Browse by Type

Group by: Creators | Item Type | No Grouping

Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z

Number of items: 894.

A

Afdhol, M.K. and Abdurrahman, M. and Hidayat, F. and Chong, F.K. and Mohd Zaid, H.F. (2019) Review of solvents based on biomass for mitigation of wax paraffin in Indonesian oilfield. Applied Sciences (Switzerland), 9 (24). (Submitted)

Abdullah, Bawadi and Syed Muhammad, Syed Anuar Faua'ad and Shokravi, Zahra and Ismail, Shahrul and Kassim, Khairul Anuar and Mahmood, Azmi Nik and Aziz, Md Maniruzzaman A (2019) Fourth generation biofuel: A review on risks and mitigation strategies. Renewable and Sustainable Energy Reviews, 107. pp. 37-50. ISSN 1364-0321

Alhussian, H. and Zakaria, N. and Patel, A. and Jaradat, A. and Abdulkadir, S.J. and Ahmed, A.Y. and Bahbouh, H.T. and Fageeri, S.O. and Elsheikh, A.A. and Watada, J. (2019) Investigating the schedulability of periodic real-time tasks in virtualized cloud environment. IEEE Access, 7. pp. 29533-29542.

Athar, Muhammad and Shariff, Azmi Mohd and Buang, Azizul (2019) A review of inherent assessment for sustainable process design. Journal of cleaner production, 233. pp. 242-263.

Athar, Muhammad and Shariff, Azmi Mohd and Buang, Azizul and Nazir, Salman and Hermansyah, Heri and See, Tan Lian (2019) Process equipment common attributes for inherently safer process design at preliminary design stage. Process Safety and Environmental Protection, 128. pp. 14-29.

Alnarabiji, Mohamad Sahban and Tantawi, Omar and Ramli, Anita and Zabidi, Noor Asmawati Mohd and Ghanem, Ouahid Ben and Abdullah, Bawadi (2019) Comprehensive review of structured binary Ni-NiO catalyst: Synthesis, characterization and applications. Renewable and Sustainable Energy Reviews, 114. p. 109326.

Aziz, Abd Rashid Abd and Hagos, Ftwi Y and Noor, MM and Kadirgama, Kumaran and Mamat, Rizalman and Abdullah, A Adam and others (2019) The Influence of Formulation Ratio and Emulsifying Settings on Tri-Fuel (Diesel--Ethanol--Biodiesel) Emulsion Properties. Energies, 12 (9). pp. 1-24.

Azhari, Nurul Khaliesah Kamal and Bustam, Mohamad Azmi and Hamon, Lomig and Pre, Pascaline (2019) Indexing PXRD structural parameters of graphene oxide-doped metal-organic frameworks. International Journal of Recent Technology and Engineering, 8 (2S9). pp. 550-553.

Ali, S. and Abdul Rani, A.M. and Altaf, K. and Hussain, P. and Prakash, C. and Hastuty, S. and Rao, T.V.V.L.N. and Aliyu, A.â��A.A. and Subramaniam, K. (2019) Investigation of alloy composition and sintering parameters on the corrosion resistance and microhardness of 316L stainless steel alloy. Lecture Notes in Mechanical Engineering. pp. 532-541. ISSN 21954356

Abdul Aziz, A.R. and Adlan Abdullah, M. and Firmansyah and Abidin, E.Z.Z. (2019) Performance of hydrogen direct injection engine. SpringerBriefs in Applied Sciences and Technology. pp. 21-36. ISSN 2191530X

Abd Majid, Mohd Amin and Haji Ya, Hamdan and Mamat, Othman and Mahadzir, Shuhaimi (2019) Techno economic evaluation of cold energy from Malaysian liquefied natural gas regasification terminals. Energies, 12 (23). p. 4475.

Athar, Muhammad and Shariff, Azmi Mohd and Buang, Azizul and Shaikh, Muhammad Shuaib and See, Tan Lian (2019) Inherent safety for sustainable process design of process piping at the preliminary design stage. Journal of Cleaner Production, 209. pp. 1307-1318.

Ahmad, F and Azmi, M and Mustaza, N (2019) Soil mapping of slope failure due to rainfall at USM Hostels Penang. Japanese Geotechnical Society Special Publication, 6 (2). pp. 88-91.

Athar, Muhammad and Mohd Shariff, Azmi and Buang, Azizul and Shuaib Shaikh, Muhammad and Ishaq Khan, Muhammad (2019) Review of process industry accidents analysis towards safety system improvement and sustainable process design. Chemical Engineering & Technology, 42 (3). pp. 524-538.

Akbarzadeh, O. and Mohd Zabidi, N.A. and Abdul Wahab, Y. and Hamizi, N.A. and Chowdhury, Z.Z. and Merican Aljunid Merican, Z. and Rahman, M.A. and Akhter, S. and Shalauddin, M. and Johan, M.R. (2019) Effects of cobalt loading, particle size, and calcination condition on Co/CNT catalyst performance in Fischer-Tropsch reactions. Symmetry, 11 (1).

Abbas, M.K. and Tong, B. and Abdulla, R. (2019) An enhanced context-aware face recognition alert system for people with hearing impairment. Advances in Intelligent Systems and Computing, 843. pp. 696-708.

Akbarzadeh, O. and Zabidi, N.A.M. and Hamizi, N.A. and Wahab, Y.A. and Merican, Z.M.A. and Yehya, W.A. and Akhter, S. and Shalauddin, M. and Rasouli, E. and Johan, M.R. (2019) Effect of pH, acid and thermal treatment conditions on Co/CNT catalyst performance in fischer-tropsch reaction. Symmetry, 11 (1).

Al-Tashi, Q. and Rais, H. and Jadid, S. (2019) Feature selection method based on grey wolf optimization for coronary artery disease classification. Advances in Intelligent Systems and Computing, 843. pp. 257-266.

Abd Ghani, Nur Azeanni and Azapour, Abbas and Muhammad, Anuar Fauaâ��ad Syed and Abdullah, Bawadi (2019) Dry reforming of methane for hydrogen production over NiCo catalysts: Effect of NbZr promoters. international journal of hydrogen energy, 44 (37). pp. 20881-20888.

Awad, Ali and Masiran, Nurliyana and Salam, M Abdus and Vo, Dai-Viet N and Abdullah, Bawadi (2019) Non-oxidative decomposition of methane/methanol mixture over mesoporous Ni-Cu/Al2O3 Co-doped catalysts. International journal of hydrogen energy, 44 (37). pp. 20889-20899.

Abdullah, Bawadi and Awad, Ali (2019) 4 Recent Clean Hydrogen. Fossil Free Fuels: Trends in Renewable Energy. p. 55.

Aliyu, A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Rao, T.V.V.L. and Axinte, E. and Ali, S. and Ramli, M.N. (2019) Hydroxyapatite electro discharge coating of Zr-based bulk metallic glass for potential orthopedic application. Key Engineering Materials, 796. pp. 123-128.

Alkhatib, M.F.R. and Bahrudin, N.A. and Salleh, H.M. and Nasef, M.M.E. and Ting, T.M. (2019) Lipase immobilization on fibers grafted with polyglycidyl methachrylate. IIUM Engineering Journal, 20 (1). pp. 12-23.

Amiruddin, Ahmad Azharuddin Azhari Mohd and Zabiri, Haslinda and Jeremiah, Sean Suraj and Teh, Weng Kean and Kamaruddin, Bashariah (2019) Valve stiction detection through improved pattern recognition using neural networks. Control Engineering Practice, 90. pp. 63-84.

Aliyu, A.â��A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Prakash, C. and Rao, T.V.V.L.N. and Axinte, E. and Ali, S. (2019) Synthesis and characterization of bioceramic oxide coating on Zr-Ti-Cu-Ni-Be BMG by electro discharge process. Lecture Notes in Mechanical Engineering. pp. 518-531.

Abdulkadir, T.S. and Muhammad, R.U.M. and Wan Yusof, K. and Ahmad, M.H. and Aremu, S.A. and Gohari, A. and Abdurrasheed, A.S. (2019) Quantitative analysis of soil erosion causative factors for susceptibility assessment in a complex watershed. Cogent Engineering, 6 (1).

Abdul Latiff, A.H. and Khalil, A.E. (2019) Crustal thickness and velocity structure of Malay Peninsula inferred from joint inversion of receiver functions and surface waves dispersion. Journal of Asian Earth Sciences, 169. pp. 105-116.

Abdul Mannan, Hafiz and Yih, Tan Ming and Nasir, Rizwan and Muhktar, Hilmi and Mohshim, Dzeti Farhah (2019) Fabrication and characterization of polyetherimide/polyvinyl acetate polymer blend membranes for CO2/CH4 separation. Polymer Engineering & Science, 59 (S1). E293-E301.

Adnan, M.H. and Hassan, M.F. and Aziz, I.A. and Rashid, N.A. (2019) A survey and future vision of double auctions-based autonomous cloud service negotiations. Advances in Intelligent Systems and Computing, 843. pp. 488-498.

Abdullah, L. and Ramli, R. and Bakodah, H.O. and Othman, M. (2019) Developing a causal relationship among factors of e-commerce: A decision making approach. Journal of King Saud University - Computer and Information Sciences.

Amin Abd Majid, M. and Ismail, I. (2019) Localization of gas turbine maintenance by Malaysian gas turbine owners and operators. SpringerBriefs in Applied Sciences and Technology. pp. 43-51.

Azarpour, A. and Zendehboudi, S. and Yusup, S. and Khalid, A. and Zhang, Y. (2019) Effects of ultrasonic cavitation on neutralization process of low molecular weight polyethylene glycol. Canadian Journal of Chemical Engineering, 97 (1). pp. 395-405.

Adnan, N. and Md Nordin, S. and Bin Bahruddin, M.A. (2019) Sustainable interdependent networks from smart autonomous vehicle to intelligent transportation networks. Studies in Systems, Decision and Control, 186. pp. 121-134.

Abdul Mannan, H. and Yih, T.M. and Nasir, R. and Muhktar, H. and Mohshim, D.F. (2019) Fabrication and characterization of polyetherimide/polyvinyl acetate polymer blend membranes for CO2/CH4 separation. Polymer Engineering and Science, 59. E293-E301.

Abbas, M.K. and Jung, L.T. and Mahmood, A.K. and Abdulla, R. (2019) Intelligent Software Agents for Managing Road Speed Offences. Advances in Intelligent Systems and Computing, 984. pp. 180-191.

Ali, Y. and Padmanabhan, E. (2019) Prediction of lamination patterns in Heterolithic sedimentary sequence, offshore Sarawak (Malaysia). Advances in Science, Technology and Innovation. pp. 203-205.

Ahmad, W.F.W. and Sarlan, A. and Rauf, N.A. (2019) ESCAPE: Interactive fire simulation and training for children using virtual reality. Advances in Intelligent Systems and Computing, 843. pp. 670-679.

Aziz, N.S.A. and Ahmad, W.F.W. and Hashim, A.S. (2019) A study on mobile applications developed for children with autism. Advances in Intelligent Systems and Computing, 843. pp. 772-780.

Ali, Y. and Padmanabhan, E. and Andriamihaja, S. and Faisal, A. (2019) Spatial variations prediction in carbonate porosity using artificial neural network: Subis Limestones, Sarawak, Malaysia. Advances in Science, Technology and Innovation. pp. 189-191.

Al-Kayiem, H.H. and Aurybi, M.A. and Gilani, S.I.U. and Ismaeel, A.A. and Mohammad, S.T. (2019) Performance evaluation of hybrid solar chimney for uninterrupted power generation. Energy. pp. 490-505.

Abubakar Imam, A. and Basri, S. and Ahmad, R. and GonzÃ¡lez-Aparicio, M.T. (2019) Literature Review on Database Design Testing Techniques. Advances in Intelligent Systems and Computing, 984. pp. 1-13.

Abdul Aziz, A.R. and Adlan Abdullah, M. and Firmansyah and Abidin, E.Z.Z. (2019) Performance of hydrogen direct injection engine. SpringerBriefs in Applied Sciences and Technology. pp. 21-36.

Anjum, H. and Johari, K. and Gnanasundaram, N. and Appusamy, A. and Thanabalan, M. (2019) Impact of surface modification on adsorptive removal of BTX onto activated carbon. Journal of Molecular Liquids, 280. pp. 238-251.

Abd Manan, T.S.B. and Khan, T. and Sivapalan, S. and Jusoh, H. and Sapari, N. and Sarwono, A. and Ramli, R.M. and Harimurti, S. and Beddu, S. and Sadon, S.N. and Kamal, N.L.M. and Malakahmad, A. (2019) Application of response surface methodology for the optimization of polycyclic aromatic hydrocarbons degradation from potable water using photo-Fenton oxidation process. Science of the Total Environment, 665. pp. 196-212.

Al-Kayeim, H.H. and Aurybi, M.A. and Gilani, S.I.U. (2019) Influence of canopy condensate film on the performance of solar chimney power plant. Renewable Energy, 136. pp. 1012-1021.

Al-Husaini, I.S. and Yusoff, A.R.M. and Lau, W.J. and Ismail, A.F. and Al-Abri, M.Z. and Al-Ghafri, B.N. and Wirzal, M.D.H. (2019) Fabrication of polyethersulfone electrospun nanofibrous membranes incorporated with hydrous manganese dioxide for enhanced ultrafiltration of oily solution. Separation and Purification Technology. pp. 205-214.

Ahmad, N.A. and Jumbri, K. and Ramli, A. and Ghani, N.A. and Ahmad, H. and Kassim, M.A. (2019) Synthesis, characterisation and antioxidant properties of ferulate-based protic ionic liquids: Experimental and modelling approaches. Journal of Molecular Liquids, 278. pp. 309-319.

Ameen, M. and Azizan, M.T. and Ramli, A. and Yusup, S. and Alnarabiji, M.S. (2019) Catalytic hydrodeoxygenation of rubber seed oil over sonochemically synthesized Ni-Mo/Î³-Al2O3 catalyst for green diesel production. Ultrasonics Sonochemistry, 51. pp. 90-102.

Abbasi, A.Z. and Ting, D.H. and Hlavacs, H. and Costa, L.V. and Veloso, A.I. (2019) An empirical validation of consumer video game engagement: A playful-consumption experience approach. Entertainment Computing, 29. pp. 43-55.

Athar, M. and Mohd Shariff, A. and Buang, A. and Shuaib Shaikh, M. and Ishaq Khan, M. (2019) Review of Process Industry Accidents Analysis towards Safety System Improvement and Sustainable Process Design. Chemical Engineering and Technology, 42 (3). pp. 524-538.

Albahri, T.A. and Khor, C.S. and Elsholkami, M. and Elkamel, A. (2019) A mixed integer nonlinear programming approach for petroleum refinery topology optimisation. Chemical Engineering Research and Design. pp. 24-35.

Anjum, H. and Johari, K. and Gnanasundaram, N. and Ganesapillai, M. and Arunagiri, A. and Regupathi, I. and Thanabalan, M. (2019) A review on adsorptive removal of oil pollutants (BTEX) from wastewater using carbon nanotubes. Journal of Molecular Liquids, 277. pp. 1005-1025.

Amiri, I.S. and Anwar, T. and Vigneswaran, D. and Yupapin, P. (2019) Ultra-short bandwidth optical tweezer generation using GaAs ring resonator system. Results in Physics, 12. pp. 1606-1609.

Abbasi, A. and Nasef, M.M. and Kheawhom, S. and Faridi-Majidi, R. and Takeshi, M. and Abouzari-Lotf, E. and Choong, T. (2019) Amine functionalized radiation induced grafted polyolefin nanofibers for CO2 adsorption. Radiation Physics and Chemistry, 156. pp. 58-66.

Ahmad, H. and Zaharudin, N.S. and Majid, N.N.A. and Jumbri, K. and Rahman, M.B.A. (2019) Synthesis and characterization of new choline-based ionic liquids and their antimicrobial properties. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (2). pp. 124-132.

Arshad, S. and Ahmad, M. and Saboor, A. and Ibrahim, F.H. and Mustafa, M.R.U. and Zafar, M. and Ashfaq, S. (2019) Role of trees in climate change and their authentication through scanning electron microscopy. Microscopy Research and Technique, 82 (2). pp. 92-100.

Athar, M. and Shariff, A.M. and Buang, A. and Shaikh, M.S. and See, T.L. (2019) Inherent safety for sustainable process design of process piping at the preliminary design stage. Journal of Cleaner Production, 209. pp. 1307-1318.

Abouzari-Lotf, E. and Zakeri, M. and Nasef, M.M. and Miyake, M. and Mozarmnia, P. and Bazilah, N.A. and Emelin, N.F. and Ahmad, A. (2019) Highly durable polybenzimidazole composite membranes with phosphonated graphene oxide for high temperature polymer electrolyte membrane fuel cells. Journal of Power Sources. pp. 238-245.

Albahri, T.A. and Al-Sharrah, G. and Khor, C.S. and Elkamel, A. (2019) Grassroots petroleum refinery configuration for heavy oil processing. Petroleum Science and Technology, 37 (3). pp. 275-281.

Al-Swai, B.M. and Osman, N. and Alnarabiji, M.S. and Adesina, A.A. and Abdullah, B. (2019) Syngas Production via Methane Dry Reforming over Ceria-Magnesia Mixed Oxide-Supported Nickel Catalysts. Industrial and Engineering Chemistry Research, 58 (2). pp. 539-552.

Almahasneh, H. and Kamel, N. and Khan, D.M. (2019) Variation in brain's effective connectivity due to driving using partial directed coherence. Proceedings - 2018 IEEE International Conference on Automatic Control and Intelligent Systems, I2CACIS 2018. pp. 67-70.

Ali, E.M. and Yahaya, N.Z. and Nallagownden, P. and Alqasem, B.H. (2019) Enhanced Dickson voltage multiplier rectenna by developing analytical model for radio frequency harvesting applications. International Journal of RF and Microwave Computer-Aided Engineering, 29 (1).

Abdul Aziz, A.R. and Adlan Abdullah, M. and Firmansyah and Abidin, E.Z.Z. (2019) Performance of hydrogen direct injection engine. SpringerBriefs in Applied Sciences and Technology. pp. 21-36.

Amin Abd Majid, M. and Ismail, I. (2019) Localization of gas turbine maintenance by Malaysian gas turbine owners and operators. SpringerBriefs in Applied Sciences and Technology. pp. 43-51.

Afiq, A.A. and Zakariya, M.A. and Saad, M.N. and Nurfarzana, A.A. and Khir, M.H.M. and Fadzil, A.F. and Jale, A. and Gunawan, W. and Izuddin, Z.A.A. and Faizari, M. (2019) A review on classifying abnormal behavior in crowd scene. Journal of Visual Communication and Image Representation, 58. pp. 285-303.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Nikbakht, E. (2019) Incorporation of waste materials in the manufacture of masonry bricks: An update review. Journal of Building Engineering, 21. pp. 37-54.

Aziz, N.S.A. and Ahmad, W.F.W. and Hashim, A.S. (2019) A study on mobile applications developed for children with autism. Advances in Intelligent Systems and Computing, 843. pp. 772-780.

Alazzawi, A.K. and Rais, H.M. and Basri, S. (2019) Hybrid Artificial Bee Colony Algorithm for t-Way Interaction Test Suite Generation. Advances in Intelligent Systems and Computing, 984. pp. 192-199.

Ali, Y. and Padmanabhan, E. (2019) Prediction of lamination patterns in Heterolithic sedimentary sequence, offshore Sarawak (Malaysia). Advances in Science, Technology and Innovation. pp. 203-205.

Abdul Aziz, A.R. and Adlan Abdullah, M. and Firmansyah and Abidin, E.Z.Z. (2019) Performance of hydrogen direct injection engine. SpringerBriefs in Applied Sciences and Technology. pp. 21-36.

Amin Abd Majid, M. and Ismail, I. (2019) Localization of gas turbine maintenance by Malaysian gas turbine owners and operators. SpringerBriefs in Applied Sciences and Technology. pp. 43-51.

Ahmad, F. and Ullah, S. and Merican, N.H.B.H. and OÃ±ate, E. and Al-Sehemi, A.G. and Yeoh, G.H. (2019) An investigation on thermal performance of wollastonite and bentonite reinforced intumescent fire-retardant coating for steel structures. Construction and Building Materials, 228.

Ahmad, M. and Bt Khairul, N.E. (2019) Comparative study of permeability in sandstones and shales-using mercury injection capillary pressure (MICP) technique. ARPN Journal of Engineering and Applied Sciences, 14 (24). pp. 4200-4207.

Al-Qadami, E.H.H. and Abdurrasheed, A.S. and Mustaffa, Z. and Yusof, K.W. and Malek, M.A. and Ghani, A.A. (2019) Numerical modelling of flow characteristics over sharp crested triangular hump. Results in Engineering, 4.

Anwar, A. and Mohammed, B.S. and Liew, M.S. and Wahab, M.A. and Zawawi, N.A.W.A. (2019) Below-Grade Sulfur Storage Pits in Oil Refineries: A Review. Journal of Failure Analysis and Prevention, 19 (6). pp. 1745-1760.

Aziz, A.F.A. and Romlie, M.F. and Zulkifli, T.Z.A. (2019) CLL/S detuned compensation network for electric vehicles wireless charging application. International Journal of Power Electronics and Drive Systems, 10 (4). pp. 2173-2181.

Abdul Aziz, A.F. and Romlie, M.F. and Baharudin, Z. (2019) Review of inductively coupled power transfer for electric vehicle charging. IET Power Electronics, 12 (14).

Al-Sabaeei, A. and Md. Yussof, N.I. and Napiah, M. and Sutanto, M. (2019) A review of using natural rubber in the modification of bitumen and asphalt mixtures used for road construction. Jurnal Teknologi, 81 (6). pp. 81-88.

Ali, F.A.M. and Karim, S.A.A. and Dass, S.C. and Skala, V. and Saaban, A. and Hasan, M.K. and Hashim, I. (2019) New cubic timmer triangular patches with C1 and G1 continuity. Jurnal Teknologi, 81 (6). pp. 1-11.

Ali, M. and Ahmad, F. (2019) A review of processing techniques for Fe-Ni soft magnetic materials. Materials and Manufacturing Processes, 34 (14). pp. 1580-1604.

Abdulrahman, S. and Hainin, M.R. and Satar, M.K.I.M. and Hassan, N.A. and Usman, A. (2019) Rutting and moisture damage evaluation of warm mix asphalt incorporating POFA modified bitumen. International Journal of Engineering and Advanced Technology, 9 (1). pp. 90-98.

Athar, M. and Shariff, A.M. and Buang, A. (2019) A review of inherent assessment for sustainable process design. Journal of Cleaner Production, 233. pp. 242-263.

Ahmad, F. and Draz, M.U. and Su, L. and Rauf, A. (2019) Taking the bad with the good: The nexus between tourism and environmental degradation in the lower middle-income Southeast Asian economies. Journal of Cleaner Production, 233. pp. 1240-1249.

Abdul Karim, Z.A. and Khan, M.Y. and Aziz, A.R.A. (2019) Evolution of Microexplosion Phenomenon in Parent-Child Droplets of Water in Biodiesel Emulsions Enhanced by Different Surfactant Dosages and Hydrophilic-Lipophilic Balance Values. Journal of Energy Resources Technology, Transactions of the ASME, 141 (10).

Aljuboori, F.A. and Lee, J.H. and Elraies, K.A. and Stephen, K.D. (2019) Gravity drainage mechanism in naturally fractured carbonate reservoirs; review and application. Energies, 12 (19).

Ali, S.M. and Jeoti, V. and Saeidi, T. and Wen, W.P. (2019) Design of compact microstrip patch antenna for WBAN applications at ISM 2.4 GHz. Indonesian Journal of Electrical Engineering and Computer Science, 15 (3). pp. 1509-1516.

Athar, M. and Shariff, A.M. and Buang, A. (2019) A review of inherent assessment for sustainable process design. Journal of Cleaner Production, 233. pp. 242-263.

Aljuboori, F.A. and Lee, J.H. and Elraies, K.A. and Stephen, K.D. (2019) Gravity drainage mechanism in naturally fractured carbonate reservoirs; review and application. Energies, 12 (19).

Adebayo, L.L. and Soleimani, H. and Yahya, N. and Abbas, Z. and Ridwan, A.T. and Wahaab, F.A. (2019) Investigation of the broadband microwave absorption of citric acid coated Fe3O4/PVDF composite using finite element method. Applied Sciences (Switzerland), 9 (18).

Ali, A. and Nasir, M.A. and Khalid, M.Y. and Nauman, S. and Shaker, K. and Khushnood, S. and Altaf, K. and Zeeshan, M. and Hussain, A. (2019) Experimental and numerical characterization of mechanical properties of carbon/jute fabric reinforced epoxy hybrid composites. Journal of Mechanical Science and Technology, 33 (9). pp. 4217-4226.

Ayinla, R.T. and Dennis, J.O. and Zaid, H.M. and Sanusi, Y.K. and Usman, F. and Adebayo, L.L. (2019) A review of technical advances of recent palm bio-waste conversion to activated carbon for energy storage. Journal of Cleaner Production, 229. pp. 1427-1442.

Athar, M. and Shariff, A.M. and Buang, A. and Nazir, S. and Hermansyah, H. and See, T.L. (2019) Process equipment common attributes for inherently safer process design at preliminary design stage. Process Safety and Environmental Protection, 128. pp. 14-29.

Al-Bared, M.A.M. and Harahap, I.S.H. and Marto, A. and Abad, S.V.A.N.K. and Ali, M.O.A. (2019) Undrained shear strength and microstructural characterization of treated soft soil with recycled materials. Geomechanics and Engineering, 18 (4). pp. 427-437.

Ahmad, A. and Hashim, U.K.M. and Abd Wahid, R. and Sakidin, H. and Sufahani, S.F. and Amin, A.R.M. and Abdullah, M.M. and Quegan, S. (2019) Implementation of land cover change detection based on supervised classifications of multispectral satellite data for leveraging Internet of Things. International Journal of GEOMATE, 17 (59). pp. 1863-1870.

Ahmad, S. and Anwar, A. and Mohammed, B.S. and Wahab, M.B.A. and Ahmad, S.A. (2019) Strength behavior of concrete by partial replacement of fine aggregate with ceramic powder. International Journal of Recent Technology and Engineering, 8 (2). pp. 5712-5718.

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Asghar, H.M.A. and Bhattacharjee, S. (2019) Mechanistic investigation of phytochemicals involved in green synthesis of gold nanoparticles using aqueous Elaeis guineensis leaves extract: Role of phenolic compounds and flavonoids. Biotechnology and Applied Biochemistry, 66 (4). pp. 698-708.

Abd Rahim, N.S. and Saaid, I.M. and Umar, A.A. (2019) Evaluation of foam performance at different temperature for enhanced oil recovery process. World Journal of Engineering, 16 (3). pp. 412-418.

Ariffin, M.M. and Halim, F.A.A. and Arshad, N.I. and Mehat, M. and Hashim, A.S. (2019) Calculic kidsÂ© mobile app: The impact on educational effectiveness of dyscalculia children. International Journal of Innovative Technology and Exploring Engineering, 8 (8). pp. 701-705.

Anjum, H. and Johari, K. and Gnanasundaram, N. and Appusamy, A. and Thanabalan, M. (2019) Investigation of green functionalization of multiwall carbon nanotubes and its application in adsorption of benzene, toluene & p-xylene from aqueous solution. Journal of Cleaner Production, 221. pp. 323-338.

Ali, A.M. and Padmanabhan, E. and Mijinyawa, A. and Kwaya, M.Y. (2019) Effect of pH on the stability of quartz in a multi-phase system of kaolinite, hydrous Al (hydr)oxide and quartz. SN Applied Sciences, 1 (5).

Ahmad, A. and Hashim, U.K.M. and Abd Wahid, R. and Sakidin, H. and Sufahani, S.F. and Amin, A.R.M. and Abdullah, M.M. and Quegan, S. (2019) Implementation of land cover change detection based on supervised classifications of multispectral satellite data for leveraging internet of things. ARPN Journal of Engineering and Applied Sciences, 14 (10). pp. 1863-1870.

Adamu, M. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2019) Evaluating the impact resistance of roller compacted concrete containing crumb rubber and nanosilica using response surface methodology and Weibull distribution. World Journal of Engineering, 16 (1). pp. 33-43.

Al-Waked, R.F. and Nasif, M.S. (2019) Air to air energy recovery from HVAC systems under different membrane materials. Universal Journal of Mechanical Engineering, 7 (2). pp. 37-49.

Akhter, J. and Gilani, S.I. and Al-kayiem, H.H. and Ali, M. and Masood, F. (2019) Characterization and stability analysis of oil-based copper oxide nanofluids for medium temperature solar collectors Charakterisierung und StabilitÃ¤tsanalyse von Ã¶lbasierten Kupferoxid-Nanofluiden fÃ¼r Mitteltemperatursonnenkollektoren. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 311-319.

Ali, M. and Ahmad, F. and Melor, P.S. and Yasir, M. and Yahya, N. and Aslam, M. and Malik, M.R.R. (2019) Influence of powder loading on densification and microstructure of injection molded Fe-50Ni soft magnetic alloys Einfluss der Pulverbeladung auf die Verdichtung und das GefÃ¼ge spritzgegossener weichmagnetischer Fe-50Ni-Legierungen. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 274-282.

Ahsan, S. and Lemma, T.A. and Muhammad, M. (2019) Prognosis of gas turbine remaining useful life using particle filter approach Prognose der verbleibenden Nutzungsdauer einer Gasturbine mittels Partikelfilter-Verfahren. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 336-345.

Asadpour, R. and Sapari, N.B. and Hasnain Isa, M. and Kakooei, S. (2019) Further study of adsorption of crude oils onto acetylated corn silk and its kinetics and equilibrium isotherm. International Journal of Engineering, Transactions B: Applications, 32 (2). pp. 284-291.

Ali, Y. and Padmanabhan, E. (2019) Prediction of lamination patterns in Heterolithic sedimentary sequence, offshore Sarawak (Malaysia). Advances in Science, Technology and Innovation. pp. 203-205.

Abdul Karim, S.A. and Saaban, A. and Skala, V. (2019) Range-Restricted Surface Interpolation Using Rational Bi-Cubic Spline Functions with 12 Parameters. IEEE Access, 7. pp. 104992-105007.

Afrooz, I.E. and Chuan Ching, D.L. (2019) Effect of novel swirl distributor plate on hydrodynamics of fluidized bed gasifier. International Journal of Engineering, Transactions A: Basics, 32 (10). pp. 1358-1365.

Ahmed Ali, M.O. and Ja'e, I.A. and Zhen Hwa, M.G. (2019) Effects of water depth, mooring line diameter and hydrodynamic coefficients on the behaviour of deepwater FPSOs. Ain Shams Engineering Journal.

Al-Bared, M.A.M. and Harahap, I.S.H. and Marto, A. and Mustaffa, Z. and Ali, M.O.A. and Alsubal, S. (2019) Stability of cut slope and degradation of rock slope forming materials â�� A review. Malaysian Construction Research Journal, 6 (Specia). pp. 215-228.

Akhter, J. and Gilani, S.I. and Al-Kayiem, H.H. and Ali, M. (2019) Optical performance analysis of single flow through and concentric tube receiver coupled with a modified CPC collector under different configurations. Energies, 12 (21).

Achim, N. and Husin, H. and Hassan, Z. (2019) Blending poly (3-hydroxybutyrate) with polyethylene glycol (PEG): Thermal behaviour and rheological study. Journal of Mechanical Engineering and Sciences, 13 (3). pp. 5294-5305.

Abdul Karim, Z.A. and Afiq Sidqi, M. and Majid, M.A.A. and Muhammad, M. and Aoki, H. and Xiaoming, Z. (2019) Exergy and regression analysis for optimization of electric chillers at a gas district cooling plant. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.3 S1). pp. 98-102.

Al-Bared, M.A.M. and Harahap, I.S.H. and Marto, A. and Nezhad Khalil Abad, S.V.A. and Mustaffa, Z. and Ali, M.O.A. (2019) Mechanical behaviour of waste powdered tilesand portland cement treated soft clay. Geomechanics and Engineering, 19 (1). pp. 37-47.

Al-Kayiem, H.H. (2019) Solar thermal: Technical challenges and solutions for power generation. Journal of Mechanical Engineering Research and Developments, 42 (4). pp. 269-271.

Aldlemy, M.S. and Rasani, M.R. and Tuan, T.M.Y.S. and Ariffin, A.K. (2019) Dynamic adaptive mesh refinement of fluid-structure interaction using immersed boundary method with two-stage corrections. Scientia Iranica, 26 (5 B). pp. 2872-2883.

Ahmad, M. and Binti Zaki, N.A. (2019) Role of Co2 injection on enhance methane ecovery - a case study from Turkish Coal Seam, Amasra Coal Field Turkey. ARPN Journal of Engineering and Applied Sciences, 14 (17). pp. 3022-3031.

Ani, M.N.C. and Kamaruddin, S. and Azid, I.A. (2019) Leanness production system through improving of upstream process based on check-act-plan-do cycle. International Journal of Six Sigma and Competitive Advantage, 11 (2-3). pp. 95-113.

Ani, M.N.C. and Kamaruddin, S. and Azid, I.A. (2019) Factory-in-factory concept as a new business model for automotive production system. International Journal of Six Sigma and Competitive Advantage, 11 (2-3). pp. 157-178.

Anwar, R. and Rehman, M. and Wang, K.S. and Hashmani, M.A. and Shamim, A. (2019) Investigation of Knowledge Sharing Behavior in Global Software Development Organizations Using Social Cognitive Theory. IEEE Access, 7. pp. 71286-71298.

Almahbashi, N.M.Y. and Kutty, S.R.M. and Chua, Y.C. and Sholagberu, A.T. and Ghaleb, A.A.S. and Aminu, N. (2019) Kinetics of nutrient removal in an integrated suspended growth reactor. International Journal of Integrated Engineering, 11 (2). pp. 178-185.

Abbas, M.K. and Jung, L.T. and Mahmood, A.K. and Abdulla, R. (2019) Intelligent Software Agents for Managing Road Speed Offences. Advances in Intelligent Systems and Computing, 984. pp. 180-191.

Abdullah, R.N. and Yaacob, R.A.I.R. and Hashim, A.J.C.M. and Hussain, I.A. and Roslan, A. (2019) Intensifying experiential learning with dynamic learning styles in traditional classroom for technical and vocational students. Journal of Technical Education and Training, 11 (4). pp. 1-10.

Ahmad, M. and Eei, O.K. and Zamir, A. and Din, Z.U. (2019) VARIOUS TECHNIQUES TO EVALUATE CARBONACEOUS SOURCE ROCKS AS AN UNCONVENTIONAL GAS RESERVOIR. ARPN Journal of Engineering and Applied Sciences, 14 (23). pp. 3975-3983.

Abbasi, A. and Nasef, M.M. and Babadi, F.E. and Faridi-Majidi, R. and Takeshi, M. and Abouzari-Lotf, E. and Choong, T. and Somwangthanaroj, A. and Kheawhom, S. (2019) Carbon Dioxide Adsorption on Grafted Nanofibrous Adsorbents Functionalized Using Different Amines. Frontiers in Energy Research, 7.

Ali, Y. and Padmanabhan, E. (2019) Prediction of lamination patterns in Heterolithic sedimentary sequence, offshore Sarawak (Malaysia). Advances in Science, Technology and Innovation. pp. 203-205.

Abdul Karim, S.A. and Saaban, A. and Skala, V. (2019) Range-Restricted Surface Interpolation Using Rational Bi-Cubic Spline Functions with 12 Parameters. IEEE Access, 7. pp. 104992-105007.

Abdul-Talib, A.-N. and Alanazi, T.A. and Ashari, H. (2019) Examining new product development speed and team work quality relationship: Evidence from telecom industry. International Journal of Supply Chain Management, 8 (5). pp. 1120-1130.

Amin, M. and Ghazali, Z. and Gulzar, A. (2019) Role of corporate branding, customer involvement and customer relationship proneness in luxury fashion branding Peranan Penjenamaan Korporat, Hubungan Pelanggan, dan Penglibatan Pelanggan dalam Barang Berjenama Mahal. Jurnal Pengurusan, 57.

Al-Homery, H.A. and Ashari, H. and Ahmad, A. (2019) Enhancing customer and supplier relationship through the iterative customer relationship management process. International Journal of Supply Chain Management, 8 (6). pp. 967-977.

Ahmad, Tausif and Bustam, Mohamad Azmi and Irfan, Muhammad and Moniruzzaman, Muhammad and Asghar, Hafiz Muhammad Anwaar and Bhattacharjee, Sekhar (2019) Mechanistic investigation of phytochemicals involved in green synthesis of gold nanoparticles using aqueous Elaeis guineensis leaves extract: Role of phenolic compounds and flavonoids. Biotechnology and applied biochemistry, 66 (4). pp. 698-708.

Ahmad, Tausif and Bustam, Mohamad Azmi and Irfan, Muhammad and Moniruzzaman, Muhammad and Samsudin, Mohamad Fakhrul Ridhwan and Asghar, Hafiz Muhammad Anwaar and Muhammad, Nawshad and Iqbal, Jibran and Bhattacharjee, Sekhar (2019) Effect of gold and iron nanoparticles on photocatalytic behaviour of titanium dioxide towards 1-butyl-3-methylimidazolium chloride ionic liquid. Journal of Molecular Liquids, 291. p. 111277.

Ali, Md Korban and Moshikur, Rahman Md and Wakabayashi, Rie and Tahara, Yoshiro and Moniruzzaman, Muhammad and Kamiya, Noriho and Goto, Masahiro (2019) Synthesis and characterization of choline—fatty-acid-based ionic liquids: A new biocompatible surfactant. Journal of colloid and interface science, 551. pp. 72-80.

Al-Shargie, Fares (2019) Stress Detection and Reduction Based on Simultaneous Measurement of EEG and fNIRS Signals.

B

Babar, Muhammad and Bustam, Mohamad Azmi and Ali, Abulhassan and Maulud, Abdulhalim Shah and Shafiq, Umar and Shariff, Azmi M and Man, Zakaria (2019) Efficient CO2 capture using NH2--MIL--101/CA composite cryogenic packed bed column. Cryogenics, 101. pp. 79-88.

Babar, Muhammad and Bustam, Mohamad Azmi and Ali, Abulhassan and Maulud, Abdulhalim Shah and Shafiq, Umar and Mukhtar, Ahmad and Shah, Syed Nasir and Maqsood, Khuram and Mellon, Nurhayati and Shariff, Azmi M (2019) Thermodynamic data for cryogenic carbon dioxide capture from natural gas: A review. Cryogenics, 102. pp. 85-104.

Belhaj, Ahmed Fatih and Elraies, Khaled Abdalla and Janjuhah, Hammad Tariq and Tasfy, Sara Faiz Hanna and Yahya, Noorhana and Abdullah, Bawadi and Umar, Abubakar Abubakar and Ghanem, Ouahid Ben and Alnarabiji, Mohamad Sahban (2019) Electromagnetic waves-induced hydrophobic multiwalled carbon nanotubes for enhanced oil recovery. Journal of Petroleum Exploration and Production Technology, 9. pp. 2667-2670.

Babar, M and Bustam, MA and Maulud, AS and Ali, AH (2019) Optimization of cryogenic carbon dioxide capture from natural gas. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 248-253.

Bavoh, Cornelius B and Yuha, Yasmine Binti Md and Tay, WH and Ofei, Titus Ntow and Lal, Bhajan and Mukhtar, Hilmi (2019) Experimental and modelling of the impact of quaternary ammonium salts/ionic liquid on the rheological and hydrate inhibition properties of xanthan gum water-based muds for drilling gas hydrate-bearing rocks. Journal of Petroleum Science and Engineering, 183. p. 106468.

Bavoh, C.B. and Lal, B. and Ben-Awuah, J. and Khan, M.S. and Ofori-Sarpong, G. (2019) Kinetics of Mixed Amino Acid and Ionic Liquid on CO2 Hydrate Formation. IOP Conference Series: Materials Science and Engineering, 495 (1).

Benmessaoud, M.T. and Boudghene Stambouli, A. and Vasant, P. and Flazi, S. and Koinuma, H. and Tioursi, M. (2019) New Smart Power Management Hybrid System Photovoltaic-Fuel Cell. Advances in Intelligent Systems and Computing, 866. pp. 476-486.

Bavoh, Cornelius B and Lal, Bhajan and Osei, Harrison and Sabil, Khalik M and Mukhtar, Hilmi (2019) A review on the role of amino acids in gas hydrate inhibition, CO2 capture and sequestration, and natural gas storage. Journal of Natural Gas Science and Engineering, 64. pp. 52-71.

Bashiri, Robabeh and Mohamed, Norani Muti and Kait, Chong Fai and Sufian, Suriati (2019) Optimization of hydrogen production over TiO 2 supported copper and nickel oxides: Effect of photoelectrochemical features. Journal of Applied Electrochemistry, 49. pp. 27-38.

Bashiri, Robabeh and Mohamed, Norani Muti and Ling, Liew Yi and Suhaimi, Nur Amirah and Shahid, Muhammad Umair and Sufian, Suriati and Kait, Chong Fai and Saheed, Shuaib Mohamed (2019) Influence of seeding layer on photoelectrochemical hydrogen production over TiO2 nanorod decorated with reduced graphene oxide. Diamond and Related Materials, 94. pp. 194-202.

Baheta, A.T. and Leong, K.P. and Sulaiman, S.A. and Fentaye, A.D. (2019) CFD analysis of fouling effects on aerodynamics performance of turbine blades. SpringerBriefs in Applied Sciences and Technology. pp. 73-84.

Basri, S. and Dominic, D.D. and Murugan, T. and Almomani, M.A. (2019) A proposed framework using exploratory testing to improve software quality in SMEâ��s. Advances in Intelligent Systems and Computing, 843. pp. 1113-1122.

Barman, J. and Gogoi, S.B. and Viswanathan, J. and Konwar, D. (2019) Formulation of Chemical Slug for EOR Application of Moran Oil Field of Upper Assam Basin, India. Sustainable Civil Infrastructures. pp. 137-150.

Barman, J. and Gogoi, S.B. and Viswanathan, J. and Konwar, D. and Jagatheesan, K. (2019) Laboratory Characterization of Reservoir Rock and Fluids of Upper Assam Basin, India. Sustainable Civil Infrastructures. pp. 179-197.

Baharom, M.B. and Zahir, M.A. (2019) Machinery for mechanical engineers. SpringerBriefs in Applied Sciences and Technology. pp. 23-42.

Basri, S. and Murugan, T. and Dominic, D.D. (2019) Validating the Conceptual Framework with Exploratory Testing. Advances in Intelligent Systems and Computing, 984. pp. 305-317.

Bavoh, C.B. and Lal, B. and Osei, H. and Sabil, K.M. and Mukhtar, H. (2019) A review on the role of amino acids in gas hydrate inhibition, CO 2 capture and sequestration, and natural gas storage. Journal of Natural Gas Science and Engineering, 64. pp. 52-71.

Berahim, N. and Amiri, I.S. and Anwar, T. and Azzuhri, S.R. and Mohd Nasir, M.N.S. and Zakaria, R. and Chong, W.Y. and Lai, C.K. and Lee, S.H. and Ahmad, H. and Ismail, M.A. and Yupapin, P. (2019) Polarizing effect of MoSe2-coated optical waveguides. Results in Physics, 12. pp. 7-11.

Basri, A.Q. and Mohamed, N.M.Z.N. and Yasir, K.A.S.H.M. and Fazi, H.M. and Fudzin, A.F. (2019) The validation of productivity on the changeover activity at the automotive stamping press line by comparing the embedded SMED frame-work versus SMED approach: A witness simulation case study. IOP Conference Series: Materials Science and Engineering, 469 (1).

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. (2019) Optimization of hydrogen production over TiO2 supported copper and nickel oxides: effect of photoelectrochemical features. Journal of Applied Electrochemistry, 49 (1). pp. 27-38.

Bahrudin, M.N.H.M. and Mukhtar, A.N. and Hagos, F.Y. and Mamat, R. and Abdullah, A.A. and Karim, Z.A.A. (2019) Comparison between tri-fuel (diesel-ethanol-biodiesel) emulsion with and without surfactant. AIP Conference Proceedings, 2059.

Babasafari, A.A. and Ghosh, D.P. and Salim, A.M.A. and Ratnam, T. and Sambo, C. and Rezaee, S. (2019) Petro Elastic Modeling for enhancement of hydrocarbon prediction: Case study in SE Asia. 2018 SEG International Exposition and Annual Meeting, SEG 2018. pp. 3141-3145.

Baharom, M.B. and Zahir, M.A. (2019) Machinery for mechanical engineers. SpringerBriefs in Applied Sciences and Technology. pp. 23-42.

Baig, M.K. and Soleimani, H. and Yahya, N. and Sabet, M. (2019) Magnetic Behavior of Ni/NiO Coreâ��Shell Nanoparticles under Electromagnetic Waves for Oilâ��Water Interfacial Tension Reduction. Journal of Materials Engineering and Performance, 28 (9). pp. 5882-5889.

Balogun, A.O. and Basri, S. and Abdulkadir, S.J. and Hashim, A.S. (2019) Performance analysis of feature selection methods in software defect prediction: A search method approach. Applied Sciences (Switzerland), 9 (13).

Babiker, A. and Faye, I. and Mumtaz, W. and Malik, A.S. and Sato, H. (2019) EEG in classroom: EMD features to detect situational interest of students during learning. Multimedia Tools and Applications, 78 (12). pp. 16261-16281.

Balasbaneh, A.T. and Bin Marsono, A.K. and Gohari, A. (2019) Sustainable materials selection based on flood damage assessment for a building using LCA and LCC. Journal of Cleaner Production, 222. pp. 844-855.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassam, S.M. and Harindran, V.R. (2019) Frequency Response Based Curve Fitting Approximation of Fractional-Order PID Controllers. International Journal of Applied Mathematics and Computer Science, 29 (2). pp. 311-326.

Baheta, A.T. and Looi, K.K. and Oumer, A.N. and Habib, K. (2019) Thermoelectric Air-Conditioning System: Building Applications and Enhancement Techniques. International Journal of Air-Conditioning and Refrigeration, 27 (2).

Bashiri, R. and Mohamed, N.M. and Ling, L.Y. and Suhaimi, N.A. and Shahid, M.U. and Sufian, S. and Kait, C.F. and Saheed, S.M. (2019) Influence of seeding layer on photoelectrochemical hydrogen production over TiO 2 nanorod decorated with reduced graphene oxide. Diamond and Related Materials, 94. pp. 194-202.

Babar, M. and Bustam, M.A. and Maulud, A.S. and Ali, A.H. (2019) Optimization of cryogenic carbon dioxide capture from natural gas Optimierung der kryogenen Kohlendioxidabscheidung aus Erdgas. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 248-253.

Balandong, R.P. and Tang, T.B. and Short, M.A. and Saad, N.M. (2019) Maritime shift workers sleepiness detection system with multi-modality cues. IEEE Access, 7. pp. 98792-98802.

Bong, D.C.H. and Jeoti, V. and Cheab, S. and Wong, P.W. (2019) Design and Synthesis of Chained-Response Multiband Filters. IEEE Access, 7. pp. 130922-130936.

Balogun, A.O. and Basri, S. and Abdulkadir, S.J. and Adeyemo, V.E. and Imam, A.A. and Bajeh, A.O. (2019) Software defect prediction: Analysis of class imbalance and performance stability. Journal of Engineering Science and Technology, 14 (6). pp. 3294-3308.

Belhaj, A.F. and Elraies, K.A. and Alnarabiji, M.S. and Shuhli, J.A.B.M. and Mahmood, S.M. and Ern, L.W. (2019) Experimental investigation of surfactant partitioning in Pre-CMC and Post-CMC regimes for enhanced oil recovery application. Energies, 12 (12).

Basri, S. and Murugan, T. and Dominic, D.D. (2019) Validating the Conceptual Framework with Exploratory Testing. Advances in Intelligent Systems and Computing, 984. pp. 305-317.

Baderi, M. and Ahmad, W.F.W. and Abdullah, M.R.T.L. (2019) Review on preliminary study on studentâ��s motivation in learning history. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 11870 . pp. 513-522.

Babasafari, A.A. and Ghosh, D.P. and Salim, A.M.A. and Kazemeini, S.H. and Ratnam, T. (2019) Blueing reflectivity integration (BRI) for seismic spectral enhancement and its application in seismic data interpretation. Petroleum and Coal, 61 (6). pp. 1395-1402.

Balakrishnan, V. and Govindan, V. and Arshad, N.I. and Shuib, L. and Cachia, E. (2019) Facebook User Reactions And Emotion: An Analysis Of Their Relationships Among The Online Diabetes Community. Malaysian Journal of Computer Science, 2019 (Specia). pp. 87-97.

Balandong, R.P. and Tang, T.B. and Short, M.A. and Saad, N.M. (2019) Maritime shift workers sleepiness detection system with multi-modality cues. IEEE Access, 7. pp. 98792-98802.

Bavoh, Cornelius B and Ofei, Titus Ntow and Lal, Bhajan and Sharif, Azmi M and Shahpin, M Hazri BA and Sundramoorthy, Jega D (2019) Assessing the impact of an ionic liquid on NaCl/KCl/polymer water-based mud (WBM) for drilling gas hydrate-bearing sediments. Journal of Molecular Liquids, 294. p. 111643.

Balandong, Rodney P and Tang, Tong Boon and Short, Michelle A and Saad, Naufal M (2019) Maritime shift workers sleepiness detection system with multi-modality cues. IEEE Access, 7. pp. 98792-98802.

C

Chia, S.R. and Chew, K.W. and Zaid, H.F.M. and Chu, D.-T. and Tao, Y. and Show, P.L. (2019) Microalgal Protein Extraction From Chlorella vulgaris FSP-E Using Triphasic Partitioning Technique With Sonication. Frontiers in Bioengineering and Biotechnology, 7. (Submitted)

Chiroma, H. and Abdullahi, U.A. and Hashem, I.A.T. and Saadi, Y. and Al-Dabbagh, R.D. and Ahmad, M.M. and Dada, G.E. and Danjuma, S. and Maitama, J.Z. and Abubakar, A. and Abdulhamid, S.â��M. (2019) A Theoretical Framework for Big Data Analytics Based on Computational Intelligent Algorithms with the Potential to Reduce Energy Consumption. Green Energy and Technology. pp. 1-20.

Charles, A. and Khan, M.R. and Ng, K.H. and Wu, T.Y. and Lim, J.W. and Wongsakulphasatch, S. and Witoon, T. and Cheng, C.K. (2019) Facile synthesis of CaFe 2 O 4 for visible light driven treatment of polluting palm oil mill effluent: Photokinetic and scavenging study. Science of the Total Environment, 661. pp. 522-530.

Chew, T.L. and Yeong, Y.F. and Ho, C.D. and Ahmad, A.L. (2019) Ion-Exchanged Silicoaluminophosphate-34 Membrane for Efficient CO2/N2 Separation with Low CO2 Concentration in the Gas Mixture. Industrial and Engineering Chemistry Research, 58 (2). pp. 729-735.

Cheng, S.W.Y. and Kurnia, J.C. and Ghoreishi-Madiseh, S.A. and Sasmito, A.P. (2019) Optimization of geothermal energy extraction from abandoned oil well with a novel well bottom curvature design utilizing Taguchi method. Energy, 188.

Chai, M.T. and Amin, H.U. and Izhar, L.I. and Saad, M.N.M. and Abdul Rahman, M. and Malik, A.S. and Tang, T.B. (2019) Exploring EEG Effective Connectivity Network in Estimating Influence of Color on Emotion and Memory. Frontiers in Neuroinformatics, 13.

Cossa, K.N. (2019) Basic concepts on rheology and application of shear-thickening fluids in protective gear. SN Applied Sciences, 1 (10).

Chong, W.W.F. and Hamdan, S.H. and Wong, K.J. and Yusup, S. (2019) Modelling transitions in regimes of lubrication for rough surface contact. Lubricants, 7 (9).

Chong, A.S. and Manan, M.A. and Idris, A.K. (2019) Influence of lignosulfonate types and electrolyte concentrations on the adsorption of lignosulfonate onto clay. International Journal of Recent Technology and Engineering, 8 (2). pp. 72-80.

Chan, Y.H. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2019) Liquefaction of palm kernel shell to bio-oil using sub- and supercritical water: An overall kinetic study. Journal of the Energy Institute, 92 (3). pp. 535-541.

Chandran, D. and Khalid, M. and Raviadaran, R. and Lau, H.L.N. and Liang Yung, C. and Kanesan, D. and Salim, M. (2019) Sustainability of water in diesel emulsion fuel: An assessment of its corrosion behaviour towards copper. Journal of Cleaner Production, 220. pp. 1005-1013.

Chew, T.L. and Yeong, Y.F. and Ho, C.D. and Ahmad, A.L. (2019) Ion-Exchanged Silicoaluminophosphate-34 Membrane for Efficient CO 2 /N 2 Separation with Low CO 2 Concentration in the Gas Mixture. Industrial and Engineering Chemistry Research, 58 (2). pp. 729-735.

Cheh Lin, I.K. and Jamaluddin, M.H. and Awang, A. and Selvaraju, R. and Dahri, M.H. and Yen, L.C. and Rahim, H.A. (2019) A triple band hybrid MIMO rectangular dielectric resonator antenna for LTE applications. IEEE Access, 7. pp. 122900-122913.

Chuan, L.K. and Guan, B.H. and Yusuf, Y. and Zainuddin, A.A. and Auni, N. (2019) Interfacial tension and contact angle alteration of nanofluids by using lanthanum substituted manganese-zinc ferrite nanoparticles. Digest Journal of Nanomaterials and Biostructures, 14 (1). pp. 1-5.

Chian, O.W. and Bin Zakariah, M.N.A. and Bin Md Rafek, A.G. and Mohamed, M.A. (2019) DELINEATION OF SUBSURFACE STRUCTURES OF SEMANGGOL FORMATION, NORTH PERAK USING MAGNETIC DATA. International Journal of GEOMATE, 17 (59). pp. 204-209.

Chong, S.L. (2019) A practical application of analytic guiding frame (AGF) and overall guiding frame (OGF): An illustration from literacy education. Qualitative Report, 24 (11). pp. 2747-2758.

Chowdhury, Md Raihan and Moshikur, Rahman Md and Wakabayashi, Rie and Tahara, Yoshiro and Kamiya, Noriho and Moniruzzaman, Muhammad and Goto, Masahiro (2019) In vivo biocompatibility, pharmacokinetics, antitumor efficacy, and hypersensitivity evaluation of ionic liquid-mediated paclitaxel formulations. International Journal of Pharmaceutics, 565. pp. 219-226.

Chowdhury, Md Raihan and Moshikur, Rahman Md and Wakabayashi, Rie and Tahara, Yoshiro and Kamiya, Noriho and Moniruzzaman, Muhammad and Goto, Masahiro (2019) Development of a novel ionic liquid—curcumin complex to enhance its solubility, stability, and activity. Chemical Communications, 55 (54). pp. 7737-7740.

Chai, Meei Tyng and Amin, Hafeez Ullah and Izhar, Lila Iznita and Saad, Mohamad Naufal Mohamad and Abdul Rahman, Mohammad and Malik, Aamir Saeed and Tang, Tong Boon (2019) Exploring EEG effective connectivity network in estimating influence of color on emotion and memory. Frontiers in neuroinformatics, 13. p. 66.

D

Daud, S.M. and Wan Daud, W.R. and Abu Bakar, M.H. and Kim, B.H. and Somalu, M.R. and Jahim, J.M. and Muchtar, A. and Ghasemi, M. (2019) A comparison of long-term fouling performance by zirconia ceramic filter and cation exchange in microbial fuel cells. International Biodeterioration and Biodegradation, 136. pp. 63-70.

Din, I.U. and Shaharun, M.S. and Naeem, A. and Tasleem, S. and Ahmad, P. (2019) Revalorization of CO 2 for methanol production via ZnO promoted carbon nanofibers based Cu-ZrO 2 catalytic hydrogenation. Journal of Energy Chemistry, 39. pp. 68-76.

Djuraev, U. and Jufar, S.R. and Mahardika, H. and Ooi, P.C. (2019) Corrigendum to â��Numerical simulation of seismoelectric effect for monitoring foam propagation through a reservoirâ�� J. Petrol. Sci. Eng. 171 (2018) 618â��635(S0920410518306442)(10.1016/j.petrol.2018.07.069). Journal of Petroleum Science and Engineering, 174. p. 1339.

Dong, H.J. and Abdulla, R. and Selvaperumal, S.K. and Duraikannan, S. and Lakshmanan, R. and Abbas, M.K. (2019) Interactive on smart classroom system using beacon technology. International Journal of Electrical and Computer Engineering, 9 (5). pp. 4250-4257.

Deshannavar, U.B. and Ramasamy, M. (2019) A model to determine maximum heat flux under forced convective heat transfer regime for crude oil fouling studies. Applied Thermal Engineering, 156. pp. 485-493.

Ding, Sie Hao and Ng, Tiffany Yit Siew and Chew, Thiam Leng and Oh, Pei Ching and Ahmad, Abdul Latif and Ho, Chii-Dong (2019) Evaluation of the properties, gas permeability, and selectivity of mixed matrix membrane based on polysulfone polymer matrix incorporated with KIT-6 silica. Polymers, 11 (11). p. 1732.

E

El-Adawy, Mohammed and Heikal, MR and A. Aziz, A Rashid (2019) Stereoscopic particle image velocimetry measurements and proper orthogonal decomposition analysis of the in-cylinder flow of gasoline direct injection engine. Journal of Energy Resources Technology, 141 (4). 042204.

El Adawy, Mohammed and Heikal, MR and A Aziz, A Rashid (2019) Experimental investigation of the in-cylinder tumble motion inside GDI cylinder at different planes under steady-state condition using stereoscopic-PIV. Journal of Applied Fluid Mechanics, 12 (1). pp. 41-49.

Emamian, S. and Awang, M. and Yusof, F. and Hussain, P. and Meyghani, B. and Zafar, A. (2019) The Effect of Pin Profiles and Process Parameters on Temperature and Tensile Strength in Friction Stir Welding of AL6061 Alloy. Lecture Notes in Mechanical Engineering. pp. 15-37.

El-Adawy, M. and Heikal, M.R. and Aziz, A.R.A. (2019) Stereoscopic particle image velocimetry measurements and proper orthogonal decomposition analysis of the in-cylinder flow of gasoline direct injection engine. Journal of Energy Resources Technology, Transactions of the ASME, 141 (4).

Emani, S. and Ramasamy, M. and Shaari, K.Z.K. (2019) Discrete phase-CFD simulations of asphaltenes particles deposition from crude oil in shell and tube heat exchangers. Applied Thermal Engineering. pp. 105-118.

Ezechi, E.H. and Kutty, S.R.M. and Muda, K. and Yaqub, A. (2019) A comparative evaluation of an integrated hybrid bioreactor treating industrial wastewater. Journal of Water Process Engineering, 31.

Elgharbawy, Amal AM and Alam, MD Zahangir and Moniruzzaman, Muhammad and Kabbashi, Nassereldeen Ahmad and Jamal, Parveen (2019) High yield of second-generation ethanol in an ionic Liquid-Cellulase integrated system for single-step processing of empty fruit bunch. Biofuels.

Elgharbawy, Amal AM and Alam, Md Zahangir and Moniruzzaman, Muhammad and Salleh, Hamzah Mohd and others (2019) Hydrolysis Kinetics of Oil Palm Empty Fruit Bunch in Ionic Liquids and Cellulase Integrated System. International Journal of Chemistry, 11 (2). pp. 95-105.

F

Foong, F.M. and Ket, T.C. and Lee, O.B. and Aziz, A.R.A. (2019) Stress and damping of wide cantilever beams under free vibration. Journal of Mechanical Science and Technology, 33 (1). pp. 21-27.

Fauzan, Nur Aqilah Bt and Mannan, Hafiz Abdul and Nasir, Rizwan and Mohshim, Dzeti Farhah Bt and Mukhtar, Hilmi (2019) Various techniques for preparation of thin-film composite mixed-matrix membranes for CO2 separation. Chemical Engineering & Technology, 42 (12). pp. 2608-2620.

Foong, O.-M. and Sulaiman, S. and Khairuddin, A.A. (2019) Atrial Fibrillation for Stroke Detection. Advances in Intelligent Systems and Computing, 1047. pp. 136-143.

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Ovinis, M. (2019) Effects of carbon fiber hybridization on the compressive strength of glass-carbon/epoxy hybrid composite pipes before and after low velocity impact. Key Engineering Materials, 796. pp. 30-37.

Foroozesh, J. and Abdalla, A.I.M. and Zhang, Z. (2019) Pore Network Modeling of Shale Gas Reservoirs: Gas Desorption and Slip Flow Effects. Transport in Porous Media, 126 (3). pp. 633-653.

Fudzin, A.F. and Mokhtar, A.A. and Amin, M. and Basri, A.Q. (2019) Analytical hierarchy process application of body in white modular sub-assembly for automotive manufacturing in Malaysia - A case study. IOP Conference Series: Materials Science and Engineering, 469 (1).

Farooq, M. and Ramli, A. and Naeem, A. and Shah, L.A. and Mahmood, T. and Tariq, M. and Khan, J. and Perveen, F. and Humayun, M. (2019) Photo-catalytic degradation of Acid Yellow 17 azo dye using ZrO2-CeO2 hollow microspheres as a catalyst. Desalination and Water Treatment, 170. pp. 318-324.

Fauzan, N.A.B. and Mannan, H.A. and Nasir, R. and Mohshim, D.F.B. and Mukhtar, H. (2019) Various Techniques for Preparation of Thin-Film Composite Mixed-Matrix Membranes for CO2 Separation. Chemical Engineering and Technology, 42 (12). pp. 2608-2620.

Farouk, F.N.B.M. and Anwar, T. and Zakaria, N.B. (2019) Hybrid bayesian network in neural network based deep learning framework for detection of obstructive sleep apnea syndrome. International Journal of Engineering and Advanced Technology, 9 (1). pp. 4922-4926.

Fong, M. and Alzoubi, M.A. and Kurnia, J.C. and Sasmito, A.P. (2019) On the performance of ground coupled seasonal thermal energy storage for heating and cooling: A Canadian context. Applied Energy, 250. pp. 593-604.

Fentaye, A.D. and Ul-Haq Gilani, S.I. and Baheta, A.T. and Li, Y.-G. (2019) Performance-based fault diagnosis of a gas turbine engine using an integrated support vector machine and artificial neural network method. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 233 (6). pp. 786-802.

Fentaye, A.D. and Baheta, A.T. and Gilani, S.I. and Kyprianidis, K.G. (2019) A review on gas turbine gas-path diagnostics: State-of-the-art methods, challenges and opportunities. Aerospace, 6 (7).

Fitri, R.A. and Wirakusuma, A. and Fahrina, A. and Roil Bilad, M. and Arahman, N. (2019) Adsorption performance of low-cost Java plum leaves and guava fruits as natural adsorbents for removal of free fatty acids from coconut oil. International Journal of Engineering, Transactions A: Basics, 32 (10). pp. 1372-1378.

Foong, O.-M. and Sulaiman, S. and Khairuddin, A.A. (2019) Atrial Fibrillation for Stroke Detection. Advances in Intelligent Systems and Computing, 1047. pp. 136-143.

Fageeri, S. and Alhussian, H. and Jadid, S. and Abdalla, I.E.E. and Mohamed, A.O.A. and Hussain, A. (2019) Association rules-based cancer data analysis of Khartoum Centre for Radiation and Isotopes. Journal of Computational and Theoretical Nanoscience, 16 (5-6). pp. 2289-2293.

G

Ghaedi, Hosein and Zhao, Ming and Ayoub, Muhammad and Zahraa, Diana and Shariff, Azmi Mohd and Inayat, Abrar (2019) Preparation and characterization of amine (N-methyl diethanolamine)-based transition temperature mixtures (deep eutectic analogues solvents). The Journal of Chemical Thermodynamics, 137. pp. 108-118.

Gbadamosi, A.O. and Junin, R. and Manan, M.A. and Yekeen, N. and Augustine, A. (2019) Hybrid suspension of polymer and nanoparticles for enhanced oil recovery. Polymer Bulletin.

Ganat, T.A. and Hrairi, M. and Maulianda, B. and Motaei, E. (2019) Analytical model for predicting frictional pressure drop in upward vertical two-phase flowing wells. Heat and Mass Transfer/Waerme- und Stoffuebertragung.

Gilani, S.I.-H. (2019) Solar thermal energy trapping mechanisms in practice. SpringerBriefs in Applied Sciences and Technology. pp. 49-62.

Gilal, A.R. and Jaafar, J. and Omar, M. and Basri, S. and Aziz, I.D.A. (2019) A Set of Rules for Constructing Gender-Based Personality Typesâ�� Composition for Software Programmer. Lecture Notes in Electrical Engineering, 520. pp. 363-374.

Gan, H. and Khir, M.H.B.M. and Witjaksono Bin Djaswadi, G. and Ramli, N. (2019) A hybrid model based on constraint OSELM, adaptive weighted SRC and KNN for large-scale indoor localization. IEEE Access, 7. pp. 6971-6989.

Gilani, S.I.-H. (2019) Solar thermal energy trapping mechanisms in practice. SpringerBriefs in Applied Sciences and Technology. pp. 49-62.

Ghazali, Z. and Lim, M.R.T. and A. Jamak, A.B.S. (2019) Maintenance performance improvement analysis using Fuzzy Delphi method: A case of an international lube blending plant in Malaysia. Journal of Quality in Maintenance Engineering.

Gilani, S.I.-H. (2019) Solar thermal energy trapping mechanisms in practice. SpringerBriefs in Applied Sciences and Technology. pp. 49-62.

Gupta, I. and Singh, N. and Singh, A.K. (2019) Layer-based privacy and security architecture for cloud data sharing. Journal of Communications Software and Systems, 15 (2). pp. 173-185.

Ge, I.T.K. and Nugraha, M.W. and Ahmad Kamal, N. and Sambudi, N.S. (2019) Composite of kaolin/sodium alginate (SA) beads for methylene blue adsorption. ASEAN Journal of Chemical Engineering, 19 (2). pp. 100-109.

H

Hassan, Muzamil A and Miyao, Toshihiro and Komiyama, Masaharu (2019) Catalytic oxidative coupling of methane in supercritical water: Investigations on a catalytically active species. The Journal of Supercritical Fluids, 144. pp. 8-13.

Harun, N. and Abidin, S.Z. and Osazuwa, O.U. and Taufiq-Yap, Y.H. and Azizan, M.T. (2019) Hydrogen production from glycerol dry reforming over Ag-promoted Ni/Al 2 O 3. International Journal of Hydrogen Energy. pp. 213-225.

Ho, C.-D. and Chen, L. and Tsai, F.-C. and Lin, G.-H. and Lim, J.-W. (2019) Distillate flux enhancement of the concentric circular direct contact membrane distillation module with spiral wired flow channel. Journal of the Taiwan Institute of Chemical Engineers, 94. pp. 70-80.

Hagos, Ftwi Yohaness and Aziz, A Rashid A and Sulaiman, Shaharin A and Mamat, Rizalman (2019) Engine speed and air-fuel ratio effect on the combustion of methane augmented hydrogen rich syngas in DI SI engine. International Journal of Hydrogen Energy, 44 (1). pp. 477-486.

Hussain, Maham and Tuf, Lemma Dendena and Yusup, Suzana and Zabiri, Haslinda (2019) Characterization of coal bottom ash &its potential to be used as catalyst in biomass gasification. Materials Today: Proceedings, 16. pp. 1886-1893.

Hussain, Maham and Tufa, Lemma Dendena and Yusup, Suzana and Zabiri, Haslinda (2019) Thermochemical behavior and characterization of palm kernel shell via TGA/DTG technique. Materials Today: Proceedings, 16. pp. 1901-1908.

Hussain, Z. and Khan, A. and Sultan, N. and Ali, M. and Naz, M.Y. and Saed, K. and Sulaiman, S.A. (2019) Thermo-chemical conversion of waste glass into non-vitreous porous material for adsorption application. Journal of Material Cycles and Waste Management.

Hashmi, M.B. and Lemma, T.A. and Karim, Z.A.A. (2019) Investigation of the combined effect of variable inlet guide vane drift, fouling, and inlet air cooling on gas turbine performance. Entropy, 21 (12).

Harim, A. and Karim, S.A.A. and Othman, M. and Saaban, A. (2019) Data interpolation using c2 rational quartic spline. International Journal of Scientific and Technology Research, 8 (12). pp. 42-46.

Hajihassani, M. and Kalatehjari, R. and Marto, A. and Mohamad, H. and Khosrotash, M. (2019) 3D prediction of tunneling-induced ground movements based on a hybrid ANN and empirical methods. Engineering with Computers.

Hasan, M.H. and Aziz, N.A. and Akhir, E.A.P. and Burhan, N.Z.N.M. and Razali, R. (2019) A fuzz logic-based cloud computing providerâ��s evaluation and recommendation model. Advances in Intelligent Systems and Computing, 843. pp. 230-239.

Hamed, Y. and Shafie, A. and Mustaffa, Z. and Rusma, N. (2019) Error-reduction approach for corrosion measurements of pipeline inline inspection tools. Measurement and Control (United Kingdom), 52 (1-2). pp. 28-36.

Hagos, F.Y. and A. Aziz, A.R. and Sulaiman, S.A. and Mamat, R. (2019) Engine speed and air-fuel ratio effect on the combustion of methane augmented hydrogen rich syngas in DI SI engine. International Journal of Hydrogen Energy. pp. 477-486.

Hassan, S. and Ya, H. (2019) Experimental study on electrical power generation from a 1-kW engine using simulated biogas fuel. SpringerBriefs in Applied Sciences and Technology. pp. 93-104.

Hussain, A. and Farrukh, S. and Hussain, A. and Ayoub, M. (2019) Carbon capture from natural gas using multi-walled CNTs based mixed matrix membranes. Environmental Technology (United Kingdom), 40 (7). pp. 843-854.

Hameed, A. and Mukhtar, A. and Shafiq, U. and Qizilbash, M. and Khan, M.S. and Rashid, T. and Bavoh, C.B. and Rehman, W.U. and Guardo, A. (2019) Experimental investigation on synthesis, characterization, stability, thermo-physical properties and rheological behavior of MWCNTs-kapok seed oil based nanofluid. Journal of Molecular Liquids, 277. pp. 812-824.

Hamsan, M.H. and Aziz, S.B. and Shukur, M.F. and Kadir, M.F.Z. (2019) Protonic cell performance employing electrolytes based on plasticized methylcellulose-potato starch-NH4NO3. Ionics, 25 (2). pp. 559-572.

Hassan, M.A. and Miyao, T. and Komiyama, M. (2019) Catalytic oxidative coupling of methane in supercritical water: Investigations on a catalytically active species. Journal of Supercritical Fluids, 144. pp. 8-13.

Hassan, S. and Ya, H. (2019) Experimental study on electrical power generation from a 1-kW engine using simulated biogas fuel. SpringerBriefs in Applied Sciences and Technology. pp. 93-104.

Harim, A. and Karim, S.A.A. and Othman, M. and Saaban, A. (2019) Data interpolation using c2 rational quartic spline. International Journal of Scientific and Technology Research, 8 (12). pp. 42-46.

Hamid, F.A. and Saad, M.N.M. and Haris, N. (2019) Emotional stroop task recognition by band-localize fractal dimension method. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 5663-5667.

Hashim, U.K.M. and Ahmad, A. and Sakidin, H. and Sufahani, S.F. and Amin, A.R.B.M. (2019) Monitoring land cover changes in the tropics using satellite remote sensing data. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 3631-3636.

Hassan, A.M. and Ayoub, M. and Eissa, M. and Musa, T. and Bruining, H. and Farajzadeh, R. (2019) Exergy return on exergy investment analysis of natural-polymer (Guar-Arabic gum)enhanced oil recovery process. Energy, 181. pp. 162-172.

Hassan, S.M. and Bingi, K. and Ibrahim, R. and Chein, L.J. and Supramaniam, T.R. (2019) Implementation of flow control over wirelessHART sensor network using wirelessHART adaptors. Indonesian Journal of Electrical Engineering and Computer Science, 15 (2). pp. 910-919.

Hisham, S. and Ayub Khan, F. and Aljlil, S.A. and Ghasemi, M. (2019) Investigating new techniques for the treatment of oil field produced water and energy production. SN Applied Sciences, 1 (6).

Hussain, A. and Hussein, I. and Mkpojiogu, E.O.C. and Sarlan, A. (2019) The state of user experience design (UXD) practice in Malaysia: An in-situ interview approach. International Journal of Innovative Technology and Exploring Engineering, 8 (8 S). pp. 498-504.

Hussain, A. and Al-Athwari, A. and Nabeel, N. and Barkat, M.M. and Ahmad, R. (2019) Usability evaluation model for oBike mobile application: Novice vs expert users. International Journal of Innovative Technology and Exploring Engineering, 8 (8 S). pp. 515-520.

Hamsan, M.H. and Shukur, M.F. and Aziz, S.B. and Kadir, M.F.Z. (2019) Dextran from Leuconostoc mesenteroides-doped ammonium salt-based green polymer electrolyte. Bulletin of Materials Science, 42 (2).

Hawari, H.F. and Zainal, A.A. and Ahmad, M.R. (2019) Development of real time internet of things (IoT) based air quality monitoring system. Indonesian Journal of Electrical Engineering and Computer Science, 13 (3). pp. 1039-1047.

Husain, K. and Awang, A. and Kamel, N. and AÃ¯ssa, S. (2019) Intersection-based link-adaptive beaconless forwarding in urban vehicular ad-hoc networks. Sensors (Switzerland), 19 (5).

Hafeez, Y. and Ali, S.S.A. and Mumtaz, W. and Moinuddin, M. and Adil, S.H. and Al-Saggaf, U.M. and Yasin, M.A.B.M. and Malik, A.S. (2019) Investigating Neurofeedback Protocols for Stress Mitigation: A Comparative Analysis of Different Stimulus Contents. IEEE Access, 7. pp. 141021-141035.

Hoe, H.K. and Prakash, J. and Kamaruddin, S. and Seng, O.K. (2019) An Integrated Model for Adjustment of Process Parameters to Recover Throughput Shortage in Semiconductor Assembly: A Case Study. Journal of Industrial Engineering and Management, 12 (2). pp. 340-355.

Hassan, N.H. and Arshad, N.I. (2019) Linking agility, information technology flexibility and learning. Journal of Advanced Research in Dynamical and Control Systems, 11 (1 Spec). pp. 1403-1407.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Bingi, K. (2019) Hybrid APSO-spiral dynamic algorithms with application to tuning of filtered PPI controller in a wirelessHART environment. Journal of Intelligent and Fuzzy Systems, 37 (1). pp. 597-610.

Hematpour, H. and Mahmood, S.M. and Nasr, N.H. and Karimi, M. and Bataee, M. (2019) Experimental investigation on the mobility reduction factor of surfactant-alternating-gas foam flooding. Kuwait Journal of Science, 46 (4). pp. 75-82.

Hafyan, R.H. and Prasetyo, W.D. and Bhullar, L. and Putra, Z.A. and Bilad, M.R. and Wirzal, M.D.H. and Nordin, N.A.H.M. (2019) Multi-objective optimization of succinic acid production from empty fruit bunch. ASEAN Journal of Chemical Engineering, 19 (1). pp. 1-11.

I

Iqbal, M.A. and Salim, A.M.A. and Baioumy, H. and Gaafar, G.R. and Wahid, A. (2019) Identification and characterization of low resistivity low contrast zones in a clastic outcrop from Sarawak, Malaysia. Journal of Applied Geophysics, 160. pp. 207-217.

Ibrahim, N.M. and Hassan, M.F. (2019) Literature survey on enhancement of MOM for intelligent cross-platform communications in service oriented architecture. Advances in Intelligent Systems and Computing, 843. pp. 477-487.

Inayat, A. and Ayoub, M. and Abdullah, A.Z. and Ullah, S. and Naqvi, S.R. (2019) Decomposition of N2O at low temperature over Co3O4 prepared by different methods. Environmental Progress and Sustainable Energy.

Imam, A.A. and Basri, S. and Ahmad, R. and GonzÃ¡lez-Aparicio, M.T. (2019) Schema proposition model for NoSQL applications. Advances in Intelligent Systems and Computing, 843. pp. 30-39.

Ismail, A.O.A. and Mahmood, A.K. and Babiker, A.E. and Abdelmaboud, A. (2019) The Influence of Online and Traditional Computer Laboratories on Academic Performance of Students. Advances in Intelligent Systems and Computing, 998. pp. 1030-1046.

Imam, A.A. and Basri, S. and Ahmad, R. and GonzÃ¡lez-Aparicio, M.T. (2019) Schema proposition model for NoSQL applications. Advances in Intelligent Systems and Computing, 843. pp. 30-39.

Inayat, M. and Sulaiman, S.A. and Kurnia, J.C. and Shahbaz, M. (2019) Effect of various blended fuels on syngas quality and performance in catalytic co-gasification: A review. Renewable and Sustainable Energy Reviews, 105. pp. 252-267.

Ismail, M. and Bakaruddin, B.R. and Lethesh, K.C. and Mutalib, M.I.A. and Shah, S.N. (2019) Experimental and theoretical study on extraction and recovery of naphthenic acid using dicyanamide-based ionic liquids. Separation and Purification Technology. pp. 199-212.

Irfan, M. and Saad, N. and Alwadie, A. and Awais, M. and Aman Sheikh, M. and Glowacz, A. and Kumar, V. (2019) An Automated Feature Extraction Algorithm for Diagnosis of Gear Faults. Journal of Failure Analysis and Prevention, 19 (1). pp. 98-105.

Ishaq, S. and Tamime, R. and Bilad, M.R. and Khan, A.L. (2019) Mixed matrix membranes comprising of polysulfone and microporous Bio-MOF-1: Preparation and gas separation properties. Separation and Purification Technology, 210. pp. 442-451.

Idris, A. and Man, Z. and Maulud, A.S. and Mannan, H.A. and Shafie, A. (2019) Effect of silane coupling agents on properties and performance of polycarbonate/silica MMMs. Polymer Testing, 73. pp. 159-170.

Irshad, K. and Habib, K. and Saidur, R. and Kareem, M.W. and Saha, B.B. (2019) Study of thermoelectric and photovoltaic facade system for energy efficient building development: A review. Journal of Cleaner Production, 209. pp. 1376-1395.

Ilyas, S.U. and Pendyala, R. and Narahari, M. (2019) Experimental investigation of natural convection heat transfer characteristics in MWCNT-thermal oil nanofluid. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 1197-1209.

Ibrahim, A.E. and Nor, N.M. and Nawi, I.B.M. and Romlie, M.F. and Hasan, K.N.M. (2019) Genetic algorithm to improve power output of photovoltaic system under partial shaded condition. International Journal of Power Electronics and Drive Systems, 10 (4). pp. 2182-2189.

Irshad, K. and Algarni, S. and Ahmad, M.T. and Irfan, S.A. and Habib, K. and Abdelmohimen, M.A.H. and Hasan Zahir, Md. and Sayeed Ahmed, G.M. (2019) Microclimate thermal management using thermoelectric air-cooling duct system operated at five incremental powers and its effect on sleep adaptation of the occupants. Energies, 12 (19).

Iqbal, O. and Ahmad, M. and Padmanabhan, E. (2019) New model of brittleness index to locate the sweet spots for hydraulic fracturing in unconventional reservoirs. ARPN Journal of Engineering and Applied Sciences, 14 (18). pp. 3271-3283.

Inayat, M. and Sulaiman, S.A. and Kurnia, J.C. (2019) Catalytic co-gasification of coconut shells and oil palm fronds blends in the presence of cement, dolomite, and limestone: Parametric optimization via Box Behnken Design. Journal of the Energy Institute, 92 (4). pp. 871-882.

Irfan, M. and Alwadie, A. and Saad, N. and Sheikh, M.A. (2019) Analysis of bearing faulty cage using non-intrusive condition monitoring techniques. Renewable Energy and Power Quality Journal, 17. pp. 20-25.

Irshad, K. and Habib, K. and Algarni, S. and Saha, B.B. and Jamil, B. (2019) Sizing and life-cycle assessment of building integrated thermoelectric air cooling and photovoltaic wall system. Applied Thermal Engineering, 154. pp. 302-314.

Izzatie, N.I. and Basha, M.H. and Uemura, Y. and Hashim, M.S.M. and Afendi, M. and Mazlan, M.A.F. (2019) Co-pyrolysis of rubberwood sawdust (RWS) and polypropylene (PP) in a fixed bed pyrolyzer. Journal of Mechanical Engineering and Sciences, 13 (1). pp. 4636-4647.

Ishak, K.E.H.K. and Ayoub, M.A. (2019) Predicting the Efficiency of the Oil Removal from Surfactant and Polymer Produced Water by Using Liquid-Liquid Hydrocyclone: Comparison of Prediction Abilities between Response Surface Methodology and Adaptive Neuro-Fuzzy Inference System. IEEE Access, 7. pp. 179605-179619.

Izhar, L.I. and Roslan, N.S. and Feng, Y.X. and Faye, I. and Ho, E.T.W. and Rahman, M.A. (2019) Classification of neuroticism using psychophysiological signals during speaking task based on two different baseline measurements. International Journal of Integrated Engineering, 11 (3). pp. 119-128.

Idris, A. and Man, Z. and Bustam, A. and Rabat, N.E. and Uddin, F. and Abdul Mannan, H. (2019) Grindability and abrasive behavior of coal blends: analysis and prediction. International Journal of Coal Preparation and Utilization.

Irawan, S. and Shanmugam, A.K. and Hidayat, M.I.P. and Biyanto, T.R. (2019) Study of lateral vibration of drilling string with mass imbalance using finite element. International Journal on Advanced Science, Engineering and Information Technology, 9 (3). pp. 816-821.

Idress, M. and Shahril, M.A. and Zuraidin, A.S. and Jasamai, M. (2019) Experimental investigation of methane hydrate induction time in the presence of cassava peel as a hydrate inhibitor. Energies, 12 (12).

J

Jeremiah, Sean Suraj and Zabiri, Haslinda and Ramasamy, Marappagounder and Teh, Weng Kean and Kamaruddin, Bashariah and Amiruddin, Ahmad Azharuddin Azhari Mohd (2019) Generic framework for valve stiction detection and compensation with ANFIS-activated dual-mode MPC. Journal of Process Control, 79. pp. 85-97.

Jameel, S.M. and Hashmani, M.A. and Alhussain, H. and Budiman, A. (2019) A fully adaptive image classification approach for industrial revolution 4.0. Advances in Intelligent Systems and Computing, 843. pp. 311-321.

Jaafar, N.S.M. and Aziz, I.A. and Jaafar, J. and Mahmood, A.K. and Gilal, A.R. (2019) A survey on signal processing methods in fiber optic sensor for oxidized carbon steel. Advances in Intelligent Systems and Computing, 765. pp. 13-24.

Jaafar, N.S.M. and Aziz, I.A. and Jaafar, J. and Mahmood, A.K. (2019) An approach of filtering to select IMFs of EEMD in acoustic emission AE sensors for oxidized carbon steel. Advances in Intelligent Systems and Computing, 859. pp. 255-273.

Jaafar, N.S.M. and Aziz, I.A. and Hasan, M.H.B. and Mahmood, A.K. (2019) Parameter calculation in time analysis for the approach of filtering to select IMFs of EMD in AE sensors for leakage signature. Advances in Intelligent Systems and Computing, 985. pp. 139-146.

Jufar, S.R. and Al-Shami, T.M. and Djuraev, U. and Negash, B.M. and Rahman, M.M. (2019) Flow behaviour of oil blob through a capillary tube constriction during pulsed injection. Jurnal Teknologi, 81 (1). pp. 31-38.

John, I. and Pola, J. and Thanabalan, M. and Appusamy, A. (2019) Bioethanol Production from Musambi Peel by Acid Catalyzed Steam Pretreatment and Enzymatic Saccharification: Optimization of Delignification Using Taguchi Design. Waste and Biomass Valorization.

Javvad ur Rehman, M. and Dass, S.C. and Asirvadam, V.S. (2019) An augmented sequential MCMC procedure for particle based learning in dynamical systems. Signal Processing, 160. pp. 32-44.

Janjuhah, H.T. and Alansari, A. and GÃ¡mez Vintaned, J.A. (2019) Quantification of microporosity and its effect on permeability and acoustic velocity in Miocene carbonates, Central Luconia, offshore Sarawak, Malaysia. Journal of Petroleum Science and Engineering. pp. 108-119.

Jan, A. and Marimuthu, M. and Shad, M.K. and ur-Rehman, H. and Zahid, M. and Jan, A.A. (2019) Bankruptcy profile of the Islamic and conventional banks in Malaysia: a post-crisis period analysis. Economic Change and Restructuring, 52 (1). pp. 67-87.

Jan, A. and Marimuthu, M. and @ Mat Isa, M.P.B.M. (2019) The nexus of sustainability practices and financial performance: From the perspective of Islamic banking. Journal of Cleaner Production, 228. pp. 703-717.

Jie, Y.J. and Kamaruddin, S. and Mustapha, M. and Siddiquee, A.N. and Al-Ahmari, A. and Khan, Z.A. and Abidi, M.H. and Gangil, N. (2019) Reclamation of steel shots by acid leaching for powder metallurgy applications. Advances in Mechanical Engineering, 11 (7).

Jeremiah, S.S. and Zabiri, H. and Ramasamy, M. and Teh, W.K. and Kamaruddin, B. and Mohd Amiruddin, A.A.A. (2019) Generic framework for valve stiction detection and compensation with ANFIS-activated dual-mode MPC. Journal of Process Control, 79. pp. 85-97.

Javvad ur Rehman, M. and Dass, S.C. and Asirvadam, V.S. (2019) An augmented sequential MCMC procedure for particle based learning in dynamical systems. Signal Processing, 160. pp. 32-44.

Jilani, M.T. and Rehman, M.Z.U. and Khan, A.M. and Chughtai, O. and Abbas, M.A. and Khan, M.T. (2019) An implementation of IoT-based microwave sensing system for the evaluation of tissues moisture. Microelectronics Journal, 88. pp. 117-127.

Jajuli, M.N. and Hussin, M.H. and Rahim, A.A. and Saad, B. and HÃ©brant, M. and Herzog, G. (2019) Preliminary assays on electrochemically modulated liquid-liquid extraction of metformin. Journal of Physical Science, 30. pp. 153-166.

K

Kumaraningrum, Anggraini Ratih and Indra, Ajang and Putri, Dwini Normayulisa and Shariff, Azmi Mohd and Hermansyah, Heri (2019) Semi-quantitative risk analysis of a normally unmanned installation facility. Journal of Petroleum Exploration and Production Technology, 9 (4). pp. 3135-3147.

Kamran Shereen, M. and Khattak, M.I. and Witjaksono, G. (2019) A brief review of frequency, radiation pattern, polarization, and compound reconfigurable antennas for 5G applications. Journal of Computational Electronics.

Kumar, D. and Gandhamal, A. and Talbar, S. and Hani, A.F.M. (2019) Knee articular cartilage segmentation from MR images: A Review. ACM Computing Surveys, 51 (5).

Khan, Muhammad Saad and Lal, Bhajan and Shariff, Azmi Mohd and Mukhtar, Hilmi (2019) Ammonium hydroxide ILs as dual-functional gas hydrate inhibitors for binary mixed gas (carbon dioxide and methane) hydrates. Journal of Molecular Liquids, 274. pp. 33-44.

Kabeb, S.M. and Hassan, A. and Mohamad, Z. and Sharer, Z. and Mokhtar, M. and Ahmad, F. (2019) Exploring the effects of nanofillers of epoxy nanocomposite coating for sustainable corrosion protection. Chemical Engineering Transactions, 72. pp. 121-126.

Kharchenko, V. and Nikitin, B. and Tikhonov, P. and Panchenko, V. and Vasant, P. (2019) Evaluation of the Silicon Solar Cell Parameters. Advances in Intelligent Systems and Computing, 866. pp. 328-336.

Koyyada, G. and Prabhakar Vattikuti, S.V. and Shome, S. and Shim, J. and Chitturi, V. and Jung, J.H. (2019) Enhanced solar light-driven photocatalytic degradation of pollutants and hydrogen evolution over exfoliated hexagonal WS2 platelets. Materials Research Bulletin, 109. pp. 246-254.

Khan, Nadia and Taqvi, Syed Ali Ammar and Bin Rafiq, Hamza and Nafees, Asra and Zabiri, Haslinda (2019) Selection of Appropriate Model for the Synthesis of Coal Water Slurry (CWS) Using PVA and TEA. Iranian Journal of Chemistry and Chemical Engineering, 38 (2). pp. 253-261.

Khan, Muhammad Saad and Lal, Bhajan and Keong, Lau Kok and Ahmed, Iqbal (2019) Tetramethyl ammonium chloride as dual functional inhibitor for methane and carbon dioxide hydrates. Fuel, 236. pp. 251-263.

Kaur, H. and Jaafar, A. (2019) Interfacial tension prediction of readily-mixed waxy crude oil emulsion at pour point temperature. Key Engineering Materials, 818 KE. pp. 62-71.

Kueh, B.W.B. and Yusup, S. and Osman, N. and Ramli, N.H. (2019) Analysis of Melaleuca cajuputi extract as the potential herbicides for paddy weeds. Sustainable Chemistry and Pharmacy, 11. pp. 36-40.

Koh, C.K. and Chin, J.F. and Kamaruddin, S. (2019) Modified short-run statistical process control for test and measurement process. International Journal of Advanced Manufacturing Technology, 100 (5-8). pp. 1531-1548.

Kim, D.K. and Wong, E.W.C. and Lee, E.B. and Yu, S.Y. and Kim, Y.T. (2019) A method for the empirical formulation of current profile. Ships and Offshore Structures, 14 (2). pp. 176-192.

Kim, J. and Sambudi, N.S. and Cho, K. (2019) Removal of Sr2+ using high-surface-area hydroxyapatite synthesized by non-additive in-situ precipitation. Journal of Environmental Management, 231. pp. 788-794.

Khan, J.A. and Al-Kayiem, H.H. and Aleem, W. and Saad, A.B. (2019) Influence of alkali-surfactant-polymer flooding on the coalescence and sedimentation of oil/water emulsion in gravity separation. Journal of Petroleum Science and Engineering, 173. pp. 640-649.

Khan, M.S. and Lal, B. and Shariff, A.M. and Mukhtar, H. (2019) Ammonium hydroxide ILs as dual-functional gas hydrate inhibitors for binary mixed gas (carbon dioxide and methane) hydrates. Journal of Molecular Liquids, 274. pp. 33-44.

Khan, M.S. and Lal, B. and Keong, L.K. and Ahmed, I. (2019) Tetramethyl ammonium chloride as dual functional inhibitor for methane and carbon dioxide hydrates. Fuel, 236. pp. 251-263.

Khattak, M.I. and Sohail, A. and Khan, U. and Ullah, Z. and Witjaksono, G. (2019) Elliptical slot circular patch antenna array with dual band behaviour for future 5G mobile communication networks. Progress In Electromagnetics Research C, 89. pp. 133-147.

Kim, D.K. and Wong, E.W.C. and Lekkala, M.K.R. (2019) A parametric study on fatigue of a top-tensioned riser subjected to vortex-induced vibrations. Structural Monitoring and Maintenance, 6 (4). pp. 365-387.

Kadir, E.A. and Irie, H. and Rosa, S.L. and Othman, M. (2019) Modelling of wireless sensor networks for detection land and forest fire hotspot. Telkomnika (Telecommunication Computing Electronics and Control), 17 (6). pp. 2772-2781.

Kumar, P. and Woon, K.L. and Wong, W.S. and Mohamed Saheed, M.S. and Burhanudin, Z.A. (2019) Hybrid film of single-layer graphene and carbon nanotube as transparent conductive electrode for organic light emitting diode. Synthetic Metals, 257.

Khan, Z. and Yusup, S. and Aslam, M. and Inayat, A. and Shahbaz, M. and Raza Naqvi, S. and Farooq, R. and Watson, I. (2019) NO and SO2 emissions in palm kernel shell catalytic steam gasification with in-situ CO2 adsorption for hydrogen production in a pilot-scale fluidized bed gasification system. Journal of Cleaner Production, 236.

Kurnia, J.C. and Sasmito, A.P. and Shamim, T. (2019) Advances in proton exchange membrane fuel cell with dead-end anode operation: A review. Applied Energy, 252.

Kosalishkwaran, G. and Parasuraman, S. and Singh, D.K.J. and Natarajan, E. and Elamvazuthi, I. and George, J. (2019) Measurement of range of motions of L3-L4 healthy spine through offsetting reflective markers and in silico analysis of meshed model. Medical and Biological Engineering and Computing, 57 (10). pp. 2305-2318.

Kamal, K. and Bustam, M.A. and Shariff, A.M. and PrÃ©, P. and Hamon, L. (2019) Indexing PXRD structural parameters of graphene oxide-doped metal-organic frameworks. International Journal of Recent Technology and Engineering, 8 (2 Spec). pp. 550-553.

Khan, F.A. and Hisham, S. and Ghasemi, M. (2019) Oil field produced water recovery and boosting the quality for using in membrane less fuel cell. SN Applied Sciences, 1 (6).

Kanesan, D. and Chandran, D. and Bin Azhar, N.A. (2019) Contamination effect of synthetic based mud on fly ash based geopolymer cement slurry. ARPN Journal of Engineering and Applied Sciences, 14 (10). pp. 1871-1875.

Kaur, K. and Kalid, K.S. and Sugathan, S.K. (2019) UX guideline for children educational mobile application: Pilot case study. International Journal of Engineering and Advanced Technology, 8 (5). pp. 39-46.

Kajo, I. and Kamel, N. and Ruichek, Y. (2019) Incremental Tensor-Based Completion Method for Detection of Stationary Foreground Objects. IEEE Transactions on Circuits and Systems for Video Technology, 29 (5). pp. 1325-1338.

Krishnamurthy, S. and Kannan, R. and Kiong, C.C. and Ibrahim, T.B. and Abdullah, Y. (2019) Impact of gamma-ray irradiation on dynamic characteristics of Si and SiC power MOSFETs. International Journal of Electrical and Computer Engineering, 9 (2). pp. 1453-1460.

Khan, J. and Malik, A.S. and Kamel, N. and Dass, S.C. (2019) Highlights removal using reflected energy and histogram analysis. Journal of Engineering Research, 7 (1).

Kim, D.K. and Wong, E.W.C. and Lee, E.B. and Yu, S.Y. and Kim, Y.T. (2019) A method for the empirical formulation of current profile. Ships and Offshore Structures, 14 (2). pp. 176-192.

Khan, R. and Ya, H.H. and Pao, W. (2019) Numerical investigation of the influence of sand particle concentration on long radius elbow erosion for liquid-solid flow. International Journal of Engineering, Transactions A: Basics, 32 (10). pp. 1485-1490.

Khan, F.N. and Ahmad, R. and Ahmed, W. and Alam, M.M. and Drieberg, M. (2019) Interference and Priority Aware Coexistence (IPC) Algorithm for Link Scheduling in IEEE 802.15.6 Based WBANs. IEEE Access, 7. pp. 168736-168751.

Kaur, H. and Jaafar, A. (2019) Interfacial tension prediction of readily-mixed waxy crude oil emulsion at pour point temperature. Key Engineering Materials, 818 KE. pp. 62-71.

Kolandaisamy, I. and Marimuthu, M. and Shammugam, S. (2019) Does decision making style of top management team impact the firmâ��s performance? Journal of Advanced Research in Dynamical and Control Systems, 11 (5 Spec). pp. 550-554.

Khan, M.I. and Khattak, M.I. and Witjaksono, G. and Barki, Z.U. and Ullah, S. and Khan, I. and Lee, B.M. (2019) Experimental investigation of a planar antenna with band rejection features for ultra-wide band (UWB) wireless networks. International Journal of Antennas and Propagation, 2019.

Kaur, K. and Kalid, K.S. and Sugathan, S.K. (2019) Proposed UX model for children educational mobile application. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 11870 . pp. 601-610.

Kurnia, K.A. and Harimurti, S. and Yung, H.K. and Baraheng, A. and Sham Alimin, M.A. and Dagang, N.S.M. and Fadhilah, A. and Rosyadi, R. and Nisa Yahya, W.Z. and Bustam, M.A. (2019) Understanding the effect of pH on the solubility of Gamavuton-0 in the aqueous solution: Experimental and COSMO-RS modelling. Journal of Molecular Liquids, 296.

Khan, R. and Ya, H.H. and Pao, W. (2019) An experimental study on the erosion-corrosion performance of AISI 1018 carbon steel and AISI 304L stainless steel 90-degree elbow pipe. Metals, 9 (12).

Khan, M.I. and Huat, H.Y. and bin Muhamad Dun, M.H. and Sutanto, M.H. and Jarghouyeh, E.N. and Zoorob, S.E. (2019) Effect of irradiated and non-irradiated waste PET based cementitious grouts on flexural strength of semi-flexible pavement. Materials, 12 (24).

Khoo, C.-M. and Gopalan, T. and Rahman, N.â��.A. and Mohamad, H. (2019) Volume Loss Caused By Tunnelling In Kenny Hill Formation. International Journal of GEOMATE, 16 (54). pp. 164-169.

Kuan, Y.Z. and Kutty, S.R.M. and Ghaleb, A.A.S. (2019) Kinetics coefficient of palm oil clinker media for an attached growth media in sequencing batch reactor mode. Journal of Ecological Engineering, 20 (9). pp. 18-27.

Khan, Muhammad Saad and Lal, Bhajan and Sabil, Khalik Mohamad and Ahmed, Iqbal (2019) Desalination of seawater through gas hydrate process: an overview. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (1). pp. 65-73.

L

Lock, Serene Sow Mun and Lau, Kok Keong and Shariff, Azmi Mohd and Yeong, Yin Fong and Jusoh, Norwahyu (2019) Experimental Plasticization in Study Polysulfone of CO2 Membrane for Biogas Processing. Anaerobic Digestion. p. 199.

Lock, Serene Sow Mun and Lau, Kok Keong and Shariff, Azmi Mohd and Yeong, Yin Fong and Ban, Zhen Hong and Tay, Wee Horng (2019) Process simulation and optimization of oxygen enriched combustion using thin polymeric membranes: effect of thickness and temperature dependent physical aging. Journal of Chemical Technology & Biotechnology, 94 (9). pp. 2844-2868.

Lee, K. and Adil, M. and Mohd. Zaid, H. and Guan, B.H. and Soleimani, H. and Weis, M. (2019) Wettability, interfacial tension (IFT) and viscosity alteration of nanofluids under electromagnetic (EM) waves for enhanced oil recovery (IFT) applications. Advanced Structured Materials, 92. pp. 305-311.

Lemma, T.A. and Nanji, P. and Gebremariam, M.A. and Ahsan, S. (2019) Remaining useful life prediction of drill string using fuzzy systems and cumulative damage theory. Key Engineering Materials, 796. pp. 145-154.

Leal Filho, W. and Ellams, D. and Han, S. and Tyler, D. and Boiten, V.J. and Paco, A. and Moora, H. and Balogun, A.-L. (2019) A review of the socio-economic advantages of textile recycling. Journal of Cleaner Production, 218. pp. 10-20.

Lim, J.-W. and Mohd-Noor, S.-N. and Wong, C.-Y. and Lam, M.-K. and Goh, P.-S. and Beniers, J.J.A. and Oh, W.-D. and Jumbri, K. and Ghani, N.A. (2019) Palatability of black soldier fly larvae in valorizing mixed waste coconut endosperm and soybean curd residue into larval lipid and protein sources. Journal of Environmental Management, 231. pp. 129-136.

Latif, W.M.S.M. and Sharbini, S.N. and Wan Sulaiman, W.R. and Idris, A.K. (2019) Utilization of silicon dioxide nanoparticles in foam enhanced oil recovery - A comprehensive review. IOP Conference Series: Materials Science and Engineering, 469 (1).

Lim, Y.P. and Toh, Y.L. and Cheab, S. and Lucyszyn, S. and Wong, P.W. (2019) Coupling matrix synthesis and design of a chained-function waveguide filter. Asia-Pacific Microwave Conference Proceedings, APMC, 2018-N. pp. 103-105.

Loy, A.C.M. and Quitain, A.T. and Lam, M.K. and Yusup, S. and Sasaki, M. and Kida, T. (2019) Development of high microwave-absorptive bifunctional graphene oxide-based catalyst for biodiesel production. Energy Conversion and Management. pp. 1013-1025.

Lew, C.L. and Hermana, M. and Ghosh, D.P. (2019) Improvised approach using SQP-SQS attributes for hydrocarbon prediction: A field case study in Malay basin. 2018 SEG International Exposition and Annual Meeting, SEG 2018. pp. 3105-3109.

Liu, C. and Ghosh, D.P. and Salim, A.M.A. and Chow, W.S. (2019) A new fluid factor and its application using a deep learning approach. Geophysical Prospecting, 67 (1). pp. 140-149.

Liu, C. and Ghosh, D. and Salim, A.M.A. (2019) Uncertainty analysis of two methods in hydrocarbon prediction under different water saturation and noise conditions. Applied Sciences (Switzerland), 9 (23).

Lau, Z.Y. and Lee, K.C. and Soleimani, H. and Beh, H.G. (2019) Experimental study of electromagnetic-assisted rare-earth doped yttrium iron garnet (YIG) nanofluids on wettability and interfacial tension alteration. Energies, 12 (20).

Lim, C.E. and Ooi, M.L. and Wong, R.C.S. and Neo, K.E. and Mumtaz, A. and Mazhar, M. and Mohamed, N.M. and Saheed, M.S.M. (2019) Facile synthesis of molybdenum multisulfide composite nanorod arrays from single-source precursor for photoelectrochemical hydrogen generation. Applied Nanoscience (Switzerland), 9 (6). pp. 1281-1292.

Lau, A.K.S. and Bilad, M.R. and Osman, N.B. and Marbelia, L. and Putra, Z.A. and Nordin, N.A.H.M. and Wirzal, M.D.H. and Jaafar, J. and Khan, A.L. (2019) Sequencing batch membrane photobioreactor for simultaneous cultivation of aquaculture feed and polishing of real secondary effluent. Journal of Water Process Engineering, 29.

Letchumanan, I. and Gopinath, S.C.B. and Md Arshad, M.K. and Anbu, P. and Lakshmipriya, T. (2019) Gold nano-urchin integrated label-free amperometric aptasensing human blood clotting factor IX: A prognosticative approach for â��Royal diseaseâ��. Biosensors and Bioelectronics, 131. pp. 128-135.

Laziz, A.M. and Shaari, K.Z.K. and Hamid, N.H. (2019) Quantitative analysis of interfacial area on liquid-liquid multiphase flow of transesterification process in cross-junction microchannel reactor. Journal of Engineering and Technological Sciences, 51 (4). pp. 585-596.

Law, C.C. and Zainal, M.Z. and Chew, K.H. and Lee, J.H. (2019) Hybrid model for determining dual string gas lift split factor in oil producers. Energies, 12 (12).

M

Mahinder Singh, Balbir Singh (2019) Surface Plasmon Assisted Electron-Hole Migration for High Photocurrent Density Generation in a Perovskite Solar Cell. Surface Plasmon Assisted Electron-Hole Migration for High Photocurrent Density Generation in a Perovskite Solar Cell. (Submitted)

Mohsin, Hanan Mohamed and Shariff, Azmi Mohd and Johari, Khairiraihanna (2019) 3-Dimethylaminopropylamine (DMAPA) mixed with glycine (GLY) as an absorbent for carbon dioxide capture and subsequent utilization. Separation and Purification Technology, 222. pp. 297-308.

Mushtaq, Asim and Mukhtar, Hilmi and Shariff, Azmi Mohd (2019) Modelling for Gas Transport in Enhanced Polymeric Blend Membrane. J. Chem. Soc. Pak, 41 (04). p. 613.

Majid, Mohd Amin Abd and Ya, Hamdan Haji and Mamat, Othman and Mahadzir, Shuhaimi (2019) Techno economic evaluation of cold energy from Malaysian liquefied natural gas regasification terminals. Energies, 12 (23). pp. 1-14.

Mohamed Mohsin, Hanan and Johari, Khairiraihanna and Mohd Shariff, Azmi (2019) Absorbents, Media, and Reagents for Carbon Dioxide Capture and Utilization. Sustainable Agriculture Reviews 38: Carbon Sequestration Vol. 2 Materials and Chemical Methods. pp. 41-62.

Mushtaq, Asim and Mukhtar, Hilmi and Shariff, Azmi Mohd (2019) Properties and Characteristic of Amine-Polymer Blend Membrane. J. Chem. Soc. Pak, 41 (02). p. 230.

Mustaq, A and Mukhtar, Hasan and Shariff, Azmi Mohd (2019) Performance of Enhanced Polymeric Blend Membranes for the separation of CO2/CH4 mixtures. Afinidad, 76 (585).

Mushtaq, Asim and Mukhtar, Hilmi and Shariff, Azmi Mohd (2019) Solubility Parameter Study of Polysulfone, Polyvinyl Acetate in Dimethylacetamide Solvent. Journal of the Chemical Society of Pakistan, 41 (1). p. 203.

Mohammed, Salah E and Baharom, MB and A. Aziz, A Rashid and Zainal A, Ezrann Z (2019) Modelling of combustion characteristics of a single curved-cylinder spark-ignition crank-rocker engine. Energies, 12 (17). p. 3313.

Mushtaq, Asim and Mukhtar, Hilmi and Shariff, Azmi Mohd (2019) Performance Enhancement of Polymeric Blend Membranes Incorporation of Methyl Diethanol amine for CO2/CH4 Separation. Journal of the Chemical Society of Pakistan, 41 (3). p. 523.

Mohd Jaafar, N.S. and Aziz, I.A. and Jaafar, J. and Mahmood, A.K. and Gilal, A.R. (2019) An enhance approach of filtering to select adaptive IMFs of EEMD in fiber optic sensor for oxidized carbon steel. Advances in Intelligent Systems and Computing, 764. pp. 241-255.

Mokri, Nurul Afiqah and Ching, Oh Pei and Mukhtar, Hilmi and Leng, Chew Thiam (2019) Tailoring particle size and agglomeration state of mesoporous MCM-48 via optimisation of sol-gel silica process. Journal of Physical Science, 30 (1). pp. 145-168.

Mushtaq, Asim and Mukhtar, Hilmi and Shariff, Azmi Mohd (2019) Modelling for Gas Transport in Enhanced Polymeric Blend Membrane. J. Chem. Soc. Pak, 41 (04). p. 613.

Mushtaq, Asim and Mukhtar, Hilmi and Shariff, Azmi Mohd (2019) Properties and Characteristic of Amine-Polymer Blend Membrane. J. Chem. Soc. Pak, 41 (02). p. 230.

Mohshim, Dzeti F and Mukhtar, Hilmi and Dutta, Binay K and Man, Zakaria (2019) Predicting CO2 Permeation through an enhanced ionic liquid mixed matrix membrane (IL3M). International Journal of Chemical Engineering, 2019.

Mubashir, Muhammad and Yeong, Yin Fong and Lau, Kok Keong and Chew, Thiam Leng (2019) Effect of spinning conditions on the fabrication of cellulose acetate hollow fiber membrane for CO2 separation from N2 and CH4. Polymer Testing, 73. pp. 1-11.

Murugiah, Pannir Selvam and Oh, Pei Ching and Lau, Kok Keong (2019) Collegial effect of carbonaceous hybrid fillers in mixed matrix membrane development. Reactive and Functional Polymers, 135. pp. 8-15.

Mubashir, Muhammad and Yeong, Yin Fong and Chew, Thiam Leng and Lau, Kok Keong (2019) Comparison of post-treatment methods on the performance of hollow fiber membranes containing metal organic framework in gases separation. Industrial & Engineering Chemistry Research, 58 (17). pp. 7120-7130.

Mubashir, Muhammad and Yeong, Yin Fong and Chew, Thiam Leng and Lau, Kok Keong (2019) Optimization of spinning parameters on the fabrication of NH2-MIL-53 (Al)/cellulose acetate (CA) hollow fiber mixed matrix membrane for CO2 separation. Separation and Purification Technology, 215. pp. 32-43.

Magzoub, R.A.M. and Yassin, A.A.A. and Abdel-Rahim, A.M. and Gubartallah, E.A. and Miskam, M. and Saad, B. and Sabar, S. (2019) Photocatalytic detoxification of aflatoxins in Sudanese peanut oil using immobilized titanium dioxide. Food Control, 95. pp. 206-214.

Mohamed, Norani Muti (2019) Few-layer graphene supported polyaniline (PANI) film as a transparent counter electrode for dye-sensitized solar cells. Few-layer graphene supported polyaniline (PANI) film as a transparent counter electrode for dye-sensitized solar cells, 94.

Mohamed, Norani Muti (2019) Influence of seeding layer on photoelectrochemical hydrogen production over TiO2 nanorod decorated with reduced graphene oxide. DIAMOND AND RELATED MATERIALS, 94. ISSN 0925-9635

Mohamed, Norani Muti (2019) Life Cycle Assessment of Dye Sensitized Solar Cell in Malaysia. JURNAL KEJURUTERAAN, 31 (1). ISSN 0128-0198

Mohyaldinn, M.E. and Lin, W. and Gawi, O. and Ismail, M.C. and Ahmed, Q.A. and Ayoub, M.A. and Hasan, A. (2019) Experimental investigation of a new derived oleochemical corrosion inhibitor. Key Engineering Materials, 796. pp. 112-120.

Meyghani, B. and Awang, M. and Emamian, S. and Mohd Nor, M.K.B. (2019) Thermal Modelling of Friction Stir Welding (FSW) Using Calculated Youngâ��s Modulus Values. Lecture Notes in Mechanical Engineering. pp. 1-13.

Mohd Jaafar, N.S. and Aziz, I.A. and Jaafar, J. and Mahmood, A.K. (2019) An approach of filtering to select IMFs of EEMD in signal processing for acoustic emission AE sensors. Advances in Intelligent Systems and Computing, 860. pp. 100-111.

Meyghani, B. and Awang, M.B. (2019) A novel tool path strategy for modelling complicated perpendicular curved movements. Key Engineering Materials, 796. pp. 164-174.

Mokhtar, A.A. and Mulubran, F. and Muhammad, M. (2019) Probabilistic life cycle costing: A case study of centrifugal pumps. SpringerBriefs in Applied Sciences and Technology. pp. 53-71.

Mohammad Zubir, W.M.A. and Abdul Aziz, I. and Jaafar, J. (2019) Evaluation of machine learning algorithms in predicting CO2 internal corrosion in oil and gas pipelines. Advances in Intelligent Systems and Computing, 859. pp. 236-254.

Meor Said, M.A. and Zawawi, M.H.Z. (2019) Waste heat recovery from a gas turbine: Organic rankine cycle. SpringerBriefs in Applied Sciences and Technology. pp. 37-47.

Muhaimin, M. and Aziz, N. and Ariffin, M. (2019) Problematic of massively multiplayer online game addiction in Malaysia. Advances in Intelligent Systems and Computing, 843. pp. 749-760.

Mohammed, B.S. and Achara, B.E. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. (2019) Effects of elevated temperature on the tensile properties of NS-modified self-consolidating engineered cementitious composites and property optimization using response surface methodology (RSM). Construction and Building Materials, 206. pp. 449-469.

Mubashir, M. and Yeong, Y.F. and Chew, T.L. and Lau, K.K. (2019) Optimization of spinning parameters on the fabrication of NH 2 -MIL-53(Al)/cellulose acetate (CA) hollow fiber mixed matrix membrane for CO 2 separation. Separation and Purification Technology. pp. 32-43.

Marbelia, L. and Bilad, M.R. and Vankelecom, I.F.J. (2019) Gradual PVP leaching from PVDF/PVP blend membranes and its effects on membrane fouling in membrane bioreactors. Separation and Purification Technology. pp. 276-282.

Moshikur, R.M. and Chowdhury, M.R. and Wakabayashi, R. and Tahara, Y. and Moniruzzaman, M. and Goto, M. (2019) Ionic liquids with methotrexate moieties as a potential anticancer prodrug: Synthesis, characterization and solubility evaluation. Journal of Molecular Liquids, 278. pp. 226-233.

Motlagh, S.R. and Harun, R. and Biak, D.R.A. and Hussain, S.A. and Ghani, W.A.W.A.K. and Khezri, R. and Wilfred, C.D. and Elgharbawy, A.A.M. (2019) Screening of suitable ionic liquids as green solvents for extraction of eicosapentaenoic acid (EPA) from microalgae biomass using COSMO-RS model. Molecules, 24 (4).

Mohamad, M. and Mohammad, R. and May, T.S. and Wei, L.J. (2019) Removal of malachite green by sugarcane bagasse biochar using response surface methodology. AIP Conference Proceedings, 2068.

Mubashir, M. and Yeong, Y.F. and Lau, K.K. and Chew, T.L. (2019) Effect of spinning conditions on the fabrication of cellulose acetate hollow fiber membrane for CO2 separation from N2 and CH4. Polymer Testing, 73. pp. 1-11.

Murugiah, P.S. and Oh, P.C. and Lau, K.K. (2019) Collegial effect of carbonaceous hybrid fillers in mixed matrix membrane development. Reactive and Functional Polymers, 135. pp. 8-15.

Mawardzi, M.F.R.M. and Japper-Jaafar, A. and Najib, M.S. and Daud, S.M. and Ya, T.M.Y.S.T. (2019) Classification of waxy crude oil odor-profile using gas sensor array. IOP Conference Series: Materials Science and Engineering, 469 (1).

Mawardzi, M.F.R.M. and Japper-Jaafar, A. and Najib, M.S. and Daud, S.M. and Ya, T.M.Y.S.T. (2019) Intelligent classification of waxy crude oil odor-profile at different temperature. IOP Conference Series: Materials Science and Engineering, 469 (1).

Meor Said, M.A. and Zawawi, M.H.Z. (2019) Waste heat recovery from a gas turbine: Organic rankine cycle. SpringerBriefs in Applied Sciences and Technology. pp. 37-47.

Mokhtar, A.A. and Mulubran, F. and Muhammad, M. (2019) Probabilistic life cycle costing: A case study of centrifugal pumps. SpringerBriefs in Applied Sciences and Technology. pp. 53-71.

Mohammad Zubir, W.M.A. and Abdul Aziz, I. and Jaafar, J. (2019) Evaluation of machine learning algorithms in predicting CO 2 internal corrosion in oil and gas pipelines. Advances in Intelligent Systems and Computing, 859. pp. 236-254.

Malik, M.H.A. and Zung, L.S. (2019) Application of seismic attribute and spectral decomposition: Example of fluvial system during miocene in field a, Malay basin. Journal of Engineering and Applied Sciences, 14 (4). pp. 1110-1121.

Muhaimin, M. and Aziz, N. and Ariffin, M. (2019) Problematic of massively multiplayer online game addiction in Malaysia. Advances in Intelligent Systems and Computing, 843. pp. 749-760.

Moosazadeh, S. and Namazi, E. and Aghababaei, H. and Marto, A. and Mohamad, H. and Hajihassani, M. (2019) Prediction of building damage induced by tunnelling through an optimized artificial neural network. Engineering with Computers. pp. 1-13.

Murthe, Satisvar Sundera and Saheed, Mohamed Shuaib Mohamed and Perumal, Veeradasan and Saheed, Mohamed Salleh Mohamed and Mohamed, Norani Muti (2019) 11 - Electrospun Nanofibers for Biosensing Applications. 253 - 267.

Meor Said, M.A. and Zawawi, M.H.Z. (2019) Waste heat recovery from a gas turbine: Organic rankine cycle. SpringerBriefs in Applied Sciences and Technology. pp. 37-47.

Mokhtar, A.A. and Mulubran, F. and Muhammad, M. (2019) Probabilistic life cycle costing: A case study of centrifugal pumps. SpringerBriefs in Applied Sciences and Technology. pp. 53-71.

Malik, S. and Fatima, F. and Imran, A. and Chuah, L.F. and KlemeÅ¡, J.J. and Khaliq, I.H. and Asif, S. and Aslam, M. and Jamil, F. and Durrani, A.K. and Akbar, M.M. and Shahbaz, M. and Usman, M. and Atabani, A.E. and Naqvi, S.R. and Yusup, S. and Bokhari, A. (2019) Improved project control for sustainable development of construction sector to reduce environment risks. Journal of Cleaner Production, 240.

Mohammed, B.S. and Aswin, M. and Liew, M.S. and Zawawi, N.A.W.A. (2019) Structural Performance of RC and R-ECC Dapped-End Beams Based on the Role of Hanger or Diagonal Reinforcements Combined by ECC. International Journal of Concrete Structures and Materials, 13 (1).

Majid, M.A.A. and Ya, H.H. and Mamat, O. and Mahadzir, S. (2019) Techno economic evaluation of cold energy from Malaysian liquefied natural gas regasification terminals. Energies, 12 (23).

Mohammed, B.S. and Haruna, S. and Mubarak bn Abdul Wahab, M. and Liew, M.S. (2019) Optimization and characterization of cast in-situ alkali-activated pastes by response surface methodology. Construction and Building Materials, 225. pp. 776-787.

Maper, A. and Karuppanan, S. and Patil, S.S. (2019) Numerical analysis of low-velocity impact of carbon-basalt/epoxy hybrid laminates. Indian Journal of Engineering and Materials Sciences, 26 (5-6). pp. 349-355.

Masrom, S. and Rahman, A.S.A. and Omar, N. and Baharun, N. (2019) A new domain specific scripting language for automated machine learning pipeline. International Journal of Recent Technology and Engineering, 8 (2 Spec). pp. 529-534.

Maper, A. and Karuppanan, S. and Patil, S.S. (2019) Analysis and formulation of spur gear stresses with different tip modifications ä¸�å��é½¿å°�ä¿®æ£ç��ç�´é½¿è½®åº�å��å��æ��ä¸�è®¡ç®�. Journal of Central South University, 26 (9). pp. 2368-2378.

Murad, S.A.Z. and Azmi, N.A. and Harun, A. and Zulkifli, T.Z.A. (2019) A novel 1.6 kV high voltage low current step-up DC-DC converter with cockcroft-walton voltage multiplier for power supply modules. Jurnal Teknologi, 81 (5). pp. 113-119.

Mohamed, M. and Yusup, S. and Loy, A.C.M. (2019) Effect of Empty Fruit Bunch in Calcium Oxide for Cyclic CO2 Capture. Chemical Engineering and Technology, 42 (9). pp. 1840-1851.

Mohd Amiruddin, A.A.A. and Zabiri, H. and Jeremiah, S.S. and Teh, W.K. and Kamaruddin, B. (2019) Valve stiction detection through improved pattern recognition using neural networks. Control Engineering Practice, 90. pp. 63-84.

Mohammed, S.E. and Baharom, M.B. and Rashid Aziz, A.A. and Zainal, E.Z.Z. (2019) Modelling of combustion characteristics of a single curved-cylinder spark-ignition crank-rocker engine. Energies, 12 (17).

Musa, M.S.M. and Sulaiman, W.R.W. and Majid, Z.A. and Majid, Z.A. and Idris, A.K. and Rajaei, K. (2019) Application of henna extract in minimizing surfactant adsorption on quartz sand in saline condition: A sacrificial agent approach. SN Applied Sciences, 1 (8).

Mohsin, K.M. and Mokhtar, A.A. and W Tse, P. (2019) A fuzzy logic method: Predicting corrosion under insulation of piping systems with modelling of CUI 3D surfaces. International Journal of Pressure Vessels and Piping, 175.

Montasir, O.A. and Yenduri, A. and Kurian, V.J. (2019) Mooring System Optimisation and Effect of Different Line Design Variables on Motions of Truss Spar Platforms in Intact and Damaged Conditions. China Ocean Engineering, 33 (4). pp. 385-397.

Mahlia, T.M.I. and Syaheed, H. and Abas, A.E.Pg. and Kusumo, F. and Shamsuddin, A.H. and Ong, H.C. and Bilad, M.R. (2019) Organic rankine cycle (ORC) system applications for solar energy: Recent technological advances. Energies, 12 (15).

Mohamad, H. and Tee, B.P. and Chong, M.F. and Ang, K.A. and Rashid, A.S.A. and Abdullah, R.A. (2019) Instrumented laterally loaded pile test using distributed fibre optic sensor. Geotechnical Engineering, 50 (2). pp. 36-42.

Mohd Laziz, A. and KuShaari, K. and Chin, J. and Denecke, J. (2019) Quantitative analysis of hydrodynamic effect on transesterification process in T-junction microchannel reactor system. Chemical Engineering and Processing - Process Intensification, 140. pp. 91-99.

Mohd, M.H. and Zalaya, M.A. and Latheef, M. and Choi, H.S. and Rahman, M.A.A. and Kim, D.K. (2019) Ultimate bending capacity of aged fixed platform by considering the effect of marine fouling. Latin American Journal of Solids and Structures, 16 (5).

Mohammed, B.S. and Adamu, M. (2019) Non-destructive evaluation of nano silica-modified roller-compacted rubbercrete using combined SonReb and response surface methodology. Road Materials and Pavement Design, 20 (4). pp. 815-835.

Mukhtar, M.N.A. and Aziz, A.R.A. and Hagos, F.Y. and Noor, M.M. and Kadirgama, K. and Mamat, R. and Abdullah, A.A. (2019) The influence of formulation ratio and emulsifying settings on tri-fuel (dieselâ��ethanolâ��biodiesel) emulsion properties. Energies, 12 (9).

Meyghani, B. and Awang, M. and Bokam, P. and Plank, B. and Heinzl, C. and Siow, K.S. (2019) Finite element modeling of nano porous sintered silver material using computed tomography images Finite-Elemente-Modellierung von nano-porÃ¶sem gesinterten Silber unter Verwendung von Computertomographiebildern. Materialwissenschaft und Werkstofftechnik, 50 (5). pp. 533-538.

Mubashir, M. and Yeong, Y.F. and Chew, T.L. and Lau, K.K. (2019) Comparison of Post-Treatment Methods on the Performance of Hollow Fiber Membranes Containing Metal Organic Framework in Gases Separation. Industrial and Engineering Chemistry Research, 58 (17). pp. 7120-7130.

Mohmmed, A.O. and Al-Kayiem, H.H. and Nasif, M.S. and Time, R.W. (2019) Effect of slug flow frequency on the mechanical stress behavior of pipelines. International Journal of Pressure Vessels and Piping, 172. pp. 1-9.

Mustapha, J.R. and Sum, C.W. and Rafek, A.G. (2019) Rock slope stability assessment of gunung rapat limestone hills, kinta valley, Perak, Malaysia. International Journal of Recent Technology and Engineering, 7 (6). pp. 949-952.

Meriaudeau, F. and Tang, T.B. and Elamvazuthi, I. (2019) Special Section Guest Editorial: Advanced and Intelligent Vision Systems. Journal of Electronic Imaging, 28 (2).

Meyghani, B. and Awang, M. and Emamian, S. and Plank, B. and Christoph, H. and Siow, K.S. (2019) Stress analysis of nano porous material using computed tomography images Spannungsanalyse von nanoporÃ¶sem Material mittels Computertomographie-Aufnahmen. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 234-239.

Maghsoudi Nia, E. and Wan Abdullah Zawawi, N.A. and Mahinder Singh, B.S. (2019) Design of a pavement using piezoelectric materials Gestaltung eines Gehweges mittels piezoelektrischer Werkstoffe. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 320-328.

Memon, Z.Q. and Pao, W. and Hashim, F. and Ahmed, S. (2019) Experimental investigation of two-phase separation in a horizontal T-junction with vertical branch arm. Journal of Mechanical Engineering and Sciences, 13 (4). pp. 5922-5937.

Meyghani, B. and Awang, M.B. and Wu, C.S. (2019) Thermal analysis of friction stir welding with a complex curved welding seam. International Journal of Engineering, Transactions A: Basics, 32 (10). pp. 1480-1484.

Mohd Nordin, N.F. and Mohamad, H. (2019) Levee as a flood mitigation option in Malaysia, its' susceptibility to failure and design approach. International Journal of Integrated Engineering, 11 (9 Spec). pp. 224-233.

Muhammad, N.N. and Ching, D.L.C. and Amir Hamzah, A.S.S.S. (2019) Mathematical modelling of wastewater treatment in oxidation pond. Journal of Computational and Theoretical Nanoscience, 16 (11). pp. 4455-4460.

Matori, A.N. and Ab Latip, A.S. (2019) Settlement monitoring of liquefied natural gas terminal with persistent scatterer interferometry. Malaysian Construction Research Journal, 27 (1). pp. 39-48.

Memon, Z.Q. and Pao, W. and Hashim, F. and Ahmed, S. (2019) Experimental investigation of multiphase separation in different flow regimes through T-junction with an expander section. Journal of Mechanical Engineering and Sciences, 13 (2). pp. 5163-5181.

Mohammad Shuhaili, F. and Sulaiman, S. and Rambli, D.R.A. and Mahamad, S. (2019) Identifying suitable icon button for museum application interface using online card sorting method. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 11870 . pp. 628-639.

Mohamed Saheed, M.S. and Mohamed, N.M. and Mahinder Singh, B.S. and Jose, R. (2019) Surface Plasmon Assisted Electron-Hole Migration for High Photocurrent Density Generation in a Perovskite Solar Cell. ACS Applied Energy Materials, 2 (12). pp. 8707-8714.

Mahmood, Hamayoun and Moniruzzaman, Muhammad (2019) Recent advances of using ionic liquids for biopolymer extraction and processing. Biotechnology Journal, 14 (12). p. 1900072.

Mahmood, Hamayoun and Moniruzzaman, Muhammad and Iqbal, Tanveer and Khan, Maria Jafar (2019) Recent advances in the pretreatment of lignocellulosic biomass for biofuels and value-added products. Current Opinion in Green and Sustainable Chemistry, 20. pp. 18-24.

Mustahil, Noorul Adawiyah and Baharuddin, Siti Hawatulaila and Abdullah, Atikah Aini and Reddy, Ambavaram Vijaya Bhaskar and Mutalib, Mohamed Ibrahim Abdul and Moniruzzaman, Muhammad (2019) Synthesis, characterization, ecotoxicity and biodegradability evaluations of novel biocompatible surface active lauroyl sarcosinate ionic liquids. Chemosphere, 229. pp. 349-357.

Mahmood, Hamayoun and Ramzan, Naveed and Shakeel, Ahmad and Moniruzzaman, Muhammad and Iqbal, Tanveer and Kazmi, Mohsin Ali and Sulaiman, Muhammad (2019) Kinetic modeling and optimization of parameters for biomass pyrolysis: A comparison of different lignocellulosic biomass. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41 (14). pp. 1690-1700.

Mahmood, Hamayoun and Moniruzzaman, Muhammad and Iqbal, Tanveer and Yusup, Suzana and Rashid, Maaz and Raza, Ali (2019) Comparative effect of ionic liquids pretreatment on thermogravimetric kinetics of crude oil palm biomass for possible sustainable exploitation. Journal of Molecular Liquids, 282. pp. 88-96.

Moshikur, Rahman Md and Chowdhury, Md Raihan and Wakabayashi, Rie and Tahara, Yoshiro and Moniruzzaman, Muhammad and Goto, Masahiro (2019) Ionic liquids with methotrexate moieties as a potential anticancer prodrug: Synthesis, characterization and solubility evaluation. Journal of Molecular Liquids, 278. pp. 226-233.

Moniruzzaman, Muhammad and Goto, Masahiro (2019) Ionic liquid pretreatment of lignocellulosic biomass for enhanced enzymatic delignification. Application of ionic liquids in Biotechnology. pp. 61-77.

Moria, Hazim and Ahmed, Munner and Alghanmi, Ashraf and Mohamad, Taib Iskandar and Yaakob, Yusli (2019) Experimental study of solar based refrigerator using thermoelectric effect. Energy Procedia, 158. pp. 198-203.

Mohamad, Taib Iskandar and Moria, Hazim (2019) Performance and emissions of a hydrogen-enriched natural gas spark ignition engine with a dynamic-homogeneous mixer. Energy Procedia, 158. pp. 1924-1929.

N

NA, M Mukhtar and Abd Aziz, Abd Rashid and Hagos, Ftwi Y and Noor, MM and Kadirgama, Kumaran and Mamat, Rizalman and Abdullah, A Adam (2019) The influence of formulation ratio and emulsifying settings on tri-fuel (Diesel--Ethanol--Biodiesel) emulsion properties. Energies, 12 (9). p. 1708.

Nashed, Omar and Partoon, Behzad and Lal, Bhajan and Sabil, Khalik M and Shariff, Azmi Mohd (2019) Investigation of functionalized carbon nanotubes' performance on carbon dioxide hydrate formation. Energy, 174. pp. 602-610.

Nasif, M.S. (2019) Air-to-air fixed plate energy recovery heat exchangers for buildingâ��s HVAC systems. SpringerBriefs in Applied Sciences and Technology. pp. 63-71.

Nasif, M.S. (2019) Electrohydrodynamic pumps for dielectric liquid application. SpringerBriefs in Applied Sciences and Technology. pp. 85-92.

Nikbakht, E. and Al-Fakih, A. and Hui, C.C. and Jake, L.Y. and Mahzabin, M.S. (2019) An experimental investigation on the shear and flexural behavior of steel reinforced HPSCC beams. Structures, 19. pp. 286-295.

Nguyen, T.T. and Uemura, Y. and Lam, M.K. and Mansor, N. and Lim, J.W. (2019) Revealing the effect of reaction parameters towards alkyl group distribution in in-situ transesterification of Chlorella vulgaris. Energy Conversion and Management, 185. pp. 223-231.

Nasir, A.N.M. and Yahaya, N. and Zain, N.N.M. and Lim, V. and Kamaruzaman, S. and Saad, B. and Nishiyama, N. and Yoshida, N. and Hirota, Y. (2019) Thiol-functionalized magnetic carbon nanotubes for magnetic micro-solid phase extraction of sulfonamide antibiotics from milks and commercial chicken meat products. Food Chemistry, 276. pp. 458-466.

Nasrullah, A. and Saad, B. and Bhat, A.H. and Khan, A.S. and Danish, M. and Isa, M.H. and Naeem, A. (2019) Mangosteen peel waste as a sustainable precursor for high surface area mesoporous activated carbon: Characterization and application for methylene blue removal. Journal of Cleaner Production, 211. pp. 1190-1200.

Naqvi, S.R. and Tariq, R. and Hameed, Z. and Ali, I. and Naqvi, M. and Chen, W.-H. and Ceylan, S. and Rashid, H. and Ahmad, J. and Taqvi, S.A. and Shahbaz, M. (2019) Pyrolysis of high ash sewage sludge: Kinetics and thermodynamic analysis using Coats-Redfern method. Renewable Energy, 131. pp. 854-860.

Nasif, M.S. (2019) Electrohydrodynamic pumps for dielectric liquid application. SpringerBriefs in Applied Sciences and Technology. pp. 85-92.

Nasif, M.S. (2019) Air-to-air fixed plate energy recovery heat exchangers for buildingâ��s HVAC systems. SpringerBriefs in Applied Sciences and Technology. pp. 63-71.

Nasif, M.S. (2019) Electrohydrodynamic pumps for dielectric liquid application. SpringerBriefs in Applied Sciences and Technology. pp. 85-92.

Nallappan, M.L. and Nasef, M.M. and Ting, T.M. and Ahmad, A. (2019) Breakthrough modelling of glucamine functionalized PVDF nanofibrous adsorbent in a fixed-bed column for separation of boron from water. Desalination and Water Treatment, 162. pp. 134-141.

Naz, M.Y. and Shukrullah, S. and Sulaiman, S.A. and Khan, Y. and Alkanhal, M.A.S. and Ghaffar, A. (2019) Particle image velocimetry analysis of a swirling bed operation by using a mesh-coupled annular air distributor. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41 (9).

Naseer, A. and Ahmad, F. and Aslam, M. and Guan, B.H. and Harun, W.S.W. and Muhamad, N. and Raza, M.R. and German, R.M. (2019) A review of processing techniques for graphene-reinforced metal matrix composites. Materials and Manufacturing Processes, 34 (9). pp. 957-985.

Nashed, O. and Partoon, B. and Lal, B. and Sabil, K.M. and Shariff, A.M. (2019) Investigation of functionalized carbon nanotubesâ�� performance on carbon dioxide hydrate formation. Energy, 174. pp. 602-610.

Nanthini, R. and Mutalib, M.I. and Kurnia, K.A. (2019) Gravimetric, electrochemical and surface study on the good's buffer ionic liquid as corrosion inhibitor for carbon steel in acidic medium. Journal of Mechanical Engineering and Sciences, 13 (1). pp. 4434-4448.

Nallappan, M.L. and Nasef, M.M. and Ting, T.M. and Ahmad, A. (2019) Removal of boron from aqueous solutions using electrospun PVDF nanofibrous adsorbent modified by poly(Glycidyl methacrylate)/glucamine ligands. Desalination and Water Treatment, 140. pp. 163-171.

Ng, H.C. and Khe, C.S. and Yau, X.H. and Liu, W.W. and Aziz, A. (2019) Green synthesis of silver nanoparticles using hibiscus rosa-sinensis leaf extract. Nanoscience and Nanotechnology - Asia, 9 (4). pp. 472-478.

Ng, C.Y. and Narong, A.R. and Kamarul Zaman, A.B. and Mustaffa, Z. and Mohammed, B.S. and Ean, L.W. (2019) Properties of modified high permeable concrete with a crumb rubber. Open Civil Engineering Journal, 13 (1). pp. 82-91.

Nguyen, T.D.P. and Nguyen, D.H. and Lim, J.W. and Chang, C.-K. and Leong, H.Y. and Tran, T.N.T. and Vu, T.B. and Nguyen, T.T.C. and Show, P.L. (2019) Investigation of the relationship between bacteria growth and lipid production cultivating of microalgae chlorella vulgaris in seafood wastewater. Energies, 12 (12).

Nashed, Omar and Lal, Bhajan and Partoon, Behzad and Sabil, Khalik M and Hamed, Yaman (2019) Kinematic study of methane hydrate formation and self-preservation in the presence of functionalized carbon nanotubes. Energy & Fuels, 33 (8). pp. 7684-7695.

Nallakukkala, Sirisha and Sivabalan, V and Lal, B and Mokhtar Che Ismail, NDN (2019) Nonionic surfactants as corrosion inhibitors for carbon steel in hydrochloric acid medium. TEST Eng. Manag, 81. pp. 5830-5835.

O

Othman, Nurzatil A and Rostani, Khairul and Jalil, Abdullah AM and Zabiri, Haslinda and Tufa, Lemma D (2019) Dynamic Simulation and Control Structures of Feed Conditioning System for CO 2 Capture. Chemical Engineering Transactions, 72. pp. 301-306.

Othman, N.A. and Rostani, K. and Jalil, A.A.M. and Zabiri, H. and Tufa, L.D. (2019) Dynamic simulation and control structures of feed conditioning system for CO2 capture. Chemical Engineering Transactions, 72. pp. 301-306.

Othman, N.K. and Yahya, S. and Ismail, M.C. (2019) Corrosion inhibition of steel in 3.5 NaCl by rice straw extract. Journal of Industrial and Engineering Chemistry, 70. pp. 299-310.

Oh, W.-D. and Lee, M.G.-H. and Chanaka Udayanga, W.D. and Veksha, A. and Bao, Y. and Giannis, A. and Lim, J.-W. and Lisak, G. (2019) Insights into the single and binary adsorption of copper(II) and nickel(II) on hexagonal boron nitride: Performance and mechanistic studies. Journal of Environmental Chemical Engineering, 7 (1).

Oh, W.-D. and Veksha, A. and Chen, X. and Adnan, R. and Lim, J.-W. and Leong, K.-H. and Lim, T.-T. (2019) Catalytically active nitrogen-doped porous carbon derived from biowastes for organics removal via peroxymonosulfate activation. Chemical Engineering Journal, 374. pp. 947-957.

Osman, A.B. and Ovinis, M. and Hashim, F.M. and Faye, I. (2019) Wavelet-based optical velocimetry for oil spill flow rate estimation. Measurement: Journal of the International Measurement Confederation, 138. pp. 485-496.

Osman, A.B. and Ovinis, M. and Fakhruldin, M.H. and Faye, I. (2019) Experimental and numerical analysis of opaque turbulent buoyant jet. Journal of Applied Fluid Mechanics, 12 (6). pp. 1929-1943.

Othman, I. and Norfarahhanim Mohd Ghani, S. and Woon Choon, S. (2019) The Total Quality Management (TQM) journey of Malaysian building contractors. Ain Shams Engineering Journal.

P

Partoon, Behzad and Sabil, Khalik Mohamad and Lau, Kok Keong and Nasrifar, Khashayar and Shariff, Azmi Mohd (2019) Selective separation of methane from carbon dioxide through sII hydrates formation in a semibatch process. Industrial & Engineering Chemistry Research, 58 (36). pp. 16834-16842.

Panchenko, V. and Kharchenko, V. and Vasant, P. (2019) Modeling of Solar Photovoltaic Thermal Modules. Advances in Intelligent Systems and Computing, 866. pp. 108-116.

Paramaguru, D. and Pedapati, S.R. and Awang, M. (2019) A Review on Underwater Friction Stir Welding (UFSW). Lecture Notes in Mechanical Engineering. pp. 71-83.

Panchenko, V. and Kharchenko, V. and Vasant, P. (2019) Modeling of Solar Photovoltaic Thermal Modules. Advances in Intelligent Systems and Computing, 866. pp. 108-116.

Priya, V. and Sathiya Kumar, C. and Kannan, R. (2019) Resource scheduling algorithm with load balancing for cloud service provisioning. Applied Soft Computing Journal, 76. pp. 416-424.

Puspitasari, W.C. and Ahmad, F. and Ullah, S. and Hussain, P. and Megat-Yusoff, P.S.M. and Masset, P.J. (2019) The study of adhesion between steel substrate, primer, and char of intumescent fire retardant coating. Progress in Organic Coatings, 127. pp. 181-193.

Paramaguru, D. and Pedapati, S.R. and Awang, M. (2019) A Review on Underwater Friction Stir Welding (UFSW). Lecture Notes in Mechanical Engineering. pp. 71-83.

Perumal, Veeradasan and Mohamed, Norani Muti and Saheed, Mohamed Salleh Mohamed and Saheed, Mohamed Shuaib Mohamed (2019) 10 - Microtechnology and Nanotechnology Advancements Toward Bio-Molecular Targeting. 225 - 251.

Paramaguru, D. and Pedapati, S.R. and Awang, M. (2019) A Review on Underwater Friction Stir Welding (UFSW). Lecture Notes in Mechanical Engineering. pp. 71-83.

Partoon, B. and Sabil, K.M. and Lau, K.K. and Nasrifar, K. and Shariff, A.M. (2019) Selective Separation of Methane from Carbon Dioxide through sII Hydrates Formation in a Semibatch Process. Industrial and Engineering Chemistry Research, 58 (36). pp. 16834-16842.

Park, Y.-C. and Kim, S. and Lee, J.H. and Shinn, Y.J. (2019) Effect of reducing irreducible water saturation in a near-well region on CO2 injectivity and storage capacity. International Journal of Greenhouse Gas Control, 86. pp. 134-145.

Paputungan, I.V. and Hani, A.F.M. and Hassan, M.F. and Asirvadam, V.S. (2019) Real-time and proactive SLA renegotiation for a cloud-based system. IEEE Systems Journal, 13 (1). pp. 400-411.

Pan, H. and Lakshmipriya, T. and Gopinath, S.C.B. and Anbu, P. (2019) High-affinity detection of metal-mediated nephrotoxicity by aptamer nanomaterial complementation. Current Nanoscience, 15 (6). pp. 549-556.

Patil, S.S. and Karuppanan, S. and Atanasovska, I. (2019) A short review on frictional contact stress distribution in involute gears. Tribology in Industry, 41 (2). pp. 254-266.

Parveen Sultana, H. and Shrivastava, N. and Dominic, D.D. and Nalini, N. and Balajee, J.M. (2019) Comparison of machine learning algorithms to build optimized Network intrusion detection system. Journal of Computational and Theoretical Nanoscience, 16 (5-6). pp. 2541-2549.

Patil, N.A. and Pedapati, S.R. and Mamat, O.B. and Syah Lubis, A.M.H. (2019) Optimization of friction stir process parameters for enhancement in surface properties of Al 7075-SiC/Gr hybrid surface composites. Coatings, 9 (12).

Q

Qasim, Ali and Khan, Muhammad Saad and Lal, Bhajan and Shariff, Azmi Mohammad (2019) A perspective on dual purpose gas hydrate and corrosion inhibitors for flow assurance. Journal of Petroleum Science and Engineering, 183. p. 106418.

Qasim, Ali and Lal, Bhajan and Ali, Abulhassan and Bustam, Mohamad Azmi and Shariff, Azmi Mohd (2019) Optimization in Liquid-Vapor Region for Cryogenic based Separation Simulation of Natural Gas Components. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (1). pp. 88-101.

Qasim, Ali and Khan, Muhammad Saad and Lal, Bhajan and Shariff, Azmi Mohammad (2019) Phase equilibrium measurement and modeling approach to quaternary ammonium salts with and without monoethylene glycol for carbon dioxide hydrates. Journal of molecular liquids, 282. pp. 106-114.

Qi Ngui, J. and Prasad Ghosh, D. and Bin Wan Yusoff, W.I. (2019) Seismic Geomorphological Analysis of Late Miocene Sequences, Offshore Sabah Basin. 2018 SEG International Exposition and Annual Meeting, SEG 2018. pp. 1818-1822.

R

Rafiei, Alireza and Alsagri, Ali Sulaiman and Mahadzir, Shuhaimi and Loni, Reyhaneh and Najafi, Gholamhassan and Kasaeian, Alibakhsh (2019) Thermal analysis of a hybrid solar desalination system using various shapes of cavity receiver: Cubical, cylindrical, and hemispherical. Energy Conversion and Management, 198. p. 111861.

Ramkumar, M. and Siddiqui, N.A. and Mathew, M. and Sautter, B. and Hui, P.X. and Nagarajan, R. and Breitfeld, H.T. and Santosh, M. and Menier, D. and Poppelreiter, M. (2019) Structural controls on polyphase hydrothermal dolomitization in the Kinta Valley, Malaysia: Paragenesis and regional tectono-magmatism. Journal of Asian Earth Sciences.

Rodriguez-Aguilar, R. and Marmolejo-Saucedo, J.A. and Vasant, P. (2019) Machine Learning Applied to the Measurement of Quality in Health Services in Mexico: The Case of the Social Protection in Health System. Advances in Intelligent Systems and Computing, 866. pp. 560-572.

Rehman, Wajid Ur and Merican, Zulkifli Merican Aljunid and Bhat, Aamir Hussian and Hoe, Beh Guan and Sulaimon, Aliyu Adebayo and Akbarzadeh, Omid and Khan, Muhammad Saad and Mukhtar, Ahmad and Saqib, Sidra and Hameed, Ayesha and others (2019) Synthesis, characterization, stability and thermal conductivity of multi-walled carbon nanotubes (MWCNTs) and eco-friendly jatropha seed oil based nanofluid: An experimental investigation and modeling approach. Journal of Molecular Liquids, 293. p. 111534.

Rashid, A.S.A. and Shirazi, M.G. and Nazir, R. and Mohamad, H. and Sahdi, F. and Horpibulsuk, S. (2019) Bearing capacity performance of soft cohesive soil treated by kenaf limited life geotextile. Marine Georesources and Geotechnology.

Rahim, A.R.A. and Rabat, N.E. and Johari, K. and Saman, N. and Mat, H. (2019) Removal of lead (II) ions from aqueous solution using desiccated coconut waste as low-cost adsorbent. Chemical Engineering Transactions, 72. pp. 169-174.

Rubab, S. and Taqvi, S.A. and Hassan, M.F. (2019) Realizing the value of big data in process monitoring and control: Current issues and opportunities. Advances in Intelligent Systems and Computing, 843. pp. 128-138.

Rozali, N.E.M. and Cheong, J.S. and Alwi, S.R.W. and Ho, W.S. and Manan, Z.A. and KlemeÅ¡, J.J. (2019) Integration of diesel plant into hybrid power system using numerical probabilistic approach. Chemical Engineering Transactions, 72. pp. 277-282.

Rashid, N.A. and Abdul Aziz, I. and Hasan, M.H.B. (2019) Machine failure prediction technique using recurrent neural network long short-term memory-particle swarm optimization algorithm. Advances in Intelligent Systems and Computing, 985. pp. 243-252.

Rashid, Z. and Wilfred, C.D. and Gnanasundaram, N. and Arunagiri, A. and Murugesan, T. (2019) A comprehensive review on the recent advances on the petroleum asphaltene aggregation. Journal of Petroleum Science and Engineering, 176. pp. 249-268.

Rosli, S.-S. and Lim, J.-W. and Jumbri, K. and Lam, M.-K. and Uemura, Y. and Ho, C.-D. and Tan, W.-N. and Cheng, C.-K. and Kadir, W.-N.-A. (2019) Modeling to enhance attached microalgal biomass growth onto fluidized beds packed in nutrients-rich wastewater whilst simultaneously biofixing CO 2 into lipid for biodiesel production. Energy Conversion and Management, 185. pp. 1-10.

Rani, S. and Padmanabhan, E. and Prusty, B.K. (2019) Review of gas adsorption in shales for enhanced methane recovery and CO 2 storage. Journal of Petroleum Science and Engineering. pp. 634-643.

Rankey, E.C. and Schlaich, M. and Mokhtar, S. and Ghon, G. and Ali, S.H. and Poppelreiter, M. (2019) Seismic architecture of a Miocene isolated carbonate platform and associated off-platform strata (Central Luconia Province, offshore Malaysia). Marine and Petroleum Geology, 102. pp. 477-495.

Rezk, H. and Nassef, A.M. and Inayat, A. and Sayed, E.T. and Shahbaz, M. and Olabi, A.G. (2019) Improving the environmental impact of palm kernel shell through maximizing its production of hydrogen and syngas using advanced artificial intelligence. Science of the Total Environment, 658. pp. 1150-1160.

Raj, J.J. and Magaret, S. and Pranesh, M. and Lethesh, K.C. and Devi, W.C. and Mutalib, M.I.A. (2019) Dual functionalized imidazolium ionic liquids as a green solvent for extractive desulfurization of fuel oil: Toxicology and mechanistic studies. Journal of Cleaner Production, 213. pp. 989-998.

Ramli, N.H. and Yusup, S. and Quitain, A.T. and Johari, K. and Kueh, B.W.B. (2019) Optimization of saponin extracts using microwave-assisted extraction as a sustainable biopesticide to reduce Pomacea canaliculata population in paddy cultivation. Sustainable Chemistry and Pharmacy, 11. pp. 23-35.

Reddy, A.V.B. and Moniruzzaman, M. and Aminabhavi, T.M. (2019) Polychlorinated biphenyls (PCBs) in the environment: Recent updates on sampling, pretreatment, cleanup technologies and their analysis. Chemical Engineering Journal, 358. pp. 1186-1207.

Rehan, M. and Hasbullah, H. and Faye, I. and Rehan, W. and Chughtai, O. and Rehmani, M.H. (2019) Correction to: ZGLS: a novel flat quorum-based and reliable location management protocol for VANETs (Wireless Netw, (2018), 24, (1885â��1903), 10.1007/s11276-016-1443-4). Wireless Networks, 25 (2). p. 915.

Raja Shahrom, M.S. and Wilfred, C.D. and MacFarlane, D.R. and Vijayraghavan, R. and Chong, F.K. (2019) Amino acid based poly(ionic liquid) materials for CO2 capture: Effect of anion. Journal of Molecular Liquids, 276. pp. 644-652.

Rafeek, M.R. and Rabat, N.E. and Yahya, W.Z.N. and Ghani, M.A. (2019) Adsorption and Desorption of Nickel (II) Ion by Oil Palm Empty Fruit Bunch grafted Polyvinyl Alcohol Hydrogel. Chemical Engineering Transactions, 72. pp. 175-180.

Rais, H.M. and Abed, S.A. and Watada, J. (2019) Computational comparison of major proposed methods for graph partitioning problem. Journal of Advanced Computational Intelligence and Intelligent Informatics. pp. 5-17.

Rehman, M. and Nallagownden, P. and Baharudin, Z. (2019) Efficiency investigation of SS and SP compensation topologies for wireless power transfer. International Journal of Power Electronics and Drive Systems, 10 (4). pp. 2157-2164.

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2019) Analysis of magnetohydrodynamic partial slip laser bump texture slider and journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 233 (12). pp. 1921-1938.

Riaz, S. and Mushtaq, A. (2019) A pedagogical evaluation of knowledge acquisition by social media users. International Journal of Innovative Technology and Exploring Engineering, 8 (8). pp. 1156-1163.

Rawindran, H. and Lim, J.-W. and Goh, P.-S. and Subramaniam, M.N. and Ismail, A.F. and Radi bin Nik M Daud, N.M. and Rezaei-Dasht Arzhandi, M. (2019) Simultaneous separation and degradation of surfactants laden in produced water using PVDF/TiO 2 photocatalytic membrane. Journal of Cleaner Production, 221. pp. 490-501.

Rashtchi, M. and bin Abu Bakar, Z. (2019) Written corrective feedback: What do Malaysian learners prefer and why? International Journal of Engineering and Advanced Technology, 8 (5). p. 1221.

Radzi, S.S.M. and Asirvadam, V.S. and Yusoff, M.Z. (2019) Fractal dimension and power spectrum of electroencephalography signals of sleep inertia state. IEEE Access, 7. pp. 185879-185892.

Rozaini, M.N.H. and Saad, B. and Ramachandran, M.R. and Kadir, E.A. (2019) Advanced materials as adsorbents in microextractions for the determination of contaminants: A mini review. International Journal of Technology, 10 (6). pp. 1157-1165.

Radzi, I.F. and Nik Ali, N.H. and Rameli, N. and Mohd Ariffin, A. and Abd Rahman, M.S. and Ahmad, M.R. and Salleh, A.S. (2019) Partial discharge detection device using ultrasonic sensor on medium voltage XLPE cable. Indonesian Journal of Electrical Engineering and Computer Science, 17 (2). pp. 886-894.

Radzi, S.S.M. and Asirvadam, V.S. and Yusoff, M.Z. (2019) Fractal dimension and power spectrum of electroencephalography signals of sleep inertia state. IEEE Access, 7. pp. 185879-185892.

Rocky, Kaiser Ahmed and Pal, Animesh and Moniruzzaman, Muhammad and Saha, Bidyut Baran (2019) Adsorption characteristics and thermodynamic property fields of polymerized ionic liquid and polyvinyl alcohol based composite/CO2 pairs. Journal of Molecular Liquids, 294. p. 111555.

Reddy, A Vijaya Bhaskar and Moniruzzaman, M and Aminabhavi, Tejraj M (2019) Polychlorinated biphenyls (PCBs) in the environment: Recent updates on sampling, pretreatment, cleanup technologies and their analysis. Chemical Engineering Journal, 358. pp. 1186-1207.

Rasheed, Waqas and Tang, Tong Boon (2019) Anomaly detection of moderate traumatic brain injury using auto-regularized multi-instance one-class SVM. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 28 (1). pp. 83-93.

S

Shad, M.K. and Lai, Fong Woon and Fatt, C.L. and Klemes, J. J. and Bokhari, Awais (2019) Integrating sustainability reporting into enterprise risk management and its relationship with business performance: A conceptual framework. Journal of Cleaner Production, 208. pp. 415-425.

Saad , Nordin and Ibrahim, Rosdiazli (2019) Analysis of distributed faults in inner and outer race of bearing via Park vector analysis method. NEURAL COMPUTING & APPLICATIONS, 31. ISSN 0941-0643

Shahid, Muhammad Zubair and Maulud, Abdulhalim Shah and Bustam, M Azmi and Suleman, Humbul and Halim, Hairul Nazirah Abdul and Shariff, Azmi M (2019) Rate-Based Modeling for Packed Absorption Column of the MEA--COâ��--Water System at High-Pressure and High-COâ�� Loading Conditions.

Shafiq, Umar and Shariff, Azmi M and Babar, Muhammad and Azeem, Babar and Ali, Abulhassan and Bustam, Azmi (2019) Solid Study Blowdown Distillation of CO of Process 2 Cryogenic Formation CO2 During--CH4. Advances in Material Sciences and Engineering. p. 23.

Shaikh, Muhammad Shuaib and Shariff, AM and Bustam, MA and Garg, Sahil and Qureshi, Khadija and Shaikh, Pervez Hameed and Bhatti, Inamullah (2019) Experimental studies and artificial neural network modeling of surface tension of aqueous sodium L-prolinate solutions and piperazine blends. Chinese Journal of Chemical Engineering, 27 (8). pp. 1904-1911.

Salvinder, KMS and Zabiri, Haslinda and Taqvi, Syed A and Ramasamy, M and Isa, F and Rozali, NEM and Suleman, H and Maulud, A and Shariff, AM (2019) An overview on control strategies for CO2 capture using absorption/stripping system. Chemical Engineering Research and Design, 147. pp. 319-337.

Syalsabila, Afaf and Maulud, Abdulhalim Shah and Suleman, Humbul and Hadi Md Nordin, Nik Abdul (2019) VLE of carbon dioxide-loaded aqueous potassium salt of L-histidine solutions as a green solvent for carbon dioxide capture: experimental data and modelling. International Journal of Chemical Engineering, 2019.

Syalsabila, Afaf and Maulud, Abdulhalim Shah and Suleman, Humbul and Md Nordin, Nik Abdul Hadi (2019) Corrigendum to â��VLE of Carbon Dioxide-Loaded Aqueous Potassium Salt of L-Histidine Solutions as a Green Solvent for Carbon Dioxide Capture: Experimental Data and Modellingâ��. International Journal of Chemical Engineering, 2019.

Shahid, Muhammad Zubair and Maulud, Abdulhalim Shah and Bustam, M Azmi and Suleman, Humbul and Halim, Hairul Nazirah Abdul and Shariff, Azmi M (2019) Rate-based modeling for packed absorption column of the MEA--CO2--water system at high-pressure and High-CO2 loading conditions. Industrial & Engineering Chemistry Research, 58 (27). pp. 12235-12246.

Sychov, A. and Kharchenko, V. and Vasant, P. and Uzakov, G. (2019) Application of Various Computer Tools for the Optimization of the Heat Pump Heating Systems with Extraction of Low-Grade Heat from Surface Watercourses. Advances in Intelligent Systems and Computing, 866. pp. 310-319.

Sundararajan, V. and Saidi, N.M. and Ramesh, S. and Ramesh, K. and Selvaraj, G. and Wilfred, C.D. (2019) Quasi solid-state dye-sensitized solar cell with P(MMA-co-MAA)-based polymer electrolytes. Journal of Solid State Electrochemistry.

Sivapragasam, M. and Jaganathan, J.R. and LevÃªque, J.-M. and Moniruzzaman, M. and Abdul Mutalib, M.I. (2019) Microbial biocompatibility of phosphonium- and ammonium-based ionic liquids. Journal of Molecular Liquids, 273. pp. 107-115.

Sajid, Muhammad and Ayoub, Muhammad and Uemura, Yoshimitsu and Yusup, Suzana and Saleem, Mahmood and Abdullah, Bawadi and Khan, Asad U (2019) Comparative study of glycerol conversion to polyglycerol via conventional and microwave irradiation reactor. Materials Today: Proceedings, 16. pp. 2101-2107.

Sabet, M. and Soleimani, H. and Mohammadian, E. (2019) Effect of Graphene and Carbon Nanotube on Low-Density Polyethylene Nanocomposites. Journal of Vinyl and Additive Technology, 25 (1). pp. 35-40.

Shehzad, N. and Tahir, M. and Johari, K. and Murugesan, T. and Hussain, M. (2019) Fabrication of highly efficient and stable indirect Z-scheme assembly of AgBr/TiO 2 via graphene as a solid-state electron mediator for visible light induced enhanced photocatalytic H 2 production. Applied Surface Science, 463. pp. 445-455.

Sufian, Suriati (2019) The microstructural and mechanical properties of glass fiber reinforced geopolymer composites. Malaysian Journal of Microscopy, 15 (1).

Samsudin, Mohamad Fakhrul Ridhwan and Jayabalan, Prasenna John and Ong, Wee-Jun and Ng, Yun Hau and Sufian, Suriati (2019) Photocatalytic degradation of real industrial poultry wastewater via platinum decorated BiVO4/g-C3N4 photocatalyst under solar light irradiation. Journal of Photochemistry and Photobiology A: Chemistry, 378. pp. 46-56.

Sikander, Umair and Samsudin, Mohamad Fakhrul and Sufian, Suriati and KuShaari, KuZilati and Kait, Chong Fai and Naqvi, Salman Raza and Chen, Wei-Hsin (2019) Tailored hydrotalcite-based Mg-Ni-Al catalyst for hydrogen production via methane decomposition: Effect of nickel concentration and spinel-like structures. International Journal of Hydrogen Energy, 44 (28). pp. 14424-14433.

Samsudin, Mohamad Fakhrul Ridhwan and Bacho, Nurfatien and Sufian, Suriati and Ng, Yun Hau (2019) Photocatalytic degradation of phenol wastewater over Z-scheme g-C3N4/CNT/BiVO4 heterostructure photocatalyst under solar light irradiation. Journal of Molecular Liquids, 277. pp. 977-988.

Shah, S.M.H. and Mustaffa, Z. and Martinez-Gomariz, E. and Kim, D.K. and Yusof, K.W. (2019) Criterion of vehicle instability in floodwaters: past, present and future. International Journal of River Basin Management.

Salman, H.M. and Wan Ahmad, W.F. and Sulaiman, S. (2019) Heuristic evaluation of the smartphone applications in supporting elderly. Advances in Intelligent Systems and Computing, 843. pp. 781-790.

Shukla, S. and Hassan, M.F. and Jung, L.T. and Awang, A. (2019) Architecture for latency reduction in healthcare internet-of-things using reinforcement learning and fuzzy based fog computing. Advances in Intelligent Systems and Computing, 843. pp. 372-383.

Sulaiman, S.A. (2019) Strategy for cooling of computing data center facilities. SpringerBriefs in Applied Sciences and Technology. pp. 73-84.

Shah, M.U.H. and Moniruzzaman, M. and Sivapragasam, M. and Talukder, M.M.R. and Yusup, S.B. and Goto, M. (2019) A binary mixture of a biosurfactant and an ionic liquid surfactant as a green dispersant for oil spill remediation. Journal of Molecular Liquids, 280. pp. 111-119.

Safdar, R. and Gnanasundaram, N. and Iyyasami, R. and Appusamy, A. and Papadimitriou, S. and Thanabalan, M. (2019) Preparation, characterization and stability evaluation of ionic liquid blended chitosan tripolyphosphate microparticles. Journal of Drug Delivery Science and Technology, 50. pp. 217-225.

Samsudin, M.F.R. and Bacho, N. and Sufian, S. and Ng, Y.H. (2019) Photocatalytic degradation of phenol wastewater over Z-scheme g-C 3 N 4 /CNT/BiVO 4 heterostructure photocatalyst under solar light irradiation. Journal of Molecular Liquids, 277. pp. 977-988.

Shabib-Asl, A. and Ayoub, M.A. and Elraies, K.A. (2019) A new hybrid technique using low salinity water injection and foam flooding for enhanced oil recovery in sandstone rock. Journal of Petroleum Science and Engineering. pp. 716-728.

Sazhin, S.S. and Rybdylova, O. and Crua, C. and Heikal, M. and Ismael, M.A. and Nissar, Z. and Aziz, A.R.B.A. (2019) A simple model for puffing/micro-explosions in water-fuel emulsion droplets. International Journal of Heat and Mass Transfer. pp. 815-821.

Shahbaz, M. and Taqvi, S.A. and Minh Loy, A.C. and Inayat, A. and Uddin, F. and Bokhari, A. and Naqvi, S.R. (2019) Artificial neural network approach for the steam gasification of palm oil waste using bottom ash and CaO. Renewable Energy, 132. pp. 243-254.

Shukrullah, S. and Naz, M.Y. and Mohamed, N.M. and Ibrahim, K.A. and Ghaffar, A. and AbdEl-Salam, N.M. (2019) Production of bundled CNTs by floating a compound catalyst in an atmospheric pressure horizontal CVD reactor. Results in Physics, 12. pp. 1163-1171.

Shah, Z. and Dawar, A. and Khan, I. and Islam, S. and Ching, D.L.C. and Khan, A.Z. (2019) Cattaneo-Christov model for electrical magnetite micropoler Casson ferrofluid over a stretching/shrinking sheet using effective thermal conductivity model. Case Studies in Thermal Engineering, 13.

Sadrolhosseini, A.R. and Abdul Rashid, S. and Shafie, S. and Soleimani, H. (2019) Laser ablation synthesis of Ag nanoparticles in graphene quantum dots aqueous solution and optical properties of nanocomposite. Applied Physics A: Materials Science and Processing, 125 (2).

Safdar, R. and Omar, A.A. and Arunagiri, A. and Regupathi, I. and Thanabalan, M. (2019) Potential of Chitosan and its derivatives for controlled drug release applications â�� A review. Journal of Drug Delivery Science and Technology, 49. pp. 642-659.

Sarwono, A. and Man, Z. and Idris, A. and Khan, A.S. and Muhammad, N. and Wilfred, C.D. (2019) Optimization of ionic liquid assisted sugar conversion and nanofiltration membrane separation for 5-hydroxymethylfurfural. Journal of Industrial and Engineering Chemistry, 69. pp. 171-178.

Shad, M.K. and Lai, F.-W. and Fatt, C.L. and KlemeÅ¡, J.J. and Bokhari, A. (2019) Integrating sustainability reporting into enterprise risk management and its relationship with business performance: A conceptual framework. Journal of Cleaner Production, 208. pp. 415-425.

Sulaiman, S.A. (2019) Strategy for cooling of computing data center facilities. SpringerBriefs in Applied Sciences and Technology. pp. 73-84.

Sulaiman, S.A. (2019) Preface. SpringerBriefs in Applied Sciences and Technology. v.

Sulaiman, S. (2019) Preface. SpringerBriefs in Applied Sciences and Technology. V.

Salman, H.M. and Wan Ahmad, W.F. and Sulaiman, S. (2019) Heuristic evaluation of the smartphone applications in supporting elderly. Advances in Intelligent Systems and Computing, 843. pp. 781-790.

Sulaiman, S.A. (2019) Strategy for cooling of computing data center facilities. SpringerBriefs in Applied Sciences and Technology. pp. 73-84.

Soomro, I.A. and Pedapati, S.R. (2019) Application of in situ post weld heat treatment using double pulse technology and its effect on microstructure and mechanical performance of resistance spot welded HSLA350 steel. International Journal of Advanced Manufacturing Technology, 105 (7-8). pp. 3249-3260.

Singh, G. and Ismail, I.S. and Bilen, C. and Shanbhag, D. and Sathish, C.I. and Ramadass, K. and Vinu, A. (2019) A facile synthesis of activated porous carbon spheres from D-glucose using a non-corrosive activating agent for efficient carbon dioxide capture. Applied Energy, 255.

Sabet, M. and Soleimani, H. (2019) The research design of graphene inclusion on LDPE characterization. International Journal of Mechanical and Materials Engineering, 14 (1).

Shamim, M.Y. and Buang, A. and Anjum, H. and Khan, M.I. and Athar, M. (2019) Development and quantitative evaluation of leading and lagging metrics of emergency planning and response element for sustainable process safety performance. Journal of Loss Prevention in the Process Industries, 62.

Saleem, N. and Khattak, M.I. and Witjaksono, G. and Ahmad, G. (2019) Variance based time-frequency mask estimation for unsupervised speech enhancement. Multimedia Tools and Applications, 78 (22). pp. 31867-31891.

Saeidi, T. and Ismail, I. and Wen, W.P. and Alhawari, A.R.H. (2019) Ultra-wideband elliptical patch antenna for microwave imaging of wood. International Journal of Microwave and Wireless Technologies, 11 (9). pp. 948-966.

Silitonga, A.S. and Mahlia, T.M.I. and Shamsuddin, A.H. and Ong, H.C. and Milano, J. and Kusumo, F. and Sebayang, A.H. and Dharma, S. and Ibrahim, H. and Husin, H. and Mofijur, M. and Rahman, S.M.A. (2019) Optimization of cerbera manghas biodiesel production using artificial neural networks integrated with ant colony optimization. Energies, 12 (20).

Suhaimy, A.M.B. and Anwar, T. (2019) Intelligent healthcare on hydrocephalus management using artificial neural network algorithm. International Journal of Engineering and Advanced Technology, 9 (1). pp. 6108-6115.

Singh, G. and Ramadass, K. and Lee, J.M. and Ismail, I.S. and Singh, M. and Bansal, V. and Yang, J.-H. and Vinu, A. (2019) Convenient design of porous and heteroatom self-doped carbons for CO2 capture. Microporous and Mesoporous Materials, 287. pp. 1-8.

Subhani, N. and Kannan, R. and Mahmud, M.A. and Roy, T.K. and Romlie, M.F. (2019) Analysis of steady-state characteristics for a newly designed high voltage gain switched inductor Z-source inverter. Electronics (Switzerland), 8 (9).

Shah, S.M.H. and Mustaffa, Z. and MatÃnez-Gomariz, E. and Yusof, K.W. and Al-Qadami, E.H.H. (2019) Hazard risks pertaining to partially submerged non-stationary vehicle on low-lying roadways under subcritical flows. Results in Engineering, 3.

Siyal, A.A. and Shamsuddin, M.R. and Rabat, N.E. and Zulfiqar, M. and Man, Z. and Low, A. (2019) Fly ash based geopolymer for the adsorption of anionic surfactant from aqueous solution. Journal of Cleaner Production, 229. pp. 232-243.

Shahid, M.Z. and Maulud, A.S. and Bustam, M.A. and Suleman, H. and Halim, H.N.A. and Shariff, A.M. (2019) Rate-Based Modeling for Packed Absorption Column of the MEA-CO2-Water System at High-Pressure and High-CO2 Loading Conditions. Industrial and Engineering Chemistry Research, 58 (27). pp. 12235-12246.

Sambas, N.F.B. and Baloo, L. and Mustaffa, A.P.Z. (2019) Rainwater harvesting with subsequent first flush: Water quality performance for non-potable purpose. International Journal of Recent Technology and Engineering, 8 (2 Spec). pp. 76-79.

Shah, S.Z.H. and Karuppanan, S. and Megat-Yusoff, P.S.M. and Sajid, Z. (2019) Impact resistance and damage tolerance of fiber reinforced composites: A review. Composite Structures, 217. pp. 100-121.

Sabet, M. and Soleimani, H. (2019) Effect of graphene on mechanical and flowability properties of low-density polyethylene composites. Materials Performance and Characterization, 8 (3).

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Bashiri, R. and Shamsudin, A.E. and Zaine, S.N.A. (2019) Few-layer graphene supported polyaniline (PANI) film as a transparent counter electrode for dye-sensitized solar cells. Diamond and Related Materials, 94. pp. 242-251.

Subhani, N. and Kannan, R. and Mahmud, A. and Romlie, M.F. (2019) Performance analysis of a modernized Z-source inverter for robust boost control in photovoltaic power conditioning systems. Electronics (Switzerland), 8 (2).

Sarveen, M. and Parthiban, S. and Nur Anisah, S. and Surej Kumar, S. and Babar, A. (2019) Exploring the potential application of palm methyl ester sulfonate as an interfacial tension reducing surfactant for chemical enhanced oil recovery. Key Engineering Materials, 797. pp. 402-410.

Subramanian, K. and Othman, M. and Sokkalingam, R. and Thangarasu, G. (2019) Advanced decision support system for postoperative care unit using artificial neural networks. Journal of Advanced Research in Dynamical and Control Systems, 11 (10 Spe). pp. 1116-1122.

Shah, S.A.A. and Shahzad, A. and Khan, M.A. and Lu, C.-K. and Tang, T.B. (2019) Unsupervised Method for Retinal Vessel Segmentation Based on Gabor Wavelet and Multiscale Line Detector. IEEE Access, 7. pp. 167221-167228.

Sarmah, S. and Gogoi, S.B. and Jagatheesan, K. and Hazarika, K. (2019) Formulation of a combined low saline water and polymer flooding for enhanced oil recovery. International Journal of Ambient Energy.

Saieed, A. and Memon, Z.Q. and Tran, M.C. and Soon, W.P.K. (2019) A multiphase flow loop design for investigating the partial phase separation in a pipe tee. Acta Polytechnica, 59 (4). pp. 399-410.

Subashini, M.M. and Deshpande, A. and Kannan, R. (2019) Study and implementation of various image de-noising methods for traffic sign board recognition. Advances in Science, Technology and Engineering Systems, 4 (4). pp. 545-560.

Setvati, M.R. and Mustaffa, Z. (2019) Rehabilitation of corroded circular hollow sectional steel beam by CFRP patch. Steel and Composite Structures, 32 (1). pp. 127-139.

Shah, S.M.H. and Mustaffa, Z. and Yusof, K.W. (2019) Numerical framework to determine instability modes for static vehicles under partial submergence. International Journal of Integrated Engineering, 11 (2). pp. 186-194.

Saeidi, T. and Ismail, I. and Wen, W.P. and Alhawari, A.R.H. and Mohammadi, A. (2019) Ultra-wideband antennas for wireless communication applications. International Journal of Antennas and Propagation, 2019.

Salman, H.M. and Wan Ahmad, W.F. and Sulaiman, S. (2019) Usability evaluation of smartphone gestures in supporting elderly users. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 11870 . pp. 672-683.

Sadrolhosseini, A.R. and Habibiasr, M. and Shafie, S. and Solaimani, H. and Lim, H.N. (2019) Optical and thermal properties of laser-ablated platinum nanoparticles graphene oxide composite. International Journal of Molecular Sciences, 20 (24).

Surajudeen, S. and Yahya, N. and Soleimani, H. and Musa, A.A. and Afeez, Y. and Rostami, A. (2019) Effect of adsorption on saturated sandstone within electric double layer on solid/liquid inter-phase. Petroleum and Coal, 61 (6). pp. 1438-1444.

Sahith, SJ Ai Krishna and Pedapati, Srinivasa Rao and Lal, Bhajan (2019) Application of artificial neural networks on measurement of gas hydrates in pipelines. Test Eng. Manag, 81. pp. 5769-5774.

Saritha, Duddukuru and Gupta, Vinod Kumar and Reddy, Ambavaram Vijaya Bhaskar and Agarwal, Shilpi and Moniruzzaman, Muhammad and Anitha, Kowthalam and Madhavi, Gajulapalle (2019) Development of a simple, selective, stable and ultrasensitive poly (safranine/nano NiO) modified carbon paste electrode for selective detection of rutin in buckwheat and green tea samples. Int. J. Electrochem. Sci, 14. pp. 10093-10110.

Shakeel, Ahmad and Mahmood, Hamayoun and Farooq, Ujala and Ullah, Zahoor and Yasin, Saima and Iqbal, Tanveer and Chassagne, Claire and Moniruzzaman, Muhammad (2019) Rheology of pure ionic liquids and their complex fluids: A review. ACS Sustainable Chemistry & Engineering, 7 (16). pp. 13586-13626.

Shah, Mansoor Ul Hassan and Moniruzzaman, Muhammad and Sivapragasam, Magaret and Talukder, Md Mahabubur Rahman and Yusup, Suzana Bt and Goto, Masahiro (2019) A binary mixture of a biosurfactant and an ionic liquid surfactant as a green dispersant for oil spill remediation. Journal of Molecular liquids, 280. pp. 111-119.

Shah, Mansoor Ul Hassan and Moniruzzaman, Muhammad and Talukder, Md Mahabubur Rahman and Yusup, Suzana Bt (2019) Antimicrobial activity and acute toxicity of choline based ionic liquid mixtures. Materials Today: Proceedings, 19. pp. 1309-1314.

Sivapragasam, Magaret and Jaganathan, Joshua Raj and Levêque, Jean-Marc and Moniruzzaman, Muhammad and Mutalib, MI Abdul (2019) Microbial biocompatibility of phosphonium-and ammonium-based ionic liquids. Journal of Molecular Liquids, 273. pp. 107-115.

Shah, Syed Ayaz Ali and Shahzad, Aamir and Khan, Muhammad Amir and Lu, Cheng-Kai and Tang, Tong Boon (2019) Unsupervised method for retinal vessel segmentation based on gabor wavelet and multiscale line detector. IEEE Access, 7. pp. 167221-167228.

Sutoko, Stephanie and Chan, Yee Ling and Obata, Akiko and Sato, Hiroki and Maki, Atsushi and Numata, Takashi and Funane, Tsukasa and Atsumori, Hirokazu and Kiguchi, Masashi and Tang, Tong Boon and others (2019) Denoising of neuronal signal from mixed systemic low-frequency oscillation using peripheral measurement as noise regressor in near-infrared imaging. Neurophotonics, 6 (1). 015001-015001.

T

Tay, WH and Lau, KK and Lai, LS and Shariff, AM and Wang, T (2019) Current development and challenges in the intensified absorption technology for natural gas purification at offshore condition. Journal of Natural Gas Science and Engineering, 71. p. 102977.

Tiong, Laura and Komiyama, Masaharu (2019) Supercritical water gasification of microalga Chlorella vulgaris over supported Ru. The Journal of Supercritical Fluids, 144. pp. 1-7.

Tariq, Adeel and Altaf, Khurram and Rani, Ahmad Majdi Abdul and Baharom, Masri and others (2019) Study of Heat Transfer Attributes of Custom Fins for CrankRocker Engine Block using ANSYS. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (2). pp. 235-243.

Tan, Grace Ying En and Oh, Pei Ching and Lau, Kok Keong and Low, Siew Chun (2019) A comparative study to evaluate the role of caged hybrid frameworks in the precise dispersion of titanium (IV) oxide for the development of gas separation membranes. Comptes Rendus Chimie, 22 (11-12). pp. 745-754.

Tan, Grace Ying En and Oh, Pei Ching and Lau, Kok Keong and Low, Siew Chun (2019) Dispersion of Titanium (IV) Oxide Nanoparticles in Mixed Matrix Membrane Using Octaisobutyl Polyhedral Oligomeric Silsesquioxane for Enhanced CO 2/CH 4 Separation Performance. Chinese Journal of Polymer Science, 37. pp. 654-663.

Torres-Escobar, R. and Marmolejo-Saucedo, J.A. and Litvinchev, I. and Vasant, P. (2019) Monkey Algorithm for Packing Circles with Binary Variables. Advances in Intelligent Systems and Computing, 866. pp. 547-559.

Tareq, M. and Abed, S.A. and Sundararajan, E.A. (2019) Artificial Bee Colony for Minimizing the Energy Consumption in Mobile Ad Hoc Network. Green Energy and Technology. pp. 21-38.

Thangarasu, G. and Dominic, P.D.D. and Subramanian, K. and Smiley, S. (2019) Biometric based signature authentication scheme for cloud healthcare data security. Advances in Intelligent Systems and Computing, 843. pp. 557-565.

Tiong, L. and Komiyama, M. (2019) Supercritical water gasification of microalga Chlorella vulgaris over supported Ru. Journal of Supercritical Fluids, 144. pp. 1-7.

Tareq, M. and Abed, S.A. and Sundararajan, E.A. (2019) Artificial Bee Colony for Minimizing the Energy Consumption in Mobile Ad Hoc Network. Green Energy and Technology. pp. 21-38.

Tasmin, R. and Muazu, M.H. and Woon, L.F. and Takala, J. (2019) Integrated operations another tool for achieving operational excellence in the oil and gas sector. International Journal of Engineering and Advanced Technology, 9 (1). pp. 2288-2294.

Tran, N.T.T. and Trinh, T.H. and Uemura, Y. and Ramli, A. (2019) A kinetic experiment of vapor phase hydrodeoxygenation of a bio-oil model compound over PdFe/Al-MCM-41 catalyst. International Journal of Recent Technology and Engineering, 8 (2 Spec). pp. 597-601.

Ting, T.M. and Nasef, M.M. and Ee Ling, A.W. (2019) Kinetics of radiation grafting of glycidyl methacrylate and vinylbenzyl chloride onto polymer fibers. Journal of Engineering Science and Technology, 14 (2). pp. 646-658.

Tayeh, B.A. and Hamad, R.J.A. and Alaloul, W.S. and Almanassra, M. (2019) Factors affecting defects occurrence in structural design stage of residential buildings in gaza strip. Open Civil Engineering Journal, 13 (1). pp. 129-139.

Tareq, M. and Abed, S.A. and Sundararajan, E.A. (2019) Artificial Bee Colony for Minimizing the Energy Consumption in Mobile Ad Hoc Network. Green Energy and Technology. pp. 21-38.

Tayeh, B.A. and Alaloul, W.S. and Muhaisen, W.B. (2019) Challenges facing small-sized construction firms in the gaza strip. Open Civil Engineering Journal, 13 (1). pp. 51-57.

Thangarasu, G. and Subramanian, K. (2019) Big data analytics for improved care delivery in the healthcare industry. International journal of online and biomedical engineering, 15 (10). pp. 40-51.

Termida, N.A. and Rohani, M.M. and Daniel, B.D. and Omar, N. and Dharmowijoyo, D.B.E. (2019) Behavioural observations of adult-child pairs at a Pelican crossing: A case study in Kuala Lumpur. International Journal of Integrated Engineering, 11 (2). pp. 249-259.

Toh, Moau Jian and Oh, Pei Ching and Ahmad, Abdul Latif and Caille, Julien (2019) Enhancing membrane wetting resistance through superhydrophobic modification by polydimethylsilane-grafted-SiO 2 nanoparticles. Korean Journal of Chemical Engineering, 36. pp. 1854-1858.

Toh, Moau Jian and Oh, Pei Ching and Chew, Thiam Leng and Ahmad, Abdul Latif (2019) Antiwettability enhancement of PVDF-HFP membrane via superhydrophobic modification by SiO2 nanoparticles. Comptes Rendus Chimie, 22 (5). pp. 369-372.

U

Ullah, Sami and Suleman, Humbul and Tahir, Muhammad Suleman and Sagir, Muhammad and Muhammad, Shabbir and Al-Sehemi, Abdullah G and Zafar, Masood-ur-Rauf and Kareem, Firas A Abdul and Maulud, Abdulhalim Shah and Bustam, Mohamad Azmi (2019) Reactive kinetics of carbon dioxide loaded aqueous blend of 2-amino-2-ethyl-1, 3-propanediol and piperazine using a pressure drop method. International Journal of Chemical Kinetics, 51 (4). pp. 291-298.

Usman, F. and Dennis, J.O. and Ahmed, A.Y. and Meriaudeau, F. and Ayodele, O.B. and Rabih, A.A.S. (2019) A Review of Biosensors for Non-Invasive Diabetes Monitoring and Screening in Human Exhaled Breath. IEEE Access, 7. pp. 5963-5974.

Ullah, S. and Suleman, H. and Tahir, M.S. and Sagir, M. and Muhammad, S. and Al-Sehemi, A.G. and Zafar, M.-U.-R. and Kareem, F.A.A. and Maulud, A.S. and Bustam, M.A. (2019) Reactive kinetics of carbon dioxide loaded aqueous blend of 2-amino-2-ethyl-1,3-propanediol and piperazine using a pressure drop method. International Journal of Chemical Kinetics.

Ul Mustafa, M.R. and Sholagberu, A.T. and Syazwan, M.A. and Yusof, K.W. and Hashim, A.M. and Abdurrasheed, A.S. (2019) Land-use assessment and its influence on spatial distribution of rainfall erosivity: Case study of Cameron Highlands Malaysia. Journal of Ecological Engineering, 20 (2). pp. 183-190.

Umar, A.A. and Saaid, I.M. and Pilus, R.M. and Sulaimon, A.A. and Negash, B.M. and Abd Rahim, N.S. (2019) Investigation of combined effects of wax, calcites and clay on emulsion stability using response surface methodology. World Journal of Engineering, 16 (6). pp. 751-767.

Usman, A. and Izzaty, N. and Ibrahim, R. and Sutanto, M.H. and Sunarjono, S. (2019) Storage stability and morphology of latex modified bitumen. International Journal of Innovative Technology and Exploring Engineering, 9 (1). pp. 4435-4440.

Ullah, S. and Bustam, M.A. and Assiri, M.A. and Al-Sehemi, A.G. and Sagir, M. and Abdul Kareem, F.A. and Elkhalifah, A.E.I. and Mukhtar, A. and Gonfa, G. (2019) Synthesis, and characterization of metal-organic frameworks -177 for static and dynamic adsorption behavior of CO2 and CH4. Microporous and Mesoporous Materials, 288.

Uddin, M. and Romlie, M.F. and Abdullah, M.F. (2019) Performance assessment and economic analysis of a gas-fueled islanded microgrid - A Malaysian case study. Infrastructures, 4 (4).

Ullah, Z. and Man, Z. and Khan, A.S. and Muhammad, N. and Mahmood, H. and Ben Ghanem, O. and Ahmad, P. and Hassan Shah, M.-U. and Mamoon-Ur-Rashid and Raheel, M. (2019) Extraction of valuable chemicals from sustainable rice husk waste using ultrasonic assisted ionic liquids technology. Journal of Cleaner Production, 220. pp. 620-629.

Umar, A.A. and Zawawi, N.A.W.A. and Abdul-Aziz, A.-R. (2019) Exploratory factor analysis of skills requirement for PPP contract governance. Built Environment Project and Asset Management, 9 (2). pp. 277-290.

Usman, F. and Dennis, J.O. and Seong, K.C. and Ahmed, A.Y. and Ferrell, T.L. and Fen, Y.W. and Sadrolhosseini, A.R. and Ayodele, O.B. and Meriaudeau, F. and Saidu, A. (2019) Enhanced Sensitivity of Surface Plasmon Resonance Biosensor Functionalized with Doped Polyaniline Composites for the Detection of Low-Concentration Acetone Vapour. Journal of Sensors, 2019.

Umar, M.W. and Yahaya, N. and Baharudin, Z. (2019) State-space averaged modeling and transfer function derivation of DC-DC boost converter for high-brightness led lighting applications. Telkomnika (Telecommunication Computing Electronics and Control), 17 (2). pp. 1006-1013.

Ullah, H. and Wilfred, C.D. and Shaharun, M.S. (2019) Green synthesis of copper nanoparticle using ionic liquid-based extraction from Polygonum minus and their applications. Environmental Technology (United Kingdom), 40 (28). pp. 3705-3712.

Ung, Wei Chun and Yap, Kah Hui and Ebenezer, Esther Gunaseli M and Chin, Pui See and Nordin, Nadira and Chan, Sook Ching and Yip, Hung Loong and Lu, Cheng-Kai and Kiguchi, Masashi and Tang, Tong Boon (2019) Assessing neural compensation with visuospatial working memory load using near-infrared imaging. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 28 (1). pp. 13-22.

V

Vasant, P. and Weber, G.-W. and Zelinka, I. (2019) Preface. Advances in Intelligent Systems and Computing, 866. i-vi.

Vasant, P. and Litvinchev, I. and Marmolejo-Saucedo, J.A. (2019) Preface. EAI/Springer Innovations in Communication and Computing. v-vi.

Venu, M. and Reddy, Y.V.M. and Reddy, A.V.B. and Moniruzzaman, M. and Kusuma, H.S. and Madhavi, G. (2019) Development of a method for quantification of two genotoxic impurities in lurasidone using LC-MS/MS. Journal of Chemical Technology and Metallurgy, 54 (4). pp. 750-757.

Vasant, P. and Litvinchev, I. and Marmolejo-Saucedo, J.A. (2019) Preface. EAI/Springer Innovations in Communication and Computing. v-vi.

Venu, Manthrapudi and Reddy, Yenugu Veera Manohara and Reddy, Ambavaram Vijaya Bhaskar and Moniruzzaman, Mohammad and Kusuma, Heri Septya and Madhavi, Gajulapalli (2019) Development of a method for quantification of two genotoxic impurities in lurasidone using LC-MS/MS. Journal of Chemical Technology and Metallurgy, 54 (4). pp. 750-757.

Vijaya Bhaskar Reddy, A and Moniruzzaman, Muhammad and Saha, Bidyut Baran and Bakthavatchala Reddy, N and Zyryanov, Grigory V (2019) Synthesis, Characterization and CO2 Sorption Capacity Measurements of Selected Ionic Liquid Polymers. Ð¡Ð¾Ð²Ñ�ÐµÐ¼ÐµÐ½Ð½Ñ�Ðµ Ñ�Ð¸Ð½Ñ�ÐµÑ�Ð¸Ñ�ÐµÑ�ÐºÐ¸Ðµ Ð¼ÐµÑ�Ð¾Ð´Ð¾Ð»Ð¾Ð³Ð¸Ð¸ Ð´Ð»Ñ� Ñ�Ð¾Ð·Ð´Ð°Ð½Ð¸Ñ� Ð»ÐµÐºÐ°Ñ�Ñ�Ñ�Ð²ÐµÐ½Ð½Ñ�Ñ Ð¿Ñ�ÐµÐ¿Ð°Ñ�Ð°Ñ�Ð¾Ð² Ð¸ Ñ�Ñ�Ð½ÐºÑ�Ð¸Ð¾Ð½Ð°Ð»Ñ�Ð½Ñ�Ñ Ð¼Ð°Ñ�ÐµÑ�Ð¸Ð°Ð»Ð¾Ð² (MOSM2019).â��Ð�ÐºÐ°Ñ�ÐµÑ�Ð¸Ð½Ð±Ñ�Ñ�Ð³, 2019. p. 107.

W

Wang, C. and Lakshmipriya, T. and Gopinath, S.C.B. (2019) Amine-Aldehyde Chemical Conjugation on a Potassium Hydroxide-Treated Polystyrene ELISA Surface for Nanosensing an HIV-p24 Antigen. Nanoscale Research Letters, 14.

Wiryoatmojo, Amelia S and Mannan, Hafiz Abdul and Nasir, Rizwan and Mukhtar, Hilmi and Mohshim, Dzeti Farhah and Abdulrahman, Aymn and Man, Zakaria (2019) Surface modification effect of carbon molecular sieve (CMS) on the morphology and separation performance of mixed matrix membranes. Polymer Testing, 80. p. 106152.

Wang, L. and Gopinath, S.C.B. and Anbu, P. and Rajapaksha, R.D.A.A. and Velusamy, P. and Pandian, K. and Arshad, M.K.M. and Lakshmipriya, T. and Lee, C.-G. (2019) Photovoltaic and antimicrobial potentials of electrodeposited copper nanoparticle. Biochemical Engineering Journal. pp. 97-104.

Watada, J. and Roy, A. and Kadikar, R. and Pham, H. and Xu, B. (2019) Emerging Trends, Techniques and Open Issues of Containerization: A Review. IEEE Access, 7. pp. 152443-152472.

Waqas, S. and Bilad, M.R. (2019) A review on rotating biological contactors. Indonesian Journal of Science and Technology, 4 (2). pp. 241-256.

Wong, C.-Y. and Rosli, S.-S. and Uemura, Y. and Ho, Y.C. and Leejeerajumnean, A. and Kiatkittipong, W. and Cheng, C.-K. and Lam, M.-K. and Lim, J.-W. (2019) Potential protein and biodiesel sources from black soldier fly larvae: Insights of larval harvesting instar and fermented feeding medium. Energies, 12 (8).

WOLPERT, P.J. and POPPELREITER, M.C. (2019) Borehole-image-log characterization of deltaic deposits from a behind-outcrop well: Opportunities and limitations. Journal of Sedimentary Research, 89 (12). pp. 1207-1230.

Watada, J. and Roy, A. and Kadikar, R. and Pham, H. and Xu, B. (2019) Emerging Trends, Techniques and Open Issues of Containerization: A Review. IEEE Access, 7. pp. 152443-152472.

Y

Yusof, Siti Munirah Mhd and Lau, Kok Keong and Shariff, Azmi Mohd and Tay, Wee Horng and Mustafa, Nur Farhana Ajua and Lock, Serene Sow Mun (2019) Novel continuous ultrasonic contactor system for CO2 absorption: Parametric and optimization study. Journal of Industrial and Engineering Chemistry, 79. pp. 279-287.

Yaqub, Sana and bin Mohd Shariff, Azmi and Mellon, Nurhayati Bt and others (2019) Unraveling the effect of sub-cooling temperatures on the kinetic performance of biopolymers for methane hydrate. Journal of Natural Gas Science and Engineering, 65. pp. 68-81.

Yaqub, Sana and Keong, Lau Kok and others (2019) Thermodynamic and kinetic effect of biodegradable polymers on carbondioxide hydrates. Journal of Industrial and Engineering Chemistry, 79. pp. 131-145.

Yaqub, M.W. and Pendyala, R. and Rusli, R. (2019) Oil-water phase inversion in the horizontal section of upstream 90Â° bend during gas-oil-water three-phase flow. Key Engineering Materials, 796. pp. 137-144.

Yavari, S. and Sapari, N.B. and Malakahmad, A. and Yavari, S. (2019) Degradation of imazapic and imazapyr herbicides in the presence of optimized oil palm empty fruit bunch and rice husk biochars in soil. Journal of Hazardous Materials. pp. 636-642.

Yekeen, N. and Manan, M.A. and Idris, A.K. and Padmanabhan, E. and Junin, R. and Samin, A.M. and Gbadamosi, A.O. and Oguamah, I. (2019) Corrigendum to â��A comprehensive review of experimental studies of nanoparticles-stabilized foam for enhanced oil recoveryâ�� (Journal of Petroleum Science and Engineering (2018) 164 (43â��74), (S0920410518300445) (10.1016/j.petrol.2018.01.035)). Journal of Petroleum Science and Engineering, 174. pp. 1332-1338.

Yahya, E.A. and Kannan, R. and Lee, L. (2019) Simulation study of single event effects sensitivity on commercial power MOSFET with single heavy ion radiation. Bulletin of Electrical Engineering and Informatics, 8 (4). pp. 1260-1267.

Yusof, Y.M. and Shukur, M.F. and Hamsan, M.H. and Jumbri, K. and Kadir, M.F.Z. (2019) Plasticized solid polymer electrolyte based on natural polymer blend incorporated with lithium perchlorate for electrical double-layer capacitor fabrication. Ionics, 25 (11). pp. 5473-5484.

Yeong, Y.-C. and Kalid, K.S. and Sugathan, S.K. (2019) Cryptocurrency adoption in Malaysia: Does age, income and education level matter? International Journal of Innovative Technology and Exploring Engineering, 8 (11). pp. 2179-2184.

Yahya, S. and Othman, N.K. and Ismail, M.C. (2019) Corrosion inhibition of steel in multiple flow loop under 3.5 NaCl in the presence of rice straw extracts, lignin and ethylene glycol. Engineering Failure Analysis, 100. pp. 365-380.

Yahaya, A.Z. and Somalu, M.R. and Muchtar, A. and Sulaiman, S.A. and Wan Daud, W.R. (2019) Effect of particle size and temperature on gasification performance of coconut and palm kernel shells in downdraft fixed-bed reactor. Energy, 175. pp. 931-940.

Yasir, M. and Ahmad, F. and Melor, P.S. and Ullah, S. and Ali, M. (2019) The influence of fiber length and concentration on the thermal properties of basalt fiber reinforced intumescent coating. International Journal of Recent Technology and Engineering, 7 (6). pp. 898-901.

Yeong, Y.F. and Khoo, T.S. (2019) Fabrication of Amino-Functionalized CAU-1/ Cellulose Acetate Mixed Matrix Membranes for CO2/N2 Separation. Key Engineering Materials, 797. pp. 39-47.

Yee, J.C. and Kee, K.E. and Hassan, S. and Nor, M.F.M. and Ismail, M.C. (2019) Corrosion inhibition of molybdate and nitrite for carbon steel corrosion in process cooling water. Journal of Engineering Science and Technology, 14 (4). pp. 2431-2444.

Yusoff, N.H.N. and Mamat, O. and Isa, M.C. (2019) Properties of electrodeposited nickel cobalt coated mild steel developed from alkaline bath. Defence S and T Technical Bulletin, 12 (1). pp. 150-160.

Yaakob, S.M. and Sufian, S. and Rabat, N.E. and Azizli, K.A.M. (2019) The microstructural and mechanical properties of glass fiber reinforced geopolymer composites. Malaysian Journal of Microscopy, 15 (1). pp. 164-176.

Yusliandi, A. and Sautter, B. and Poppelreiter, M.C. (2019) The various controls on the platform architecture of carbonate buildups in the Central Luconia Province, Offshore Sarawak. Petroleum and Coal, 61 (6). pp. 1425-1437.

Yeong, Y.F. and Khoo, T.S. (2019) Fabrication of Amino-Functionalized CAU-1/ Cellulose Acetate Mixed Matrix Membranes for CO2/N2 Separation. Key Engineering Materials, 797. pp. 39-47.

Yousufi, Muhammad Mohsin and Elhaj, Mysara Eissa Mohyaldinn and Moniruzzaman, Muhammad and Ayoub, Mohammed Abdalla and Nazri, Amir Badzly Mohd and Husin, Hazlina binti and Saaid, Ismail bin Mohd (2019) Synthesis and evaluation of Jatropha oil-based emulsified acids for matrix acidizing of carbonate rocks. Journal of Petroleum Exploration and Production Technology, 9. pp. 1119-1133.

Z

Zulfiqar, Muhammad and Samsudin, Mohamad Fakhrul Ridhwan and Sufian, Suriati (2019) Modelling and optimization of photocatalytic degradation of phenol via TiO2 nanoparticles: An insight into response surface methodology and artificial neural network. Journal of Photochemistry and Photobiology A: Chemistry, 384. p. 112039.

Zia ul Mustafa, Muhammad and bin Mukhtar, Hilmi and Md Nordin, Nik Abdul Hadi and Mannan, Hafiz Abdul and Nasir, Rizwan and Fazil, Nabilah (2019) Recent developments and applications of ionic liquids in gas separation membranes. Chemical Engineering & Technology, 42 (12). pp. 2580-2593.

Zia-ul-Mustafa, M and Mannan, Hafiz Abdul and Mukhtar, Hilmi and Nasir, Rizwan and Mohshim, Dzeti Farhah and Nordin, NAHM (2019) Application of Ionic Liquids in Gas Separation Membranes. Industrial Applications of Green Solvents; Inamuddin, MIA, Asiri, AM, Eds. pp. 320-344.

Zia-ul-Mustafa, M and Mukhtar, Hilmi and Nordin, NAHM and Mannan, HA (2019) Effect of imidazolium based ionic liquids on PES membrane for CO2/CH4 separation. Materials Today: Proceedings, 16. pp. 1976-1982.

Zhalehrajabi, Ehsan and Lau, Kok Keong and Ku Shaari, Ku Zilati and Zahraee, Seyed Mojib and Seyedin, Seyed Hadi and Azeem, Babar and Shaaban, Azizah (2019) Effect of biodegradable binder properties and operating conditions on growth of urea particles in a fluidized bed granulator. Materials, 12 (14). p. 2320.

Zaffar, M. and Hashmani, M.A. and Savita, K.S. (2019) Comparing the performance of FCBF, Chi-Square and relief-F filter feature selection algorithms in educational data mining. Advances in Intelligent Systems and Computing, 843. pp. 151-160.

Zakaria, Z.A. and Mohd Jasri, M.A.H. and Yaacob, A. and Hasan, K.N.M. and Othman, A.R. (2019) Effect of Bevel Angle and Welding Current on T-Joint Using Gas Metal Arc Welding (GMAW). Lecture Notes in Mechanical Engineering. pp. 49-57.

Zailan, K.A.M. and Hasan, M.H. and Witjaksono, G. (2019) Variable step size least mean square optimization for motion artifact reduction: A review. Advances in Intelligent Systems and Computing, 985. pp. 182-190.

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Samsudin, A.E. and Shahid, M.U. (2019) Improving the light scattering efficiency of photoelectrode dye-sensitized solar cell through optimization of core-shell structure. Materials Today Communications, 19. pp. 220-229.

Zaine, Siti Nur Azella and Mohamed, Norani Muti and Khatani, Mehboob and Samsudin, Adel Eskandar and Shahid, Muhammad Umair (2019) Improving the light scattering efficiency of photoelectrode dye-sensitized solar cell through optimization of core-shell structure. Materials Today Communications, 19. 220 - 229.

Zia ul Mustafa, M. and bin Mukhtar, H. and Md Nordin, N.A.H. and Mannan, H.A. and Nasir, R. and Fazil, N. (2019) Recent Developments and Applications of Ionic Liquids in Gas Separation Membranes. Chemical Engineering and Technology, 42 (12). pp. 2580-2593.

Zhang, H. and Watada, J. and Wang, B. (2019) Sensitivity-based fuzzy multi-objective portfolio model with Value-at-Risk. IEEJ Transactions on Electrical and Electronic Engineering, 14 (11). pp. 1639-1651.

Zakaria, M.R. and Md Akil, H. and Abdul Kudus, M.H. and Ullah, F. and Javed, F. and Nosbi, N. (2019) Hybrid carbon fiber-carbon nanotubes reinforced polymer composites: A review. Composites Part B: Engineering, 176.

Zakaria, Z.A.B. and Hasan, K.N.M. and Bashah, N.A.K. and Khoirunnizam, M.F.B. and Johari, M.N.B. and Arifuzzaman, A.H.B. and Razak, M.N.B.A. (2019) Effect of stress distribution on transverse and longitudinal framing in cargo ship using FEA method. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 5640-5646.

Zoolfakar, M.R. and Tanggabello, A. and Zaman, N.A.B.N. and Osman, N.B. (2019) Recycling waste product via pyorlysis method to produce marine fuel. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 5546-5548.

Zakaria, N.N. and Sokkalingam, R. and Daud, H. and Othman, M. (2019) Forecasting air pollution index in Klang by markov chain model. International Journal of Engineering and Advanced Technology, 8 (6 Spec). pp. 635-639.

Zaman, A.B.K. and Mustaffa, Z. and Giri, L.D.L.A. (2019) Infiltration rate of pervious concrete on street curb application. International Journal of Recent Technology and Engineering, 8 (2 Spec).

Zanuri, M.N.A. and Lubis, L.A. and Kadir, A.A. (2019) 4D Seismic Feasbility of Central Luconia FOT Field. ARPN Journal of Engineering and Applied Sciences, 14 (Specia). pp. 2440-2449.

Zainol Murad, S.A. and Azizan, A. and Sapawi, R. and Zulkifli, T.Z.A. (2019) Ultra-Low Power 0.55 mW 2.4 GHz CMOS Low-Noise Amplifier for Wireless Sensor Network. IETE Journal of Research.

Zamin, N. and Norwawi, N.M. and Arshad, N.I. and Ismail, M.A.A. (2019) Jawi alphabot: A jawi teaching robot for children with autism. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.4 S1). pp. 363-367.

Zamin, N. and Norwawi, N.M. and Nursyafira and Arshad, N.I. and Rambli, D.R.A. (2019) Make me speak: A mobile app for children with cerebral palsy. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.4 S1). pp. 368-373.

Zainuddin, N.M. and Jamaludin, S.N.F. and Meng, C.C. and Ismail, M.S. (2019) The geology of Kudat Peninsula, Sabah: New insights from field geology and subsurface interpretation. Bulletin of the Geological Society of Malaysia, 68. pp. 99-107.

Zanuri, M.N.A. and Lubis, L.A. and Kadir, A.A. (2019) 4D Seismic Feasbility of Central Luconia FOT Field. ARPN Journal of Engineering and Applied Sciences, 14 (Specia). pp. 2440-2449.

This list was generated on Sun Dec 22 20:35:32 2024 +08.