Browse by Type

Yong Hooi, Lim and Hai Hiung, Lo and Micheal, Drieberg and Patrick, Sebastian (2016) Configurable 2 Bits per Cycle Successive Approximation Register for Analog to Digital Converter on FPGA. In: International Conference on Intelligent and Advanced Systems (ICIAS 2016), 17 - 19 Aug, 2016, Kuala Lumpur Convention Center. (Unpublished)

Elkhalifah, ALI EI and Bustam, Mohammad Azmi and Mohd Shariff, Azmi and Ullah, SAMI and Riaz, NADIA and Gonfa, GIRMA (2016) Development and Characterization of Amine-clay Hybrid Adsorbents for CO2 Capture. In: Advanced Materials Research.

Wijenayake, AGBSP and Hassan, M and Komiyama, M (2016) Supercritical water gasification of microalga Nannochloropsis over supported Ni and Ru catalysts. In: AIP Conference Proceedings.

Muzamil, Hassan and Masaharu, Komiyama (2016) Hydrocarbon Production from Methane under Supercritical Water Conditions. In: 表��学学������� 2016 年�空�表��学�����.

Suleman, Humbul and Maulud, Abdulhalim Shah and Man, Zakaria (2016) Performance evaluation of carbon dioxide-alkanolamine-water system by equation of state/excess Gibbs energy models. In: IOP Conference Series: Earth and Environmental Science.

Suleman, Humbul and Maulud, Abdulhalim Shah and Man, Zakaria (2016) Solubility prediction of carbon dioxide in water by an iterative equation of state/excess Gibbs energy model. In: IOP Conference Series: Earth and Environmental Science.

Lee, Siew Pei and Mellon, Nurhayati and Lau, Tuck Khein and Mohd Shariff, Azmi and Leveque, Jean Marc (2016) Synthesis and Characterization of Covalent Organic Polymer. In: Key Engineering Materials.

Lock, Serene Sow Mun and Lau, Kok Keong and Lock, Irene Sow Mei and Shariff, Azmi Mohd and Yeong, Yin Fong and Abdullah, Bawadi (2016) Mathematical modeling of thickness dependent physical aging in polymeric membranes. In: Key Engineering Materials.

Mohamed, Norani Muti and Bashiri, Robabeh and Kait, Chong Fai and Sufian, Suriati and Khatani, Mehboob (2016) Investigation of photoconversion efficiency of Cu and Ni doped TiO2 thin film in photoelectrochemical cell. In: AIP Conference Proceedings.

Abunowara, M and Bustam, MA and Sufian, S and Eldemerdash, U (2016) Measurement techniques for carbon dioxide sorption capacity on various coal samples: critical review. In: IOP Conference Series: Earth and Environmental Science.

Abunowara, M and Bustam, MA and Sufian, S and Eldemerdash, U (2016) Characterization of Malaysian coals for carbon dioxide sequestration. In: IOP Conference Series: Earth and Environmental Science.

Yahaya Khan, Mohammed and Abdul Karim, ZA and Aziz, A Rashid A and Tan, Isa Mohd (2016) Experimental study on influence of surfactant dosage on micro explosion occurrence in water in diesel emulsion. In: Applied Mechanics and Materials.

Lal, BHAJAN and Keong, LAU Kok and Bustam, MOHD AZMI and Sufian, SURIATI and Murugesan, THANABALAN (2016) Volumetric Properties of Alkali Salt in Aqueous 1-Butyl-3-Methylimidazolium Tetrafluoroborate at Various Temperatures. In: Advanced Materials Research.

Hadi, SHAA and Mannan, HA and Mukhtar, H and Shaharun, MS and Murugesan, T (2016) Morphological analysis of Polyethersulfone/polyvinyl Acetate blend membrane synthesized at various polymer concentrations. In: IOP Conference Series: Earth and Environmental Science.

Nasir, QAZI and Lal, BHAJAN and Keong, Lau Kok (2016) The Presence of additive mixtures (THF/SDS) on carbon dioxide rich gas mixture hydrate formation and dissociation conditions. In: Advanced Materials Research.

Mukhtar, H and Mannan, HA and Minh, D and Nasir, R and Moshshim, DF and Murugesan, T (2016) Polymer blend membranes for CO2 separation from natural gas. In: IOP Conference Series: Earth and Environmental Science.

Lock, Serene Sow Mun and Lau, Kok Keong and Lock, Irene Sow Mei and Shariff, Azmi Mohd and Yeong, Yin Fong and Abdullah, Bawadi (2016) Mathematical modeling of thickness dependent physical aging in polymeric membranes. In: Key Engineering Materials.

Lai, LI Sze and Yeong, YIN Fong and Lau, KOK Keong and Azmi, MOHD SHARIFF (2016) Preliminary study on the synthesis of ZIF-8 membranes via in situ and secondary seeded growth methods. In: Advanced Materials Research.

Lal, BHAJAN and Keong, LAU Kok and Bustam, MOHD AZMI and Sufian, SURIATI and Murugesan, THANABALAN (2016) Volumetric Properties of Alkali Salt in Aqueous 1-Butyl-3-Methylimidazolium Tetrafluoroborate at Various Temperatures. In: Advanced Materials Research.

Suleman, MS and Lau, KK and Yeong, YF (2016) Development and performance evaluation of Polydimethyl siloxane/Polysulfone (PDMS/PSF) composite membrane for CO2/CH4 separation. In: IOP Conference Series: Earth and Environmental Science.

Daneshfozoun, SAFOURA and Abdullah, BAWADI and Abdullah, M Azmuddin (2016) The effects of oil palm empty fruit bunch sorbent sizes on plumbum (II) ion sorption. In: Advanced Materials Research.

Ooi , Joo-On and Hussin, Fawnizu Azmadi and Zakaria, Mohd Nordin (2016) Dual-Engine Corss-ISA DBTO Technique utilising MultiThreaded Support for Multicore Processor System. In: The IEEE 10th International Symposium on Embedded Multicore/Many-core Systems-on-Chip (MC-SoC 2016), 21-23 September 2016, Lyon, France. (In Press)

Suman, Shipra and Hussin, Fawnizu Azmadi and Nicolas, Walter and Malik, Aamir Saeed and Hooi, Shaiw and Goh, Khean Lee (2016) Detection and Classification of Bleeding Using Statistical Color Features for Wireless Capsule Endoscopy Images. In: International Conference on Signal and Information Processing (IConSIP-2016), 6-8 Oct 2016, Hyderabad, India. (In Press)

Shukla, Vineeta and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham and Zain Ali , Noohul Basheer (2016) Investigation of Capacitance Dependence on Droplet Volume in MEDA Based Biochips. In: 6th International Conference on Intelligent and Advanced Systems (ICIAS2016), August 15-17, 2016, Kuala Lumpur Malaysia. (In Press)

Suman, Shipra and Hussin, Fawnizu Azmadi and Nicolas, Walter and Malik, Aamir Saeed and Hilmi, Ida (2016) Automatic Detection and Removal of Bubble Frames from Wireless Capsule Endoscopy Video Sequences. In: 6th International Conference on Intelligent and Advanced Systems (ICIAS2016), August 15-17, 2016, Kuala Lumpur Malaysia. (In Press)

Sethi, Muhammad Athar Javed and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2016) Biologically Inspired Network on Chip Fault Tolerant Algorithm Using Time Division Multiplexing. In: 6th IEEE International Conference on Intelligent & Advanced Systems, August 15-17, 2016, Kuala Lumpur, Malaysia. . (In Press)

Shaheen, Ateeq U. R. and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2016) False path identification algorithm framework for nonseparable controller-data path circuits. In: 6th International Conference on Intelligent and Advanced Systems (ICIAS2016), August 15-17, 2016, Kuala Lumpur Malaysia. (In Press)

Shukla, Vineeta and Hussin, Fawnizu Azmadi and Zain Ali, Noohul Basheer (2016) Fault Modeling and Simulation of MEDA based Digital Microfluidics Biochips. In: 29th International Conference on VLSI Design, January 4-8, 2016, Kolkata, India.

Chung, T.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Hassan, S.M. (2016) Internal model control for industrial wireless plant subject to measured round trip delays. In: UNSPECIFIED.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Chung, T.D. (2016) Setpoint weighted wirelesshart networked control of process plant. In: UNSPECIFIED.

Tageldeen, M.K. and Elamvazuthi, I. and Perumal, N. (2016) Motion control for a multiple input rehabilitation wearable exoskeleton using fuzzy logic and PID. In: UNSPECIFIED.

Parman, S. (2016) Study on structural deflection of flexible satellite during attitude maneuver using fuel-efficient input shaper. In: UNSPECIFIED.

Uddin, M. and Romlie, M.F. and Abdullah, M.F. (2016) Feasibility study of grid connected solar home system: The perspective of Malaysia. In: UNSPECIFIED.

Shah Riman, N.I. and Abdullah, M.F. and Romlie, M.F. and Baharudin, Z. (2016) Third harmonic current contribution from synchronous generator with filtering during ground fault. In: UNSPECIFIED.

Mohammed, B.S. and Nuruddin, M.F. and Shafiq, N. (2016) Development of high strength nano-silica modified rubbercrete. In: UNSPECIFIED.

Altaf, K. and Rani, A.M.A. and Ahmad, F. and Aslam, M. (2016) Rapid tooling for powder injection moulding process. In: UNSPECIFIED.

Baharuddin, S.H. and Mustahil, N.A. and Abdullah, A.A. and Sivapragasam, M. and Moniruzzaman, M. (2016) Ecotoxicity study of amino acid ionic liquids towards danio rerio fish: Effect of cations. In: UNSPECIFIED.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. and Khatani, M. and Hanaei, H. (2016) Effect of preparation parameters on optical properties of Cu and Ni doped TiO2 photocatalyst. In: UNSPECIFIED.

Taqvi, S.A. and Tufa, L.D. and Muhadizir, S. (2016) Optimization and Dynamics of Distillation Column Using Aspen Plus®. In: UNSPECIFIED.

Sellappah, V. and Uemura, Y. and Hassan, S. and Sulaiman, M.H. and Lam, M.K. (2016) Torrefaction of Empty Fruit Bunch in the Presence of Combustion Gas. In: UNSPECIFIED.

Kamarulzaman, N. and Zawawi, N.A.W.A. and Mohammed, N.I. (2016) Effect of landscape density in a residential area on thermal performance in a tropical climate. In: UNSPECIFIED.

Ooi, B.L. and Rashid, A. and Aziz, A. (2016) Modelling of Output Power Response for Switched Damping Electromagnetic Energy Harvester. In: UNSPECIFIED.

Batcha, S.R. and Sakidin, H. and Ahmad, A. (2016) Simpler hydrostatics component of UNBabc mapping function using nonlinear curve fitting method. In: UNSPECIFIED.

Qidwai, U. and Shakir, M. and Bahameish, M. (2016) Real-time robotic avatar control using fuzzy gaze-classification for people with disability. In: UNSPECIFIED.

Babangida, N.M. and Ul Mustafa, M.R. and Yusuf, K.W. and Isa, M.H. and Baig, I. (2016) Evaluation of low degree polynomial kernel support vector machines for modelling Pore-water pressure responses. In: UNSPECIFIED.

Abbasi, I. and Ali, S.S.A. and Ibrahim, R. and Adil, S.H. and Ovinis, M. (2016) U-model based depth control of underwater glider. In: UNSPECIFIED.

Hidayat, M.I.P. and Irawan, S. and Abdullah, M.Z. (2016) Casing strength degradation in thermal environment of steam injection wells. In: UNSPECIFIED.

Madni, T.M. and Nayan, Y. and Sulaiman, S. and Tahir, M. and Abro, A. (2016) Usability Dimensions for Content-Orientation Techniques in Multi-Touch Tabletop Displays: An Overview. In: UNSPECIFIED.

Hamed, Y. and Shafie, A. and Mustaffa, Z.B. and Idris, N.R.B. (2016) Comparative calibration of corrosion measurements using K-nearest neighbour based techniques. In: UNSPECIFIED.

Bashiri, M. and Mumtaz, W. and Malik, A.S. and Waqar, K. (2016) EEG-based brain connectivity analysis of working memory and attention. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Naufal, M. and Saad, M. and Mazher, M. and Rasheed, W. and Abdullah, T.A.R.B.T. (2016) Designing of disparity map based on hierarchical dynamic programming using satellite stereo imagery. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Naufal, M. and Saad, M. and Mazher, M. and Abdullah, F. and Abdullah, T.A.R.B.T. (2016) Designing of overcomplete dictionaries based on DCT and DWT. In: UNSPECIFIED.

Yusnenti, F.M.Y. and Othman, M. and Mustapha, M. and MohdYusri, I. (2016) Silicanizing Process on Mild Steel Substrate by Using Tronoh Silica Sand: Microstructure, composition and coating growth. In: UNSPECIFIED.

Elsiti, N.M. and Noordin, M.Y. and Alkali, A.U. (2016) Fabrication of high aspect ratio micro electrode by using EDM. In: UNSPECIFIED.

Awang, A. and Abbasi, U.F. (2016) Performance evaluation of cross-layer opportunistic MAC/routing with node's mobility for wireless body area networks. In: UNSPECIFIED.

Amin, F.B.M. and Mahmood, A.K. (2016) Review of Plug-Based Load Energy Management Systems (PLEMS) for energy and comfort management of buildings. In: UNSPECIFIED.

Hamed, Y. and Shafie, A. and Mustaffa, Z.B. and Idris, N.R.B. (2016) An application of K-Nearest Neighbor interpolation on calibrating corrosion measurements collected by two non-destructive techniques. In: UNSPECIFIED.

Abbasi, I. and Ali, S.S.A. and Ibrahim, R. and Adil, S.H. and Ovinis, M. (2016) U-model based depth control of underwater glider. In: UNSPECIFIED.

Rashidi, M. and Marhamati, M. and Bharadwaj, A.M. (2016) A case study of challenges we have in pore pressure prediction techniques for a carbonate reservoir. In: UNSPECIFIED.

Imran, M. and Ariff, M. and Sharma, R. and Arshad, N.I. (2016) Exploring the role of Transactive Memory Systems in virtual teams: Review and synthesis of literature. In: UNSPECIFIED.

Indra, Z. and Jaafar, J. and Zamin, N. and Bakar, Z.A. (2016) A language identifier for Indonesian and Malay text document. In: UNSPECIFIED.

Ahmad, R. and Foroushan, P.C. and Peyvandi, S. (2016) A toolkit for the simulation of scheduling policy in desktop grid environment. In: UNSPECIFIED.

Gilal, A.R. and Jaafar, J. and Basri, S. and Omar, M. and Tunio, M.Z. (2016) Making programmer suitable for team-leader: Software team composition based on personality types. In: UNSPECIFIED.

Zulkefli, N.A.B.M. and Bin Baharudin, B. (2016) Hotel travel recommendation based on blog information. In: UNSPECIFIED.

Mastor, F.A. and Aziz, I.A. and Ismail, N.N. and Mehat, M. and Haron, N. and Wahyu, A. (2016) Conceptual design of pre-flood warning system based on user mobility. In: UNSPECIFIED.

Ibrahim, N. and Ahmad, W.F.W. and Shafie, A. (2016) A study on design principles and requirements for multimedia application development: MFolktales application for children's education. In: UNSPECIFIED.

Muthuvalu, M.S. and Aruchunan, E. and Ali, M.K.M. and Sulaiman, J. (2016) A comparative study of iterative methods for solving first kind Fredholm integral equations with the semi-smooth kernel. In: UNSPECIFIED.

Yussiff, A.-L. and Yong, S.-P. and Baharudin, B.B. (2016) Human tracking in video surveillance using particle filter. In: UNSPECIFIED.

Hassan, S. and Khosravi, A. and Jaafar, J. (2016) The impact of FOU size and number of MFs on the prediction performance of Interval Type-2 Fuzzy Logic Systems. In: UNSPECIFIED.

Safdar, T. and Hasbulah, H.B. and Rehan, M. (2016) Effect of reinforcement learning on routing of cognitive radio ad-hoc networks. In: UNSPECIFIED.

Iqbal, M.J. and Faye, I. and Said, A.M. and Belhaouari Samir, B. (2016) Optimized tree-classification algorithm for classification of protein sequences. In: UNSPECIFIED.

Janjua, U.I. and Jaafar, J. and Aziz, I.B.A. (2016) Integration of supportive processes with elementary processes for making current practices of software project risk management more effective. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2016) A multi-domain framework for modelling educational games: Towards the effective development in perspective of learning theories. In: UNSPECIFIED.

Nurika, O. and Hassan, M.F. and Zakaria, N. and Jung, L.T. (2016) Mathematical models for network card simulation and their empirical validations. In: UNSPECIFIED.

Abdulkadir, S.J. and Yong, S.-P. (2016) Lorenz time-series analysis using a scaled hybrid model. In: UNSPECIFIED.

Bhattacharjee, S. and Rahim, L.B.A. and Aziz, I.B.A. (2016) Hiding of compressed bit stream into audio file to enhance the confidentiality and portability of a data transmission system. In: UNSPECIFIED.

Bhaskar, P.K. and Yong, S.-P. and Jung, L.T. (2016) Enhanced and effective parallel optical flow method for vehicle detection and tracking. In: UNSPECIFIED.

Josephng, P.S. and Kang, C.M. and Choo, P.Y. and Wong, S.W. and Phan, K.Y. and Lim, E.H. (2016) Beyond cloud infrastructure services in medium size manufacturing. In: UNSPECIFIED.

Hassan, N.H.B. and Mustapha, E.E.B. and Arshad, N.I.B. (2016) Antecedent model of information technology infrastructure flexibility towards agility: Questionnaire evaluation. In: UNSPECIFIED.

Sarlan, A. and Xiong, F.K. and Ahmad, R. and Ahmad, W.F.W. and Bhattacharyya, E. (2016) Pre-hospital emergency notification system. In: UNSPECIFIED.

Wai, P.S. and Kun, S.S. and Ismail, M.T. and Karim, S.A.A. (2016) Model performance between linear vector autoregressive and Markov switching vector autoregressive models on modelling structural change in time series data. In: UNSPECIFIED.

Mehmood, T. and Rais, H.B.M. (2016) SVM for network anomaly detection using ACO feature subset. In: UNSPECIFIED.

Abbas, M.A. and Ahmad, W.F.W. and Kalid, K.S. (2016) The effectiveness of semantic web based preschool cognitive skills tutoring system: An empirical study. In: UNSPECIFIED.

Zain, F.M. and Aziz, I.A. and Haron, N. and Ramadhani, A.W. and Mehat, M. (2016) Open source seismic visualization package on OpenNebula cloud management system. In: UNSPECIFIED.

Pirzada, N. and Nayan, M.Y. and Fadzil, M. and Subhan, F. (2016) A testbed for device free indoor localization system. In: UNSPECIFIED.

Ibrahim, B.M. and Hassan, M.F. (2016) A new customizable security framework for preventing WSDL attacks. In: UNSPECIFIED.

Wagan, A.A. and Jung, L.T. (2016) A reliable and intelligent protocol for distributed data mining architecture in sporadic wireless sensor network. In: UNSPECIFIED.

Besrour, S. and Bin Ab Rahim, L. and Dominic, P.D.D. (2016) The study of the relation between requirement engineering techniques and challenges in software industry. In: UNSPECIFIED.

Alabool, H.M. and Mahmood, A.K. (2016) A novel evaluation model for improving trust level of infrastructure as a service. In: UNSPECIFIED.

Alkawsi, G.A. and Mahmood, A.K. and Baashar, Y.M. (2016) Factors influencing the adoption of cloud computing in SME: A systematic review. In: UNSPECIFIED.

Binti Mohamad Sani, N.S. and Binti Arshad, N.I. (2016) Towards a framework to measure knowledge transfer in organizations. In: UNSPECIFIED.

Yussiff, A.-S. and Ahmad, W.F.W. and Mustapha, E.E. (2016) Testing and validating a conceptual framework for e-collaboration in an undergraduate course. In: UNSPECIFIED.

Haruna, A.A. and Jung, L.T. and Zakaria, N. (2016) Design and development of hybrid integrated thermal aware job scheduling on computational grid environment. In: UNSPECIFIED.

Zardari, M.A. and Jung, L.T. (2016) Data classification with k-NN using novel character frequency-direct word frequency (CF-DWF) similarity formula. In: UNSPECIFIED.

Hooi, Y.K. and Hassan, M.F. and Shariff, A.M. (2016) Ontology evaluation - A criteria selection framework. In: UNSPECIFIED.

Janjua, U.I. and Jaafar, J. (2016) Role of academia to make current practices of software project risk management more effective: An exploratory study. In: UNSPECIFIED.

Abdullahi, A.U. and Ahmad, R.B. and Zakaria, N.M. (2016) Proposed adaptive indexing for Hive. In: UNSPECIFIED.

Al-Nuaimi, I.T.I. and Mahmood, A.K.B. and Mustapha, E.E. and Jebur, H.H. (2016) Analysis of significant dimensions of e-service quality in Malaysian universities. In: UNSPECIFIED.

Aziz, N.S.A. and Ahmad, W.F.W. (2016) Proposed conceptual model of mobile numerical application for children with autism. In: UNSPECIFIED.

Manaf, M.B.A. and Sulaiman, S.B. (2016) Integrating vibration sensing and non-speech visualization to notify hearing impaired students on fire in a controlled situation. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2016) A multi-domain framework for modelling educational games: Towards the effective development in perspective of game environment. In: UNSPECIFIED.

Strubel, D. and Bastourous, M. and Morel, O. and Saad, N.M. and Fofi, D. (2016) Sub-optimal waypoints, UAV path planning and mosaicing application. In: UNSPECIFIED.

Yussif, A.-S. and Ahmad, W.F.W. and Mustapha, E.E. (2016) The impact of electronic collaboration on learning outcomes. In: UNSPECIFIED.

Sambo, C.H. and Hematpour, H. and Danaei, S. and Herman, M. and Ghosh, D.P. and Abass, A. and Elraies, K.A. (2016) An integrated reservoir modelling and evolutionary algorithm for optimizing field development in a mature fractured reservoir. In: UNSPECIFIED.

Rehman, S. and Ali, S.S. and Adil, S.H. (2016) Wind farm layout design using cuckoo search algorithm. In: UNSPECIFIED.

Purnomo, E.W. and Ghosh, D.P. (2016) Optimizing full stacked PP-PS seismic data interpretation. In: UNSPECIFIED.

Hermana, M. and Ghosh, D.P. and Sum, C.W. (2016) New fluid and lithology indicator from seismic and rock physics: Malaysian offshore case study. In: UNSPECIFIED.

Prajapati, S. (2016) Attenuation or local wavefield amplification in the gas cloud ? In: UNSPECIFIED.

Socheatra, S. and Wen, W.P. and Cheong, L.Y. (2016) Highly selective bandstop filter using finite Q resonators. In: UNSPECIFIED.

Negash, B.M. and Tufa, L.D. and Marappagounder, R. and Awang, M.B. (2016) Conceptual framework for using system identification in reservoir production forecasting. In: UNSPECIFIED.

Adeeyo, Y.A. and Awang, M.B. (2016) Gibbs excess energy model to predict phase behaviour of brine/oil/surfactant mixtures for Chemical Enhanced Oil Recovery CEOR methods. In: UNSPECIFIED.

Hamdi, Z. and Awang, M. and Zamani, A. (2016) Evaluating liquid CO2 injection technique for oil recovery using core flood experiments. In: UNSPECIFIED.

Hamdi, Z. and Awang, M. and Bataee, M. and Kamyab, M. (2016) Cold CO2 injection for balancing interfacial tension decrease and viscosity increase. In: UNSPECIFIED.

Kalwar, S.A. and Elraies, K.A. and Abbas, G. and Kumar, S. and Farouque, K. (2016) AASP flooding as a substitute of ASP flooding for chemical eor in carbonate reservoirs. In: UNSPECIFIED.

Al-Khazraji, A.K. and Awang, M.B. (2016) Evaluation of miscible CO2-flooding to improve oil recovery in a clastic heterogeneous reservoir. In: UNSPECIFIED.

Bataee, M. and Irawan, S. and Ridha, S. and Hematpour, H. and Hamdi, Z. (2016) Effects of injection pressure on wellbore stress using flow-stress coupling method. In: UNSPECIFIED.

Ofei, T.N. and Al Bendary, R.M. (2016) Formulating water-based muds for high temperature wellbores using potassium formate brine and synthetic polymers: A design of experiment approach. In: UNSPECIFIED.

Takaijudin, H. and Ghani, A.A. and Zakaria, N.A. and Tze, L.L. (2016) Performance of Elaeis Guineensis Leaves Compost in Filter Media for Stormwater Treament Through Column Study. In: UNSPECIFIED.

Mathur, N. and Asirvadam, V.S. and Dass, S.C. and Gill, B.S. (2016) Generating vulnerability maps of dengue incidences for Petaling district in Malaysia. In: UNSPECIFIED.

Xiaoming, Z. and Sato, A. and Kudo, Y. and Nakamura, T. and Okitsu, J. and Aoki, H. and Majid, M.A.A. (2016) A case study of electric chiller performance bottleneck diagnosis by root cause analysis. In: UNSPECIFIED.

Nyamasvisva, T.E. and Yahya, N. and Hasbullah, H.B. and Rauf, M. and Rostami, A. and Dahy, E. (2016) Estimating Direct Waves with Respect to Receiver Offset, Antenna Current and Frequency in MCSEM. In: UNSPECIFIED.

Hasan, M.H. and Jaafar, J. and Aziz, I.A. and Rahim, L.A.B. (2016) A review on a high performance computing-based interval fuzzy type-2 model for web services' QoS evaluation. In: UNSPECIFIED.

Hong, K.W. and Foong, O.-M. and Low, T.J. (2016) Challenges in quantum key distribution: A review. In: UNSPECIFIED.

Zain, M.Z.M. and Rani, A.M.A. and Majid, M.A.A. (2016) Analysis of reconfigurable assembly system framing systems in automotive industry. In: UNSPECIFIED.

Joseph Ng, P.S. and Kang, C.M. and Mahmood, A.K. and Wong, S.W. and Phan, K.Y. and Saw, S.H. and Lim, J.T. (2016) EaaS: Available yet hidden infrastructure inside MSE. In: UNSPECIFIED.

Yussif, A.-S. and Ahmad, W.F.W. and Mustapha, E.E. (2016) The impact of electronic collaboration on learning outcomes. In: UNSPECIFIED.

Fageeri, S.O. and Ahmad, R. and Alhussian, H. (2016) A performance analysis of association rule mining algorithms. In: UNSPECIFIED.

Al-Arabiat, D. and Ahmad, W.F.W. and Sarlan, A. (2016) Cloud computing role to address Mobile Learning barriers: An exploratory study of HEIs in Malaysia. In: UNSPECIFIED.

Aziz, N.S.A. and Ahmad, W.F.W. and Hashim, A.S. (2016) Development phase of mobile numerical application for children with autism: Math4Autism. In: UNSPECIFIED.

Alhussian, H. and Zakaria, N. and Abdulkadir, S.J. and Fageeri, S.O. (2016) Performance evaluation of real-time multiprocessor scheduling algorithms. In: UNSPECIFIED.

Ullah, R. and Said, A.B.M. and Saleem, M.Q. and Jaafar, J. and Ullah, I. (2016) Semantic ontology for annotated images. In: UNSPECIFIED.

Sohail, A. and Dominic, P.D.D. (2016) Process warehouse based agent's competencies measurement method for business process improvement. In: UNSPECIFIED.

Tahir, H.M. and Said, A.M. and Osman, N.H. and Zakaria, N.H. and Sabri, P.N.M. and Katuk, N. (2016) Improving K-Means Clustering using discretization technique in Network Intrusion Detection System. In: UNSPECIFIED.

Al-Nuaimi, I.T.I. and Mahmood, A.K.B. and Mustapha, E.E. and Jebur, H.H. (2016) Measurement model of e-SQ dimensions and users' satisfaction in Malaysia IHL. In: UNSPECIFIED.

Yussiff, A.-L. and Suet-Peng, Y. and Baharudin, B.B. (2016) Human action recognition in surveillance video of a computer laboratory. In: UNSPECIFIED.

Hina, S. and Dominic, D.D. (2016) Information security policies: Investigation of compliance in universities. In: UNSPECIFIED.

Ali, A.A. and Dominic, P.D.D. (2016) Organizational and individual factors impact on knowledge sharing practice: The association with cost reduction. In: UNSPECIFIED.

Savita, K.S. and Dominic, P.D.D. and Ramayah, T. (2016) An insight on survey questionnaire design for Green SCM: Using cognitive interviewing method. In: UNSPECIFIED.

Marzuki, N.A. and Arshad, N.I. (2016) Understanding the use of e-Government portal in rural areas in Malaysia: A proposal towards a policy. In: UNSPECIFIED.

Usama, M. and Zakaria, N. (2016) Chaos-based secure data compression (CSDC). In: UNSPECIFIED.

Abubakar, M.Y. and Jung, L.T. and Zakaria, M.N. and Younesy, A. and Abdel-Atyz, A.-H. (2016) New universal gate library for synthesizing reversible logic circuit using genetic programming. In: UNSPECIFIED.

Mehmood, T. and Rais, H.B.Md. (2016) Machine learning algorithms in context of intrusion detection. In: UNSPECIFIED.

Qaiyum, S. and Aziz, I.A. and Jaafar, J.B. (2016) Analysis of Big Data and Quality-of-Experience in High-Density Wireless Network. In: UNSPECIFIED.

Sarlan, A. and Hashim, A.S. and Ahmad, R. and Ahmad, W.F.W. and Mahamad, S. and Basri, S. and Astrini, S. (2016) An interactive Islamic mobile application for children - 'Hidup Cara Rasullullah'. In: UNSPECIFIED.

Zulkafi, A.Z. and Basri, S. and Jung, L.T. and Ahmad, R. (2016) Android based car alert system. In: UNSPECIFIED.

Baashar, Y.M. and Mahomood, A.K. and Almomani, M.A. and Alkawsi, G.A. (2016) Customer relationship management (CRM) in healthcare organization: A review of ten years of research. In: UNSPECIFIED.

Gilal, A.R. and Jaafar, J. and Basri, S. and Omar, M. and Abro, A. (2016) Impact of software team composition methodology on the personality preferences of Malaysian students. In: UNSPECIFIED.

Savita, K.S. and Thivaanraj, Y.M. and Subarna, S. and Manoranjitham, M. (2016) User perception on environmental friendly practices among primary schoolchildren in Perak. In: UNSPECIFIED.

Madni, T.M. and Nayan, Y.B. and Sulaiman, S. and Abro, A. and Tahir, M. (2016) Usability evaluation of orientation techniques for medical image analysis using tabletop system. In: UNSPECIFIED.

Foong, O.-M. and Hong, K.-W. and Yong, S.-P. (2016) Droopy Mouth Detection Model in stroke warning. In: UNSPECIFIED.

Abdullahi, A.U. and Ahmad, R. and Zakaria, N.M. (2016) Big data: Performance profiling of Meteorological and Oceanographic data on Hive. In: UNSPECIFIED.

Ibrahim, A.M. and Baharudin, B. (2016) Classification of mammogram images using shearlet transform and kernel principal component analysis. In: UNSPECIFIED.

Usmani, M. and Adil, S.H. and Raza, K. and Ali, S.S.A. (2016) Stock market prediction using machine learning techniques. In: UNSPECIFIED.

Alabool, H.M. and Mahmood, A.K. (2016) An infrastructure as a service integrity requirements: An interview study. In: UNSPECIFIED.

Hassan, S. and Jaafar, J. and Khanesar, M.A. and Khosravi, A. (2016) Artificial bee colony optimization of interval type-2 fuzzy extreme learning system for chaotic data. In: UNSPECIFIED.

Hasan, M.H. and Jaafar, J. and Hassan, M.F. (2016) Fuzzy C-Means and two clusters' centers method for generating interval type-2 membership function. In: UNSPECIFIED.

Saedi, A. (2016) Cloud computing adoption framework: Innovation translation approach. In: UNSPECIFIED.

Rubab, S. and Hassan, M.F. and Mahmood, A.K. and Shah, S.N.M. (2016) Random Forest Forecast (RFF): One hour ahead jobs in volunteer grid. In: UNSPECIFIED.

Ling, L.W. and Ahmad, W.F.W. and Singh, T.K.R. (2016) Factors influencing behavioral intention to use computers among teachers. In: UNSPECIFIED.

Janjua, U.I. and Jaafar, J. and Lai, F.W. (2016) Expert's opinions on software project effective risk management. In: UNSPECIFIED.

Fadzillah, F.M. and Arshad, N.I. (2016) Evaluating the impact of non-medical m-health application: Towards development of a framework. In: UNSPECIFIED.

Maitra, S. and Dominic, P.D.D. (2016) Impact of supply chain integration and selective disintegration on supply chain efficiency and organization performance. In: UNSPECIFIED.

Shahabuddin, M.Z. and Hasbullah, H. and Aziz, I.A. (2016) Preliminary framework of topology control algorithm in WSN to achieve node's energy efficiency. In: UNSPECIFIED.

Malik, M.S.A. and Sulaiman, S. (2016) An analytical evaluation of information visualization factors for multiple electronic health records. In: UNSPECIFIED.

Haruna, A.A. and Jung, L.T. and Zakaria, M.N. and Haron, N.S. (2016) Green scheduling algorithm for a computational grid environment. In: UNSPECIFIED.

Abdulkadir, S.J. and Yong, S.-P. and Alhussian, H. (2016) An enhanced ELMAN-NARX hybrid model for FTSE Bursa Malaysia KLCI index forecasting. In: UNSPECIFIED.

Tomi, A.B. and Rambli, D.R.A. (2016) Automated calibration for optical see-through head mounted display using display screen space based eye tracking. In: UNSPECIFIED.

Ismail, N.N.B. and Arshad, N.I.B. and Zakaria, W.A.Z.W. and Jaafar, J.B. (2016) Exploring the talent mobility issue: Towards an intelligent system. In: UNSPECIFIED.

Yusuf, B.K. and Mahmood, A.K. and Sulaiman, S. (2016) Towards cryptanalysis of prime numbers. In: UNSPECIFIED.

Irshad, S. and Awang, D.R.B. (2016) User perception on Mobile Augmented Reality as a marketing tool. In: UNSPECIFIED.

Chouhan, M. and Hasbullah, H. (2016) Adaptive detection technique for Cache-based Side Channel Attack using Bloom Filter for secure cloud. In: UNSPECIFIED.

Sulaiman, S. and Okere, H.C. and Awang, D.R.R. and Mean, F.O. (2016) Expert review of the multimodal interaction model for Foot Reflexology VRST application. In: UNSPECIFIED.

Almomani, M.A. and Basri, S. and Mahmood, A.K.B. and Baashar, Y.M. (2016) An empirical analysis of software practices in Malaysian Small and Medium Enterprises. In: UNSPECIFIED.

Nurhadi, N.A. and Rahim, L.A. and Arshad, N.I. (2016) Analysis of domain specific modeling languages for strategy educational games design. In: UNSPECIFIED.

Joseph, A.K. and Radhamani, G. and Kallimani, V. (2016) Improving test efficiency through multiple criteria coverage based test case prioritization using modified heuristic algorithm. In: UNSPECIFIED.

Chern-Tong, H. and Aziz, I.B.A. (2016) A corrosion prediction model for oil and gas pipeline using CMARPGA. In: UNSPECIFIED.

Sangodiah, A. and Ahmad, R. and Ahmad, W.F.W. (2016) Integration of machine learning approach in item bank test system. In: UNSPECIFIED.

Bhattacharjee, S. and Rahim, L.B.A. and Aziz, I.B.A. (2016) A security scheme to minimize information loss during big data transmission over the internet. In: UNSPECIFIED.

Ibrahim, N.M. and Hassan, M.F. (2016) Translation model for cross-platform communication in SOA applications. In: UNSPECIFIED.

Zubir, W.M.A.M. and Aziz, I.A. and Haron, N.S. and Jaafar, J. and Mehat, M. (2016) CO2 corrosion rate determination mechanism implementing de Waard-Milliams model for oil & gas pipeline. In: UNSPECIFIED.

Selamat, M.H. and Rais, H.M. (2016) Enhancement on image face recognition using Hybrid Multiclass SVM (HM-SVM). In: UNSPECIFIED.

Asadi, S. and Hussin, A.R.C. and Saedi, A. (2016) Decision makers intention for adoption of Green Information Technology. In: UNSPECIFIED.

Adnan, M.H.M. and Hassan, M.F. and Aziz, I. and Paputungan, I.V. (2016) Protocols for agent-based autonomous negotiations: A review. In: UNSPECIFIED.

Kudiri, K.M. and Said, A.M. and Nayan, M.Y. (2016) Human emotion detection through speech and facial expressions. In: UNSPECIFIED.

Wagan, A.A. and Jung, L.T. (2016) An efficient distributed mobility management scheme for network mobility. In: UNSPECIFIED.

Nyamasvisva, T.E. and Hasbullah, H.B. and Yahya, N. and Nayan, Y.B. and Rostami, A. and Rauf, M. (2016) Computer algorithm for airwave prediction in marine controlled source electromagnetics data. In: UNSPECIFIED.

Zahari, A.S. and Rahim, L.A. and Mehat, M. (2016) A review of modelling languages for adventure educational games. In: UNSPECIFIED.

Ariffin, M.M. and Ahmad, W.F.W. and Sulaiman, S. (2016) Investigating the educational effectiveness of gamebased learning for IT education. In: UNSPECIFIED.

Jie, M. and Aziz, I.A. and Hasbullah, H. and Azizan, S.A.B. (2016) Handwritten digits recognition based on improved label propagation algorith. In: UNSPECIFIED.

Pirzada, N. and Nayan, M.Y. and Hassan, M.F. and Subhan, F. and Sakidin, H. (2016) WLAN location fingerprinting technique for device-free indoor localization system. In: UNSPECIFIED.

Azahari, I.N.N.A. and Ahmad, W.F.W. and Jamaludin, Z. and Hashim, A.S. (2016) The design of mobile social application for children with autism. In: UNSPECIFIED.

Khan, S. and Yong, S.-P. (2016) A comparison of deep learning and hand crafted features in medical image modality classification. In: UNSPECIFIED.

Jung, L.T. and Foong, O.-M. and Winata, P. (2016) Optimization of sensor deployment in data center. In: UNSPECIFIED.

Memon, P.Q. and Yong, S.-P. and Pao, W. (2016) Dynamic Surrogate Reservoir Model with well constraints. In: UNSPECIFIED.

Ibrahim, N. and Ahmad, W.F.W. and Shafe, A. (2016) Practitioners' validation on effectiveness of multimedia Mobile Learning Application for children. In: UNSPECIFIED.

Dominic, D.D. and Hina, S. (2016) Engaging university students in hands on learning practices and social media collaboration. In: UNSPECIFIED.

Basri, S. and Zaharin, M.S. and Mahamad, S. and Hashim, A.S. and Sarlan, A. (2016) Lightning distance mobile application lightning distance calculator. In: UNSPECIFIED.

Besrour, S. and Rahim, L.B.A. and Dominic, P.D.D. (2016) A quantitative study to identify critical requirement engineering challenges in the context of small and medium software enterprise. In: UNSPECIFIED.

Niknejad, N. and Ghani, I. and Hussin, A.R.C. and Saedi, A. (2016) Proposing a new framework for service oriented architecture adoption. In: UNSPECIFIED.

Kalid, K.S. and Hooi, Y.K. and Shan-Nice, K. (2016) KnowledgeFlood: Sharing volunteers' experience |on flood disaster using storytelling. In: UNSPECIFIED.

Hashim, A.S. and Yusoff, M.F.M. and Sarlan, A. and Mahamad, S. and Basri, S. (2016) Development of MyHomePharmacy: A personalized family medicine management. In: UNSPECIFIED.

Mukhtar, M.A.O. and Hassan, M.F.B. and Jaafar, J.B. and Rahim, L.A. (2016) A comparison study between WSDMDA and NDT methodologies using Quality Evaluation Framework. In: UNSPECIFIED.

Thangiah, M. and Basri, S. (2016) A preliminary analysis of various testing techniques in Agile development - A systematic literature review. In: UNSPECIFIED.

Mahamad, S. and Hipani, N.H. and Basri, S. and Hashim, A.S. and Sarlan, A. and Sulaiman, S. (2016) Development of Chinese language application in learning as a second language for Malaysian. In: UNSPECIFIED.

Besrour, S. and Rahim, L.B.A. and Dominic, P.D.D. (2016) Investigating requirement engineering techniques in the context of small and medium software enterprises. In: UNSPECIFIED.

Hasan, M.L.B. and Mohamed Khalid, M.N.B. (2016) Preparation of Nano-Scale Biopolymer Extracted from Coconut Residue and Its Performance as Drag Reducing Agent (DRA). In: UNSPECIFIED.

Hashim, A.M. and Shahruzzaman, D.B. (2016) Effectiveness of Mangrove Forest as Coastal Protection along the West Coast of Northern Peninsular Malaysia. In: UNSPECIFIED.

Farooqi, A.S. and Demong, A. and Sanaullah, K. and Sulaiman, S.A. and Rigit, A.R. and Saleh, S.F. and Gillani, S.J. and Khan, A. (2016) Effects of Swirl Bubble Injection on Mass Transfer and Hydrodynamics for Bubbly Flow Reactors: A Concept Paper. In: UNSPECIFIED.

Mohamad, W.F. and Khan, A.A. and Ahmad, F. and Yassin, A. (2016) Physical and Mechanical Properties of Ni-Cr based composites with addition of solid lubricants produced through powder metallurgy process. In: UNSPECIFIED.

Djuraev, U. and Jufar, S.R. and Vasant, P. (2016) Numerical Study of Frequency-dependent Seismoelectric Coupling in Partially-saturated Porous Media. In: UNSPECIFIED.

Wee, S.C. and Md Akhir, N.A. and Rozman, A.L. (2016) Investigation of Nanoparticles Dispersion in Sodium Hydroxide (NaOH) Solvent. In: UNSPECIFIED.

Syed Najmuddin, S.M.S. and Md Yusof, M.A. (2016) Screening of Geomechanical Risks for Malaysian Development Field. In: UNSPECIFIED.

Izzatie, N.I. and Basha, M.H. and Uemura, Y. and Mazlan, M.A. and Hashim, M.S.M. and Amin, N.A.M. and Hamid, M.F. (2016) Co-pyrolysis of rice straw and polypropylene using fixed-bed pyrolyzer. In: UNSPECIFIED.

Ooi, P.C. (2016) Reservoir modeling workflow of central luconia carbonate buildup. In: UNSPECIFIED.

Ooi, J.O. and Hussin, F.A.B. and Zakaria, N. (2016) Dual-Engine Cross-ISA DBTO Technique Utilising MultiThreaded Support for Multicore Processor System. In: UNSPECIFIED.

Khan, S. and Yong, S.-P. and Deng, J.D. (2016) Ensemble classification with modified SIFT descriptor for medical image modality. In: UNSPECIFIED.

Razali, R. and Khan, H. and Shafie, A. and Hassan, A.R. (2016) The relationship between energy consumption and economic growth in Malaysia: ARDL bound test approach. In: UNSPECIFIED.

Ghaedi, H. and Ayoub, M. and Bhat, A.H. and Mahmood, S.M. and Akbari, S. and Murshid, G. (2016) The effects of salt, particle and pore size on the process of carbon dioxide hydrate formation: A critical review. In: UNSPECIFIED.

Latiff, N.R.A. and Soleimani, H. and Zaid, H.M. and Adil, M. (2016) Magnetoviscous effect of ferrite-based magnetic fluid for EOR application. In: UNSPECIFIED.

Soleimani, H. and Latiff, N.R.A. and Zaid, H.M. and Yahya, N. and Sadrolhosseini, A.R. and Adil, M. (2016) Influence of cobalt substitution on the structural and magnetic properties of cobalt substituted magnetite. In: UNSPECIFIED.

Baig, M.K. and Soleimani, H. and Yahya, N. (2016) Domain wall motion and Barkhausen effect in magnetic nanoparticles for EOR applications. In: UNSPECIFIED.

Rehman, Z.U. and Yahya, N. and Shafie, A. and Soleimani, H. and Alqasim, B.H. and Irfan, M. and Qureshi, S. (2016) Band gap and conductivity evaluation of carbon nanotube with hematite for green ammonia synthesis. In: UNSPECIFIED.

Rehman, W.U. and Bhat, A.H. and Suliamon, A.A. and Khan, I.U. and Ullah, H. (2016) Effect of volumetric concentration of MWCNTs on the stability and thermal conductivity of nanofluids. In: UNSPECIFIED.

Zaid, H.M. and Adil, M. and Chuan, L.K. and Latiff, N.R.A. (2016) Stability and electrorheology of ZnO nanofluids in the presence of anionic surfactants. In: UNSPECIFIED.

Mahmoud, A.A. and Dass, S.C. and Muthuvalu, M.S. (2016) A maximum likelihood estimation framework for delay logistic differential equation model. In: UNSPECIFIED.

Jumbri, K. and Ahmad, H. and Abdulmalek, E. and Rahman, M.B.A. (2016) Biophysical properties of DNA in hydrated ionic liquids. In: UNSPECIFIED.

Hamid, H.H. and Zabidi, N.A.M. and Gholami, Z. and Shaharun, M.S. (2016) Comparison of preparation techniques for CoFeNb/CNTs catalyst. In: UNSPECIFIED.

Rahman, N.A.A. and Leveque, J.M. and Mutalib, M.I.A. and Ghani, N.A. and Thangarajoo, N. and Mazlan, F.A. and Farooq, A. and Irfan, N. and Duclaux, L. and Reinert, L. and Ondarts, M. (2016) Adsorption of indoor toxic gas by ionic liquid impregnated activated carbons. In: UNSPECIFIED.

Selvaraj, G. and Wilfred, C.D. and Eang, N.K. (2016) Recrystallized quinolinium ionic liquids for electrochemical analysis. In: UNSPECIFIED.

Hasni, M.M. and Majid, Z.A. and Senu, N. and Rajalingam, S. and Daud, H. and Daud, M.A. (2016) Direct fifth order block method for solving second order Neumann and singular perturbed boundary value problem. In: UNSPECIFIED.

Hussain, A. and Faye, I. and Muthuvalu, M.S. (2016) Performance analysis of successive over relaxation method for solving glioma growth model. In: UNSPECIFIED.

Tippa, S. and Narahari, M. and Pendyala, R. (2016) Unsteady natural convection flow of nanofluids past a semi-infinite isothermal vertical plate. In: UNSPECIFIED.

Mahdi, F.P. and Vasant, P. and Kallimani, V. and Abdullah-Al-Wadud, M. (2016) A review on economic emission dispatch problems using quantum computational intelligence. In: UNSPECIFIED.

Yunus, N.M. and Shaharun, M.S. and Mutalib, M.I.A. and Murugesan, T. (2016) Modeling of CO2 solubility in pyridinium-based ionic liquids using UNIQUAC. In: UNSPECIFIED.

Qayyum, A. and Shoaib, M. and Faye, I. and Kashif, A.R. (2016) Refinements of some new efficient quadrature rules. In: UNSPECIFIED.

Shoaib, M. and Basit, A. and Faye, I. (2016) Multi-resolution analysis for ear recognition using wavelet features. In: UNSPECIFIED.

Irfan, M. and Yahya, N. and Shafie, A. and Soleimani, H. and Alqasem, B. and Rehman, Z.U. and Qureshi, S. (2016) Evaluation of synthesis characterization and simulation study of magnetic nanoparticles for ammonia synthesis in MIM. In: UNSPECIFIED.

Abdullah, M. and Bidin, N. and Yasin, M. (2016) Fiber optic vibration sensor using bifurcated plastic optical fiber. In: UNSPECIFIED.

Yasar, M. and Mohamed, N.M. and Hamid, N.H. and Shuaib, M. (2016) Pressure sensor based on pristine multi-walled carbon nanotubes forest. In: UNSPECIFIED.

Habibullah and Wilfred, C.D. (2016) Ultrasonic-assisted extraction of essential oil from Botryophora geniculate using different extracting solvents. In: UNSPECIFIED.

Leveque, J.-M. and Aminuddin, N.F. and Kermanioryani, M. and Mutalib, M.I.A. and Lethesh, K.C. and Mazlan, F.A. (2016) An easy, green and ultra-fast synthesis of dicationic ionic liquids: From days to minutes. In: UNSPECIFIED.

Halim, N.S.A. and Zabidi, N.A.M. and Tasfy, S.F.H. and Shaharun, M.S. (2016) Morphology and performance of Cu/ZnO based catalyst: Comparison between Al2O3 and SiC support. In: UNSPECIFIED.

Lee, K. and Guan, B.H. and Zaid, H.M. and Soleimani, H. and Ching, D.L.C. (2016) Impact of pH on zinc oxide particle size by using sol-gel process. In: UNSPECIFIED.

Rostami, A. and Soleimani, H. and Yahya, N. and Nyamasvisva, T.E. and Rauf, M. (2016) A study of electric field components in shallow water and water half-space models in seabed logging. In: UNSPECIFIED.

Shoieb, M.A. and Sum, C.W. and Bhattachary, S.K. and Abidin, N.S.Z. and Abdelrahim, O.B. (2016) Shale gas characterization of the Dinder and Blue Nile Formations in the Blue Nile Basin, East Sudan. In: UNSPECIFIED.

Ibrahim, Y. and Padmanabhan, E. and Ano, A.B. and Ismail, W. (2016) Heat flow characterization and baseline of sandstone using infra-red thermography. In: UNSPECIFIED.

Mukhtar, S.M. and Daud, H. and Dass, S.C. (2016) Squared exponential covariance function for prediction of hydrocarbon in seabed logging application. In: UNSPECIFIED.

Zabidi, N.A.M. and Tasfy, S. and Shaharun, M.S. (2016) Hydrogenation of CO2 to methanol using copper/zinc oxide-based catalyst: Effect of active metal ratio. In: UNSPECIFIED.

Mumtaz, A. and Mohamed, N.M. and Saheed, M.S.M. and Yar, A. and Irshad, M.I. (2016) Enhanced photoelectrochemical activity by nanostructured V2O5/TiO2 bilayer. In: UNSPECIFIED.

Ghani, N.A. and Sairi, N.A. and Mat, A.N.C. and Khoubnasabjafari, M. and Jouyban, A. (2016) Density and molar volumes of imidazolium-based ionic liquid mixtures and prediction by the Jouyban-Acree model. In: UNSPECIFIED.

Najib, Y.N.A. and Daud, H. and Aziz, A.A. and Razali, R. (2016) 3-Dimensional wireless sensor network localization: A review. In: UNSPECIFIED.

Zaid, H.F.M. and Kait, C.F. and Mutalib, M.I.A. (2016) Integrated photooxidative extractive deep desulfurization using metal doped TiO2 and eutectic based ionic liquid. In: UNSPECIFIED.

Yar, A. and Dennis, J.O. and Mohamed, N.M. and Mian, M.U. and Irshad, M.I. and Mumtaz, A. (2016) Copper oxide nanowires as better performance electrode material for supercapacitor application. In: UNSPECIFIED.

Thiruchelvam, L. and Asirvadam, V.S. and Dass, S.C. and Daud, H. and Gill, B.S. (2016) Sliding window correlation analysis for dengue-climate variable relationship. In: UNSPECIFIED.

Yahya, E.A. and Zabidi, N.A.M. and Kait, C.F. (2016) A study on coke deposition in Ni-based catalysts for CO2 reforming of methane. In: UNSPECIFIED.

Pradeep, M.V.K. and Balbir, S.M.S. and Norani, M.M. (2016) Performance monitoring algorithm for optimizing electrical power generated by using photovoltaic system. In: UNSPECIFIED.

Matheswaran, P. and Wilfred, C.D. and Kurnia, K.A. and Ramli, A. (2016) Prediction of activity coefficient of sulfones at infinite dilution in ionic liquids and their modeling using COSMO-RS. In: UNSPECIFIED.

Khe, C.S. and Aziz, A. and Lockman, Z. and Rajalingam, S. and Merican, Z. and Vasant, P. (2016) Formation of raspberry like cobalt particles with hydrazine reduction in a polyol route. In: UNSPECIFIED.

Jahan, S. and Sakidin, H. and Nazar, R.M. (2016) MHD stagnation point flow over a stretching cylinder with variable thermal conductivity and joule heating. In: UNSPECIFIED.

Irfan, S.A. and Razali, R. and Shaari, K.Z.K. and Mansor, N. (2016) Modelling and simulations of controlled release fertilizer. In: UNSPECIFIED.

Zainuddin, N. and Ibrahim, Z.B. and Jamaludin, N. (2016) On the convergence of two point block backward differentiation formula for second order ODEs. In: UNSPECIFIED.

Yusuf, N.R. and Kamil, R.N.M. and Yusup, S. (2016) Kinetic study of microwave-assisted alkaline hydrolysis of Jatropha curcas oil. In: UNSPECIFIED.

Zaine, S.N.A. and Mohamed, N.M. (2016) MATLAB simulation of Mie scattering by hollow sphere TiO2 for dye solar cell application. In: UNSPECIFIED.

Ashraf, M. and Narahari, M. and Muthuvalu, M.S. (2016) Mixed convection flow over a stretching porous wedge with Newtonian heating in the presence of heat generation or absorption. In: UNSPECIFIED.

Shafie, A. and Pransisco, P. and Guan, B.H. and Annur, R. (2016) Synthesis and characterization of Ni0.5Zn0.4Cu0.1Fe2O4 as a magnetic feeder for electromagnetic transmitter application. In: UNSPECIFIED.

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Saheed, M.S.M. (2016) Highly oriented graphene growth and characterization. In: UNSPECIFIED.

Bel, T. and Ulku, G. and Kizilcan, N. and Cimenoglu, H. and Yahya, N. and Baydogan, N. (2016) Production of microencapsulate glycidyl methacrylate with melamine formaldehyde resin shell materials. In: UNSPECIFIED.

Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2016) Effect of electrode gap on the sensing properties of multiwalled carbon nanotubes based gas sensor. In: UNSPECIFIED.

Zahari, M.H.B. and Guan, B.H. and Chuan, L.K. (2016) Structural and magnetic properties of hexagonal barium ferrite synthesized through the sol-gel combustion route. In: UNSPECIFIED.

Rehman, M.J.U. and Dass, S.C. and Asirvadam, V.S. (2016) Nonlinear dynamical system identification using unscented Kalman filter. In: UNSPECIFIED.

Sulong, T.S.T. and Zabidi, N.A.M. and Shaharun, M.S. (2016) Pretreatment of carbon nanotubes: Effects on its properties and catalytic performances. In: UNSPECIFIED.

Joseph, E. and Singh, B.S.M. and Mohamed, N.M. and Kait, C.F. and Saheed, M.S.M. and Khatani, M. (2016) Investigating the performance of nitrogen-doped graphene photoanode in dye-sensitized solar cells. In: UNSPECIFIED.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Ullah, S. and Naz, M.Y. (2016) Effective CO2 adsorption on pristine and chemically functionalized MWCNTs. In: UNSPECIFIED.

Ismail, N.E.A. and Taha, M.F. and Ramli, A. (2016) Preparation and characterization activated carbon from rice husk and oil palm empty fruit bunches for removal of Zn2+ in aqueous solution. In: UNSPECIFIED.

Alqasem, B. and Yahya, N. and Soleimani, H. and Qureshi, S. and Irfan, M. and Rehman, Z.U. (2016) Experimental study on the effect of saturation magnetization of hematite nanocatalyst for green ammonia production. In: UNSPECIFIED.

Bade, L.A. and Dennis, J.O. and Khir, M.H.M. and Wen, W.P. (2016) RF-MEMS tunable interdigitated capacitor and fixed spiral inductor for band pass filter applications. In: UNSPECIFIED.

Mohamed, N.M. and Bashiri, R. and Kait, C.F. and Sufian, S. and Khatani, M. (2016) Investigation of photoconversion efficiency of Cu and Ni doped TiO2 thin film in photoelectrochemical cell. In: UNSPECIFIED.

Sardar, S. and Wilfred, C.D. and Marc, L.J. (2016) Synthesis of task specific and reusable protic ionic liquids for one-pot multicomponent syntheses. In: UNSPECIFIED.

Ahmed, M.G. and Dennis, J.-O. and Khir, M.-H. and Rabih, A. and Mian, M.U. (2016) Characterization of PolyMUMPs-based in-plane electromagnetic actuator. In: UNSPECIFIED.

Krishnan, S. and Quraishi, K.S. and Aminuddin, N.F. and Mazlan, F.A. and Leveque, J.-M. (2016) Biodegradability of immidazolium, pyridinium, piperidinium and pyrrolidinium based ionic liquid in different water source. In: UNSPECIFIED.

Rabih, A.A.S. and Dennis, J.O. and Khir, M.H.M. and Ahmed, M.G. and Mian, M.U. (2016) Design of PolyMUMPS device for diabetes screening via acetone vapor detection in exhaled breath. In: UNSPECIFIED.

Sakidin, H. and Jahan, S. and Nazar, R.M. (2016) Mixed convection flow past through a stretching cylinder with heat generation/absorption and convective boundary condition. In: UNSPECIFIED.

Mohammed, N.M. and Mumtaz, A. and Ansari, M.S. and Ahmad, R. (2016) Electrochemical study of the Pt and Pt-Ni upon multiwalled carbon nanotubes. In: UNSPECIFIED.

Nasrullah, A. and Bhat, A.H. and Isa, M.H. (2016) Lignin: A sustainable biosorbent for heavy metal adsorption from wastewater, a review. In: UNSPECIFIED.

Jamaludin, N. and Monsi, M. and Hassan, N. and Zainuddin, N. (2016) The performance of the IMSS2-5D procedure for simultaneous bounding of polynomial zeros. In: UNSPECIFIED.

Yahya, N. and Irfan, M. and Shafie, A. and Soleimani, H. and Alqasem, B. and Rehman, Z.U. and Qureshi, S. (2016) DFT study of gases adsorption on sharp tip nano-catalysts surface for green fertilizer synthesis. In: UNSPECIFIED.

Najib, Y.N.A. and Daud, H. and Aziz, A.A. and Razali, R. (2016) 3-Dimensional wireless sensor network localization: A review. In: UNSPECIFIED.

Lim, J.-W. and Lam, K.-Y. and Bashir, M.J.K. and Yeong, Y.-F. and Lam, M.-K. and Ho, Y.-C. (2016) Spent coffee grounds-based activated carbon preparation for sequestering of malachite green. In: UNSPECIFIED.

Adil, M. and Zaid, H.M. and Chuan, L.K. and Latiff, N.R.A. (2016) Effect of CMC on the stability of ZnO nanofluid at high temperature and salinity. In: UNSPECIFIED.

Khan, H.N. and Razali, R.B. and Shafei, A.B. (2016) On the relationship between health, education and economic growth: Time series evidence from Malaysia. In: UNSPECIFIED.

Batcha, S.R. and Sakidin, H. and Ahmad, A. (2016) Simpler Neill mapping function using nonlinear curve fitting method. In: UNSPECIFIED.

Chandran, K. and Sinnathambi, C.M. (2016) Rheological behavior on treated Malaysian crude oil. In: UNSPECIFIED.

Dass, S.C. and Lee, J. and Lee, K. (2016) Bayesian inference using two-stage Laplace approximation for differential equation models. In: UNSPECIFIED.

Hamed, Y. and Shafie, A. and Mustaffa, Z.B. and Idris, N.R.B. (2016) The effect of different weight functions on calibrating corrosion measurements using KNN technique. In: UNSPECIFIED.

Dahy, E. and Shafie, A. and Yahya, N. (2016) Magnetic field response of a new antenna design in planarly homogeneous layered media. In: UNSPECIFIED.

Shaharun, M.S. and Shaharun, S. and Al-Shaibani, A. (2016) Effect of zirconia on the physicochemical properties of copper (II) imidazolate frameworks. In: UNSPECIFIED.

Cheong, L.Y. and Ismail, A. and Tammam, M. and Yahya, N. (2016) Reliability of the single folding potential to describe the elastic scattering data of the p+43 Ca system. In: UNSPECIFIED.

Guan, B.H. and Zahari, M.H. and Chuan, L.K. (2016) Structural and magnetic properties of Ni1-xZnxFe2O4 synthesized through the sol-gel method. In: UNSPECIFIED.

Sakidin, H. and Batcha, S.R. and Ahmad, A. (2016) Simpler component of non-hydrostatic UNBabc mapping function using nonlinear curve fitting method. In: UNSPECIFIED.

Raju, S.S.K. and Narahari, M. and Pendyala, R. (2016) Mathematical modelling of unsteady MHD natural convection flow past a vertical plate with variable surface temperature and mass flux in the presence of radiation and chemical reaction. In: UNSPECIFIED.

Malik, U. and Ching, D.L.C. and Daud, H. and Januarisma, V. (2016) Modeling shales and marls reflections by autoregression method. In: UNSPECIFIED.

Merican, Z. and Vu, B.K. and Solovyeva, V.A. and Rodionov, V.O. and Khe, C.S. and Rajalingam, S. and Vasant, P. (2016) Fluorocarbon compatibilized gold-silica nanocomposites for recyclable regioselective hydroamination of alkynes in a fluorous biphasic system. In: UNSPECIFIED.

Rostami, A. and Soleimani, H. and Yahya, N. and Nyamasvisva, T.E. and Rauf, M. (2016) The impact of airwave on tangential and normal components of electric field in seabed logging data. In: UNSPECIFIED.

Rajalingam, S. and Vasant, P. and Khe, C.S. and Merican, Z. and Oo, Z. (2016) Optimization of injection molding process parameters for a plastic cell phone housing component. In: UNSPECIFIED.

Yi, L.Z. and Singh, B.S.M. and Ching, D.L.C. and Jin, C.L.E. (2016) Development of algorithm for single axis sun tracking system. In: UNSPECIFIED.

Karim, S.A.A. (2016) Data interpolation using rational cubic Ball spline with three parameters. In: UNSPECIFIED.

Narahari, M. and Raju, S.S.K. and Nagarani, P. (2016) Joule heating effects on unsteady natural convection flow near a moving semi-infinite vertical plate with variable heat flux and mass transfer. In: UNSPECIFIED.

Siddiqui, M.I. and Aziz, A.R.A. and Heikal, M.R. (2016) Dynamics of liquid slug using particle image velocimetry technique. In: UNSPECIFIED.

Bhat, A.H. and Dasan, Y.K. and Khan, I.U. and Ahmad, F. and Ayoub, M. (2016) Topological characterization of nanocrystalline cellulose reinforced Poly (lactic acid) and Poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) bionanocomposites. In: UNSPECIFIED.

Adjed, F. and Faye, I. and Ababsa, F. and Gardezi, S.J. and Dass, S.C. (2016) Classification of skin cancer images using local binary pattern and SVM classifier. In: UNSPECIFIED.

Muthuvalu, M.S. and Ali, M.K.M. and Sulaiman, J. (2016) Performance analysis of 2-Point explicit group iterative methods for solving four-point composite closed Newton-Cotes system. In: UNSPECIFIED.

Rizwan, M. and Dass, S.C. and Sagayan, V. (2016) Visualization and detection of spatio-temporal hot-spot and cluster for dengue in Petaling district, Malaysia. In: UNSPECIFIED.

Khan, I.U. and Bhat, A.H. and Masset, P.J. and Khan, F.U. and Rehman, W.U. (2016) Synthesis and characterization of palm oil fuel ash (POFA) and metakaolin based geopolymer for possible application in nanocoating. In: UNSPECIFIED.

Khan, Z. and Razali, R.B. and Daud, H. and Nor, N.M. and Firuzabad, M.F. (2016) State estimation of the power system using robust estimator. In: UNSPECIFIED.

Serasa, A.S. and Lai, G.T. and Rafek, A.G. and Simon, N. and Hussein, A. and Ern, L.K. and Surip, N. and Mohamed, T.R. (2016) Development of empirical correlation of peak friction angle with surface roughness of discontinuities using tilt test. In: UNSPECIFIED.

Sazali, S.S. and Bakar, Z.A. and Jaafar, J. (2016) Word prediction algorithm in resolving ambiguity in Malay text. In: UNSPECIFIED.

Indra, Z. and Jaafar, J. and Zamin, N. and Bakar, Z.A. (2016) A language identifier for Indonesian and Malay text document. In: UNSPECIFIED.

Hassan, S. and Khosravi, A. and Jaafar, J. (2016) The impact of FOU size and number of MFs on the prediction performance of Interval Type-2 Fuzzy Logic Systems. In: UNSPECIFIED.

Iqbal, M.J. and Faye, I. and Said, A.M. and Belhaouari Samir, B. (2016) Optimized tree-classification algorithm for classification of protein sequences. In: UNSPECIFIED.

Pirzada, N. and Nayan, M.Y. and Fadzil, M. and Subhan, F. (2016) A testbed for device free indoor localization system. In: UNSPECIFIED.

Ibrahim, B.M. and Hassan, M.F. (2016) A new customizable security framework for preventing WSDL attacks. In: UNSPECIFIED.

Al-Nuaimi, I.T.I. and Mahmood, A.K.B. and Mustapha, E.E. and Jebur, H.H. (2016) Analysis of significant dimensions of e-service quality in Malaysian universities. In: UNSPECIFIED.

Al-Shargie, F. and Tang, T.B. and Kiguchi, M. (2016) Mental stress grading based on fNIRS signals. In: UNSPECIFIED.

Hamed, Y. and Shafie, A. and Mustaffa, Z.B. and Idris, N.R.B. (2016) An application of K-Nearest Neighbor interpolation on calibrating corrosion measurements collected by two non-destructive techniques. In: UNSPECIFIED.

Wani, J.R. and Baheta, A.T. and Woldeyohannes, A.D. and Hassan, S. (2016) Analysis of Refrigeration Cycle Performance with an Ejector. In: UNSPECIFIED.

Mansor, R. and Kasim, M.M. and Othman, M. (2016) The framework of weighted subset-hood Mamdani fuzzy rule based system rule extraction (MFRBS-WSBA) for forecasting electricity load demand. In: UNSPECIFIED.

Ahmad, R.F. and Malik, A.S. and Amin, H.U. and Kamel, N. and Reza, F. (2016) Classification of cognitive and resting states of the brain using EEG features. In: UNSPECIFIED.

Mat-Shayuti, M.S. and Abdullah, M.Z. and Megat-Yusoff, P.S.M. (2016) THERMAL properties and morphology of Polypropylene/Polycarbonate/Polypropylene-Graft-Maleic anhydride blends. In: UNSPECIFIED.

Irfan, Sayed Ameenuddin and Razali, Radzuan and Shaari, Ku Zilati Ku and Mansor, Nurlidia (2016) Modelling and simulations of controlled release fertilizer. In: AIP Conference Proceedings.

Singh, KSM Jagindar and Elamvazuthi, I and Shaari, KZK and Lima, Fernando V (2016) PID tuning control strategy using Cuckoo search algorithm for pressure plant. In: 2016 6th International Conference on Intelligent and Advanced Systems (ICIAS).

Trinh, Thanh H and Ku Shaari, Ku Zilati (2016) Inverse modelling for prediction of coating material diffusivity and lag time of controlled-release coated urea granule. In: Defect and Diffusion Forum.

Lal, BHAJAN and Keong, LAU Kok and Bustam, MOHD AZMI and Sufian, SURIATI and Murugesan, THANABALAN (2016) Volumetric Properties of Alkali Salt in Aqueous 1-Butyl-3-Methylimidazolium Tetrafluoroborate at Various Temperatures. In: Advanced Materials Research.

Nasir, QAZI and Lal, BHAJAN and Keong, Lau Kok (2016) The Presence of additive mixtures (THF/SDS) on carbon dioxide rich gas mixture hydrate formation and dissociation conditions. In: Advanced Materials Research.

Divan, Jega and Lal, Bhajan and Sabil, Khalik M and Hammonds, Paul (2016) Capillary Force-Aided Gas Hydrate Growth in Shut-in Conditions. In: Advanced Materials Research.

Mahmood, HAMAYOUN and bin Ahmad Sayukhi, Muhammad Hafiz Arif and Moniruzzaman, MUHAMMAD and Yusup, SUZANA (2016) Synthesis of ionic liquid polymer incorporating activated carbon for carbon dioxide capture and separation. In: Advanced Materials Research.

Moniruzzaman, MUHAMMAD and Mahmood, HAMAYOUN and Ibrahim, MOHAMED FAROUK and Yusup, SUZANA and Uemura, YOSHIMITSU (2016) Effects of pressure and temperature on the dissolution of cellulose in ionic liquids. In: Advanced Materials Research.

Hani, Ahmad Fadzil Mohd and Feng, Ying-Xing and Tang, Tong Boon (2016) Working memory task performance on prefrontal cortex activation: An optical neuroimaging study. In: 2016 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES).

Lim, Lam Ghai and Tang, Tong Boon (2016) Design of concave capacitance sensor for void fraction measurement in gas-liquid flow. In: 2016 8th International Conference on Information Technology and Electrical Engineering (ICITEE).

Al-Shargie, Fares and Tang, Tong Boon and Kiguchi, Masashi (2016) Mental stress grading based on fNIRS signals. In: 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Rasheed, Waqas and Tang, Tong Boon and Hamid, Nor Hisham (2016) Threshold for computing generalized model of default mode network connectivity. In: 2016 6th International Conference on Intelligent and Advanced Systems (ICIAS).

Bhatti, Mehwish S and Rasheed, Waqas and Tang, Tong Boon and Laude, Augustinus (2016) Temporal comparison of ocular blood flow in quadrant divisions of optic nerve head before and after water drinking test. In: 2016 6th International Conference on Intelligent and Advanced Systems (ICIAS).

Bhatti, Mehwish S and Rasheed, Waqas and Tang, Tong Boon and Laude, Augustinus (2016) Investigating eye-strain due to prolonged exposure to low resolution multimedia using LSFG. In: 2016 6th International Conference on Intelligent and Advanced Systems (ICIAS).

Lim, Lam Ghai and Tang, Tong Boon and Hamid, Nor Hisham and Pao, William KS (2016) Sinusoid based calibration for holdup measurement in two-phase flow using helical capacitance sensor. In: 2016 6th International Conference on Intelligent and Advanced Systems (ICIAS).

Mian, Muhammad Umer and Dennis, John Ojur and Khir, M Haris M and Sutri, Nebyu Yonas and Ahmed, Abdelaziz Yousif and Tang, Tong Boon (2016) CMOS-MEMS resonator parametric variation analysis through equivalent circuit modeling. In: 2016 6th International Conference on Intelligent and Advanced Systems (ICIAS).

Al-Shargie, Fares and Tang, Tong Boon and Badruddin, Nasreen and Dass, Sarat C and Kiguchi, Masashi (2016) Mental stress assessment based on feature level fusion of fNIRS and EEG signals. In: 2016 6th International Conference on Intelligent and Advanced Systems (ICIAS).

Ali Hassan, Esra and Tang, Tong Boon (2016) Smart glasses for the visually impaired people. In: Computers Helping People with Special Needs: 15th International Conference, ICCHP 2016, Linz, Austria, July 13-15, 2016, Proceedings, Part II 15.

Al-Shargie, FM and Tang, Tong Boon and Badruddin, Nasreen and Kiguchi, Masashi (2016) Mental stress quantification using EEG signals. In: International Conference for Innovation in Biomedical Engineering and Life Sciences: ICIBEL2015, 6-8 December 2015, Putrajaya, Malaysia 1.