and Hegde, G. and Manaf, S.A.B.A. and Ngaini, Z. and Sharma, K.V. (2014) Catalyst free silica templated porous carbon nanoparticles from bio-waste materials. Chemical Communications, 50 (84). pp. 12702-12705.

Kurian, V.J. and Sebastian, A.A. and Al-Yacouby, A.M. and Liew, M.S. and Idichandy, V.G. (2014) Wave forces on linear arrays of rigid vertical circular cylinders in regular waves. Research Journal of Applied Sciences, Engineering and Technology, 7 (24). pp. 5249-5257.

Kurian, V.J. and Voon, M.C. and Wahab, M.M.A. and Liew, M.S. (2014) System reliability assessment of existing jacket platforms in Malaysian waters. Research Journal of Applied Sciences, Engineering and Technology, 8 (23). pp. 2305-2314.

Kutty, S.R.M. and Isa, M.H. and Nasiru, A. and Salihi, I.U. and Ezerie, H. (2014) Potential of the compact extended aeration reactor (CEAR) as an integrated system to biologically degrade municipal sewage according to Malaysian regulatory limits: Design, process and performance. WIT Transactions on Ecology and the Environment, 186. pp. 269-279.

Lai, C.-Y. and Zakaria, N. (2014) Towards an intelligent framework for pressure-based 3D curve drawing. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8698 L. pp. 63-72.

Lai, L.S. and Yeong, Y.F. and Ani, N.C. and Lau, K.K. and Shariff, A.M. (2014) Effect of synthesis parameters on the formation of zeolitic imidazolate framework 8 (ZIF-8) nanoparticles for CO2 adsorption. Particulate Science and Technology, 32 (5). pp. 520-528.

Lai, L.S. and Yeong, Y.F. and Keong Lau, K. and Azmi, M.S. (2014) Zeolitic Imidazolate Frameworks (ZIF): A Potential Membrane for CO2/CH4 Separation. Separation Science and Technology (Philadelphia), 49 (10). pp. 1490-1508.

Lai, L.S. and Yin Fong, Y. and Che Ani, N. and Kok Keong, L. and Azmi, M.S. (2014) Effect of the solvent molar ratios on the synthesis of zeolitic imidazolate framework 8 (ZIF-8) and its performance in CO2 adsorption. Applied Mechanics and Materials, 625. pp. 69-72.

Lai Fui, B.C. and Yusup, S. and Shoaibi, A.A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Kinetic analysis on catalytic co-gasification of rubber seed shell and high density polyethylene mixtures. Applied Mechanics and Materials, 625. pp. 251-254.

Lakshmanan, S. and Murugesan, T. (2014) Adsorption of chlorate from chlor-alkali plant purged brine stream. Applied Mechanics and Materials, 625. pp. 885-888.

Lal, B. (2014) Hydration behavior study of imidazolium based ILs in water. Applied Mechanics and Materials, 625. pp. 553-556.

Lam, M.K. and Lee, K.T. (2014) Cultivation of Chlorella vulgaris in a pilot-scale sequential-baffled column photobioreactor for biomass and biodiesel production. Energy Conversion and Management, 88. pp. 399-410.

Laude, Augustinus and Ganesan, Karthikeyan and Acharya, Rajendra and Chua, Chua K and Ng, Eddie Y and Tang, Tong Boon (2014) Computer-aided analysis of diabetic retinopathy using trace transform functionals and optimization of data training-testing sizes. Investigative Ophthalmology & Visual Science, 55 (13). p. 4823.

Lawal, D.U. and Matori, A.-N. and Yusof, K.W. and Hashim, A.M. and Aminu, M. and Sabri, S. and Balogun, A.-L. and Chandio, I.A. and Mokhtar, M.R.M. (2014) group-based decision support for flood hazard forecasting: A geospatial technology-based group analytic hierarchy process approach. Research Journal of Applied Sciences, Engineering and Technology, 7 (23). pp. 4838-4850.

Lee, K. and Akmal Saipolbahri, Z. and Hoe Guan, B. and Soleimani, H. (2014) Organic sol-gel method in the synthesis and characterization of zinc oxide nanoparticles. American Journal of Applied Sciences, 11 (6). pp. 959-962.

Lee, K. and Saipolbahri, Z.A. and Guan, B.H. and Soleimani, H. (2014) Organic sol-gel method in the synthesis and characterization of zinc oxide nanoparticles. American Journal of Applied Sciences, 11 (8). pp. 1250-1254.

Lee, K. and Weis, M. and Chen, X. and Taguchi, D. and Manaka, T. and Iwamoto, M. (2014) Metal nanoparticles in organic field-effect transistor: Transition from charge trapping to conduction mechanism. Thin Solid Films, 554. pp. 189-193.

Lee, S.-P. and Ramli, A. and Kutty, M.G. and Hamid, S.B.A. (2014) Incorporation of Pd nanoparticles on rod and necklace-like SBA-15 supports materials. Advanced Materials Research, 917. pp. 10-17.

Lee, Y.T. and Chowdhury, S. and Bustam, M.A. and Mutalib, M.I.A. and Norani, M.M. (2014) Morphology controlled ionothermal synthesis and characterization of ceria nanomaterials. Advanced Materials Research, 1024. pp. 112-115.

Lethesh, K.C. and Binti Hasnan, N.H. and Mutalib, M.I.A. (2014) Extractive desulphurization of model oil using sulphonium based ionic liquids. Applied Mechanics and Materials, 625. pp. 205-208.

Lethesh, K.C. and Shah, S.N. and Mutalib, M.I.A. (2014) Synthesis, characterization, and thermophysical properties of 1,8-diazobicyclo5.4.0undec-7-ene based thiocyanate ionic liquids. Journal of Chemical and Engineering Data, 59 (6). pp. 1788-1795.

Lias, M.R. and Awang, M. and Rao, T.V.V.L.N. and Fadhil, M. (2014) Evaluation of spur gear pair on tooth root bending stress in yawing misalignment contactcondition. Advanced Materials Research, 980. pp. 97-101.

Liew, M. S. and Wan Abdullah Zawawi, Noor Amila and Hashim, F.M. (2014) Raising the Skills Bar for Deep Water. Marine Technology.

Liew, Mohd Shahir and Zawawi, Noor Amila and Hashim, F.M. (2014) Raising the Skills Bar for Deep Water. Raising the Skills Bar for Deep Water.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. (2014) Mathematical modeling of the radial crossflow hollow fiber membrane module for multi-component gas separation. Applied Mechanics and Materials, 625. pp. 726-729.

Lok, C.C. and Yin Fong, Y. (2014) Synthesis and characterization of ZIF-8 mixed matrix membranes. Applied Mechanics and Materials, 625. pp. 661-664.

Loong, Y.C. and Yusup, S. and Uemura, Y. (2014) Delignification of empty fruit bunch (EFB) using low transition temperature mixtures (LTTMs): A review. Applied Mechanics and Materials, 625. pp. 741-744.

Magzoub, M.A. and Saad, N.B. and Ibrahim, R.B. (2014) Simulation of a ball on a beam model using a fuzzy-dynamic and a fuzzy-static sliding-mode controller. Research Journal of Applied Sciences, Engineering and Technology, 8 (2). pp. 288-295.

Magzoub, M.A. and Saad, N.B. and Ibrahim, R.B. (2014) Study and analysis of power system stabiliser performance using artificial neural network. Applied Mechanics and Materials, 575. pp. 605-609.

Majeed, Z. and Ramli, N.K. and Mansor, N. and Man, Z. (2014) Starch biodegradation in a lignin modified slow release fertilizer: Effect of thickness. Applied Mechanics and Materials, 625. pp. 830-833.

Majid, N.D.A. and Shariff, A.M. and Thiam, E.S.B. (2014) Compliance audit model for managing process safety in process industries. Applied Mechanics and Materials, 625. pp. 406-409.

Majid, N.D.A. and Shariff, A.M. and Zaki, N.A.M. (2014) Compliance of hot work permit to process safety management (PSM) regulation. Applied Mechanics and Materials, 625. pp. 418-421.

Man, Z. and Sarwono, A. and Bustam, M.A. and Azizli, K.A.M. (2014) Starch based soil conditioner and slow release system. Applied Mechanics and Materials, 625. pp. 877-880.

Manikya Kanti, K. and Srinivasa Rao, P. and Ranga Janardhana, G. and Rani, A.M.A. (2014) Mathematical modeling for the prediction of depth of penetration in double pulse GMA welding using fractional factorial method. Applied Mechanics and Materials, 660. pp. 347-351.

Manoj Mathew, David Menier, Abdul Hadi Abdul Rahman, Manuel Pube, . (2014) Tectonic and eustatic controls on Miocene sedimentation of Nyalau Formation (Sarawak, Borneo). Tectonic and eustatic controls on Miocene sedimentation of Nyalau Formation (Sarawak, Borneo).

Mansor, M.Y. and Rahman, A.H.A. and Menier, D. and Pubellier, M. (2014) Structural evolution of Malay Basin, its link to sunda block tectonics. Marine and Petroleum Geology, 58 (PB). pp. 736-748.

Maqsood, K. and Ali, A.H. and Shariff, A.B.M. and Ganguly, S. (2014) Techno-economic evaluation of cryogenic networks for separation of CO2 from natural gas. Applied Mechanics and Materials, 625. pp. 635-638.

Maqsood, K. and Mullick, A. and Ali, A. and Kargupta, K. and Ganguly, S. (2014) Cryogenic carbon dioxide separation from natural gas: A review based on conventional and novel emerging technologies. Reviews in Chemical Engineering, 30 (5). pp. 453-477.

Maszelan, C.N.H.C. and Buang, A. (2014) Monoethanolamine (MEA) wastewater treatment using Photo-Fenton oxidation. Applied Mechanics and Materials, 625. pp. 792-795.

Matsumura, Y. and Fukutomi, Y. and Uemura, Y. (2014) Comparative study of hydrothermal pretreatment of eucalyptus and oil palm empty fruit bunch for ethanol fermentation. Journal of the Japan Petroleum Institute, 57 (4). pp. 164-170.

Mazlan, M.A.F. and Uemura, Y. and Osman, N. and Yusup, S. (2014) Review on pyrolysis of hardwood residue to Biofuel. Applied Mechanics and Materials, 625. pp. 714-717.

Md Akhir, M.K. and Othman, M. and Suleiman, M. and Majid, Z.A. and Sulaiman, J. and Muthuvalu, M.S. and Aruchuan, E. (2014) QSMSOR iterative method for the solution of 2D homogeneous Helmholtz equations. International Journal of Mathematical Analysis, 8 (49-52). pp. 2493-2505.

Md Nurul, S. and Azmi Bustam, M. and Yunus, M.N. and Man, Z. (2014) Solid supported hmimTf2N for CO2 adsorption. Advanced Materials Research, 879. pp. 149-154.

Md. Saaid, I. and Mahat, S.Q.A. and Lal, B. and Mutalib, M.I.A. and Sabil, K.M. (2014) Experimental investigation on the effectiveness of 1-butyl-3- methylimidazolium perchlorate ionic liquid as a reducing agent for heavy oil upgrading. Industrial and Engineering Chemistry Research, 53 (19). pp. 8279-8284.

Mellon, N. and Shariff, A.M. (2014) Effect of superficial gas velocity on the separation efficiency of inline horizontal swirl tube separator. Applied Mechanics and Materials, 625. pp. 566-569.

Memon, M.A. and Salleh, R. and Rosli Baharom, M.N. and Harun, H. (2014) Factors influencing the satisfaction of international postgraduate students in the Malaysian context-A literature review and a proposed model. International Education Studies, 7 (11). pp. 76-83.

Mengal, A.N. and Karuppanan, S. and Wahab, A.A. (2014) Basalt carbon hybrid composite for wind turbine rotor blades: A short review. Advanced Materials Research, 970. pp. 67-73.

Menier, D. and Pierson, B. and Chalabi, A. and Ting, K.K. and Pubellier, M. (2014) Morphological indicators of structural control, relative sea-level fluctuations and platform drowning on present-day and Miocene carbonate platforms. Marine and Petroleum Geology, 58 (PB). pp. 776-788.

Mirza, A. and Hamid, N.H. and Khir, M.H.M. and Dennis, J.O. and Ashraf, K. and Shoaib, M. and Jan, M.T. (2014) A CMOS-MEMS cantilever sensor for capnometric applications. IEICE Electronics Express, 11 (9).

Moghadam, R.A. and Yusup, S. and Uemura, Y. and Chin, B.L.F. and Lam, H.L. and Al Shoaibi, A. (2014) Syngas production from palm kernel shell and polyethylene waste blend in fluidized bed catalytic steam co-gasification process. Energy, 75. pp. 40-44.

Mohamed, M. and Yusup, S. and Wahyudiono and Machmudah, S. and Goto, M. (2014) Effect of temperature on the extraction of bio-oil from oil palm mesocarp fiber using supercritical CO2. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 39-42.

Mohamed, N.F. and Mutalib, M.I.A. and B.Bustam, M.A. and Leveque, J.-M. and El Harbawi, M. (2014) Ecotoxicity of pyridinium based ionic liquids: A review. Applied Mechanics and Materials, 625. pp. 152-155.

Mohamed Ramli, N. and Hussain, M.A. and Mohamed Jan, B. and Abdullah, B. (2014) Composition Prediction of a Debutanizer Column using Equation Based Artificial Neural Network Model. Neurocomputing, 131. pp. 59-76.

Mohammadat, Mohamed Tag Elsir and Zain Ali , Noohul Basheer and Hussin, Fawnizu Azmadi and Zwolinski, Mark (2014) Multivoltage Aware Resistive Open Fault Model. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 22 (2). pp. 220-231. ISSN 1063-8210

Mohammadpour, E. and Awang, M. (2014) Investigation of carbon nanotube defects on its strength using nonlinear finite element modeling. Advanced Structured Materials, 54. pp. 383-390.

Mohammed, B.S. and Abdullahi, M. and Hoong, C.K. (2014) Statistical models for concrete containing wood chipping as partial replacement to fine aggregate. Construction and Building Materials, 55. pp. 13-19.

Mohammed, B.S. and Azmi, N.J. (2014) Strength reduction factors for structural rubbercrete. Frontiers of Structural and Civil Engineering, 8 (3). pp. 270-281.

Mohammed, B.S. and Ibrahim, R.B. and Perumal, N. and Rama Rao, K.S. (2014) Comparison of multi-carriers based PWM for multilevel converters. International Review on Modelling and Simulations, 7 (3). pp. 363-378.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2014) Estimation of counterweight for shaking force balancing of a crank-rocker mechanism. Applied Mechanics and Materials, 663. pp. 135-140.

Mohd Hashim, F.M. and Ahmad, M.F.A. (2014) Determination of nozzle angle for flow performance in supersonic subsea compact wet gas separator. Advanced Materials Research, 980. pp. 117-121.

Mohd Noor, N.I. and Eldemerdash, U.U.M.N. and Shariff, A.M. (2014) Modification of adsorbents for high CO2 content capture from stranded natural gas reserve: A critical review. Advanced Materials Research, 917. pp. 342-349.

Mohd Shah, M.S.B. and Periyasamy, B. (2014) Binary cracking kinetics for thermal cracking of vacuum residues in Eureka process. Fuel, 134. pp. 618-627.

Mohd Zabidi, N.A. and Pilus, R. and Rahman, S. and Ali, S. (2014) Characterisation of Co/Mn catalysts synthesised via reverse microemulsion method. Materials Research Innovations, 18. S6-477-S6-479.

Mohd Zain, A. and Shaaban, M.G. and Mahmud, H. (2014) Leachability of solidified petroleum sludge. Advanced Materials Research, 917. pp. 123-133.

Mohmmed, A. O and Al-Kayiem , H. H. and Nasif, M. S. and Mohammed, Z. I (2014) Finite Element Analysis of Fatigue in Pipelines Due To Slug Flow. Advanced Materials Research, 845. pp. 271-276.

Mohshim, D.F. and Mukhtar, H. and Man, Z. (2014) Effects of ionic liquid blending in polymeric membrane: Physical properties and performance evaluation. Applied Mechanics and Materials, 625. pp. 680-684.

Mohshim, D.F. and Mukhtar, H. and Man, Z. (2014) The effect of incorporating ionic liquid into polyethersulfone-SAPO34 based mixed matrix membrane on CO2 gas separation performance. Separation and Purification Technology, 135. pp. 252-258.

Moniruzzaman, M. and Nao, Y. and Bhattacharjee, S. and Ono, T. (2014) Laccase incorporated into PEG-PLA polymer as active and stable biocatalyst for ionic liquids media. Applied Mechanics and Materials, 625. pp. 333-336.

Montasir, O.A. and Yenduri, A. and Kurian, V.J. (2014) Effect of mooring line properties and fairlead slopes on the restoring behavior of offshore mooring system. Research Journal of Applied Sciences, Engineering and Technology, 8 (3). pp. 346-353.

Moradi, B. and Awang, M. and Bashir, A. and Sabil, K.M. (2014) Effects of alcohols on interfacial tension between carbon dioxide and crude oil at elevated pressures and temperature. Journal of Petroleum Science and Engineering, 121. pp. 103-109.

Mturi, G.A.J. and O'Connell, J. and Zoorob, S.E. and De Beer, M. (2014) A study of crumb rubber modified bitumen used in South Africa. Road Materials and Pavement Design, 15 (4). pp. 774-790.

Mubashir, M. and Fong, Y.Y. and Keong, L.K. and Bin Sharrif, M.A. (2014) Synthesis and performance of deca-dodecasil 3 rhombohedral (DDR)-type zeolite membrane in co2 separation�a review. ASEAN Journal of Chemical Engineering, 14 (2). pp. 48-57.

Muhammad, A. and Pendyala, R. and Rahmanian, N. (2014) CFD simulation of droplet formation under various parameters in prilling process. Applied Mechanics and Materials, 625. pp. 394-397.

Muhammad, N. and Man, Z. and Elsheikh, Y.A. and Bustam, M.A. and Mutalib, M.I.A. (2014) Synthesis and thermophysical properties of imidazolium-based bronsted acidic ionic liquids. Journal of Chemical and Engineering Data, 59 (3). pp. 579-584.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Megat Yusoff, P.S.M. and Raza, M.R. (2014) Homogeneous distribution of carbon nanotubes in copper matrix nanocomposites fabricated via combined technique. Nanoscience and Nanotechnology Letters, 6 (10). pp. 865-874.

Mulubrhan, F. and Mokhtar, A.A. and Muhammad, M. (2014) Integrating reliability analysis in life cycle cost estimation of heat exchanger and pump. Advanced Materials Research, 903. pp. 408-413.

Muniandy, M.A.P. and Sulaiman, S. (2014) An exploratory study on blind users' mental model in computer accessibility. ARPN Journal of Engineering and Applied Sciences, 9 (7). pp. 1005-1011.

Munir, S. and Heikal, M.R. and Rashid, A. and Aziz, A. and Muthuvalu, M.S. and Jaafar, A. and Israr, M. (2014) Dynamical analysis of turbulent liquid phase in two-phase pipe flow. ScienceAsia, 40. pp. 63-68.

Murshid, G. and Shariff, A.M. and Bustam, M.A. and Ullah, S. (2014) Solubility of Co2 in piperazine (PZ) activated aqueous solutions of 2- amino-2-methyl-1-propanol (AMP) at elevated pressures. Applied Mechanics and Materials, 625. pp. 233-236.

Murshid, G. and Shariff, A.M. and Keong, L.K. and Azmi Busam, M. (2014) Solubility of carbon dioxide in aqueous solutions of Piperazine (PZ) at elevated pressures. Advanced Materials Research, 917. pp. 144-150.

Murugesan, R. and Dominic, P.D.D. (2014) Socio, economic and psychological determinants of entrepreneurial intentions: A structural equation model. Global Business and Economics Review, 16 (4). pp. 396-415.

Mushtaq, A. and Mukhtar, H. and Shariff, A.M. (2014) Advanced development and characterization of DEA amine-polysulfone/polyvinylacetate blend membranes. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1201-1211.

Mushtaq, A. and Mukhtar, H. and Shariff, A.M. (2014) Gas permeability and selectivity of synthesized diethanol amine-polysulfone/polyvinylacetate blend membranes. Research Journal of Applied Sciences, Engineering and Technology, 8 (5). pp. 600-605.

Mushtaq, A. and Mukhtar, H. and Shariff, A.M. (2014) Gas permeability study of amine-polymer blend membranes to separate carbondioxide from natural gas. Applied Mechanics and Materials, 625. pp. 704-708.

Mushtaq, M. and Isa, M Tan and Nadeem, M. and Devi, Cecilia and Lee, Susan Y. C. and Sagir, M. (2014) A Convenient Route For The Alkoxylation Of Biodiesel And Its Influence On Cold Flow Properties. International Journal of Green Energy, 11 (3). pp. 267-279.

Mushtaq, M. and Tan, I.M. and Nadeem, M. and Devi, C. and Lee, S.Y.C. and Sagir, M. (2014) A convenient route for the alkoxylation of biodiesel and its influence on cold flow properties. International Journal of Green Energy, 11 (3). pp. 267-279.

Mustafa, M.R. and Rezaur, R.B. and Rahardjo, H. and Isa, M.H. (2014) Closure to "Evaluation of MLP-ANN training algorithms for modeling soil pore-water pressure responses to rainfall" by M. R. Mustafa, R. B. Rezaur, S. Saiedi, H. Rahardjo, and M. H. Isa. Journal of Hydrologic Engineering, 19 (6). pp. 1272-1273.

Mustaffa, Z.B. and Albarody, T.M.B. (2014) Flexible thermosetting pipe. Advanced Materials Research, 983. pp. 444-449.

Nadeem, S. and Ahmed, I. and Abdul Muttalib, I. and Tufail, M. and Khan, M.S. (2014) Citric acid future prospects for Pakistan, a short review. Applied Mechanics and Materials, 625. pp. 61-64.

Naqvi, S.R. and Uemura, Y. and Osman, N.B. and Yusup, S. and Nuruddin, M.F. (2014) Physiochemical properties of pyrolysis oil derived from fast pyrolysis of wet and dried rice husk in a free fall reactor. Applied Mechanics and Materials, 625. pp. 604-607.

Narahari, M. and Debnath, L. (2014) Some new convolution properties and inversion formulas of Laplace transforms. Integral Transforms and Special Functions, 25 (5). pp. 412-422.

Narayanan, S.P. and Mathews, M.S. (2014) Roofing sheets systems for industrial sheds for different wind zones based on static load testing. Malaysian Construction Research Journal, 14 (1). pp. 79-96.

Narayanan, S.P. and Mathews, M.S. (2014) Roofing sheets systems for industrial sheds in cyclone prone areas based on dynamic testing. Malaysian Construction Research Journal, 14 (1). pp. 63-78.

Nashed, O. and Sabil, K.M. and Lal, B. and Ismail, L. and Jaafar, A.J. (2014) Study of 1-(2-hydroxyethyle) 3-methylimidazolium halide as thermodynamic inhibitors. Applied Mechanics and Materials, 625. pp. 337-340.

Nasir, Q. and Lau, K.K. and Lal, B. and Sabil, K.M. (2014) Hydrate dissociation condition measurement of CO2-rich mixed gas in the presence of methanol/ethylene glycol and mixed methanol/ethylene glycol + electrolyte aqueous solution. Journal of Chemical and Engineering Data, 59 (11). pp. 3920-3926.

Nasir, Q. and Sabil, K.M. and Partoon, B. (2014) CO2 rich gas mixture hydrate-liquid water- vapor (H-Lw-V) equilibrium measurement and prediction. Applied Mechanics and Materials, 625. pp. 386-389.

Nasir, R. and Mukhtar, H. and Man, Z. (2014) Fabrication and characterization of facilitated transport membrane for gas separation. Applied Mechanics and Materials, 625. pp. 533-536.

Nasir, R. and Mukhtar, H. and Man, Z. and Bt. Shaharun, M.S. and Abu Bakar, M.Z. (2014) Performance enhancement of mixed matrix membranes through the incorporation of alkanolamines for CO2/CH4 separation. ASEAN Journal of Chemical Engineering, 14 (2). pp. 28-37.

Nawaz, F. and Jeoti, V. (2014) SAW sensor read range limitations and perspectives. Wireless Networks, 20 (8). pp. 2581-2587.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Rehman, N.U. (2014) Development of simple designs of multitip probe diagnostic systems for RF plasma characterization. The Scientific World Journal, 2014.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Shakir, I. and Ullah, S. and Sagir, M. (2014) Testing of nickel-chrome alloy as a tip material for multi-tip langmuir probes. Surface Review and Letters, 21 (4).

Naz, M.Y. and Sulaiman, S.A. (2014) Surface Morphology and Dissolution Rate of Slow Discharge Urea Coated with Starch-Urea-Borax Matrix. Polymer - Plastics Technology and Engineering, 53 (17). pp. 1778-1787.

Naz, M.Y. and Sulaiman, S.A. (2014) Testing of starch-based carbohydrate polymer coatings for enhanced urea performance. Journal of Coatings Technology and Research, 11 (5). pp. 747-756.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2014) Study of primary atomisation phenomenon of modified starch solution stream at elevated temperature. Materials Research Innovations, 18. S6-135-S6-139.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2014) Visual Characterization of Airless Water Spray Jet Breakup and Vortex Clouds Formation at Elevated Temperature and Pressure. Arabian Journal for Science and Engineering, 39 (10). pp. 7241-7250.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Shaari, K.Z.K. (2014) Characterization of modified tapioca starch solutions and their sprays for high temperature coating applications. The Scientific World Journal, 2014.

Ng, W.P.Q. and Lam, H.L. and Yusup, S. (2014) Waste-to-wealth: Energy pack as an integrated biofuel. Chemical Engineering Transactions, 39 (Specia). pp. 925-930.

Nguyen Van, T.D. and Sufian, S. and Mansor, N. and Yahya, N. (2014) Characterization of carbon nanofibers treated with thermal nitrogen as a catalyst support using point-of-zero charge analysis. Journal of Nanomaterials, 2014.

Nguyen Van, T.D. and Sufian, S. and Mansor, N. and Yahya, N. (2014) Effect of modification techniques on surface of carbon nanofiber as catalyst support. Applied Mechanics and Materials, 625. pp. 345-348.

Niaz Akhtar, M. and Nasir, N. and Kashif, M. and Yahya, N. and Ahmad, M. and Murtaza, G. and Azhar Khan, M. and Asif, M.H. and Sattar, A. and Raza, R. and Saleem, M. and Khan, S.N. (2014) Mn0.8Zn0.2Fe2O4 nanoparticulates spinel ferrites: An approach to enhance the antenna field strength for improved magnitude versus offset (MVO). Progress in Natural Science: Materials International, 24 (4). pp. 364-372.

Nizamani, Z. and Kurian, V.J. and Liew, M.S. (2014) Determination of environmental load factors for ISO 19902 code in offshore Malaysia using FORM structural reliability method. Ocean Engineering, 92. pp. 31-43.

Noor, N.D.M. and Hashim, A.M. (2014) Hydraulic stability of interlocking concrete unit-V (ICU-V). Applied Mechanics and Materials, 606. pp. 211-215.

Norbert Simon, Rodeano Roslee, Nightingle Lian Marto, Juhari Mat, . (2014) Lineaments and their association with landslide occurrences along the Ranau-Tambunan road, Sabah. Lineaments and their association with landslide occurrences along the Ranau-Tambunan road, Sabah.

Norizan, A. and Uemura, Y. and Afif, H.A. and Osman, N. and Omar, W.N. and Abdullah, B. and Tsutsui, T. (2014) Fast pyrolysis of oil palm kernel shell in a fluidized bed reactor: The effect of pyrolysis temperature on the yields of pyrolysis products. Applied Mechanics and Materials, 625. pp. 616-619.

Norizan, A. and Uemura, Y. and Wissam, N.O. and Tsutsui, T. (2014) Bio-oil derived from palm kernel shell in fluidized bed reactor: Effect of particle size. Advanced Materials Research, 917. pp. 63-71.

Nugraheni, R.D. and Chow, W.S. and Abdul Hadi, A.R. and Siti Nuralia, M.N. and Abdullah, M.F. (2014) Tertiary coal-bearing heterolithic packages as low permeability reservoir rocks in the Balingian Sub-basin, Sarawak, Malaysia. Bulletin of the Geological Society of Malaysia, 60. pp. 85-93.

Nuruddin, M.F. and Azme, N.M. and Chang, K.Y. (2014) Utilization of microwave incinerated rice husk ash (MIRHA) in ductile self-compacting concrete. WIT Transactions on Ecology and the Environment, 191. pp. 1301-1312.

Nuruddin, M.F. and Chang, K.Y. and Azmee, N.M. (2014) Workability and compressive strength of ductile self compacting concrete (DSCC) with various cement replacement materials. Construction and Building Materials, 55. pp. 153-157.

Oh, P.C. and Mansur, N.A. (2014) Effects of aluminosilicate mineral nano-clay fillers on polysulfone mixed matrix membrane for carbon dioxide removal. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 23-27.

Osman, N.B. and Uemura, Y. and Afif, H. and Aljuboori, A.H.R. (2014) Pyrolyzed waste engine oil properties by microwave-induced reactor. Applied Mechanics and Materials, 625. pp. 673-676.

Osman, S.B.S. and Fikri, M.N. and Siddique, F.I. (2014) Correlation of electrical resistivity with some soil parameters for the development of possible prediction of slope stability and bearing capacity of soil using electrical parameters. Pertanika Journal of Science and Technology, 22 (1). pp. 139-152.

Ousta, F. and Kamel, N. and Yusoff, M.Z. and Ali, S. (2014) Mapping QoS classes in loose coupling heterogeneous networks. Research Journal of Applied Sciences, Engineering and Technology, 8 (16). pp. 1777-1780.

Ousta, F. and Yusoff, M.Z. and Kamel, N. and Ali, S. (2014) QoS evolution in 3GPP mobile networks. Research Journal of Applied Sciences, Engineering and Technology, 8 (2). pp. 153-159.

Park, D.K. and Paik, J.K. and Kim, B.J. and Seo, J.K. and Li, C.G. and Kim, D.K. (2014) Ultimate strength performance of Northern sea going non-ice class commercial ships. Structural Engineering and Mechanics, 52 (3). pp. 613-632.

Partoon, B. and Sabil, K.M. and Kok Keong, L. (2014) Impact of gas phase composition on gas hydrate process for carbon dioxide capturing from gaseous mixtures. Applied Mechanics and Materials, 625. pp. 557-561.

Pau, J.S. and Pao, W.K.S. and Yong, S.P. and Memon, P.Q. (2014) Capillary pressure and buoyancy effects in the CO2/brine flow system. WIT Transactions on Ecology and the Environment, 186. pp. 613-624.

Paul, T. and Seal, M. and Banerjee, D. and Ganguly, S. and Kargupta, K. and Sandilya, P. (2014) Analysis of drying and dilution in phosphoric acid fuel cell (PAFC) using galvanometric study and electrochemical impedance spectroscopy. Journal of Fuel Cell Science and Technology, 11 (4).

Pauzi, A.H. and Ismail, L. and Siyal, A.A. and Man, Z. and Azizli, K.A. (2014) Experimental study of geopolymer solidification kinetics. Applied Mechanics and Materials, 625. pp. 127-130.

Peyvandi, S. and Ahmad, R. and Nordin Zakaria, M. (2014) Scoring model for availability of volatile hosts in volunteer computing environment. Journal of Theoretical and Applied Information Technology, 70 (2). pp. 293-301.

Pham, H.H.P.L. and Rusli, R. and Abdullah, M.Z. (2014) Consequence study of pressurized CO2 release containing impurities with obstacles. Applied Mechanics and Materials, 625. pp. 474-477.

Pichot, T. and Delescluse, M. and Chamot-Rooke, N. and Pubellier, M. and Qiu, Y. and Meresse, F. and Sun, G. and Savva, D. and Wong, K.P. and Watremez, L. and Auxiètre, J.-L. (2014) Deep crustal structure of the conjugate margins of the SW South China Sea from wide-angle refraction seismic data. Marine and Petroleum Geology, 58 (PB). pp. 627-643.

Ponnusamy, V. and Low, T.J. and Amin, A.H.M. (2014) Biologically inspired mobile agent-based sensor network (BIMAS). International Journal of Mobile Communications, 12 (5). pp. 449-476.

Prabaningrum, N. and Bin Ismail, L. and Subbarao, D. (2014) Reaction kinetics of in-situ methanolysis of Jatropha curcas seeds. Applied Mechanics and Materials, 625. pp. 306-310.

Prabaningrum, N. and Ismail, L.B. and Subbarao, D. (2014) In-situ methanolysis of Jatropha curcas seeds in Soxhlet extractor. Advanced Materials Research, 917. pp. 72-79.

Prajapati, Srichand and Ghosh, Deva (2014) A Simple and Fast Algorithm to Estimate Effective Anisotropy Parameters. 76th EAGE Conference & Exhibition 2014.

Prajapati, Srichand and Ghosh, Deva Prasad and Wan Yusoff, Wan Ismail (2014) Optimization driven model space approach for gas cloud using full waveform inversion. international petroleum technology conference.

Prajapati, Srichand and Ghosh, Deva Prasad and Wan Yusoff, Wan Ismail (2014) Optimization Driven Model-Space Approach for Gas Clouds Using Full Waveform Inversion. IPTC.

Pubellier, M. and Morley, C.K. (2014) The basins of Sundaland (SE Asia): Evolution and boundary conditions. Marine and Petroleum Geology, 58 (PB). pp. 555-578.

Qasim, A. and Zamri Abdullah, M. and Lau, K.K. and Adilla, N. (2014) Flow dynamics investigation of CO2/CH4 gas mixture through porous media using computational approach. Applied Mechanics and Materials, 625. pp. 369-372.

Rafiq, S. and Maulud, A.S. and Man, Z.B. and Muhammad, N. (2014) Gas permeation models in mixed matrix membranes for gas separation. Advanced Materials Research, 917. pp. 317-324.

Rahim, M. and Ramasamy, M. and Tufa, L.D. and Faisal, A. (2014) Isolation of interacting channels in decentralized control systems using instrumental variables method. Applied Mechanics and Materials, 625. pp. 435-438.

Rahmah, A.U. and Harimurti, S. and Omar, A.A. and Murugesan, T. (2014) Degradation kinetic of oxytetracycline antibiotic inside uv reactor in the presence of H2O2. Applied Mechanics and Materials, 625. pp. 901-906.

Rahmam, S. and Mohamed, N.M. and Sufian, S. (2014) Effect of acid treatment on the multiwalled carbon nanotubes. Materials Research Innovations, 18. S6-196-S6-199.

Rahman, A.H.A. and Abdullah, B. and Vo, D.-V.N. (2014) Modelling of carbon dioxide leakage in abandon wells using computational fluid dynamics. Applied Mechanics and Materials, 625. pp. 780-783.

Rahman, I. and Vasant, P.M. and Singh, B.S.M. and Abdullah-Al-Wadud, M. (2014) Optimisation of PHEV/EV charging infrastructures: A review. International Journal of Energy Technology and Policy, 10 (3-4). pp. 280-296.

Rahman, S.A. and Syed, Z.I. and John, K.V. and Liew, M.S. (2014) Structural response of offshore blast walls under accidental explosion. Advanced Materials Research, 1043. pp. 278-282.

Rahmiati, T. and Azizli, K.A. and Man, Z. and Ismail, L. and Nuruddin, M.F. (2014) The effect of KOH concentration on setting time and compressive strength of fly ash-based geopolymer. Applied Mechanics and Materials, 625. pp. 94-97.

Ramli, A. and Ahmed, S. and Yusup, S. (2014) Adsorption behaviour of Si-MCM-41 for CO2: Effect of pressure and temperature on adsorption. Chemical Engineering Transactions, 39 (Specia). pp. 271-276.

Ramli, N.K. and Majeed, Z. and Shuib, A.S. and Mansor, N. and Man, Z. (2014) The potential of thiosulfinates in garlic extract as urease Bioinhibitor. Applied Mechanics and Materials, 625. pp. 796-799.

Ramli, N.K. and Majeed, Z. and Shuib, A.S. and Mansor, N. and Man, Z.B. (2014) The potential of quercetin in Psidium Guajava L. leaves extract as bioinhibitor for controlled released fertilizer. Advanced Materials Research, 970. pp. 16-19.

Ramli, R.M. and Kait, C.F. and Omar, A.A. (2014) Photocatalytic degradation of diisopropanolamine in heterogeneous photo-fenton system. Advanced Materials Research, 917. pp. 160-167.

Ramli, R.M. and Kait, C.F. and Omar, A.A. (2014) Photodegradation of aqueous diisopropanolamine using Cu/TiO2: Effect of calcination temperature and duration. Applied Mechanics and Materials, 625. pp. 847-850.

Ramli, Raihan Mahirah and Chong, Fai Kait and Omar, Abdul Aziz (2014) Visible-Light Photodegradation of Diisopropanolamine using Bimetallic Cu-Fe/TiO2 photocatalyst. Advanced Materials Research, 845. pp. 421-425. ISSN 1662-8985

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of two-layered film journal bearing with partial slip surface. Advanced Materials Research, 903. pp. 215-220.

Rashid, T. and Kait, C.F. and Murugesan, T. (2014) Conversion of lignocellulose into fermentable sugars using solid acid catalysis � A review. Applied Mechanics and Materials, 625. pp. 341-344.

Rashid, U. and Ahmad, J. and Yunus, R. and Ibrahim, M. and Masood, H. and Syam, A.M. (2014) Momordica Charantia seed oil methyl esters: A kinetic study and fuel properties. International Journal of Green Energy, 11 (7). pp. 727-740.

Rashidi, N.A. and Yusup, S. and Borhan, A. and Loong, L.H. (2014) Experimental and modelling studies of carbon dioxide adsorption by porous biomass derived activated carbon. Clean Technologies and Environmental Policy, 16 (7). pp. 1353-1361.

Ratnam, K.A. and Dominic, P.D.D. (2014) The factors associating the adoption of cloud computing: An enhancement of the healthcare ecosystem in Malaysia. International Journal of Business Information Systems, 16 (4). pp. 462-479.

Riahi, A. and Yusof, K.W. and Isa, M.H. and Mahinder Singh, B.S. and Sapari, N. (2014) Solar stills productivity with different arrangements of PV-DC heater and sand layer in still basin: A comparative investigation. Research Journal of Applied Sciences, Engineering and Technology, 8 (11). pp. 1363-1372.

Riaz, N. and Bustam, M.A. and Chong, F.K. and Man, Z.B. and Khan, M.S. and Shariff, A.M. (2014) Photocatalytic degradation of DIPA using bimetallic cu-ni/tio2 photocatalyst under visible light irradiation. Scientific World Journal, 2014.

Riaz, N. and Bustam, M.A. and Kait, C.F. and Man, Z.B. and Khan, M.S. and Shariff, A.M. and Shimekit, B. and Ullah, S. and Elkhalifah, A.E.I. (2014) Adsorption of AZO dye orange II by supported TiO2: A review. Applied Mechanics and Materials, 625. pp. 770-774.

Riaz, N. and Chong, F.K. and Man, Z.B. and Dutta, B.K. and Ramli, R.M. and Khan, M.S. (2014) Visible light photodegradation of azo dye by Cu/TiO2. Advanced Materials Research, 917. pp. 151-159.

Richard, B. and Bustam, M.A. and Gonfa, G. (2014) Separation of benzene and cyclohexane with mixed solvent using extractive distillation. Applied Mechanics and Materials, 625. pp. 578-581.

Romeli, F.J. and Wilfred, C.D. and Suhaila Shuib, A. (2014) Thermodynamic properties of flufenamic ionic liquids. Applied Mechanics and Materials, 625. pp. 586-591.

Rudra Narsimha Rao, G. and Nand Gopal, E. and Sharma, K.V. (2014) Cost effective solution for energy efficiency in urban water supplies: Developing countries. International Journal of Applied Engineering Research, 9 (18). pp. 4667-4682.

SN Fathiyah Jamaludin, Manuel Pubellier, David Menier, . (2014) Relation of Syn-Depositional Faulting with Carbonate Growth using Miocene Carbonate Platforms of Central Luconia Province, Malaysia. Relation of Syn-Depositional Faulting with Carbonate Growth using Miocene Carbonate Platforms of Central Luconia Province, Malaysia.

Sabet, M. and Soleimani, H. (2014) Electron-beam irradiation of halogen free flame retardant polymers for wire and cable applications. Applied Mechanics and Materials, 625. pp. 29-33.

Sabet, M. and Soleimani, H. and Hassan, A. and Ratnam, C.T. (2014) Electron Beam Irradiation of LDPE Filled with Calcium Carbonate and Metal Hydroxides. Polymer - Plastics Technology and Engineering, 53 (13). pp. 1362-1366.

Sabil, K.M. and Nasir, Q. and Partoon, B. and Seman, A.A. (2014) Measurement of H-LW-V and dissociation enthalpy of carbon dioxide rich synthetic natural gas mixtures. Journal of Chemical and Engineering Data, 59 (11). pp. 3502-3509.

Safdar, R. and Omar, A.A. and Ismail, L.B. and Lal, B. (2014) Solubility of CO2 in an aqueous ammonium based ionic liquid. Applied Mechanics and Materials, 625. pp. 549-552.

Sagir, M. and Tan, I.M. and Mushtaq, M. and Nadeem, M. (2014) CO2 Mobility and CO2/Brine Interfacial Tension Reduction by Using a New Surfactant for EOR Applications. Journal of Dispersion Science and Technology, 35 (11). pp. 1512-1519.

Saha, S. and Basak, V. and Dasgupta, A. and Ganguly, S. and Banerjee, D. and Kargupta, K. (2014) Graphene supported bimetallic G-Co-Pt nanohybrid catalyst for enhanced and cost effective hydrogen generation. International Journal of Hydrogen Energy, 39 (22). pp. 11566-11577.

Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2014) Breakdown voltage reduction by field emission in multi-walled carbon nanotubes based ionization gas sensor. Applied Physics Letters, 104 (12).

Said, A.M. (2014) Vector-projection approach to curve framing for extruded surfaces. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7971. pp. 596-607.

Saini, S. and Rambli, D.R.B.A. and Zakaria, M.N.B. and Sulaiman, S.B. (2014) A review on particle swarm optimization algorithm and its variants to human motion tracking. Mathematical Problems in Engineering, 2014.

Sajid, M. and Ghosh, D. (2014) Logarithm of short-time Fourier transform for extending the seismic bandwidth. Geophysical Prospecting, 62 (5). pp. 1100-1110.

Sajid, M. and Ghosh, D. (2014) A fast and simple method of spectral enhancement. Geophysics, 79 (3). pp. 75-80.

Sajid, M. and Ghosh, D.P. and Satti, I.A. (2014) Comparative study of new signal processing to improve S/N ratio of seismic data. Journal of Petroleum Exploration and Production Technology, 4 (1). pp. 87-96.

Sajid, Muhammad and Ghosh, Deva (2014) A fast and simple method of spectral enhancement. society of exploration geophysicists.

Sajid, Muhammad and Ghosh, Deva Prasad (2014) Increasing the Robustness of Homomorphic Deconvolution for Non-Stationary Seismic Wavelet. Asian Journal of Earth Sciences. ISSN 1819-1886

Sajid, Muhammad and Ghosh, Deva Prasad and Shahzad, Muhammad (2014) Non-stationary 1-D Thin Bed Model for Non-stationary Frequency Bandwidth Expansion Algorithms. Journal of Applied Sciences. ISSN 18125654

Salam, M.A. and Abdullah, B. and Sufian, S. (2014) Hydrogenated microstructure and its hydrogenation properties: A density functional theory study. Journal of Nanomaterials, 2014.

Salam, M.A. and Sufian, S. (2014) Hydrogen adsorption capacity investigation of Ni-Co-Al mixed oxides. Advanced Materials Research, 917. pp. 360-364.

Saleem, H.M. and Hassan, M.F. and Buhari, S.M. (2014) Router redundancy with enhanced vrrp for intelligent message routing. Advances in Intelligent Systems and Computing, 287. pp. 581-590.

Salihi, I.U. and Kutty, S.R.M. and Isa, M.H. and Aminu, N. and Ezerie, H. (2014) Microwave incinerated sugarcane bagasse ash (MISCBA) as a low cost adsorbent for the removal of zinc in aqueous solution. WIT Transactions on Ecology and the Environment, 186. pp. 281-290.

Salleh, M.Z.M. and Wilfred, C.D. and Abdul Mutalib, M.I. (2014) Desulfurization of fuel using ionic liquids: Computational selection of cation and anion. Applied Mechanics and Materials, 625. pp. 118-122.

Samer, A. and Ali, M. and Basu, P. and Ahmad, F. (2014) Wear resistance of Al-12Si alloys by reinforcing TiC and TiN particles. Journal of Engineering Mechanics, 140 (6).

Samsudin, S.J. and Mansor, N. and Sufian, S. and Man, Z. (2014) Identifying thermal and pH stability of thiols compound in garlic extract. Applied Mechanics and Materials, 625. pp. 57-60.

Samsudin, Y.N. and Zulkefely, N.I.F. and Izhar, S.M.M. and Ku Shaari, K.Z. (2014) Effect of nanofillers on the spreading behavior of biopolymer materials on urea surface. Applied Mechanics and Materials, 625. pp. 907-910.

Sapari, N. and Orji, K.U. and Mohamad Hazli, M.H.B. and Yavari, S. and Olisa, E. and Asadpuor, R. (2014) Engineered wetland for the treatment of wastewater from fertilizer plant. Advanced Materials Research, 1051. pp. 500-504.

Sarkar, A.Kr. and Saha, S. and Ganguly, S. and Banerjee, D. and Kargupta, K. (2014) Hydrogen storage on graphene using Benkeser reaction. International Journal of Energy Research, 38 (14). pp. 1889-1895.

Sarwar, M. and Abd Majid, M.A.B. (2014) Study of weld hardness of pipes at elevated temperature application in power plants. Advanced Materials Research, 1025-1. pp. 310-316.

Satti, Iftikhar Ahmed and Ghosh, Deva Prasad and Wan Yusoff, Wan Ismail (2014) Analysis of Overpressure Mechanism in a Field of Southwestern Malay Basin. Offshore Technology Conference.

Savva, D. and Pubellier, M. and Franke, D. and Chamot-Rooke, N. and Meresse, F. and Steuer, S. and Auxietre, J.L. (2014) Different expressions of rifting on the South China Sea margins. Marine and Petroleum Geology, 58 (PB). pp. 579-598.

See, T.L. and Shariff, A.M. and Kok Keong, L. (2014) Optimization of temperature rise during CO2 absorption process using response surface methodology. Applied Mechanics and Materials, 625. pp. 42-45.

Shabib-asl, A. and Ayoub, M.A. and Alta'ee, A.F. and Saaid, I.B.M. and Valentim, P.P.J. (2014) Comprehensive review of foam application during foam assisted water alternating gas (FAWAG) method. Research Journal of Applied Sciences, Engineering and Technology, 8 (17). pp. 1896-1904.

Shah, S.M.U. and Che Radziah, C. and Ibrahim, S. and Latiff, F. and Othman, M.F. and Abdullah, M.A. (2014) Effects of photoperiod, salinity and pH on cell growth and lipid content of Pavlova lutheri. Annals of Microbiology, 64 (1). pp. 157-164.

Shah, S.N. and Mutalib, M.I.A. and Pilus, R.B.M. and Lethesh, K.C. (2014) Separation of naphthenic acid using hydroxide based ionic liquids. Applied Mechanics and Materials, 625. pp. 570-573.

Shah, Syed and Yusof, K. W and Mustaffa, Zahiraniza and Mustafa, A (2014) Concentration of Total Suspended Solids (TSS) Influenced by the Simulated Rainfall Event on Highway Embankment. IACSIT International Journal of Engineering and Technology, 6 (6). pp. 493-496.

Shahbazi, Aamin and Ghosh, Deva Prasad and Solemani, Mehrdad and Mann, Juergen (2014) Solving the Conflicting Dips Problem in Complex Media by Considering all Possible Dips in CRS Method. IPTC.

Shaheen, Ateeq-Ur-Rehman and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2014) A Review on Structural Software-Based Self- Testing of Embedded Processors. International Review on Computers and Software (IRECOS), 9 (5). ISSN 1828-6011

Shahid, M.Z. and Maulud, A.S. and Bustam, M.A. (2014) Modelling of CO2 loading in DEA by using peak ratio of Raman spectroscopy. Applied Mechanics and Materials, 625. pp. 188-191.

Shahzad, A. and Saad, M.N. and Walter, N. and Malik, A.S. and Meriaudeau, F. (2014) Hyperspectral venous image quality assessment for optimum illumination range selection based on skin tone characteristics. BioMedical Engineering Online, 13 (1).

Shahzad, A. and Saad, M.N.M. and Walter, N. and Malik, A.S. and Meriaudeau, F. (2014) A review on subcutaneous veins localization using imaging techniques. Current Medical Imaging Reviews, 10 (2). pp. 125-133.

Shahzad, B. and Aziz, R. and Said, A.M. (2014) Using wage rate analysis to determine software project scale. Research Journal of Applied Sciences, Engineering and Technology, 8 (2). pp. 221-225.

Shaikh, M.S. and Shariff, A.M. and Bustam, M.A. and Murshid, G. (2014) Physicochemical properties of aqueous solutions of sodium l -prolinate as an absorbent for CO2 removal. Journal of Chemical and Engineering Data, 59 (2). pp. 362-368.

Shaikh, M.S. and Shariff, A.M. and Bustam, M.A. and Murshid, G. (2014) Study of CO2 solubility in aqueous blend of potassium carbonate promoted with glycine. Applied Mechanics and Materials, 625. pp. 19-23.

Shaikh, P.H. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. (2014) Stochastic optimized intelligent controller for smart energy efficient buildings. Sustainable Cities and Society, 13. pp. 41-45.

Shakir, M. and Malik, A.S. and Kamel, N. and Qidwai, U. (2014) Embedded wearable EEG seizure detection in ambulatory state. International Journal of Simulation: Systems, Science and Technology, 15 (3). pp. 1-6.

Shetty, N. and Ramasamy, M. and Pendyala, R. (2014) Effect of bulk temperature on formation of crude oil fouling precursors on heat transfer surfaces. Applied Mechanics and Materials, 625. pp. 482-485.

Shimekit, B. and Shariff, A. and Mukhtar, H. and Bustam, A. and Elkhalifah, A.E.I. and Ullah, S. and Riaz, N. (2014) Interfacial defects on mixed matrix membranes and mitigation techniques for gas separation: A review. Applied Mechanics and Materials, 625. pp. 653-656.

Shuaibu, A.N. and Faye, I. and Malik, A.S. and Simsim, M.T. (2014) Collision avoidance path for pedestrian agent performing tawaf. Lecture Notes in Electrical Engineering, 285 LN. pp. 361-368.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2014) Effect of ferrocene concentration on the quality of multiwalled CNTs grown by floating catalytic chemical vapor deposition technique. Main Group Chemistry, 13 (3). pp. 251-259.

Siraj, K.M. and Yusoff, N. and Shuhaimi, M. and Ali, S.F. (2014) An integrated framework for refinery scheduling and operational optimization. Applied Mechanics and Materials, 625. pp. 390-393.

Siyal, A.A. and Ismail, L. and Man, Z. and Azizli, K.A. (2014) Effect of NaOH and water contents on solidification of sodium silicate free geopolymer. Applied Mechanics and Materials, 625. pp. 3-6.

Sohail, A. and Dominic, D.D. (2014) A unified framework for business process intelligence. Lecture Notes in Electrical Engineering, 285 LN. pp. 437-444.

Soleimani, H. and Latiff, N.R.A. and Yahya, N. and Zaid, H.M. and Sabet, M. and Guan, B.H. and Chuan, L.K. (2014) Effect of annealing temperature on the crystallization of hematite-alumina (Fe2O3-Al2O3 ) nanocomposite and its influence in EOR application. Journal of Nano Research, 29. pp. 105-113.

Soleimani, H. and Yahya, N. and Shameli, K. and Abbas, Z. and Chuan, L.K. and Amighian, J. (2014) S-parameters of bismuth iron garnet (BIG) filled polyvinylidene fluoride composite using rectangular waveguide method. Advanced Materials Research, 1024. pp. 15-18.

Sow Mei, I.L. and Ismail, I.B. and Abdullah, B.B. and Shafquet, A. (2014) Evaluation of electrical capacitance tomography thresholding techniques for void fraction measurement of gas-liquid system. Applied Mechanics and Materials, 625. pp. 439-443.

Steele, G.S. and Khalid Ali, K. (2014) Excellence in Malaysian universities: Senior academics in public and private institutions discuss this notion. Pertanika Journal of Social Sciences and Humanities, 22 (2). pp. 665-679.

Subbarao, D. and Abd Elghafoor Hassan, R.H. and Ramasamy, M. (2014) Dynamics of wall heated packed bed reactors. Applied Mechanics and Materials, 625. pp. 402-405.

Subbarao, D. and Abd Elghafoor Hassan, R.H. and Ramasamy, M. (2014) Heat transfer with chemical reaction in wall heated packed bed reactor. Applied Mechanics and Materials, 625. pp. 722-725.

Subbarao, D. and Mohd. Zabidi, N.A. and Chowdhury, S. and Bustam-Khalil, M.A. and Mutalib, M.I.A. (2014) An equation of state for the liquid phase. Applied Mechanics and Materials, 625. pp. 582-585.

Subramonian, S. and Said, M.R. and Rostam, O. and Hafiz, M.Z. and Luqman, H.H. and Shaaban, A. and Dimin, M.F. (2014) Top spray fluidized bed granulated paddy urea fertilizer. Applied Mechanics and Materials, 606. pp. 137-140.

Sulaiman, S.A. and Razali, N.H.M. and Konda, R.E. and Atnaw, S.M. and Moni, M.N.Z. (2014) On the diversification of feedstock in gasification of oil palm fronds. Journal of Mechanical Engineering and Sciences, 6. pp. 907-915.

Sulaiman, S.A. and Zin, N.A.M. (2014) On gasifier cookstove operation fuelled by different lignocellulosic biomass materials. Journal of Mechanical Engineering, 11 (1). pp. 45-54.

Suleman, H. and Maulud, A.S. and Man, Z. (2014) Comparative study of linear co-volume based mixing rules for equation of state/ excess GIBBS energy (EOS/GE) models for CO2 � MEA and CO2 � MDEA systems. Applied Mechanics and Materials, 625. pp. 541-544.

Suman, S. and Hussin, F.A. and Malik, A.S. and Walter, N. and Goh, K.L. and Hilmi, I. and Ho, S.H. (2014) Image enhancement using geometric mean filter and gamma correction for WCE images. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8836. pp. 276-283.

Sundaramoorthy, S. and Ramasamy, M. (2014) Tuning optimal proportional-integral-derivative controllers for desired closed-loop response using the method of moments. Industrial and Engineering Chemistry Research, 53 (44). pp. 17403-17418.

Syuhaidah, R. and Norani, M.M. and Sufian, S. (2014) The effect of surface area, pore volume, and pore size distribution on the modified multiwalled carbon nanotubes. Applied Mechanics and Materials, 625. pp. 148-151.

Taha, M.F. and Shuib, A.S. and Shaharun, M.S. and Borhan, A. (2014) Adsorptive removal of ni2+ from aqueous solution onto rice husk-based activated carbon. Applied Mechanics and Materials, 625. pp. 893-896.

Taiwo, A.A. and Downe, A.G. and Loke, S.-P. (2014) Behavioral intention towards e-government in malaysia: A structural equation modeling approach. International Journal of Electronic Government Research, 10 (2). pp. 8-21.

Talebian, S.H. and Masoudi, R. and Tan, I.M. and Zitha, P.L.J. (2014) Foam assisted CO2-EOR: A review of concept, challenges, and future prospects. Journal of Petroleum Science and Engineering, 120. pp. 202-215.

Talebian, S.H. and Tan, I.M. and Masoudi, R. and Onur, M. (2014) Fluid-fluid interactions in a system of CO2, oil, surfactant solution, and brine at high pressures and temperatures - A Malaysian reservoir case. Journal of Petroleum Science and Engineering, 124. pp. 313-322.

Talpur, M.A.H. and Napiah, M. and Chandio, I.A. and Qureshi, T.A. (2014) A comprehensive evaluation of basic health facilities according to local standards and demographic features of umarkot sub-region, Pakistan. Research Journal of Applied Sciences, Engineering and Technology, 7 (22). pp. 4754-4762.

Tariq Jan, M. and Hisham Bin Hamid, N. and Md Khir, M.H. and Ashraf, K. and Shoaib, M. (2014) Reliability and fatigue analysis in cantilever-based MEMS devices operating in harsh environments. Journal of Quality and Reliability Engineering, 2014.

Tasfy, S.F.H. and Mohd Zabidi, N.A. and Shaharun, M.S. and Subbarao, D. (2014) Effect of Mn and Pb promoters on the performance of Cu/ZnO-catalyst in Co2 hydrogenation to methanol. Applied Mechanics and Materials, 625. pp. 289-292.

Teo, W. and Dipl-Ing, G.M. (2014) Shear effectiveness of shallow-angle bent-up bars for reinforced concrete beams. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 167 (7). pp. 398-413.

Thuy, N.T.P. and Pendyala, R. and Marneni, N. (2014) Heat exchanger network optimization using differential evolution with stream splitting. Applied Mechanics and Materials, 625. pp. 373-377.

Toloue, I. and Fateh, A. and Liew, M. (2014) Comparison of classical tsunami resistance systems in RC structure. Advances in Structural Engineering, 17 (2). pp. 157-164.

Tran, N. and Uemura, Y. and Chowdhury, S. and Ramli, A. (2014) A review of bio-oil upgrading by catalytic hydrodeoxygenation. Applied Mechanics and Materials, 625. pp. 255-258.

Trinh, T.H. and Dao, Q.N. and Kushaari, K. and Ismail, L. and Shuib, A. (2014) Study the release of urea from Agrium® coated urea using UV-Vis spectrometer. Applied Mechanics and Materials, 625. pp. 745-748.

Trinh, T.H. and KuShaari, K. and Shuib, A.S. and Bin Ismail, L. and Basit, A. and Azeem, B. (2014) Modeling the release of urea from coated urea: The constant release stage. Advanced Materials Research, 970. pp. 166-171.

Tufa, L.D. and Ramasamy, M. (2014) Robust and effective PID controller identification for delay dominant systems. Applied Mechanics and Materials, 625. pp. 478-481.

Tunio, S.Q. and Bhattacharya, S.K. and Memon, K.R. and Irawan, S. and Kyaw, A. and Abdullah, M.F. (2014) Investigating methane adsorption potential of Malaysian coal for coal bed methane (CBM) study. Mediterranean Journal of Social Sciences, 5 (27). pp. 178-183.

Ty, P. and Potty, N.S. and Akram, M.K.M. (2014) Mathematical matrix method to predict project total cost & schedule. International Journal of Applied Engineering Research, 9 (18). pp. 5029-5056.

Ud Din, I. and Shaharun, M.S. and Subbarao, D. and Naeem, A. (2014) Homogeneous deposition precipitation method for synthesis of carbon nanofibre based Cu-ZrO2 catalyst for hydrogenation of CO2 to methanol. Applied Mechanics and Materials, 446-44. pp. 83-87.

Uemura, Y. and Norizan, A. and Afif, H.A. and Osman, N. and Omar, W.N. and Abdullah, B. and Tsutsui, T. (2014) Fast pyrolysis of oil palm kernel shell in a fluidized bed reactor: The effect of biomass size on the yields of pyrolysis products. Applied Mechanics and Materials, 625. pp. 608-611.

Ullah, S. and Ahmad, F. and Shariff, A.M. and Bustam, M.A. (2014) Synergistic effects of kaolin clay on intumescent fire retardant coating composition for fire protection of structural steel substrate. Polymer Degradation and Stability, 110. pp. 91-103.

Ullah, S. and Bustam, M.A. and Nadeem, M. and Naz, M.Y. and Tan, W.L. and Shariff, A.M. (2014) Synthesis and thermal degradation studies of melamine formaldehyde resins. Scientific World Journal, 2014.

Ullah, S. and Nadeem, M. and Shariff, A.B.M. and Ahmad, F. and Shahid, S.A. and Sagir, M. and Raza Malik, M.R. and Mushtaq, M. (2014) The synergistic effect of thiourea and surfactants on corrosion inhibition of stainless steel-316 in hydrochloric acid. Advanced Materials Research, 917. pp. 28-34.

Ullah, S. and Shariff, A.M. and Bustam, M.A. and Elkhalifah, A.E.I. and Murshid, G. and Riaz, N. and Shimekit, B. (2014) Effect of modified MIL-53 with multi-wall carbon nanotubes and nano fibers on CO2 adsorption. Applied Mechanics and Materials, 625. pp. 870-873.

Ullah, Z. and Bustam, M.A. and Man, Z. (2014) Preparation of biodiesel from waste cooking oil catalyzed by basicionic liquid. Applied Mechanics and Materials, 625. pp. 874-876.

Vakili, M. and Zwain, H.M. and Rafatullah, M. and Gholami, Z. and Mohammadpour, R. (2014) Potentiality of Palm Oil Biomass with Cow Dung for compost production. KSCE Journal of Civil Engineering, 19 (7). pp. 1994-1999.

Vasant, P. (2014) Hybrid line search and simulated annealing for production planning system in industrial engineering. International Journal of Manufacturing, Materials, and Mechanical Engineering, 4 (2). pp. 1-13.

Wagdy, M. and Faye, I. and Rohaya, D. (2014) Border noise removal and clean up based on retinex theory. Lecture Notes in Electrical Engineering, 285 LN. pp. 345-352.

Wahab, I.B.M.A. and Fong Yeong, Y. (2014) Effect of ultrasonic pre-treatment durations on the formation of zeolite-T. Applied Mechanics and Materials, 625. pp. 911-915.

Waris, M. and Shahir Liew, M. and Khamidi, M.F. and Idrus, A. (2014) Criteria for the selection of sustainable onsite construction equipment. International Journal of Sustainable Built Environment, 3 (1). pp. 96-110.

Wong, M.K. and Bustam, M.A. and Shariff, A.M. (2014) Raman spectroscopic study for the determination of monoethanolamine concentration. Applied Mechanics and Materials, 625. pp. 709-713.

Yahaya Khan, M. and Abdul Karim, Z.A. and Hagos, F.Y. and Aziz, A.R.A. and Tan, I.M. (2014) Current trends in water-in-diesel emulsion as a fuel. The Scientific World Journal, 2014.

Yahya, N. and Kamel, N.S. and Malik, A.S. (2014) Subspace-based technique for speckle noise reduction in ultrasound images. BioMedical Engineering Online, 13 (1).

Yaqub, A. and Isa, M.H. and Kutty, S.R.M. and Ajab, H. (2014) Electrochemical degradation of PAHs in produced water using Ti/Sb2O5-SnO2-IrO2 anode. Electrochemistry, 82 (11). pp. 979-984.

Yaqub, S. and Mellon, N. and Shariff, A.M. (2014) A review on robustness of covalent organic polymers for Co2 capture. Applied Mechanics and Materials, 625. pp. 237-240.

Yasir, M. and Chowdhury, S. and Mansor, N. and Mohammad, N.M. and Uemura, Y. (2014) Upgrading of pyrolysis bio-oil to fuel over supported nanomaterials �A review. Applied Mechanics and Materials, 625. pp. 357-360.

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. and Ng, C.Y. (2014) Prediction of surge motion response of floating structure using kalman smoother adaptive filters based time-domain volterra model. Applied Mechanics and Materials, 660. pp. 799-803.

Yeong, Y.F. and Novichaka, S.A. and Lai, L.S. and Lau, K.K. and Azmi, M.S. (2014) Investigation of ultrasonic pretreatment on the synthesis of Zeolite-T and its CO2 adsorption characteristics. Advanced Materials Research, 970. pp. 35-38.

Yong, R. and Maulud, A.S. and Suleman, H. (2014) Economic optimization of Co2 capture process using MEA-MDEA mixtures. Applied Mechanics and Materials, 625. pp. 422-425.

Yusup, S. (2014) Response to "comment on study of fuel properties of rubber seed oil based biodiesel" Energy Convers. Manage. 2014;78:266-275 by Ahmad et al. Energy Conversion and Management, 86. pp. 1189-1192.

Zabiri, H. and Ariff, M. and Tufa, L.D. and Ramasamy, M. (2014) A comparison study between integrated OBFARX-NN and OBF-NN for modeling of nonlinear systems in extended regions of operation. Applied Mechanics and Materials, 625. pp. 382-385.

Zahari, A.A. and Jaafar, J. (2014) Hybridization of hidden markov model and case based reasoning for time series forecasting. Frontiers in Artificial Intelligence and Applications, 265. pp. 63-74.

Zaid, H.M. and Ahmad Latiff, N.R. and Yahya, N. (2014) The effect of zinc oxide and aluminum oxide nanoparticles on interfacial tension and viscosity of nanofluids for enhanced oil recovery. Advanced Materials Research, 1024. pp. 56-59.

Zaid, H.M. and Azahar, W.A.W. and Soleimani, H. and Latiff, N.R.A. and Shafie, A. and Lee, K.C. and Beh, H.G. (2014) Effect of Nickel: Zinc ratio in nickel-zinc-ferrite nanoparticles as surfactant on recovery efficiency in enhanced oil recovery. Journal of Nano Research, 29. pp. 115-120.

Zain, A.M. and Abu, A. (2014) In-vivo blood glucose control by phenolic compound from Vernonia amygdalina, Andrographis paniculata, and Pithecellobium jiringa in Streptozotoxin-induced diabetic rats. Advances in Environmental Biology, 8 (14). pp. 131-134.

Zainal Abidin, M.U.S. and Mukhtar, H. and Shaharun, M.S. (2014) Removal of amines from wastewater using membrane separation processes. Applied Mechanics and Materials, 625. pp. 639-643.

Zainal-Abidin, M. and Yusoff, N. and Mohd-Siraj, K. (2014) A taguchi-SQP approach for minimizing energy per unit diesel production at crude distillation unit. Advanced Materials Research, 917. pp. 220-231.

Zaine, S.N.A. and Mohamed, N.M. and Bustam, M.A. (2014) Optimized TiO2 nanocrystallites aggregates for enhanced efficiency in dye solar cells. Advanced Materials Research, 917. pp. 35-44.

Zaini, D. and Shariff, A.M. and Leong, C.T. (2014) Three-tier inherent safety quantification (3-TISQ) for toxic release at preliminary design stage. Applied Mechanics and Materials, 625. pp. 426-430.

Zardari, M.A. and Jung, L.T. and Zakaria, M.N.B. (2014) Data classification based on confidentiality in virtual cloud environment. Research Journal of Applied Sciences, Engineering and Technology, 8 (13). pp. 1498-1509.

Zawawi, Noor Amila (2014) Excel Through UTP Civil Engineering Programme. New Sunday Times, Learning Curve Section, Educational Supplement.

Zhalehrajabi, E. and Rahmanian, N. and Zarrinpashne, S. and Balasubramanian, P. (2014) Investigation of the growth of particles produced in a laval nozzle. Particulate Science and Technology, 32 (6). pp. 595-601.

Zia-ul-Mustafa, M. and Ahmad, F. and Megat-Yusoff, P.S.M. and Aziz, H. (2014) The effect of wollastonite filler on thermal performance of intumescent fire retardant coating. Advanced Materials Research, 970. pp. 328-331.

Ziyada, A.K. and Wilfred, C.D. (2014) Effect of temperature and anion on densities, viscosities, and refractive indices of 1-Octyl-3-propanenitrile Imidazolium-based ionic liquids. Journal of Chemical and Engineering Data, 59 (5). pp. 1385-1390.

Ziyada, A.K. and Wilfred, C.D. (2014) Physical properties of ionic liquids consisting of 1-butyl-3- propanenitrile- and 1-decyl-3-propanenitrile imidazolium-based cations: Temperature dependence and influence of the anion. Journal of Chemical and Engineering Data, 59 (4). pp. 1232-1239.

Zubair, M. and Tang, T.B. (2014) A high resolution capacitive sensing system for the measurement of water content in crude oil. Sensors (Switzerland), 14 (7). pp. 11351-11361.

Zulfiqar, M. and Omar, A.A. and Chowdhury, S. (2014) Removal of phosphate and fluoride from industrial wastewater � A short review. Applied Mechanics and Materials, 625. pp. 805-808.

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2014) Impact of motor size &efficiency on acceleration, Fuel consumption &Emissions of split- axle through- the- road parallel hybrid electric vehicle. Applied Mechanics and Materials, 663. pp. 498-503.

binti Mohd Zulkefli, N.A. and Baharudin, B. (2014) Interlinked personal story information and user interest in weblog by RSS, FOAF, and SIOC technology. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8733. pp. 104-113.

van Thien Duc, N. and Sufian, S. and Mansor, N. and Yahya, N. (2014) Investigation of carbon nanofiber supported iron catalyst preparation by deposition precipitation. Advanced Materials Research, 1043. pp. 71-75.

Book Section

UNSPECIFIED (2014) Developments in Reliability-Based Assessment of Corrosion. In: Aliofkhazraei, Mahmood (ed.) Developments in Corrosion Protection. Intech, Croatia, pp. 681-698.

ABDUL KARIM, SAMSUL ARIFFIN (2014) Construction of Cubic Ball Surface Based on Biharmonic Partial Differential Equation. In Proceedings of the 21st National Symposium on Mathematical Sciences (SKSM21), AIP Conf. Proc. 1605, 101-105 (2014), http://dx.doi.org/10.1063/1.4887572. In: AIP Conf. Proc. 1605. AIP Conf. Proc. 1605.

ABDUL KARIM, SAMSUL ARIFFIN (2014) Curve Fitting Methods for Solar Radiation Data Modeling. ICFAS 2014, 3-5 June 2014 KLCC. AIP Conf. Proc. 1621, 409 (2014), 409-415. In: IP Conf. Proc. 1621, 409 (2014), 409-415. IP Conf. Proc. 1621.

ABDUL KARIM, SAMSUL ARIFFIN (2014) Denoising Solar Radiation Data Using Coiflet Wavelets. ICFAS 2014, 3-5 June 2014 KLCC. AIP Conf. Proc. 1621, 394 (2014), 394-401. In: AIP Conf. Proc. 1621, 394 (2014), 394-401. AIP Conf. Proc. 1621.

ABDUL KARIM, SAMSUL ARIFFIN (2014) Forecasting Performance of Denosing Signal by Wavelet and Fourier Transforms using SARIMA Model. In Proceedings of the 21st National Symposium on Mathematical Sciences (SKSM21), AIP Conf. Proc. 1605, 961-966 (2014). In: AIP Conf. Proc. 1605, 961-966 (2014). AIP Conf. Proc. 1605.

ABDUL KARIM, SAMSUL ARIFFIN (2014) Heat simulation via Scilab programming. AIP Conf. Proc. 1605, 113-118, (2014); doi: 10.1063/1.4887574. In: AIP Conf. Proc. 1605. AIP Conf. Proc. 1605.

ABDUL KARIM, SAMSUL ARIFFIN (2014) Implementation of optimum solar electricity generating system. AIP Conf. Proc. 1621, 278(2014), 278-283. In: AIP Conf. Proc. 1621, 394 (2014). AIP Conf. Proc. 1621.

ABDUL KARIM, SAMSUL ARIFFIN (2014) Implicit Finite Difference Solutions of One-Dimensional Burgers’ Equation Using Newton-HSSOR Method. In International Conference on Mathematical Sciences and Statistics 2013, Kilicman, A., Leong, W.J. and Eshkuvatov, Z. (Eds.,), pp. 285-295. In: International Conference on Mathematical Sciences and Statistics 2013, Kilicman, A., Leong, W.J. and Eshkuvatov, Z. (Eds.,). SPRINGER VERLAG .

ABDUL KARIM, SAMSUL ARIFFIN (2014) Long Memory Analysis using Maximal Overlap Discrete Wavelet Transforms. In Research in Statistical Analysis, Majid, A.A., Sulaiman, H. and Ismail, M.T. (Eds.,), School of Mathematical Sciences, Universiti Sains Malaysia (USM), pp. 155-165, 2014. In: Research in Statistical Analysis. School of Mathematical Sciences, Universiti Sains Malaysia (USM).

ABDUL KARIM, SAMSUL ARIFFIN (2014) Numerical Performance of half-sweep SOR method for solving second order composite closed Newton-Cotes system. AIP Conf. Proc. 1621, 123(2014), 123-131. In: AIP Conf. Proc. 1621, 123(2014), 123-131. AIP Conf. Proc. 1621.

ABDUL KARIM, SAMSUL ARIFFIN (2014) The statistical analysis of evaluating crude oils. AIP Conf. Proc. 1621, 422 (2014), 422-428. In: AIP Conf. Proc. 1621, 394 (2014). AIP Conf. Proc. 1621.

Amin, Hafeez Ullah and Malik, Aamir Saeed (2014) Memory Retention and Recall Process. In: EEG/ERP Analysis: Methods and Applications. CRC Press.

Janjua, Uzair Iqbal and Oxley, A. and Jaafar, Jafreezal (2014) Effective Risk Management of Software Projects (ERM): An Exploratory Literature Review of IEEE and Scopus Online Databases. In: Proceedings of the First International Conference on Advanced Data and Information Engineering (DaEng-2013). Springer Singapore, pp. 445-452.

Javed, Ehtasham and Faye, Ibrahima and Malik, Aamir Saeed and Abdullah, and Jafri Malin (2014) A Hybrid Method to Improve the Reduction of Ballistocardiogram Artifact from EEG Data. In: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Springer Verlag.

Khamidi, M. Faris and Glover, Curtis and Farhan, S. A. and Puad, N. H. A. and Nuruddin, F (2014) Effect of silica aerogel on the thermal conductivity of cement paste for the construction of concrete buildings in sustainable cities. In: High Performance and Optimum Design of Structures and Materials. WIT Transactions on The Built Environment, 137 . WIT Press, Southampton, UK, pp. 665-674. ISBN 978-1-84564-774-2

Lai, Fong Woon (2014) Hybridization of Ensemble Kalman Filter and Non-linear Auto-regressive Neural Network for Financial Forecasting. In: Mining Intelligence and Knowledge Exploration. Springer, London, pp. 72-81. ISBN 978-3-319-13816-9

Qidwai, Uvais and Malik, Aamir Saeed and Shakir, Mohamed (2014) Embedded Fuzzy Classifier for Detection and Classification of Preseizure state using Real EEG data. In: The 15th International Conference on Biomedical Engineering: ICBME 2013, 4th to 7th December 2013, Singapore. Springer International Publishing.

Said, Jadid Abdulkadir and Yong, S.P. and Maran, Marimuthu and Lai, Fong Woon (2014) Hybridization of Ensemble Kalman Filter and Non-linear Auto-regressive Neural Network for Financial Forecasting. In: Mining Intelligence and Knowledge Exploration. Springer, London, pp. 72-81. ISBN 978-3-319-13816-9

Said , Jadid Abdulkadir and Suet Peng, Yong and Maran , Marimuthu and Lai, Fong Woon (2014) Hybridization of Ensemble Kalman Filter and Non-linear Auto-regressive Neural Network for Financial Forecasting. In: Mining Intelligence and Knowledge Exploration. Springer, London, pp. 72-81. ISBN 978-3-319-13816-9

Suman, Shipra and Hussin, Fawnizu Azmadi and Malik, Aamir Saeed and Walter, Nicolas and Goh, Khean Lee and Hilmi, Ida and Ho, and Shiaw hooi (2014) Image Enhancement Using Geometric Mean Filter and Gamma Correction for WCE Images. In: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Springer Verlag.

Conference or Workshop Item

Abbas, M.A. and Ahmad, W.F.W. and Kalid, K.S. (2014) A pragmatic use of Semantic Web technologies for preschool cognitive skills tutoring system. In: UNSPECIFIED.

Abbas, Muhammad Azeem and Ahmad, Wan Fatimah Wan and Kalid, Khairul Shafee (2014) OntoCog: A Knowledge based Approach for Preschool Cognitive Skills Learning Application. In: 2nd International Conference on Innovation, Management and Technology Research.

Abbas, Muhammad Azeem and Ahmad, Wan Fatimah Wan and Kalid, Khairul Shafee (2014) A pragmatic use of Semantic Web technologies for preschool cognitive skills tutoring system. In: Computer and Information Sciences (ICCOINS), 2014 International Conference on.

Abbas, T. and Mutalib, M.I.A. and Bustam, A. and Nazir, S. and Abai, M.B. and Khan, E. (2014) Morphological based mechanism for adsorption of Hg from natural gas using solid supported ionic liquids. In: UNSPECIFIED.

Abbasi, A. and Hashim, F.M. (2014) A review on the application of empirical models to hydrate formation prediction. In: UNSPECIFIED.

Abbasi, I. and Yahaya, N.Z. (2014) Development of universal LED driver for low power application. In: UNSPECIFIED.

Abdalla, I.I. and Ibrahim, T. and Bin Mohd Nor, N. (2014) Optimization of iron-cored linear motor with trapezoidal magnet using finite-element analysis. In: UNSPECIFIED.

Abdalsalam M., E. and Yusoff, M.Z. and Kamel, N. and Malik, A. and Meselhy, M. (2014) Mental task motor imagery classifications for noninvasive brain computer interface. In: UNSPECIFIED.

Abdel-Aty, A.-H. and Zakaria, N. and Mabrok, M.A. (2014) Dynamics of the entanglement over noisy quantum networks. In: UNSPECIFIED.

Abdul Rahman, Z.H. and Khir, M.H.Md. and Burhanudin, Z.A. and Abdul Rahman, A.A. and Wan Jamil, W.A. (2014) Design of CMOS based thermal energy generator for energy harvesting. In: UNSPECIFIED.

Abdulkadir, S.J. and Yong, S.-P. (2014) Empirical analysis of parallel-NARX recurrent network for long-term chaotic financial forecasting. In: UNSPECIFIED.

Abdulkarim, M. and Ahmad, W.F.W. and Ansari, A. and Nyamasvisva, E.T. and Shafie, A. (2014) Airwaves estimation in shallow water CSEM data: Multi-layer perceptron versus multiple regression. In: UNSPECIFIED.

Abdulkarim, Muhammad and Ahmad, Wan Fatimah Wan and Ansari, Adeel and Nyamasvisva, Elisha Tadiwa and Shafie, Afza (2014) Airwaves estimation in shallow water CSEM data: Multi-layer perceptron versus multiple regression. In: Computer and Information Sciences (ICCOINS), 2014 International Conference on.

Abidin, K.A.Z. and Ismail, E.A. and Zainuddin, A. and Hussain, P. (2014) Investigation of microstructure and corrosion propagation behaviour of nitrided martensitic stainless steel plates. In: UNSPECIFIED.

Abubakar, M.Y. and Jung, L.T. and Zakaria, N.M. and Foong, O.M. (2014) Proposed method for enhancing quantum bit error rate using quantum key distribution technique. In: UNSPECIFIED.

Adam, I.K. and Aziz, A.R.A. and Yusup, S. (2014) Performance and emission characteristics of an idi diesel engine fuelled biodiesel (Rubber Seed Oil and Palm Oil Mix) diesel blends. In: UNSPECIFIED.

Adhani, N.I. and Rambli, D.R.A. (2014) A multimodal interaction design guideline for mobile augmented reality application. In: UNSPECIFIED.

Adoum, B.A. and Wen, W.P. (2014) Numerical investigation of novel switchable microwave band-stop to bandpass filters. In: UNSPECIFIED.

Afrooza, I.E. and Binti Megat Yusoff, P.S.M. and Ahmad, F. and Muhsan, A.S. (2014) A numerical analysis for predicting the thermal conductivity of carbon nanotube reinforced copper-matrix nanocomposites. In: UNSPECIFIED.

Agnia, A. and Algdamsi, H.A. and Al Mossawy, M.I. (2014) Oil-water relative permeability data for reservoir simulation input, part-1: Systematic quality assessment and consistency evaluation. In: UNSPECIFIED.

Ahmad, Rana Fayyaz and Malik, Aamir Saeed and Kamel , Nidal and Reza, Faruque and Abdul Karim, Ahmad Helmy (2014) Simultaneous EEG-fMRI Data Acquisition during Cognitive Task. In: 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014.

Ahmad, F. and Dennis, J.O. and Khir, M.H.B.M. and Bin Hamid, N.H. and Yar, A. (2014) Modeling and simulation of two modes of vibration in MEMS devices based on embedded piezoresistors. In: UNSPECIFIED.

Ahmad, F. and Ullah, S. and Mohammad, W.F. and Shariff, M.F. (2014) Thermal performance of alumina filler reinforced intumescent fire retardant coating for structural application. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2014) A review of educational games design frameworks: An analysis from software engineering. In: UNSPECIFIED.

Ahmad, R.F. and Malik, A.S. and Amin, H. and Kamel, N. and Zafar, R. and Qayyum, A. (2014) A new approach for error minimization of piezoelectric sensor output variations using fuzzy logic. In: UNSPECIFIED.

Ahmad, R.F. and Malik, A.S. and Kamel, N. and Reza, F. (2014) Design and development of simultaneous EEG-fMRI data acquisition setup to observe brain activity. In: UNSPECIFIED.

Ahmad, R.F. and Malik, A.S. and Kamel, N. and Reza, F. and Karim, A.H.A. (2014) Simultaneous EEG-fMRI data acquisition during cognitive task. In: UNSPECIFIED.

Ahmad, W.F.W. and Muddin, H.N.B.I. and Shafie, A. (2014) Number skills mobile application for down syndrome children. In: UNSPECIFIED.

Ahmad, Wan Fatimah Wan and Muddin, Hidayatun Nafisah Binti Isa and Shafie, Afza (2014) Number skills mobile application for down syndrome children. In: Computer and Information Sciences (ICCOINS), 2014 International Conference on.

Ahmed, A.B. and Zawawi, A.N.B.W.A. (2014) Offshore platform decommissioning: The need for a cost index. In: UNSPECIFIED.

Ahmed, A.Y. and Dennis, J.O. and Md Khir, M.H. and Mohamad Saad, M.N. (2014) Design and characterization of embedded microheater on CMOS-MEMS resonator for application in mass-sensitive gas sensors. In: UNSPECIFIED.

Ahmed, M.S.A.M.S. and Gilani, S.I.U.-H. (2014) Simulation model for dynamic operation of double-effect absorption chillers. In: UNSPECIFIED.

Ahsanullah, S.S. and Sulaiman, S. and Kamil, A. and Khan, M. (2014) Human finger input properties for precise target selection on multi-touch screen. In: UNSPECIFIED.

Akbar, A.R. and Awang, M. (2014) Auto-reinforce magnetic flywheel as recent advancement of automobile flywheel. In: UNSPECIFIED.

Akbar, R. and Safdar, S. and Hassan, M.F. and Abdullah, A. (2014) Software development process tailoring for small and medium sized companies. In: UNSPECIFIED.

Al-Absi, H.R.H. and Samir, B.B. and Sulaiman, S. (2014) A computer aided system for breast cancer detection and diagnosis. In: UNSPECIFIED.

Al-Kayiem, H.H. and Al-Habeeb, L.N. (2014) Ribbed double pipe heat exchanger: Experimental analysis. In: UNSPECIFIED.

Al-Kayiem, H.H. and Al-Naimi, F.B.I. and Amat, W.N.B.W. (2014) Analysis of boiler operational variables prior to tube leakage fault by artificial intelligent system. In: UNSPECIFIED.

Al-Kayiem, H.H. and Osei, H. and Yin, K.Y. and Hashim, F.M. (2014) A comparative study on the hydrodynamics of liquid�liquid hydrocyclonic separation. In: UNSPECIFIED.

Al-Kayiem, Hussain H. (2014) Elementary Lecture on the Pressure Drop Due to Friction in Single and Two-phase Flows. In: Energy Quest 2014, 23-25 April 2014, URAL Federal University – Ekaterinburg – Russia. (Unpublished)

Al-Mudhafer, W.J. and Al-Khazraji, A.J. (2014) Efficient reservoir modeling-statistical approach for evaluation and development of future waterdrive undersaturated oil reservoir performance. In: UNSPECIFIED.

Al-Mudhafer, W.J. and Alta'ee, A.F. (2014) Combining design of experiments and streamline-based simulation for efficient thermal IOR development study in a waterdrive light oil reservoir. In: UNSPECIFIED.

Al-Nasheri, A. and Ali, Z. and Muhammad, G. and Alsulaiman, M. (2014) Voice pathology detection using auto-correlation of different filters bank. In: UNSPECIFIED.

Al-Nuaimi, I.T.I. and Mahmood, A.K.B. and Jebur, H.H. (2014) Proposed conceptual model for E-service quality in Malaysian universities. In: UNSPECIFIED.

Al-Wakeel, H.B. and Abdul Karim, Z.A. and Al-Kayiem, H.H. (2014) Electric field prediction using micro-plasma inside a microwave cavity for soot oxidation. In: UNSPECIFIED.

Alabool, H.M. and Mahmood, A.K. (2014) Common Trust Criteria for IaaS cloud evaluation and selection. In: UNSPECIFIED.

Albarody, T.M.B. and Bt Mustaffa, Z. and Liew, M.S. and Toloue, I. and Setvati, M.R. (2014) A composite steel plate shear walls for offshore constructions. In: UNSPECIFIED.

Albarody, T.M.B. and Mustaffa, Z. (2014) Sandwich cryogenic pipeline. In: UNSPECIFIED.

Alex, L.V.P. and Yahaya, N.Z. (2014) Improvement of safety and protection for electronic lighting ballast in saltwater environment. In: UNSPECIFIED.

Alhaj, H.M.M. and Nor, N.M. and Asirvadam, V.S. and Abdullah, M.F. (2014) Power system harmonics estimation using LMS, LMF and LMS/LMF. In: UNSPECIFIED.

Alhassan, A.M. and Badruddin, N. and Saad, N.M. and Aljunid, S.A. (2014) Upper and lower bounds for the bit error rate for multiple photodiode balanced detectors in SAC OCDMA systems. In: UNSPECIFIED.

Alhassan, A.M. and Badruddin, N. and Saad, N.M. and Aljunid, S.A. (2014) Upper and lower bounds for the bit error rate for multiple photodiode balanced detectors in SAC OCDMA systems. In: Intelligent and Advanced Systems (ICIAS), 2014 5th International Conference on.

Alhussian, H. and Zakaria, N. and Hussin, F.A. and Bahbouh, H.T. (2014) A semi greedy soft real-time multiprocessor scheduling algorithm. In: UNSPECIFIED.

Alhussian, Hitham and Zakaria, Mohd Nordin and Hussin, Fawnizu Azmadi (2014) A semi greedy soft real-time multiprocessor scheduling algorithm. In: The International Conference on Computer and Information Sciences (ICCOINS), 3-5 June 2014, Kuala Lumpur Malaysia.

Ali, Shah Syed Ayaz and Tang, Tong Boon and Laude, Augustinus and Faye, Ibrahima (2014) Making every microaneurysm count: a hybrid approach to monitor progression of diabetic retinopathy. In: 2014 5th International Conference on Intelligent and Advanced Systems (ICIAS).

Ali, A.S.O. and Sagayan, V. and Malik, A.S. and Rasheed, W. (2014) A combined face, fingerprint authentication system. In: UNSPECIFIED.

Ali, B.H. and Gilani, S.I. and Al-Kayiem, H.H. (2014) A three dimensional performance analysis of a developed evacuated tube collector using a CFD fluent solar load model. In: UNSPECIFIED.

Ali, G. and Hussin, F.A. and Ali, N.B.Z. and Hamid, N.H. (2014) Enhancement in IEEE 1500 standard for at-speed functional testing. In: UNSPECIFIED.

Ali, G. and Hussin, F.A. and Ali, N.B.Z. and Hamid, N.H. and Adnan, R.M. (2014) Enhancement in IEEE 1500 standard for at-speed test and debug. In: UNSPECIFIED.

Ali, Ghazanfar and Hussin, Fawnizu Azmadi and Zain Ali, Noohul Basheer and Hamid, Nor Hisham (2014) Enhancement in IEEE 1500 Standard for At-Speed Functional Testing. In: 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014, 3-5 June 2014, Kuala Lumpur Malaysia.

Ali, Ghazanfar and Hussin, Fawnizu Azmadi and Zain Ali, Noohul Basheer and Hamid, Nor Hisham and Adnan, Raja Mahmud (2014) Enhancement in IEEE 1500 Standard for at-speed Test and Debug. In: 10th IEEE Dallas Circuits and Systems Conference (DCAS 2014), 12-13 October 2014, Dallas, USA.

Ali, M.K.M. and Ruslan, M.H. and Muthuvalu, M.S. and Wong, J. and Sulaiman, J. and Yasir, S.M. (2014) Mathematical modelling for the drying method and smoothing drying rate using cubic spline for seaweed Kappaphycus Striatum variety Durian in a solar dryer. In: UNSPECIFIED.

Ali, S.H. and Baheta, A.T. and Hassan, S. (2014) Effect of low pressure end conditions on steam power plant performance. In: UNSPECIFIED.

Ali, S.M. and Zakariya, M.A. and Baharudin, Z. and Adz, J.J. (2014) Parabolic reflector fed by Cylindrical Dielectric Resonator Antenna with high gain. In: UNSPECIFIED.

Ali, S.S.A. and Tang, T.B. and Laude, A. and Faye, I. (2014) Making every microaneurysm count: A hybrid approach to monitor progression of diabetic retinopathy. In: UNSPECIFIED.

Ali, T. and Jung, L.T. and Faye, I. (2014) Three hops reliability model for Underwater Wireless Sensor Network. In: UNSPECIFIED.

Ali, Z. and Muhammad, G. and Alsulaiman, M. and Elamvazuthi, I. and Al-Mutib, K. (2014) Automatic speech recognition for dysphonic patients by using oriented local features. In: UNSPECIFIED.

Aliyu, Z. and Rahim, L.A. and Mustapha, E.E. (2014) A combine usability framework for IMCAT evaluation. In: UNSPECIFIED.

Alkali, A.U. and Ginta, T.L. and Abdul-Rani, A.M. (2014) Finite element modelling of a pattern of temperature distribution during travelling heat source from oxyacetylene flame. In: UNSPECIFIED.

Almahasneh, H. and Kamel, N. and Walter, N. and Malik, A.S. and Chooi, W.-T. (2014) Topographic map analysis for driver cognitive distraction. In: UNSPECIFIED.

Almahasneh, H.S. and Kamel, N. and Malik, A.S. and Wlater, N. and Chooi, W.T. (2014) EEG based driver cognitive distraction assessment. In: UNSPECIFIED.

Almahasneh, Hossam and Kamel , Nidal and Malik, Aamir Saeed and Nicolas, Walter and Chooi, Weng-Tink (2014) EEG based Driver Cognitive Distraction Assessment. In: 2014 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014.

Almomani, M.A.T. and Basri, S. and Mahamad, S. and Bajeh, A.O. (2014) Software process improvement initiatives in small and medium firms: A systematic review. In: UNSPECIFIED.

Alnaimi, F.B.I. and A Ali, M. and Al-Kayiem, H.H. and Mohamed Sahari, K.S.B. (2014) On-line condition monitoring system for high level trip water in steam Boiler's Drum. In: UNSPECIFIED.

Altaf, K. and Rani, A.M.A. (2014) Thermal conductivity augmentation of epoxy injection moulds for cooling time reduction. In: UNSPECIFIED.

Altahir, A.A. and Asirvadam, V.S. (2014) Building a feature-space for visual surveillance. In: UNSPECIFIED.

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H.B. and Sebastian, P. (2014) Hazardous based area mapping for surveillance monitoring. In: UNSPECIFIED.

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H.B. and Sebastian, P. (2014) Modeling camera coverage using imagery techniques for surveillance applications. In: UNSPECIFIED.

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H.B. and Sebastian, P. (2014) Optimizing visual sensor parameters for total coverage maximization. In: UNSPECIFIED.

Ameen, Mohamed Abul Hassan and Malik, Aamir Saeed and Nicolas, Walter and Faye, Ibrahima and Rasheed, Waqas and Nordin, Nadira and Mahmood, Muhammad Tariq (2014) Foreground Extraction for Real-time Crowd Analytics in Surveillance System. In: 18th IEEE International Symposium on Consumer Electronics, ISCE 2014.

Ameen, Mohamed Abul Hassan and Malik, Aamir Saeed and Nicolas, Walter and Faye , Ibrahima and Mahmood, Muhammad Tariq (2014) Mixture of Gaussian Based Background Modelling for Crowd Tracking Using Multiple Cameras. In: 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014.

Amin, H.U. and Malik, A.S. and Badruddin, N. and Chooi, W.-T. (2014) Brain behavior in learning and memory recall process: A high-resolution EEG analysis. In: UNSPECIFIED.

Amin, H.U. and Malik, A.S. and Hussain, M. and Kamel, N. and Chooi, W.-T. (2014) Brain behavior during reasoning and problem solving task: An EEG study. In: UNSPECIFIED.

Amin, Hafeezullah and Malik, Aamir Saeed and Badruddin, Nasreen and Hussain, Mohammad and Kamel , Nidal and Chooi, Weng-Tink (2014) Brain Behavior during Reasoning and Problem Solving Task: An EEG Study. In: 2014 5th International Conference on Intelligent and Advanced Systems: Technological Convergence for Sustainable Future, ICIAS 2014 - Proceedings.

Anggraeni, S. and Hussin, F.A. and Jeoti, V. (2014) Optimized encoder architecture for structured low density parity check codes of short length. In: UNSPECIFIED.

Anggraeni, Silvia and Hussin, Fawnizu Azmadi and Jeoti , Varun (2014) Optimized Encoder Architecture for Structured Low Density Parity Check Codes of Short Length. In: 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014, 3-5 June 2014, Kuala Lumpur Malaysia.

Aniza, N. and Hassan, S. and Nor, M.F.M. and Fadhil, M. (2014) Kinetic analysis of Poultry Processing Dewatered Sludge (PPDS) Using Thermogravimetric Analysis (TGA). In: UNSPECIFIED.

Anjum, N. and Badruddin, N. and Drieberg, M. (2014) Simulation of traffic congestion detection using VANETs. In: UNSPECIFIED.

Ansari, A. and Shafie, A.B. and Ansari, S. and Said, A.B.M. and Nyamasvisva, E.T. and Abdulkarim, M. and Rauf, M. (2014) Infomax and FASTICA using principle component analysis as preprocessor for airwave removal in seabed logging. In: UNSPECIFIED.

Ansari, A. and Shafie, A.B. and Ansari, S. and Said, A.B.M. and Nyamasvisva, E.T. and Abdulkarim, M. and Rauf, M. (2014) Subsurface exploration of seabed using electromagnetic waves for the detection of hydrocarbon layers. In: UNSPECIFIED.

Anwar, F. and Sulaiman, S. and Dominic, P.D.D. (2014) Role of information communication technology for evidence based medicine among physicians. In: UNSPECIFIED.

Anwar Sulaiman, S. and Atnaw, S.M. and Japar, A.R. (2014) Study on co-gasification of oil palm fronds and wood. In: UNSPECIFIED.

Ariffin, M.M. and Oxley, A. and Sulaiman, S. (2014) Students' inclinations towards games and perceptions of Game-Based Learning (GBL). In: UNSPECIFIED.

Arshad, N.I. and Mehat, M. and Ariff, M.I.M. (2014) Electronic Content Management Systems use and implementation in highly integrated businesses. In: UNSPECIFIED.

Ashraf, M. and Narahari, M. and Muthuvalu, M.S. (2014) Effects of heat generation or absorption on mixed convection flow over a stretching porous wedge with convective boundary condition. In: UNSPECIFIED.

Ashri, M. and Karuppanan, S. and Patil, S. and Ibrahim, I. (2014) Modal analysis of a centrifugal pump impeller using finite element method. In: UNSPECIFIED.

Asirvadam, V.S. and Fen, C.P. and Saad, N. and Sebastian, P. and Altahir, A.A. and Ali, A. and Hamid, N.H. (2014) Risk map for video surveillance CCTV. In: UNSPECIFIED.

Askalany, A.A. and Saha, B.B. and Habib, K. (2014) Adsorption cooling system employing activated carbon/R32 adsorption pair. In: UNSPECIFIED.

Aslam, Muhammad Zubair and Boon, Tang Tong (2014) Differential capacitive sensor based interface circuit design for accurate measurement of water content in crude oil. In: 2014 5th International Conference on Intelligent and Advanced Systems (ICIAS).

Aslam, M. and Ahmad, F. and Bintimegat Yusoff, P.S.M. and Muhamad, N. and Raza, M.R. and Irfan Shirazi, M. (2014) Effects of admixed titanium on densification of 316L stainless steel powder during sintering. In: UNSPECIFIED.

Aslam, M.Z. and Boon, T.T. (2014) Differential capacitive sensor based interface circuit design for accurate measurement of water content in crude oil. In: UNSPECIFIED.

Asrul, M. and Othman, M. and Zakaria, M. and Ahmad-Nazir, K. (2014) Morphology, tensile strength and oil resistance of gum rubber sheets prepared from lignin modified natural rubber. In: UNSPECIFIED.

Assadi, M.K. and Bin Abdul Razak, A.F.Q. and Habib, K. (2014) Solar energy potential estimation in perak using clearness index and artificial neural network. In: UNSPECIFIED.

Assadi, M.K. and Nasersharifi, Y. (2014) Investigation and measurement of copper nanofluid impact on thermal efficiency of solar collectors. In: UNSPECIFIED.

Awais, M. and Badruddin, N. and Drieberg, M. (2014) Driver drowsiness detection using EEG power spectrum analysis. In: UNSPECIFIED.

Awais, M. and Badruddin, N. and Drieberg, M. (2014) A simulator based study to evaluate driver drowsiness using electroencephalogram. In: UNSPECIFIED.

Awais, Muhammad and Badruddin, Nasreen and Drieberg, Micheal (2014) Driver drowsiness detection using EEG power spectrum analysis. In: Region 10 Symposium, 2014 IEEE.

Awang, M. and Khan, S.R. and Ghazanfar, B. and Latif, F.A. (2014) Design, fabrication and testing of fixture for implementation of a new approach to incorporate tool tilting in friction stir welding. In: UNSPECIFIED.

Ayub, T. and Shafiq, N. and Nuruddin, M.F. (2014) Mechanical properties of high-performance concrete reinforced with basalt fibers. In: UNSPECIFIED.

Aziz, A. and Saad, N.M. (2014) Load and service adaptive algorithm (LSAA) for tight coupling based integration architecture. In: UNSPECIFIED.

Aziz, H. and Ahmad, F. and Binti Megat Yusoff, P.S.M. and Zia-Ul-Mustafa, M. (2014) Effect of kaolin clay and alumina on thermal performance and char morphology of intumescent fire retardant coating. In: UNSPECIFIED.

Aziz, N.B.A. and Ahmad, R.B. and Dominic, D.D. (2014) E-Supply Chain (e-SC) trust model for B2B collaboration- A case study of Malaysian construction industry. In: UNSPECIFIED.

Aziz, N.S.A. and Ahmad, W.F.W. (2014) User experience study on mobile numerical application for children with mental disabilities. In: UNSPECIFIED.

Azmi, W.H. and Sharma, K.V. and Mamat, R. and Anuar, S. (2014) Turbulent forced convection heat transfer of nanofluids with twisted tape insert in a plain tube. In: UNSPECIFIED.

Baashar, Y.M. and Mahmood, A.K. (2014) An integrative perspective for CRMS implementation in healthcare in Malaysia. In: UNSPECIFIED.

Babiker, A. and Faye, I. and Malik, A. (2014) Differentiation of pupillary signals using statistical and functional analysis. In: UNSPECIFIED.

Babiker, Areej and Faye, Ibrahima and Malik, Aamir Saeed (2014) Differentiation of Pupillary Signals Using Statistical and Functional Analysis. In: 2014 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014.

Babiker, M.E. and Aziz, A.R.A. and Heikal, M. and Yusup, S. (2014) The pyrolysis behavior of evolved species from date palm seeds. In: UNSPECIFIED.

Bajeh, A.O. and Basri, S. and Jung, L.T. (2014) A theoretical validation of the number of polymorphic methods as a complexity metric. In: UNSPECIFIED.

Bamatraf, S. and Aboalsamh, H. and Hussain, M. and Mathkour, H. and Qazi, E.-U.-H. and Malik, A. and Amin, H. (2014) Studying the Effects of 2D and 3D Educational Contents on Memory Recall Using EEG Signals, PCA and Statistical Features. In: UNSPECIFIED.

Bazargan, M. and Habibpour, M. and Soori, S. and Koohian, A. and Jalalyfar, H. and Shahvar, M.P. (2014) Interactions between high power fiber laser and rock in shaley formation during drilling and production operation. In: UNSPECIFIED.

Bazargan, M. and Koohian, A. and Jalalyfar, H. and Habibpour, M. and Shahvar, M.P. and Madani, A. (2014) Interactions between high power fiber laser and rock in shaley formation during drilling and production operation. In: UNSPECIFIED.

Bazargan, M. and Nakhaee, A. and Koohian, A. and Irawan, S. and Habibpour, M. and Shahvar, M. (2014) Comparison of wellbore stability of UBD in the case of laser drilling and conventional operation. In: UNSPECIFIED.

Besrour, S. and Rahim, L.B.A. and Dominic, P.D.D. (2014) Assessment and evaluation of requirements elicitation techniques using analysis determination requirements framework. In: UNSPECIFIED.

Bhaskar, P.K. and Yong, S.-P. (2014) Image processing based vehicle detection and tracking method. In: UNSPECIFIED.

Bhattacharjee, S. and Rahim, L.B.A. and Aziz, I.B.A. (2014) A multibit burst error detection and correction mechanism for application layer. In: UNSPECIFIED.

Bin Suffian, M.H. and Ovinis, M. (2014) Towards an improved flow rate estimation method. In: UNSPECIFIED.

Binti, N.N. and Zakaria, M.N.B. and Aziz, I.B.A. and Binti, N.S. (2014) Optimizing BOINC scheduling using genetic algorithm based on thermal profile. In: UNSPECIFIED.

Burhani, N.R.A. and Muhammad, M. and Ismail, M.C. (2014) Available prediction methods for Corrosion under Insulation (CUI): A Review. In: UNSPECIFIED.

Butt, S.M. and Ahmad, W.F.W. and Rahim, L. (2014) Handling tradeoffs between agile and usability methods. In: UNSPECIFIED.

Butt, Saad Masood and Ahmad, Wan Fatimah Wan and Rahim, Lukman (2014) Handling tradeoffs between agile and usability methods. In: Computer and Information Sciences (ICCOINS), 2014 International Conference on.

C.T, Ramanathan and Sambu Potty, Narayanan (2014) Qualitative analysis of Time delay and Cost overrun in Multiple Design and Build Projects. In: 2014 ICDMCME 2014 conference, February 4 - 5, 2014, Bali. (Submitted)

Chandio, I.A. and Matori, A.N. and Yusof, K. and Talpur, M.A.H. and Aminu, M. (2014) GIS-basedland suitability analysis of sustainable hillside development. In: UNSPECIFIED.

Chariyev, A. and Jung, L.T. and Saad, M.N.B.M. (2014) Path loss simulation in different radio propagation models with 1.8 GHz and 2.6 GHz bands. In: UNSPECIFIED.

Chaudhary, P. and Hamid, H. and Kamel, N. and Samir, B.B. (2014) A novel approach for segment level audio retrieval using singular value decomposition. In: UNSPECIFIED.

Cheam, S.-R. and Saman, A.B.S. (2014) Developing algorithm for object tracking using passive sensors. In: UNSPECIFIED.

Chelvam, Y.K. and Zamin, N. and Steele, G.S. (2014) A preliminary investigation of M3DITRACK3R: A medicine dispensing mobile robot for senior citizens. In: UNSPECIFIED.

Chen, Y.Y. and Goh, K.N. and Fujita, Y. and Naono, K. (2014) Exploration of communication process using Business Microscope®. In: UNSPECIFIED.

Chimeremeze, O.H. and Sulaiman, S. and Foong, O.-M. (2014) An exploratory study on the prospect of Virtual Reality's key multi-sensory elements in traditional foot reflexology. In: UNSPECIFIED.

Chimeremeze, O.H. and Sulaiman, S. and Rambli, D.R.A. and Foong, O.-M. (2014) Multimodal interactions in traditional foot reflexology. In: UNSPECIFIED.

Chong, Kong Kwong and Drieberg , Micheal and Lai, Fong Woon (2014) Route Optimization of Feeder Bus for Electric Train Service. In: 5th International Conference on Intelligent & Advanced Systems (ICIAS 2014).

Chong, W.K. and Drieberg, M. and Jeoti, V. (2014) A dynamic blocking notification (BN) scheme with strategic nodes for wireless ad hoc networks. In: UNSPECIFIED.

Chong, Wai Kheong and Drieberg , Micheal and Jeoti , Varun (2014) Adaptive Ready-To-Send and Blocking Notification (RSBN) Scheme in Wireless Ad Hoc Networks. In: 5th International Conference on Intelligent & Advanced Systems (ICIAS).

Chong, Wai Kheong and Drieberg , Micheal and Jeoti , Varun (2014) A Dynamic Blocking Notification (BN) Scheme with Strategic Nodes for Wireless Ad Hoc Networks. In: 79th IEEE Vehicular Technology Conference (VTC-Spring) 2014.

Chughtai, O. and Badruddin, N. and Awang, A. and Rehan, M. (2014) Reliability-constrained routing for traffic load balancing in Wireless Sensor Networks. In: UNSPECIFIED.

Chughtai, Omer and Badruddin, Nasreen and Awang, Azlan (2014) A congestion-aware and energy efficient traffic Load balancing Scheme for routing in WSNs. In: TENCON 2014 - 2014 IEEE Region 10 Conference.

Chung, S.K. and Yee, O.C. and Singh, M.M. and Hassan, R. (2014) SQL injections attack and session hijacking on e-learning systems. In: UNSPECIFIED.

Danyaro, K.U. and Jaafar, J. and Liew, M.S. (2014) MetOcean data to linked data. In: UNSPECIFIED.

Daud, H. and Gulcharan, N.F.I. and Azhar, M.A.M. and Nor, N.M. and Ibrahim, T. (2014) Development and analysis of wireless heart rate monitoring device. In: UNSPECIFIED.

Daud, H. and Razali, R. and Low, T.J. and Sabdin, M. and Zafrul, S.Z.M. (2014) Comparative assessment of rule-based and Bayes' theorem as inference engines in diagnosing symptoms for Islamic medication expert system. In: UNSPECIFIED.

Daud, H. and Sagayan, V.A. and Razali, R. and Talib, M. (2014) Distinguishing data with and without hydrocarbon in scaled tank experiments using spline interpolation and normalized mean square error. In: UNSPECIFIED.

Dennis, L.C.C. and Chew, X. and Lee, Y. (2014) Bifurcation of rupture path by linear and cubic damping force. In: UNSPECIFIED.

Dinis, G. and Zakaria, N. and Naono, K. (2014) Pluggable scheduling on an open-source based volunteer computing infrastructure. In: UNSPECIFIED.

Dominic, D.D. and Said, A.M. (2014) Network anomaly detection approach based on frequent pattern mining technique. In: UNSPECIFIED.

Dominic, P.D.D. and Khan, H. (2014) Evaluation of online system acceptance through airlines websites in Malaysia. In: UNSPECIFIED.

Dominic, P.D.D. and Khan, H. (2014) Performance measure of airline websites using analytical hierarchy process & fuzzy analytical hierarchy process. In: UNSPECIFIED.

Eik, L.H. and Liew, S. (2014) A conceptual floating alternative to land reclamation for application in congested island states and coastal cities of Malaysia. In: UNSPECIFIED.

Elameen, M.H.E. and Karsiti, M.N. and Ibrahim, R. (2014) Nonlinear model feedback linearization control strategy of a pH neutralization process. In: UNSPECIFIED.

Eltoukhy, M.M. and Safdar Gardezi, S.J. and Faye, I. (2014) A method to reduce curvelet coefficients for mammogram classification. In: UNSPECIFIED.

Fageeri, S.O. and Ahmad, R. and Baharudin, B.B. (2014) A semi-apriori algorithm for discovering the frequent itemsets. In: UNSPECIFIED.

Farah, A.A. and Saad, S.A. and Izian, A.K. and Nor Azizi, S. (2014) Effect of tropical climate to compressive strength of high performance fibre reinforced concrete. In: UNSPECIFIED.

Farooq, H. and Jung, L.T. (2014) Choices available for implementing smart grid communication network. In: UNSPECIFIED.

Faudzi, S.A.A.M. and Yahya, N. (2014) Evaluation of LBP-based face recognition techniques. In: UNSPECIFIED.

Fayek, H.M. and Elamvazuthi, I. and Perumal, N. and Venkatesh, B. (2014) The impact of DFIG and FSIG wind farms on the small signal stability of a power system. In: UNSPECIFIED.

Firmansyaha and A. Aziz, A.R. (2014) Investigation of auto-ignition of several single fuels. In: UNSPECIFIED.

Foong, O.-M. and Tran, Q.-T. and Yong, S.-P. and Rais, H.M. (2014) Swarm inspired test case generation for online C++ programming assessment. In: UNSPECIFIED.

Gafare, M. and Dennis, J.O. and Md Khir, M.H. (2014) Design and modeling of a CMOS-MEMS capacitive resonator based on bonded-dies for gas detection. In: UNSPECIFIED.

Gardezi, S.J.S. and Faye, I. and Eltoukhy, M.M. (2014) Analysis of mammogram images based on texture features of curvelet sub-bands. In: UNSPECIFIED.

Gardezi, S.S.S. and Manarvi, I.A. and Gardezi, S.J.S. (2014) Time extension factors in construction industry of Pakistan. In: UNSPECIFIED.

Ghai, L.L. and Hisham, S.B. and Yahya, N. (2014) Automatic assessment mark entry system using local binary pattern (LBP) and salient structural features. In: UNSPECIFIED.

Ghayas, S. and Sulaiman, S. and Jaafar, J. and Mahamad, S. and Khan, M. (2014) Mobile phone Icons recognition and cultural aspects. In: UNSPECIFIED.

Ghazali, Z. and Majid, M.A.A. and Chi, T.C. (2014) Engineering economic analysis for feed gas cooler (Cold box): A case of a gas processing complex in Malaysia. In: UNSPECIFIED.

Gila, A.R. and Jaafa, J. and Omar, M. and Tunio, M.Z. (2014) Impact of personality and gender diversity on software development teams' performance. In: UNSPECIFIED.

Goh, K.N. and Jaafar, J. and Mustapha, E.E. and Goh, E.T.E. (2014) Automatic accident location detection system (AALDS). In: UNSPECIFIED.

Gulcharan, N.F.I. and Daud, H. and Nor, N.M. and Ibrahim, T. and Nyamasvisva, T.E. (2014) Investigation and development of remote vital signs monitoring device using wireless communication. In: UNSPECIFIED.

Gupta, R. and Elamvazuthi, I. and Faye, I. and Vasant, P. and George, J. (2014) Musculoskeletal ultrasound images-contrast enhancement. In: UNSPECIFIED.

Habib, A.I. and Akbar, I. (2014) Effect of accelerated ageing process on the strength of moulded and pultruded GFRP gratings. In: UNSPECIFIED.

Habib, I. and Badruddin, N. and Drieberg, M. (2014) A comparison of load-distributive path routing and shortest path routing in wireless ad hoc networks. In: UNSPECIFIED.

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2014) Effect of air-fuel ratio on the combustion characteristics of syngas (H2:CO) in direct-injection spark-ignition engine. In: UNSPECIFIED.

Hamdi, Z. and Awang, M. and Moradi, B. (2014) Low temperature carbon dioxide injection in high temperature oil reservoirs. In: UNSPECIFIED.

Hamid, E. and Nallagownden, P. and Nor, N.B.M. and Muthuvalu, M.A.L. (2014) Intelligent demand side management technique for industrial consumer. In: UNSPECIFIED.

Hamim, M.A.F.M. and Ibrahim, T. and Nor, N.M. (2014) Modeling and analyze a single-phase halbach magnetized tubular linear permanent magnet generator for wave energy conversion. In: UNSPECIFIED.

Hamim, M.A.F.M. and Ibrahim, T. and Nor, N.M. (2014) Modeling of a tubular permanent magnet linear generator for wave energy conversion using finite element method. In: UNSPECIFIED.

Hamizol, M.S. and Binti Megat Yusoff, P.S.M. and Bin Abdul Latif, M.R. (2014) Extraction of continuous fiber from mengkuang leaves: The influence of process parameters during alkaline treatment. In: UNSPECIFIED.

Hammad, D.B. and Shafiq, N. and Nuruddin, M.F. (2014) Criticality index of building systems using multi-criteria decision analysis technique. In: UNSPECIFIED.

Hammad, D.B. and Shafiq, N. and Nuruddin, M.F. and Sodangi, M. and Ahmed, U.A. (2014) Criticality analysis of defects in civil engineering structures: Case of onshore process plant. In: UNSPECIFIED.

Hani, A.F.M. and Haq, N.U. and Kumar, D. and Wei, E.H.T. (2014) Brain circuit model for drug addiction. In: UNSPECIFIED.

Hani, A.F.M. and Paputungan, I.V. and Hassan, M.F. and Asirvadam, V.S. and Daharus, M. (2014) Development of private cloud storage for medical image research data. In: UNSPECIFIED.

Hani, A.F.M. and Soomro, T.A. and Faye, I. and Kamel, N. and Yahya, N. (2014) Denoising methods for retinal fundus images. In: UNSPECIFIED.

Haruna, A.A. and Zakaria, N.B. and Jung, L.T. and Pal, A.J. and Naono, K. and Okitsu, J. (2014) Performance comparison of least slack time based heuristics for job scheduling on computational grid. In: UNSPECIFIED.

Hasan, M.H. and Jaafar, J. and Hassan, M.F. (2014) Experimental study on the effective range of FCM's fuzzifier values for web services' QoS data. In: UNSPECIFIED.

Hasan, M.K. and Sulaiman, J. and Karim, S.A.A. (2014) Heat simulation via Scilab programming. In: UNSPECIFIED.

Hasnain, S.A. and Nasif, M.S. and Pao, W. and Al-Waked, R. (2014) Effect of down stand depth variation on atriums upper balconies smoke contamination. In: UNSPECIFIED.

Hassan, M.A. and Malik, A.S. and Nicolas, W. and Faye, I. and Mahmood, M.T. (2014) Mixture of Gaussian based background modelling for crowd tracking using multiple cameras. In: UNSPECIFIED.

Hassan, M.A. and Malik, A.S. and Nicolas, W. and Faye, I. and Rasheed, W. and Nordin, N. and Mahmood, M.T. (2014) Foreground extraction for real-time crowd analytics in surveillance system. In: UNSPECIFIED.

Hassan, N.H.B. and Arshad, N.I.B. and Mustapha, E.E.B. and Jaafar, J.B. (2014) Understanding the ways organizational learning drives information technology (IT) infrastructure. In: UNSPECIFIED.

Hassan, S. and Al-Kayiem, H.H. and Ghaffari, A. (2014) Development of thermal insulation from oil palm fiber for chimney of fire tube steam packaged boiler. In: UNSPECIFIED.

Hassan, S. and Khosravi, A. and Jaafar, J. and Raza, M.Q. (2014) Electricity load and price forecasting with influential factors in a deregulated power industry. In: UNSPECIFIED.

Hassan, S. and Tesfamichael, A. and Mohd Nor, M.F. (2014) Comparison study of thermal insulation characteristics from oil palm fibre. In: UNSPECIFIED.

Hermana, M. (2014) Water saturation prediction from inverted pre-stack seismic data using empirical approximation. In: UNSPECIFIED.

Hina, S. and Oxley, A. (2014) Participation/collaboration pattern: Perspectives of trust and security risks. In: UNSPECIFIED.

Hong, K.C. and Hussin, F.A. and Saman, A.B.S. (2014) Automated train track misalignment detection system based on inertia measurement unit. In: UNSPECIFIED.

Hong, Kang Chun and Saman, Abu Bakar Sayuti and Hussin, Fawnizu Azmadi (2014) Automated Train Track Misalignment Detection System Based on Inertia Measurement Unit”. In: 2014 IEEE Student Conference on Research and Development (SCOReD), 16-17 December, 2014, Pulau Pinang.

Hong, T.N.I. and Drieberg, M. and Singh, B.S.M. (2014) Simulation and hardware implementation of solar energy harvester for wireless sensor networks. In: UNSPECIFIED.

Hooi, Y.K. and Hassan, M.F. and Shariff, A.M. and Aziz, H.A. (2014) ICT in process safety management. In: UNSPECIFIED.

Hung, N.T. and Ismail, I. and Saad, N.B. and Ibrahim, R. and Irfan, M. (2014) Design of Multi Model Predictive Control for nonlinear process plant. In: UNSPECIFIED.

Hussain, N. and Karsiti, M.N. and Yahya, N. and Jeoti, V. (2014) Wavelet optimized finite difference simulation for marine CSEM geophysical survey. In: UNSPECIFIED.

Hussain, N. and Nor, N.M. and Abdullah, M.F. and Ashraf, K. and Mirza, A. (2014) Simulation of water tree distribution in medium voltage power cable insulation model in MATLAB/simulink. In: UNSPECIFIED.

Hussin, H. and Mokhtar, A.A. and Muhammad, M. and Karim, M.A.A. (2014) Development of reliability analysis toolkit for analysing plant maintenance data. In: UNSPECIFIED.

Hyder, Rasha and Kamel, Nidal and Tang, Tong Boon and others (2014) Brain source localization techniques: Evaluation study using simulated EEG data. In: 2014 IEEE Conference on Biomedical Engineering and Sciences (IECBES).

Hyder, R. and Kamel, N. and Tang, T.B. and Bornot, J. (2014) Brain source localization techniques: Evaluation study using simulated EEG data. In: UNSPECIFIED.

Ibrahim, N. and Ahmad, W.F.W. and Shafie, A. (2014) A preliminary study on local folktales exposures to support the development of animated courseware. In: UNSPECIFIED.

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Microstructure and hardness of high temperature gas nitrided aisi 420 martensitic stainless steel. In: UNSPECIFIED.

Ibrahim, Norshahila and Ahmad, Wan Fatimah Wan (2014) A preliminary study on local folktales exposures to support the development of animated courseware. In: Computer and Information Sciences (ICCOINS), 2014 International Conference on.

Ibrahim, R.B. and Mohd, S.H.S.B. and Khir, H.B.M. and Zakariya, M.A.B. and Daud, H. (2014) Powering LED from Wi-Fi: A qualitative assessment for rectenna design. In: UNSPECIFIED.

Imran Gulcharan, N.F.B. and Daud, H. and Nor, N.M. and Ibrahim, T. and Shamsudin, M.Z. (2014) Investigation of stability and reliability of the patient's wireless temperature monitoring device. In: UNSPECIFIED.

Indra, Z. and Zamin, N. and Jaafar, J. (2014) A clustering technique using single pass clustering algorithm for search engine. In: UNSPECIFIED.

Iqbal, M.J. and Faye, I. and Said, A.M. and Samir, B.B. (2014) An efficient computational intelligence technique for classification of protein sequences. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Hung, N.T. (2014) Analysis of bearing outer race defects in induction motors. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Hung, N.T. (2014) A non invasive fault diagnosis system for induction motors in noisy environment. In: UNSPECIFIED.

Irfan Shirazi, M. and Ahmad, F. and Rafi Raza, M. and Muhsan, A.S. and Omer, M.A. and Aslam, M. (2014) Orientation of carbon fibers in copper matrix produced by powder injection molding. In: UNSPECIFIED.

Irshad, K. and Habib, K. and Thirumalaiswamy, N. (2014) Energy and cost analysis of photo voltaic trombe wall system in tropical climate. In: UNSPECIFIED.

Irshad, S. and Rambli, D.R.A. (2014) User experience evaluation of mobile AR services. In: UNSPECIFIED.

Islam, B.U. and Baharudin, Z. and Raza, M.Q. and Nallagownden, P. (2014) Optimization of neural network architecture using genetic algorithm for load forecasting. In: UNSPECIFIED.

Ismael, M.A. and Heikal, M.R. and Baharom, M.B. (2014) Spray-wall impingement of diesel-CNG dual fuel jet using schlieren imaging technique. In: UNSPECIFIED.

Ismail, A. and Awang, M. (2014) Surface hardness of friction stir welded AA6063 pipe. In: UNSPECIFIED.

Ismail, M.T. and Mamat, S.S. and Hamzah, F.M. and Karim, S.A.A. (2014) Forecasting performance of denoising signal by Wavelet and Fourier Transforms using SARIMA model. In: UNSPECIFIED.

Jaal, R.A. and Ismail, M.C. and Ariwahjoedi, B. (2014) A review of CO2 corrosion inhibition by imidazoline-based inhibitor. In: UNSPECIFIED.

Jamaluddin, Mohd Affiq and Liew, M. S. and Kurian, V.J. (2014) RESPONSE OF MONOPOD PLATFORM UNDER EXTREME WAVE IN MALAYSIAN WATER. In: The 2nd International Conference on Civil, Offshore and Environmental Engineering 2014.

Jamaludin, N. and Khamidi, M.F. and Wahab, S.N.A. and Klufallah, M.M.A. (2014) Indoor Thermal Environment in Tropical Climate Residential Building. In: UNSPECIFIED.

Jamil, M.U. and Noor, M.N. and Raza, M.Q. and Rizvi, S. (2014) Backstepping control using adaptive neural network for industrial two link robot manipulator. In: UNSPECIFIED.

Jamil, N.F.B. and Faye, I. and May, Z. (2014) HEp-2 cell images classification based on statistical texture analysis and fuzzy logic. In: UNSPECIFIED.

Jan, M.T. and Hamid, N.H.B. and Md Khir, M.H.B. and Shoaib, M. and Mirza, A. (2014) Influence of crack growths on the performances of cantilever based MEMS devices: Design and simulations. In: UNSPECIFIED.

Janjua, U.I. and Oxley, A. and Jaafar, J.B. (2014) Classification of software project risk managers: Established on roles and responsibilities. In: UNSPECIFIED.

Japper-Jaafar, A. and Bhaskoro, P. and Sariman, M.Z. and Rozlee, R. (2014) Rheological investigation on the effect of shear and time dependent behavior of waxy crude oil. In: UNSPECIFIED.

Jatoi, M.A. and Kamel, N. and Ousta, F. and Gardezi, S.J.S. (2014) Field theory analysis for wireless infrared system's error correction. In: UNSPECIFIED.

Javaid, M.Y. and Ovinis, M. and Nagarajan, T. and Hashim, F.B.M. (2014) Underwater gliders: A review. In: UNSPECIFIED.

Javed, E. and Faye, I. and Malik, A.S. and Abdullah, J.M. (2014) Reference-free reduction of ballistocardiogram artifact from EEG data using EMD-PCA. In: UNSPECIFIED.

Javed, Ehtasham and Faye, Ibrahima and Malik, Aamir Saeed and Abdullah, Jafri Malin (2014) Reference-free Reduction of Ballistocardiogram Artifact from EEG Data Using EMD-PCA. In: 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014.

Jilani, M.T. and Wen, W.P. and Zakariya, M.A. and Cheong, L.Y. (2014) Dielectric method for determination of fat content at 1 GHz frequency. In: UNSPECIFIED.

Joo-On, Ooi and Hussin, Fawnizu Azmadi (2014) Evaluation and performance analysis of heterogeneous multicore cluster processor architecture. In: IET International Conference on Frontiers of Communications, Networks and Applications (ICFCNA 2014), 3-5 November 2014, Kuala Lumpur Malaysia.

Jung, L.T. and Mu'Azu, A.A. (2014) Bee inspired QoS routing in VANET. In: UNSPECIFIED.

Kadhim, S.K. and Nasif, M.S. and Al-Kayiem, H.H. and Thirumalaiswany, N. and Waked, R.A. (2014) Effect of induced vibration on the blood flow properties in a mechanical aortic valve. In: UNSPECIFIED.

Kadry, H. and Zakaria, N. and Cheong, L.Y. (2014) Mutual entropy of a single Cooper pair-box interacting with multi-photon field. In: UNSPECIFIED.

Kajo, I. and Malik, A.S. and Kamel, N. (2014) An adaptive motion estimation algorithm for irregular motion of objects. In: UNSPECIFIED.

Kajo, Ibrahim and Malik, Aamir Saeed and Kamel , Nidal (2014) An Adaptive Motion Estimation Algorithm for Irregular Motion of Objects. In: 18th IEEE International Symposium on Consumer Electronics, ISCE 2014.

Kakooei, S. and Ismaila, M.C. and Ari-Wahjoedia, B. (2014) Electrodeposition of iridium oxide by cyclic voltammetry: Application of response surface methodology. In: UNSPECIFIED.

Kalai Chelvam, Y. and Zamin, N. (2014) M3DITRACK3R: A design of an automated patient tracking and medicine dispensing mobile robot for senior citizens. In: UNSPECIFIED.

Kalwar, S.A. and Elraies, K.A. and Memon, M.K. and Kumar, S. and Abbas, G. and Mithani, A.H. (2014) A new approach to ASP flooding in high saline and hard carbonate reservoirs. In: UNSPECIFIED.

Kamal, S. and Kumar, C.V. and Abdul-Rani, A.M. (2014) Hot corrosion studies in coal fired boiler environment. In: UNSPECIFIED.

Kannabiran, G. and Dominic, P.D.D. and Sarata, A.V. (2014) Career anchors and employee retention-an empirical study of Indian IT industry. In: UNSPECIFIED.

Karim, M.F.A. and Ismail, M.C. and Awang, M. (2014) Laboratory deposition apparatus to study the effects of wax deposition on pipe magnetic field leakage signals. In: UNSPECIFIED.

Karim, Z.A.A. and Khan, M.Y. and Aziz, A.R.A. and Tan, I.M. (2014) Characterization of water in diesel emulsion. In: UNSPECIFIED.

Keong, W.T. and Ahmad, F. and Sharif, S. and Moinser, M.A. (2014) Evaluate of the effects of drilling with varying spindle speed using different thickness of GFRP on the damage factor. In: UNSPECIFIED.

Khahro, S.H. and Matori, A.N. and Chandio, I.A. and Talpur, M.A.H. (2014) Land suitability analysis for installing new petrol filling stations using GIS. In: UNSPECIFIED.

Khairuddin, R.N.H.R. and Malik, A.S. and Kamel, N. (2014) EEG topographical maps analysis for 2D and 3D video game play. In: UNSPECIFIED.

Khan, A. and Ali, S.S.A. and Omer, M. and Raza, K. (2014) Real-time automatic target detection and tracking using visual feedback. In: UNSPECIFIED.

Khan, A.A. and Basri, S. and Dominic, P.D.D. (2014) Communication risks in GSD during RCM: Results from SLR. In: UNSPECIFIED.

Khan, A.M. and Jeoti, V. and Zakariya, M.A. (2014) Pilot based Pre FFT channel estimation for OFDM systems in rayleigh-fading channel. In: UNSPECIFIED.

Khan, J. and Malik, A.S. and Azura, M.A. and Kamel, N. and Dass, S.C. (2014) Compensation for specular illumination in acne patients images using median filter. In: UNSPECIFIED.

Khan, J. and Malik, A.S. and Kamel, N. and Das, S.C. and Affandi, A.M. (2014) Recovery of color loss due to specular illumination in Acne patient images. In: UNSPECIFIED.

Khan, Javed and Malik, Aamir Saeed and Azura, Mohammad Afandi and Kamel , Nidal and Dass, Sarat Chandra (2014) Compensation for Specular Illumination in Acne Patients Images Using Median Filter. In: 2014 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014.

Khan, M.A. and Hasbullah, H. and Nazir, B. (2014) Recent open source wireless sensor network supporting simulators: A performance comparison. In: UNSPECIFIED.

Khan, M.A. and Hasbullah, H. and Nazir, B. and Khan, M.A. (2014) Lifetime and coverage maximization technique for mobile sensor networks. In: UNSPECIFIED.

Khan, M.B. and Nisar, H. and Ng, C.A. and Salih, Y. and Malik, A.S. (2014) Segmentation assessment of activated sludge flocs at different magnifications for wastewater treatment. In: UNSPECIFIED.

Khan, M.T. and Zakariya, M.A. and Saad, M.N.M. and Baharudin, Z. and Ur Rehman, M.Z. (2014) Analysis and realization of defected ground structure (DGS) on bandpass filter. In: UNSPECIFIED.

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. and Tan, I.M. (2014) Performance and emission assessment of multi cylinder diesel engine using surfactant enhanced water in diesel emulsion. In: UNSPECIFIED.

Khanifar, A. and Onur, M. and Darman, N. (2014) New experimental correlations to predict water-oil relative permeability curves affected from asphaltene deposition. In: UNSPECIFIED.

Kheong, C.W. and Drieberg, M. and Jeoti, V. (2014) Adaptive ready-to-send and blocking notification (RSBN) scheme in wireless ad hoc networks. In: UNSPECIFIED.

Khoa, T.H. and Vasant, P.M. and Singh, M.S.B. and Dieu, V.N. (2014) Swarm based mean-variance mapping optimization (MVMOs) for economic dispatch problem with valve-Point effects. In: UNSPECIFIED.

Khor, C.S. and Lee, T.F. and Nhlapo, D. and Lau, K.K. (2014) Optimal synthesis of ethylene production process. In: UNSPECIFIED.

Klufallah, M.M.A. and Nuruddin, M.F. and Khamidi, M.F. and Jamaludin, N. (2014) Assessment of Carbon Emission Reduction for Buildings Projects in Malaysia-A Comparative Analysis. In: UNSPECIFIED.

Koh, W.S. and Muthuvalu, M.S. and Aruchunan, E. and Sulaiman, J. (2014) Valuing option on the maximum of two assets using improving modified Gauss-Seidel method. In: UNSPECIFIED.

Korada, V.S. and Ovinis, M. and Hassan, S.B. (2014) Natural convection-radiation from a vertical base-fin array with emissivity determination. In: UNSPECIFIED.

Kumar, A. and Yusoff, W.I.W. and Asirvadam, V.S. and Dass, S.C. (2014) Integrated analysis of well logs and seismic data for reservoir characterization to estimate hydrocarbon. In: UNSPECIFIED.

Kumar, S. and Awang, M. and Abbas, G. and Kalwar, S.A. (2014) Wormlike micelles as a substitute of polymeric mobility control agent: Rheological comparison. In: UNSPECIFIED.

Kumar, S. and Awang, M. and Abbhas, G. and Farouque, K. and Ahmed, S. (2014) Simulation protocol for core flooding: Relative permeability and capillary pressure analysis. In: UNSPECIFIED.

Kurian, V.J. and Al Yacouby, A. M. and Sebastian, A.A. and Liew, M. S. (2014) Hydrodynamic Coefficients for Array of Tubular Cylinders. In: ISOPE 2014, 15-20 June 2014, Busan, Korea.

Kurian, V.J. and Al-Yacouby, A.M. and Sebastian, A.A. and Liew, M.S. and Idichandy, V.G. (2014) Hydrodynamic coefficients for array of tubular cylinders. In: UNSPECIFIED.

Kurian, V.J. and Sebastian, A.A. and Al Yacouby, A. M. and Liew, M. S. (2014) Experimental Investigation of Hydrodynamic Force Coefficients on Rigid Vertical Cylinders. In: IEEE Colloquium on Humanities, Science and Engineering 2014, 7-9 April 2014, Penang.

Kurian, V.J. and Wahab, M.M.A. and Goh, S.S. and Liew, M. S. (2014) Met-ocean Study for Reliability of Jacket Platform Regression Analysis. In: IEEE Colloquium on Humanities, Science and Engineering 2014, 7-9 April 2014, Penang.

Kurian, V.J. and Wahab, M.M.A. and Voon, M.C. and Liew, M. S. (2014) Pushover Analysis for Jacket Platform Sensitivity Study and Safety Ratios. In: IEEE Colloquium on Humanities, Science and Engineering 2014, 7-9 April 2014, Penang.

Kurian, V.J. and al-yacouby, A.M. and Sebastian, A.A. and Liew, M. S. (2014) Experimental and Theoretical Investigation of Wave Forces on Rigid Vertical Cylinders. In: IEEE Colloquium on Humanities, Science and Engineering 2014, 7-9 April 2014, Penang.

Kwong, A.C.K. and Drieberg, M. and Lai, F.-W. (2014) Route optimization of feeder bus for Electric Train Service. In: UNSPECIFIED.

Lai, Fong Woon (2014) A Conceptual Framework for Enterprise Risk Management performance measure through Economic Value Added. In: International Conference on Leadership and Management - ICLM 2014,.

Lai, Fong Woon (2014) A Conceptual Framework of a Travel Demand Modeling for a Public Transport System. In: International Conference on Leadership and Management - ICLM 2014.

Lai, Fong Woon (2014) An Ensembel Model for Modelling Chaotic Behaviour of Bursa Malaysia Time Series Data. In: The 21st International Conference on Neural Information Processing, ICONIP 2014.

Lai, Fong Woon (2014) Enterprise Risk Management and its Value Creation Transmission Mechanism. In: 2nd International Conference on Business Administration, Marketing and Economics.

Lai, Fong Woon (2014) Route Optimization of Feeder Bus for Electric Train Service. In: 5th International Conference on Intelligent & Advanced Systems - ICIAS 2014, (ESTCON 2014),.

Lawal, I.A. and Said, A.M. and Nisar, K. and Mu'Azu, A.A. and Shah, P.A. (2014) Throughput enhancement for fixed WiMAX network using distributed model. In: UNSPECIFIED.

Lee, Hsiu Eik and Liew, M. S. (2014) A Study on the Structural Failure Mechanism and Reserve Strength Ratio of Tarpon Monopods. In: The 2nd International Conference on Civil, Offshore and Environmental Engineering 2014.

Lee, X.Y. and Khan, M.B. and Nisar, H. and Ho, Y.K. and Ng, C.A. and Malik, A.S. (2014) Morphological analysis of activated sludge flocs and filaments. In: UNSPECIFIED.

Lee, Xue Yong and Khan, Muhammad Burhan and Nisar, Humaira and Yeap, Kim Ho and Ng, Choon Aun and Malik, Aamir Saeed (2014) Morphological analysis of activated sludge flocs and filaments. In: IEEE International Instrumentation and Measurement Technology Conference: Instrumentation and Measurement for Sustainable Development, I2MTC 2014.

Li, L.S. and Yahya, N. (2014) Face recognition technique using Gabor wavelets and Singular Value Decomposition (SVD). In: UNSPECIFIED.

Lias, M.R. and Awang, M. and Rao, T.V.V.L.N. and Ahmad, M.F.A. and Patil, S. (2014) Evaluation of spur gear pair on tooth root bending stress in radial misalignment contact condition. In: UNSPECIFIED.

Lim, Y.H. and Xia, L. (2014) A low power biopotential amplifier in 0.35um CMOS for portable EEG signal amplification. In: UNSPECIFIED.

Lim , Lam Ghai and Hisham, Suhaila Badarol and Yahya, Norashikin (2014) Automatic Assessment Mark Entry System Using Local Binary Pattern (LBP) and Salient Structural Features. In: 4th IEEE International Conference on Control Systems, Computing and Engineering (ICCSCE 2014), 28-30 November, Penang.

Lim , Lam Ghai and Yahya, Norashikin and Badarol Hisham, Suhaila (2014) Automatic assessment mark entry system using local binary pattern (LBP) and salient structural features. In: International Conference on Control System, Computing & Engineering (ICCSCE) 2014, 28-30 Nov 2014, Penang, Malaysia.

Lim , Song Li and Yahya, Norashikin (2014) Face Recognition Technique using Gabor Wavelets and Singular Value Decomposition (SVD). In: 4th IEEE International Conference on Control Systems, Computing and Engineering (ICCSCE 2014), 28-30 November, Penang.

Ling, L.W. and Ahmad, W.F.W. and Singh, T.K.R. (2014) Effects of the smart board on students' achievement in moral education. In: UNSPECIFIED.

Ling, Loh Wai and Ahmad, Wan Fatimah Wan and Singh, Termit Kaur Ranjit (2014) Effects of the smart board on students' achievement in moral education. In: Computer and Information Sciences (ICCOINS), 2014 International Conference on.

Ling, Loh Wai and Ahmad, Wan Fatimah Wan and Singh, Termit Kaur Ranjit (2014) Effects of the smart board on students' achievement in moral education. In: Computer and Information Sciences (ICCOINS), 2014 International Conference on.

Lubis, L.A. and Ghosh, D.P. and Harith, Z.Z.T. (2014) Carbonate pore type classification by using digital rock images with a rock physics model, offshore Sarawak. In: UNSPECIFIED.

Madni, T.M. and Nayan, Y.B. and Sulaiman, S.B. and Tahir, M. and Iqbal, M. (2014) Design of interactive whiteboard system for collaborative learning. In: UNSPECIFIED.

Magee, A. and Yunos, N.Z.M. and Kurian, V.J. (2014) Model testing capabilities for verification of floatover operations. In: UNSPECIFIED.

Magee, A.R. and Yunos, N.Z.M. and Kurian, V.J. (2014) Model Testing Capabilities for Verification of Floatover Operations. In: ISOPE 2014, 15-20 June 2014, Busan, Korea.

Magzoub, M.A. and Saad, N.B. and Ibrahim, R.B. and Maharun, M. and Zulkifli, S.A. (2014) Hybrid fuzzy-fuzzy controller for PWM-driven induction motor drive. In: UNSPECIFIED.

Maharun, M. and Mohd Nor, M.N.I. (2014) A study of torque vectoring and traction control for an all-wheel drive electric vehicle. In: UNSPECIFIED.

Mahmoud, H.R.S. and Yusoff, S.A. and Zainuddin, A. and Hussain, P. and Ismail, M. and Abidin, K. (2014) Effective duration of gas nitriding process on AISI 316L for the formation of a desired thickness of surface nitrided layer. In: UNSPECIFIED.

Mahmud, A.M. and Kahsay, M.B. and Hailesilasie, A. and Hagos, F.Y. and Gebray, P. and Kelele, H.K. and Gebrehiwot, K. and Bauer, H. and Deckers, S. and De Baerdemaeker, J. and Driesen, J. (2014) Solar energy resource assessment of the geba catchment, Northern Ethiopia. In: UNSPECIFIED.

Majid, M.A.A. (2014) Techno-economic assessment of redundancy systems for a cogeneration plant. In: UNSPECIFIED.

Majid, M.A.A. and Sulaiman, S.A. and Fujii, T. and Naono (2014) Studies on steam absorption chillers performance at a cogeneration plant. In: UNSPECIFIED.

Major, R.P. (2014) Early meteoric diagenesis and porosity preservation: Stratigraphie traps in carbonate grainstones. In: UNSPECIFIED.

Malakahmad, A. and Md Bakri, P. and Md Mokhtar, M.R. and Khalil, N. (2014) Solid waste collection routes optimization via GIS techniques in Ipoh city, Malaysia. In: UNSPECIFIED.

Malik, A.S. and Ramli, R. and Hani, A.F.M. and Salih, Y. and Yap, F.B.-B. and Nisar, H. (2014) Digital assessment of facial acne vulgaris. In: UNSPECIFIED.

Malik, Aamir Saeed and Ramli, Roshaslinie and Hani, Ahmad Fadzil M and Salih, Yasir and Yap, Felix Boon-Bin and Nisar, Humaira (2014) Digital Assessment of Facial Acne Vulgaris. In: 2014 IEEE International Instrumentation and Measurement Technology Conference: Instrumentation and Measurement for Sustainable Development, I2MTC 2014.

Malik, M.S.A. and Sulaiman, S. (2014) Analytical comparison of knowledge based traits of DBAs for information visualization in multiple electronic health records. In: UNSPECIFIED.

Malik, T.S. and Hasbulah, H.B. (2014) QoS routing for Cognitive Radio Ad-Hoc Networks: Challenges & issues. In: UNSPECIFIED.

Maoinser, M.A. and Ahmad, F. and Sharif, S. and Keong, W.T. (2014) Minimizing drilling thrust force for HFRP composite by optimizing process parameters using combination of ANOVA Approach and S/N ratios analysis. In: UNSPECIFIED.

Maran , Marimuthu and Hassan, Rohail and Johl, S.K. (2014) Diversity, Corporate Governance and Implication on Firm Financial Performance: A Concept Paper. In: The International Conference on Leadership and Management (ICLM), 3-5 June 2014, Kuala Lumpur.

Maran , Marimuthu and Hassan, Rohail and Satirenjit , Kaur Johl (2014) Diversity, Corporate Governance and Implication on Financial Performance. In: International Conference on Leadership and Management (ICLM 2014), 3-5 June 20114, KL Convention Centre.

Maran , Marimuthu and lawrence, A and Lai, Fong Woon and Rani, B (2014) Determinants of Individual and Organizational Factors to the Career Advancement of Academics in Private Higher Education: A Literature Review. In: International Conference on Leadership and Management - ICLM 2014, 3-5 June 2014, KL Convention Centre. (Unpublished)

Marimuthu, Maran (2014) An Ensembel Model for Modelling Chaotic Behaviour of Bursa Malaysia Time Series Data. In: 21st International Conference on Neural Information Processing, 3-6 November 2014, University Of Malaysia (UM), Kuching, Sarawak. (Unpublished)

Marimuthu, Maran (2014) Financial Analysis and Insolvency Profile of the Malaysian SMEs. In: International Business, Education and Cultural Development Conference, 19-21 July 2014, Syuen Hotel, Ipoh, Perak. (Unpublished)

Marimuthu, Maran and Lawrence, A and Lai, Fong Woon (2014) Size Effect and Insolvency Profiles among the SMEs: An Empirical Investigation. In: International Conference on Leadership and Management (ICLM 2014), 3-5 June 20114, KL Convention Centre.

Marimuthu, Maran and Majid, S. and Satirenjit , Kaur Johl (2014) An Overview of Sustainable Corporate Entrepreneurship and Firm Performance. In: International Conference on Leadership and Management (ICLM 2014), 3-5 June 20114, KL Convention Centre. (Unpublished)

Matori, A.N. and Lawal, D.U. and Yusof, K.W. and Hashim, M.A. and Balogun, A.-L. (2014) Spatial analytic hierarchy process model for flood forecasting: An integrated approach. In: UNSPECIFIED.

Memon, A.H. and Ibrahim, T.B. and Perumal, N. (2014) Portable and pico-scale linear generator for wave energy conversion. In: UNSPECIFIED.

Memon, P.Q. and Yong, S.-P. and Pao, W. and Sean, P.J. (2014) Surrogate reservoir modeling-prediction of Bottom-Hole Flowing Pressure using Radial Basis Neural Network. In: UNSPECIFIED.

Memon, P.Q. and Yong, S.-P. and Pao, W. and Seanl, P.J. (2014) Prediction of Bottom-Hole Flowing Pressure using general regression neural network. In: UNSPECIFIED.

Mengal, A.N. and Karuppanan, S. and Wahab, A.A. (2014) Structural analysis of basalt fiber reinforced plastic wind turbine blade. In: UNSPECIFIED.

Mian, MU and Dennis, JO and Khir, MH Md and Tang, TB and Sutri, NY (2014) Noise and Bandwidth analysis for PMOS based wide swing cascode current mirror using 0.35 um CMOS-MEMS technology. In: 2014 5th International Conference on Intelligent and Advanced Systems (ICIAS).

Mian, M.U. and Dennis, J.O. and Khir, M.H.Md. and Tang, T.B. and Sutri, N.Y. (2014) Noise and Bandwidth analysis for PMOS based wide swing cascode current mirror using 0.35 um CMOS-MEMS technology. In: UNSPECIFIED.

Miskam, M.A. and Hassan, S. and Alauddin, Z.A.Z. and Ishak, M.Z. (2014) Characterization of catalytic porous medium using platinum for micro-combustion application. In: UNSPECIFIED.

Moayedfar, M. and Bin Abdul Rani, A.M. and Salehi, P. and Narasimha Rao Tad, V.V.L. (2014) Comparative study between programming systems for incremental sheet forming process. In: UNSPECIFIED.

Mohamad Sazali, S.F.B. and Ovinis, M. (2014) Design of a hyperbaric chamber for pressure testing. In: UNSPECIFIED.

Mohamed, Eltaf Abdalsalam and Yusoff, Mohd Zuki and Kamel, Nidal and Malik, Aamir Saeed and Meselhy, Mohamed (2014) Mental Task Motor Imagery Classifications for Noninvasive Brain Computer Interface. In: 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014.

Mohamed, M. and Sebastian, P. and Hiung, L.H. and Ngiap, S.T.S. (2014) Threading optimization of the AEMB microprocessor. In: UNSPECIFIED.

Mohamed, Shakir and Malik, Aamir Saeed and Kamel , Nidal and Qidwai, Uvais (2014) Rule-Base Wearable Embedded Platform for Seizure Detection from Real EEG Data in Ambulatory State. In: 2014 IEEE Region 10 Symposium, IEEE TENSYMP 2014.

Mohammadreza Tahan, B. and Muhammad, M. and Karim, Z.A.A. (2014) A Framework for intelligent condition-based maintenance of rotating equipment using mechanical condition monitoring. In: UNSPECIFIED.

Mohammed, S.E. and Baharom, M. and Abdul Aziz, A.R. (2014) Comparative analysis of two proposed models of connecting rods for crank-rocker engines using finite element method. In: UNSPECIFIED.

Mohd Muhaiyuddin, N.D. and Awang Rambli, D.R. (2014) Navigation in image-based Virtual Reality as the factor to elicit spatial presence experience. In: UNSPECIFIED.

Mokhlis, M.M. and Baharom, M.B. (2014) Output speed prediction of an overrunning clutch for oscillatory input motion using a simplified approach. In: UNSPECIFIED.

Mokhtar, A.A. and Ismail, M.C. and Zainordin, A.B. and Shahid, S. (2014) A Framework for estimating piping reliability subject to corrosion under insulation. In: UNSPECIFIED.

Moni, M.N.Z. and Sulaiman, S.A. and Hassan, S. (2014) Potentials of selected malaysian biomasses as co-gasification fuels with oil palm fronds in a fixed-bed downdraft gasifier. In: UNSPECIFIED.

Muhammad, M. and Mokhtar, A.A. and Hussin, H. (2014) Reliability assessment of repairable system through expert elicitation. In: UNSPECIFIED.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Yusoff, P.S.M.M. and Raza, M.R. and Afrooz, I.E. (2014) Experimental preparation and numerical simulation of high thermal conductive Cu/CNTs Nanocomposites. In: UNSPECIFIED.

Mukhtar, A. and Xia, L. (2014) Target tracking using color based particle filter. In: UNSPECIFIED.

Mukhtar, M.A.O. and Hassan, M.F.B. and Jaafar, J.B. and Rahim, L.A. (2014) WSDMDA: An enhanced Model Driven Web engineering methodology. In: UNSPECIFIED.

Mulubrhan, F. and Mokhtar, A.A. and Muhammad, M. (2014) Comparative analysis between fuzzy and traditional analytical hierarchy process. In: UNSPECIFIED.

Mustaffa, Z. and Sadek, M.M. and Shitan, M. and Dawotola, A.W. (2014) Top-of-line spatial corrosion prediction in gas pipelines. In: UNSPECIFIED.

Mustaffa, Zahiraniza (2014) TOP-OF-LINE SPATIAL CORROSION PREDICTION IN GAS PIPELINES. In: 33rd International Conference on Ocean, Offshore and Arctic Engineering, June 8-13, 2014, San Francisco, USA.

Mustaffa, Zahiraniza and Sadek, Mohamad Mounes and Shitan, Mahendran and Dawotola, Alex W. (2014) TOP-OF-LINE SPATIAL CORROSION PREDICTION IN GAS PIPELINES. In: 33th International Conference on Ocean, Offshore and Arctic Engineering (OMAE) 2014, June 8-13, 2014, San Francisco, CA.

Muthuvalu, M.S. and Aruchunan, E. and Koh, W.S. and Akhir, M.K.M. and Sulaiman, J. and Karim, S.A.A. (2014) Numerical performance of AOR methods in solving first order composite closed Newton-Cotes quadrature algebraic equations. In: UNSPECIFIED.

Muthuvalu, M.S. and Dass, S.C. and Guan, B.H. and Ching, D.L.C. and Sulaiman, J. (2014) Numerical solutions for linear Fredholm integral equations of the second kind using 2-point half-sweep explicit group method. In: UNSPECIFIED.

Muthuvalu, M.S. and Sulaiman, J. (2014) Performance analysis of Half-Sweep AOR iterative method in solving second kind Linear Fredholm Integral Equations. In: UNSPECIFIED.

Nanimina, A.M. and Abdul Rani, A.M. and Ginta, T.L. (2014) Assessment of powder mixed EDM: A review. In: UNSPECIFIED.

Naqvi, S.A.A. and Badruddin, N. and Malik, A.S. and Hazabbah, W. and Abdullah, B. (2014) EEG alpha power: An indicator of visual fatigue. In: UNSPECIFIED.

Naqvi, Syed Ali Arsalan and Badruddin, Nasreen and Malik, Aamir Saeed and Hazabbah, Wan and Abdullah, Baharudin (2014) EEG Alpha Power: An Indicator of Visual Fatigue. In: 2014 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014.

Nasersharifi, Y. and Assadi, M.K. (2014) Skylight application for natural lighting in a Building; The University of Tehran Branch of Melli Bank case study. In: UNSPECIFIED.

Nasif, M.S. and Hasnain, S.A. and Pao, W. and Al-Waked, R. (2014) Computer simulation investigation on the effect of channelled and unchannelled screens on smoke contamination in atriums upper Balconies. In: UNSPECIFIED.

Nazri, N.I.A.M. and Rambli, D.R.A. (2014) Current limitations and opportunities in mobile augmented reality applications. In: UNSPECIFIED.

Ngah Abdul Wahab, S. and Khamidi, M.F. and Jamaludin, N. (2014) Assessment of mould growth for library buildings in tropical climates. In: UNSPECIFIED.

Ngi, Ing Hong and Drieberg , Micheal and Mahinder Singh, Balbir Singh (2014) Simulation and Hardware Implementation of Solar Energy Harvester for Wireless Sensor Networks. In: IEEE Conference on Systems, Process and Control (ICSPC 2014). (In Press)

Nhon, P.N.Q. and Elamvazuthi, I. and Fayek, H.M. and Parasuraman, S. and Ahamed Khan, M.K.A. (2014) Intelligent control of rehabilitation robot: Auto tuning PIDController with interval type 2 fuzzy for DC servomotor. In: UNSPECIFIED.

Nisar, H. and Yeoh, Q.W. and Balasubramanium, H.C. and Wei, W.T. and Malik, A.S. (2014) Analysis of brain activity while performing cognitive actions to control a car. In: UNSPECIFIED.

Nisar, K. and Lawal, I.A. and Abualsaud, K. and El-Fouly, T.M. (2014) A new WDM Application Response Time in WLAN Network and Fixed WiMAX using Distributed. In: UNSPECIFIED.

Nordin, A. and Abd Majid, M.A. (2014) Economic comparison of power and chilled water generation by cogeneration system and public utility. In: UNSPECIFIED.

Nurhanim, K. and Elamvazuthi, I. and Vasant, P. and Ganesan, T. and Parasuraman, S. and Ahamed Khan, M.K.A. (2014) Joint torque estimation model of surface electromyography(sEMG) based on swarm intelligence algorithm for robotic assistive device. In: UNSPECIFIED.

Nurika, O. and Zakaria, N. and Hassan, F. and Jung, L.T. (2014) Workability review of genetic algorithm approach in networks. In: UNSPECIFIED.

Okitsu, J. and Khamis, M.F.I. and Majid, M.A.A. and Naono, K. and Sulaiman, S.A. (2014) Root cause analysis on changes in chiller performance using linear regression. In: UNSPECIFIED.

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2014) Simulation of the effects of electrolyte concentration on Dye Solar Cell performance. In: UNSPECIFIED.

Olalekan, W.S. and Rashid, A.A. and Baharom, M. (2014) Cycle-by-cycle variations in a direct injection hydrogen enriched compressed natural gas engine employing EGR at relative air-fuel ratios. In: UNSPECIFIED.

Oluwatoyin, S.K. and Hashim, F.M. and Hussin, H.B. (2014) Failure mode and effect analysis of subsea multiphase pump equipment. In: UNSPECIFIED.

Omer, M.A. and Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Pressure distribution in hydrodynamic journal bearing with lubricants additives. In: UNSPECIFIED.

On, O.J. and Hussin, F.A.B. (2014) Evaluation and performance analysis of heterogeneous multicore cluster processor architecture. In: UNSPECIFIED.

Ooi, B.L. and Aziz, A.R.A. and Gilbert, J.M. (2014) Analytical and numerical modelling for dual-resonator vibration-based electromagnetic generator. In: UNSPECIFIED.

Opatola, R.A. and Aziz, A.R.A. and Heikal, M.R. and Said, M.A.M. (2014) A review of the utilisation of natural gas with high carbon dioxide content as automotive fuel in an indirect injection diesel engine. In: UNSPECIFIED.

Osman Ali, Amal Seralkhatem and Asirvadam , Vijanth Sagayan and Malik, Aamir Saeed and Rasheed, Waqas (2014) A combined face, fingerprint authentication system. In: 18th IEEE International Symposium on Consumer Electronics, ISCE 2014.

Otairu, A. and Umar, A.A. and Zawawi, N.A.W.A. and Sodangi, M. and Hammad, D.B. (2014) Slow adoption of PPPs in developing countries: Survey of nigerian construction professionals. In: UNSPECIFIED.

Oxley, A. (2014) Issues affecting the adoption of IPv6. In: UNSPECIFIED.

Pandian, S. (2014) The stats charger. In: UNSPECIFIED.

Pao, W. and Hashim, F.M. and Ming, L.H. (2014) Computational analyses of passive wet gas separation in branched piping. In: UNSPECIFIED.

Pao, W. and Hashim, F.M. and Parman, S. (2014) Modeling of axial spring stiffness in active vibration controlled drilling. In: UNSPECIFIED.

Pao, W.K. and Khan, J.A. (2014) Factors affecting fill removal from horizontal well during colied tubing cleanout operation. In: UNSPECIFIED.

Parman, S. and Ari-Wahjoedi, B. and Ismail, A.J. (2014) Finite element analysis of a four-cylinder four stroke gasoline engine crankshaft. In: UNSPECIFIED.

Parman, S. and MacHmudah, A. and Baharom, M.B. (2014) Zero distribution of system with unknown random variables case study: Avoiding collision path. In: UNSPECIFIED.

Patil, S. and Karuppanan, S. and Atanasovska, I. and Wahab, A.A. and Lias, M.R. (2014) Contact stress analysis for gears of different helix angle using finite element method. In: UNSPECIFIED.

Pau, J.S. and Pao, W.K.S. and Yong, S.P. and Memon, P.Q. (2014) Effects of capillary pressure on multiphase flow during CO2 injection in saline aquifer. In: UNSPECIFIED.

Peyvandi, S. and Ahmad, R. and Zakaria, M.N. (2014) Association among independent and dependent factors of host in volunteer computing. In: UNSPECIFIED.

Prajapati, S. and Ghosh, D. (2014) A simple and fast algorithm to estimate effective anisotropy parameters. In: UNSPECIFIED.

Prajapati, S. and Ghosh, D.P. and Yousoff, W.I.B.W. and Iskandar, B.S. and Perak, T. (2014) Optimization driven model-space approach for gas clouds using full waveform inversion. In: UNSPECIFIED.

Purnomo, W. and Deva, G. (2014) Powering hydrocarbon response of seismic amplitude through high resolution seismic inversion. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Naufal, M. and Saad, M. and Iqbal, M. and Ahmad, R.F. and Abdullah, T.A.R.B.T. (2014) Dynamic programming based comparison including QuickBird and IKONOS satellite stereo images for monitoring vegetation near power poles. In: UNSPECIFIED.

Qidwai, U. and Malik, A.S. and Shakir, M. (2014) Embedded fuzzy classifier for detection and classification of preseizure state using real EEG data. In: UNSPECIFIED.

Qureshi, M.A. and Hassan, M.F. and Sammi, R. (2014) Rationale of students' failure in comprehending theoretical computer science courses. In: UNSPECIFIED.

R. Khairuddin, R. N. Hamizah and Malik, Aamir Saeed and Kamel, Nidal (2014) EEG Topographical Maps Analysis for 2D and 3D Video Game Play. In: 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014.

Rabih, A.A.S. and Dennis, J.O. and Md Khir, M.H. and Abdullah, M.A. (2014) Design, modeling and simulation of CMOS-MEMS resonator for biomedical application. In: UNSPECIFIED.

Radzi, F.N. and Yahya, N. (2014) Evaluation of digital speckle filters for ultrasound images. In: UNSPECIFIED.

Radzi, Fara Nabila and Yahya, Norashikin (2014) Evaluation of Digital Speckle Filters for Ultrasound Images. In: 4th IEEE International Conference on Control Systems, Computing and Engineering (ICCSCE 2014), 28-30 November, Penang.

Rahim, L.A. (2014) Analysis of design patterns in OpenNebula. In: UNSPECIFIED.

Rahim, M.A. and Ramasamy, M. and Tufa, L.D. and Faisal, A. (2014) Iterative closed-loop identification of MIMO systems using ARX-based Leaky Least Mean Square Algorithm. In: UNSPECIFIED.

Rahman, Imran and Vasant, Pandian and Mahinder Singh, Balbir Singh and Abdullah-Al-Wadud, M. (2014) Intelligent energy allocation strategy for PHEV charging station using gravitational search algorithm. In: 3rd International Conference on Fundamental and Applied Sciences (ICFAS2014), June 3-5, 2014, KL Convention Centre, Kuala Lumpur, MALAYSIA.

Raju, S.S.K. and Narahari, M. and Pendyala, R. (2014) Soret and chemical reaction effects on unsteady two-dimensional natural convection along a vertical plate. In: UNSPECIFIED.

Ramachandran, T. and Ponnusamy, V. and Jung, L.T. and Hudaya, A. (2014) ZigBee wireless communication for monitoring renewable street light system. In: UNSPECIFIED.

Ramanathan, C.T. and Narayanan, S.P. (2014) A comparative study among stakeholders on causes of time delay in Malaysian multiple design and build projects. In: UNSPECIFIED.

Ramasamy, R. and Tuan Ya, T.M.Y.S. (2014) Installation capacity assessment of damaged deepwater pipelines. In: UNSPECIFIED.

Rambli, D.R.A. and Muhaiyuddin, N.D.M. (2014) Story line in image-based Virtual Reality for enhancing spatial presence experience. In: UNSPECIFIED.

Ramli, A. and Ahmed, S. and Yusup, S. (2014) Adsorption behaviour of Si-MCM-41 for C02: Effect of pressure and temperature on adsorption. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Awang, M. and Lias, M.R. and Rani, A.M.A. (2014) Nonlinear analysis of spur gear pair with time-varying mesh stiffness. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of two-layered journal bearing lubricated with ferrofluid. In: UNSPECIFIED.

Rasheed, Waqas and Tang, Tong Boon and Hamid, Nor Hisham Bin (2014) Novel framework for small-world network connectivity analysis for MEG data. In: 2014 5th International Conference on Intelligent and Advanced Systems (ICIAS).

Rasheed, W. and Tang, T.B. and Hamid, N.H.B. (2014) Novel framework for small-world network connectivity analysis for MEG data. In: UNSPECIFIED.

Ratnam, K.A. and Dominic, P.D.D. (2014) Adoption of cloud computing to enhance the healthcare services in Malaysia. In: UNSPECIFIED.

Raza, M.Q. and Baharudin, Z. and Nallagownden, P. and Badar-Ul-Islam (2014) A comparative analysis of PSO and LM based NN short term load forecast with exogenous variables for smart power generation. In: UNSPECIFIED.

Rehan, M. and Hasbullah, H. and Chughtai, O. and Rehan, W. (2014) ZLS: A next-door lightweight QoS aware location service technique for VANET on highways. In: UNSPECIFIED.

Rehman, M. and Mahmood, A.K. and Salleh, R. and Amin, A. (2014) Work design characteristics and knowledge sharing behavior among Software Engineers. In: UNSPECIFIED.

Reshid, M.N. and Majid, M.A.A. and Muhammad, M. (2014) Evaluation of redundancy for power generating unit in a cogeneration power plant. In: UNSPECIFIED.

Reshid, Maseret Nasir and Abd Majid, Mohd Amin and Muhammad, Masdi (2014) Evaluation of Redundancy for Power Generating Unit in a Cogeneration Power Plant. In: MATEC Web of Conference 13,03010(2014).

Ridha, S. and Wardaya, P.D. (2014) Oil spill detection and characterization from satellite image using artificial neural network algorithm. In: UNSPECIFIED.

Ridha, S. and Yerikania, U. (2014) Geopolymer cement slurries with enhanced mechanical and physical properties for oilwell cementing. In: UNSPECIFIED.

Rizvi, S. and Saad, N.M. (2014) A Multi-homing Seamless Vertical Handoff Protocol for integrated UMTS/WLAN network. In: UNSPECIFIED.

Romlie, M.F. and Rashed, M. and Klumpner, C. and Asher, G.M. (2014) An analysis of efficiency improvement with the installation of energy storage in power systems. In: UNSPECIFIED.

Rosli, M.A. and Yahaya, N.Z. and Baharudin, Z. (2014) Multi-input DC-DC converter for hybrid renewable energy generation system. In: UNSPECIFIED.

Rosli, M.A. and Yahaya, N.Z. and Baharudin, Z. (2014) A multi-input converter for hybrid photovoltaic array/wind turbine/fuel cell and battery storage system connected AC grid network. In: UNSPECIFIED.

Rosli, N.S. and Ibrahim, R. (2014) Real-time implementation of model predictive control for flow control application. In: UNSPECIFIED.

Rosli, N.S. and Ibrahim, R. and Hung, N.T. and Ismail, I. (2014) Intelligent fault diagnosis for instrument in gas transportation system. In: UNSPECIFIED.

Rubab, S. and Hassan, M.F.B. and Mahmood, A.K.B. and Shah, N.M. (2014) A review on resource availability prediction methods in volunteer grid computing. In: UNSPECIFIED.

Saaban, A. and Kherd, A.S. and Man, N.H. and Karim, S.A.A. (2014) Construction of cubic Ball surface based on biharmonic partial differentiation equation. In: UNSPECIFIED.

Saand, A.S. and Jeoti, V. and Saad, M.N.M. (2014) Relay precoding for dual-hop MIMO network using per antenna SLNR maximization. In: UNSPECIFIED.

Sabet, M. and Soleimani, H. (2014) Mechanical and electrical properties of low density polyethylene filled with carbon nanotubes. In: UNSPECIFIED.

Sabir, O. and Tuan Ya, T.M.Y.S. (2014) A new artificial neural network approach for fluid flow simulations. In: UNSPECIFIED.

Sadig, H. and Sulaiman, S.A. and Said, M.A. (2014) Effect of syngas moisture content on the emissions of micro-gas turbine fueled with syngas/LPG in dual fuel mode. In: UNSPECIFIED.

Sagir, M. and Tan, I.M. and Mushtaq, M. and Nadeem, M. (2014) Novel CO2 philic surfactants for CO2 mobility control for enhanced oil recovery applications. In: UNSPECIFIED.

Sagir, M. and Tan, I.M. and Mushtaq, M. and Talebian, S.H. (2014) FAWAG using CO2 philic surfactants for CO2 mobility control for enhanced oil recovery applications. In: UNSPECIFIED.

Saini, S. and Rambli, D.R.B.A. and Sulaiman, S.B. and Zakaria, M.N.B. (2014) Hierarchical approach for articulated 3D human motion tracking using PF-based PSO. In: UNSPECIFIED.

Saleem, M.Q. and Jaafar, J. and Hassan, M.F. (2014) Model driven software development: An overview. In: UNSPECIFIED.

Salleh, S.N.M. and Abdullah, M.Z. and Wahab, A.A. (2014) Chemical and physical characterization of stabilized polyacrylonitrile (pan) fiber. In: UNSPECIFIED.

Salleh, S.N.M. and Abdullah, M.Z. and Wahab, A.A. (2014) Chemical characterization of stabilized and carbonized polyacrylonitrile (pan) fibers treated with oleic acid. In: UNSPECIFIED.

Sambu Potty, Narayanan and Kang , Seavhai (2014) COMPARATIVE STUDY OF ROOF WIND PRESSURES FOR PERMEABLE BUILDINGS. In: 2014 IEEE Colloquium on Humanities, Science and Engineering (CHUSER 2014), 7 - 8 April 2014, Penang Malaysia.

Sambu Potty, Narayanan and Kang , Seavhai (2014) ROOF WIND PRESSURES FOR DUOPITCH ROOF PERMEABLE BUILDINGS. In: CHUSER 2014 , 7 - 8 April 2014, Penang Malaysia.

Sambu Potty, Narayanan and Redzuan Abdul Hamid, Mohd (2014) Evaluation Of Multi Storey Structures In Malaysia. In: ICCOEE2014, June 3-5, 2014, KLCC Kuala Lumpur.

Sambu Potty, Narayanan and Seavhai, Kang (2014) Evaluation of Roofing Systems in Malaysia Based on MS 1553, BS 6399, EC1-1-4 and IS 875 Wind Codes. In: ICCOEE2014, June 3- 5 , 2014, KLCC Kuala Lumpur Malaysia.

Sarwar, U. and Muhammad, M.B. and Abdul Karim, Z.A. (2014) Time series method for machine performance prediction using condition monitoring data. In: UNSPECIFIED.

Satti, I.A. and Ghosh, D. and Yusoff, W.I.W. and Hoesni, M.J. (2014) Analysis of overpressure mechanisms in a field of southwestern Malay Basin. In: UNSPECIFIED.

Savita, K.S. and Dominic, P.D.D. and Ramayah, T. (2014) The adoption of green information technologies and systems as a driver within green SCM. In: UNSPECIFIED.

Sethi, Muhammad Athar Javed and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2014) Bio-inspired NoC fault tolerant techniques. In: International Conference On Intelligent & Advanced Systems (ICIAS 2014), 3-5 June 2014, Kuala Lumpur, Malaysia.

Setvati, M.R. and Shafiq, N. and Mustaffa, Z. and Syed, Z.I. (2014) A review on composite materials for offshore structures. In: UNSPECIFIED.

Setvati, Mahdi Razavi and Mustaffa, Zahiraniza and Shafiq, Nasir and Syed, Zubair (2014) A REVIEW ON COMPOSITE MATERIALS FOR OFFSHORE STRUCTURES. In: OMAE 2014.

Shafquet, A. and Ismail, I. and Jaafar, A. (2014) Modeling and simulation of multi-plane Electrical Capacitance Tomography sensor for flow imaging by using Finite Element Analysis. In: UNSPECIFIED.

Shah, P.A. and Hasbullah, H.B. and Rafique, S. and Rehman, S.U. and Jung, L.T. (2014) Fuzzy logic based link status classification for efficient multipath routing in multi-hop wireless mesh networks. In: UNSPECIFIED.

Shaheen, A.-U.-R. and Hussin, F.A. and Hamid, N.H. and Ali, N.B.Z. (2014) Automatic generation of test instructions for path delay faults based-on stuck-at fault in processor cores using assignment decision diagram. In: UNSPECIFIED.

Shaheen, Ateeq-Ur-Rehman and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham and Zain Ali, Noohul Basheer (2014) Automatic generation of test instructions for path delay faults based-on stuck-at fault in processor cores using assignment decision diagram. In: 5th International Conference On Intelligent & Advanced Systems (ICIAS 2014), 3-5 June 2014, Kuala Lumpur Malaysia.

Shahid, A. and Kamel, N. and Malik, A.S. (2014) Singular values as a detector of epileptic seizures in EEG signals. In: UNSPECIFIED.

Shahid, Arslan and Kamel , Nidal and Malik, Aamir Saeed (2014) Singular Values as a Detector of Epileptic Seizures in EEG Signals. In: 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014.

Shahzad, A. and Saad, N.M. and Walter, N. and Malik, A.S. and Meriaudeau, F. (2014) An efficient method for subcutaneous veins localization using Near Infrared imaging. In: UNSPECIFIED.

Shahzad, Aamir and Saad, N.M. and Nicolas, Walter and Malik, Aamir Saeed and Meriaudeau, Fabrice (2014) An Efficient Method for Subcutaneous Veins Localization Using Near Infrared Imaging. In: 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014.

Shaikh, P.H. and Mohd Nor, N.B. and Nallagownden, P. and Elamvazuthi, I. (2014) Optimized intelligent control system for indoor thermal comfort and energy management of buildings. In: UNSPECIFIED.

Shairi, N.A. and Ahmad, B.H. and Wong, P.W. (2014) Absorptive SPDT switch design using cascaded switchable parallel-coupled stub resonator and switchable radial stub resonator. In: UNSPECIFIED.

Shairi, N.A. and Wong, P.W. and Ahmad, B.H. (2014) Switchable matched ring resonator in SPDT discrete switch design for WiMAX and LTE in 3.5 GHz band. In: UNSPECIFIED.

Shakir, M. and Malik, A.S. and Kamel, N. and Qidwai, U. (2014) Detection of partial seizure: An application of fuzzy rule system for wearable ambulatory systems. In: UNSPECIFIED.

Shakir, M. and Malik, A.S. and Kamel, N. and Qidwai, U. (2014) Intelligent Fuzzy Classifier for pre-seizure detection from real epileptic data. In: UNSPECIFIED.

Shakir, M. and Malik, A.S. and Kamel, N. and Qidwai, U. (2014) Rule-base wearable embedded platform for seizure detection from real EEG data in ambulatory state. In: UNSPECIFIED.

Shakir, Mohamed and Malik, Aamir Saeed and Kamel, Nidal S. and Qidwai, Uvais (2014) Intelligent Fuzzy Classifier for Pre-Seizure Detection from Real Epileptic Data. In: Science and Information Conference (SAI) 2014.

Shakir, Mohamed and Malik, Aamir Saeed and Kamel , Nidal and Qidwai, Uvais (2014) Detection of partial seizure: An application of fuzzy rule system for wearable ambulatory systems. In: 2014 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014.

Shakir, Mohamed and Malik, Aamir Saeed and Kamel , Nidal and Qidwai, Uvais (2014) Fuzzy Platform for Embedded Wearable EEG Seizure Detection in Ambulatory State. In: 2014 Fifth International Conference on Intelligent Systems, Modelling and Simulation (ISMS 2014).

Shannan, N.M. and Yahaya, N.Z. and Singh, B. (2014) Two diode model for parameters extraction of PV module. In: UNSPECIFIED.

Sharif, A.M. and Basri, S. (2014) Risk assessment factors for SME software development companies in Malaysia. In: UNSPECIFIED.

Shariff, A.M. and Shaikh, M.S. and Bustam, M.A. and Murshid, G. (2014) Physical properties of aqueous potassium carbonate + L-proline as a solvent blend for CO2 capture. In: UNSPECIFIED.

Shoaib, M. and Hamid, N.H.B. and Ali, N.B.B.Z. and Jan, M.T. and Mirza, A. (2014) Study of nonlinear pull-in voltage effects in electrostatic cantilever-based MEMS sensors. In: UNSPECIFIED.

Shuaib A, K. and Khaled A, E. and Kumar, S. and Abbas, G. (2014) Wettability alteration by new acid-alkali-surfactant-polymer formulation in high salinity carbonate reservoirs. In: UNSPECIFIED.

Shukla, Vineeta and Zain Ali, Noohul Basheer and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2014) Diagonal Testing in Digital Microfluidics Biochips Using MEDA Based Approach. In: 5th International Conference on Intelligent and Advanced Systems, ICIAS 2014, 3-5 June 2014, Kuala Lumpur Malaysia.

Shukri, I.N.B.M. and Rosdiazli, B.I. (2014) Implementation of Acoustic Emission technique in early detection of control valve seat leakage. In: UNSPECIFIED.

Singh, B. and Hasbullah, H. and Nayan, M.Y. and Tahlan, B. (2014) Early detection of incident using Vehicular Ad-hoc Network. In: UNSPECIFIED.

Singh, H.K.A.G. and Jaafar, A. and Yusup, S. (2014) The effect of sodium hydroxide on drag reduction using a biopolymer. In: UNSPECIFIED.

Singh, V. and Elamvazuthi, I. and Jeoti, V. and George, J. (2014) 3D reconstruction of ATFL ligament using ultrasound images. In: UNSPECIFIED.

Slaiman, Iskandar and Tang, Tong Boon and Hamid, Nor Hisham B (2014) Pulse amplitude and delay modulation for indoor optical wireless communications. In: 2014 International Conference on Computer, Communications, and Control Technology (I4CT).

Slaiman, I. and Tang, T.B. and Hamid, N.H.B. (2014) Pulse amplitude and delay modulation for indoor optical wireless communications. In: UNSPECIFIED.

Socheatra, S. and Zain Ali, N.B. and Khir, M.H.Md. (2014) Printed circuit board interconnect fault inspection based on eddy current testing. In: UNSPECIFIED.

Sodangi, M. and Khamdi, M.F. and Idrus, A. and Hammad, D.B. and Ahmedumar, A. (2014) Best practice criteria for sustainable maintenance management of heritage buildings in Malaysia. In: UNSPECIFIED.

Sohail, A. and Dominic, P.D.D. and Shahzad, K. (2014) A process warehouse based resource performance evaluation method for business processes improvement. In: UNSPECIFIED.

Sohail, A. and Dominic, P.D.D. and Shahzad, K. (2014) A process warehouse based resource suitability evaluation method for business process improvement. In: UNSPECIFIED.

Soleimani, H. and Yahya, N. and Latiff, N.R.A. and Sabet, M. and Guan, B.H. and Chuan, L.K. (2014) Co-precipitation synthesis of Co2+xFe2+1-xFe2O4nanoparticles: Structural characterization and magnetic properties. In: UNSPECIFIED.

Soomro, M.H. and Badruddin, N. and Yusoff, M.Z. (2014) Comparison of blind source separation methods for removal of eye blink artifacts from EEG. In: UNSPECIFIED.

Soomro, M.H. and Badruddin, N. and Yusoff, M.Z. (2014) Comparison of blind source separation methods for removal of eye blink artifacts from EEG. In: Intelligent and Advanced Systems (ICIAS), 2014 5th International Conference on.

Soomro, S. and Ahmad, W.F.W. and Sulaiman, S. (2014) Evaluation of mobile games with playability heuristic evaluation system. In: UNSPECIFIED.

Soomro, Sarmad and Ahmad, Wan Fatimah Wan and Sulaiman, Suziah (2014) Evaluation of mobile games with playability heuristic evaluation system. In: Computer and Information Sciences (ICCOINS), 2014 International Conference on.

Sovuthy, C. and Wen, W.P. (2014) High Q, miniaturized dual-mode coaxial bandpass filter. In: UNSPECIFIED.

Sulaiman, J. and Hasan, M.K. and Othman, M. and Karim, S.A.A. (2014) Fourth-order solutions of nonlinear two-point boundary value problems by Newton-HSSOR iteration. In: UNSPECIFIED.

Sulaiman, S. and Rambli, D.R.A. and Hashim, H.I. and Mokhtahir, M.M. (2014) Synchronizing audio and haptic feedback to read webpage. In: UNSPECIFIED.

Sulaiman, S.A. and Ahmed Ismail, A.K.A. and Noor Azman, M.N.F. (2014) Scattering effects in laser attenuation system for measurement of droplet number density. In: UNSPECIFIED.

Sulaiman, S.A. and Fauzi, F.F. (2014) Study on thermal performance assessment of solar hot water systems in Malaysia. In: UNSPECIFIED.

Sulaiman, S.A. and Singh, A.K. and Mokhtar, M.M.M. and Bou-Rabee, M.A. (2014) Influence of dirt accumulation on performance of PV panels. In: UNSPECIFIED.

Sulaimon, A.A. and Ramli, N. and Adeyemi, B.J. and Saaid, I.M. (2014) New correlation for oil formation volume factor. In: UNSPECIFIED.

Suman, Shipra and Hussin, Fawnizu Azmadi and Malik, Aamir Saeed and Nicolas, Walter and Goh, Khean Lee and Hilmi, Ida and Ho, Shiaw hooi (2014) Image Enhancement Using Geometric Mean Filter and Gamma Correction for WCE Images. In: 21st International Conference on Neural Information Processing, November 3-6, 2014, Kuching, Sarawak, Malaysia.

Sumra, I.A. and Hasbullah, H.B. and Abmanan, J.-L.B. (2014) Effects of attackers and attacks on availability requirement in vehicular network: A survey. In: UNSPECIFIED.

Sutri, NY and Dennis, JO and Khir, MH Md and Tang, TB and Mian, MU (2014) Low-noise, low-offset modulator demodulator circuit for chopper stabilization technique in CMOS-MEMS sensor applications. In: 2014 5th International Conference on Intelligent and Advanced Systems (ICIAS).

Sutri, N.Y. and Dennis, J.O. and Khir, M.H.Md. and Tang, T.B. and Mian, M.U. (2014) Low-noise, low-offset modulator demodulator circuit for chopper stabilization technique in CMOS-MEMS sensor applications. In: UNSPECIFIED.

Syafiq Bin Mohd, M. and Noh Bin Karsiti, M. and Syaifuddin Bin Mohd, M. (2014) Phase angle adjustment for phase advance control of brushless DC motor. In: UNSPECIFIED.

Syed, Z.I. and Palaniandy, D.K. and Liew, M.S. (2014) Damage assessment of offshore riser-guards under accidental vessel impact. In: UNSPECIFIED.

Talpur, M.A.H. and Napiah, M. and Chandio, I.A. and Qureshi, T.A. and Khahro, S.H. (2014) Development of a regional transport policy support system for rural planning agencies in developing world. In: UNSPECIFIED.

Tan, C.S. and Lau, P.Y. and Phang, S.-M. and Low, T.J. (2014) A framework for the automatic identification of algae (Neomeris vanbosseae M.A. Howe):U3S. In: UNSPECIFIED.

Tang, Tong Boon and Lim, Yee Ling and Aslam, M Zubair (2014) Detecting trace amount of water in crude oil with capacitance sensors. In: SENSORS, 2014 IEEE.

Tang, Tong Boon and Yeo, Lip Wee and Lau, Dandy Jing Hui (2014) Activity awareness can improve continuous stress detection in galvanic skin response. In: SENSORS, 2014 IEEE.

Tang, T.B. and Lim, Y.L. and Aslam, M.Z. (2014) Detecting trace amount of water in crude oil with capacitance sensors. In: UNSPECIFIED.

Tang, T.B. and Yeo, L.W. and Lau, D.J.H. (2014) Activity awareness can improve continuous stress detection in galvanic skin response. In: UNSPECIFIED.

Teh, H.M. and Hashim, A.M. (2014) Submerged modular breakwaters for coastal protection. In: UNSPECIFIED.

Teh, H.M. and John, K.V. and Hashim, A.M. (2014) Hydraulic investigation of the H-type floating breakwater. In: UNSPECIFIED.

Teh, Hee Min and Kurian, V.J. and Hashim, Ahmad Mustafa (2014) Hydraulic Investigation of the H-type Floating Breakwater. In: International Conference OCEAN'S 14, 7-10 April 2014, Taipei.

Teo, W. and Yin, H. (2014) Optimized effective strain model for externally bonded FRP shear strengthened RC members. In: UNSPECIFIED.

Thangarasu, G. and Dominic, P.D.D. (2014) Prediction of hidden knowledge from Clinical Database using data mining techniques. In: UNSPECIFIED.

Tippa, S. and Narahari, M. and Pendyala, R. (2014) Dufour effect on unsteady natural convection flow past an infinite vertical plate with constant heat and mass fluxes. In: UNSPECIFIED.

Triwiyanto, A. and Zainuddin, A. and Abidin, K.A.Z. and Billah, M.A. and Hussain, P. (2014) Mathematical modelling of nitride layer growth of low temperature gas and plasma nitriding of AISI 316L. In: UNSPECIFIED.

Tunji, L.A.Q. and Yusof, K.W. and Hashim, A.M. and Sapari, N. (2014) Assessing shoreline response to three submerged breakwaters at Kerteh Bay, Terengganu, Malaysia using Landsat imagery. In: UNSPECIFIED.

Ty, Phuor and Sambu Potty, Narayanan and Akram, M. K. M (2014) Matrix Integration of Schedule & Cost to Predict Offshore Structure Project Cost. In: 2014 IEEE Colloquium on Humanities, Science and Engineering (CHUSER 2014), 7 - 8 April, 2014, Penang Malaysia.

Ur Rehman, M. and Drieberg, M. and Badruddin, N. (2014) Probabilistic polling MAC protocol with unslotted CSMA for wireless sensor networks (WSNs). In: UNSPECIFIED.

Ur Rehman, Mutee and Drieberg , Micheal and Badruddin, Nasreen (2014) Probabilistic Polling MAC Protocol with Unslotted CSMA for Wireless Sensor Networks. In: 5th International Conference on Intelligent & Advanced Systems (ICIAS 2014).

Verma, K. and Hasbullah, H. (2014) IP-CHOCK (filter)-Based detection scheme for Denial of Service (DoS) attacks in VANET. In: UNSPECIFIED.

Verma, K. and Hasbullah, H. and Saini, H.K. (2014) Reference broadcast synchronization-based prevention to DoS attacks in VANET. In: UNSPECIFIED.

Vuong, P.L. and Malik, A.S. and Bornot, J. (2014) Weighted-permutation entropy as complexity measure for electroencephalographic time series of different physiological states. In: UNSPECIFIED.

Wagan, A.A. and Jung, L.T. (2014) Security framework for low latency vanet applications. In: UNSPECIFIED.

Wagdy, M. and Faye, I. and Rohaya, D. (2014) Document image skew detection and correction method based on extreme points. In: UNSPECIFIED.

Wardaya, P.D. and Major, R.P. and Sum, C.W. and Ridha, S. (2014) Seismic modeling for investigating the influence of pore geometry to the seismic velocity in carbonate rock. In: UNSPECIFIED.

Wardaya, P.D. and Noh, K.A.B.M. and Yusoff, W.I.B.W. and Ridha, S. and Nurhandoko, B.E.B. (2014) The thin section rock physics: Modeling and measurement of seismic wave velocity on the slice of carbonates. In: UNSPECIFIED.

Waris, M. and Liew, Mohd.S. and Khamidi, Mohd.F. and Idrus, A. (2014) Investigating the awareness of onsite mechanization in malaysian construction industry. In: UNSPECIFIED.

Wasiu, A.B. and Aziz, A.R.A. and Heikal, M.R. (2014) The effect of injection timing on the performance of natural gas with a high carbon dioxide (CO2) content in a Direct Injection (DI) gas engine. In: UNSPECIFIED.

Wassan, R.K. and Majid, M.A.A. and Mokhtar, A.A. (2014) Risk matrix model for rotating equipment. In: UNSPECIFIED.

Windarta and Baharom, M.B. (2014) Experimental prediction of wear rate on rail and wheel materials at dry sliding contact. In: UNSPECIFIED.

Woldemichael, D.E. and Hashim, F.M. (2014) Progressive concept evaluation method for automatically generated concept variants. In: UNSPECIFIED.

Yassen, T.A. and Al-Kayiem, H.H. and Habib, K. (2014) Evaluation of hybrid solar - Biomass dryer with no load. In: UNSPECIFIED.

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. and Ng, C.Y. (2014) Nonlinear system identification via basis functions based time domain volterra model. In: UNSPECIFIED.

Yin, K.Y. and Al-Kayiem, H.H. and Pao, W. (2014) Numerical study of water control with downhole oil-water separation technology. In: UNSPECIFIED.

Yunus, M. and Shuib, A.S. and Shah, T.M.Y. and Shaari, K.Z.K. and Muda, A.S. (2014) Wall shear stress prediction using computational simulation on patient specific artery with aneurysm. In: UNSPECIFIED.

Yusof, M.A.M. and Yusoff, W.I.W. and Zakaria, S.I. (2014) Evaluation of heat flow anomalies and hydrocarbon accumulation in IB field, Malaysia. In: UNSPECIFIED.

Yussiff, A.-L. and Yong, S.-P. and Baharudin, B.B. (2014) Parallel Kalman filter-based multi-human tracking in surveillance video. In: UNSPECIFIED.

Yussiff, A.-S. and Ahmad, W.F.W. and Oxley, A. (2014) Conceptual framework for effective E-collaboration and didactic enhancement. In: UNSPECIFIED.

Yussiff, Alimatu-Saadia and Ahmad, Wan Fatimah Wan and Oxley, Alan (2014) Conceptual framework for effective E-collaboration and didactic enhancement. In: Computer and Information Sciences (ICCOINS), 2014 International Conference on.

Zafar, R. and Malik, A.S. and Amin, H.U. and Kamel, N. and Dass, S. and Ahmad, R.F. (2014) EEG spectral analysis during complex cognitive task at occipital. In: UNSPECIFIED.

Zaidi, K.S. and Jeoti, V. and Iqbal, A. and Awang, A. (2014) Feasibility of trans-horizon, high-capacity maritime wireless backhaul communication link. In: UNSPECIFIED.

Zain, R.M. (2014) Autoguide system for conventional vehicle on highway. In: UNSPECIFIED.

Zardari, M.A. and Jung, L.T. and Zakaria, N. (2014) K-NN classifier for data confidentiality in cloud computing. In: UNSPECIFIED.

Zardari, M.A. and Jung, L.T. and Zakaria, N. (2014) A quantitative analysis of cloud users' satisfaction and data security in cloud models. In: UNSPECIFIED.

Zarif, S. and Faye, I. and Dayang, R. (2014) A comparative study of different image completion techniques. In: UNSPECIFIED.

Zawawi, N.A.W.A. and Umar, A.A. and Aziz, A.R.A. and Crouzier, O. and Khamidi, M.F. and Idrus, A. (2014) PFI procurement skills: A cross-sector survey of practitioners. In: UNSPECIFIED.

Zhenjun, L. and Nisar, H. and Malik, A.S. (2014) A framework for real time indoor robot navigation using Monte Carlo Localization and ORB feature detection. In: UNSPECIFIED.

Zhenjun, Lye and Nisar, Humaira and Malik, Aamir Saeed (2014) A framework for real time indoor robot navigation using Monte Carlo Localization and ORB feature detection. In: The 18th IEEE International Symposium on Consumer Electronics (ISCE 2014).

Zia-Ul-Mustafa, M. and Ahmad, F. and Megat-Yusoff, P.S.M. and Aziz, H. (2014) The effect of particle size of wollastonite filler on thermal performance of intumescent fire retardant coating. In: UNSPECIFIED.

Zulkefli, N.A.B.M. and Baharudin, B.B. (2014) A case study on travel information from social network - Focus in Facebook and blogs in Malaysia. In: UNSPECIFIED.

Zulkifli, S.A. and Asirvadam, V.S. and Saad, N. and Aziz, A.R.A. and Mohideen, A.A.M. (2014) Implementation of electronic throttle-by-wire for a hybrid electric vehicle using National Instruments' CompactRIO and LabVIEW Real-Time. In: UNSPECIFIED.

Book

ABDUL KARIM, SAMSUL ARIFFIN (2014) Monotonicity Preserving Using New Rational Quartic Spline. LAP Lambert Academic Publishing. ISBN 13: 978-3-659-54868-0. 108 pp. Book Type: Research Monograph. 10 June 2016. LAP Lambert Academic Publishing. . ISBN ISBN 13: 978-3-659-54868-0

Abdullah, M.A. and Shah, S.M.U. and Ahmad, A. and El-Sayed, H. (2014) Algal biotechnology for bioenergy, environmental remediation and high-value biochemicals. Apple Academic Press, pp. 301-344.

Amin, H.U. and Malik, A.S. (2014) Memory retention and recall process. CRC Press, pp. 219-237.

Bhat, A.H. and Dasan, Y.K. and Haque, I.U. and Ahmad, A. (2014) Potential applications and adverse effects of bisphenol a in humans. Nova Science Publishers, Inc., pp. 13-31.

Chowdhury, S. and Yasir, M. and Uemura, Y. and Mohamed, N.M. and Uddin, A. and Yanagida, T. (2014) Application of micro-or small-scale biomass-derived fuel system for power generation. Springer International Publishing, pp. 339-367.

Ganesan, T. and Elamvazuthi, I. and KuShaari, K.Z. and Vasant, P. (2014) Meta-heuristic structure for multiobjective optimization case study: Green sand mould system. IGI Global, pp. 38-58.

Ganesan, T. and Elamvazuthi, I. and Shaari, K.Z.K. and Vasant, P. (2014) Multiobjective optimization of bioethanol production via hydrolysis using hopfield- enhanced differential evolution. IGI Global, pp. 340-359.

Gul-E-Saba and Abdullah, M.A. (2014) Polymeric nanoparticle mediated targeted drug delivery to cancer cells. Apple Academic Press, pp. 1-34.

Hani, A.F.M. (2014) Preface. CRC Press, ix-x.

Hani, A.F.M. (2014) Surface imaging for biomedical applications. CRC Press, pp. 1-309.

Hani, A.F.M. and Fitriyah, H. (2014) Skin lesion thickness assessment. CRC Press, pp. 123-179.

Hani, A.F.M. and Nugroho, H. and Shamsudin, N. (2014) Analysis of skin pigmentation. CRC Press, pp. 181-217.

Hani, A.F.M. and Prakasa, E. (2014) Body surface area measurement for lesion area assessment. CRC Press, pp. 87-122.

Hani, A.F.M. and Prakasa, E. (2014) Determination of lesion color for clustering psoriasis erythema. CRC Press, pp. 51-86.

Hani, A.F.M. and Prakasa, E. (2014) Skin surface roughness measurement for assessing scaliness of psoriasis lesions. CRC Press, pp. 1-49.

Inayat, A. and Ahmad, M.M. and Yusup, S. and Mutalib, M.I.A. and Khan, Z. (2014) Biomass steam gasification for hydrogen production: A systematic review. Springer International Publishing, pp. 329-343.

Jatoi, M.A. and Begum, T. and Shahid, A. (2014) Brain source localization using EEG signals. CRC Press, pp. 91-122.

Kamel, N. (2014) The fundamentals of eeg signal processing. CRC Press, pp. 21-71.

Kamel, N. and Malik, A.S. (2014) EEG/ERP analysis: Methods and applications. CRC Press, pp. 1-312.

Kamel, N.S. and Malik, A.S. (2014) Preface. CRC Press, ix-xii.

Kamel , Nidal and Malik, Aamir Saeed (2014) EEG/ERP Analysis: Methods and Applications. CRC Press.

Mohamed, M. and Yusup, S. and Wahyudiono and Machmudah, S. and Goto, M. and Uemura, Y. (2014) Upgrading of oil palm empty fruit bunch to value-added products. Springer International Publishing, pp. 63-78.

Nidal, Kamel and Malik, Aamir Saeed (2014) EEG/ERP analysis: methods and applications. Crc Press.

Rani, A.M.A. and Hani, A.F.M. and El-Tegani, N. and Chong, E. and Sagar, A. (2014) Quantitative assessment of ulcer wound volume. CRC Press, pp. 219-272.

Rasheed, W. and Tang, T.-B. (2014) Neurological injury monitoring using qeeg. CRC Press, pp. 143-156.

SIVAPALAN, SUBARNA (2014) Approaching Postcolonial & Psychoanalytical Criticism in Literary Studies: An Illustration of an Analysis of a Malaysian novel. Trafford Publishers, Singapore. ISBN 9781490703466

Sanchez-Bornot, J.M. and Ahmad, A.L. (2014) Perspectives of M-EEG and fMRI data fusion. CRC Press, pp. 195-218.

Shahid, A. and Tharakan, J.K.J. (2014) Epilepsy detection and monitoring. CRC Press, pp. 123-141.

Sivaji, A. and Wan Ahmad, W.F. (2014) Benefits of complementing eye-tracking analysis with think-aloud protocol in a multilingual country with high power distance. Springer International Publishing, pp. 267-278.

Vasant, P. (2014) Handbook of Research on Artificial Intelligence Techniques and Algorithms. IGI Global, pp. 1-118.

Vasant, P. (2014) Hybrid evolutionary optimization algorithms: A case study in manufacturing industry. IGI Global, pp. 59-95.

Vasant, P. (2014) Preface. IGI Global, xxxiv-xxxix.

Xia, L. and Subhani, A.R. (2014) EEG and qEEG in psychiatry. CRC Press, pp. 175-194.

Citation Index Journal

ABBAS, MUHAMMAD AZEEM and AHMAD, WAN FATIMAH WAN and KALID, KHAIRUL SHAFEE (2014) Semantic Web Technologies for Pre-School Cognitive Skills Tutoring System. [Citation Index Journal]

ABDUL KARIM, SAMSUL ARIFFIN (2014) Bézier Triangular Patches for Closed Surface. [Citation Index Journal]

ABDUL KARIM, SAMSUL ARIFFIN (2014) Convexity Preserving Using GC^1 Cubic Ball Interpolation. [Citation Index Journal]

ABDUL KARIM, SAMSUL ARIFFIN (2014) Convexity-preserving using rational cubic spline interpolation. [Citation Index Journal]

ABDUL KARIM, SAMSUL ARIFFIN (2014) Cubic Spline Interpolation for Petroleum Engineering Data. [Citation Index Journal]