Browse by Type

Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | G | H | I | K | M | N | O | P | R | S | V | Y
Number of items: 54.

A

Aghamohammadi, N. and Aziz, H.A. and Isa, M.H. and Ghafari, S. (2005) Semi-aerobic leachate treatment with powdered activated carbon addition to activated sludge process. In: Symposium of Malaysian Chemical Engineers (SOMChE 2005) in conjunction with 2nd International Conference on Chemical and Bioprocess Engineering (ICCBPE 2005), School of Engineering & Information Technology, Universiti Malaysia Sabah, Sabah, Malaysia, December, 2005, Sabah, Malaysia.

Aziz, H.A. and Hussain, S. and Isa, M.H. and Asaari, F.A.H. and Adlan, M.N. (2005) Ammoniacal Nitrogen Removal from Synthetic Wastewater Using Limestone and Granular Activated Carbon in Batch Study. In: International Conference on Natural Resources and Environmental Management (NREM 2005), Institut Kimia Malaysia, Kuching, Sarawak, Malaysia, November, 2005, Kuching, Sarawak, Malaysia.

Ahmad, Murni M (2005) Design of Aqueous Two-Phase Extraction System for Protein Separation. In: AICHE Annual Meeting 2005, November 2005, Cincinnati, USA.

Abdullah, M. Z. and Loo, K.P. (2005) Adsorption–Desorption Study Using Pandanus Amaryllifolius Roxb (Pandanus Leaves). In: Environmental Health Risk 2005, 14 - 16 September 2005, Bologna, Italy.

Ahmad, Murni M (2005) Design of Aqueous Two-Phase Protein Separation Systems. In: International Conference on Biopartitioning and Purification (BPP 2005), June 2005, Amsterdam, Netherlands.

Al-Madhoun, W.A. and Jabieng, S.A. and Isa, M.H. and Asaari , F.A.H. and Aziz, H.A. and Farooqi, I.H. (2005) Co-composting of palm oil wastewater sludge and biosolids. In: International Conference – Water : Values & Rights, Palestine Academy for Science and Technology and Palestinian Water Authority, Palestine, May, 2005, Palestine.

Al-Madhoun, W.A. and Isa, M.H. and Ramli, N.A. and Adlan, M.N. and Hameed, B.H. and Farooqi, I.H. (2005) Cu and Zn removal by adsorption using ash from palm oil factory. In: International Conference – Water : Values & Rights, Palestine Academy for Science and Technology and Palestinian Water Authority, Palestine, May, 2005, Palestine.

Abdullah , Mohamad Zaki and Bickerton, Simon and Bhattacharyya, Debes (2005) ROTATIONAL MOLDING CYCLE TIME REDUCTION VIA EXTERIOR MOLD MODIFICATION. In: Annual Conference of the Society of Plastics Engineers, 1-5 May 2005, Boston, Massachusetts, USA.

Ahmad, Faiz and M. Hashim , Fakhruldin and Mamat, Othman (2005) Fiber Breakage in Metal Composites Processed by Powder Injection Moulding Technology. In: International Conference on Powder Metallurgy and Particulate Materials 2005, June 2005, Canada.

B

Bhattacharya, Arijit and Vasant, Pandian (2005) Disparate Level of Satisfaction in Intelligent TOC Product-Mix Decisions using Smooth Membership Function. In: 6th Asia Pacific Industrial Engineering & Management Conference (APIEMS) , 4-7 December 2005, Manila.

C

Chin, Yee Sing and Aris, M. Shiraz (2005) ENERGY FROM WASTE Development of Fuel Briquettes from Agricultural Waste. In: 16th International Invention Innovation Industrial Design & Technology Exhibition 2005, 19th - 21st May 2005, Kuala Lumpur.

D

Drieberg , Micheal and Yew, Kuan Min and Jeoti , Varun (2005) Low PAPR Subchannelization Preamble Design for Uplink Transmission in IEEE802.16 2004 OFDM PHY System. In: International Conference on Intelligent Systems (ICIS) 2005, 1-3 December 2005, Kuala Lumpur, Malaysia.

Drieberg , Micheal and Yew, Kuan Min and Jeoti , Varun (2005) Low PAPR Preamble for IEEE802.16a OFDM Systems. In: Malaysia International Conference on Communications and International Conference on Networks (MICC-ICON) 2005, 16-18 November, Kuala Lumpur, Malaysia.

Drieberg , Micheal and Yew, Kuan Min and Jeoti , Varun (2005) A New Practical MIMO Channel Estimation Technique for IEEE802.16a: Performance Analysis. In: IEEE TENCON 2005, 21-24 November, Melbourne, Australia.

G

Ghafari, S. and Aziz, H.A. and Isa, M.H. (2005) Coagulation process for semi-aerobic leachate treatment using poly-aluminum chloride. In: AEESEAP International Conference 2005, University of Malaya, Malaysia, June, 2005, Kuala Lumpur, Malaysia.

H

Harahap, I.S.H. (2005) An appraisal of expert system application for soil classificationusing CPT data. In: AWAM'07, 29-31 May 2007, Langkawi, Malaysia.

H., Zabiri and Y., Samyudia (2005) A study on the significance of backlash width values to the performance of the MIQP-based design of MPC. In: Proceedings of International Conference on Intelligent Systems (ICIS 2005), December 2005, Kuala Lumpur.

H., Zabiri and Y., Samyudia (2005) Sensitivity of MIQP-based design of MPC towards the uncertainty in backlash non-linearity gradient values. In: Proceedings of the International Symposium on Design, Operation and Control of Chemical Processes, 2005, Seoul, Korea.

H., Zabiri (2005) Multiple-shooting strategy for Optimal Control System Design of Differential-Algebraic equations systems. In: International conference of Chemical and Bio-process Engineering, ICCBPE 2005, December 2005, Sabah.

Hunter, A.W., (2005) “Paleoecology of Jurassic encrinites” reconstructing crinoid communities from the Jurassic of the western interior seaway. In: Geological Society of America Annual Meeting, Salt Lake City.

Hussin, Hilmi and Mokhtar, Ainul Akmar and Sebastian , Patrick (2005) Reducing operation defect using Six Sigma Tools. In: International Advanced Technology Congress (ATCi 2005), , Dec 6-8, 2005, Putrajaya, Kuala Lumpur .

I

Isa, M.H. and Aziz, H.A. and Asaari, F.A.H. and Abustan, I. (2005) Ni removal by adsorption using oil palm fibre. In: WaterMalaysia 2005, The Malaysian Water Association, Kuala Lumpur, Malaysia., April, 2005, Kuala Lumpur, Malaysia.

K

Kamel , Nidal (2005) Particle Swarm Optimization for Bluetooth Scatternet Formation. In: 2nd International Conference on Mobile Technology, Applications and Systems, 2005 , 15-17 Nov. 2005 , Guangzhou .

M

Mohamed Ramli, Nasser (2005) GCMC Simulation Adsorption of CO2 and CH4 on Activated Carbon. In: 2nd International Conference 19th SOMChe, 8-10 December 2005, UMS Kota Kinabalu.

Mohamed Ramli, Nasser (2005) Modeling and Cohen Coon Control of a Non-interacting Tanks in Series. In: ICIS conference, 1-3 December 2005, Sunway Lagoon Resort Hotel.

Mohd Nor, Nursyarizal and Baharudin , Z. (2005) Electrical Power System Modelling and Simulation Of Putrajaya Precint 5 Gas District Cooling Plant. In: International Conference on Intelligent Systems 2005 (ICIS 2005).

Md Khir, Mohd Haris and Mohd Nor, Nursyarizal (2005) AUTONOMOUS BALL FEEDER MOBILE ROBOT DESIGN. In: International Conference on Intelligent Systems 2005 (ICIS 2005).

Mohajeri, L. and Isa, M.H. and Aziz, H.A. and Zahed, M.A. and Nasrollahzadeh, H. (2005) Survey of petroleum hydrocarbons bioremediation in aquatic environment. In: South East Asia Conference on the Advancement of Scientific and Social Research (SEA-CSSR 2005), Unit for Research, Development & Commercialization (URDC), Universiti Teknologi MARA, Perlis, Malaysia, December, 2005, Perlis, Malaysia.

Mehrabi, H. and Ramli, N.A. and Zinatizadeh, A.A. and Isa, M.H. (2005) Prediction of air pollutant effects from external sources using Gaussian dispersion model. In: International Symposium and Exhibition on Geoinformation (ISG 2005), Universiti Sains Malaysia, Malaysia, September, 2005, Penang, Malaysia.

Mohamed Ramli, Nasser (2005) Modeling and Internal Model Control of a Flotation cell. In: 2nd International conference on Mechatronics, 10-12 May 2005, Kuala Lumpur.

Mohd Shukor, Mohd Nasir and Lo, H. H. and Sebastian , Patrick (2005) Implementation of Real-time Simple Edge Detection on FPGA. In: ICIS conference, 1-3 December 2005, Sunway Lagoon Resort Hotel.

M. S., Pasricha and M. Hashim, Fakhruldin (2005) Analysis of Parametrically Excited Instability in Damped Torsional Vibrations of Diesel Engine Systems. In: Proceedings of the National Seminar on Advances in Noise, Vibration and Comfort (NVC2005), May 2005, Kuala Lumpur, Malaysia.

Mokhtar, Ainul Akmar and Hussin, Hilmi and Abdul Hamid, A.H. (2005) Performance Test Methodology for a 5-Axis Machining Center. In: National Conference on Advances in Mechanical Engineering 2005 (NAME' 05), May 18-20, 2005 , Kuala Lumpur.

N

N. M., Ramli and A., Schroder and H., Zabiri and V. R. , Radhakrishnan (2005) Modelling and Internal Model Control of a Flotation Cell. In: Proceedings of the International Conference on Mechatronics, 2005, Kuala Lumpur.

Nidal S., Kamel (2005) Extracting Single Trial Visual Evoked Potentials using Selective Eigen-Rate Principal Components. In: 5th International Enformatika Conference, August 2005, Prague, Czech Republic.

Nuruddin, F and Mohd Shariff, Azmi and Kamaruddin, Ibrahim (2005) Engineering Students Industrial Internship Programme: A UTP Experience. In: International Conference on Engineering Education (ICEE) 2005, March 2005, Taina, Taiwan.

Nurhayati, Mellon (2005) Hydrodynamic characteristics of gas-liquid co-current up-flow in a packed bed reactor. In: SOMCHE 2005.

O

Osman, Sayed Ahmed and Ayoub, Mohammed Abdalla and Aggour, Mohamed Ahmed (2005) Artificial Neural Network Model for Predicting Bottomhole Flowing Pressure in Vertical Multiphase Flow. In: 14th SPE Middle East Oil & Gas Show and Conference, 12–15 March 2005, Bahrain.

P

Pisol Mat Isa , Muhammad and M. Hashim, Fakhruldin (2005) Pendidikan Islam Dalam Arus Moden: Kajian Cadangan Pendekatan Pengajian Akidah Kepada Pelajar Kejuruteraan. In: Prosiding Pendidikan Islam Ke Arah Kemanusiaan Sejagat, June 2005 , Melaka, Malaysia .

R

Renganathan, Sumathi (2005) The Use of English as a Social Practice: A study of Malaysian ESL Students. In: Language and Global Communication (LGC 2005) Conference, 7-9 July 2005, Cardiff University.

Renganathan, Sumathi (2005) Using English as a Social Practice and Its Relation to Identity Construction. In: The 2005 Conference of the International Society for Language Studies, 18-20 April 2005, Marriott Chateau Champlain, Quebec, Canada.

Rohani, Salleh and Halib , Mohammed (2005) SQUARE PEGS IN ROUND HOLES?: The Relevance of Western-Derived Performance Appraisal Models in an Eastern Setting. In: 2005 International Conference on Business and Information (BAI 2005) , 14 - 15 July 2005, Hong Kong.

Raja, Ananda Raja Dore and Zain Ali, Noohul Basheer and Hussin, Fawnizu Azmadi (2005) Optimization Of Twofish Encryption Algorithm On FPGA. In: International Conference on Intelligent Systems (ICIS'05), December 2005, Kuala Lumpur Malaysia.

S

Sambu Potty, Narayanan and M, Sirajuddin and K. Arjun, Vijil (2005) Wall Construction Using Substitute Materials. In: ICCREM 2005, 12 - 13 December 2005, Bayview Beach Resort, Penang, Malaysia.

Shamshad, A. and Azhari, M.N. and Isa, M.H. and Wan Hussin, W.M.A. and Sanusi, S.A.M. (2005) Rainfall erosivity from limited pluviographic data in a part of peninsular Malaysia. In: International Symposium and Exhibition on Geoinformation (ISG 2005), Universiti Sains Malaysia, Penang, Malaysia, September, 2005, Penang, Malaysia.

Shiraz, Mohd. Aris and Chin, Yee Sing (2005) ENERGY FROM WASTE DEVELOPMENT OF FUEL BRIQUETTES FROM AGRICULTURAL WASTE. In: 16th International Invention Innovation Industrial Design & Technology Exhibition 2005, 19th - 21st May 2005, Kuala Lumpur.

Sulaiman, S. A. and Lawes, M. and Marquez, N (2005) On Instabilities and Flame Structures of Laminar Aerosol Flames. In: European Combustion Meeting, April 2005, Louvain-la-Neuve, Belgium.

Sulaiman, S. A. and Horng, C. J. (2005) Determination of Drag and Lift using ANSYS CFD Flotran Simulation. In: 5th ASEAN ANSYS User Conference, April 2005, Singapore.

S., Yusup and Yusoff, Nooryusmiza and H., Zabiri and Shahirah, Ansary (2005) SEQUENTIAL MODELLING & OPTIMIZATION OF AMMONIA REACTOR. In: International conference of Chemical and Bio-process Engineering, ICCBPE 2005, December 2005, Sabah.

Salleh, Rohani and Halib, Mohammed (2005) THE CULTURAL PERSPECTIVE IN PERFORMANCE APPRAISAL: The Case of the Malaysian Banking Industry. In: UM_FBA ASian Business Cionference 2005, 14 - 15 April 2005, Kuala Lumpur.

Sufian, Suriati and Yusup, Suzana and Mohd Shariff, Azmi (2005) Prediction of Methane Adsorption Isotherm onto Activated Carbon by Using Neuro-fuzzy System. In: Chemical Engineering Conference, Australia (CHEMECA) 2005, September 2005, Sydney, Australia.

Shazi, Rahmat and Husiran , M. Faisal and Mohd Hashim , Fakhruldin (2005) Modelling the Internal Flow of a Scaled-up Diesel Injector Using ANSYS Flotran. In: The 5th ANSYS Asean User Conference, April 2005, Singapore.

V

Vasant, Pandian and Bhattacharya, Arijit (2005) Fuzzified TOC Product-Mix Decision for Measuring Level of Satisfaction. In: 4th International Conference on IT in Asia, Sarawak, Malaysia.

Y

Yew, Kuan Min and Drieberg , Micheal and Jeoti , Varun (2005) On PAPR Reduction in OFDM Systems: A Technique using Normalized Complex Hadamard Transform. In: IEEE TENCON, 21-24 November 2005, Melbourne, Australia.

This list was generated on Sat Mar 2 12:25:22 2024 +08.