Browse by Type

Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items: 1414.

A

Abidin, Mardhati Zainal and Rusli, Risza and Khan, Faisal and Shariff, Azmi Mohd (2018) Development of inherent safety benefits index to analyse the impact of inherent safety implementation. Process Safety and Environmental Protection, 117. pp. 454-472.

Ahmad, Faizan and Keong, Lau Kok and Shariff, Azmi Mohd (2018) Parameters prediction and simulation of hollow fiber membrane system.

Aftab, Asma and Shariff, AM and Garg, Sahil and Lal, Bhajan and Shaikh, MS and Faiqa, Nor (2018) Solubility of CO2 in aqueous sodium β-alaninate: experimental study and modeling using Kent Eisenberg model. Chemical Engineering Research and Design, 131. pp. 385-392.

Ali, Abulhassan and Maqsood, Khuram and Shin, Lam Pei and Sellappah, Varsheta and Garg, Sahil and Shariff, Azmi BM and Ganguly, Saibal (2018) Synthesis and mixed integer programming based optimization of cryogenic packed bed pipeline network for purification of natural gas. Journal of Cleaner Production, 171. pp. 795-810.

Athar, Muhammad and Shariff, Azmi Mohd and Buang, Azizul and Hermansyah, Heri (2018) Inherently safer mechanical material selection for process equipment. Process Safety and Environmental Protection, 120. pp. 178-186.

AbdulKareem, Firas A and Shariff, Azmi Mohd and Ullah, Sami and See, Tan Lian and Keong, Lau Kok and Mellon, Nurhayati (2018) Adsorption performance of 5A molecular sieve zeolite in water vapor—binary gas environment: Experimental and modeling evaluation. Journal of Industrial and Engineering Chemistry, 64. pp. 173-187.

Aleem, Waqas and Mellon, Nurhayati (2018) Model for the prediction of separation profile of oil-in-water emulsion. Journal of Dispersion Science and Technology, 39 (1). pp. 8-17.

Azizan, MT and Mellon, N and Ramli, RM and Yusup, S (2018) Improving teamwork skills and enhancing deep learning via development of board game using cooperative learning method in Reaction Engineering course. Education for Chemical Engineers, 22. pp. 1-13.

Al-Swai, Basem M and Osman, Noridah and Alnarabiji, Mohamad Sahban and Adesina, Adesoji A and Abdullah, Bawadi (2018) Syngas production via methane dry reforming over ceria—magnesia mixed oxide-supported nickel catalysts. Industrial & Engineering Chemistry Research, 58 (2). pp. 539-552.

Abidin, Mardhati Zainal and Rusli, Risza and Khan, Faisal and Shariff, Azmi Mohd (2018) Development of inherent safety benefits index to analyse the impact of inherent safety implementation. Process Safety and Environmental Protection, 117. pp. 454-472.

Adam, Ibrahim Khalil and Abdul Aziz, Abdul Rashid and Heikal, Morgan R and Yusup, Suzana and Ahmad, Ahmad Shahrul and Zainal Abidin, Ezrann Zharif (2018) Performance and emission analysis of rubber seed, palm, and their combined blend in a multi-cylinder diesel engine. Energies, 11 (6). p. 1522.

A Ismael, Mhadi and R Heikal, Morgan and A Aziz, A Rashid and El-Adawy, Mohammed (2018) The effect of injection pressure on the droplet size distributions and micro-explosion/Mhadi A. Ismael...et al. Journal of Mechanical Engineering (JMechE) (1). pp. 91-102.

Alnarabiji, Mohamad Sahban and Zabidi, Noor Asmawati Mohd and Ramli, Anita and Ghanem, Ouahid Ben and Abdullah, Bawadi (2018) Controllable green synthesis of supported hollow NiO crystals with shape evolution from octahedral to novel truncated octahedral. CrystEngComm, 20 (42). pp. 6662-6666.

Abd Ghani, Nur Azeanni and Azapour, Abbas and Syed Muhammad, Syed Anuar Faua�ad and Mohamed Ramli, Nasser and Vo, Dai-Viet N and Abdullah, Bawadi (2018) Dry reforming of methane for syngas production over Ni--Co-supported Al 2 O 3--MgO catalysts. Applied Petrochemical Research, 8. pp. 263-270.

Ahmad, Faizan and Keong, Lau Kok and Shariff, Azmi Mohd (2018) Parameters prediction and simulation of hollow fiber membrane system.

AbdulKareem, Firas A and Shariff, Azmi Mohd and Ullah, Sami and See, Tan Lian and Keong, Lau Kok and Mellon, Nurhayati (2018) Adsorption performance of 5A molecular sieve zeolite in water vapor—binary gas environment: Experimental and modeling evaluation. Journal of Industrial and Engineering Chemistry, 64. pp. 173-187.

AbdulKareem, Firas A and Shariff, Azmi Mohd and Ullah, Sami and See, Tan Lian and Keong, Lau Kok and Mellon, Nurhayati (2018) Adsorption performance of 5A molecular sieve zeolite in water vapor—binary gas environment: Experimental and modeling evaluation. Journal of Industrial and Engineering Chemistry, 64. pp. 173-187.

Athar, M and Shariff, AM and Buang, A and Zaini, D (2018) Integrated safety and process optimization approach for ammonia synthesis loop. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5074-5085.

Ahmad, P. and Khandaker, M.U. and Muhammad, N. and Rehman, F. and Khan, G. and Khan, A.S. and Ullah, Z. and Rehman, M.A. and Ahmed, S. and Gulzar, M. and Din, I.U. and Ahmed, S.M. and Ali, H. and Arshid, N. (2018) Magnesium diboride (MgB2): An effective and novel precursor for the synthesis of vertically aligned BNNTs. Materials Research Bulletin, 98. pp. 235-239.

Ahmad, M.S. and Mohshim, D.F. and Nasir, R. and Mannan, H.A. and Mukhtar, H. (2018) Effect of solvents on the morphology and performance of Polyethersulfone (PES) polymeric membranes material for CO2/CH4 separation. IOP Conference Series: Materials Science and Engineering, 290 (1).

Awais, M. and Badruddin, N. and Drieberg, M. (2018) EEG Brain Connectivity Analysis to Detect Driver Drowsiness Using Coherence. Proceedings - 2017 International Conference on Frontiers of Information Technology, FIT 2017, 2017-J. pp. 110-114.

Al-Kayiem, H.H. and Sreejaya, K.V. and Chikere, A.O. (2018) Experimental and numerical analysis of the influence of inlet configuration on the performance of a roof top solar chimney. Energy and Buildings, 159. pp. 89-98.

Alshishani, A. and Salhimi, S.M. and Saad, B. (2018) Salting-out assisted liquid-liquid extraction coupled with hydrophilic interaction chromatography for the determination of biguanides in biological and environmental samples. Journal of Chromatography B: Analytical Technologies in the Biomedical and Life Sciences, 1073. pp. 51-59.

Ahmad, A. and Bhat, A.H. and Buang, A. (2018) Biosorption of transition metals by freely suspended and Ca-alginate immobilised with Chlorella vulgaris: Kinetic and equilibrium modeling. Journal of Cleaner Production, 171. pp. 1361-1375.

Ali, A. and Maqsood, K. and Shin, L.P. and Sellappah, V. and Garg, S. and Shariff, A.B.M. and Ganguly, S. (2018) Synthesis and mixed integer programming based optimization of cryogenic packed bed pipeline network for purification of natural gas. Journal of Cleaner Production, 171. pp. 795-810.

Alshishani, A.A. and Saad, B. and Semail, N.F. and Mohamad Salhimi, S. and Talib, M.K.M. (2018) Salting-out assisted liquid-liquid extraction method coupled to gas chromatography for the simultaneous determination of thujones and pulegone in beverages. International Journal of Food Properties, 20. S2776-S2785.

Aleem, W. and Mellon, N. (2018) Model for the prediction of separation profile of oil-in-water emulsion. Journal of Dispersion Science and Technology, 39 (1). pp. 8-17.

Alaloul, W.S. and Liew, M.S. and Wan Zawawi, N.A. (2018) Communication, coordination and cooperation in construction projects: Business environment and human behaviours. IOP Conference Series: Materials Science and Engineering, 291 (1).

Abdullah, M.A. and Mukhtar, H. and Fong, Y.Y. and Shaharun, M.S. and Mannan, H.A. (2018) Effect of TiO2 incorporation on separation performance of pure PES and PES/PVAc blend membranes. Materials Science Forum, 923 MS. pp. 35-39. (Submitted)

Ali, A.A. and Dominic, P.D.D. (2018) The influence of technological factors on individual�s intention towards knowledge sharing practice. International Journal of Business Information Systems, 27 (3). pp. 331-348.

Ali, M. and Yaacob, R.A.I.R. and Endut, M.N.A.-A. and Sulam, M. (2018) The influence of contents utility on students' use of social media. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 93-110.

Abdalla, I.I. and Ibrahim, T. and Nor, N.M. (2018) Analysis of Tubular Linear Motors for Different Shapes of Magnets. IEEE Access, 6. pp. 10297-10310.

Azizan, M.T. and Mellon, N. and Ramli, R.M. and Yusup, S. (2018) Improving teamwork skills and enhancing deep learning via development of board game using cooperative learning method in Reaction Engineering course. Education for Chemical Engineers, 22. pp. 1-13.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Keong, L.K. and Mellon, N. (2018) Total and partial uptakes of multicomponent vapor-gas mixtures on 13X zeolite at 343K: Experimental and modeling study. Microporous and Mesoporous Materials, 258. pp. 95-113.

Arahman, N. and Mukramah and Syawaliah and Maimun, T. and Bilad, M.R. (2018) Fabrication of polyethersulfone membranes using nanocarbon as additive. International Journal of GEOMATE, 15 (50). pp. 51-57.

Alansari, A. and Salim, A.M.A. and Janjuhah, H.T. and Fello, N.M. (2018) Enhanced delineation of glacial clastic reservoirs by the application of petroelastic well correlation and seismic inversion: Case study. Petroleum and Coal, 60 (3). pp. 386-401.

Al-Kayiem, H.H. and Mustafa, A.T. and Gilani, S.I.U. (2018) Solar vortex engine: Experimental modelling and evaluation. Renewable Energy, 121. pp. 389-399.

Ayub, T. and Khan, S.U. and Shafiq, N. (2018) Flexural modelling and finite element analysis of frc beams reinforced with PVA and basalt fibres and their validation. Advances in Civil Engineering, 2018.

Abdullah, M.R.T.L. and Siraj, S. (2018) The evaluation of mLearning implementation model for English Language learning via Fuzzy Delphi method. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 33-54.

Abdulkadir, S.J. and Alhussian, H. and Alzahrani, A.I. (2018) Analysis of recurrent neural networks for henon simulated time-series forecasting. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-8). pp. 155-159.

Al-Hajri, S.A. and Ghayas, S. and Echchabi, A. (2018) Investigating the e-learning acceptance in Oman: Application of structural equation modelling approach. Journal of Computer Science, 14 (3). pp. 368-375.

Al-shargie, F. and Tang, T.B. and Badruddin, N. and Kiguchi, M. (2018) Towards multilevel mental stress assessment using SVM with ECOC: an EEG approach. Medical and Biological Engineering and Computing, 56 (1). pp. 125-136.

Al-Bared, M.A.M. and Harahap, I.S.H. and Marto, A. (2018) Sustainable strength improvement of soft clay stabilized with two sizes of recycled additive. International Journal of GEOMATE, 15 (51). pp. 39-46.

Abbas, M.K. and Tong, B. (2018) Context-aware based alert system for people with hearing impairments. Journal of Engineering and Applied Sciences, 13 (Specia). pp. 2309-2316.

Adamu, M. and Mohammed, B.S. and Liew, M.S. (2018) Effect of crumb rubber and nano silica on the creep and drying shrinkage of roller compacted concrete pavement. International Journal of GEOMATE, 15 (47). pp. 58-65.

Ahmad, F. and Draz, M.U. and Yang, S.-C. (2018) What drives OFDI? Comparative evidence from ASEAN and selected Asian economies. Journal of Chinese Economic and Foreign Trade Studies, 11 (1). pp. 15-31.

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Shahir Liew, M. (2018) Effect of crumb rubber and nano silica on the fatigue performance of roller compacted concrete pavement. Cogent Engineering, 5 (1).

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Shahir Liew, M. (2018) Skid Resistance of nano silica modified roller compacted rubbercrete for pavement applications: Experimental methods and response surface methodology. Cogent Engineering, 5 (1).

Amin, A. and Basri, S. and Hassan, M.F. and Rehman, M. (2018) A snapshot of 26 years of research on creativity in software engineering - A systematic literature review. Lecture Notes in Electrical Engineering, 425. pp. 430-438.

Adnan, N. and Md Nordin, S. and Althawadi, O.M. (2018) Barriers towards widespread adoption of V2G technology in smart grid environment: From laboratories to commercialization. Studies in Systems, Decision and Control, 145. pp. 121-134.

Affam, A.C. and Chaudhuri, M. and Kutty, S.R.M. (2018) Comparison of five advanced oxidation processes for degradation of pesticide in aqueous solution. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (1). pp. 179-186.

Abu Bakar, E. and Othman, W.A.F.W. and Othman, A.R. (2018) Systematic approach for uncertainty delta E data for composites panel coating analysis. Lecture Notes in Mechanical Engineering (978981). pp. 131-140.

Abd Ghani, N.A. and Azapour, A. and Syed Muhammad, A.F. and Abdullah, B. (2018) Dry reforming of methane for hydrogen production over Ni�Co catalysts: Effect of Nb�Zr promoters. International Journal of Hydrogen Energy.

Awad, A. and Masiran, N. and Abdus Salam, M. and Vo, D.-V.N. and Abdullah, B. (2018) Non-oxidative decomposition of methane/methanol mixture over mesoporous Ni-Cu/Al2O3 Co-doped catalysts. International Journal of Hydrogen Energy.

Assadi, M.K. and Bakhoda, S. and Saidur, R. and Hanaei, H. (2018) Recent progress in perovskite solar cells. Renewable and Sustainable Energy Reviews, 81. pp. 2812-2822.

Adam, I.K. and Abdul Aziz, A.R. and Heikal, M.R. and Yusup, S. and Firmansyah and Ahmad, A.S. and Zainal Abidin, E.Z. (2018) Performance and emission analysis of rubber seed, palm, and their combined blend in a multi-cylinder diesel engine. Energies, 11 (6).

Amiri, I.S. and Ariannejad, M.M. and Azzuhri, S.R.B. and Anwar, T. and Kouhdaragh, V. and Yupapin, P. (2018) Vertical Ge photodetector base on InP taper waveguide. Results in Physics, 9. pp. 576-579.

Akilu, S. and Baheta, A.T. and M.Said, M.A. and Minea, A.A. and Sharma, K.V. (2018) Properties of glycerol and ethylene glycol mixture based SiO2-CuO/C hybrid nanofluid for enhanced solar energy transport. Solar Energy Materials and Solar Cells, 179. pp. 118-128.

Avila-Torres, P. and Caballero, R. and Litvinchev, I. and Lopez-Irarragorri, F. and Vasant, P. (2018) The urban transport planning with uncertainty in demand and travel time: a comparison of two defuzzification methods. Journal of Ambient Intelligence and Humanized Computing, 9 (3). pp. 843-856.

Adamu, M. and Mohammed, B.S. and Shahir Liew, M. (2018) Mechanical properties and performance of high volume fly ash roller compacted concrete containing crumb rubber and nano silica. Construction and Building Materials, 171. pp. 521-538.

Aman, M. and Said, A.M. and Kadir, S.J.A. and Ullah, I. (2018) Key concept identification: A comprehensive analysis of frequency and topical graph-based approaches. Information (Switzerland), 9 (5).

Atkins, M. and de Haan, A.B. and Abdul Mutalib, M.I.B. and Jacquemin, J. (2018) Editorial special issue Separation and Purification Technology on ILSEPT-3. Separation and Purification Technology, 196. pp. 1-2.

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Anwaar Asghar, H.M. and Bhattacharjee, S. (2018) Green synthesis of stabilized spherical shaped gold nanoparticles using novel aqueous Elaeis guineensis (oil palm) leaves extract. Journal of Molecular Structure, 1159. pp. 167-173.

Aslam, M. and Rahim, L.B.A. and Watada, J. and Hashmani, M. (2018) Clustering-based cloud migration strategies. Journal of Advanced Computational Intelligence and Intelligent Informatics, 22 (3). pp. 295-305.

Adebayo, O.F. and Adegoke, A.K. and Mustapha, K.A. and Adeleye, M.A. and Agbaji, A.O. and Abidin, N.S.Z. (2018) Paleoenvironmental reconstruction and hydrocarbon potentials of Upper Cretaceous sediments in the Anambra Basin, southeastern Nigeria. International Journal of Coal Geology, 192. pp. 56-72.

Ali, S. and Rani, A.M.A. and Altaf, K. and Baig, Z. (2018) Investigation of Boron addition and compaction pressure on the compactibility, densification and microhardness of 316L Stainless Steel. IOP Conference Series: Materials Science and Engineering, 344 (1).

Alkali, A.U. and Ginta, T.L. and Abdulrani, A.M. and Elsiti, N.M. (2018) Fundamental investigation on influence of external heat on chip formation during thermal assisted machining. IOP Conference Series: Materials Science and Engineering, 344 (1).

Ahmad, N.R. and Jamin, N.H. (2018) Preliminary view of geotechnical properties of soft rocks of Semanggol formation at Pokok Sena, Kedah. IOP Conference Series: Earth and Environmental Science, 140 (1).

Al-Fakih, A. and Mohammed, B.S. and Nuruddin, F. and Nikbakht, E. (2018) Development of Interlocking Masonry Bricks and its' Structural Behaviour: A Review Paper. IOP Conference Series: Earth and Environmental Science, 140 (1).

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2018) Abrasion Resistance of Nano Silica Modified Roller Compacted Rubbercrete: Cantabro Loss Method and Response Surface Methodology Approach. IOP Conference Series: Earth and Environmental Science, 140 (1).

Al-Bared, M.A.M. and Marto, A. and Latifi, N. (2018) Utilization of Recycled Tiles and Tyres in Stabilization of Soils and Production of Construction Materials � A State-of-the-Art Review. KSCE Journal of Civil Engineering. pp. 1-15.

Abdalla, E.A.H. and Nallagownden, P. and Nor, N.B.M. and Romlie, M.F. and Hassan, S.M. (2018) An application of a novel technique for assessing the operating performance of existing cooling systems on a university campus. Energies, 11 (4).

Ahmed, S. and Elraies, K.A. and Hashmet, M.R. and Alnarabiji, M.S. (2018) Empirical modeling of the viscosity of supercritical carbon dioxide foam fracturing fluid under different downhole conditions. Energies, 11 (4).

Al Qudah, A. and Abdul Rahim, M. and Ghazaly, M.Z. and Mashaan, N.S. and Koting, S. and Napiah, M. and Wan Omar, W.M.S. and Issa, Y. (2018) Effect of aged crumb rubber bitumen on performance dense graded mix in Malaysia. International Journal of Civil Engineering and Technology, 9 (4). pp. 1356-1369.

Alaba, P.A. and Oladoja, N.A. and Sani, Y.M. and Ayodele, O.B. and Mohammed, I.Y. and Olupinla, S.F. and Daud, W.M.W. (2018) Insight into wastewater decontamination using polymeric adsorbents. Journal of Environmental Chemical Engineering, 6 (2). pp. 1651-1672.

Abdalla, A.M. and Hossain, S. and Petra, P.M. and Ghasemi, M. and Azad, A.K. (2018) Achievements and trends of solid oxide fuel cells in clean energy field: a perspective review. Frontiers in Energy. pp. 1-24.

Afzal, T. and Isa, M.H. and Raza Ul Mustafa, M. (2018) Removal of organic pollutants from produced water using Fenton oxidation. E3S Web of Conferences, 34.

Al-Bared, M.A.M. and Marto, A. and Harahap, I.S.H. and Kasim, F. (2018) Compaction and Plasticity Comparative Behaviour of Soft Clay Treated with Coarse and Fine Sizes of Ceramic Tiles. E3S Web of Conferences, 34.

Al-Bared, M.A.M. and Marto, A. and Latifi, N. and Horpibulsuk, S. (2018) Sustainable Improvement of Marine Clay Using Recycled Blended Tiles. Geotechnical and Geological Engineering. pp. 1-13.

Abdulmalek, S.H. and Assadi, M.K. and Al-Kayiem, H.H. and Gitan, A.A. (2018) Effect of Tube Diameter on the Design of Heat Exchanger in Solar Drying system. IOP Conference Series: Materials Science and Engineering, 328 (1).

Ayob, F. and Hussain, P. and Awang, M. and Zoolfakar, M.R. and Abdullah, A. and Baharudin, B.A. and Abdul Rahim, A.A. (2018) Effect of post heat treatment on the microstructure and microhardness of diffusion coupled gray cast iron and low carbon steel. IOP Conference Series: Materials Science and Engineering, 328 (1).

Azam, F.I. and Abdul Rani, A.M. and Altaf, K. and Rao, T.V.V.L.N. and Zaharin, H.A. (2018) An In-Depth Review on Direct Additive Manufacturing of Metals. IOP Conference Series: Materials Science and Engineering, 328 (1).

Abdul-Rani, A.M. and Sidid, A.A.B.C. and Ab Adzis, A.H. (2018) Study on the Effect of Diamond Grain Size on Wear of Polycrystalline Diamond Compact Cutter. IOP Conference Series: Materials Science and Engineering, 328 (1).

Abdul Wahhab, H.A. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. and Reda, M.N. (2018) Application of Electromagnetic Induction Technique to Measure the Void Fraction in Oil/Gas Two Phase Flow. IOP Conference Series: Materials Science and Engineering, 328 (1).

Ali, A.M. and Padmanabhan, E. and Baioumy, H. (2018) Incorporation of silica into the goethite structure: a microscopic and spectroscopic study. Acta Geochimica. pp. 1-11.

Athar, M. and Shariff, A.M. and Buang, A. and Zaini, D. (2018) Integrated safety and process optimization approach for ammonia synthesis loop. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5074-5085.

Ali, A. and Mohd Nor, N. and Ibrahim, T. and Fakhizan Romlie, M. (2018) Sizing and placement of solar photovoltaic plants by using time-series historical weather data. Journal of Renewable and Sustainable Energy, 10 (2).

AL-Qutami, T.A. and Ibrahim, R. and Ismail, I. and Ishak, M.A. (2018) Virtual multiphase flow metering using diverse neural network ensemble and adaptive simulated annealing. Expert Systems with Applications, 93. pp. 72-85.

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Asghar, H.M.A. and Bhattacharjee, S. (2018) Effect of volume of gold chloroauric acid on size, shape and stability of biosynthesized AuNPs using aqueous Elaeis guineensis (oil palm) leaves extract. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5135-5145.

Abdalsalam, E. and Yusoff, M.Z. and Malik, A. and Kamel, N.S. and Mahmoud, D. (2018) Modulation of sensorimotor rhythms for brain-computer interface using motor imagery with online feedback. Signal, Image and Video Processing, 12 (3). pp. 557-564.

Aftab, A. and M. Shariff, A. and Garg, S. and Lal, B. and Shaikh, M.S. and Faiqa, N. (2018) Solubility of CO2 in aqueous sodium β-alaninate: Experimental study and modeling using Kent Eisenberg model. Chemical Engineering Research and Design, 131. pp. 385-392.

Anjum, H. and Obaid, M.A. and Shamim, M.Y. and Murugesan, T. (2018) Adsorption of Benzene by "green" functionalization of Montmorillonite. MATEC Web of Conferences, 150.

Abd Halim, F.A. and Mohd Ariffin, M. and Sugathan, S.K. (2018) Towards the Development of Mobile App Design Model for Dyscalculia Children in Malaysia. MATEC Web of Conferences, 150.

Abdulelah, H. and Mahmood, S.M. and Al-Mutarreb, A. (2018) Effect of Anionic Surfactant on Wettability of Shale and Its Implication on Gas Adsorption/Desorption Behavior. Energy and Fuels, 32 (2). pp. 1423-1432.

Adil, M. and Lee, K. and Zaid, H.M. and Latiff, N.R.A. and Alnarabiji, M.S. (2018) Experimental study on electromagnetic-assisted ZnO nanofluid flooding for enhanced oil recovery (EOR). PLoS ONE, 13 (2).

Abd Majid, M.A. and Talib, N. (2018) Exhaust steam for biomass drying - Potential efficiency enhancement of palm oil mill cogeneration plant. ARPN Journal of Engineering and Applied Sciences, 13 (4). pp. 1512-1517.

Ahmad, A. and Bhat, A.H. and Buang, A. (2018) Enhanced biosorption of transition metals by living Chlorella vulgaris immobilized in Ca-alginate beads. Environmental Technology (United Kingdom). pp. 1-17.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Dreisbach, F. and Keong, L.K. and Mellon, N. and Garg, S. (2018) Experimental measurements and modeling of supercritical CO2 adsorption on 13X and 5A zeolites. Journal of Natural Gas Science and Engineering, 50. pp. 115-127.

Adham Adnan, M. and Kee, K.-E. and Raja, P.B. and Ismail, M.C. and Kakooei, S. (2018) Influence of Heat Treatment on the Corrosion of Carbon Steel in Environment Containing Carbon Dioxide and Acetic Acid. IOP Conference Series: Materials Science and Engineering, 370 (1).

Abdullah, M.A. and Mukhtar, H. and Fong, Y.Y. and Shaharun, M.S. and Mannan, H.A. (2018) Effect of TiO2 incorporation on separation performance of pure PES and PES/PVAc blend membranes. Materials Science Forum, 923 MS. pp. 35-39.

Abd Ghani, N.A. and Azapour, A. and Syed Muhammad, A.F. and Abdullah, B. (2018) Dry reforming of methane for hydrogen production over Ni�Co catalysts: Effect of Nb�Zr promoters. International Journal of Hydrogen Energy.

Awad, A. and Masiran, N. and Abdus Salam, M. and Vo, D.-V.N. and Abdullah, B. (2018) Non-oxidative decomposition of methane/methanol mixture over mesoporous Ni-Cu/Al2O3 Co-doped catalysts. International Journal of Hydrogen Energy.

Abdalla, A.M. and Hossain, S. and Petra, P.M. and Ghasemi, M. and Azad, A.K. (2018) Achievements and trends of solid oxide fuel cells in clean energy field: a perspective review. Frontiers in Energy. pp. 1-24.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Mellon, N. and Keong, L.K. (2018) Adsorption of pure and predicted binary (CO2:CH4) mixtures on 13X-Zeolite: Equilibrium and kinetic properties at offshore conditions. Microporous and Mesoporous Materials, 267. pp. 221-234.

AbdulKareem, F.A. and Mohd. Shariff, A. and Ullah, S. and See, T.L. and Keong, L.K. and Mellon, N. (2018) Adsorption performance of 5A molecular sieve zeolite in water vapor�binary gas environment: Experimental and modeling evaluation. Journal of Industrial and Engineering Chemistry, 64. pp. 173-187.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Dreisbach, F. and Keong, L.K. and Mellon, N. and Garg, S. (2018) Experimental measurements and modeling of supercritical CO2 adsorption on 13X and 5A zeolites. Journal of Natural Gas Science and Engineering, 50. pp. 115-127.

Aleem, W. and Mellon, N. (2018) Model for the prediction of separation profile of oil-in-water emulsion. Journal of Dispersion Science and Technology, 39 (1). pp. 8-17.

Azizan, M.T. and Mellon, N. and Ramli, R.M. and Yusup, S. (2018) Improving teamwork skills and enhancing deep learning via development of board game using cooperative learning method in Reaction Engineering course. Education for Chemical Engineers, 22. pp. 1-13.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Keong, L.K. and Mellon, N. (2018) Total and partial uptakes of multicomponent vapor-gas mixtures on 13X zeolite at 343K: Experimental and modeling study. Microporous and Mesoporous Materials, 258. pp. 95-113.

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Anwaar Asghar, H.M. and Bhattacharjee, S. (2018) Green synthesis of stabilized spherical shaped gold nanoparticles using novel aqueous Elaeis guineensis (oil palm) leaves extract. Journal of Molecular Structure, 1159. pp. 167-173.

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Asghar, H.M.A. and Bhattacharjee, S. (2018) Effect of volume of gold chloroauric acid on size, shape and stability of biosynthesized AuNPs using aqueous Elaeis guineensis (oil palm) leaves extract. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5135-5145.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Mellon, N. and Keong, L.K. (2018) Adsorption of pure and predicted binary (CO2:CH4) mixtures on 13X-Zeolite: Equilibrium and kinetic properties at offshore conditions. Microporous and Mesoporous Materials, 267. pp. 221-234.

AbdulKareem, F.A. and Mohd. Shariff, A. and Ullah, S. and See, T.L. and Keong, L.K. and Mellon, N. (2018) Adsorption performance of 5A molecular sieve zeolite in water vapor�binary gas environment: Experimental and modeling evaluation. Journal of Industrial and Engineering Chemistry, 64. pp. 173-187.

Athar, M. and Shariff, A.M. and Buang, A. and Zaini, D. (2018) Integrated safety and process optimization approach for ammonia synthesis loop. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5074-5085.

Aftab, A. and M. Shariff, A. and Garg, S. and Lal, B. and Shaikh, M.S. and Faiqa, N. (2018) Solubility of CO2 in aqueous sodium β-alaninate: Experimental study and modeling using Kent Eisenberg model. Chemical Engineering Research and Design, 131. pp. 385-392.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Dreisbach, F. and Keong, L.K. and Mellon, N. and Garg, S. (2018) Experimental measurements and modeling of supercritical CO2 adsorption on 13X and 5A zeolites. Journal of Natural Gas Science and Engineering, 50. pp. 115-127.

Ali, A. and Maqsood, K. and Shin, L.P. and Sellappah, V. and Garg, S. and Shariff, A.B.M. and Ganguly, S. (2018) Synthesis and mixed integer programming based optimization of cryogenic packed bed pipeline network for purification of natural gas. Journal of Cleaner Production, 171. pp. 795-810.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Keong, L.K. and Mellon, N. (2018) Total and partial uptakes of multicomponent vapor-gas mixtures on 13X zeolite at 343K: Experimental and modeling study. Microporous and Mesoporous Materials, 258. pp. 95-113.

Alnarabiji, M.S. and Yahya, N. and Nadeem, S. and Adil, M. and Baig, M.K. and Ghanem, O.B. and Azizi, K. and Ahmed, S. and Maulianda, B. and Klemeš, J.J. and Elraies, K.A. (2018) Nanofluid enhanced oil recovery using induced ZnO nanocrystals by electromagnetic energy: Viscosity increment. Fuel, 233. pp. 632-643.

Alebrahim, R. and Sharifishourabi, G. and Sharifi, S. and Alebrahim, M. and Zhang, H. and Yahya, Y. and Ayob, A. (2018) Thermo-mechanical behaviour of smart composite beam under quasi-static loading. Composite Structures, 201. pp. 21-28.

Abbasi, A. and Nasef, M.M. and Faridi-Majidi, R. and Etesami, M. and Takeshi, M. and Abouzari-Lotf, E. (2018) Highly flexible method for fabrication of poly (Glycidyl Methacrylate) grafted polyolefin nanofiber. Radiation Physics and Chemistry, 151. pp. 283-291.

Ali, B. and Yusup, S. and Quitain, A.T. and Alnarabiji, M.S. and Kamil, R.N.M. and Kida, T. (2018) Synthesis of novel graphene oxide/bentonite bi-functional heterogeneous catalyst for one-pot esterification and transesterification reactions. Energy Conversion and Management, 171. pp. 1801-1812.

Al-Waked, R. and Nasif, M.S. and Mostafa, D.B. (2018) Enhancing the performance of energy recovery ventilators. Energy Conversion and Management, 171. pp. 196-210.

Al-hasani, A. and Hakimi, M.H. and Saaid, I.M. and Salim, A.M.A. and Mahat, S.Q.A. and Ahmed, A.A. and Umar, A.A.B. (2018) Reservoir characteristics of the Kuhlan sandstones from Habban oilfield in the Sabatayn Basin, Yemen and their relevance to reservoir rock quality and petroleum accumulation. Journal of African Earth Sciences, 145. pp. 131-147.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Mellon, N. and Keong, L.K. (2018) Adsorption of pure and predicted binary (CO2:CH4) mixtures on 13X-Zeolite: Equilibrium and kinetic properties at offshore conditions. Microporous and Mesoporous Materials, 267. pp. 221-234.

AbdulKareem, F.A. and Mohd. Shariff, A. and Ullah, S. and See, T.L. and Keong, L.K. and Mellon, N. (2018) Adsorption performance of 5A molecular sieve zeolite in water vapor�binary gas environment: Experimental and modeling evaluation. Journal of Industrial and Engineering Chemistry, 64. pp. 173-187.

Ahmad, F. and Draz, M.U. and Yang, S.-C. (2018) Causality nexus of exports, FDI and economic growth of the ASEAN5 economies: evidence from panel data analysis. Journal of International Trade and Economic Development, 27 (6). pp. 685-700.

Abdalsalam M, E. and Yusoff, M.Z. and Mahmoud, D. and Malik, A.S. and Bahloul, M.R. (2018) Discrimination of four class simple limb motor imagery movements for brain�computer interface. Biomedical Signal Processing and Control, 44. pp. 181-190.

Ajab, H. and Dennis, J.O. and Abdullah, M.A. (2018) Synthesis and characterization of cellulose and hydroxyapatite-carbon electrode composite for trace plumbum ions detection and its validation in blood serum. International Journal of Biological Macromolecules, 113. pp. 376-385.

Abdul Aziz, N.H. and Ibrahim, Z. and Ab Aziz, N.A. and Mohamad, M.S. and Watada, J. (2018) Single-solution Simulated Kalman Filter algorithm for global optimisation problems. Sadhana - Academy Proceedings in Engineering Sciences, 43 (7).

Adnan, N. and Md Nordin, S. and Hadi Amini, M. and Langove, N. (2018) What make consumer sign up to PHEVs? Predicting Malaysian consumer behavior in adoption of PHEVs. Transportation Research Part A: Policy and Practice, 113. pp. 259-278.

Al-Mutarreb, A.M. and Jufar, S.R. and Abdulelah, H. and Padmanabhan, E. and Mostafa, G. and Ahmed, M. (2018) The Influence of shales characteristics on CO2 adsorption behaviour under sub-critical conditions. IOP Conference Series: Earth and Environmental Science, 164 (1).

Ani, C. and Norzaimi, M. and Kamaruddin and Shahrul and Azid, A. and Ishak (2018) Analysis of the effective production Kanban size with triggering system for achieving just-in-time (JIT) production. Proceedings - 2018 4th International Conference on Control, Automation and Robotics, ICCAR 2018. pp. 316-320.

Altaf, K. and Qayyum, J.A. and Rani, A.M.A. and Ahmad, F. and Megat-Yusoff, P.S.M. and Baharom, M. and Aziz, A.R.A. and Jahanzaib, M. and German, R.M. (2018) Performance analysis of enhanced 3D printed polymer molds for metal injection molding process. Metals, 8 (6).

Ahmad, A. and Lajis, M.A. and Shamsudin, S. and Yusuf, N.K. (2018) Conjectured the behaviour of a recycled metal matrix composite (MMC-AlR) developed through hot press forging by means of 3D FEM simulation. Materials, 11 (6).

Albahri, T.A. and Khor, C.S. and Elsholkami, M. and Elkamel, A. (2018) Optimal Design of Petroleum Refinery Configuration Using a Model-Based Mixed-Integer Programming Approach with Practical Approximation. Industrial and Engineering Chemistry Research, 57 (22). pp. 7555-7565.

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H.B. and Sebastian, P. and Saad, N.B. and Ibrahim, R.B. and Dass, S.C. (2018) Optimizing Visual Sensor Coverage Overlaps for Multiview Surveillance Systems. IEEE Sensors Journal, 18 (11). pp. 4544-4552.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2018) Physical properties of the rubberized interlocking masonry brick. International Journal of Civil Engineering and Technology, 9 (6). pp. 656-664.

Al-Mutarreb, A. and Jufar, S.R. and Abdulelah, H. and Padmanabhan, E. (2018) Influence of water immersion on pore system and methane desorption of shales: A case study of batu gajah and kroh shale formations in Malaysia. Energies, 11 (6).

Adham Adnan, M. and Kee, K.-E. and Raja, P.B. and Ismail, M.C. and Kakooei, S. (2018) Influence of Heat Treatment on the Corrosion of Carbon Steel in Environment Containing Carbon Dioxide and Acetic Acid. IOP Conference Series: Materials Science and Engineering, 370 (1).

Aslam, M.Z. and Jeoti, V. and Karuppanan, S. and Malik, A.F. and Iqbal, A. (2018) FEM analysis of sezawa mode SAW sensor for VOC based on CMOS compatible AlN/SiO2/Si multilayer structure. Sensors (Switzerland), 18 (6).

Ahmad, F. and Zulkurnain, E.S.B. and Ullah, S. and Amir, N. (2018) Effects of nano-sized boron nitride on thermal decomposition and water resistance behaviour of epoxy-based intumescent coating. Journal of Analytical and Applied Pyrolysis, 132. pp. 171-183.

Adam, I.K. and Abdul Aziz, A.R. and Heikal, M.R. and Yusup, S. and Firmansyah and Ahmad, A.S. and Zainal Abidin, E.Z. (2018) Performance and emission analysis of rubber seed, palm, and their combined blend in a multi-cylinder diesel engine. Energies, 11 (6).

Amiri, I.S. and Ariannejad, M.M. and Azzuhri, S.R.B. and Anwar, T. and Kouhdaragh, V. and Yupapin, P. (2018) Vertical Ge photodetector base on InP taper waveguide. Results in Physics, 9. pp. 576-579.

Akilu, S. and Baheta, A.T. and M.Said, M.A. and Minea, A.A. and Sharma, K.V. (2018) Properties of glycerol and ethylene glycol mixture based SiO2-CuO/C hybrid nanofluid for enhanced solar energy transport. Solar Energy Materials and Solar Cells, 179. pp. 118-128.

Avila-Torres, P. and Caballero, R. and Litvinchev, I. and Lopez-Irarragorri, F. and Vasant, P. (2018) The urban transport planning with uncertainty in demand and travel time: a comparison of two defuzzification methods. Journal of Ambient Intelligence and Humanized Computing, 9 (3). pp. 843-856.

Adamu, M. and Mohammed, B.S. and Shahir Liew, M. (2018) Mechanical properties and performance of high volume fly ash roller compacted concrete containing crumb rubber and nano silica. Construction and Building Materials, 171. pp. 521-538.

Aman, M. and Said, A.M. and Kadir, S.J.A. and Ullah, I. (2018) Key concept identification: A comprehensive analysis of frequency and topical graph-based approaches. Information (Switzerland), 9 (5).

Atkins, M. and de Haan, A.B. and Abdul Mutalib, M.I.B. and Jacquemin, J. (2018) Editorial special issue Separation and Purification Technology on ILSEPT-3. Separation and Purification Technology, 196. pp. 1-2.

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Anwaar Asghar, H.M. and Bhattacharjee, S. (2018) Green synthesis of stabilized spherical shaped gold nanoparticles using novel aqueous Elaeis guineensis (oil palm) leaves extract. Journal of Molecular Structure, 1159. pp. 167-173.

Aslam, M. and Rahim, L.B.A. and Watada, J. and Hashmani, M. (2018) Clustering-based cloud migration strategies. Journal of Advanced Computational Intelligence and Intelligent Informatics, 22 (3). pp. 295-305.

Adebayo, O.F. and Adegoke, A.K. and Mustapha, K.A. and Adeleye, M.A. and Agbaji, A.O. and Abidin, N.S.Z. (2018) Paleoenvironmental reconstruction and hydrocarbon potentials of Upper Cretaceous sediments in the Anambra Basin, southeastern Nigeria. International Journal of Coal Geology, 192. pp. 56-72.

Athar, M. and Shariff, A.M. and Buang, A. and Zaini, D. (2018) Integrated safety and process optimization approach for ammonia synthesis loop. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5074-5085.

Ali, A. and Mohd Nor, N. and Ibrahim, T. and Fakhizan Romlie, M. (2018) Sizing and placement of solar photovoltaic plants by using time-series historical weather data. Journal of Renewable and Sustainable Energy, 10 (2).

Aftab, A. and M. Shariff, A. and Garg, S. and Lal, B. and Shaikh, M.S. and Faiqa, N. (2018) Solubility of CO2 in aqueous sodium β-alaninate: Experimental study and modeling using Kent Eisenberg model. Chemical Engineering Research and Design, 131. pp. 385-392.

Abdullah, M.A. and Mukhtar, H. and Fong, Y.Y. and Shaharun, M.S. and Mannan, H.A. (2018) Effect of TiO2 incorporation on separation performance of pure PES and PES/PVAc blend membranes. Materials Science Forum, 923 MS. pp. 35-39.

Ali, A.A. and Dominic, P.D.D. (2018) The influence of technological factors on individual�s intention towards knowledge sharing practice. International Journal of Business Information Systems, 27 (3). pp. 331-348.

Ali, M. and Yaacob, R.A.I.R. and Endut, M.N.A.-A. and Sulam, M. (2018) The influence of contents utility on students' use of social media. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 93-110.

Abdalla, I.I. and Ibrahim, T. and Nor, N.M. (2018) Analysis of Tubular Linear Motors for Different Shapes of Magnets. IEEE Access, 6. pp. 10297-10310.

Azizan, M.T. and Mellon, N. and Ramli, R.M. and Yusup, S. (2018) Improving teamwork skills and enhancing deep learning via development of board game using cooperative learning method in Reaction Engineering course. Education for Chemical Engineers, 22. pp. 1-13.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Keong, L.K. and Mellon, N. (2018) Total and partial uptakes of multicomponent vapor-gas mixtures on 13X zeolite at 343K: Experimental and modeling study. Microporous and Mesoporous Materials, 258. pp. 95-113.

Arahman, N. and Mukramah and Syawaliah and Maimun, T. and Bilad, M.R. (2018) Fabrication of polyethersulfone membranes using nanocarbon as additive. International Journal of GEOMATE, 15 (50). pp. 51-57.

Alansari, A. and Salim, A.M.A. and Janjuhah, H.T. and Fello, N.M. (2018) Enhanced delineation of glacial clastic reservoirs by the application of petroelastic well correlation and seismic inversion: Case study. Petroleum and Coal, 60 (3). pp. 386-401.

Al-Kayiem, H.H. and Mustafa, A.T. and Gilani, S.I.U. (2018) Solar vortex engine: Experimental modelling and evaluation. Renewable Energy, 121. pp. 389-399.

Ayub, T. and Khan, S.U. and Shafiq, N. (2018) Flexural modelling and finite element analysis of frc beams reinforced with PVA and basalt fibres and their validation. Advances in Civil Engineering, 2018.

Abdullah, M.R.T.L. and Siraj, S. (2018) The evaluation of mLearning implementation model for English Language learning via Fuzzy Delphi method. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 33-54.

Abdulkadir, S.J. and Alhussian, H. and Alzahrani, A.I. (2018) Analysis of recurrent neural networks for henon simulated time-series forecasting. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-8). pp. 155-159.

Al-Hajri, S.A. and Ghayas, S. and Echchabi, A. (2018) Investigating the e-learning acceptance in Oman: Application of structural equation modelling approach. Journal of Computer Science, 14 (3). pp. 368-375.

Al-shargie, F. and Tang, T.B. and Badruddin, N. and Kiguchi, M. (2018) Towards multilevel mental stress assessment using SVM with ECOC: an EEG approach. Medical and Biological Engineering and Computing, 56 (1). pp. 125-136.

Al-Bared, M.A.M. and Harahap, I.S.H. and Marto, A. (2018) Sustainable strength improvement of soft clay stabilized with two sizes of recycled additive. International Journal of GEOMATE, 15 (51). pp. 39-46.

Abbas, M.K. and Tong, B. (2018) Context-aware based alert system for people with hearing impairments. Journal of Engineering and Applied Sciences, 13 (Specia). pp. 2309-2316.

Adamu, M. and Mohammed, B.S. and Liew, M.S. (2018) Effect of crumb rubber and nano silica on the creep and drying shrinkage of roller compacted concrete pavement. International Journal of GEOMATE, 15 (47). pp. 58-65.

Ahmad, F. and Draz, M.U. and Yang, S.-C. (2018) What drives OFDI? Comparative evidence from ASEAN and selected Asian economies. Journal of Chinese Economic and Foreign Trade Studies, 11 (1). pp. 15-31.

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Shahir Liew, M. (2018) Effect of crumb rubber and nano silica on the fatigue performance of roller compacted concrete pavement. Cogent Engineering, 5 (1).

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Shahir Liew, M. (2018) Skid Resistance of nano silica modified roller compacted rubbercrete for pavement applications: Experimental methods and response surface methodology. Cogent Engineering, 5 (1).

Amin, A. and Basri, S. and Hassan, M.F. and Rehman, M. (2018) A snapshot of 26 years of research on creativity in software engineering - A systematic literature review. Lecture Notes in Electrical Engineering, 425. pp. 430-438.

Adnan, N. and Md Nordin, S. and Althawadi, O.M. (2018) Barriers towards widespread adoption of V2G technology in smart grid environment: From laboratories to commercialization. Studies in Systems, Decision and Control, 145. pp. 121-134.

Affam, A.C. and Chaudhuri, M. and Kutty, S.R.M. (2018) Comparison of five advanced oxidation processes for degradation of pesticide in aqueous solution. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (1). pp. 179-186.

Abu Bakar, E. and Othman, W.A.F.W. and Othman, A.R. (2018) Systematic approach for uncertainty delta E data for composites panel coating analysis. Lecture Notes in Mechanical Engineering (978981). pp. 131-140.

Abd Ghani, N.A. and Azapour, A. and Syed Muhammad, A.F. and Abdullah, B. (2018) Dry reforming of methane for hydrogen production over Ni�Co catalysts: Effect of Nb�Zr promoters. International Journal of Hydrogen Energy.

Awad, A. and Masiran, N. and Abdus Salam, M. and Vo, D.-V.N. and Abdullah, B. (2018) Non-oxidative decomposition of methane/methanol mixture over mesoporous Ni-Cu/Al2O3 Co-doped catalysts. International Journal of Hydrogen Energy.

Assadi, M.K. and Bakhoda, S. and Saidur, R. and Hanaei, H. (2018) Recent progress in perovskite solar cells. Renewable and Sustainable Energy Reviews, 81. pp. 2812-2822.

Alnarabiji, M.S. and Yahya, N. and Nadeem, S. and Adil, M. and Baig, M.K. and Ghanem, O.B. and Azizi, K. and Ahmed, S. and Maulianda, B. and Klemeš, J.J. and Elraies, K.A. (2018) Nanofluid enhanced oil recovery using induced ZnO nanocrystals by electromagnetic energy: Viscosity increment. Fuel, 233. pp. 632-643.

Alebrahim, R. and Sharifishourabi, G. and Sharifi, S. and Alebrahim, M. and Zhang, H. and Yahya, Y. and Ayob, A. (2018) Thermo-mechanical behaviour of smart composite beam under quasi-static loading. Composite Structures, 201. pp. 21-28.

Abbasi, A. and Nasef, M.M. and Faridi-Majidi, R. and Etesami, M. and Takeshi, M. and Abouzari-Lotf, E. (2018) Highly flexible method for fabrication of poly (Glycidyl Methacrylate) grafted polyolefin nanofiber. Radiation Physics and Chemistry, 151. pp. 283-291.

Ali, B. and Yusup, S. and Quitain, A.T. and Alnarabiji, M.S. and Kamil, R.N.M. and Kida, T. (2018) Synthesis of novel graphene oxide/bentonite bi-functional heterogeneous catalyst for one-pot esterification and transesterification reactions. Energy Conversion and Management, 171. pp. 1801-1812.

Al-Waked, R. and Nasif, M.S. and Mostafa, D.B. (2018) Enhancing the performance of energy recovery ventilators. Energy Conversion and Management, 171. pp. 196-210.

Al-hasani, A. and Hakimi, M.H. and Saaid, I.M. and Salim, A.M.A. and Mahat, S.Q.A. and Ahmed, A.A. and Umar, A.A.B. (2018) Reservoir characteristics of the Kuhlan sandstones from Habban oilfield in the Sabatayn Basin, Yemen and their relevance to reservoir rock quality and petroleum accumulation. Journal of African Earth Sciences, 145. pp. 131-147.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Mellon, N. and Keong, L.K. (2018) Adsorption of pure and predicted binary (CO2:CH4) mixtures on 13X-Zeolite: Equilibrium and kinetic properties at offshore conditions. Microporous and Mesoporous Materials, 267. pp. 221-234.

AbdulKareem, F.A. and Mohd. Shariff, A. and Ullah, S. and See, T.L. and Keong, L.K. and Mellon, N. (2018) Adsorption performance of 5A molecular sieve zeolite in water vapor�binary gas environment: Experimental and modeling evaluation. Journal of Industrial and Engineering Chemistry, 64. pp. 173-187.

Ahmad, F. and Draz, M.U. and Yang, S.-C. (2018) Causality nexus of exports, FDI and economic growth of the ASEAN5 economies: evidence from panel data analysis. Journal of International Trade and Economic Development, 27 (6). pp. 685-700.

Abdalsalam M, E. and Yusoff, M.Z. and Mahmoud, D. and Malik, A.S. and Bahloul, M.R. (2018) Discrimination of four class simple limb motor imagery movements for brain�computer interface. Biomedical Signal Processing and Control, 44. pp. 181-190.

Ajab, H. and Dennis, J.O. and Abdullah, M.A. (2018) Synthesis and characterization of cellulose and hydroxyapatite-carbon electrode composite for trace plumbum ions detection and its validation in blood serum. International Journal of Biological Macromolecules, 113. pp. 376-385.

Abdul Aziz, N.H. and Ibrahim, Z. and Ab Aziz, N.A. and Mohamad, M.S. and Watada, J. (2018) Single-solution Simulated Kalman Filter algorithm for global optimisation problems. Sadhana - Academy Proceedings in Engineering Sciences, 43 (7).

Adnan, N. and Md Nordin, S. and Hadi Amini, M. and Langove, N. (2018) What make consumer sign up to PHEVs? Predicting Malaysian consumer behavior in adoption of PHEVs. Transportation Research Part A: Policy and Practice, 113. pp. 259-278.

Al-Mutarreb, A.M. and Jufar, S.R. and Abdulelah, H. and Padmanabhan, E. and Mostafa, G. and Ahmed, M. (2018) The Influence of shales characteristics on CO2 adsorption behaviour under sub-critical conditions. IOP Conference Series: Earth and Environmental Science, 164 (1).

Ani, C. and Norzaimi, M. and Kamaruddin and Shahrul and Azid, A. and Ishak (2018) Analysis of the effective production Kanban size with triggering system for achieving just-in-time (JIT) production. Proceedings - 2018 4th International Conference on Control, Automation and Robotics, ICCAR 2018. pp. 316-320.

Altaf, K. and Qayyum, J.A. and Rani, A.M.A. and Ahmad, F. and Megat-Yusoff, P.S.M. and Baharom, M. and Aziz, A.R.A. and Jahanzaib, M. and German, R.M. (2018) Performance analysis of enhanced 3D printed polymer molds for metal injection molding process. Metals, 8 (6).

Ahmad, A. and Lajis, M.A. and Shamsudin, S. and Yusuf, N.K. (2018) Conjectured the behaviour of a recycled metal matrix composite (MMC-AlR) developed through hot press forging by means of 3D FEM simulation. Materials, 11 (6).

Albahri, T.A. and Khor, C.S. and Elsholkami, M. and Elkamel, A. (2018) Optimal Design of Petroleum Refinery Configuration Using a Model-Based Mixed-Integer Programming Approach with Practical Approximation. Industrial and Engineering Chemistry Research, 57 (22). pp. 7555-7565.

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H.B. and Sebastian, P. and Saad, N.B. and Ibrahim, R.B. and Dass, S.C. (2018) Optimizing Visual Sensor Coverage Overlaps for Multiview Surveillance Systems. IEEE Sensors Journal, 18 (11). pp. 4544-4552.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2018) Physical properties of the rubberized interlocking masonry brick. International Journal of Civil Engineering and Technology, 9 (6). pp. 656-664.

Al-Mutarreb, A. and Jufar, S.R. and Abdulelah, H. and Padmanabhan, E. (2018) Influence of water immersion on pore system and methane desorption of shales: A case study of batu gajah and kroh shale formations in Malaysia. Energies, 11 (6).

Adham Adnan, M. and Kee, K.-E. and Raja, P.B. and Ismail, M.C. and Kakooei, S. (2018) Influence of Heat Treatment on the Corrosion of Carbon Steel in Environment Containing Carbon Dioxide and Acetic Acid. IOP Conference Series: Materials Science and Engineering, 370 (1).

Aslam, M.Z. and Jeoti, V. and Karuppanan, S. and Malik, A.F. and Iqbal, A. (2018) FEM analysis of sezawa mode SAW sensor for VOC based on CMOS compatible AlN/SiO2/Si multilayer structure. Sensors (Switzerland), 18 (6).

Ahmad, F. and Zulkurnain, E.S.B. and Ullah, S. and Amir, N. (2018) Effects of nano-sized boron nitride on thermal decomposition and water resistance behaviour of epoxy-based intumescent coating. Journal of Analytical and Applied Pyrolysis, 132. pp. 171-183.

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Anwaar Asghar, H.M. and Bhattacharjee, S. (2018) Green synthesis of stabilized spherical shaped gold nanoparticles using novel aqueous Elaeis guineensis (oil palm) leaves extract. Journal of Molecular Structure, 1159. pp. 167-173.

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Asghar, H.M.A. and Bhattacharjee, S. (2018) Effect of volume of gold chloroauric acid on size, shape and stability of biosynthesized AuNPs using aqueous Elaeis guineensis (oil palm) leaves extract. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5135-5145.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Dreisbach, F. and Keong, L.K. and Mellon, N. and Garg, S. (2018) Experimental measurements and modeling of supercritical CO2 adsorption on 13X and 5A zeolites. Journal of Natural Gas Science and Engineering, 50. pp. 115-127.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Keong, L.K. and Mellon, N. (2018) Total and partial uptakes of multicomponent vapor-gas mixtures on 13X zeolite at 343K: Experimental and modeling study. Microporous and Mesoporous Materials, 258. pp. 95-113.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Mellon, N. and Keong, L.K. (2018) Adsorption of pure and predicted binary (CO2:CH4) mixtures on 13X-Zeolite: Equilibrium and kinetic properties at offshore conditions. Microporous and Mesoporous Materials, 267. pp. 221-234.

AbdulKareem, F.A. and Mohd. Shariff, A. and Ullah, S. and See, T.L. and Keong, L.K. and Mellon, N. (2018) Adsorption performance of 5A molecular sieve zeolite in water vapor�binary gas environment: Experimental and modeling evaluation. Journal of Industrial and Engineering Chemistry, 64. pp. 173-187.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Dreisbach, F. and Keong, L.K. and Mellon, N. and Garg, S. (2018) Experimental measurements and modeling of supercritical CO2 adsorption on 13X and 5A zeolites. Journal of Natural Gas Science and Engineering, 50. pp. 115-127.

Aleem, W. and Mellon, N. (2018) Model for the prediction of separation profile of oil-in-water emulsion. Journal of Dispersion Science and Technology, 39 (1). pp. 8-17.

Azizan, M.T. and Mellon, N. and Ramli, R.M. and Yusup, S. (2018) Improving teamwork skills and enhancing deep learning via development of board game using cooperative learning method in Reaction Engineering course. Education for Chemical Engineers, 22. pp. 1-13.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Keong, L.K. and Mellon, N. (2018) Total and partial uptakes of multicomponent vapor-gas mixtures on 13X zeolite at 343K: Experimental and modeling study. Microporous and Mesoporous Materials, 258. pp. 95-113.

Athar, M. and Shariff, A.M. and Buang, A. and Zaini, D. (2018) Integrated safety and process optimization approach for ammonia synthesis loop. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5074-5085.

Ahmad, A. and Bhat, A.H. and Buang, A. (2018) Enhanced biosorption of transition metals by living Chlorella vulgaris immobilized in Ca-alginate beads. Environmental Technology (United Kingdom). pp. 1-17.

Ahmad, A. and Bhat, A.H. and Buang, A. (2018) Biosorption of transition metals by freely suspended and Ca-alginate immobilised with Chlorella vulgaris: Kinetic and equilibrium modeling. Journal of Cleaner Production, 171. pp. 1361-1375.

Aftab, A. and M. Shariff, A. and Garg, S. and Lal, B. and Shaikh, M.S. and Faiqa, N. (2018) Solubility of CO2 in aqueous sodium β-alaninate: Experimental study and modeling using Kent Eisenberg model. Chemical Engineering Research and Design, 131. pp. 385-392.

Ali, M. and Yaacob, R.A.I.R. and Endut, M.N.A.-A. and Sulam, M. (2018) The influence of contents utility on students' use of social media. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 93-110.

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Anwaar Asghar, H.M. and Bhattacharjee, S. (2018) Green synthesis of stabilized spherical shaped gold nanoparticles using novel aqueous Elaeis guineensis (oil palm) leaves extract. Journal of Molecular Structure, 1159. pp. 167-173.

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Asghar, H.M.A. and Bhattacharjee, S. (2018) Effect of volume of gold chloroauric acid on size, shape and stability of biosynthesized AuNPs using aqueous Elaeis guineensis (oil palm) leaves extract. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5135-5145.

Anjum, H. and Obaid, M.A. and Shamim, M.Y. and Murugesan, T. (2018) Adsorption of Benzene by "green" functionalization of Montmorillonite. MATEC Web of Conferences, 150.

AbdulKareem, Firas A and Shariff, Azmi Mohd and Ullah, Sami and See, Tan Lian and Keong, Lau Kok and Mellon, Nurhayati (2018) Adsorption performance of 5A molecular sieve zeolite in water vapor—binary gas environment: Experimental and modeling evaluation. Journal of Industrial and Engineering Chemistry, 64. pp. 173-187.

Ahmad, Faizan and Keong, Lau Kok and Shariff, Azmi Mohd (2018) Parameters prediction and simulation of hollow fiber membrane system.

Ahmad, Tausif and Bustam, Mohamad Azmi and Irfan, Muhammad and Moniruzzaman, Muhammad and Asghar, Hafiz Muhammad Anwaar and Bhattacharjee, Sekhar (2018) Green synthesis of stabilized spherical shaped gold nanoparticles using novel aqueous Elaeis guineensis (oil palm) leaves extract. Journal of Molecular Structure, 1159. pp. 167-173.

Ahmad, T and Bustam, MA and Irfan, M and Moniruzzaman, M and Asghar, HMA and Bhattacharjee, S (2018) Quantitative growth evolution of gold nanoparticles synthesized using aqueous Elaeis guineensis (oil palm) leaves extract. Materials Chemistry and Physics, 220. pp. 240-248.

Alam, Md Zahangir and Elgharbawy, Amal Ahmed and Moniruzzaman, Mohammed and Kabbashi, Nassereldeen Ahmed and Jamal, Parveen (2018) Factors Affecting the in-Situ Hydrolysis of Empty Fruit Bunches in Ionic Liquid Compatible Cellulase System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 52 (1). pp. 22-32.

Ahmad, T and Bustam, MA and Irfan, M and Moniruzzaman, M and Asghar, HMA and Bhattacharjee, S (2018) Effect of volume of gold chloroauric acid on size, shape and stability of biosynthesized AuNPs using aqueous Elaeis guineensis (oil palm) leaves extract. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5135-5145.

Al-Shargie, Fares and Tang, Tong Boon and Badruddin, Nasreen and Kiguchi, Masashi (2018) Towards multilevel mental stress assessment using SVM with ECOC: an EEG approach. Medical & biological engineering & computing, 56. pp. 125-136.

B

Babiker, Mohammed Elamen and A. Aziz, A Rashid and Heikal, Morgan and Yusup, Suzana (2018) Gasification of Date Palm (Phoenix dactylifera) Seeds. Alternative Fuels for Compression Ignition Engines. pp. 65-79.

Bashiri, Robabeh and Mohamed, Norani Muti and Suhaimi, Nur Amirah and Shahid, Muhammad Umair and Kait, Chong Fai and Sufian, Suriati and Khatani, Mehboob and Mumtaz, Asad (2018) Photoelectrochemical water splitting with tailored TiO2/SrTiO3@ g-C3N4 heterostructure nanorod in photoelectrochemical cell. Diamond and Related Materials, 85. pp. 5-12.

Basit, Abdul and Siwayanan, Parthiban and KuShaari, KuZilati and Keong, Lau Kok and Azeem, Babar (2018) An investigation on dissolutive wetting of porous urea surface. The Canadian Journal of Chemical Engineering, 96 (12). pp. 2690-2699.

Bahari, N.I.S. and Ahmad, A. and Aboobaider, B. and Bin Razali, M.F. and Sakidin, H. and Isa, M.S.M. and Ananta, G.P. and Sari, Y.A. and Sari, N.A. (2018) Remote sensing data restoration to compensate for haze effect. Journal of Theoretical and Applied Information Technology, 96 (1). pp. 118-126.

Baig, Z. and Mamat, O. and Mustapha, M. (2018) Recent Progress on the Dispersion and the Strengthening Effect of Carbon Nanotubes and Graphene-Reinforced Metal Nanocomposites: A Review. Critical Reviews in Solid State and Materials Sciences, 43 (1). pp. 1-46.

Bala, N. and Kamaruddin, I. and Napiah, M. and Danlami, N. (2018) Polyethylene polymer modified bitumen: Process optimization and modeling of linear viscoelastic rheological properties using response surface methodology. Journal of Engineering and Applied Sciences, 13 (9). pp. 2818-2827.

Bashiri, R. and Mohamed, N.M. and Suhaimi, N.A. and Shahid, M.U. and Kait, C.F. and Sufian, S. and Khatani, M. and Mumtaz, A. (2018) Photoelectrochemical water splitting with tailored TiO2/SrTiO3@g-C3N4 heterostructure nanorod in photoelectrochemical cell. Diamond and Related Materials, 85. pp. 5-12.

Baheta, A.T. and Oumer, A.N. and Hailegiorgis, S.M. (2018) Analysing the thermal performance of heat pipe using copper nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 149-155.

Bala, N. and Napiah, M. and Kamaruddin, I. and Danlami, N. (2018) Optimization of Nanocomposite Modified Asphalt Mixtures Fatigue Life using Response Surface Methodology. IOP Conference Series: Earth and Environmental Science, 140 (1).

Benlamoudi, A. and Kadir, A.A. and Khodja, M. and Nuruddin, M.F. (2018) Analysis of the cement clinker produced with incorporation of petroleum sludge. Journal of Physics: Conference Series, 995 (1).

Beheshti, M. and Ismail, M.C. and Kakooei, S. and Shahrestani, S. and Mohan, G. and Zabihiazadboni, M. (2018) Influence of deposition temperature on the corrosion resistance of electrodeposited zinc-nickel alloy coatings: Einfluss der Abscheidetemperatur auf die Korrosionsbeständigkeit von galvanisch aufgebrachten Zink-Nickel-Beschichtungen. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 472-482.

Bakhoda, S. and Assadi, M.K. and Ahmadi Kandjani, S. and Al Kayiem, H.H. and Bhat, A.H. (2018) Application of Quantum Dot nanocrystal in Luminescent solar concentrators. IOP Conference Series: Materials Science and Engineering, 328 (1).

Beheshti, M. and Zabihiazadboni, M. and Ismail, M.C. and Kakooei, S. and Shahrestani, S. (2018) Investigation on Simultaneous Effects of Shot Peen and Austenitizing Time and Temperature on Grain Size and Microstructure of Austenitic Manganese Steel (Hadfield). IOP Conference Series: Materials Science and Engineering, 328 (1).

Balandong, R.P. and Ahmad, R.F. and Mohamad Saad, M.N. and Malik, A.S. (2018) A Review on EEG-Based Automatic Sleepiness Detection Systems for Driver. IEEE Access, 6. pp. 22908-22919.

Bong, Y.C. and Oh, P.C. and Chew, T.L. (2018) The effect of amine substituent chain length on POSS/Polysulfone mixed matrix membrane. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3494-3504.

Baioumy, H. and Ahmed Salim, A.M. and Arifin, M.H. and Akmal Anuar, M.N. and Musa, A.A. (2018) Geochemical characteristics of the Paleogene-Neogene coals and black shales from Malaysia: Implications for their origin and hydrocarbon potential. Journal of Natural Gas Science and Engineering, 51. pp. 73-88.

Bashir, Y. and Ghosh, D.P. and Janjuhah, H.T. and Sum, C.W. (2018) Diffraction enhancement through pre-image processing: Applications to field data, sarawak basin, East Malaysia. Geosciences (Switzerland), 8 (2).

Bala, N. and Napiah, M. and Kamaruddin, I. (2018) Nanosilica composite asphalt mixtures performance-based design and optimisation using response surface methodology. International Journal of Pavement Engineering. pp. 1-12.

Basuwaqi, A.M. and Md Khir, M.H. and Ahmed, A.Y. and Rabih, A.A.S. and Mian, M.U. and Dennis, J.O. (2018) Effects of frequency and voltage on the output of CMOS-MEMS device. Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics, 2017-O. pp. 49-52.

Bavoh, C.B. and Nashed, O. and Khan, M.S. and Partoon, B. and Lal, B. and Sharif, A.M. (2018) The impact of amino acids on methane hydrate phase boundary and formation kinetics. Journal of Chemical Thermodynamics, 117. pp. 48-53.

Bala, N. and Napiah, M. and Kamaruddin, I. (2018) Influence of nanosilica on moisture resistance of polymer modified bitumens. Petroleum Science and Technology, 36 (3). pp. 244-250.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Sarfraz, M. and Haider, S. (2018) An efficient approach to address issues of graphene nanoplatelets (GNPs) incorporation in aluminium powders and their compaction behaviour. Metals, 8 (2).

Bataee, M. and Irawan, S. (2018) Porosity and permeability alteration around wellbore during injection process. International Journal of Geomechanics, 18 (2).

Beheshti, M. and Ismail, M.C. and Kakooei, S. and Shahrestani, S. and Mohan, G. and Zabihiazadboni, M. (2018) Influence of deposition temperature on the corrosion resistance of electrodeposited zinc-nickel alloy coatings: Einfluss der Abscheidetemperatur auf die Korrosionsbeständigkeit von galvanisch aufgebrachten Zink-Nickel-Beschichtungen. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 472-482.

Beheshti, M. and Zabihiazadboni, M. and Ismail, M.C. and Kakooei, S. and Shahrestani, S. (2018) Investigation on Simultaneous Effects of Shot Peen and Austenitizing Time and Temperature on Grain Size and Microstructure of Austenitic Manganese Steel (Hadfield). IOP Conference Series: Materials Science and Engineering, 328 (1).

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Munir, K.S. and Sarfraz, M. (2018) Investigation of tip sonication effects on structural quality of graphene nanoplatelets (GNPs) for superior solvent dispersion. Ultrasonics Sonochemistry, 45. pp. 133-149.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Ali, S. and Sarfraz, M. (2018) Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear. International Journal of Minerals, Metallurgy and Materials, 25 (6). pp. 704-715.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Sarfraz, M. and Haider, S. (2018) An efficient approach to address issues of graphene nanoplatelets (GNPs) incorporation in aluminium powders and their compaction behaviour. Metals, 8 (2).

Baig, Z. and Mamat, O. and Mustapha, M. (2018) Recent Progress on the Dispersion and the Strengthening Effect of Carbon Nanotubes and Graphene-Reinforced Metal Nanocomposites: A Review. Critical Reviews in Solid State and Materials Sciences, 43 (1). pp. 1-46.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Munir, K.S. and Sarfraz, M. (2018) Investigation of tip sonication effects on structural quality of graphene nanoplatelets (GNPs) for superior solvent dispersion. Ultrasonics Sonochemistry, 45. pp. 133-149.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Ali, S. and Sarfraz, M. (2018) Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear. International Journal of Minerals, Metallurgy and Materials, 25 (6). pp. 704-715.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Sarfraz, M. and Haider, S. (2018) An efficient approach to address issues of graphene nanoplatelets (GNPs) incorporation in aluminium powders and their compaction behaviour. Metals, 8 (2).

Baig, Z. and Mamat, O. and Mustapha, M. (2018) Recent Progress on the Dispersion and the Strengthening Effect of Carbon Nanotubes and Graphene-Reinforced Metal Nanocomposites: A Review. Critical Reviews in Solid State and Materials Sciences, 43 (1). pp. 1-46.

Ban, S. and Pao, W. and Nasif, M.S. (2018) Numerical simulation of two-phase flow regime in horizontal pipeline and its validation. International Journal of Numerical Methods for Heat and Fluid Flow.

Bhatti, M.S. and Tang, T.B. and Chen, H.C. (2018) Ocular Blood Flow in Rabbits under Deep Anesthesia: A Real-Time Measurement Technique and Its Application in Characterizing Retinal Ischemia. Scientific Reports, 8 (1).

Bilad, M.R. and Qing, L. and Fane, A.G. (2018) Non-linear least-square fitting method for characterization of forward osmosis membrane. Journal of Water Process Engineering, 25. pp. 70-80.

Bilad, M.R. and Azizo, A.S. and Wirzal, M.D.H. and Jia Jia, L. and Putra, Z.A. and Nordin, N.A.H.M. and Mavukkandy, M.O. and Jasni, M.J.F. and Yusoff, A.R.M. (2018) Tackling membrane fouling in microalgae filtration using nylon 6,6 nanofiber membrane. Journal of Environmental Management, 223. pp. 23-28.

Ban, S. and Pao, W. and Nasif, M.S. (2018) Numerical simulation of two-phase flow regime in horizontal pipeline and its validation. International Journal of Numerical Methods for Heat and Fluid Flow.

Bala, N. and Napiah, M. (2018) Fatigue life and rutting performance modelling of nanosilica/polymer composite modified asphalt mixtures using Weibull distribution. International Journal of Pavement Engineering. pp. 1-10.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Munir, K.S. and Sarfraz, M. (2018) Investigation of tip sonication effects on structural quality of graphene nanoplatelets (GNPs) for superior solvent dispersion. Ultrasonics Sonochemistry, 45. pp. 133-149.

Bhatti, A.A. and Raza, A. and Mahmood, S.M. and Gholami, R. (2018) Assessing the application of miscible CO2 flooding in oil reservoirs: a case study from Pakistan. Journal of Petroleum Exploration and Production Technology. pp. 1-17.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. (2018) Fractional Order Set-point Weighted PID Controller for pH Neutralization Process Using Accelerated PSO Algorithm. Arabian Journal for Science and Engineering, 43 (6). pp. 2687-2701.

Bashir, Y. and Ghosh, D.P. and Sum, C.W. (2018) Influence of seismic diffraction for high-resolution imaging: applications in offshore Malaysia. Acta Geophysica, 66 (3). pp. 305-316.

Beer, M.I. and Hassan, M.F. (2018) Adaptive security architecture for protecting RESTful web services in enterprise computing environment. Service Oriented Computing and Applications, 12 (2). pp. 111-121.

Basri, W.N.F.W. and Lim, J.-W. and Isa, M.H. and Baloo, L. and Uemura, Y. and Bashir, M.J.K. and Lee, Y.-C. and Ching, D.L.C. (2018) Sugarcane bagasse-based adsorbent as an alternative to enhance the harvesting process of Chlorella vulgaris biomass. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 106-113.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Ali, S. and Sarfraz, M. (2018) Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear. International Journal of Minerals, Metallurgy and Materials, 25 (6). pp. 704-715.

Budiman Abdurakhman, Y. and Adi Putra, Z. and Bilad, M.R. and Md Nordin, N.A.H. and Wirzal, M.D.H. (2018) Techno-economic analysis of biodiesel production process from waste cooking oil using catalytic membrane reactor and realistic feed composition. Chemical Engineering Research and Design, 134. pp. 564-574.

Bashiri, R. and Mohamed, N.M. and Suhaimi, N.A. and Shahid, M.U. and Kait, C.F. and Sufian, S. and Khatani, M. and Mumtaz, A. (2018) Photoelectrochemical water splitting with tailored TiO2/SrTiO3@g-C3N4 heterostructure nanorod in photoelectrochemical cell. Diamond and Related Materials, 85. pp. 5-12.

Baheta, A.T. and Oumer, A.N. and Hailegiorgis, S.M. (2018) Analysing the thermal performance of heat pipe using copper nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 149-155.

Bong, Y.C. and Oh, P.C. and Chew, T.L. (2018) The effect of amine substituent chain length on POSS/Polysulfone mixed matrix membrane. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3494-3504.

Baioumy, H. and Ahmed Salim, A.M. and Arifin, M.H. and Akmal Anuar, M.N. and Musa, A.A. (2018) Geochemical characteristics of the Paleogene-Neogene coals and black shales from Malaysia: Implications for their origin and hydrocarbon potential. Journal of Natural Gas Science and Engineering, 51. pp. 73-88.

Bala, N. and Kamaruddin, I. and Napiah, M. and Danlami, N. (2018) Polyethylene polymer modified bitumen: Process optimization and modeling of linear viscoelastic rheological properties using response surface methodology. Journal of Engineering and Applied Sciences, 13 (9). pp. 2818-2827.

Bhatti, M.S. and Tang, T.B. and Chen, H.C. (2018) Ocular Blood Flow in Rabbits under Deep Anesthesia: A Real-Time Measurement Technique and Its Application in Characterizing Retinal Ischemia. Scientific Reports, 8 (1).

Bilad, M.R. and Qing, L. and Fane, A.G. (2018) Non-linear least-square fitting method for characterization of forward osmosis membrane. Journal of Water Process Engineering, 25. pp. 70-80.

Bilad, M.R. and Azizo, A.S. and Wirzal, M.D.H. and Jia Jia, L. and Putra, Z.A. and Nordin, N.A.H.M. and Mavukkandy, M.O. and Jasni, M.J.F. and Yusoff, A.R.M. (2018) Tackling membrane fouling in microalgae filtration using nylon 6,6 nanofiber membrane. Journal of Environmental Management, 223. pp. 23-28.

Ban, S. and Pao, W. and Nasif, M.S. (2018) Numerical simulation of two-phase flow regime in horizontal pipeline and its validation. International Journal of Numerical Methods for Heat and Fluid Flow.

Bala, N. and Napiah, M. (2018) Fatigue life and rutting performance modelling of nanosilica/polymer composite modified asphalt mixtures using Weibull distribution. International Journal of Pavement Engineering. pp. 1-10.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Munir, K.S. and Sarfraz, M. (2018) Investigation of tip sonication effects on structural quality of graphene nanoplatelets (GNPs) for superior solvent dispersion. Ultrasonics Sonochemistry, 45. pp. 133-149.

Bhatti, A.A. and Raza, A. and Mahmood, S.M. and Gholami, R. (2018) Assessing the application of miscible CO2 flooding in oil reservoirs: a case study from Pakistan. Journal of Petroleum Exploration and Production Technology. pp. 1-17.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. (2018) Fractional Order Set-point Weighted PID Controller for pH Neutralization Process Using Accelerated PSO Algorithm. Arabian Journal for Science and Engineering, 43 (6). pp. 2687-2701.

Bashir, Y. and Ghosh, D.P. and Sum, C.W. (2018) Influence of seismic diffraction for high-resolution imaging: applications in offshore Malaysia. Acta Geophysica, 66 (3). pp. 305-316.

Beer, M.I. and Hassan, M.F. (2018) Adaptive security architecture for protecting RESTful web services in enterprise computing environment. Service Oriented Computing and Applications, 12 (2). pp. 111-121.

Basri, W.N.F.W. and Lim, J.-W. and Isa, M.H. and Baloo, L. and Uemura, Y. and Bashir, M.J.K. and Lee, Y.-C. and Ching, D.L.C. (2018) Sugarcane bagasse-based adsorbent as an alternative to enhance the harvesting process of Chlorella vulgaris biomass. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 106-113.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Ali, S. and Sarfraz, M. (2018) Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear. International Journal of Minerals, Metallurgy and Materials, 25 (6). pp. 704-715.

Budiman Abdurakhman, Y. and Adi Putra, Z. and Bilad, M.R. and Md Nordin, N.A.H. and Wirzal, M.D.H. (2018) Techno-economic analysis of biodiesel production process from waste cooking oil using catalytic membrane reactor and realistic feed composition. Chemical Engineering Research and Design, 134. pp. 564-574.

Bong, Y.C. and Oh, P.C. and Chew, T.L. (2018) The effect of amine substituent chain length on POSS/Polysulfone mixed matrix membrane. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3494-3504.

Budiman Abdurakhman, Y. and Adi Putra, Z. and Bilad, M.R. and Md Nordin, N.A.H. and Wirzal, M.D.H. (2018) Techno-economic analysis of biodiesel production process from waste cooking oil using catalytic membrane reactor and realistic feed composition. Chemical Engineering Research and Design, 134. pp. 564-574.

Bavoh, C.B. and Nashed, O. and Khan, M.S. and Partoon, B. and Lal, B. and Sharif, A.M. (2018) The impact of amino acids on methane hydrate phase boundary and formation kinetics. Journal of Chemical Thermodynamics, 117. pp. 48-53.

Bilad, M.R. and Azizo, A.S. and Wirzal, M.D.H. and Jia Jia, L. and Putra, Z.A. and Nordin, N.A.H.M. and Mavukkandy, M.O. and Jasni, M.J.F. and Yusoff, A.R.M. (2018) Tackling membrane fouling in microalgae filtration using nylon 6,6 nanofiber membrane. Journal of Environmental Management, 223. pp. 23-28.

Budiman Abdurakhman, Y. and Adi Putra, Z. and Bilad, M.R. and Md Nordin, N.A.H. and Wirzal, M.D.H. (2018) Techno-economic analysis of biodiesel production process from waste cooking oil using catalytic membrane reactor and realistic feed composition. Chemical Engineering Research and Design, 134. pp. 564-574.

Basit, Abdul and Siwayanan, Parthiban and KuShaari, KuZilati and Keong, Lau Kok and Azeem, Babar (2018) An investigation on dissolutive wetting of porous urea surface. The Canadian Journal of Chemical Engineering, 96 (12). pp. 2690-2699.

Bong, YC and Oh, PC and Chew, TL (2018) The effect of amine substituent chain length on POSS/Polysulfone mixed matrix membrane. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3494-3504.

Butt, Fatima Imran and Muhammad, Nawshad and Hamid, Almas and Moniruzzaman, Muhammad and Sharif, Faiza (2018) Recent progress in the utilization of biosynthesized polyhydroxyalkanoates for biomedical applications—review. International journal of biological macromolecules, 120. pp. 1294-1305.

Bhatti, Mehwish Saba and Tang, Tong Boon and Chen, Hui Cheng (2018) Ocular blood flow in rabbits under deep anesthesia: a real-time measurement technique and its application in characterizing retinal ischemia. Scientific reports, 8 (1). p. 5713.

C

Chai, M.T. and Saad, M.N.M. and Kamel, N. and Malik, A.S. (2018) EEG analysis of color effects using effective connectivity based on graph theory during a multimedia learning task. 2017 IEEE Life Sciences Conference, LSC 2017, 2018-J. pp. 99-102.

Chai, K. and Liew, M.S. and Lee, H.E. (2018) Numerical wave tank modelling of regular waves propagation using OpenFOAM. 3rd International Conference on Power Generation Systems and Renewable Energy Technologies, PGSRET 2017, 2018-J. pp. 1-6.

Chern-Tong, H. and Aziz, I.A. (2018) A Performance Evaluation of Chi-Square Pruning Techniques in Class Association Rules Optimization. Advances in Intelligent Systems and Computing, 662. pp. 195-203.

Chong, W.K. and Drieberg, M. and Jeoti, V. (2018) Mitigating false blocking problem in wireless ad hoc networks. Telecommunication Systems, 67 (1). pp. 31-46.

Chan, Y.H. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Liquefaction of palm kernel shell to bio-oil using sub- and supercritical water: An overall kinetic study. Journal of the Energy Institute.

Cheah, K.W. and Yusup, S. and Kyriakou, G. and Ameen, M. and Taylor, M.J. and Nowakowski, D.J. and Bridgwater, A.V. and Uemura, Y. (2018) In-situ hydrogen generation from 1,2,3,4-tetrahydronaphthalene for catalytic conversion of oleic acid to diesel fuel hydrocarbons: Parametric studies using Response Surface Methodology approach. International Journal of Hydrogen Energy.

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. (2018) Flow start-up and transportation of waxy crude oil in pipelines-A review. Journal of Non-Newtonian Fluid Mechanics, 251. pp. 69-87.

Chin, J.F. and Prakash, J. and Kamaruddin, S. and Tan, M.C.L. (2018) Automating computer simulation and statistical analysis in production planning and control research. International Journal of Computers and Applications, 40 (1). pp. 25-41.

Cheah, J.-H. and Memon, M.A. and Chuah, F. and Ting, H. and Ramayah, T. (2018) Assessing reflective models in marketing research: A comparison between pls and plsc estimates. International Journal of Business and Society, 19 (1). pp. 139-160.

Choudhury, B. and Chatterjee, P.K. and Habib, K. and Saha, B.B. (2018) Performance Investigation of a Solar Heat Driven Adsorption Chiller under Two Different Climatic Conditions. Journal of The Institution of Engineers (India): Series C, 99 (3). pp. 347-354.

Cruz-Mejia, O. and Marmolejo, J.A. and Vasant, P. (2018) Lead time performance in a internet product delivery supply chain with automatic consolidation. Journal of Ambient Intelligence and Humanized Computing, 9 (3). pp. 867-874.

Cheab, S. and Wong, P.W. and Soeung, S. (2018) Design of multi-band filters using parallel connected topology. Radioengineering, 27 (1). pp. 186-192.

Cv, A. and Kannan, R. and Lei, H.J. and Setiawan, J.D. (2018) Design studies of inner and outer embedded Permanent Magnet for hybrid electric vehicles. MATEC Web of Conferences, 159.

Chee, C.-H. and Jaafar, J. and Aziz, I.A. and Hasan, M.H. and Yeoh, W. (2018) Algorithms for frequent itemset mining: a literature review. Artificial Intelligence Review. pp. 1-19.

Chan, Y.H. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Optimization of hydrothermal liquefaction of palm kernel shell and consideration of supercritical carbon dioxide mediation effect. Journal of Supercritical Fluids, 133. pp. 640-646.

Che-Ani, M.N. and Kamaruddin, S. and Azid, I.A. (2018) Towards just-in-time (JIT) production system through enhancing part preparation process. IEEE International Conference on Industrial Engineering and Engineering Management, 2017-D. pp. 669-673.

Chen, X. and Thornton, S.F. and Pao, W. (2018) Mathematical model of coupled dual chemical osmosis based on mixture-coupling theory. International Journal of Engineering Science, 129. pp. 145-155.

Chan, Y.H. and Yusup, S. and Quitain, A.T. and Chai, Y.H. and Uemura, Y. and Loh, S.K. (2018) Extraction of palm kernel shell derived pyrolysis oil by supercritical carbon dioxide: Evaluation and modeling of phenol solubility. Biomass and Bioenergy, 116. pp. 106-112.

Chen, X. and Thornton, S.F. and Pao, W. (2018) Mathematical model of coupled dual chemical osmosis based on mixture-coupling theory. International Journal of Engineering Science, 129. pp. 145-155.

Chowdhury, M.R. and Moshikur, R.M. and Wakabayashi, R. and Tahara, Y. and Kamiya, N. and Moniruzzaman, M. and Goto, M. (2018) Ionic-Liquid-Based Paclitaxel Preparation: A New Potential Formulation for Cancer Treatment. Molecular Pharmaceutics, 15 (6). pp. 2484-2488.

Choudhury, B. and Chatterjee, P.K. and Habib, K. and Saha, B.B. (2018) Performance Investigation of a Solar Heat Driven Adsorption Chiller under Two Different Climatic Conditions. Journal of The Institution of Engineers (India): Series C, 99 (3). pp. 347-354.

Cruz-Mejia, O. and Marmolejo, J.A. and Vasant, P. (2018) Lead time performance in a internet product delivery supply chain with automatic consolidation. Journal of Ambient Intelligence and Humanized Computing, 9 (3). pp. 867-874.

Chern-Tong, H. and Aziz, I.A. (2018) A Performance Evaluation of Chi-Square Pruning Techniques in Class Association Rules Optimization. Advances in Intelligent Systems and Computing, 662. pp. 195-203.

Chong, W.K. and Drieberg, M. and Jeoti, V. (2018) Mitigating false blocking problem in wireless ad hoc networks. Telecommunication Systems, 67 (1). pp. 31-46.

Chan, Y.H. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Liquefaction of palm kernel shell to bio-oil using sub- and supercritical water: An overall kinetic study. Journal of the Energy Institute.

Cheah, K.W. and Yusup, S. and Kyriakou, G. and Ameen, M. and Taylor, M.J. and Nowakowski, D.J. and Bridgwater, A.V. and Uemura, Y. (2018) In-situ hydrogen generation from 1,2,3,4-tetrahydronaphthalene for catalytic conversion of oleic acid to diesel fuel hydrocarbons: Parametric studies using Response Surface Methodology approach. International Journal of Hydrogen Energy.

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. (2018) Flow start-up and transportation of waxy crude oil in pipelines-A review. Journal of Non-Newtonian Fluid Mechanics, 251. pp. 69-87.

Chin, J.F. and Prakash, J. and Kamaruddin, S. and Tan, M.C.L. (2018) Automating computer simulation and statistical analysis in production planning and control research. International Journal of Computers and Applications, 40 (1). pp. 25-41.

Cheah, J.-H. and Memon, M.A. and Chuah, F. and Ting, H. and Ramayah, T. (2018) Assessing reflective models in marketing research: A comparison between pls and plsc estimates. International Journal of Business and Society, 19 (1). pp. 139-160.

Chan, Y.H. and Yusup, S. and Quitain, A.T. and Chai, Y.H. and Uemura, Y. and Loh, S.K. (2018) Extraction of palm kernel shell derived pyrolysis oil by supercritical carbon dioxide: Evaluation and modeling of phenol solubility. Biomass and Bioenergy, 116. pp. 106-112.

Chen, X. and Thornton, S.F. and Pao, W. (2018) Mathematical model of coupled dual chemical osmosis based on mixture-coupling theory. International Journal of Engineering Science, 129. pp. 145-155.

Chowdhury, M.R. and Moshikur, R.M. and Wakabayashi, R. and Tahara, Y. and Kamiya, N. and Moniruzzaman, M. and Goto, M. (2018) Ionic-Liquid-Based Paclitaxel Preparation: A New Potential Formulation for Cancer Treatment. Molecular Pharmaceutics, 15 (6). pp. 2484-2488.

Chowdhury, Md Raihan and Moshikur, Rahman Md and Wakabayashi, Rie and Tahara, Yoshiro and Kamiya, Noriho and Moniruzzaman, Muhammad and Goto, Masahiro (2018) Ionic-liquid-based paclitaxel preparation: a new potential formulation for cancer treatment. Molecular pharmaceutics, 15 (6). pp. 2484-2488.

D

Daneshfozoun, S and Abdullah, MA and Afzaal, M and Asadpoor, R and Abdullah, B (2018) Kinetics, isotherms and thermodynamics of heavy metal ions sorption onto raw and agro-based magnetic biosorbent. Research and advances: environmental sciences, 2018 (1). pp. 27-42.

Daneshpajouh, H. and Delisle, P. and Boisson, J.-C. and Krajecki, M. and Zakaria, N. (2018) Parallel batch self-organizing map on graphics processing unit using CUDA. Communications in Computer and Information Science, 796. pp. 87-100.

Ding, S.H. and Chew, T.L. and Oh, P.C. and Ahmad, A.L. and Jawad, Z.A. (2018) Preparation of mixed matrix membrane using cellulose acetate incorporated with synthesized KIT-6 silica. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3505-3514.

Din, I.U. and Shaharun, M.S. and Naeem, A. and Tasleem, S. and Rafie Johan, M. (2018) Carbon nanofibers based copper/zirconia catalysts for carbon dioxide hydrogenation to methanol: Effect of copper concentration. Chemical Engineering Journal, 334. pp. 619-629.

Din, I.U. and Shaharun, M.S. and Naeem, A. and Tasleem, S. and Rafie Johan, M. (2018) Carbon nanofibers based copper/zirconia catalysts for carbon dioxide hydrogenation to methanol: Effect of copper concentration. Chemical Engineering Journal, 334. pp. 619-629.

Dong, Y. and Shah, S.N. and Pranesh, M. and Prokkola, H. and Kärkkäinen, J. and Leveque, J.-M. and Lassi, U. and Lethesh, K.C. (2018) Azepanium based protic ionic liquids: Synthesis, thermophysical properties and COSMO-RS study. Journal of Molecular Liquids, 264. pp. 24-31.

Ding, S.H. and Chew, T.L. and Oh, P.C. and Ahmad, A.L. and Jawad, Z.A. (2018) Preparation of mixed matrix membrane using cellulose acetate incorporated with synthesized KIT-6 silica. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3505-3514.

Daneshpajouh, H. and Delisle, P. and Boisson, J.-C. and Krajecki, M. and Zakaria, N. (2018) Parallel batch self-organizing map on graphics processing unit using CUDA. Communications in Computer and Information Science, 796. pp. 87-100.

Dong, Y. and Shah, S.N. and Pranesh, M. and Prokkola, H. and Kärkkäinen, J. and Leveque, J.-M. and Lassi, U. and Lethesh, K.C. (2018) Azepanium based protic ionic liquids: Synthesis, thermophysical properties and COSMO-RS study. Journal of Molecular Liquids, 264. pp. 24-31.

Ding, S.H. and Chew, T.L. and Oh, P.C. and Ahmad, A.L. and Jawad, Z.A. (2018) Preparation of mixed matrix membrane using cellulose acetate incorporated with synthesized KIT-6 silica. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3505-3514.

Ding, SH and Chew, TL and Oh, PC and Ahmad, AL and Jawad, ZA (2018) Preparation of mixed matrix membrane using cellulose acetate incorporated with synthesized KIT-6 silica. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3505-3514.

E

El Adawy, Mohammed and Heikal, MR and A Aziz, A Rashid and Munir, S and Siddiqui, MI (2018) Effect of boost pressure on the in-cylinder tumble-motion of GDI engine under steady-state conditions using Stereoscopic-PIV. Journal of Applied Fluid Mechanics, 11 (3). pp. 733-742.

EL-Adawy, Mohammed and Heikal, MR and A Aziz, A Rashid and Siddiqui, MI and Abdul Wahhab, Hasanain A and Hasanain A, Hasanain A (2018) Tumble Motion Evolution for GDI Engine Using Particle Image Velocimetry (PIV). Journal of Mechanical Engineering (JMechE) (1). pp. 191-201.

Elgharbawy, A.A. and Riyadi, F.A. and Alam, M.Z. and Moniruzzaman, M. (2018) Ionic liquids as a potential solvent for lipase-catalysed reactions: A review. Journal of Molecular Liquids, 251. pp. 150-166.

Etesami, M. and Abouzari-Lotf, E. and Ripin, A. and Mahmoud Nasef, M. and Ting, T.M. and Saharkhiz, A. and Ahmad, A. (2018) Phosphonated graphene oxide with high electrocatalytic performance for vanadium redox flow battery. International Journal of Hydrogen Energy, 43 (1). pp. 189-197.

Endut, M.N.A.-A. and Abdullah, M.R.T.L. and Yaacob, R.A.I.R. (2018) Reformulation of critical thinking in the Malaysian tertiary engineering education: An Islamic approach. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 121-136.

Ee, L.K. and Aziz, I.A. (2018) A hybrid prediction model for pipeline corrosion using Artificial Neural Network with Particle Swarm Optimization. Journal of Engineering and Applied Sciences, 13 (Specia). pp. 3131-3138.

Embong, A.M. and Yaacob, R.A.I.R. and Sabian, N.A.A. and Noor, A.B.M. and Mohamad, R. and Lahmuddin, A.H. (2018) Revealing the non-Muslim Kopitiams and the awarded Halal Signage. Journal of Engineering and Applied Sciences, 13 (1). pp. 248-253.

El Adawy, M. and Heikal, M.R. and Aziz, A.R.A. and Munir, S. and Siddiqui, M.I. (2018) Effect of boost pressure on the in-cylinder tumble- motion of GDI engine under steady-state conditions using Stereoscopic-PIV. Journal of Applied Fluid Mechanics, 11 (3). pp. 733-742.

Elgharbawy, A.A. and Alam, M.Z. and Moniruzzaman, M. and Kabbashi, N.A. and Jamal, P. (2018) Chemical and structural changes of pretreated empty fruit bunch (EFB) in ionic liquid-cellulase compatible system for fermentability to bioethanol. 3 Biotech, 8 (5).

Eshak, M.I. and Ahmad, R. and Sarlan, A. (2018) A preliminary study on hybrid sentiment model for customer purchase intention analysis in socialcommerce. 2017 IEEE Conference on Big Data and Analytics, ICBDA 2017, 2018-J. pp. 61-66.

Elaina, N.S. and Malik, A.S. and Shams, W.K. and Badruddin, N. and Abdullah, J.M. and Reza, M.F. (2018) Localized N20 Component of Somatosensory Evoked Magnetic Fields in Frontoparietal Brain Tumor Patients Using Noise-Normalized Approaches. Clinical Neuroradiology, 28 (2). pp. 267-281.

Elgharbawy, A.A. and Alam, M.Z. and Moniruzzaman, M. and Kabbashi, N.A. and Jamal, P. (2018) Chemical and structural changes of pretreated empty fruit bunch (EFB) in ionic liquid-cellulase compatible system for fermentability to bioethanol. 3 Biotech, 8 (5).

Endut, M.N.A.-A. and Abdullah, M.R.T.L. and Yaacob, R.A.I.R. (2018) Reformulation of critical thinking in the Malaysian tertiary engineering education: An Islamic approach. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 121-136.

Ee, L.K. and Aziz, I.A. (2018) A hybrid prediction model for pipeline corrosion using Artificial Neural Network with Particle Swarm Optimization. Journal of Engineering and Applied Sciences, 13 (Specia). pp. 3131-3138.

Embong, A.M. and Yaacob, R.A.I.R. and Sabian, N.A.A. and Noor, A.B.M. and Mohamad, R. and Lahmuddin, A.H. (2018) Revealing the non-Muslim Kopitiams and the awarded Halal Signage. Journal of Engineering and Applied Sciences, 13 (1). pp. 248-253.

El Adawy, M. and Heikal, M.R. and Aziz, A.R.A. and Munir, S. and Siddiqui, M.I. (2018) Effect of boost pressure on the in-cylinder tumble- motion of GDI engine under steady-state conditions using Stereoscopic-PIV. Journal of Applied Fluid Mechanics, 11 (3). pp. 733-742.

Elaina, N.S. and Malik, A.S. and Shams, W.K. and Badruddin, N. and Abdullah, J.M. and Reza, M.F. (2018) Localized N20 Component of Somatosensory Evoked Magnetic Fields in Frontoparietal Brain Tumor Patients Using Noise-Normalized Approaches. Clinical Neuroradiology, 28 (2). pp. 267-281.

Endut, M.N.A.-A. and Abdullah, M.R.T.L. and Yaacob, R.A.I.R. (2018) Reformulation of critical thinking in the Malaysian tertiary engineering education: An Islamic approach. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 121-136.

Elgharbawy, Amal A and Alam, Md Zahangir and Moniruzzaman, Muhammad and Kabbashi, Nassereldeen Ahmad and Jamal, Parveen (2018) Chemical and structural changes of pretreated empty fruit bunch (EFB) in ionic liquid-cellulase compatible system for fermentability to bioethanol. 3 Biotech, 8. pp. 1-15.

Elgharbawy, Amal A and Riyadi, Fatimah Azizah and Alam, Md Zahangir and Moniruzzaman, Muhammad (2018) Ionic liquids as a potential solvent for lipase-catalysed reactions: A review. Journal of Molecular Liquids, 251. pp. 150-166.

F

Fayaz, Fahim and Bahari, Mahadi B and Pham, Thong LM and Nguyen-Huy, Chinh and Setiabudi, Herma Dina and Abdullah, Bawadi and Vo, Dai-Viet N (2018) Hydrogen-Rich Syngas Production via Ethanol Dry Reforming over Rare-Earth Metal-Promoted Co-based Catalysts. Recent Advancements in Biofuels and Bioenergy Utilization. pp. 177-204.

Fayaz, Fahim and Nga, Nguyen Thi Anh and Pham, Thong Le Minh and Danh, Huong Thi and Abdullah, Bawadi and Setiabudi, Herma Dina and Vo, Dai-Viet Nguyen (2018) Hydrogen production from ethanol dry reforming over lanthania-promoted Co/Al2O3 catalyst. IIUM Engineering Journal, 19 (1). pp. 24-33.

Fong, L.K. and Bhattacharyya, E. and Md Nordin, S. (2018) Communication in real-time: ESL students' perception of "Time Out" role play. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 73-92.

Faez, K.M. and Hamdavi, S. and Rao, T.V.V.L.N. and Ya, H.H. and Mohamed, N.M. (2018) Performance analysis of grooved hydrodynamic journal bearing with multi- depth textured surface. International Journal of Vehicle Structures and Systems, 10 (2). pp. 142-145.

Fayaz, F. and Nga, N.T.A. and Pham, T.L.M. and Danh, H.T. and Abdullah, B. and Setiabudi, H.D. and Vo, D.-V.N. (2018) Hydrogen production from ethanol dry reforming over lanthania-promoted Co/Al2O3 catalyst. IIUM Engineering Journal, 19 (1). pp. 24-33.

Fazli, H. and Mohd Yassin, A.Y. and Shafiq, N. and Teo, W. (2018) Effective bond length of CFRP sheets externally bonded to concrete beams under marine environment. Construction and Building Materials, 167. pp. 726-738.

Farooq, M. and Ramli, A. and Naeem, A. and Mahmood, T. and Ahmad, S. and Humayun, M. and Islam, M.G.U. (2018) Biodiesel production from date seed oil (Phoenix dactylifera L.) via egg shell derived heterogeneous catalyst. Chemical Engineering Research and Design, 132. pp. 644-651.

Foong, F.M. and Ket, T.C. and Lee, O.B. and Abdul Aziz, A.R. (2018) Validation of Analytical Damping Ratio by Fatigue Stress Limit. IOP Conference Series: Materials Science and Engineering, 328 (1).

Fayaz, F. and Nga, N.T.A. and Pham, T.L.M. and Danh, H.T. and Abdullah, B. and Setiabudi, H.D. and Vo, D.-V.N. (2018) Hydrogen production from ethanol dry reforming over lanthania-promoted Co/Al2O3 catalyst. IIUM Engineering Journal, 19 (1). pp. 24-33.

Fazli, H. and Yassin, A.Y.M. and Shafiq, N. and Teo, W. (2018) Pull-off testing as an interfacial bond strength assessment of CFRP-concrete interface exposed to a marine environment. International Journal of Adhesion and Adhesives, 84. pp. 335-342.

Filho, W.L. and Balogun, A.-L. and Ayal, D.Y. and Bethurem, E.M. and Murambadoro, M. and Mambo, J. and Taddese, H. and Tefera, G.W. and Nagy, G.J. and Fudjumdjum, H. and Mugabe, P. (2018) Strengthening climate change adaptation capacity in Africa- case studies from six major African cities and policy implications. Environmental Science and Policy, 86. pp. 29-37.

Foroozesh, J. and Jamiolahmady, M. (2018) The physics of CO2 transfer during carbonated water injection into oil reservoirs: From non-equilibrium core-scale physics to field-scale implication. Journal of Petroleum Science and Engineering, 166. pp. 798-805.

Fong, L.K. and Bhattacharyya, E. and Md Nordin, S. (2018) Communication in real-time: ESL students' perception of "Time Out" role play. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 73-92.

Faez, K.M. and Hamdavi, S. and Rao, T.V.V.L.N. and Ya, H.H. and Mohamed, N.M. (2018) Performance analysis of grooved hydrodynamic journal bearing with multi- depth textured surface. International Journal of Vehicle Structures and Systems, 10 (2). pp. 142-145.

Fayaz, F. and Nga, N.T.A. and Pham, T.L.M. and Danh, H.T. and Abdullah, B. and Setiabudi, H.D. and Vo, D.-V.N. (2018) Hydrogen production from ethanol dry reforming over lanthania-promoted Co/Al2O3 catalyst. IIUM Engineering Journal, 19 (1). pp. 24-33.

Fazli, H. and Yassin, A.Y.M. and Shafiq, N. and Teo, W. (2018) Pull-off testing as an interfacial bond strength assessment of CFRP-concrete interface exposed to a marine environment. International Journal of Adhesion and Adhesives, 84. pp. 335-342.

Filho, W.L. and Balogun, A.-L. and Ayal, D.Y. and Bethurem, E.M. and Murambadoro, M. and Mambo, J. and Taddese, H. and Tefera, G.W. and Nagy, G.J. and Fudjumdjum, H. and Mugabe, P. (2018) Strengthening climate change adaptation capacity in Africa- case studies from six major African cities and policy implications. Environmental Science and Policy, 86. pp. 29-37.

Foroozesh, J. and Jamiolahmady, M. (2018) The physics of CO2 transfer during carbonated water injection into oil reservoirs: From non-equilibrium core-scale physics to field-scale implication. Journal of Petroleum Science and Engineering, 166. pp. 798-805.

G

Ghaedi, Hosein and Ayoub, Muhammad and Sufian, Suriati and Shariff, Azmi Mohd and Lal, Bhajan and Wilfred, Cecilia Devi (2018) Density and refractive index measurements of transition-temperature mixture (deep eutectic analogues) based on potassium carbonate with dual hydrogen bond donors for CO2 capture. The Journal of Chemical Thermodynamics, 118. pp. 147-158.

Goyal, Sonam and Shaharun, Maizatul Shima and Kait, Chong Fai and Abdullah, Bawadi and Ameen, Mariam (2018) Photoreduction of carbon dioxide to methanol over copper based zeolitic imidazolate framework-8: a new generation photocatalyst. Catalysts, 8 (12). p. 581.

Ghaedi, Hosein and Ayoub, Muhammad and Sufian, Suriati and Shariff, Azmi Mohd and Lal, Bhajan and Wilfred, Cecilia Devi (2018) Density and refractive index measurements of transition-temperature mixture (deep eutectic analogues) based on potassium carbonate with dual hydrogen bond donors for CO2 capture. The Journal of Chemical Thermodynamics, 118. pp. 147-158.

Ghaedi, Hosein and Ayoub, Muhammad and Sufian, Suriati and Hailegiorgis, Sintayehu Mekuria and Murshid, Ghulam and Khan, Saleem Nawaz (2018) Thermal stability analysis, experimental conductivity and pH of phosphonium-based deep eutectic solvents and their prediction by a new empirical equation. The Journal of Chemical Thermodynamics, 116. pp. 50-60.

Gardezi, S.J.S. and Faye, I. and Sanchez Bornot, J.M. and Kamel, N. and Hussain, M. (2018) Mammogram classification using dynamic time warping. Multimedia Tools and Applications, 77 (3). pp. 3941-3962.

Ghaheri, S. and Suhaili, M. and Sapari, N. and Momeni, M. (2018) Sedimentary architecture and depositional environment of Kudat Formation, Sabah, Malaysia. IOP Conference Series: Materials Science and Engineering, 291 (1).

Gohari, A. and Nasir Matori, A. and Yusof, K.W. and Toloue, I. and Myint, K.C. and Sholagberu, A.T. (2018) Route/Modal choice analysis and tradeoffs evaluation of the intermodal transport network of Peninsular Malaysia. Cogent Engineering, 5 (1).

Gohari, A. and Matori, A.N. and Yusof, K.W. and Toloue, I. and Sholagberu, A.T. (2018) The effect of fuel price increase on transport cost of container transport vehicles. International Journal of GEOMATE, 15 (50). pp. 174-181.

Guan, B.H. and Bin Zahari, M.H. and Lee, K.C. (2018) Effect of La3+ substitution on the structural and magnetic properties of Mn-Zn ferrite prepared by sol-gel auto-combustion method. Materials Science Forum, 916 MS. pp. 91-95.

Ghaedi, H. and Ayoub, M. and Sufian, S. and Hailegiorgis, S.M. and Murshid, G. and Khan, S.N. (2018) Thermal stability analysis, experimental conductivity and pH of phosphonium-based deep eutectic solvents and their prediction by a new empirical equation. Journal of Chemical Thermodynamics, 116. pp. 50-60.

Goscinski, A.M. and Tari, Z. and Aziz, I.A. and Alzahrani, E.J. (2018) Fog computing as a critical link between a central cloud and iot in support of fast discovery of new hydrocarbon reservoirs. Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST, 235. pp. 247-261.

Gupta, A. and Kumar, A. and Sharma, K.V. and Gupta, R. (2018) Application of High Conductive Nanoparticles to Enhance the Thermal and Mechanical Properties of Wood Composite. Materials Today: Proceedings, 5 (1). pp. 3143-3149.

Gilal, A.R. and Jaafar, J. and Capretz, L.F. and Omar, M. and Basri, S. and Aziz, I.A. (2018) Finding an effective classification technique to develop a software team composition model. Journal of Software: Evolution and Process, 30 (1).

Gbadamosi, A.O. and Junin, R. and Manan, M.A. and Yekeen, N. and Agi, A. and Oseh, J.O. (2018) Recent advances and prospects in polymeric nanofluids application for enhanced oil recovery. Journal of Industrial and Engineering Chemistry.

Gubartallah, E.A. and Makahleh, A. and Quirino, J.P. and Saad, B. (2018) Determination of biogenic amines in seawater using capillary electrophoresis with capacitively coupled contactless conductivity detection. Molecules, 23 (5).

Gonfa, G. and Muhammad, N. and Azmi Bustam, M. (2018) Probing the interactions between DNA nucleotides and biocompatible liquids: COSMO-RS and molecular simulation study. Separation and Purification Technology, 196. pp. 237-243.

Gopinath, S.C.B. and Anbu, P. and Theivasanthi, T. and Arshad, M.K.M. and Lakshmipriya, T. and Voon, C.H. and Pandian, K. and Velusamy, P. and Chinni, S.V. (2018) Characterization of reduced graphene oxide obtained from vacuum-assisted low-temperature exfoliated graphite. Microsystem Technologies. pp. 1-10.

Gillani, Q.F. and Ahmad, F. and Melor, P.S. and Mutlib, M.I.A. and Ullah, S. (2018) A synergy study of zinc borate in halloysite nanotube reinforced, siloxane epoxy base intumescent fire resistive coatings: Eine Synergieuntersuchung zu Zinkborat in, mit Halloysit-Nanoröhren verstärkten, Siloxane Epoxy basierten, intumeszenten feuerfesten Beschichtungen. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 420-426.

Ghazali, Z. and Zahid, M. (2018) The Awareness and Impact of Carbon Capture and Storage (CCS) on Climate Change in Malaysia. International Journal of Social Ecology and Sustainable Development, 9 (2). pp. 13-27.

Guan, M. and Osman, M. and Ng, C.Y. (2018) Prediction of Deepwater FPSO responses using different numerical analysis methods. E3S Web of Conferences, 34.

Gohari, A. and Matori, N. and Wan Yusof, K. and Toloue, I. and Cho Myint, K. (2018) Effects of the Fuel Price Increase on the Operating Cost of Freight Transport Vehicles. E3S Web of Conferences, 34.

Gheshmi, M.S. and Fatahiyan, S.M. and Khanesary, N.T. and Sia, C.W. and Momeni, M.S. (2018) Investigating the effects of rock porosity and permeability on the performance of nitrogen injection into a southern Iranian oil reservoirs through neural network. IOP Conference Series: Materials Science and Engineering, 328 (1).

Ghaedi, H. and Ayoub, M. and Sufian, S. and Shariff, A.M. and Lal, B. and Wilfred, C.D. (2018) Density and refractive index measurements of transition-temperature mixture (deep eutectic analogues) based on potassium carbonate with dual hydrogen bond donors for CO2 capture. Journal of Chemical Thermodynamics, 118. pp. 147-158.

Ghanem, O.B. and Shah, S.N. and Lévêque, J.-M. and Mutalib, M.I.A. and El-Harbawi, M. and Khan, A.S. and Alnarabiji, M.S. and Al-Absi, H.R.H. and Ullah, Z. (2018) Study of the antimicrobial activity of cyclic cation-based ionic liquids via experimental and group contribution QSAR model. Chemosphere, 195. pp. 21-28.

Gonfa, G. and Muhammad, N. and Azmi Bustam, M. (2018) Probing the interactions between DNA nucleotides and biocompatible liquids: COSMO-RS and molecular simulation study. Separation and Purification Technology, 196. pp. 237-243.

Ghaedi, H. and Ayoub, M. and Sufian, S. and Shariff, A.M. and Lal, B. and Wilfred, C.D. (2018) Density and refractive index measurements of transition-temperature mixture (deep eutectic analogues) based on potassium carbonate with dual hydrogen bond donors for CO2 capture. Journal of Chemical Thermodynamics, 118. pp. 147-158.

Gillani, Q.F. and Ahmad, F. and Abdul Mutalib, M.I. and Megat-Yusoff, P.S.M. and Ullah, S. and Messet, P.J. and Zia-ul-Mustafa, M. (2018) Thermal degradation and pyrolysis analysis of zinc borate reinforced intumescent fire retardant coatings. Progress in Organic Coatings, 123. pp. 82-98.

Gan, D.K.W. and Loy, A.C.M. and Chin, B.L.F. and Yusup, S. and Unrean, P. and Rianawati, E. and Acda, M.N. (2018) Kinetics and thermodynamic analysis in one-pot pyrolysis of rice hull using renewable calcium oxide based catalysts. Bioresource Technology, 265. pp. 180-190.

Ghoushji, M.J. and Alebrahim, R. and Zulkifli, R. and Sulong, A.B. and Abdullah, S. and Azhari, C.H. (2018) Crashworthiness characteristics of natural ramie/bio-epoxy composite tubes for energy absorption application. Iranian Polymer Journal (English Edition), 27 (8). pp. 563-575.

Gillani, Q.F. and Ahmad, F. and Mutalib, M.I.A. and Megat-Yusoff, P.S.M. and Ullah, S. (2018) Effects of Halloysite Nanotube Reinforcement in Expandable Graphite Based Intumescent Fire Retardant Coatings Developed Using Hybrid Epoxy Binder System. Chinese Journal of Polymer Science (English Edition). pp. 1-11.

Gonfa, G. and Muhammad, N. and Azmi Bustam, M. (2018) Probing the interactions between DNA nucleotides and biocompatible liquids: COSMO-RS and molecular simulation study. Separation and Purification Technology, 196. pp. 237-243.

Gopinath, S.C.B. and Anbu, P. and Theivasanthi, T. and Arshad, M.K.M. and Lakshmipriya, T. and Voon, C.H. and Pandian, K. and Velusamy, P. and Chinni, S.V. (2018) Characterization of reduced graphene oxide obtained from vacuum-assisted low-temperature exfoliated graphite. Microsystem Technologies. pp. 1-10.

Gohari, A. and Nasir Matori, A. and Yusof, K.W. and Toloue, I. and Myint, K.C. and Sholagberu, A.T. (2018) Route/Modal choice analysis and tradeoffs evaluation of the intermodal transport network of Peninsular Malaysia. Cogent Engineering, 5 (1).

Gohari, A. and Matori, A.N. and Yusof, K.W. and Toloue, I. and Sholagberu, A.T. (2018) The effect of fuel price increase on transport cost of container transport vehicles. International Journal of GEOMATE, 15 (50). pp. 174-181.

Guan, B.H. and Bin Zahari, M.H. and Lee, K.C. (2018) Effect of La3+ substitution on the structural and magnetic properties of Mn-Zn ferrite prepared by sol-gel auto-combustion method. Materials Science Forum, 916 MS. pp. 91-95.

Ghaedi, H. and Ayoub, M. and Sufian, S. and Hailegiorgis, S.M. and Murshid, G. and Khan, S.N. (2018) Thermal stability analysis, experimental conductivity and pH of phosphonium-based deep eutectic solvents and their prediction by a new empirical equation. Journal of Chemical Thermodynamics, 116. pp. 50-60.

Goscinski, A.M. and Tari, Z. and Aziz, I.A. and Alzahrani, E.J. (2018) Fog computing as a critical link between a central cloud and iot in support of fast discovery of new hydrocarbon reservoirs. Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST, 235. pp. 247-261.

Gupta, A. and Kumar, A. and Sharma, K.V. and Gupta, R. (2018) Application of High Conductive Nanoparticles to Enhance the Thermal and Mechanical Properties of Wood Composite. Materials Today: Proceedings, 5 (1). pp. 3143-3149.

Gilal, A.R. and Jaafar, J. and Capretz, L.F. and Omar, M. and Basri, S. and Aziz, I.A. (2018) Finding an effective classification technique to develop a software team composition model. Journal of Software: Evolution and Process, 30 (1).

Gbadamosi, A.O. and Junin, R. and Manan, M.A. and Yekeen, N. and Agi, A. and Oseh, J.O. (2018) Recent advances and prospects in polymeric nanofluids application for enhanced oil recovery. Journal of Industrial and Engineering Chemistry.

Gubartallah, E.A. and Makahleh, A. and Quirino, J.P. and Saad, B. (2018) Determination of biogenic amines in seawater using capillary electrophoresis with capacitively coupled contactless conductivity detection. Molecules, 23 (5).

Gillani, Q.F. and Ahmad, F. and Abdul Mutalib, M.I. and Megat-Yusoff, P.S.M. and Ullah, S. and Messet, P.J. and Zia-ul-Mustafa, M. (2018) Thermal degradation and pyrolysis analysis of zinc borate reinforced intumescent fire retardant coatings. Progress in Organic Coatings, 123. pp. 82-98.

Gan, D.K.W. and Loy, A.C.M. and Chin, B.L.F. and Yusup, S. and Unrean, P. and Rianawati, E. and Acda, M.N. (2018) Kinetics and thermodynamic analysis in one-pot pyrolysis of rice hull using renewable calcium oxide based catalysts. Bioresource Technology, 265. pp. 180-190.

Ghoushji, M.J. and Alebrahim, R. and Zulkifli, R. and Sulong, A.B. and Abdullah, S. and Azhari, C.H. (2018) Crashworthiness characteristics of natural ramie/bio-epoxy composite tubes for energy absorption application. Iranian Polymer Journal (English Edition), 27 (8). pp. 563-575.

Gillani, Q.F. and Ahmad, F. and Mutalib, M.I.A. and Megat-Yusoff, P.S.M. and Ullah, S. (2018) Effects of Halloysite Nanotube Reinforcement in Expandable Graphite Based Intumescent Fire Retardant Coatings Developed Using Hybrid Epoxy Binder System. Chinese Journal of Polymer Science (English Edition). pp. 1-11.

Gonfa, G. and Muhammad, N. and Azmi Bustam, M. (2018) Probing the interactions between DNA nucleotides and biocompatible liquids: COSMO-RS and molecular simulation study. Separation and Purification Technology, 196. pp. 237-243.

Ghaedi, H. and Ayoub, M. and Sufian, S. and Shariff, A.M. and Lal, B. and Wilfred, C.D. (2018) Density and refractive index measurements of transition-temperature mixture (deep eutectic analogues) based on potassium carbonate with dual hydrogen bond donors for CO2 capture. Journal of Chemical Thermodynamics, 118. pp. 147-158.

Ghaedi, H. and Ayoub, M. and Sufian, S. and Shariff, A.M. and Lal, B. and Wilfred, C.D. (2018) Density and refractive index measurements of transition-temperature mixture (deep eutectic analogues) based on potassium carbonate with dual hydrogen bond donors for CO2 capture. Journal of Chemical Thermodynamics, 118. pp. 147-158.

Ghaedi, H. and Ayoub, M. and Sufian, S. and Shariff, A.M. and Lal, B. and Wilfred, C.D. (2018) Density and refractive index measurements of transition-temperature mixture (deep eutectic analogues) based on potassium carbonate with dual hydrogen bond donors for CO2 capture. Journal of Chemical Thermodynamics, 118. pp. 147-158.

Gonfa, G. and Muhammad, N. and Azmi Bustam, M. (2018) Probing the interactions between DNA nucleotides and biocompatible liquids: COSMO-RS and molecular simulation study. Separation and Purification Technology, 196. pp. 237-243.

Gillani, Q.F. and Ahmad, F. and Abdul Mutalib, M.I. and Megat-Yusoff, P.S.M. and Ullah, S. and Messet, P.J. and Zia-ul-Mustafa, M. (2018) Thermal degradation and pyrolysis analysis of zinc borate reinforced intumescent fire retardant coatings. Progress in Organic Coatings, 123. pp. 82-98.

H

Hooi, Yew Kwang and Hassan, M Fadzil and Shariff, Azmi M and Aziz, Hanida Abdul and Suppiah, Sujendran (2018) Software systems in implementation of process safety at chemical process industry. Platform: A Journal of Science and Technology, 1 (1). pp. 31-46.

Hermansyah, Heri and Nur Hidayat, Mohamad Evi and Kumaraningrum, Anggraini Ratih and Yohda, Masafumi and Shariff, Azmi B Mohd (2018) Assessment, Mitigation, and Control of Potential Gas Leakage in Existing Buildings Not Designed for Gas Installation in Indonesia. Energies, 11 (11). p. 2970.

Huzir, Nurhamieza Md and Aziz, Md Maniruzzaman A and Ismail, SB and Abdullah, Bawadi and Mahmood, Nik Azmi Nik and Umor, NA and Muhammad, Syed Anuar Faua�ad Syed (2018) Agro-industrial waste to biobutanol production: Eco-friendly biofuels for next generation. Renewable and Sustainable Energy Reviews, 94. pp. 476-485.

Hussain, Maham and Tufa, Lemma Dendena and Yusup, Suzana and Zabiri, Haslinda (2018) A kinetic-based simulation model of palm kernel shell steam gasification in a circulating fluidized bed using Aspen Plus®: A case study. Biofuels, 9 (5). pp. 635-646.

Hettiarachchi, Chathuranga and Birowosuto, Muhammad Danang and Nguyen, Tien Hoa and Ahmad, Riyas and Pita, Kantisara and Mathews, Nripan and Dang, Cuong and Alnarabiji, Mohamad Sahban and Zabidi, Noor Asmawati Mohd and Ramli, Anita and others (2018) A journal at the forefront of the design and understanding of solid-state and crystalline materi als rsc. li/crystengcomm. CrystEngComm, 20. p. 6667.

Hassan, S. and Khanesar, M.A. and Jaafar, J. and Khosravi, A. (2018) Optimal parameters of an ELM-based interval type 2 fuzzy logic system: a hybrid learning algorithm. Neural Computing and Applications, 29 (4). pp. 1001-1014.

Hamza, M.F. and Merican, Z.M.A. and Soleimani, H. and Abghari, S.Z. and Sinnathambi, C.M. and Stephen, K.D. (2018) A laboratory study of chemical enhanced oil recovery (CEOR) in compartmentalized sandstone reservoir: A case study of a 2-D phase macro-model reservoir. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 893-901.

Hanouneh, S. and Amin, H.U. and Saad, N.M. and Malik, A.S. (2018) EEG Power and Functional Connectivity Correlates with Semantic Long-Term Memory Retrieval. IEEE Access, 6. pp. 8695-8703.

Hermana, M. and Ngui, J.Q. and Sum, C.W. and Ghosh, D.P. (2018) Feasibility study of SQp and SQs attributes application for facies classification. Geosciences (Switzerland), 8 (1).

Hussain, N. and Iqbal, A. and Jeoti, V. (2018) Investigation into an efficient numerical modelling approach for estimating path-loss over variable terrain. International Journal of Engineering and Technology(UAE), 7 (2). pp. 26-30.

Hassan, R. and Marimuthu, M. (2018) Bridging and bonding: having a Muslim diversity on corporate boards and firm performance. Journal of Islamic Accounting and Business Research, 9 (3). pp. 457-478.

Hagos, F.Y. and A. Aziz, A.R. and Sulaiman, S.A. and Mamat, R. (2018) Engine speed and air-fuel ratio effect on the combustion of methane augmented hydrogen rich syngas in DI SI engine. International Journal of Hydrogen Energy.

Hussain, N.A.A. and Ali, S.S.A. and Saad, M.N.M. and Ovinis, M. (2018) Nonlinear ROV modelling and control system design using adaptive U-model, FLC and PID control approaches. Defence S and T Technical Bulletin, 11 (1). pp. 77-89.

Harun, N. and Abidin, S.Z. and Osazuwa, O.U. and Taufiq-Yap, Y.H. and Azizan, M.T. (2018) Hydrogen production from glycerol dry reforming over Ag-promoted Ni/Al2O3. International Journal of Hydrogen Energy.

Hussain, K. and Bashir, N. and Hussain, Z. and Sulaiman, S.A. (2018) Cement catalyzed conversion of biomass into upgraded bio-oil through microwave metal interaction pyrolysis in aluminum coil reactor. Journal of Analytical and Applied Pyrolysis, 129. pp. 37-42.

Harun, N.Y. and Parvez, A.M. and Afzal, M.T. (2018) Process and energy analysis of pelleting agricultural and woody biomass blends. Sustainability (Switzerland), 10 (6).

Hematpur, H. and Mahmood, S.M. and Nasr, N.H. and Elraies, K.A. (2018) Foam flow in porous media: Concepts, models and challenges. Journal of Natural Gas Science and Engineering, 53. pp. 163-180.

Hashmani, M.A. and Abro, F.R. and Unar, M.A. and Watada, J. (2018) A novel algorithm to reduce peak-to-average power ratio of orthogonal frequency division multiplexing signals. Journal of Theoretical and Applied Information Technology, 96 (8). pp. 2106-2127.

Hassan, R. and Marimuthu, M. (2018) Contextualizing comprehensive board diversity and firm financial performance: Integrating market, management and shareholder�s perspective. Journal of Management and Organization. pp. 1-45.

Hasan, R. and Napiah, M. (2018) The perception of Malaysian pedestrians toward the use of footbridges. Traffic Injury Prevention, 19 (3). pp. 292-297.

Hussain, M. and Tufa, L.D. and Yusup, S. and Zabiri, H. (2018) A kinetic-based simulation model of palm kernel shell steam gasification in a circulating fluidized bed using Aspen Plus®: A case study. Biofuels. pp. 1-12.

Halim, A.H. and Ismail, I. (2018) Tree physiology optimization in constrained optimization problem. Telkomnika (Telecommunication Computing Electronics and Control), 16 (2). pp. 876-882.

Husham Abdulmalek, S. and Khalaji Assadi, M. and Al-Kayiem, H.H. and Gitan, A.A. (2018) A comparative analysis on the uniformity enhancement methods of solar thermal drying. Energy, 148. pp. 1103-1115.

Husin, H. and Solo, B.B. and Ibrahim, I.M. and Chyuan, O.H. and Roslan, A. (2018) Weight loss effect and potentiodynamic polarization response of 1-butyl-3-methylimidazolium chloride ionic liquid in highly acidic medium. Journal of Engineering Science and Technology, 13 (4). pp. 1005-1015.

Hidayah Ishak, N. and Mustafa Hashim, A. (2018) Dam pre-release as an important operation strategy in reducing flood impact in Malaysia. E3S Web of Conferences, 34.

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. and Irawan, S. (2018) A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials. International Journal of Computational Methods, 15 (2).

Harun, W.S.W. and Kamariah, M.S.I.N. and Muhamad, N. and Ghani, S.A.C. and Ahmad, F. and Mohamed, Z. (2018) A review of powder additive manufacturing processes for metallic biomaterials. Powder Technology, 327. pp. 128-151.

Hasan, M.H. and Akhir, E.A.P. and Aziz, N.A. and Aziz, I.A. and Jaafar, J. (2018) An analysis of parallelization in mamdani- and sugeno-type quality of web service fuzzy monitoring models. Journal of Theoretical and Applied Information Technology, 96 (3). pp. 722-731.

Hassanudin, S.N. and Aziz, I.A. and Jaafar, J. and Qaiyum, S. and Zubir, W.M.A.M. (2018) Predictive analytic dashboard for desalter and crude distillation unit. 2017 IEEE Conference on Big Data and Analytics, ICBDA 2017, 2018-J. pp. 55-60.

Haron, N. and Jaafar, J. and Aziz, I.A. and Hassan, M.H. and Shapiai, M.I. (2018) Data trustworthiness in Internet of Things: A taxonomy and future directions. 2017 IEEE Conference on Big Data and Analytics, ICBDA 2017, 2018-J. pp. 25-30.

Harsoori, M.M. and Zulkifli, T.Z.A. and Abbas, U. and Sattar, S. (2018) A gain boosting single stage cascode LNA for millimeter-wave applications. Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics, 2017-O. pp. 109-112.

Hailegiorgis, S.M. and Khan, S.N. and Abdolah, N.H.H. and Ayoub, M. and Tesfamichael, A. (2018) Investigation of carbon dioxide solubility in aqueous N-methyldiethanolamine (MDEA)-1- butyl-3-methylimidazolium acetate (bmimAc) hybrid solvent. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 65-71.

Huzir, N.M. and Aziz, M.M.A. and Ismail, S.B. and Abdullah, B. and Mahmood, N.A.N. and Umor, N.A. and Syed Muhammad, S.A.F. (2018) Agro-industrial waste to biobutanol production: Eco-friendly biofuels for next generation. Renewable and Sustainable Energy Reviews, 94. pp. 476-485.

Huzir, N.M. and Aziz, M.M.A. and Ismail, S.B. and Abdullah, B. and Mahmood, N.A.N. and Umor, N.A. and Syed Muhammad, S.A.F. (2018) Agro-industrial waste to biobutanol production: Eco-friendly biofuels for next generation. Renewable and Sustainable Energy Reviews, 94. pp. 476-485.

Hanamertani, A.S. and Pilus, R.M. and Manan, N.A. and Mutalib, M.I.A. (2018) The use of ionic liquids as additive to stabilize surfactant foam for mobility control application. Journal of Petroleum Science and Engineering, 167. pp. 192-201.

Halim, A.H. and Ismail, I. (2018) Tree physiology optimization on SISO and MIMO PID control tuning. Neural Computing and Applications. pp. 1-11.

Hanamertani, A.S. and Pilus, R.M. and Manan, N.A. and Ahmed, S. and Awang, M. (2018) Ionic Liquid Application in Surfactant Foam Stabilization for Gas Mobility Control. Energy and Fuels, 32 (6). pp. 6545-6556.

Hussein, A.R. and Albarody, T.M.B. and Yusoff, P.S.M.B.M. (2018) Evaluation of Electromagnetic Near-Field Measurement Technique as Non-Destructive Testing for Composite Structures. IOP Conference Series: Materials Science and Engineering, 370 (1).

Hosseini, S.J. and Foroozesh, J. (2018) Experimental study of polymer injection enhanced oil recovery in homogeneous and heterogeneous porous media using glass-type micromodels. Journal of Petroleum Exploration and Production Technology. pp. 1-11.

Harun, N.Y. and Parvez, A.M. and Afzal, M.T. (2018) Process and energy analysis of pelleting agricultural and woody biomass blends. Sustainability (Switzerland), 10 (6).

Hematpur, H. and Mahmood, S.M. and Nasr, N.H. and Elraies, K.A. (2018) Foam flow in porous media: Concepts, models and challenges. Journal of Natural Gas Science and Engineering, 53. pp. 163-180.

Hashmani, M.A. and Abro, F.R. and Unar, M.A. and Watada, J. (2018) A novel algorithm to reduce peak-to-average power ratio of orthogonal frequency division multiplexing signals. Journal of Theoretical and Applied Information Technology, 96 (8). pp. 2106-2127.

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. and Irawan, S. (2018) A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials. International Journal of Computational Methods, 15 (2).

Harun, W.S.W. and Kamariah, M.S.I.N. and Muhamad, N. and Ghani, S.A.C. and Ahmad, F. and Mohamed, Z. (2018) A review of powder additive manufacturing processes for metallic biomaterials. Powder Technology, 327. pp. 128-151.

Hermana, M. and Ngui, J.Q. and Sum, C.W. and Ghosh, D.P. (2018) Feasibility study of SQp and SQs attributes application for facies classification. Geosciences (Switzerland), 8 (1).

Hussain, N. and Iqbal, A. and Jeoti, V. (2018) Investigation into an efficient numerical modelling approach for estimating path-loss over variable terrain. International Journal of Engineering and Technology(UAE), 7 (2). pp. 26-30.

Hassan, R. and Marimuthu, M. (2018) Bridging and bonding: having a Muslim diversity on corporate boards and firm performance. Journal of Islamic Accounting and Business Research, 9 (3). pp. 457-478.

Hagos, F.Y. and A. Aziz, A.R. and Sulaiman, S.A. and Mamat, R. (2018) Engine speed and air-fuel ratio effect on the combustion of methane augmented hydrogen rich syngas in DI SI engine. International Journal of Hydrogen Energy.

Hussain, N.A.A. and Ali, S.S.A. and Saad, M.N.M. and Ovinis, M. (2018) Nonlinear ROV modelling and control system design using adaptive U-model, FLC and PID control approaches. Defence S and T Technical Bulletin, 11 (1). pp. 77-89.

Harun, N. and Abidin, S.Z. and Osazuwa, O.U. and Taufiq-Yap, Y.H. and Azizan, M.T. (2018) Hydrogen production from glycerol dry reforming over Ag-promoted Ni/Al2O3. International Journal of Hydrogen Energy.

Hussain, K. and Bashir, N. and Hussain, Z. and Sulaiman, S.A. (2018) Cement catalyzed conversion of biomass into upgraded bio-oil through microwave metal interaction pyrolysis in aluminum coil reactor. Journal of Analytical and Applied Pyrolysis, 129. pp. 37-42.

Huzir, N.M. and Aziz, M.M.A. and Ismail, S.B. and Abdullah, B. and Mahmood, N.A.N. and Umor, N.A. and Syed Muhammad, S.A.F. (2018) Agro-industrial waste to biobutanol production: Eco-friendly biofuels for next generation. Renewable and Sustainable Energy Reviews, 94. pp. 476-485.

Hanamertani, A.S. and Pilus, R.M. and Manan, N.A. and Mutalib, M.I.A. (2018) The use of ionic liquids as additive to stabilize surfactant foam for mobility control application. Journal of Petroleum Science and Engineering, 167. pp. 192-201.

Halim, A.H. and Ismail, I. (2018) Tree physiology optimization on SISO and MIMO PID control tuning. Neural Computing and Applications. pp. 1-11.

Hanamertani, A.S. and Pilus, R.M. and Manan, N.A. and Ahmed, S. and Awang, M. (2018) Ionic Liquid Application in Surfactant Foam Stabilization for Gas Mobility Control. Energy and Fuels, 32 (6). pp. 6545-6556.

Hussein, A.R. and Albarody, T.M.B. and Yusoff, P.S.M.B.M. (2018) Evaluation of Electromagnetic Near-Field Measurement Technique as Non-Destructive Testing for Composite Structures. IOP Conference Series: Materials Science and Engineering, 370 (1).

Hosseini, S.J. and Foroozesh, J. (2018) Experimental study of polymer injection enhanced oil recovery in homogeneous and heterogeneous porous media using glass-type micromodels. Journal of Petroleum Exploration and Production Technology. pp. 1-11.

Hussain, M. and Tufa, L.D. and Yusup, S. and Zabiri, H. (2018) A kinetic-based simulation model of palm kernel shell steam gasification in a circulating fluidized bed using Aspen Plus®: A case study. Biofuels. pp. 1-12.

Hamza, M.F. and Merican, Z.M.A. and Soleimani, H. and Abghari, S.Z. and Sinnathambi, C.M. and Stephen, K.D. (2018) A laboratory study of chemical enhanced oil recovery (CEOR) in compartmentalized sandstone reservoir: A case study of a 2-D phase macro-model reservoir. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 893-901.

I

Isa, Faezah and Zabiri, Haslinda and Ng, Nur Kamarul Syaabah and Shariff, Azmi M (2018) CO2 removal via promoted potassium carbonate: A review on modeling and simulation techniques. International Journal of Greenhouse Gas Control, 76. pp. 236-265.

Isa, Faezah and Zabiri, Haslinda and Ng, Nur Kamarul Syaabah and Shariff, Azmi M (2018) CO2 removal via promoted potassium carbonate: A review on modeling and simulation techniques. International Journal of Greenhouse Gas Control, 76. pp. 236-265.

Ismail, N.F. and Hasan, M.H. and Mustapha, E.E. (2018) Technology use, emotional connection and their relationship: A literature review. Journal of Theoretical and Applied Information Technology, 96 (1). pp. 127-139.

Ismail, O.A. and Mahmood, A.K. and Abdelmaboud, A. (2018) Factors influencing academic performance of students in blended and traditional domains. International Journal of Emerging Technologies in Learning, 13 (2). pp. 170-187.

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. (2018) Evaluation of the hardness distribution and fracture location in friction stir welded AA6063 pipe butt joints. Advanced Structured Materials, 85. pp. 439-444.

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. and Ahmad, K. (2018) The mapping of full weld cycle heat profile for friction stir welding pipe butt joints. Advanced Structured Materials, 85. pp. 461-467.

Imam, A.A. and Basri, S. and Ahmad, R. and Gilal, A.R. (2018) Data synchronization model for heterogeneous mobile databases and server-side database. International Journal of Advanced Computer Science and Applications, 9 (1). pp. 521-531.

Irshad, K. and Habib, K. and Saidur, R. (2018) Photovoltaic-assisted thermoelectric cooling and heating systems. Green Energy and Technology, Part F. pp. 251-272.

Irfan, M. and Ahmad, T. and Moniruzzaman, M. and Abdullah, B. (2018) Ionic liquid functionalized synthesis of gold nanoparticles in response to Elaise Guineensis (oil palm) leaves amount. AIP Conference Proceedings, 1963.

Idris, A. and Harahap, I.S.H. and Ahmed Ali, M.O. (2018) Variation of Time Domain Failure Probabilities of Jack-up with Wave Return Periods. IOP Conference Series: Earth and Environmental Science, 140 (1).

Ibrahim, N.A. and Wirzal, M.D.H. and Nordin, N.A.H. and Abd Halim, N.S. (2018) Development of Polyvinylidene fluoride (PVDF)-ZIF-8 Membrane for Wastewater Treatment. IOP Conference Series: Earth and Environmental Science, 140 (1).

Imran, M. and Liew, M.S. and Garcia, E.M. and Nasif, M.S. and Yassin, A.Y.M. and Niazi, U.M. (2018) Deformation and Heat Transfer on Three Sides Protected Beams under Fire Accident. IOP Conference Series: Earth and Environmental Science, 140 (1).

Irfan, S.A. and Razali, R. and KuShaari, K. and Mansor, N. and Azeem, B. and Ford Versypt, A.N. (2018) A review of mathematical modeling and simulation of controlled-release fertilizers. Journal of Controlled Release, 271. pp. 45-54.

Irfan, M. and Ahmad, T. and Moniruzzaman, M. and Abdullah, B. (2018) Ionic liquid functionalized synthesis of gold nanoparticles in response to Elaise Guineensis (oil palm) leaves amount. AIP Conference Proceedings, 1963.

Irshad, K. and Khan, A.I. and Algarni, S. and Habib, K. and Saha, B.B. (2018) Objective and subjective evaluation of a sleeping environment test chamber with a thermoelectric air cooling system. Building and Environment, 141. pp. 155-165.

Ismael, M.A. and Heikal, M.R. and Aziz, A.R.A. and Syah, F. and Zainal A., E.Z. and Crua, C. (2018) The effect of fuel injection equipment on the dispersed phase of water-in-diesel emulsions. Applied Energy, 222. pp. 762-771.

Iqbal, B. and Sarfaraz, Z. and Muhammad, N. and Ahmad, P. and Iqbal, J. and Khan, Z.U.H. and Gonfa, G. and Iqbal, F. and Jamal, A. and Rahim, A. (2018) Ionic liquid as a potential solvent for preparation of collagen-alginate-hydroxyapatite beads as bone filler. Journal of Biomaterials Science, Polymer Edition, 29 (10). pp. 1168-1184.

Ismail, A. and Bhatti, M.S. and Faye, I. and Lu, C.K. and Laude, A. and Tang, T.B. (2018) Pulse waveform analysis on temporal changes in ocular blood flow due to caffeine intake: a comparative study between habitual and non-habitual groups. Graefe's Archive for Clinical and Experimental Ophthalmology. pp. 1-11.

Iqbal, B. and Muhammad, N. and Rahim, A. and Iqbal, F. and Sharif, F. and Safi, S.Z. and Khan, A.S. and Gonfa, G. and Uroos, M. and Rehman, I.U. (2018) Development of collagen/PVA composites patches for osteochondral defects using a green processing of ionic liquid. International Journal of Polymeric Materials and Polymeric Biomaterials. pp. 1-7.

Idris, I.H.M. and Yusof, N.Z. (2018) Development of low thermal mass cement-sand block utilizing peat soil and effective microorganism. Case Studies in Construction Materials, 8. pp. 8-15.

Ismail, O.A. and Mahmood, A.K. and Abdelmaboud, A. (2018) Factors influencing academic performance of students in blended and traditional domains. International Journal of Emerging Technologies in Learning, 13 (2). pp. 170-187.

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. (2018) Evaluation of the hardness distribution and fracture location in friction stir welded AA6063 pipe butt joints. Advanced Structured Materials, 85. pp. 439-444.

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. and Ahmad, K. (2018) The mapping of full weld cycle heat profile for friction stir welding pipe butt joints. Advanced Structured Materials, 85. pp. 461-467.

Imam, A.A. and Basri, S. and Ahmad, R. and Gilal, A.R. (2018) Data synchronization model for heterogeneous mobile databases and server-side database. International Journal of Advanced Computer Science and Applications, 9 (1). pp. 521-531.

Irshad, K. and Habib, K. and Saidur, R. (2018) Photovoltaic-assisted thermoelectric cooling and heating systems. Green Energy and Technology, Part F. pp. 251-272.

Irshad, K. and Khan, A.I. and Algarni, S. and Habib, K. and Saha, B.B. (2018) Objective and subjective evaluation of a sleeping environment test chamber with a thermoelectric air cooling system. Building and Environment, 141. pp. 155-165.

Ismael, M.A. and Heikal, M.R. and Aziz, A.R.A. and Syah, F. and Zainal A., E.Z. and Crua, C. (2018) The effect of fuel injection equipment on the dispersed phase of water-in-diesel emulsions. Applied Energy, 222. pp. 762-771.

Iqbal, B. and Sarfaraz, Z. and Muhammad, N. and Ahmad, P. and Iqbal, J. and Khan, Z.U.H. and Gonfa, G. and Iqbal, F. and Jamal, A. and Rahim, A. (2018) Ionic liquid as a potential solvent for preparation of collagen-alginate-hydroxyapatite beads as bone filler. Journal of Biomaterials Science, Polymer Edition, 29 (10). pp. 1168-1184.

Ismail, A. and Bhatti, M.S. and Faye, I. and Lu, C.K. and Laude, A. and Tang, T.B. (2018) Pulse waveform analysis on temporal changes in ocular blood flow due to caffeine intake: a comparative study between habitual and non-habitual groups. Graefe's Archive for Clinical and Experimental Ophthalmology. pp. 1-11.

Iqbal, B. and Muhammad, N. and Rahim, A. and Iqbal, F. and Sharif, F. and Safi, S.Z. and Khan, A.S. and Gonfa, G. and Uroos, M. and Rehman, I.U. (2018) Development of collagen/PVA composites patches for osteochondral defects using a green processing of ionic liquid. International Journal of Polymeric Materials and Polymeric Biomaterials. pp. 1-7.

Idris, I.H.M. and Yusof, N.Z. (2018) Development of low thermal mass cement-sand block utilizing peat soil and effective microorganism. Case Studies in Construction Materials, 8. pp. 8-15.

Ibrahim, N.A. and Wirzal, M.D.H. and Nordin, N.A.H. and Abd Halim, N.S. (2018) Development of Polyvinylidene fluoride (PVDF)-ZIF-8 Membrane for Wastewater Treatment. IOP Conference Series: Earth and Environmental Science, 140 (1).

Irfan, Muhammad and Moniruzzaman, Muhammad and Ahmad, Tausif and Osman, Ola Yahia and Mandal, Pradip Chandra and Bhattacharjee, Sekhar and Hussain, Murid (2018) Stability, interparticle interactions and catalytic performance of gold nanoparticles synthesized through ionic liquid mediated oil palm leaves extract. Journal of environmental chemical engineering, 6 (4). pp. 5024-5031.

Ismail, Aishah and Bhatti, Mehwish S and Faye, Ibrahima and Lu, Cheng Kai and Laude, Augustinus and Tang, Tong Boon (2018) Pulse waveform analysis on temporal changes in ocular blood flow due to caffeine intake: a comparative study between habitual and non-habitual groups. Graefe's Archive for Clinical and Experimental Ophthalmology, 256. pp. 1711-1721.

J

Jamil, Asif and Oh, Pei Ching and Shariff, Azmi M (2018) Polyetherimide-montmorillonite mixed matrix hollow fibre membranes: Effect of inorganic/organic montmorillonite on CO2/CH4 separation. Separation and Purification Technology, 206. pp. 256-267.

Jun, Lau N and Bahari, Mahadi B and Phuong, Pham TT and Phuc, Nguyen Huu Huy and Samart, Chanatip and Abdullah, Bawadi and Setiabudi, HD and Vo, Dai-Viet N (2018) Ethylene glycol dry reforming for syngas generation on Ce-promoted Co/Al.

Jun, Lau N and Bahari, Mahadi B and Phuong, Pham TT and Phuc, Nguyen Huu Huy and Samart, Chanatip and Abdullah, Bawadi and Setiabudi, HD and Vo, Dai-Viet N (2018) Ethylene glycol dry reforming for syngas generation on Ce-promoted Co/Al 2 O 3 catalysts. Applied Petrochemical Research, 8. pp. 253-261.

Jusoh, Norwahyu and Yeong, YF and Lau, KK and Shariff, AM (2018) Effects of amine-functionalization on mixed matrix membranes encompassing of T-type zeolite and 6FDA-based polyimide for separation of CO2 from CH4. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5126-5134.

Jusoh, Norwahyu and Yeong, YF and Lau, KK and Shariff, AM (2018) Effects of amine-functionalization on mixed matrix membranes encompassing of T-type zeolite and 6FDA-based polyimide for separation of CO2 from CH4. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5126-5134.

Jamaludin, S.N.F. and Pubellier, M. and Menier, D. (2018) Structural Restoration of Carbonate Platform in the Southern Part of Central Luconia, Malaysia. Journal of Earth Science, 29 (1). pp. 155-168.

Javaid, M.U. and Isha, A.S.N. and Sabir, A.A. and Ghazali, Z. and Nübling, M. (2018) Does Psychosocial Work Environment Factors Predict Stress and Mean Arterial Pressure in the Malaysian Industry Workers? BioMed Research International, 2018.

Jaafar, J. and Gilal, A.R. and Omar, M. and Basri, S. and Aziz, I.A. and Hasan, M.H. (2018) A Rough-Fuzzy Inference System for Selecting Team Leader for Software Development Teams. Advances in Intelligent Systems and Computing, 661. pp. 304-314.

Jilani, M.T. and Rehman, M.Z.U. and Khan, A.M. and Chughtai, O. and Abbas, M.A. and Khan, M.T. (2018) An implementation of IoT-based microwave sensing system for the evaluation of tissues moisture. Microelectronics Journal.

Jafary, T. and Wan Daud, W.R. and Ghasemi, M. and Abu Bakar, M.H. and Sedighi, M. and Kim, B.H. and Carmona-Martínez, A.A. and Jahim, J.M. and Ismail, M. (2018) Clean hydrogen production in a full biological microbial electrolysis cell. International Journal of Hydrogen Energy.

Jatoi, M.A. and Kamel, N. (2018) Brain source localization using reduced EEG sensors. Signal, Image and Video Processing. pp. 1-8.

Janjuhah, H.T. and Salim, A.M.A. and Alansari, A. and Ghosh, D.P. (2018) Presence of microporosity in Miocene carbonate platform, Central Luconia, offshore Sarawak, Malaysia. Arabian Journal of Geosciences, 11 (9).

Jamil, N. and Husin, H. and Aman, Z. and Hassan, Z. (2018) Investigation on the effect of THF on Nitrogen Hydrate formation under isobaric condition. IOP Conference Series: Materials Science and Engineering, 334 (1).

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2018) Effects of amine-functionalization on mixed matrix membranes encompassing of T-type zeolite and 6FDA-based polyimide for separation of CO2 from CH4. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5126-5134.

Jumbri, K. and Noh, N.S.F.M. and Ahmad, N.A. and Rahman, M.B.A. and Ahmad, H. (2018) Synthesis and characterization of new cholinium-based ionic liquids for antimicrobial application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 16-23.

Jibril, Z.I. and Ramli, A. and Jumbri, K. (2018) Preparation and Characterization of Ce-Zr/Al-MCM-41 Bimetallic Catalyst for Transesterification of Jatropha Oil to Biodiesel. IOP Conference Series: Earth and Environmental Science, 168 (1).

Jumbri, K. and Noh, N.S.F.M. and Ahmad, N.A. and Rahman, M.B.A. and Ahmad, H. (2018) Synthesis and characterization of new cholinium-based ionic liquids for antimicrobial application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 16-23.

Jafary, T. and Wan Daud, W.R. and Ghasemi, M. and Abu Bakar, M.H. and Sedighi, M. and Kim, B.H. and Carmona-Martínez, A.A. and Jahim, J.M. and Ismail, M. (2018) Clean hydrogen production in a full biological microbial electrolysis cell. International Journal of Hydrogen Energy.

Jilani, M.T. and Rehman, M.Z.U. and Khan, A.M. and Chughtai, O. and Abbas, M.A. and Khan, M.T. (2018) An implementation of IoT-based microwave sensing system for the evaluation of tissues moisture. Microelectronics Journal.

Jamil, A. and Oh, P.C. and Shariff, A.M. (2018) Polyetherimide-montmorillonite mixed matrix hollow fibre membranes: Effect of inorganic/organic montmorillonite on CO2/CH4 separation. Separation and Purification Technology, 206. pp. 256-267.

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2018) Effects of amine-functionalization on mixed matrix membranes encompassing of T-type zeolite and 6FDA-based polyimide for separation of CO2 from CH4. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5126-5134.

Javvad ur Rehman, M. and Dass, S.C. and Asirvadam, V.S. (2018) A weighted likelihood criteria for learning importance densities in particle filtering. Eurasip Journal on Advances in Signal Processing, 2018 (1).

Jamil, A. and Oh, P.C. and Shariff, A.M. (2018) Polyetherimide-montmorillonite mixed matrix hollow fibre membranes: Effect of inorganic/organic montmorillonite on CO2/CH4 separation. Separation and Purification Technology, 206. pp. 256-267.

Jahan, S. and Sakidin, H. and Nazar, R. and Pop, I. (2018) Analysis of heat transfer in nanofluid past a convectively heated permeable stretching/shrinking sheet with regression and stability analyses. Results in Physics, 10. pp. 395-405.

Jibril, Z.I. and Ramli, A. and Jumbri, K. (2018) Preparation and Characterization of Ce-Zr/Al-MCM-41 Bimetallic Catalyst for Transesterification of Jatropha Oil to Biodiesel. IOP Conference Series: Earth and Environmental Science, 168 (1).

JosephNg, P.S. (2018) EaaS Optimization: Available yet hidden information technology infrastructure inside medium size enterprise. Technological Forecasting and Social Change, 132. pp. 165-173.

Jatoi, M.A. and Kamel, N. (2018) Brain source localization using reduced EEG sensors. Signal, Image and Video Processing. pp. 1-8.

Janjuhah, H.T. and Salim, A.M.A. and Alansari, A. and Ghosh, D.P. (2018) Presence of microporosity in Miocene carbonate platform, Central Luconia, offshore Sarawak, Malaysia. Arabian Journal of Geosciences, 11 (9).

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2018) Effects of amine-functionalization on mixed matrix membranes encompassing of T-type zeolite and 6FDA-based polyimide for separation of CO2 from CH4. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5126-5134.

Javaid, M.U. and Isha, A.S.N. and Sabir, A.A. and Ghazali, Z. and Nübling, M. (2018) Does Psychosocial Work Environment Factors Predict Stress and Mean Arterial Pressure in the Malaysian Industry Workers? BioMed Research International, 2018.

Jaafar, J. and Gilal, A.R. and Omar, M. and Basri, S. and Aziz, I.A. and Hasan, M.H. (2018) A Rough-Fuzzy Inference System for Selecting Team Leader for Software Development Teams. Advances in Intelligent Systems and Computing, 661. pp. 304-314.

Jilani, M.T. and Rehman, M.Z.U. and Khan, A.M. and Chughtai, O. and Abbas, M.A. and Khan, M.T. (2018) An implementation of IoT-based microwave sensing system for the evaluation of tissues moisture. Microelectronics Journal.

Jafary, T. and Wan Daud, W.R. and Ghasemi, M. and Abu Bakar, M.H. and Sedighi, M. and Kim, B.H. and Carmona-Martínez, A.A. and Jahim, J.M. and Ismail, M. (2018) Clean hydrogen production in a full biological microbial electrolysis cell. International Journal of Hydrogen Energy.

Javvad ur Rehman, M. and Dass, S.C. and Asirvadam, V.S. (2018) A weighted likelihood criteria for learning importance densities in particle filtering. Eurasip Journal on Advances in Signal Processing, 2018 (1).

Jamil, A. and Oh, P.C. and Shariff, A.M. (2018) Polyetherimide-montmorillonite mixed matrix hollow fibre membranes: Effect of inorganic/organic montmorillonite on CO2/CH4 separation. Separation and Purification Technology, 206. pp. 256-267.

Jahan, S. and Sakidin, H. and Nazar, R. and Pop, I. (2018) Analysis of heat transfer in nanofluid past a convectively heated permeable stretching/shrinking sheet with regression and stability analyses. Results in Physics, 10. pp. 395-405.

Jibril, Z.I. and Ramli, A. and Jumbri, K. (2018) Preparation and Characterization of Ce-Zr/Al-MCM-41 Bimetallic Catalyst for Transesterification of Jatropha Oil to Biodiesel. IOP Conference Series: Earth and Environmental Science, 168 (1).

JosephNg, P.S. (2018) EaaS Optimization: Available yet hidden information technology infrastructure inside medium size enterprise. Technological Forecasting and Social Change, 132. pp. 165-173.

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2018) Effects of amine-functionalization on mixed matrix membranes encompassing of T-type zeolite and 6FDA-based polyimide for separation of CO2 from CH4. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5126-5134.

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2018) Effects of amine-functionalization on mixed matrix membranes encompassing of T-type zeolite and 6FDA-based polyimide for separation of CO2 from CH4. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5126-5134.

Jamil, A. and Oh, P.C. and Shariff, A.M. (2018) Polyetherimide-montmorillonite mixed matrix hollow fibre membranes: Effect of inorganic/organic montmorillonite on CO2/CH4 separation. Separation and Purification Technology, 206. pp. 256-267.

Javaid, M.U. and Isha, A.S.N. and Sabir, A.A. and Ghazali, Z. and Nübling, M. (2018) Does Psychosocial Work Environment Factors Predict Stress and Mean Arterial Pressure in the Malaysian Industry Workers? BioMed Research International, 2018.

Jusoh, Norwahyu and Yeong, YF and Lau, KK and Shariff, AM (2018) Effects of amine-functionalization on mixed matrix membranes encompassing of T-type zeolite and 6FDA-based polyimide for separation of CO2 from CH4. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5126-5134.

Jamil, Asif and Oh, Pei Ching and Shariff, Azmi M (2018) Polyetherimide-montmorillonite mixed matrix hollow fibre membranes: Effect of inorganic/organic montmorillonite on CO2/CH4 separation. Separation and Purification Technology, 206. pp. 256-267.

Jayson, Desmond and Mat Taib, Norhidayah and Abu Mansor, Mohd Radzi and Mohamad, Taib Iskandar and Ilham, Zul (2018) Performance analysis of a direct injection diesel engine using biodiesel and additives. Journal of Mechanical Engineering (JMechE) (1). pp. 67-80.

K

Kartikawati, Nur Ani and Safdar, Rizwan and Lal, Bhajan and Mutalib, Muhammad Ibrahim Bin Abdul and Shariff, Azmi Mohd (2018) Measurement and correlation of the physical properties of aqueous solutions of ammonium based ionic liquids. Journal of Molecular Liquids, 253. pp. 250-258.

Kareem, Firas A Abdul and Shariff, Azmi Mohd and Ullah, Sami and Keong, Lau Kok and Mellon, Nurhayati (2018) Total and partial uptakes of multicomponent vapor-gas mixtures on 13X zeolite at 343K: Experimental and modeling study. Microporous and Mesoporous Materials, 258. pp. 95-113.

Kareem, Firas A Abdul and Shariff, AM and Ullah, Sami and Dreisbach, Frieder and Keong, LK and Mellon, Nurhayati and Garg, Sahil (2018) Experimental measurements and modeling of supercritical CO2 adsorption on 13X and 5A zeolites. Journal of Natural Gas Science and Engineering, 50. pp. 115-127.

Khan, Muhammad Ishaq and Zaini, Dzulkarnain and Shariff, Azmi Mohd and Moniruzzaman, Muhammad (2018) Probabilistic ecotoxicological risk assessment of imidazolium ionic liquids with amino acid and halide anions. Journal of Mechanical Engineering and Sciences, 12 (3). pp. 3798-3810.

Kareem, Firas A Abdul and Shariff, AM and Ullah, Sami and Mellon, Nurhayati and Keong, LK (2018) Adsorption of pure and predicted binary (CO2: CH4) mixtures on 13X-Zeolite: Equilibrium and kinetic properties at offshore conditions. Microporous and Mesoporous Materials, 267. pp. 221-234.

Khan, MS and Mellon, NB and Lal, B (2018) Prelimnary experimental evaluation for methane (CH4) and carbon dioxide (CO2) Gas Hydrate Mitigation. Procedia Engineering, 148. pp. 932-940.

Khan, Muhammad Saad and Bavoh, Cornelius B and Partoon, Behzad and Nashed, Omar and Lal, Bhajan and Mellon, Nurhayati Bt (2018) Impacts of ammonium based ionic liquids alkyl chain on thermodynamic hydrate inhibition for carbon dioxide rich binary gas. Journal of Molecular Liquids, 261. pp. 283-290.

Kareem, Firas A Abdul and Shariff, Azmi Mohd and Ullah, Sami and Keong, Lau Kok and Mellon, Nurhayati (2018) Total and partial uptakes of multicomponent vapor-gas mixtures on 13X zeolite at 343K: Experimental and modeling study. Microporous and Mesoporous Materials, 258. pp. 95-113.

Kareem, Firas A Abdul and Shariff, AM and Ullah, Sami and Dreisbach, Frieder and Keong, LK and Mellon, Nurhayati and Garg, Sahil (2018) Experimental measurements and modeling of supercritical CO2 adsorption on 13X and 5A zeolites. Journal of Natural Gas Science and Engineering, 50. pp. 115-127.

Kareem, Firas A Abdul and Shariff, AM and Ullah, Sami and Mellon, Nurhayati and Keong, LK (2018) Adsorption of pure and predicted binary (CO2: CH4) mixtures on 13X-Zeolite: Equilibrium and kinetic properties at offshore conditions. Microporous and Mesoporous Materials, 267. pp. 221-234.

Kareem, Firas A Abdul and Shariff, AM and Ullah, Sami and Mellon, Nurhayati and Keong, LK (2018) Adsorption of pure and predicted binary (CO2: CH4) mixtures on 13X-Zeolite: Equilibrium and kinetic properties at offshore conditions. Microporous and Mesoporous Materials, 267. pp. 221-234.

Kareem, Firas A Abdul and Shariff, Azmi Mohd and Ullah, Sami and Keong, Lau Kok and Mellon, Nurhayati (2018) Total and partial uptakes of multicomponent vapor-gas mixtures on 13X zeolite at 343K: Experimental and modeling study. Microporous and Mesoporous Materials, 258. pp. 95-113.

Kareem, Firas A Abdul and Shariff, AM and Ullah, Sami and Dreisbach, Frieder and Keong, LK and Mellon, Nurhayati and Garg, Sahil (2018) Experimental measurements and modeling of supercritical CO2 adsorption on 13X and 5A zeolites. Journal of Natural Gas Science and Engineering, 50. pp. 115-127.

Khan, Muhammad Saad and Lal, Bhajan and Keong, Lau Kok and Sabil, Khalik Mohamad (2018) Experimental evaluation and thermodynamic modelling of AILs alkyl chain elongation on methane riched gas hydrate system. Fluid phase equilibria, 473. pp. 300-309.

Khan, Saleem Nawaz and Hailegiorgis, Sintayehu Mekuria and Man, Zakaria and Shariff, Azmi Mohd (2018) Solubility of CO2 in Piperazine (PZ) Activated Aqueous NMethyldiethanolamine (MDEA) Solvent under High Pressure. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 96-102.

Khan, Saleem Nawaz and Hailegiorgis, Sintayehu Mekuria and Man, Zakaria and Garg, Sahil and Shariff, Azmi Mohd and Farrukh, Sarah and Ayoub, Muhammad and Ghaedi, Hosein (2018) High-pressure absorption study of CO2 in aqueous N-methyldiethanolamine (MDEA) and MDEA-piperazine (PZ)-1-butyl-3-methylimidazolium trifluoromethanesulfonate bmimOTf hybrid solvents. Journal of Molecular Liquids, 249. pp. 1236-1244.

Khan, A.S. and Man, Z. and Bustam, M.A. and Nasrullah, A. and Ullah, Z. and Sarwono, A. and Shah, F.U. and Muhammad, N. (2018) Efficient conversion of lignocellulosic biomass to levulinic acid using acidic ionic liquids. Carbohydrate Polymers, 181. pp. 208-214.

Kanesan, D. and Suppiah, R. and Zubir, M.S.B. (2018) A study on the thickening time of class F fly ash geopolymer cement for oil well cementing. ARPN Journal of Engineering and Applied Sciences, 13 (2). pp. 682-685.

Kajo, I. and Kamel, N. and Malik, A.S. (2018) An adaptive block-based matching algorithm for crowd motion sequences. Multimedia Tools and Applications, 77 (2). pp. 1783-1809.

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Garg, S. and Shariff, A.M. and Farrukh, S. and Ayoub, M. and Ghaedi, H. (2018) High-pressure absorption study of CO2 in aqueous N-methyldiethanolamine (MDEA) and MDEA-piperazine (PZ)-1-butyl-3-methylimidazolium trifluoromethanesulfonate bmimOTf hybrid solvents. Journal of Molecular Liquids, 249. pp. 1236-1244.

Khan, A.S. and Nasrullah, A. and Ullah, Z. and Bhat, A.H. and Ghanem, O.B. and Muhammad, N. and Rashid, M.U. and Man, Z. (2018) Thermophysical properties and ecotoxicity of new nitrile functionalised protic ionic liquids. Journal of Molecular Liquids, 249. pp. 583-590.

Khan, A.M. and Jeoti, V. and Rehman, M.Z.U. and Jilani, M.T. and Chugtai, O. and Rehmani, M.H. (2018) Pilot-Based Time Domain SNR Estimation for Broadcasting OFDM Systems. Journal of Computer Networks and Communications, 2018.

Karim, S.A.A. and Ismail, M.T. and Othman, M. and Abdullah, M.F. and Hasan, M.K. and Sulaiman, J. (2018) Rational cubic spline interpolation for missing solar data imputation. Journal of Engineering and Applied Sciences, 13 (9). pp. 2587-2592.

Kong, H. and Cheu, S.C. and Othman, N.S. and Song, S.T. and Johari, K. and Saman, N. and Lye, J.W.P. and Mat, H. (2018) Cetyltrimethylammonium bromide-coated agrosorbents and their high benzene adsorption performance from aqueous solution. Environmental Progress and Sustainable Energy, 37 (1). pp. 305-317.

Khan, Z. and Yusup, S. and Ahmad, M.M. and Inayat, A. and Naqvi, M. and Sheikh, R. and Watson, I. (2018) Integrated catalytic adsorption steam gasification in a bubbling fluidized bed for enhanced H2 production: Perspective of design and pilot plant experiences. Biofuels, Bioproducts and Biorefining.

Khan, A.S. and Man, Z. and Bustam, M.A. and Kait, C.F. and Nasrullah, A. and Ullah, Z. and Sarwono, A. and Ahamd, P. and Muhammad, N. (2018) Dicationic ionic liquids as sustainable approach for direct conversion of cellulose to levulinic acid. Journal of Cleaner Production, 170. pp. 591-600.

Kajo, I. and Kamel, N. and Ruichek, Y. and Malik, A.S. (2018) SVD-Based Tensor-Completion Technique for Background Initialization. IEEE Transactions on Image Processing, 27 (6). pp. 3114-3126.

Kim, D.K. and Incecik, A. and Choi, H.S. and Wong, E.W.C. and Yu, S.Y. and Park, K.S. (2018) A simplified method to predict fatigue damage of offshore riser subjected to vortex-induced vibration by adopting current index concept. Ocean Engineering, 157. pp. 401-411.

Khan, M.A. and Ali, A. and Jeoti, V. and Manzoor, S. (2018) A Chaos-Based Substitution Box (S-Box) Design with Improved Differential Approximation Probability (DP). Iranian Journal of Science and Technology - Transactions of Electrical Engineering, 42 (2). pp. 219-238.

Kajo, I. and Kamel, N. and Ruichek, Y. (2018) Incremental tensor-based completion method for detection of stationary foreground objects. IEEE Transactions on Circuits and Systems for Video Technology.

Kandasamy, S. and Moniruzzaman, M. and Sivapragasam, M. and Shamsuddin, M.R. and Mutalib, M.I.A. (2018) Formulation and characterization of acetate based ionic liquid in oil microemulsion as a carrier for acyclovir and methotrexate. Separation and Purification Technology, 196. pp. 149-156.

Khan, M.S. and Yaqub, S. and Manner, N. and Karthwathi, N.A. and Qasim, A. and Binti Mellon, N. and Lal, B. (2018) Experimental Equipment Validation for Methane (CH4) and Carbon Dioxide (CO2) Hydrates. IOP Conference Series: Materials Science and Engineering, 344 (1).

Khan, M.S. and Ahmed, I. and Lal, B. and Idris, A.-A. and Albeirutty, M.H. and Ayoub, M. and Sufian, S.B. (2018) Physicochemical and FTIR Study of Diesel-Hydrogen Peroxide Fuel Blend. IOP Conference Series: Materials Science and Engineering, 344 (1).

Khed, V.C. and Mohammed, B.S. and Nuruddin, M.F. (2018) Effects of different crumb rubber sizes on the flowability and compressive strength of hybrid fibre reinforced ECC. IOP Conference Series: Earth and Environmental Science, 140 (1).

Koh, C.K. and Chin, J.F. and Kamaruddin, S. (2018) Modified SPC for short run test and measurement process in multi-stations. IOP Conference Series: Materials Science and Engineering, 328 (1).

Kueh, B.W.B. and Yusup, S. and Osman, N. (2018) Supercritical carbon dioxide extraction of Melaleuca cajuputi leaves for herbicides allelopathy: Optimization and kinetics modelling. Journal of CO2 Utilization, 24. pp. 220-227.

Kartikawati, N.A. and Safdar, R. and Lal, B. and Mutalib, M.I.B.A. and Shariff, A.M. (2018) Measurement and correlation of the physical properties of aqueous solutions of ammonium based ionic liquids. Journal of Molecular Liquids, 253. pp. 250-258.

Kamarulzaman, P.S.D. and Yusup, S. and Osman, N. and Ramli@Yusof, N.H. and Kueh, B.W.B. and Talib, R. (2018) Effectiveness of neem based biopesticide to enhance rice (Oryza sativa) productivity. Sustainable Chemistry and Pharmacy, 7. pp. 36-40.

Kareem, S. and Ahmad, R.B. and Sarlan, A.B. (2018) Framework for the identification of fraudulent health insurance claims using association rule mining. 2017 IEEE Conference on Big Data and Analytics, ICBDA 2017, 2018-J. pp. 99-104.

Kaur, H. and Jaafar, A. (2018) The effect of sodium hydroxide on drag reduction using banana peel as a drag reduction agent. AIP Conference Proceedings, 1930.

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Shariff, A.M. (2018) Solubility of CO2 in piperazine (PZ) activated aqueous N-methyldiethanolamine (MDEA) solvent under high pressure. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 96-102.

Kadhim, S.K. and Nasif, M.S. and Al-Kayiem, H.H. and Al-Waked, R. (2018) Computational fluid dynamics simulation of blood flow profile and shear stresses in bileaflet mechanical heart valve by using monolithic approach. Simulation, 94 (2). pp. 93-104.

Khan, M.S. and Bavoh, C.B. and Partoon, B. and Nashed, O. and Lal, B. and Mellon, N.B. (2018) Impacts of ammonium based ionic liquids alkyl chain on thermodynamic hydrate inhibition for carbon dioxide rich binary gas. Journal of Molecular Liquids, 261. pp. 283-290.

Khan, A.S. and Man, Z. and Bustam, M.A. and Nasrullah, A. and Ullah, Z. and Sarwono, A. and Shah, F.U. and Muhammad, N. (2018) Efficient conversion of lignocellulosic biomass to levulinic acid using acidic ionic liquids. Carbohydrate Polymers, 181. pp. 208-214.

Khan, A.S. and Man, Z. and Bustam, M.A. and Kait, C.F. and Nasrullah, A. and Ullah, Z. and Sarwono, A. and Ahamd, P. and Muhammad, N. (2018) Dicationic ionic liquids as sustainable approach for direct conversion of cellulose to levulinic acid. Journal of Cleaner Production, 170. pp. 591-600.

Kartikawati, N.A. and Safdar, R. and Lal, B. and Mutalib, M.I.B.A. and Shariff, A.M. (2018) Measurement and correlation of the physical properties of aqueous solutions of ammonium based ionic liquids. Journal of Molecular Liquids, 253. pp. 250-258.

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Shariff, A.M. (2018) Solubility of CO2 in piperazine (PZ) activated aqueous N-methyldiethanolamine (MDEA) solvent under high pressure. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 96-102.

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Garg, S. and Shariff, A.M. and Farrukh, S. and Ayoub, M. and Ghaedi, H. (2018) High-pressure absorption study of CO2 in aqueous N-methyldiethanolamine (MDEA) and MDEA-piperazine (PZ)-1-butyl-3-methylimidazolium trifluoromethanesulfonate bmimOTf hybrid solvents. Journal of Molecular Liquids, 249. pp. 1236-1244.

Khan, A. and Ali, M. and Ilyas, A. and Naik, P. and Vankelecom, I.F.J. and Gilani, M.A. and Bilad, M.R. and Sajjad, Z. and Khan, A.L. (2018) ZIF-67 filled PDMS mixed matrix membranes for recovery of ethanol via pervaporation. Separation and Purification Technology, 206. pp. 50-58.

Khan, M.S. and Lal, B. and Keong, L.K. and Sabil, K.M. (2018) Experimental evaluation and thermodynamic modelling of AILs alkyl chain elongation on methane riched gas hydrate system. Fluid Phase Equilibria, 473. pp. 300-309.

Kadir, W.N.A. and Lam, M.K. and Uemura, Y. and Lim, J.W. and Lee, K.T. (2018) Harvesting and pre-treatment of microalgae cultivated in wastewater for biodiesel production: A review. Energy Conversion and Management, 171. pp. 1416-1429.

Khan, Z. and Yusup, S. and Kamble, P. and Naqvi, M. and Watson, I. (2018) Assessment of energy flows and energy efficiencies in integrated catalytic adsorption steam gasification for hydrogen production. Applied Energy, 225. pp. 346-355.

Khan, A. and Ali, S.S.A. and Anwer, A. and Adil, S.H. and Meriaudeau, F. (2018) Subsea Pipeline Corrosion Estimation by Restoring and Enhancing Degraded Underwater Images. IEEE Access.

Khan, M.S. and Bavoh, C.B. and Partoon, B. and Nashed, O. and Lal, B. and Mellon, N.B. (2018) Impacts of ammonium based ionic liquids alkyl chain on thermodynamic hydrate inhibition for carbon dioxide rich binary gas. Journal of Molecular Liquids, 261. pp. 283-290.

Karim, S.A.A. and Ismail, M.T. and Hasan, M.K. and Sulaiman, J. (2018) Data interpolation using Runge Kutta method. AIP Conference Proceedings, 1974.

Kim, D.K. and Wong, E.W.C. and Lee, E.B. and Yu, S.Y. and Kim, Y.T. (2018) A method for the empirical formulation of current profile. Ships and Offshore Structures. pp. 1-17.

Koh, K.J. and Mohd Yassin, A.Y. and Latheef, M. (2018) On the buoyancy load formulation for geometrically nonlinear analysis of flexible marine risers. Ocean Engineering, 157. pp. 313-324.

Kin, L.K. and Baheta, A.T. and Habib, K. (2018) Analytical investigation of thermoelectric performance for cooling application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 32-40.

Kadir, M.F.Z. and Salleh, N.S. and Hamsan, M.H. and Aspanut, Z. and Majid, N.A. and Shukur, M.F. (2018) Biopolymeric electrolyte based on glycerolized methyl cellulose with NH4Br as proton source and potential application in EDLC. Ionics, 24 (6). pp. 1651-1662.

Kumar, M. and Das, B. and Nallagownden, P. and Elamvazuthi, I. and Khan, S.A. (2018) Optimal configuration of wind farms in radial distribution system using particle swarm optimization technique. Bulletin of Electrical Engineering and Informatics, 7 (2). pp. 286-293.

Kajo, I. and Kamel, N. and Ruichek, Y. and Malik, A.S. (2018) SVD-Based Tensor-Completion Technique for Background Initialization. IEEE Transactions on Image Processing, 27 (6). pp. 3114-3126.

Kim, D.K. and Incecik, A. and Choi, H.S. and Wong, E.W.C. and Yu, S.Y. and Park, K.S. (2018) A simplified method to predict fatigue damage of offshore riser subjected to vortex-induced vibration by adopting current index concept. Ocean Engineering, 157. pp. 401-411.

Khan, M.A. and Ali, A. and Jeoti, V. and Manzoor, S. (2018) A Chaos-Based Substitution Box (S-Box) Design with Improved Differential Approximation Probability (DP). Iranian Journal of Science and Technology - Transactions of Electrical Engineering, 42 (2). pp. 219-238.

Kajo, I. and Kamel, N. and Ruichek, Y. (2018) Incremental tensor-based completion method for detection of stationary foreground objects. IEEE Transactions on Circuits and Systems for Video Technology.

Kandasamy, S. and Moniruzzaman, M. and Sivapragasam, M. and Shamsuddin, M.R. and Mutalib, M.I.A. (2018) Formulation and characterization of acetate based ionic liquid in oil microemulsion as a carrier for acyclovir and methotrexate. Separation and Purification Technology, 196. pp. 149-156.

Kueh, B.W.B. and Yusup, S. and Osman, N. (2018) Supercritical carbon dioxide extraction of Melaleuca cajuputi leaves for herbicides allelopathy: Optimization and kinetics modelling. Journal of CO2 Utilization, 24. pp. 220-227.

Kartikawati, N.A. and Safdar, R. and Lal, B. and Mutalib, M.I.B.A. and Shariff, A.M. (2018) Measurement and correlation of the physical properties of aqueous solutions of ammonium based ionic liquids. Journal of Molecular Liquids, 253. pp. 250-258.

Kanesan, D. and Suppiah, R. and Zubir, M.S.B. (2018) A study on the thickening time of class F fly ash geopolymer cement for oil well cementing. ARPN Journal of Engineering and Applied Sciences, 13 (2). pp. 682-685.

Kajo, I. and Kamel, N. and Malik, A.S. (2018) An adaptive block-based matching algorithm for crowd motion sequences. Multimedia Tools and Applications, 77 (2). pp. 1783-1809.

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Garg, S. and Shariff, A.M. and Farrukh, S. and Ayoub, M. and Ghaedi, H. (2018) High-pressure absorption study of CO2 in aqueous N-methyldiethanolamine (MDEA) and MDEA-piperazine (PZ)-1-butyl-3-methylimidazolium trifluoromethanesulfonate bmimOTf hybrid solvents. Journal of Molecular Liquids, 249. pp. 1236-1244.

Khan, A.S. and Nasrullah, A. and Ullah, Z. and Bhat, A.H. and Ghanem, O.B. and Muhammad, N. and Rashid, M.U. and Man, Z. (2018) Thermophysical properties and ecotoxicity of new nitrile functionalised protic ionic liquids. Journal of Molecular Liquids, 249. pp. 583-590.

Khan, A.M. and Jeoti, V. and Rehman, M.Z.U. and Jilani, M.T. and Chugtai, O. and Rehmani, M.H. (2018) Pilot-Based Time Domain SNR Estimation for Broadcasting OFDM Systems. Journal of Computer Networks and Communications, 2018.

Karim, S.A.A. and Ismail, M.T. and Othman, M. and Abdullah, M.F. and Hasan, M.K. and Sulaiman, J. (2018) Rational cubic spline interpolation for missing solar data imputation. Journal of Engineering and Applied Sciences, 13 (9). pp. 2587-2592.

Kong, H. and Cheu, S.C. and Othman, N.S. and Song, S.T. and Johari, K. and Saman, N. and Lye, J.W.P. and Mat, H. (2018) Cetyltrimethylammonium bromide-coated agrosorbents and their high benzene adsorption performance from aqueous solution. Environmental Progress and Sustainable Energy, 37 (1). pp. 305-317.

Khan, Z. and Yusup, S. and Ahmad, M.M. and Inayat, A. and Naqvi, M. and Sheikh, R. and Watson, I. (2018) Integrated catalytic adsorption steam gasification in a bubbling fluidized bed for enhanced H2 production: Perspective of design and pilot plant experiences. Biofuels, Bioproducts and Biorefining.

Khan, A.S. and Man, Z. and Bustam, M.A. and Kait, C.F. and Nasrullah, A. and Ullah, Z. and Sarwono, A. and Ahamd, P. and Muhammad, N. (2018) Dicationic ionic liquids as sustainable approach for direct conversion of cellulose to levulinic acid. Journal of Cleaner Production, 170. pp. 591-600.

Khan, A. and Ali, M. and Ilyas, A. and Naik, P. and Vankelecom, I.F.J. and Gilani, M.A. and Bilad, M.R. and Sajjad, Z. and Khan, A.L. (2018) ZIF-67 filled PDMS mixed matrix membranes for recovery of ethanol via pervaporation. Separation and Purification Technology, 206. pp. 50-58.

Khan, M.S. and Lal, B. and Keong, L.K. and Sabil, K.M. (2018) Experimental evaluation and thermodynamic modelling of AILs alkyl chain elongation on methane riched gas hydrate system. Fluid Phase Equilibria, 473. pp. 300-309.

Kadir, W.N.A. and Lam, M.K. and Uemura, Y. and Lim, J.W. and Lee, K.T. (2018) Harvesting and pre-treatment of microalgae cultivated in wastewater for biodiesel production: A review. Energy Conversion and Management, 171. pp. 1416-1429.

Khan, Z. and Yusup, S. and Kamble, P. and Naqvi, M. and Watson, I. (2018) Assessment of energy flows and energy efficiencies in integrated catalytic adsorption steam gasification for hydrogen production. Applied Energy, 225. pp. 346-355.

Khan, A. and Ali, S.S.A. and Anwer, A. and Adil, S.H. and Meriaudeau, F. (2018) Subsea Pipeline Corrosion Estimation by Restoring and Enhancing Degraded Underwater Images. IEEE Access.

Khan, M.S. and Bavoh, C.B. and Partoon, B. and Nashed, O. and Lal, B. and Mellon, N.B. (2018) Impacts of ammonium based ionic liquids alkyl chain on thermodynamic hydrate inhibition for carbon dioxide rich binary gas. Journal of Molecular Liquids, 261. pp. 283-290.

Karim, S.A.A. and Ismail, M.T. and Hasan, M.K. and Sulaiman, J. (2018) Data interpolation using Runge Kutta method. AIP Conference Proceedings, 1974.

Kim, D.K. and Wong, E.W.C. and Lee, E.B. and Yu, S.Y. and Kim, Y.T. (2018) A method for the empirical formulation of current profile. Ships and Offshore Structures. pp. 1-17.

Koh, K.J. and Mohd Yassin, A.Y. and Latheef, M. (2018) On the buoyancy load formulation for geometrically nonlinear analysis of flexible marine risers. Ocean Engineering, 157. pp. 313-324.

Kin, L.K. and Baheta, A.T. and Habib, K. (2018) Analytical investigation of thermoelectric performance for cooling application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 32-40.

Kadir, M.F.Z. and Salleh, N.S. and Hamsan, M.H. and Aspanut, Z. and Majid, N.A. and Shukur, M.F. (2018) Biopolymeric electrolyte based on glycerolized methyl cellulose with NH4Br as proton source and potential application in EDLC. Ionics, 24 (6). pp. 1651-1662.

Kumar, M. and Das, B. and Nallagownden, P. and Elamvazuthi, I. and Khan, S.A. (2018) Optimal configuration of wind farms in radial distribution system using particle swarm optimization technique. Bulletin of Electrical Engineering and Informatics, 7 (2). pp. 286-293.

Khan, A.S. and Man, Z. and Bustam, M.A. and Nasrullah, A. and Ullah, Z. and Sarwono, A. and Shah, F.U. and Muhammad, N. (2018) Efficient conversion of lignocellulosic biomass to levulinic acid using acidic ionic liquids. Carbohydrate Polymers, 181. pp. 208-214.

Khan, A.S. and Man, Z. and Bustam, M.A. and Kait, C.F. and Nasrullah, A. and Ullah, Z. and Sarwono, A. and Ahamd, P. and Muhammad, N. (2018) Dicationic ionic liquids as sustainable approach for direct conversion of cellulose to levulinic acid. Journal of Cleaner Production, 170. pp. 591-600.

Khan, M.S. and Bavoh, C.B. and Partoon, B. and Nashed, O. and Lal, B. and Mellon, N.B. (2018) Impacts of ammonium based ionic liquids alkyl chain on thermodynamic hydrate inhibition for carbon dioxide rich binary gas. Journal of Molecular Liquids, 261. pp. 283-290.

Kaur, H. and Jaafar, A. (2018) The effect of sodium hydroxide on drag reduction using banana peel as a drag reduction agent. AIP Conference Proceedings, 1930.

Khan, M.S. and Lal, B. and Keong, L.K. and Sabil, K.M. (2018) Experimental evaluation and thermodynamic modelling of AILs alkyl chain elongation on methane riched gas hydrate system. Fluid Phase Equilibria, 473. pp. 300-309.

Khan, M.S. and Bavoh, C.B. and Partoon, B. and Nashed, O. and Lal, B. and Mellon, N.B. (2018) Impacts of ammonium based ionic liquids alkyl chain on thermodynamic hydrate inhibition for carbon dioxide rich binary gas. Journal of Molecular Liquids, 261. pp. 283-290.

Khan, M.S. and Ahmed, I. and Lal, B. and Idris, A.-A. and Albeirutty, M.H. and Ayoub, M. and Sufian, S.B. (2018) Physicochemical and FTIR Study of Diesel-Hydrogen Peroxide Fuel Blend. IOP Conference Series: Materials Science and Engineering, 344 (1).

Khan, M.S. and Yaqub, S. and Manner, N. and Karthwathi, N.A. and Qasim, A. and Binti Mellon, N. and Lal, B. (2018) Experimental Equipment Validation for Methane (CH4) and Carbon Dioxide (CO2) Hydrates. IOP Conference Series: Materials Science and Engineering, 344 (1).

Kartikawati, N.A. and Safdar, R. and Lal, B. and Mutalib, M.I.B.A. and Shariff, A.M. (2018) Measurement and correlation of the physical properties of aqueous solutions of ammonium based ionic liquids. Journal of Molecular Liquids, 253. pp. 250-258.

Khan, A.S. and Man, Z. and Bustam, M.A. and Nasrullah, A. and Ullah, Z. and Sarwono, A. and Shah, F.U. and Muhammad, N. (2018) Efficient conversion of lignocellulosic biomass to levulinic acid using acidic ionic liquids. Carbohydrate Polymers, 181. pp. 208-214.

Khan, A.S. and Man, Z. and Bustam, M.A. and Kait, C.F. and Nasrullah, A. and Ullah, Z. and Sarwono, A. and Ahamd, P. and Muhammad, N. (2018) Dicationic ionic liquids as sustainable approach for direct conversion of cellulose to levulinic acid. Journal of Cleaner Production, 170. pp. 591-600.

Khan, Muhammad Saad and Lal, Bhajan and Keong, Lau Kok and Sabil, Khalik Mohamad (2018) Experimental evaluation and thermodynamic modelling of AILs alkyl chain elongation on methane riched gas hydrate system. Fluid phase equilibria, 473. pp. 300-309.

Kareem, Firas A Abdul and Shariff, Azmi Mohd and Ullah, Sami and Keong, Lau Kok and Mellon, Nurhayati (2018) Total and partial uptakes of multicomponent vapor-gas mixtures on 13X zeolite at 343K: Experimental and modeling study. Microporous and Mesoporous Materials, 258. pp. 95-113.

Kareem, Firas A Abdul and Shariff, AM and Ullah, Sami and Dreisbach, Frieder and Keong, LK and Mellon, Nurhayati and Garg, Sahil (2018) Experimental measurements and modeling of supercritical CO2 adsorption on 13X and 5A zeolites. Journal of Natural Gas Science and Engineering, 50. pp. 115-127.

Kareem, Firas A Abdul and Shariff, AM and Ullah, Sami and Mellon, Nurhayati and Keong, LK (2018) Adsorption of pure and predicted binary (CO2: CH4) mixtures on 13X-Zeolite: Equilibrium and kinetic properties at offshore conditions. Microporous and Mesoporous Materials, 267. pp. 221-234.

Khan, Muhammad Ishaq and Zaini, Dzulkarnain and Shariff, Azmi Mohd and Moniruzzaman, Muhammad (2018) Probabilistic ecotoxicological risk assessment of imidazolium ionic liquids with amino acid and halide anions. Journal of Mechanical Engineering and Sciences, 12 (3). pp. 3798-3810.

Kandasamy, Shalini and Moniruzzaman, Muhammad and Sivapragasam, Magaret and Shamsuddin, Muhammad Rashid and Mutalib, Mohamed Ibrahim Abdul (2018) Formulation and characterization of acetate based ionic liquid in oil microemulsion as a carrier for acyclovir and methotrexate. Separation and Purification Technology, 196. pp. 149-156.

L

Lee, Siew-Pei and Mellon, N and Shariff, Azmi M and Leveque, Jean-Marc (2018) High-pressure CO2-CH4 selective adsorption on covalent organic polymer. Journal of Natural Gas Science and Engineering, 50. pp. 139-146.

Lock, Serene Sow Mun and Lau, Kok Keong and Shariff, Azmi Mohd and Yeong, Yin Fong and Bustam, Mohamad Azmi (2018) Thickness dependent penetrant gas transport properties and separation performance within ultrathin polysulfone membrane: Insights from atomistic molecular simulation. Journal of Polymer Science Part B: Polymer Physics, 56 (2). pp. 131-158.

Lock, Serene Sow Mu and Lau, Kok Keon and Shariff, AM and Yeong, Yin Fon and Bustam, MA and Jusoh, Norwahyu and Ahmad, Faizan (2018) An atomistic simulation towards elucidation of operating temperature effect in CO2 swelling of polysulfone polymeric membranes. Journal of Natural Gas Science and Engineering, 57. pp. 135-154.

Lock, Serene Sow Mun and Lau, Kok Keong and Shariff, Azmi Mohd and Yeong, Yin Fong and Bustam, Mohamad Azmi (2018) Thickness dependent penetrant gas transport properties and separation performance within ultrathin polysulfone membrane: Insights from atomistic molecular simulation. Journal of Polymer Science Part B: Polymer Physics, 56 (2). pp. 131-158.

Lal, B and Shariff, AM and Mukhtar, H and Nasir, Q and Qasim, A (2018) An overview of cryogenic separation techniques for natural gas with high CO2 content. Journal of Engineering and Applied Sciences, 13 (8). pp. 2152-2155.

Lee, Siew-Pei and Mellon, N and Shariff, Azmi M and Leveque, Jean-Marc (2018) High-pressure CO2-CH4 selective adsorption on covalent organic polymer. Journal of Natural Gas Science and Engineering, 50. pp. 139-146.

Lee, Siew-Pei and Mellon, N and Shariff, Azmi M and Leveque, Jean-Marc (2018) Geometry variation in porous covalent triazine polymer (CTP) for CO 2 adsorption. New Journal of Chemistry, 42 (18). pp. 15488-15496.

Lal, B and Shariff, AM and Mukhtar, H and Nasir, Q and Qasim, A (2018) An overview of cryogenic separation techniques for natural gas with high CO2 content. Journal of Engineering and Applied Sciences, 13 (8). pp. 2152-2155.

Lock, SS M and Lau, Kok Keon and Shariff, AM and Yeong, Yin Fon and Ahmad, Faizan (2018) Mathematical modelling of thickness and temperature dependent physical aging to O 2/N 2 gas separation in polymeric membranes. RSC advances, 8 (53). pp. 30265-30279.

Lee, Siew-Pei and Mellon, N and Shariff, Azmi M and Leveque, Jean-Marc (2018) Geometry variation in porous covalent triazine polymer (CTP) for CO 2 adsorption. New Journal of Chemistry, 42 (18). pp. 15488-15496.

Lee, S.-P. and Mellon, N. and Shariff, A.M. and Leveque, J.-M. (2018) High-pressure CO2-CH4 selective adsorption on covalent organic polymer. Journal of Natural Gas Science and Engineering, 50. pp. 139-146.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. (2018) Thickness dependent penetrant gas transport properties and separation performance within ultrathin polysulfone membrane: Insights from atomistic molecular simulation. Journal of Polymer Science, Part B: Polymer Physics, 56 (2). pp. 131-158.

Lemma, T.A. (2018) Preface. Studies in Computational Intelligence, 743. vii-viii.

Lemma, T.A. (2018) Intelligent Fault Detection and Diagnostics. Studies in Computational Intelligence, 743. pp. 99-117.

Lemma, T.A. (2018) Application Studies, Part-I: Model Identification and Validation. Studies in Computational Intelligence, 743. pp. 119-169.

Lemma, T.A. (2018) Model Uncertainity, Fault Detection and Diagnostics. Studies in Computational Intelligence, 743. pp. 75-97.

Lemma, T.A. (2018) Model Identification Using Neuro-Fuzzy Approach. Studies in Computational Intelligence, 743. pp. 37-74.

Lemma, T.A. (2018) Literature Review. Studies in Computational Intelligence, 743. pp. 11-35.

Lemma, T.A. (2018) Introduction. Studies in Computational Intelligence, 743. pp. 1-10.

Lal, B. and Shariff, A.M. and Mukhtar, H. and Nasir, Q. and Qasim, A. (2018) An overview of cryogenic separation techniques for natural gas with high CO2 content. Journal of Engineering and Applied Sciences, 13 (8). pp. 2152-2155.

Lai, G.T. and Mang, W.J. and Rafek, A.G. and Serasa, A.S. and Mazlan, N.A. and Razib, A.M.M. and Hussin, A. and Ern, L.K. and Mohamed, T.R. (2018) Stability assessment of limestone cave: Batu Caves, Selangor, Malaysia. Sains Malaysiana, 47 (1). pp. 59-66.

Loy, A.C.M. and Yusup, S. and Lam, M.K. and Chin, B.L.F. and Shahbaz, M. and Yamamoto, A. and Acda, M.N. (2018) The effect of industrial waste coal bottom ash as catalyst in catalytic pyrolysis of rice husk for syngas production. Energy Conversion and Management, 165. pp. 541-554.

Leong, K.-Y. and Loo, S.-L. and Bashir, M.J.K. and Oh, W.-D. and Rao, P.V. and Lim, J.-W. (2018) Bioregeneration of spent activated carbon: Review of key factors and recent mathematical models of kinetics. Chinese Journal of Chemical Engineering, 26 (5). pp. 893-902.

Lee, C.T. and Mohammad Rozali, N.E. and Van Fan, Y. and Klemeš, J.J. and Towprayoon, S. (2018) Low-carbon emission development in Asia: energy sector, waste management and environmental management system. Clean Technologies and Environmental Policy, 20 (3). pp. 443-449.

Lee, C.T. and Mohammad Rozali, N.E. and Klemeš, J.J. and Towprayoon, S. (2018) Advancing low-carbon emissions in Asia: mitigation of greenhouse gases and enhancing economic feasibility for major sectors. Clean Technologies and Environmental Policy, 20 (3). pp. 441-442.

Lai, L.S. and Yeong, Y.F. and Lau, K.K. and Azmi, M.S. and Chew, T.L. (2018) Zeolitic Imidazolate Framework-8 Membrane for H2/CO2 Separation: Experimental and Modeling. IOP Conference Series: Materials Science and Engineering, 318 (1).

Lee, S.-P. and Mellon, N. and Shariff, A.M. and Leveque, J.-M. (2018) High-pressure CO2-CH4 selective adsorption on covalent organic polymer. Journal of Natural Gas Science and Engineering, 50. pp. 139-146.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. and Jusoh, N. and Ahmad, F. (2018) An atomistic simulation towards elucidation of operating temperature effect in CO2 swelling of polysulfone polymeric membranes. Journal of Natural Gas Science and Engineering, 57. pp. 135-154.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. (2018) Thickness dependent penetrant gas transport properties and separation performance within ultrathin polysulfone membrane: Insights from atomistic molecular simulation. Journal of Polymer Science, Part B: Polymer Physics, 56 (2). pp. 131-158.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. and Jusoh, N. and Ahmad, F. (2018) An atomistic simulation towards elucidation of operating temperature effect in CO2 swelling of polysulfone polymeric membranes. Journal of Natural Gas Science and Engineering, 57. pp. 135-154.

Lee, S.-P. and Mellon, N. and Shariff, A.M. and Leveque, J.-M. (2018) High-pressure CO2-CH4 selective adsorption on covalent organic polymer. Journal of Natural Gas Science and Engineering, 50. pp. 139-146.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. (2018) Thickness dependent penetrant gas transport properties and separation performance within ultrathin polysulfone membrane: Insights from atomistic molecular simulation. Journal of Polymer Science, Part B: Polymer Physics, 56 (2). pp. 131-158.

Lal, B. and Shariff, A.M. and Mukhtar, H. and Nasir, Q. and Qasim, A. (2018) An overview of cryogenic separation techniques for natural gas with high CO2 content. Journal of Engineering and Applied Sciences, 13 (8). pp. 2152-2155.

Lee, K. and Lee, J. and Dass, S.C. (2018) Inference for differential equation models using relaxation via dynamical systems. Computational Statistics and Data Analysis, 127. pp. 116-134.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. and Jusoh, N. and Ahmad, F. (2018) An atomistic simulation towards elucidation of operating temperature effect in CO2 swelling of polysulfone polymeric membranes. Journal of Natural Gas Science and Engineering, 57. pp. 135-154.

Leong, W.-H. and Lim, J.-W. and Lam, M.-K. and Uemura, Y. and Ho, Y.-C. (2018) Third generation biofuels: A nutritional perspective in enhancing microbial lipid production. Renewable and Sustainable Energy Reviews, 91. pp. 950-961.

Loy, A.C.M. and Gan, D.K.W. and Yusup, S. and Chin, B.L.F. and Lam, M.K. and Shahbaz, M. and Unrean, P. and Acda, M.N. and Rianawati, E. (2018) Thermogravimetric kinetic modelling of in-situ catalytic pyrolytic conversion of rice husk to bioenergy using rice hull ash catalyst. Bioresource Technology, 261. pp. 213-222.

Leong, W.-H. and Lim, J.-W. and Lam, M.-K. and Uemura, Y. and Ho, C.-D. and Ho, Y.-C. (2018) Co-cultivation of activated sludge and microalgae for the simultaneous enhancements of nitrogen-rich wastewater bioremediation and lipid production. Journal of the Taiwan Institute of Chemical Engineers, 87. pp. 216-224.

Loy, A.C.M. and Yusup, S. and Lam, M.K. and Chin, B.L.F. and Shahbaz, M. and Yamamoto, A. and Acda, M.N. (2018) The effect of industrial waste coal bottom ash as catalyst in catalytic pyrolysis of rice husk for syngas production. Energy Conversion and Management, 165. pp. 541-554.

Leong, K.-Y. and Loo, S.-L. and Bashir, M.J.K. and Oh, W.-D. and Rao, P.V. and Lim, J.-W. (2018) Bioregeneration of spent activated carbon: Review of key factors and recent mathematical models of kinetics. Chinese Journal of Chemical Engineering, 26 (5). pp. 893-902.

Lemma, T.A. (2018) Preface. Studies in Computational Intelligence, 743. vii-viii.

Lemma, T.A. (2018) Intelligent Fault Detection and Diagnostics. Studies in Computational Intelligence, 743. pp. 99-117.

Lemma, T.A. (2018) Application Studies, Part-I: Model Identification and Validation. Studies in Computational Intelligence, 743. pp. 119-169.

Lemma, T.A. (2018) Model Uncertainity, Fault Detection and Diagnostics. Studies in Computational Intelligence, 743. pp. 75-97.

Lemma, T.A. (2018) Model Identification Using Neuro-Fuzzy Approach. Studies in Computational Intelligence, 743. pp. 37-74.

Lemma, T.A. (2018) Literature Review. Studies in Computational Intelligence, 743. pp. 11-35.

Lemma, T.A. (2018) Introduction. Studies in Computational Intelligence, 743. pp. 1-10.

Lal, B. and Shariff, A.M. and Mukhtar, H. and Nasir, Q. and Qasim, A. (2018) An overview of cryogenic separation techniques for natural gas with high CO2 content. Journal of Engineering and Applied Sciences, 13 (8). pp. 2152-2155.

Lai, G.T. and Mang, W.J. and Rafek, A.G. and Serasa, A.S. and Mazlan, N.A. and Razib, A.M.M. and Hussin, A. and Ern, L.K. and Mohamed, T.R. (2018) Stability assessment of limestone cave: Batu Caves, Selangor, Malaysia. Sains Malaysiana, 47 (1). pp. 59-66.

Lee, K. and Lee, J. and Dass, S.C. (2018) Inference for differential equation models using relaxation via dynamical systems. Computational Statistics and Data Analysis, 127. pp. 116-134.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. and Jusoh, N. and Ahmad, F. (2018) An atomistic simulation towards elucidation of operating temperature effect in CO2 swelling of polysulfone polymeric membranes. Journal of Natural Gas Science and Engineering, 57. pp. 135-154.

Leong, W.-H. and Lim, J.-W. and Lam, M.-K. and Uemura, Y. and Ho, Y.-C. (2018) Third generation biofuels: A nutritional perspective in enhancing microbial lipid production. Renewable and Sustainable Energy Reviews, 91. pp. 950-961.

Loy, A.C.M. and Gan, D.K.W. and Yusup, S. and Chin, B.L.F. and Lam, M.K. and Shahbaz, M. and Unrean, P. and Acda, M.N. and Rianawati, E. (2018) Thermogravimetric kinetic modelling of in-situ catalytic pyrolytic conversion of rice husk to bioenergy using rice hull ash catalyst. Bioresource Technology, 261. pp. 213-222.

Leong, W.-H. and Lim, J.-W. and Lam, M.-K. and Uemura, Y. and Ho, C.-D. and Ho, Y.-C. (2018) Co-cultivation of activated sludge and microalgae for the simultaneous enhancements of nitrogen-rich wastewater bioremediation and lipid production. Journal of the Taiwan Institute of Chemical Engineers, 87. pp. 216-224.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. and Jusoh, N. and Ahmad, F. (2018) An atomistic simulation towards elucidation of operating temperature effect in CO2 swelling of polysulfone polymeric membranes. Journal of Natural Gas Science and Engineering, 57. pp. 135-154.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. (2018) Thickness dependent penetrant gas transport properties and separation performance within ultrathin polysulfone membrane: Insights from atomistic molecular simulation. Journal of Polymer Science, Part B: Polymer Physics, 56 (2). pp. 131-158.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. and Jusoh, N. and Ahmad, F. (2018) An atomistic simulation towards elucidation of operating temperature effect in CO2 swelling of polysulfone polymeric membranes. Journal of Natural Gas Science and Engineering, 57. pp. 135-154.

Lai, L.S. and Yeong, Y.F. and Lau, K.K. and Azmi, M.S. and Chew, T.L. (2018) Zeolitic Imidazolate Framework-8 Membrane for H2/CO2 Separation: Experimental and Modeling. IOP Conference Series: Materials Science and Engineering, 318 (1).

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. (2018) Thickness dependent penetrant gas transport properties and separation performance within ultrathin polysulfone membrane: Insights from atomistic molecular simulation. Journal of Polymer Science, Part B: Polymer Physics, 56 (2). pp. 131-158.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. and Jusoh, N. and Ahmad, F. (2018) An atomistic simulation towards elucidation of operating temperature effect in CO2 swelling of polysulfone polymeric membranes. Journal of Natural Gas Science and Engineering, 57. pp. 135-154.

Lai, L.S. and Yeong, Y.F. and Lau, K.K. and Azmi, M.S. and Chew, T.L. (2018) Zeolitic Imidazolate Framework-8 Membrane for H2/CO2 Separation: Experimental and Modeling. IOP Conference Series: Materials Science and Engineering, 318 (1).

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. (2018) Thickness dependent penetrant gas transport properties and separation performance within ultrathin polysulfone membrane: Insights from atomistic molecular simulation. Journal of Polymer Science, Part B: Polymer Physics, 56 (2). pp. 131-158.

Lee, S.-P. and Mellon, N. and Shariff, A.M. and Leveque, J.-M. (2018) High-pressure CO2-CH4 selective adsorption on covalent organic polymer. Journal of Natural Gas Science and Engineering, 50. pp. 139-146.

Lal, B. and Shariff, A.M. and Mukhtar, H. and Nasir, Q. and Qasim, A. (2018) An overview of cryogenic separation techniques for natural gas with high CO2 content. Journal of Engineering and Applied Sciences, 13 (8). pp. 2152-2155.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. and Jusoh, N. and Ahmad, F. (2018) An atomistic simulation towards elucidation of operating temperature effect in CO2 swelling of polysulfone polymeric membranes. Journal of Natural Gas Science and Engineering, 57. pp. 135-154.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. (2018) Thickness dependent penetrant gas transport properties and separation performance within ultrathin polysulfone membrane: Insights from atomistic molecular simulation. Journal of Polymer Science, Part B: Polymer Physics, 56 (2). pp. 131-158.

Lock, Serene Sow Mun and Lau, Kok Keong and Shariff, Azmi Mohd and Yeong, Yin Fong and Bustam, Mohamad Azmi (2018) Thickness dependent penetrant gas transport properties and separation performance within ultrathin polysulfone membrane: Insights from atomistic molecular simulation. Journal of Polymer Science Part B: Polymer Physics, 56 (2). pp. 131-158.

M

Majid, Noor Diana Abdul and Zaini, Dzulkarnain and Shariff, Azmi Mohd (2018) Managing Employee Participation based on OSHA�s Process Safety Management Requirements. International Journal of Engineering & Technology, 7 (3.26). pp. 13-18.

Mushtaq, Asim and Mukhtar, Hilmi and Shariff, Azmi Mohd (2018) Synthesis and characterization of polymeric blend membranes enhanced by monoethanolamine for CO2/CH4 separation. Bulgarian Chemical Communications. p. 575.

Mohsin, Hanan Mohamed and Johari, Khairiraihanna and Shariff, Azmi Mohd (2018) Virgin coconut oil (VCO) and potassium glycinate (PG) mixture as absorbent for carbon dioxide capture. Fuel, 232. pp. 454-462.

Muhammad, Anuar Faua'ad Syed and Awad, Ali and Saidur, R and Masiran, Nurliyana and Salam, Abdus and Abdullah, Bawadi (2018) Recent advances in cleaner hydrogen productions via thermo-catalytic decomposition of methane: admixture with hydrocarbon. international journal of hydrogen energy, 43 (41). pp. 18713-18734.

Mohshim, Dzeti Farhah and Mukhtar, Hilmi and Man, Zakaria (2018) A study on carbon dioxide removal by blending the ionic liquid in membrane synthesis. Separation and Purification Technology, 196. pp. 20-26.

Mushtaq, Asim and Mukhtar, Hilmi and Shariff, Azmi Mohd (2018) Synthesis and characterization of polymeric blend membranes enhanced by monoethanolamine for CO2/CH4 separation. Bulgarian Chemical Communications. p. 575.

Murugiah, PS and Oh, PC and Lau, KK (2018) Facilitated transport graphene oxide based PPOdm mixed matrix membrane for CO2 separation. Materials Today: Proceedings, 5 (10). pp. 21818-21824.

Murugiah, PS and Oh, PC and Lau, KK (2018) The performance of PPOdm-CNF Mixed Matrix Membrane for CO2/CH4 separation. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5086-5096.

Mubashir, M and Fong, YY and Leng, CT and Keong, LK (2018) Enhanced gases separation of cellulose acetate membrane using N-methyl-1-2 pyrrolidone as fabrication solvent. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 4978-4986.

Mubashir, Muhammad and Fong, Yeong Yin and Leng, Chew Thiam and Keong, Lau Kok (2018) Issues and Current Trends of Hollow-Fiber Mixed-Matrix Membranes for CO2 Separation from N2 and CH4. Chemical Engineering & Technology, 41 (2). pp. 235-252.

Murugiah, Pannir Selvam and Oh, Pei Ching and Lau, Kok Keong (2018) Impregnation of carbonaceous nanofibers into glassy polymer-based composite membrane for CO2 separation. Chinese Journal of Chemical Engineering, 26 (11). pp. 2385-2390.

Mubashir, Muhammad and Yeong, Yin Fong and Lau, Kok Keong and Chew, Thiam Leng and Norwahyu, Jusoh (2018) Efficient CO2/N2 and CO2/CH4 separation using NH2-MIL-53 (Al)/cellulose acetate (CA) mixed matrix membranes. Separation and Purification Technology, 199. pp. 140-151.

Mubashir, M and Yeong, YF and Chew, TL and Lau, KK (2018) Effect of Take-up Speed on the Fabrication of Cellulose Acetate Hollow Fibre Membrane in CO2 Separation from N2 and CH4. Journal of Applied Membrane Science & Technology, 22 (2).

Mubashir, Muhammad and Fong, Yeong Yin and Leng, Chew Thiam and Keong, Lau Kok (2018) Prediction of CO2 permeability in NH2-MIL-53 (Al)/cellulose acetate mixed matrix membranes using theoretical models. International Journal of Integrated Engineering, 10 (5).

Majeed, Z. and Mansor, N. and Ajab, Z. and Man, Z. and Sarwono, A. (2018) Kraft lignin ameliorates degradation resistance of starch in urea delivery biocomposites. Polymer Testing, 65. pp. 398-406.

Mohammed, B.S. and Adamu, M. (2018) Mechanical performance of roller compacted concrete pavement containing crumb rubber and nano silica. Construction and Building Materials, 159. pp. 234-251.

Mohammed, B.S. and Khed, V.C. and Nuruddin, M.F. (2018) Rubbercrete mixture optimization using response surface methodology. Journal of Cleaner Production, 171. pp. 1605-1621.

Mohammed, B.S. and Adamu, M. (2018) Non-destructive evaluation of nano silica-modified roller-compacted rubbercrete using combined SonReb and response surface methodology. Road Materials and Pavement Design. pp. 1-21.

Mumtaz, W. and Saad, M.N.B.M. and Kamel, N. and Ali, S.S.A. and Malik, A.S. (2018) An EEG-based functional connectivity measure for automatic detection of alcohol use disorder. Artificial Intelligence in Medicine, 84. pp. 79-89.

Mahamad, S. and Sulaiman, S. and Sofian, N.M. (2018) Analyzing users' performance interacting with a digitized traditional game on multi-touch display using fitts's law. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-6). pp. 25-28.

Machmudah, A. and Parman, S. and Baharom, M.B. (2018) Continuous path planning of Kinematically redundant manipulator using Particle Swarm Optimization. International Journal of Advanced Computer Science and Applications, 9 (3). pp. 207-217.

Mohammad Zubir, W.M.A. and Abdul Aziz, I. and Jaafar, J. and Hasan, M.H. (2018) Inference Algorithms in Latent Dirichlet Allocation for Semantic Classification. Advances in Intelligent Systems and Computing, 662. pp. 173-184.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. and Zainal, A.E.Z. and Firmansyah, F. (2018) Experimental investigation of ignition timing on the performance and emission characteristics of a crank-rocker engine. International Journal of Vehicle Structures and Systems, 10 (2). pp. 146-149.

Murshid, G. and Ghaedi, H. and Ayoub, M. and Garg, S. and Ahmad, W. (2018) Experimental and correlation of viscosity and refractive index of non-aqueous system of diethanolamine (DEA) and dimethylformamide (DMF) for CO2 capture. Journal of Molecular Liquids, 250. pp. 162-170.

Mumtaz, A. and Mohamed, N.M. and Irshad, M.I. and Yar, A. and Mohamed Saheed, M.S. (2018) Mutual effect of extrinsic defects and electronic carbon traps of M-TiO2 (M = V, Co, Ni) nanorod arrays on photoexcited charge extraction of CdS for superior photoelectrochemical activity of hydrogen production. International Journal of Hydrogen Energy, 43 (31). pp. 14388-14405.

Mohd Zabidi, N.A. and Tuan Sulong, T.S. and Ali, S. (2018) Synthesis and characterization of Cu/ZnO catalyst on carbon nanotubes and Al2O3 supports. Materials Science Forum, 916 MS. pp. 139-143.

Mahdi, F.P. and Vasant, P. and Abdullah-Al-Wadud, M. and Watada, J. and Kallimani, V. (2018) Quantum-Behaved Bat Algorithm for Combined Economic Emission Dispatch Problem with Valve-Point Effect. Lecture Notes in Electrical Engineering, 465. pp. 923-933.

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the static and dynamic modulus of elasticity of roller compacted rubbercrete using response surface methodology. International Journal of GEOMATE, 14 (41). pp. 186-192.

Muzammel, M. and Yusoff, M.Z. and Meriaudeau, F. (2018) Event-Related Potential Responses of Motorcyclists Towards Rear End Collision Warning System. IEEE Access, 6. pp. 31609-31620.

Merican, A.M. and Abdulra'uf, M.Y. and Sulam, M. (2018) The representation of George Town Heritage: A two-space analysis of local alienation. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 137-152.

Moniruzzaman, M. and Mahmood, H. and Goto, M. (2018) Ionic Liquid Based Nanocarriers for Topical and Transdermal Drug Delivery. RSC Smart Materials, 2018-J (28). pp. 390-403.

Melo, H. and Zhang, H. and Vasant, P. and Watada, J. (2018) Training method for a feed forward neural network based on meta-heuristics. Smart Innovation, Systems and Technologies, 82. pp. 378-385.

Mahdi, F.P. and Vasant, P. and Kallimani, V. and Watada, J. and Fai, P.Y.S. and Abdullah-Al-Wadud, M. (2018) A holistic review on optimization strategies for combined economic emission dispatch problem. Renewable and Sustainable Energy Reviews, 81. pp. 3006-3020.

Mustapa, M.A. and Othman, W.A.F.W. and Abu Bakar, E. and Othman, A.R. (2018) Development of pole-like tree spiral climbing robot. Lecture Notes in Mechanical Engineering (978981). pp. 285-293.

Muhammad, M.M. and Yusof, K.W. and Ul Mustafa, M.R. and Zakaria, N.A. and Ghani, A.Ab. (2018) Artificial neural network applications for predicting drag coefficient in flexible vegetated channels. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 99-102.

Mohd Arif, N.N. and Abidin, S.Z. and Osazuwa, O.U. and Vo, D.-V.N. and Azizan, M.T. and Taufiq-Yap, Y.H. (2018) Hydrogen production via CO2 dry reforming of glycerol over Re�Ni/CaO catalysts. International Journal of Hydrogen Energy.

Moozarm Nia, P. and Abouzari-Lotf, E. and Arshad, A. and Nasef, M.M. and Ripin, A. (2018) Tunable electrochemical approach for reduction of graphene oxide: Taguchi-assisted chemical and structural optimization. Journal of the Electrochemical Society, 165 (9). E429-E438.

Memon, M.A. and Salleh, R. and Nordin, S.M. and Cheah, J.-H. and Ting, H. and Chuah, F. (2018) Person-organisation fit and turnover intention: the mediating role of work engagement. Journal of Management Development, 37 (3). pp. 285-298.

masaharu, komiyama (2018) Improvement of energy density and energy yield of oil palm biomass by torrefaction in combustion gas. Improvement of energy density and energy yield of oil palm biomass by torrefaction in combustion gas, 458.

masaharu, komiyama (2018) One pot biodiesel production from wet Chlorella vulgaris using supercritical methanol with oxide catalysts. One pot biodiesel production from wet Chlorella vulgaris using supercritical methanol with oxide catalysts, 2016.

Mayoral, E. and Santos, A. and Gámez Vintaned, J.A. and Ledesma-Vazquez, J. and Baarli, B.G. and Cachão, M. and da Silva, C.M. and Johnson, M.E. (2018) Upper Pleistocene trace fossils from Ponta das Bicudas, Santiago, Cape Verde Islands: Systematics, taphonomy and palaeoenvironmetal evolution. Palaeogeography, Palaeoclimatology, Palaeoecology, 498. pp. 83-98.

Mohammad, S.T. and Al-Kayiem, H.H. and Assadi, M.K. and Gilani, S.I.U.H. and Khlief, A.K. (2018) Performance and Simulation of a Stand-alone Parabolic Trough Solar Thermal Power Plant. IOP Conference Series: Earth and Environmental Science, 150 (1).

Mohshim, D.F. and Mukhtar, H. and Man, Z. (2018) A study on carbon dioxide removal by blending the ionic liquid in membrane synthesis. Separation and Purification Technology, 196. pp. 20-26.

Masri, A.N. and Abdul Mutalib, M.I. and Aminuddin, N.F. and Lévêque, J.-M. (2018) Novel SO3H-functionalized dicationic ionic liquids � A comparative study for esterification reaction by ultrasound cavitation and mechanical stirring for biodiesel production. Separation and Purification Technology, 196. pp. 106-114.

Mohamed, N.M. and Bashiri, R. and Kait, C.F. and Sufian, S. (2018) Photocatalytic water splitting over titania supported copper and nickel oxide in photoelectrochemical cell; Optimization of photoconversion efficiency. IOP Conference Series: Materials Science and Engineering, 348 (1).

Matsumoto, Y. and Watada, J. (2018) Knowledge acquisition from rough sets using merged decision rules. Journal of Advanced Computational Intelligence and Intelligent Informatics, 22 (3). pp. 404-410.

Muhthassim, B. and Thian, X.K. and Hasan, K.N.Md. (2018) Energy Harvesting from Salinity Gradient. IOP Conference Series: Earth and Environmental Science, 140 (1).

Mazlina, M. and Liew, M.S. and Adnan, A. and Harahap, I.S.H. and Hamid, N.A. (2018) Determination of Shear Wave Velocity in Offshore Terengganu for Ground Response Analysis. IOP Conference Series: Earth and Environmental Science, 140 (1).

Mazlan, N.A. and Lai, G.T. and Razib, A.M.M. and Rafek, A.G. and Serasa, A.S. and Simon, N. and Surip, N. and Ern, L.K. and Mohamed, T.R. (2018) The geomechanical strength of carbonate rock in Kinta valley, Ipoh, Perak Malaysia. AIP Conference Proceedings, 1940.

Musthafa, N.H. and Sulaiman, S. (2018) An investigation of the current practice to support upper limb rehabilitation among advanced stroke survivors. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1). pp. 280-285.

Mumtaz, W. and Vuong, P.L. and Malik, A.S. and Rashid, R.B.A. (2018) A review on EEG-based methods for screening and diagnosing alcohol use disorder. Cognitive Neurodynamics, 12 (2). pp. 141-156.

Meyghani, B. and Awang, M.B. and Emamian, S. and Akinlabi, E.T. (2018) A comparison between temperature dependent and constant Young's modulus values in investigating the effect of the process parameters on thermal behaviour during friction stir welding: Vergleich zwischen den temperaturabhängigen und konstanten Elastizitätsmodulwerten in der Untersuchung der Prozessparameter auf die Wärmewirkung beim Rührreibschwei�en. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 427-434.

Manaf, N.A. and Saad, B. and Mohamed, M.H. and Wilson, L.D. and Latiff, A.A. (2018) Cyclodextrin based polymer sorbents for micro-solid phase extraction followed by liquid chromatography tandem mass spectrometry in determination of endogenous steroids. Journal of Chromatography A, 1543. pp. 23-33.

Myint, K.C. and Matori, A.N. and Gohari, A. (2018) Application of GNSS Methods for Monitoring Offshore Platform Deformation. E3S Web of Conferences, 34.

Mehat, N.M. and Zakarria, N.S. and Kamaruddin, S. (2018) Optimization of Recycled Glass Fibre-Reinforced Plastics Gear via Integration of the Taguchi Method and Grey Relational Analysis. IOP Conference Series: Materials Science and Engineering, 318 (1).

Momeni, M.S. and Ridha, S. and Hosseini, S.J. and Meyghani, B. and Emamian, S.S. (2018) Bit selection using field drilling data and mathematical investigation. IOP Conference Series: Materials Science and Engineering, 328 (1).

Moayedfar, M. and Hanaei, H. and Rani, A.M. and Bin Musa, M.A. and Momeni, M.S. (2018) Early Shear Failure Prediction in Incremental Sheet Forming Process Using FEM and ANN. IOP Conference Series: Materials Science and Engineering, 328 (1).

Muhammad, M.M. and Yusof, K.W. and Mustafa, M.R.U. and Zakaria, N.A. and Ab Ghani, A. (2018) Prediction models for flow resistance in flexible vegetated channels. International Journal of River Basin Management. pp. 1-11.

Murugiah, P.S. and Oh, P.C. and Lau, K.K. (2018) The performance of PPOdm-CNF Mixed Matrix Membrane for CO2/CH4 separation. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5086-5096.

Mubashir, M. and Fong, Y.Y. and Leng, C.T. and Keong, L.K. (2018) Enhanced gases separation of cellulose acetate membrane using N-Methyl-1-2 pyrrolidone as fabrication solvent. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 4978-4986.

Mahdi, F.P. and Vasant, P. and Abdullah-Al-Wadud, M. and Watada, J. and Kallimani, V. (2018) A quantum-inspired particle swarm optimization approach for environmental/economic power dispatch problem using cubic criterion function. International Transactions on Electrical Energy Systems, 28 (3).

Muhammad, M.B. and Sarwar, U. and Tahan, M. and Karim, Z.A.A. (2018) Intelligent fault diagnostic model for rotating machinery. IEEE International Conference on Industrial Engineering and Engineering Management, 2017-D. pp. 1858-1862.

Mokhtar, A.A. and Muhammad, M. and Hussin, H. and Majid, M.A.A. (2018) Assessing performance of aging air-cooled heat exchangers using inspection and performance data. IEEE International Conference on Industrial Engineering and Engineering Management, 2017-D. pp. 1490-1494.

Mubin, M.A. and Marzuki, A. and Mustaffa, M.T. and Ain, M.F. and Zulkifli, T.Z.A. (2018) Design and simulation of a low-power 0.18 μm CMOS MedRadio band LNA. Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics, 2017-O. pp. 113-116.

Mubashir, M. and Fong, Y.Y. and Leng, C.T. and Keong, L.K. (2018) Issues and Current Trends of Hollow-Fiber Mixed-Matrix Membranes for CO2 Separation from N2 and CH4. Chemical Engineering and Technology, 41 (2). pp. 235-252.

Malakahmad, A. and Manan, T.S.B.A. and Sivapalan, S. and Khan, T. (2018) Genotoxicity assessment of raw and treated water samples using Allium cepa assay: evidence from Perak River, Malaysia. Environmental Science and Pollution Research, 25 (6). pp. 5421-5436.

Murtaza, M. and Rahman, A.H.A. and Sum, C.W. and Konjing, Z. (2018) Facies associations, depositional environments and stratigraphic framework of the Early Miocene-Pleistocene successions of the Mukah-Balingian Area, Sarawak, Malaysia. Journal of Asian Earth Sciences, 152. pp. 23-38.

Momeni, M. and Hosseini, S.J. and Ridha, S. and Laruccia, M.B. and Liu, X. (2018) An optimum drill bit selection technique using artificial neural networks and genetic algorithms to increase the rate of penetration. Journal of Engineering Science and Technology, 13 (2). pp. 361-372. (Submitted)

Mohmmed, A.O. and Nasif, M.S. and Al-Kayiem, H.H. (2018) Experimental data for the slug two-phase flow characteristics in horizontal pipeline. Data in Brief, 16. pp. 527-530.

Mumtaz, W. and Ali, S.S.A. and Yasin, M.A.M. and Malik, A.S. (2018) A machine learning framework involving EEG-based functional connectivity to diagnose major depressive disorder (MDD). Medical and Biological Engineering and Computing, 56 (2). pp. 233-246.

Mohsin, H.M. and Johari, K. and Shariff, A.M. (2018) Virgin coconut oil (VCO) and potassium glycinate (PG) mixture as absorbent for carbon dioxide capture. Fuel, 232. pp. 454-462.

Mohsin, H.M. and Johari, K. and Shariff, A.M. (2018) Virgin coconut oil (VCO) and potassium glycinate (PG) mixture as absorbent for carbon dioxide capture. Fuel, 232. pp. 454-462.

Mohammad, S.T. and Al-Kayiem, H.H. and Assadi, M.K. and Sabir, O. and Khlief, A.K. (2018) An integrated program of a stand-Alone parabolic trough solar thermal power plant: Code description and test. Case Studies in Thermal Engineering, 12. pp. 26-37.

Moshikur, R.M. and Chowdhury, M.R. and Wakabayashi, R. and Tahara, Y. and Moniruzzaman, M. and Goto, M. (2018) Characterization and cytotoxicity evaluation of biocompatible amino acid esters used to convert salicylic acid into ionic liquids. International Journal of Pharmaceutics, 546 (1-2). pp. 31-38.

Mertens, M. and Bilad, M.R. and Gebreyohannes, A.Y. and Marbelia, L. and Vankelecom, I.F.J. (2018) Membrane development for improved performance of a magnetically induced vibration system for anaerobic sludge filtration. Separation and Purification Technology, 200. pp. 120-129.

Majeed, Z. and Mansor, N. and Ajab, Z. and Man, Z. and Sarwano, A. and Ahmad, B. and Hussain, Z. (2018) Lignin linked to slow biodegradability of urea-crosslinked starch in an anaerobic soil environment. E-Polymers.

Marbelia, L. and Bilad, M.R. and Maes, S. and Arafat, H.A. and Vankelecom, I.F.J. (2018) Poly(vinylidene fluoride)-Based Membranes for Microalgae Filtration. Chemical Engineering and Technology, 41 (7). pp. 1305-1312.

Mubashir, M. and Yeong, Y.F. and Lau, K.K. and Chew, T.L. and Norwahyu, J. (2018) Efficient CO2/N2 and CO2/CH4 separation using NH2-MIL-53(Al)/cellulose acetate (CA) mixed matrix membranes. Separation and Purification Technology, 199. pp. 140-151.

Mohamed, M. and Yusup, S. and Quitain, A.T. and Kida, T. (2018) Utilization of rice husk to enhance calcium oxide-based sorbent prepared from waste cockle shells for cyclic CO2 capture in high-temperature condition. Environmental Science and Pollution Research. pp. 1-15.

Muthuvalu, M.S. and Galligani, E. and Majahar Ali, M.K. and Sulaiman, J. and Lebelo, R.S. (2018) Performance analysis of Arithmetic Mean method for solving composite 6-point closed Newton�Cotes quadrature algebraic equation. Asian-European Journal of Mathematics.

Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. and Hoong, C.Y. and Adamu, M. (2018) Properties of nano-silica modified pervious concrete. Case Studies in Construction Materials, 8. pp. 409-422.

Mohammed, B.S. and Liew, M.S. and S Alaloul, W. and Al-Fakih, A. and Ibrahim, W. and Adamu, M. (2018) Development of rubberized geopolymer interlocking bricks. Case Studies in Construction Materials, 8. pp. 401-408.

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Akil, H.M. (2018) Ionic liquid pretreatment at high solids loading: A clean approach for fabrication of renewable resource based particulate composites. Polymer Composites, 39 (6). pp. 1994-2003.

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the effect of crumb rubber and nano silica on the properties of high volume fly ash roller compacted concrete pavement using non-destructive techniques. Case Studies in Construction Materials, 8. pp. 380-391.

Mayoral, E. and Santos, A. and Gámez Vintaned, J.A. and Ledesma-Vazquez, J. and Baarli, B.G. and Cachão, M. and da Silva, C.M. and Johnson, M.E. (2018) Upper Pleistocene trace fossils from Ponta das Bicudas, Santiago, Cape Verde Islands: Systematics, taphonomy and palaeoenvironmetal evolution. Palaeogeography, Palaeoclimatology, Palaeoecology, 498. pp. 83-98.

Moosazadeh, S. and Namazi, E. and Aghababaei, H. and Marto, A. and Mohamad, H. and Hajihassani, M. (2018) Prediction of building damage induced by tunnelling through an optimized artificial neural network. Engineering with Computers. pp. 1-13.

Mohshim, D.F. and Mukhtar, H. and Man, Z. (2018) A study on carbon dioxide removal by blending the ionic liquid in membrane synthesis. Separation and Purification Technology, 196. pp. 20-26.

Masri, A.N. and Abdul Mutalib, M.I. and Aminuddin, N.F. and Lévêque, J.-M. (2018) Novel SO3H-functionalized dicationic ionic liquids � A comparative study for esterification reaction by ultrasound cavitation and mechanical stirring for biodiesel production. Separation and Purification Technology, 196. pp. 106-114.

Matsumoto, Y. and Watada, J. (2018) Knowledge acquisition from rough sets using merged decision rules. Journal of Advanced Computational Intelligence and Intelligent Informatics, 22 (3). pp. 404-410.

Mubashir, M. and Fong, Y.Y. and Leng, C.T. and Keong, L.K. (2018) Enhanced gases separation of cellulose acetate membrane using N-Methyl-1-2 pyrrolidone as fabrication solvent. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 4978-4986.

Mahdi, F.P. and Vasant, P. and Abdullah-Al-Wadud, M. and Watada, J. and Kallimani, V. (2018) A quantum-inspired particle swarm optimization approach for environmental/economic power dispatch problem using cubic criterion function. International Transactions on Electrical Energy Systems, 28 (3).

Mumtaz, W. and Saad, M.N.B.M. and Kamel, N. and Ali, S.S.A. and Malik, A.S. (2018) An EEG-based functional connectivity measure for automatic detection of alcohol use disorder. Artificial Intelligence in Medicine, 84. pp. 79-89.

Mahamad, S. and Sulaiman, S. and Sofian, N.M. (2018) Analyzing users' performance interacting with a digitized traditional game on multi-touch display using fitts's law. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-6). pp. 25-28.

Machmudah, A. and Parman, S. and Baharom, M.B. (2018) Continuous path planning of Kinematically redundant manipulator using Particle Swarm Optimization. International Journal of Advanced Computer Science and Applications, 9 (3). pp. 207-217.

Mohammad Zubir, W.M.A. and Abdul Aziz, I. and Jaafar, J. and Hasan, M.H. (2018) Inference Algorithms in Latent Dirichlet Allocation for Semantic Classification. Advances in Intelligent Systems and Computing, 662. pp. 173-184.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. and Zainal, A.E.Z. and Firmansyah, F. (2018) Experimental investigation of ignition timing on the performance and emission characteristics of a crank-rocker engine. International Journal of Vehicle Structures and Systems, 10 (2). pp. 146-149.

Murshid, G. and Ghaedi, H. and Ayoub, M. and Garg, S. and Ahmad, W. (2018) Experimental and correlation of viscosity and refractive index of non-aqueous system of diethanolamine (DEA) and dimethylformamide (DMF) for CO2 capture. Journal of Molecular Liquids, 250. pp. 162-170.

Mumtaz, A. and Mohamed, N.M. and Irshad, M.I. and Yar, A. and Mohamed Saheed, M.S. (2018) Mutual effect of extrinsic defects and electronic carbon traps of M-TiO2 (M = V, Co, Ni) nanorod arrays on photoexcited charge extraction of CdS for superior photoelectrochemical activity of hydrogen production. International Journal of Hydrogen Energy, 43 (31). pp. 14388-14405.

Mohd Zabidi, N.A. and Tuan Sulong, T.S. and Ali, S. (2018) Synthesis and characterization of Cu/ZnO catalyst on carbon nanotubes and Al2O3 supports. Materials Science Forum, 916 MS. pp. 139-143.

Mahdi, F.P. and Vasant, P. and Abdullah-Al-Wadud, M. and Watada, J. and Kallimani, V. (2018) Quantum-Behaved Bat Algorithm for Combined Economic Emission Dispatch Problem with Valve-Point Effect. Lecture Notes in Electrical Engineering, 465. pp. 923-933.

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the static and dynamic modulus of elasticity of roller compacted rubbercrete using response surface methodology. International Journal of GEOMATE, 14 (41). pp. 186-192.

Muzammel, M. and Yusoff, M.Z. and Meriaudeau, F. (2018) Event-Related Potential Responses of Motorcyclists Towards Rear End Collision Warning System. IEEE Access, 6. pp. 31609-31620.

Merican, A.M. and Abdulra'uf, M.Y. and Sulam, M. (2018) The representation of George Town Heritage: A two-space analysis of local alienation. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 137-152.

Moniruzzaman, M. and Mahmood, H. and Goto, M. (2018) Ionic Liquid Based Nanocarriers for Topical and Transdermal Drug Delivery. RSC Smart Materials, 2018-J (28). pp. 390-403.

Melo, H. and Zhang, H. and Vasant, P. and Watada, J. (2018) Training method for a feed forward neural network based on meta-heuristics. Smart Innovation, Systems and Technologies, 82. pp. 378-385.

Mahdi, F.P. and Vasant, P. and Kallimani, V. and Watada, J. and Fai, P.Y.S. and Abdullah-Al-Wadud, M. (2018) A holistic review on optimization strategies for combined economic emission dispatch problem. Renewable and Sustainable Energy Reviews, 81. pp. 3006-3020.

Mustapa, M.A. and Othman, W.A.F.W. and Abu Bakar, E. and Othman, A.R. (2018) Development of pole-like tree spiral climbing robot. Lecture Notes in Mechanical Engineering (978981). pp. 285-293.

Muhammad, M.M. and Yusof, K.W. and Ul Mustafa, M.R. and Zakaria, N.A. and Ghani, A.Ab. (2018) Artificial neural network applications for predicting drag coefficient in flexible vegetated channels. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 99-102.

Mohd Arif, N.N. and Abidin, S.Z. and Osazuwa, O.U. and Vo, D.-V.N. and Azizan, M.T. and Taufiq-Yap, Y.H. (2018) Hydrogen production via CO2 dry reforming of glycerol over Re�Ni/CaO catalysts. International Journal of Hydrogen Energy.

Moozarm Nia, P. and Abouzari-Lotf, E. and Arshad, A. and Nasef, M.M. and Ripin, A. (2018) Tunable electrochemical approach for reduction of graphene oxide: Taguchi-assisted chemical and structural optimization. Journal of the Electrochemical Society, 165 (9). E429-E438.

Memon, M.A. and Salleh, R. and Nordin, S.M. and Cheah, J.-H. and Ting, H. and Chuah, F. (2018) Person-organisation fit and turnover intention: the mediating role of work engagement. Journal of Management Development, 37 (3). pp. 285-298.

Mohsin, H.M. and Johari, K. and Shariff, A.M. (2018) Virgin coconut oil (VCO) and potassium glycinate (PG) mixture as absorbent for carbon dioxide capture. Fuel, 232. pp. 454-462.

Mohammad, S.T. and Al-Kayiem, H.H. and Assadi, M.K. and Sabir, O. and Khlief, A.K. (2018) An integrated program of a stand-Alone parabolic trough solar thermal power plant: Code description and test. Case Studies in Thermal Engineering, 12. pp. 26-37.

Moshikur, R.M. and Chowdhury, M.R. and Wakabayashi, R. and Tahara, Y. and Moniruzzaman, M. and Goto, M. (2018) Characterization and cytotoxicity evaluation of biocompatible amino acid esters used to convert salicylic acid into ionic liquids. International Journal of Pharmaceutics, 546 (1-2). pp. 31-38.

Mertens, M. and Bilad, M.R. and Gebreyohannes, A.Y. and Marbelia, L. and Vankelecom, I.F.J. (2018) Membrane development for improved performance of a magnetically induced vibration system for anaerobic sludge filtration. Separation and Purification Technology, 200. pp. 120-129.

Majeed, Z. and Mansor, N. and Ajab, Z. and Man, Z. and Sarwano, A. and Ahmad, B. and Hussain, Z. (2018) Lignin linked to slow biodegradability of urea-crosslinked starch in an anaerobic soil environment. E-Polymers.

Marbelia, L. and Bilad, M.R. and Maes, S. and Arafat, H.A. and Vankelecom, I.F.J. (2018) Poly(vinylidene fluoride)-Based Membranes for Microalgae Filtration. Chemical Engineering and Technology, 41 (7). pp. 1305-1312.

Mubashir, M. and Yeong, Y.F. and Lau, K.K. and Chew, T.L. and Norwahyu, J. (2018) Efficient CO2/N2 and CO2/CH4 separation using NH2-MIL-53(Al)/cellulose acetate (CA) mixed matrix membranes. Separation and Purification Technology, 199. pp. 140-151.

Mohamed, M. and Yusup, S. and Quitain, A.T. and Kida, T. (2018) Utilization of rice husk to enhance calcium oxide-based sorbent prepared from waste cockle shells for cyclic CO2 capture in high-temperature condition. Environmental Science and Pollution Research. pp. 1-15.

Muthuvalu, M.S. and Galligani, E. and Majahar Ali, M.K. and Sulaiman, J. and Lebelo, R.S. (2018) Performance analysis of Arithmetic Mean method for solving composite 6-point closed Newton�Cotes quadrature algebraic equation. Asian-European Journal of Mathematics.

Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. and Hoong, C.Y. and Adamu, M. (2018) Properties of nano-silica modified pervious concrete. Case Studies in Construction Materials, 8. pp. 409-422.

Mohammed, B.S. and Liew, M.S. and S Alaloul, W. and Al-Fakih, A. and Ibrahim, W. and Adamu, M. (2018) Development of rubberized geopolymer interlocking bricks. Case Studies in Construction Materials, 8. pp. 401-408.

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Akil, H.M. (2018) Ionic liquid pretreatment at high solids loading: A clean approach for fabrication of renewable resource based particulate composites. Polymer Composites, 39 (6). pp. 1994-2003.

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the effect of crumb rubber and nano silica on the properties of high volume fly ash roller compacted concrete pavement using non-destructive techniques. Case Studies in Construction Materials, 8. pp. 380-391.

Mubashir, M. and Yeong, Y.F. and Lau, K.K. and Chew, T.L. and Norwahyu, J. (2018) Efficient CO2/N2 and CO2/CH4 separation using NH2-MIL-53(Al)/cellulose acetate (CA) mixed matrix membranes. Separation and Purification Technology, 199. pp. 140-151.

Murugiah, P.S. and Oh, P.C. and Lau, K.K. (2018) The performance of PPOdm-CNF Mixed Matrix Membrane for CO2/CH4 separation. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5086-5096.

Mubashir, M. and Fong, Y.Y. and Leng, C.T. and Keong, L.K. (2018) Issues and Current Trends of Hollow-Fiber Mixed-Matrix Membranes for CO2 Separation from N2 and CH4. Chemical Engineering and Technology, 41 (2). pp. 235-252.

Mubashir, M. and Yeong, Y.F. and Lau, K.K. and Chew, T.L. and Norwahyu, J. (2018) Efficient CO2/N2 and CO2/CH4 separation using NH2-MIL-53(Al)/cellulose acetate (CA) mixed matrix membranes. Separation and Purification Technology, 199. pp. 140-151.

Murugiah, P.S. and Oh, P.C. and Lau, K.K. (2018) The performance of PPOdm-CNF Mixed Matrix Membrane for CO2/CH4 separation. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5086-5096.

Mubashir, M. and Yeong, Y.F. and Lau, K.K. and Chew, T.L. and Norwahyu, J. (2018) Efficient CO2/N2 and CO2/CH4 separation using NH2-MIL-53(Al)/cellulose acetate (CA) mixed matrix membranes. Separation and Purification Technology, 199. pp. 140-151.

Masri, A.N. and Abdul Mutalib, M.I. and Aminuddin, N.F. and Lévêque, J.-M. (2018) Novel SO3H-functionalized dicationic ionic liquids � A comparative study for esterification reaction by ultrasound cavitation and mechanical stirring for biodiesel production. Separation and Purification Technology, 196. pp. 106-114.

Mubashir, Muhammad and Yeong, Yin Fong and Lau, Kok Keong and Chew, Thiam Leng and Norwahyu, Jusoh (2018) Efficient CO2/N2 and CO2/CH4 separation using NH2-MIL-53 (Al)/cellulose acetate (CA) mixed matrix membranes. Separation and Purification Technology, 199. pp. 140-151.

Mubashir, M and Yeong, YF and Chew, TL and Lau, KK (2018) Effect of Take-up Speed on the Fabrication of Cellulose Acetate Hollow Fibre Membrane in CO2 Separation from N2 and CH4. Journal of Applied Membrane Science & Technology, 22 (2).

Mubashir, Muhammad and Fong, Yeong Yin and Leng, Chew Thiam and Keong, Lau Kok (2018) Prediction of CO2 permeability in NH2-MIL-53 (Al)/cellulose acetate mixed matrix membranes using theoretical models. International Journal of Integrated Engineering, 10 (5).

Murugiah, Pannir Selvam and Oh, Pei Ching and Lau, Kok Keong (2018) Impregnation of carbonaceous nanofibers into glassy polymer-based composite membrane for CO2 separation. Chinese Journal of Chemical Engineering, 26 (11). pp. 2385-2390.

Mubashir, Muhammad and Fong, Yeong Yin and Leng, Chew Thiam and Keong, Lau Kok (2018) Issues and Current Trends of Hollow-Fiber Mixed-Matrix Membranes for CO2 Separation from N2 and CH4. Chemical Engineering & Technology, 41 (2). pp. 235-252.

Murugiah, PS and Oh, PC and Lau, KK (2018) Facilitated transport graphene oxide based PPOdm mixed matrix membrane for CO2 separation. Materials Today: Proceedings, 5 (10). pp. 21818-21824.

Murugiah, PS and Oh, PC and Lau, KK (2018) The performance of PPOdm-CNF Mixed Matrix Membrane for CO2/CH4 separation. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5086-5096.

Mubashir, M and Fong, YY and Leng, CT and Keong, LK (2018) Enhanced gases separation of cellulose acetate membrane using N-methyl-1-2 pyrrolidone as fabrication solvent. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 4978-4986.

Murugiah, Pannir Selvam and Oh, Pei Ching and Lau, Kok Keong (2018) Impregnation of carbonaceous nanofibers into glassy polymer-based composite membrane for CO2 separation. Chinese Journal of Chemical Engineering, 26 (11). pp. 2385-2390.

Murugiah, PS and Oh, PC and Lau, KK (2018) Facilitated transport graphene oxide based PPOdm mixed matrix membrane for CO2 separation. Materials Today: Proceedings, 5 (10). pp. 21818-21824.

Murugiah, PS and Oh, PC and Lau, KK (2018) The performance of PPOdm-CNF Mixed Matrix Membrane for CO2/CH4 separation. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5086-5096.

Moshikur, Rahman Md and Chowdhury, Md Raihan and Wakabayashi, Rie and Tahara, Yoshiro and Moniruzzaman, Muhammad and Goto, Masahiro (2018) Characterization and cytotoxicity evaluation of biocompatible amino acid esters used to convert salicylic acid into ionic liquids. International journal of pharmaceutics, 546 (1-2). pp. 31-38.

Mahmood, Hamayoun and Moniruzzaman, Muhammad and Yusup, Suzana and Akil, Hazizan Md (2018) Ionic liquid pretreatment at high solids loading: A clean approach for fabrication of renewable resource based particulate composites. Polymer Composites, 39 (6). pp. 1994-2003.

Moniruzzaman, Md and Mondal, Moni Sankar and Hossain, Md Nazmul (2018) The influence of mordant and mordanting techniques on ecofriendly dyeing of cotton fabric by extracted used tea. J. Eng. Sci, 9. pp. 111-117.

N

Nashed, Omar and Partoon, Behzad and Lal, Bhajan and Sabil, Khalik M and Shariff, Azmi Mohd (2018) Review the impact of nanoparticles on the thermodynamics and kinetics of gas hydrate formation. Journal of Natural Gas Science and Engineering, 55. pp. 452-465.

Nasir, Rizwan and Ahmad, Nor Naimah Rosyadah and Mukhtar, Hilmi and Mohshim, Dzeti Farhah (2018) Effect of ionic liquid inclusion and amino—functionalized SAPO-34 on the performance of mixed matrix membranes for CO2/CH4 separation. Journal of Environmental Chemical Engineering, 6 (2). pp. 2363-2368.

Nasir, Rizwan and Maqsood, Khuram and Gondal, Shahla and Mukhtar, Hilmi and Mohshim, Dzeti Farhah (2018) Barebones of Gas Transport through Membranes. NFC IEFR Journal of Engineering and Scientific Research, 5.

Nadeem, Saad and Mumtaz, Asad and Mumtaz, Mudassar and Mutalib, MI Abdul and Shaharun, Maizatul Shima and Abdullah, Bawadi (2018) Visible light driven CO2 reduction to methanol by Cu-porphyrin impregnated mesoporous Ti-MCM-48. Journal of Molecular Liquids, 272. pp. 656-667.

Nashed, Omar and Dadebayev, Didar and Khan, Muhammad Saad and Bavoh, Cornelius B and Lal, Bhajan and Shariff, Azmi Mohd (2018) Experimental and modelling studies on thermodynamic methane hydrate inhibition in the presence of ionic liquids. Journal of Molecular Liquids, 249. pp. 886-891.

Nasrullah, A. and Bhat, A.H. and Naeem, A. and Isa, M.H. and Danish, M. (2018) High surface area mesoporous activated carbon-alginate beads for efficient removal of methylene blue. International Journal of Biological Macromolecules, 107. pp. 1792-1799.

Nashed, O. and Sabil, K.M. and Ismail, L. and Japper-Jaafar, A. and Lal, B. (2018) Mean induction time and isothermal kinetic analysis of methane hydrate formation in water and imidazolium based ionic liquid solutions. Journal of Chemical Thermodynamics, 117. pp. 147-154.

Nia, E.M. and Zawawi, N.A.W.A. and Singh, B.S.M. (2018) A review of walking energy harvesting using piezoelectric materials. IOP Conference Series: Materials Science and Engineering, 291 (1).

Nedaei, M. and Ataei, A. and Adaramola, M.S. and Mirzahosseini, A.H. and Khalaji Assadi, M. and Assareh, E. (2018) Comparative analysis of three numerical methods for estimating the onshore wind power in a coastal area. International Journal of Ambient Energy, 39 (1). pp. 58-72.

Nashed, O. and Dadebayev, D. and Khan, M.S. and Bavoh, C.B. and Lal, B. and Shariff, A.M. (2018) Experimental and modelling studies on thermodynamic methane hydrate inhibition in the presence of ionic liquids. Journal of Molecular Liquids, 249. pp. 886-891.

Nazif, A. and Mohammed, N.I. and Malakahmad, A. and Abualqumboz, M.S. (2018) Regression and multivariate models for predicting particulate matter concentration level. Environmental Science and Pollution Research, 25 (1). pp. 283-289.

Nurika, O. and Hassan, M.F. and Zakaria, N. and Jung, L.T. (2018) A study of fluctuations and confidence of implementation in genetic algorithm optimized network in data centre. Intelligent Decision Technologies, 12 (1). pp. 25-37.

Nasir, A.M. and Md Nordin, N.A.H. and Goh, P.S. and Ismail, A.F. (2018) Application of two-dimensional leaf-shaped zeolitic imidazolate framework (2D ZIF-L) as arsenite adsorbent: Kinetic, isotherm and mechanism. Journal of Molecular Liquids, 250. pp. 269-277.

Nikbakht, E. and Al-Nini, A. and Dahi, S.M. and Mahzabin, S. (2018) Lateral behaviour of PT segmental bridge columns with Ultra High Strength Concrete (UHSC). IABSE Conference, Kuala Lumpur 2018: Engineering the Developing World - Report. pp. 732-735.

Noureen, S. and Noreen, S. and Ghumman, S.A. and Batool, F. and Arshad, M. and Noreen, F. and Ishtiaq, U. and Bukhari, S.N. (2018) Seeds of giant dodder (Cuscuta reflexa) as a function of extract procedure and solvent nature. Notulae Botanicae Horti Agrobotanici Cluj-Napoca, 46 (2). pp. 653-662.

Naqvi, S.R. and Jamshaid, S. and Naqvi, M. and Farooq, W. and Niazi, M.B.K. and Aman, Z. and Zubair, M. and Ali, M. and Shahbaz, M. and Inayat, A. and Afzal, W. (2018) Potential of biomass for bioenergy in Pakistan based on present case and future perspectives. Renewable and Sustainable Energy Reviews, 81. pp. 1247-1258.

Noh, Mohd Hilmi (2018) Fast-charging of Lithium Iron Phosphate battery with ohmic-drop compensation method: Ageing study. Journal of Power Sources, 16. pp. 21-36.

Nawi, N.I.M. and Bilad, M.R. and Nordin, N.A.H.M. (2018) Effect of dope solution temperature on the membrane structure and membrane distillation performance. IOP Conference Series: Earth and Environmental Science, 140 (1).

Narahari, M. (2018) Unsteady free convection flow past a semi-infinite vertical plate with constant heat flux in water based nanofluids. IOP Conference Series: Materials Science and Engineering, 342 (1).

Nizam, N.F.I.A. and Sallih, N. and Puspitasari, D. and Ginta, T.L. and Mustapha, M. (2018) The influence of substrate surface energy on the adhesion compatibility of epoxy adhesive using molecular simulation tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2786-2792.

Nasir, R. and Ahmad, N.N.R. and Mukhtar, H. and Mohshim, D.F. (2018) Effect of ionic liquid inclusion and amino-functionalized SAPO-34 on the performance of mixed matrix membranes for CO2/CH4 separation. Journal of Environmental Chemical Engineering, 6 (2). pp. 2363-2368.

Nazir, M.S. and Ajab, H. and Raza, M.R. and Abdullah, M.A. (2018) Surface modification of cellulose fibers from oil palm empty fruit bunches for heavy metal ion sorption and diesel desulphurization. Desalination and Water Treatment, 107. pp. 241-256.

Ngui, J.Q. and Hermana, M. and Ghosh, D.P. and Yusoff, W.I.W. (2018) Integrated study of lithofacies identification�a case study in X field, Sabah, Malaysia. Geosciences (Switzerland), 8 (2).

Nizam, N.F.I.A. and Sallih, N. and Puspitasari, D. and Ginta, T.L. and Mustapha, M. (2018) The influence of substrate surface energy on the adhesion compatibility of epoxy adhesive using molecular simulation tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2786-2792.

Nashed, O. and Partoon, B. and Lal, B. and Sabil, K.M. and Shariff, A.M. (2018) Review the impact of nanoparticles on the thermodynamics and kinetics of gas hydrate formation. Journal of Natural Gas Science and Engineering, 55. pp. 452-465.

Nashed, O. and Dadebayev, D. and Khan, M.S. and Bavoh, C.B. and Lal, B. and Shariff, A.M. (2018) Experimental and modelling studies on thermodynamic methane hydrate inhibition in the presence of ionic liquids. Journal of Molecular Liquids, 249. pp. 886-891.

Naqvi, S.R. and Tariq, R. and Hameed, Z. and Ali, I. and Taqvi, S.A. and Naqvi, M. and Niazi, M.B.K. and Noor, T. and Farooq, W. (2018) Pyrolysis of high-ash sewage sludge: Thermo-kinetic study using TGA and artificial neural networks. Fuel, 233. pp. 529-538.

Nashed, O. and Partoon, B. and Lal, B. and Sabil, K.M. and Shariff, A.M. (2018) Review the impact of nanoparticles on the thermodynamics and kinetics of gas hydrate formation. Journal of Natural Gas Science and Engineering, 55. pp. 452-465.

Naffouti, S.E. and Fougerolle, Y. and Aouissaoui, I. and Sakly, A. and Mériaudeau, F. (2018) Heuristic optimization-based wave kernel descriptor for deformable 3D shape matching and retrieval. Signal, Image and Video Processing, 12 (5). pp. 915-923.

Ng, Q.H. and Chin, B.L.F. and Yusup, S. and Loy, A.C.M. and Chong, K.Y.Y. (2018) Modeling of the co-pyrolysis of rubber residual and HDPE waste using the distributed activation energy model (DAEM). Applied Thermal Engineering, 138. pp. 336-345.

Nikbakht, E. and Rashid, K. (2018) Investigation on seismic performance and functionality of self-centring post-tensioned segmental columns. Structure and Infrastructure Engineering, 14 (6). pp. 730-742.

Noor, S.N.M. and Lim, J.W. and Lam, M.K. and Uemura, Y. and Chew, T.L. and Ho, Y.C. and Mohamad, M. (2018) Lipid and protein from black soldier fly larvae fed with self- fermented coconut waste medium. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 88-95.

Nazir, M.S. and Ajab, H. and Raza, M.R. and Abdullah, M.A. (2018) Surface modification of cellulose fibers from oil palm empty fruit bunches for heavy metal ion sorption and diesel desulphurization. Desalination and Water Treatment, 107. pp. 241-256.

Nashed, O. and Dadebayev, D. and Khan, M.S. and Bavoh, C.B. and Lal, B. and Shariff, A.M. (2018) Experimental and modelling studies on thermodynamic methane hydrate inhibition in the presence of ionic liquids. Journal of Molecular Liquids, 249. pp. 886-891.

Nazif, A. and Mohammed, N.I. and Malakahmad, A. and Abualqumboz, M.S. (2018) Regression and multivariate models for predicting particulate matter concentration level. Environmental Science and Pollution Research, 25 (1). pp. 283-289.

Nurika, O. and Hassan, M.F. and Zakaria, N. and Jung, L.T. (2018) A study of fluctuations and confidence of implementation in genetic algorithm optimized network in data centre. Intelligent Decision Technologies, 12 (1). pp. 25-37.

Nasir, A.M. and Md Nordin, N.A.H. and Goh, P.S. and Ismail, A.F. (2018) Application of two-dimensional leaf-shaped zeolitic imidazolate framework (2D ZIF-L) as arsenite adsorbent: Kinetic, isotherm and mechanism. Journal of Molecular Liquids, 250. pp. 269-277.

Noureen, S. and Noreen, S. and Ghumman, S.A. and Batool, F. and Arshad, M. and Noreen, F. and Ishtiaq, U. and Bukhari, S.N. (2018) Seeds of giant dodder (Cuscuta reflexa) as a function of extract procedure and solvent nature. Notulae Botanicae Horti Agrobotanici Cluj-Napoca, 46 (2). pp. 653-662.

Naqvi, S.R. and Jamshaid, S. and Naqvi, M. and Farooq, W. and Niazi, M.B.K. and Aman, Z. and Zubair, M. and Ali, M. and Shahbaz, M. and Inayat, A. and Afzal, W. (2018) Potential of biomass for bioenergy in Pakistan based on present case and future perspectives. Renewable and Sustainable Energy Reviews, 81. pp. 1247-1258.

Naqvi, S.R. and Tariq, R. and Hameed, Z. and Ali, I. and Taqvi, S.A. and Naqvi, M. and Niazi, M.B.K. and Noor, T. and Farooq, W. (2018) Pyrolysis of high-ash sewage sludge: Thermo-kinetic study using TGA and artificial neural networks. Fuel, 233. pp. 529-538.

Nashed, O. and Partoon, B. and Lal, B. and Sabil, K.M. and Shariff, A.M. (2018) Review the impact of nanoparticles on the thermodynamics and kinetics of gas hydrate formation. Journal of Natural Gas Science and Engineering, 55. pp. 452-465.

Naffouti, S.E. and Fougerolle, Y. and Aouissaoui, I. and Sakly, A. and Mériaudeau, F. (2018) Heuristic optimization-based wave kernel descriptor for deformable 3D shape matching and retrieval. Signal, Image and Video Processing, 12 (5). pp. 915-923.

Ng, Q.H. and Chin, B.L.F. and Yusup, S. and Loy, A.C.M. and Chong, K.Y.Y. (2018) Modeling of the co-pyrolysis of rubber residual and HDPE waste using the distributed activation energy model (DAEM). Applied Thermal Engineering, 138. pp. 336-345.

Nikbakht, E. and Rashid, K. (2018) Investigation on seismic performance and functionality of self-centring post-tensioned segmental columns. Structure and Infrastructure Engineering, 14 (6). pp. 730-742.

Noor, S.N.M. and Lim, J.W. and Lam, M.K. and Uemura, Y. and Chew, T.L. and Ho, Y.C. and Mohamad, M. (2018) Lipid and protein from black soldier fly larvae fed with self- fermented coconut waste medium. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 88-95.

Nashed, O. and Partoon, B. and Lal, B. and Sabil, K.M. and Shariff, A.M. (2018) Review the impact of nanoparticles on the thermodynamics and kinetics of gas hydrate formation. Journal of Natural Gas Science and Engineering, 55. pp. 452-465.

Nashed, O. and Sabil, K.M. and Ismail, L. and Japper-Jaafar, A. and Lal, B. (2018) Mean induction time and isothermal kinetic analysis of methane hydrate formation in water and imidazolium based ionic liquid solutions. Journal of Chemical Thermodynamics, 117. pp. 147-154.

Nashed, O. and Dadebayev, D. and Khan, M.S. and Bavoh, C.B. and Lal, B. and Shariff, A.M. (2018) Experimental and modelling studies on thermodynamic methane hydrate inhibition in the presence of ionic liquids. Journal of Molecular Liquids, 249. pp. 886-891.

O

Opatola, Rasheed Adewale and A. Aziz, A Rashid and Heikal, Morgan R and Meor Said, Mior Azman (2018) Dual Fuel (Gas--Liquid Diesel). Alternative Fuels for Compression Ignition Engines. pp. 1-21.

Othman, I. and Shafiq, N. and Nuruddin, M.F. (2018) Time Overrun in Construction Project. IOP Conference Series: Materials Science and Engineering, 291 (1).

Othman, I. and Shafiq, N. and Nuruddin, M.F. (2018) Quality planning in Construction Project. IOP Conference Series: Materials Science and Engineering, 291 (1).

Othman, I. and Shafiq, N. and Nuruddin, M.F. (2018) Effective Safety Management in Construction Project. IOP Conference Series: Materials Science and Engineering, 291 (1).

Osman, A.B. and Ovinis, M. and Faye, I. and Hashim, F.M. and Osei, H. (2018) An optical flow measurement technique based on continuous wavelet transform. Journal of Applied Fluid Mechanics, 11 (3). pp. 695-707.

Osman, A.B. and Ovinis, M. and Faye, I. and Hashim, F.M. (2018) Image-Based Technique for Turbulent Flow Segmentation. Lecture Notes in Electrical Engineering, 488. pp. 119-129.

Othman, A.R. and Hassan, M.H. and Abu Bakar, E. and Othman, W.A.F.W. (2018) Statistical analysis of the machining parameters in drilling of carbon fibre reinforced plastics (CFRP) composite with various drill types. Lecture Notes in Mechanical Engineering (978981). pp. 141-154.

Osman, A. and Mohd Razali, R. and Nurdin, N. (2018) Powertrain Warm-Up Optimization Involving Simplified Split Cooling with Integrated Exhaust Heat Recovery and Reuse. SAE Technical Papers, 2018-A.

Omar, N. and Al-Tashi, Q. (2018) Arabic nested noun compound extraction based on linguistic features and statistical measures. GEMA Online Journal of Language Studies, 18 (2). pp. 93-107.

Oumer, A.N. and Hasan, M.M. and Baheta, A.T. and Mamat, R. and Abdullah, A.A. (2018) Bio-based liquid fuels as a source of renewable energy: A review. Renewable and Sustainable Energy Reviews, 88. pp. 82-98.

Okitsu, J. and Matsuo, T. and Yamamoto, H. and Zabiri, H.B. and Tufa, L.D. and Ramasamy, M. (2018) Cause analysis of representative troubles at distillation tower using discriminant analysis. IEEE International Conference on Industrial Engineering and Engineering Management, 2017-D. pp. 1901-1905.

Okitsu, J. and Matsuo, T. and Yamamoto, H. and Zabiri, H.B. and Tufa, L.D. and Ramasamy, M. (2018) Cause analysis of representative troubles at distillation tower using discriminant analysis. IEEE International Conference on Industrial Engineering and Engineering Management, 2017-D. pp. 1901-1905.

Oh, W.-D. and Lisak, G. and Webster, R.D. and Liang, Y.-N. and Veksha, A. and Giannis, A. and Moo, J.G.S. and Lim, J.-W. and Lim, T.-T. (2018) Insights into the thermolytic transformation of lignocellulosic biomass waste to redox-active carbocatalyst: Durability of surface active sites. Applied Catalysis B: Environmental, 233. pp. 120-129.

Ong, C.C. and Gopinath, S.C.B. and Rebecca, L.W.X. and Perumal, V. and Lakshmipriya, T. and Saheed, M.S.M. (2018) Diagnosing human blood clotting deficiency. International Journal of Biological Macromolecules, 116. pp. 765-773.

Ooi, J.-O. and Hussin, F.A. and Zakaria, M.N. (2018) Fine-grained overhead characterisation of cross-ISA DBTO for multicore processor. Indonesian Journal of Electrical Engineering and Computer Science, 10 (3). pp. 1036-1044.

Omar, N. and Al-Tashi, Q. (2018) Arabic nested noun compound extraction based on linguistic features and statistical measures. GEMA Online Journal of Language Studies, 18 (2). pp. 93-107.

Oumer, A.N. and Hasan, M.M. and Baheta, A.T. and Mamat, R. and Abdullah, A.A. (2018) Bio-based liquid fuels as a source of renewable energy: A review. Renewable and Sustainable Energy Reviews, 88. pp. 82-98.

Osman, A.B. and Ovinis, M. and Faye, I. and Hashim, F.M. and Osei, H. (2018) An optical flow measurement technique based on continuous wavelet transform. Journal of Applied Fluid Mechanics, 11 (3). pp. 695-707.

Osman, A.B. and Ovinis, M. and Faye, I. and Hashim, F.M. (2018) Image-Based Technique for Turbulent Flow Segmentation. Lecture Notes in Electrical Engineering, 488. pp. 119-129.

Othman, A.R. and Hassan, M.H. and Abu Bakar, E. and Othman, W.A.F.W. (2018) Statistical analysis of the machining parameters in drilling of carbon fibre reinforced plastics (CFRP) composite with various drill types. Lecture Notes in Mechanical Engineering (978981). pp. 141-154.

Osman, A. and Mohd Razali, R. and Nurdin, N. (2018) Powertrain Warm-Up Optimization Involving Simplified Split Cooling with Integrated Exhaust Heat Recovery and Reuse. SAE Technical Papers, 2018-A.

Oh, W.-D. and Lisak, G. and Webster, R.D. and Liang, Y.-N. and Veksha, A. and Giannis, A. and Moo, J.G.S. and Lim, J.-W. and Lim, T.-T. (2018) Insights into the thermolytic transformation of lignocellulosic biomass waste to redox-active carbocatalyst: Durability of surface active sites. Applied Catalysis B: Environmental, 233. pp. 120-129.

Ong, C.C. and Gopinath, S.C.B. and Rebecca, L.W.X. and Perumal, V. and Lakshmipriya, T. and Saheed, M.S.M. (2018) Diagnosing human blood clotting deficiency. International Journal of Biological Macromolecules, 116. pp. 765-773.

Ooi, J.-O. and Hussin, F.A. and Zakaria, M.N. (2018) Fine-grained overhead characterisation of cross-ISA DBTO for multicore processor. Indonesian Journal of Electrical Engineering and Computer Science, 10 (3). pp. 1036-1044.

P

Pham, Loi Hoang Huy Phuoc and Rusli, Risza and Laziz, Afiq Mohd (2018) Numerical Analysis of Initial CO2 Bubbles Leaked in Seawater from Ocean CO2 Storage using Volume of Fluid Method. International Journal of Automotive and Mechanical Engineering, 15 (2). p. 5389.

Partoon, Behzad and Sabil, Khalik M and Lau, Kok Keong and Lal, Bhajan and Nasrifar, Khashayar (2018) Production of gas hydrate in a semi-batch spray reactor process as a means for separation of carbon dioxide from methane. Chemical Engineering Research and Design, 138. pp. 168-175.

Puspitasari, P. and Fauzan, R. and Ginta, T.L. and Mustapha, M. and Puspitasari, D. (2018) Morphology of aluminium with nickel addition on sand casting process. Journal of Achievements in Materials and Manufacturing Engineering, 87 (1). pp. 13-17.

Pan, J.-S. and Tsai, P.-W. and Watada, J. and Jain, L.C. (2018) Preface. Smart Innovation, Systems and Technologies, 81. v-vi.

Pan, J.-S. and Tsai, P.-W. and Watada, J. and Jain, L.C. (2018) Preface. Smart Innovation, Systems and Technologies, 82. v-vi.

Perdomo, O. and Otalora, S. and Gonzalez, F.A. and Meriaudeau, F. and Muller, H. (2018) OCT-NET: A convolutional network for automatic classification of normal and diabetic macular edema using sd-oct volumes. Proceedings - International Symposium on Biomedical Imaging, 2018-A. pp. 1423-1426.

Putra, N.R. and Idham, Z.B. and Machmudah, S. and Ruslan, M.S.H.B. and Che Yunus, M.A. (2018) Extraction of peanut skin oil by modified supercritical carbon dioxide: Empirical modelling and optimization. Separation Science and Technology (Philadelphia). pp. 1-9.

Pratama, E. and Ismail, M.S. and Ridha, S. (2018) Identification of coal seams suitability for carbon dioxide sequestration with enhanced coalbed methane recovery: a case study in South Sumatera Basin, Indonesia. Clean Technologies and Environmental Policy, 20 (3). pp. 581-587.

Putra, N.R. and Yunus, M.A.C. and Ruslan, M.S.H. and Idham, Z. and Idrus, F.N. (2018) Comparison extraction of peanut skin between CO2 supercritical fluid extraction and soxhlet extraction in term of oil yield and catechin. Pertanika Journal of Science and Technology, 26 (2). pp. 799-810.

Paputungan, I.V. and Hani, A.F.M. and Hassan, M.F. and Asirvadam, V.S. (2018) Real-Time and Proactive SLA Renegotiation for a Cloud-Based System. IEEE Systems Journal.

Pao, W. and Sam, B. and Saieed, A. and Tran, C.M. (2018) Numerical Investigation of Liquid Carryover in T-Junction with Different Diameter Ratios. IOP Conference Series: Materials Science and Engineering, 328 (1).

Permanasari, A.E. and Rambli, D.R.A. and Dominic, P.D.D. (2018) User interface design for a zoonosis prediction system. Journal of Engineering Science and Technology, 13 (2). pp. 347-360.

Puspitasari, D. and Ginta, T.L. and Mustapha, M. and Sallih, N. and Puspitasari, P. (2018) Statistical optimization of stress relieving parameters on closed cell aluminium foam using central composite design. Archives of Materials Science and Engineering, 89 (2). pp. 55-63.

Putra, N.R. and Idham, Z.B. and Machmudah, S. and Ruslan, M.S.H.B. and Che Yunus, M.A. (2018) Extraction of peanut skin oil by modified supercritical carbon dioxide: Empirical modelling and optimization. Separation Science and Technology (Philadelphia). pp. 1-9.

Putra, N.R. and Yunus, M.A.C. and Ruslan, M.S.H. and Idham, Z. and Idrus, F.N. (2018) Comparison extraction of peanut skin between CO2 supercritical fluid extraction and soxhlet extraction in term of oil yield and catechin. Pertanika Journal of Science and Technology, 26 (2). pp. 799-810.

Puspitasari, D. and Ginta, T.L. and Mustapha, M. and Sallih, N. and Puspitasari, P. (2018) Statistical optimization of stress relieving parameters on closed cell aluminium foam using central composite design. Archives of Materials Science and Engineering, 89 (2). pp. 55-63.

Puspitasari, P. and Fauzan, R. and Ginta, T.L. and Mustapha, M. and Puspitasari, D. (2018) Morphology of aluminium with nickel addition on sand casting process. Journal of Achievements in Materials and Manufacturing Engineering, 87 (1). pp. 13-17.

Pao, W. and Sam, B. and Saieed, A. and Tran, C.M. (2018) Numerical Investigation of Liquid Carryover in T-Junction with Different Diameter Ratios. IOP Conference Series: Materials Science and Engineering, 328 (1).

Perumal, V. and Saheed, M.S.M. and Mohamed, N.M. and Saheed, M.S.M. and Murthe, S.S. and Gopinath, S.C.B. and Chiu, J.-M. (2018) Gold nanorod embedded novel 3D graphene nanocomposite for selective bio-capture in rapid detection of Mycobacterium tuberculosis. Biosensors and Bioelectronics, 116. pp. 116-122.

Putra, N.R. and Idham, Z.B. and Machmudah, S. and Ruslan, M.S.H.B. and Che Yunus, M.A. (2018) Extraction of peanut skin oil by modified supercritical carbon dioxide: Empirical modelling and optimization. Separation Science and Technology (Philadelphia). pp. 1-9.

Puspitasari, P. and Fauzan, R. and Ginta, T.L. and Mustapha, M. and Puspitasari, D. (2018) Morphology of aluminium with nickel addition on sand casting process. Journal of Achievements in Materials and Manufacturing Engineering, 87 (1). pp. 13-17.

Pan, J.-S. and Tsai, P.-W. and Watada, J. and Jain, L.C. (2018) Preface. Smart Innovation, Systems and Technologies, 81. v-vi.

Pan, J.-S. and Tsai, P.-W. and Watada, J. and Jain, L.C. (2018) Preface. Smart Innovation, Systems and Technologies, 82. v-vi.

Perumal, V. and Saheed, M.S.M. and Mohamed, N.M. and Saheed, M.S.M. and Murthe, S.S. and Gopinath, S.C.B. and Chiu, J.-M. (2018) Gold nanorod embedded novel 3D graphene nanocomposite for selective bio-capture in rapid detection of Mycobacterium tuberculosis. Biosensors and Bioelectronics, 116. pp. 116-122.

Partoon, Behzad and Sabil, Khalik M and Lau, Kok Keong and Lal, Bhajan and Nasrifar, Khashayar (2018) Production of gas hydrate in a semi-batch spray reactor process as a means for separation of carbon dioxide from methane. Chemical Engineering Research and Design, 138. pp. 168-175.

Q

Qayyum, A. and Malik, A.S. and Shuaibu, A.N. and Nasir, N. (2018) Estimation of non-contact smartphone video-based vital sign monitoring using filtering and standard color conversion techniques. 2017 IEEE Life Sciences Conference, LSC 2017, 2018-J. pp. 202-205.

Qayyum, A. and Saad, N.M. and Kamel, N. and Malik, A.S. (2018) Deep convolutional neural network processing of aerial stereo imagery to monitor vulnerable zones near power lines. Journal of Applied Remote Sensing, 12 (1).

Qadrouh, A.N. and Carcione, J.M. and Ba, J. and Gei, D. and Salim, A.M. (2018) Backus and Wyllie Averages for Seismic Attenuation. Pure and Applied Geophysics, 175 (1). pp. 165-170.

Qadar Chaudhary, G. and Ali, M. and Sheikh, N.A. and Gilani, S.I.U.H. and Khushnood, S. (2018) Integration of solar assisted solid desiccant cooling system with efficient evaporative cooling technique for separate load handling. Applied Thermal Engineering, 140. pp. 696-706.

Qi, C.L. and Wee, S.C. and Maulianda, B. and Barati, R. and Zafri bin Bahruddin, A. and Padmanabhan, E. (2018) Determination of solvation free energy of carbon dioxide (CO2) in the mixture of brine, Alfa Olefin Sulfonate (AOS) and CH4 after foam fracturing in the shale reservoirs on enhanced shale gas recovery (ESGR). Journal of Natural Gas Science and Engineering, 54. pp. 102-109.

Qayyum, A. and Saad, N.M. and Kamel, N. and Malik, A.S. (2018) Deep convolutional neural network processing of aerial stereo imagery to monitor vulnerable zones near power lines. Journal of Applied Remote Sensing, 12 (1).

Qadrouh, A.N. and Carcione, J.M. and Ba, J. and Gei, D. and Salim, A.M. (2018) Backus and Wyllie Averages for Seismic Attenuation. Pure and Applied Geophysics, 175 (1). pp. 165-170.

Qadar Chaudhary, G. and Ali, M. and Sheikh, N.A. and Gilani, S.I.U.H. and Khushnood, S. (2018) Integration of solar assisted solid desiccant cooling system with efficient evaporative cooling technique for separate load handling. Applied Thermal Engineering, 140. pp. 696-706.

Qi, C.L. and Wee, S.C. and Maulianda, B. and Barati, R. and Zafri bin Bahruddin, A. and Padmanabhan, E. (2018) Determination of solvation free energy of carbon dioxide (CO2) in the mixture of brine, Alfa Olefin Sulfonate (AOS) and CH4 after foam fracturing in the shale reservoirs on enhanced shale gas recovery (ESGR). Journal of Natural Gas Science and Engineering, 54. pp. 102-109.

R

Ramli, Nasser Mohamed and Zabiri, Haslinda (2018) Dynamic Simulation for Distillation Column. Advances In Natural And Applied Sciences, 12 (4). pp. 6-10.

Ramkumar, M. and Santosh, M. and Nagarajan, R. and Li, S.S. and Mathew, M. and Menier, D. and Siddiqui, N. and Rai, J. and Sharma, A. and Farroqui, S. and Poppelreiter, M.C. and Lai, J. and Prasad, V. (2018) Late Middle Miocene volcanism in Northwest Borneo, Southeast Asia: Implications for tectonics, paleoclimate and stratigraphic marker. Palaeogeography, Palaeoclimatology, Palaeoecology, 490. pp. 141-162.

Ridha, S. and Abd Hamid, A.I. and Che Ku Mazuan, C.K.A.H. (2018) Influence of different brine water salinity on mechanical properties of fly ash-based geopolymer cement. International Journal of Structural Integrity, 9 (2). pp. 142-152.

Renganathan, S. and Kral, I. (2018) Comparative analysis of language and education policies for indigenous minorities in Australia and Malaysia. International Journal of Multicultural Education, 20 (1). pp. 1-19.

Riahi, A. and Wan Yusof, K. and Isa, M.H. and Singh Mahinder Singh, B. and Mustaffa, Z. and Ahsan, A. and Ul Mustafa, M.R. and Sapari, N. and Zahari, N.A.M. (2018) Potable water production using two solar stills having different cover materials and fabrication costs. Environmental Progress and Sustainable Energy, 37 (1). pp. 584-596.

Rahman, N.A.A. and Mohammad, M.F. and Rahim, S.A. and Hassan, R. and Ahmad, M.F. and Kadir, S.A. (2018) Shipper's perceptions of aviation Logistics Service Quality (LSQ) of air freight provider. Journal of Engineering and Applied Sciences, 13 (1). pp. 1-6.

Radzi, S.S.M. and Asirvadam, V.S. and Hutapea, D.K.Y. and Dass, S.C. (2018) Comparison of EEG signals during alert and sleep inertia states using fractal dimension. Proceedings - 2018 IEEE 14th International Colloquium on Signal Processing and its Application, CSPA 2018. pp. 155-160.

Ramanathan, S. and Gopinath, S.C.B. and Anbu, P. and Lakshmipriya, T. and Kasim, F.H. and Lee, C.-G. (2018) Eco-friendly synthesis of Solanum trilobatum extract-capped silver nanoparticles is compatible with good antimicrobial activities. Journal of Molecular Structure, 1160. pp. 80-91.

Rashidi, N.A. and Yusup, S. (2018) Production of palm kernel shell-based activated carbon by direct physical activation for carbon dioxide adsorption. Environmental Science and Pollution Research. pp. 1-15.

Raj, J.J. and Magaret, S. and Pranesh, M. and Lethesh, K.C. and Devi, W.C. and Mutalib, M.I.A. (2018) Extractive desulfurization of model fuel oil using ester functionalized imidazolium ionic liquids. Separation and Purification Technology, 196. pp. 115-123.

Raja Shahrom, M.S. and Wilfred, C.D. and Chong, F.K. (2018) Thermodynamic and kinetic studies on CO2 capture with PolyVBTMAArg. Journal of Physics and Chemistry of Solids, 116. pp. 22-29.

Razak, M.A. and Rani, A.M.A. and Saad, N.M. and Littlefair, G. and Aliyu, A.A. (2018) Controlling corrosion rate of Magnesium alloy using powder mixed electrical discharge machining. IOP Conference Series: Materials Science and Engineering, 344 (1).

Ridha, S. and Abd Hamid, A.I. and Abdul Halim, A.H. and Zamzuri, N.A. (2018) Elasticity and expansion test performance of geopolymer as oil well cement. IOP Conference Series: Earth and Environmental Science, 140 (1).

Ridha, S. and Setiawan, R.A. and Hamid, A.I.A. and Shahari, A.R. (2018) The influence of CO2 accelerated carbonation on alkali-activated fly ash cement under elevated temperature and pressure: Einfluss von CO2 beschleunigter Karbonisierung auf alkalisch aktivierten Flugaschezement unter erhöhter Temperatur und erhöhtem Druck. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 483-488.

Rashid, Z. and Wilfred, C.D. and Gnanasundaram, N. and Arunagiri, A. and Murugesan, T. (2018) Screening of ionic liquids as green oilfield solvents for the potential removal of asphaltene from simulated oil: COSMO-RS model approach. Journal of Molecular Liquids, 255. pp. 492-503.

Rudini and Matori, A.N. and Ab Talib, J. and Balogun, A.-L. (2018) Application of Geographic Information System (GIS) to Model the Hydrocarbon Migration: Case Study from North-East Malay Basin, Malaysia. E3S Web of Conferences, 34.

Ramli, A.S. and Basrawi, F. and Ibrahim, T.K. and Yusof, M.H.B. and Oumer, A.N. and Johari, N.A. and Muhamad, A. and Mamat, M.R. and Habib, K. (2018) Experimental analysis on a novel low-temperature vacuum drying with induced nucleation technique for dewatering stingless bees honey. Drying Technology. pp. 1-7.

Ruslan, M.S.H. and Idham, Z. and Nian Yian, L. and Ahmad Zaini, M.A. and Che Yunus, M.A. (2018) Effect of operating conditions on catechin extraction from betel nuts using supercritical CO2-methanol extraction. Separation Science and Technology (Philadelphia), 53 (4). pp. 662-670.

Rashid, Sr. and Kueh, A.B.H. and Mohamad, H. (2018) Behaviour of soft soil improved by floating soil-cement columns. International Journal of Physical Modelling in Geotechnics, 18 (2). pp. 95-116.

Razip, H. and Zakaria, M.N. (2018) Combining approximation algorithm with genetic algorithm at the initial population for NP-complete problem. IEEE Student Conference on Research and Development: Inspiring Technology for Humanity, SCOReD 2017 - Proceedings, 2018-J. pp. 98-103.

Rasheed, W. and Bhatti, M.S. and Hisham Bin Hamid, N. and Tang, T.B. and Idris, Z. (2018) Moderate traumatic brain injury identification for MEG data using PU (Positive and Unseen) learning. Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics, 2017-O. pp. 25-28.

Ruslan, M.S.H. and Idham, Z. and Nian Yian, L. and Ahmad Zaini, M.A. and Che Yunus, M.A. (2018) Effect of operating conditions on catechin extraction from betel nuts using supercritical CO2-methanol extraction. Separation Science and Technology (Philadelphia), 53 (4). pp. 662-670.

Rozi, F. and Mohebbi, H. and Ismail, M.C. and Kakooei, S. and Ahmadi, M. and Aghasadeghi, A. and Aghasadeghi, A. (2018) Laboratory investigation on the condensation and corrosion rates of top of line corrosion in carbon steel: a case study from pipeline transporting wet gas in elevated temperature. Corrosion Engineering Science and Technology. pp. 1-5.

Rezk, M.G. and Foroozesh, J. (2018) Determination of mass transfer parameters and swelling factor of CO2-oil systems at high pressures. International Journal of Heat and Mass Transfer, 126. pp. 380-390.

Rozi, F. and Mohebbi, H. and Ismail, M.C. and Kakooei, S. and Ahmadi, M. and Aghasadeghi, A. and Aghasadeghi, A. (2018) Laboratory investigation on the condensation and corrosion rates of top of line corrosion in carbon steel: a case study from pipeline transporting wet gas in elevated temperature. Corrosion Engineering Science and Technology. pp. 1-5.

Rahim, N.F. and Othman, M. and Sokkalingam, R. and Abdul Kadir, E. (2018) Forecasting Crude Palm Oil Prices Using Fuzzy Rule-Based Time Series Method. IEEE Access, 6. pp. 32216-32224.

Ramli, N.H. and Yusup, S. and Kueh, B.W.B. and Kamarulzaman, P.S.D. and Osman, N. and Abd. Rahim, M. and Aziz, R. and Mokhtar, S. and Ahmad, A.B. (2018) Effectiveness of biopesticides against brown planthopper (Nilaparvata lugens) in paddy cultivation. Sustainable Chemistry and Pharmacy, 8. pp. 16-20.

Rashid, T. and Gnanasundaram, N. and Appusamy, A. and Kait, C.F. and Thanabalan, M. (2018) Enhanced lignin extraction from different species of oil palm biomass: Kinetics and optimization of extraction conditions. Industrial Crops and Products, 116. pp. 122-136.

Ramanathan, S. and Gopinath, S.C.B. and Anbu, P. and Lakshmipriya, T. and Kasim, F.H. and Lee, C.-G. (2018) Eco-friendly synthesis of Solanum trilobatum extract-capped silver nanoparticles is compatible with good antimicrobial activities. Journal of Molecular Structure, 1160. pp. 80-91.

Rashidi, N.A. and Yusup, S. (2018) Production of palm kernel shell-based activated carbon by direct physical activation for carbon dioxide adsorption. Environmental Science and Pollution Research. pp. 1-15.

Raj, J.J. and Magaret, S. and Pranesh, M. and Lethesh, K.C. and Devi, W.C. and Mutalib, M.I.A. (2018) Extractive desulfurization of model fuel oil using ester functionalized imidazolium ionic liquids. Separation and Purification Technology, 196. pp. 115-123.

Raja Shahrom, M.S. and Wilfred, C.D. and Chong, F.K. (2018) Thermodynamic and kinetic studies on CO2 capture with PolyVBTMAArg. Journal of Physics and Chemistry of Solids, 116. pp. 22-29.

Ramli, A.S. and Basrawi, F. and Ibrahim, T.K. and Yusof, M.H.B. and Oumer, A.N. and Johari, N.A. and Muhamad, A. and Mamat, M.R. and Habib, K. (2018) Experimental analysis on a novel low-temperature vacuum drying with induced nucleation technique for dewatering stingless bees honey. Drying Technology. pp. 1-7.

Ridha, S. and Abd Hamid, A.I. and Che Ku Mazuan, C.K.A.H. (2018) Influence of different brine water salinity on mechanical properties of fly ash-based geopolymer cement. International Journal of Structural Integrity, 9 (2). pp. 142-152.

Renganathan, S. and Kral, I. (2018) Comparative analysis of language and education policies for indigenous minorities in Australia and Malaysia. International Journal of Multicultural Education, 20 (1). pp. 1-19.

Riahi, A. and Wan Yusof, K. and Isa, M.H. and Singh Mahinder Singh, B. and Mustaffa, Z. and Ahsan, A. and Ul Mustafa, M.R. and Sapari, N. and Zahari, N.A.M. (2018) Potable water production using two solar stills having different cover materials and fabrication costs. Environmental Progress and Sustainable Energy, 37 (1). pp. 584-596.

Rahman, N.A.A. and Mohammad, M.F. and Rahim, S.A. and Hassan, R. and Ahmad, M.F. and Kadir, S.A. (2018) Shipper's perceptions of aviation Logistics Service Quality (LSQ) of air freight provider. Journal of Engineering and Applied Sciences, 13 (1). pp. 1-6.

Rezk, M.G. and Foroozesh, J. (2018) Determination of mass transfer parameters and swelling factor of CO2-oil systems at high pressures. International Journal of Heat and Mass Transfer, 126. pp. 380-390.

Rozi, F. and Mohebbi, H. and Ismail, M.C. and Kakooei, S. and Ahmadi, M. and Aghasadeghi, A. and Aghasadeghi, A. (2018) Laboratory investigation on the condensation and corrosion rates of top of line corrosion in carbon steel: a case study from pipeline transporting wet gas in elevated temperature. Corrosion Engineering Science and Technology. pp. 1-5.

Rahim, N.F. and Othman, M. and Sokkalingam, R. and Abdul Kadir, E. (2018) Forecasting Crude Palm Oil Prices Using Fuzzy Rule-Based Time Series Method. IEEE Access, 6. pp. 32216-32224.

Ramli, N.H. and Yusup, S. and Kueh, B.W.B. and Kamarulzaman, P.S.D. and Osman, N. and Abd. Rahim, M. and Aziz, R. and Mokhtar, S. and Ahmad, A.B. (2018) Effectiveness of biopesticides against brown planthopper (Nilaparvata lugens) in paddy cultivation. Sustainable Chemistry and Pharmacy, 8. pp. 16-20.

Rashid, T. and Gnanasundaram, N. and Appusamy, A. and Kait, C.F. and Thanabalan, M. (2018) Enhanced lignin extraction from different species of oil palm biomass: Kinetics and optimization of extraction conditions. Industrial Crops and Products, 116. pp. 122-136.

Raja Shahrom, M.S. and Wilfred, C.D. and Chong, F.K. (2018) Thermodynamic and kinetic studies on CO2 capture with PolyVBTMAArg. Journal of Physics and Chemistry of Solids, 116. pp. 22-29.

Rashid, Z. and Wilfred, C.D. and Gnanasundaram, N. and Arunagiri, A. and Murugesan, T. (2018) Screening of ionic liquids as green oilfield solvents for the potential removal of asphaltene from simulated oil: COSMO-RS model approach. Journal of Molecular Liquids, 255. pp. 492-503.

Rashid, Z. and Wilfred, C.D. and Gnanasundaram, N. and Arunagiri, A. and Murugesan, T. (2018) Screening of ionic liquids as green oilfield solvents for the potential removal of asphaltene from simulated oil: COSMO-RS model approach. Journal of Molecular Liquids, 255. pp. 492-503.

Raja Shahrom, M.S. and Wilfred, C.D. and Chong, F.K. (2018) Thermodynamic and kinetic studies on CO2 capture with PolyVBTMAArg. Journal of Physics and Chemistry of Solids, 116. pp. 22-29.

Rashid, T. and Gnanasundaram, N. and Appusamy, A. and Kait, C.F. and Thanabalan, M. (2018) Enhanced lignin extraction from different species of oil palm biomass: Kinetics and optimization of extraction conditions. Industrial Crops and Products, 116. pp. 122-136.

Rashid, Z. and Wilfred, C.D. and Gnanasundaram, N. and Arunagiri, A. and Murugesan, T. (2018) Screening of ionic liquids as green oilfield solvents for the potential removal of asphaltene from simulated oil: COSMO-RS model approach. Journal of Molecular Liquids, 255. pp. 492-503.

S

Salvinder, KMS and Zabiri, H and Isa, F and Taqvi, SA and Roslan, MAH and Shariff, Azmi M (2018) Dynamic modelling, simulation and basic control of CO2 absorption based on high pressure pilot plant for natural gas treatment. International Journal of Greenhouse Gas Control, 70. pp. 164-177.

Singh, Sharanjit and Bahari, Mahadi B and Abdullah, Bawadi and Phuong, Pham TT and Truong, Quang Duc and Vo, Dai-Viet N and Adesina, Adesoji A (2018) Bi-reforming of methane on Ni/SBA-15 catalyst for syngas production: Influence of feed composition. International Journal of Hydrogen Energy, 43 (36). pp. 17230-17243.

Samat, Nur Amalina Shairah Abdul and Zabiri, Haslinda and Kamaruddin, Bashariah (2018) The development and investigation analysis of an arx-based generalized likelihood ratio (GLR) stiction detection method. Jurnal Teknologi, 80 (4).

Salvinder, KMS and Zabiri, H and Isa, F and Taqvi, SA and Roslan, MAH and Shariff, Azmi M (2018) Dynamic modelling, simulation and basic control of CO2 absorption based on high pressure pilot plant for natural gas treatment. International Journal of Greenhouse Gas Control, 70. pp. 164-177.

Samsudin, Mohamad Fakhrul Ridhwan and Sufian, Suriati and others (2018) The Reaction Mechanism Of Ammonia Production via Magnetic Induction Method: A Density Functional Theory (DFT) Study. Platform: A Journal of Science and Technology, 1 (1). pp. 24-30.

Samsudin, Mohamad Fakhrul Ridhwan and Sufian, Suriati and Hameed, BH (2018) Epigrammatic progress and perspective on the photocatalytic properties of BiVO4-based photocatalyst in photocatalytic water treatment technology: A review. Journal of Molecular Liquids, 268. pp. 438-459.

Salam, M Abdus and Ahmed, Kawsar and Akter, Nazma and Hossain, Tareq and Abdullah, Bawadi (2018) A review of hydrogen production via biomass gasification and its prospect in Bangladesh. International journal of hydrogen energy, 43 (32). pp. 14944-14973.

Sikander, Umair and Sufian, Suriati and KuShaari, K and Chong, Fai Kait (2018) Effects of catalytic bed position on hydrogen production by methane decomposition. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3313-3320.

Samsudin, Mohamad Fakhrul Ridhwan and Sufian, Suriati and Mohamed, Norani Muti and Bashiri, Robabeh and Wolfe, Frederick and Ramli, Raihan Mahirah (2018) Enhancement of hydrogen production over screen-printed TiO2/BiVO4 thin film in the photoelectrochemical cells. Materials Letters, 211. pp. 13-16.

Samsudin, Mohamad Fakhrul Ridhwan and Sufian, Suriati and Bashiri, Robabeh and Mohamed, Norani Muti and Siang, Lim Tau and Ramli, Raihan Mahirah (2018) Optimization of photodegradation of methylene blue over modified TiO2/BiVO4 photocatalysts: effects of total TiO2 loading and different type of co-catalyst. Materials Today: Proceedings, 5 (10). pp. 21710-21717.

Samsudin, Mohamad Fakhrul Ridhwan and Siang, Lim Tau and Sufian, Suriati and Bashiri, Robabeh and Mohamed, Norani Muti and Ramli, Raihan Mahirah (2018) Exploring the role of electron-hole scavengers on optimizing the photocatalytic performance of BiVO4. Materials Today: Proceedings, 5 (10). pp. 21703-21709.

Samsudin, Mohamad Fakhrul Ridhwan and Mahmood, Asem and Sufian, Suriati (2018) Enhanced photocatalytic degradation of wastewater over RGO-TiO2/BiVO4 photocatalyst under solar light irradiation. Journal of Molecular Liquids, 268. pp. 26-36.

Shokrollahi, F and Lau, KK and Tay, WH and Lai, LS (2018) Power measurement by calorimetric method using water infrequency range between 1.7 Mhz to 3 Mhz. Int J Eng Technol, 7. pp. 106-109.

Suleman, Malik Shoaib and Lau, KK and Yeong, YF (2018) Development, characterization and performance evaluation of a swelling resistant membrane for CO2/CH4 separation. Journal of Natural Gas Science and Engineering, 52. pp. 390-400.

Suleman, Malik Shoaib and Lau, KK and Yeong, YF (2018) Enhanced gas separation performance of PSF membrane after modification to PSF/PDMS composite membrane in CO2/CH4 separation. Journal of Applied Polymer Science, 135 (1). p. 45650.

Suleman, Malik Shoaib and Lau, Kok Keong and Yeong, Yin Fong (2018) Experimental evaluation and theoretical prediction of CO2 & CH4 permeation in PSF/PDMS composite membrane under the influence of membrane swelling. The Canadian Journal of Chemical Engineering, 96 (8). pp. 1796-1804.

Soleimani, H. and Baig, M.K. and Yahya, N. and Khodapanah, L. and Sabet, M. and Demiral, B.M.R. and Burda, M. (2018) Synthesis of ZnO nanoparticles for oil�water interfacial tension reduction in enhanced oil recovery. Applied Physics A: Materials Science and Processing, 124 (2).

Subhani, A.R. and Kamel, N. and Mohamad Saad, M.N. and Nandagopal, N. and Kang, K. and Malik, A.S. (2018) Mitigation of stress: new treatment alternatives. Cognitive Neurodynamics, 12 (1).

Shameen, Z. and Yusoff, M.Z. and Saad, M.N.M. and Malik, A.S. and Muzammel, M. (2018) Electroencephalography (EEG) based drowsiness detection for drivers: A review. ARPN Journal of Engineering and Applied Sciences, 13 (4). pp. 1458-1464.

Setvati, M.R. and Mustaffa, Z. (2018) Rehabilitation of notched circular hollow sectional steel beam using CFRP patch. Steel and Composite Structures, 26 (2). pp. 151-161.

Seyedin, S.H. and Ardjmand, M. and Safekordi, A.A. and Raygan, S. and Zhalehrajabi, E. and Rahmanian, N. (2018) Using response surface methodology to optimize the operating parameters in a top-spray fluidized bed coating system. Surface and Coatings Technology, 334. pp. 43-49.

Singh, N. and Jangra, A. and Elamvazuthi, I. and Kashyap, K. (2018) Healthcare data privacy measures to cure & care cloud uncertainties. 4th IEEE International Conference on Signal Processing, Computing and Control, ISPCC 2017, 2017-J. pp. 402-407. (Submitted)

Samsudin, M.F.R. and Sufian, S. and Mohamed, N.M. and Bashiri, R. and Wolfe, F. and Ramli, R.M. (2018) Enhancement of hydrogen production over screen-printed TiO2/BiVO4 thin film in the photoelectrochemical cells. Materials Letters, 211. pp. 13-16.

Sovuthy, C. and Wen, W.P. and Osman, A.F. (2018) High Q realization of quasi dual-mode dual band bandpass filter. Asia-Pacific Microwave Conference Proceedings, APMC. pp. 237-240.

Saieed, A. and Pao, W. and Hashim, F.M. and Norpiah, R.B.M. (2018) Numerical study of gas-liquid flow maldistribution in a T-junction having very small diameter ratio. 3rd International Conference on Power Generation Systems and Renewable Energy Technologies, PGSRET 2017, 2018-J. pp. 136-141.

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Enhanced gas separation performance of PSF membrane after modification to PSF/PDMS composite membrane in CO2/CH4 separation. Journal of Applied Polymer Science, 135 (1).

Shahid, M.Z. and Maulud, A.S. and Bustam, M.A. (2018) Non-invasive monitoring of CO2 concentration in aqueous diethanolamine (DEA), methyldiethanolamine (MDEA) and their blends in high CO2 loading region using Raman spectroscopy and partial least square regression (PLSR). International Journal of Greenhouse Gas Control, 68. pp. 42-48.

Sivanathan, P. and Ismail, M.C. and Eng, K.K. (2018) Chloride Induced Stress Corrosion Cracking (CISCC) of austenitic stainless steel under thermal insulation at ambient temperature. Journal of Engineering and Applied Sciences, 13 (2). pp. 361-366.

Shaharun, S. and Shaharun, M.S. and Shah, M.F.M. and Amer, N.A. (2018) Catalytic performance of Cu/ZnO/Al2O3/ZrO2 for slurry methanol synthesis from CO hydrogenation: Effect of Cu/Zn molar ratio. Sains Malaysiana, 47 (1). pp. 207-214.

Sivalingam, J.R. and Kait, C.F. and Wilfred, C.D. (2018) CeO2-TiO2 photocatalyst: Ionic liquid-mediated synthesis, characterization, and performance for diisopropanolamine visible light degradation. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (1). pp. 170-178.

Supian, A.B.M. and Sapuan, S.M. and Zuhri, M.Y.M. and Zainudin, E.S. and Ya, H.H. (2018) Hybrid reinforced thermoset polymer composite in energy absorption tube application: A review. Defence Technology.

Shairi, N.A. and Zobilah, A.M. and Zakaria, Z. and Ahmad, B.H. and Zahari, M.K. and Ramli, F.A.M. and Wong, P.W. (2018) An Overview of Filter Integrated Switch (FIS) for RF and Microwave Applications. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-6). pp. 111-118.

Salam, M.A. and Ahmed, K. and Akter, N. and Hossain, T. and Abdullah, B. (2018) A review of hydrogen production via biomass gasification and its prospect in Bangladesh. International Journal of Hydrogen Energy.

Sazali, N. and Salleh, W.N.W. and Ismail, A.F. and Nordin, N.A.H.M. and Ismail, N.H. and Mohamed, M.A. and Aziz, F. and Yusof, N. and Jaafar, J. (2018) Incorporation of thermally labile additives in carbon membrane development for superior gas permeation performance. Journal of Natural Gas Science and Engineering, 49. pp. 376-384.

Siddiqui, N.A. and Ramkumar, M. and Rahman, A.H.A. and Mathew, M.J. and Santosh, M. and Sum, C.W. and Menier, D. (2018) High resolution facies architecture and digital outcrop modeling of the Sandakan formation sandstone reservoir, Borneo: Implications for reservoir characterization and flow simulation. Geoscience Frontiers.

S. R. M. Kutty, Kutty (2018) Copper Metal Removal using Sludge Activated Carbon Derived from Wastewater Treatment Sludge. Copper Metal Removal using Sludge Activated Carbon Derived from Wastewater Treatment Sludge, 203.

S. R. M. Kutty, Kutty (2018) Degradation of ammonia in an integrated anoxic-aerobic clarifier system. Degradation of ammonia in an integrated anoxic-aerobic clarifier system, 9. pp. 1060-1070.

S. R. M. Kutty, Kutty (2018) Effects of production conditions on yield and surface area of activated carbon derived from sugarcane bagasse. Effects of production conditions on yield and surface area of activated carbon derived from sugarcane bagasse. pp. 45-84.

Soleimani, H. and Baig, M.K. and Yahya, N. and Khodapanah, L. and Sabet, M. and Demiral, B.M.R. and Burda, M. (2018) Impact of carbon nanotubes based nanofluid on oil recovery efficiency using core flooding. Results in Physics, 9. pp. 39-48.

Shamshirgaran, S.R. and Khalaji Assadi, M. and Viswanatha Sharma, K. (2018) Application of nanomaterials in solar thermal energy storage. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 54 (6). pp. 1555-1577.

Suleman, H. and Maulud, A.S. and Man, Z. (2018) Experimental measurements and modelling of carbon dioxide solubility in aqueous AMP/MDEA and Piperazine/MDEA blends. Fluid Phase Equilibria, 463. pp. 142-148.

Shah, S.N. and Pranesh, M. and Raj, J.J. and Mutalib, M.I.A. and Lethesh, K.C. and Ghanem, O.B. and Ullah, Z. (2018) De-acidification of crude oil using supported ionic liquids phases. Separation and Purification Technology, 196. pp. 96-105.

Samsuri, S. and Amran, N.A. and Jusoh, M. (2018) Modelling of heat transfer for progressive freeze concentration process by spiral finned crystallizer. Chinese Journal of Chemical Engineering, 26 (5). pp. 970-975.

Sabet, M. and Soleimani, H. and Hosseini, S. (2018) Effect of addition graphene to ethylene vinyl acetate and low-density polyethylene. Journal of Vinyl and Additive Technology, 24. E177-E185.

Salman, H.M. and Wan Ahmad, W.F. and Sulaiman, S. (2018) Usability Evaluation of the Smartphone User Interface in Supporting Elderly Users from Experts' Perspective. IEEE Access, 6. pp. 22578-22591.

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Development, characterization and performance evaluation of a swelling resistant membrane for CO2/CH4 separation. Journal of Natural Gas Science and Engineering, 52. pp. 390-400.

Syed, Z.I. and Liew, M.S. and Rahman, S.A. and Palaniandy, D.K. (2018) Evaluation of Failure Capacity of Offshore Riser Protectors Under Vessel Impact. Journal of Failure Analysis and Prevention, 18 (2). pp. 280-290.

Shamshirgaran, S.R. and Assadi, M.K. and Al-Kayiem, H.H. and Sharma, K.V. (2018) The role of nanomaterials in the enhancement of non-concentrating solar collectors technology: Die Rolle von Nanomaterialien für die Weiterentwicklung der nicht konzentrierten Solarkollektorentechnologie. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 435-441.

Setiawan, J.D. and Baharom, M.B. and Bin Abdul Wali, M.A. (2018) Development of force feedback in steering systems for virtual driving simulator. MATEC Web of Conferences, 159.

Salaam, H.A. and Taha, Z. and Tuan Ya, T. (2018) Multi Objective Optimization Using Genetic Algorithm of a Pneumatic Connector. IOP Conference Series: Materials Science and Engineering, 319 (1).

Singa, P.K. and Isa, M.H. and Ho, Y.-C. and Lim, J.-W. (2018) Treatment of hazardous waste landfill leachate using Fenton oxidation process. E3S Web of Conferences, 34.

Sukeri, M. and Paiz Ismadi, M.Z. and Othman, A.R. and Kamaruddin, S. (2018) Wear Detection of Drill Bit by Image-based Technique. IOP Conference Series: Materials Science and Engineering, 328 (1).

Shahrestani, S. and Ismail, M.C. and Kakooei, S. and Beheshti, M. and Zabihiazadboni, M. and Zavareh, M.A. (2018) Iridium Oxide pH Sensor Based on Stainless Steel Wire for pH Mapping on Metal Surface. IOP Conference Series: Materials Science and Engineering, 328 (1).

Setiaji, H. and Paputungan, I.V. (2018) Design of Telegram Bots for Campus Information Sharing. IOP Conference Series: Materials Science and Engineering, 325 (1).

Shafiq, N. and Gardezi, S.S.S. and Nuruddin, M.F. and Abdullah Zawawi, N.A.W. (2018) Recurrent carbon footprint assessment and forecasting for conventional housing in tropical regions: A Malaysian case study. Environmental Progress and Sustainable Energy, 37 (2). pp. 839-849.

Saieed, A. and Pao, W. and Hashim, F.M. (2018) Effect of T-junction diameter ratio on stratified-wavy flow separation. Journal of Natural Gas Science and Engineering, 51. pp. 223-232.

Sikander, U. and Sufian, S. and KuShaari, K. and Chong, F.K. (2018) Effects of catalytic bed position on hydrogen production by methane decomposition. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3313-3320.

Salvinder, K.M.S. and Zabiri, H. and Isa, F. and Taqvi, S.A. and Roslan, M.A.H. and Shariff, A.M. (2018) Dynamic modelling, simulation and basic control of CO2 absorption based on high pressure pilot plant for natural gas treatment. International Journal of Greenhouse Gas Control, 70. pp. 164-177.

Shamim, M.Y. and Buang, A. and Shariff, A.M. and Anjum, H. (2018) Implementation of safety performance framework (SPF) in process industries to avoid disasters. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5022-5035.

Shehzad, N. and Johari, K. and Murugesan, T. and Tahir, M. (2018) Graphene Oxide as An Efficient Photocatalyst For Photocatalytic Reduction of CO2 Into Solar Fuel. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 4909-4918.

Saidu, A. and Wagiran, H. and Saeed, M.A. and Obayes, H.K. and Bala, A. and Usman, F. (2018) Thermoluminescence response of rare earth activated zinc lithium borate glass. Radiation Physics and Chemistry, 144. pp. 413-418.

Subhani, A.R. and Mumtaz, W. and Kamil, N. and Saad, N.M. and Nandagopal, N. and Malik, A.S. (2018) MRMR based feature selection for the classification of stress using EEG. Proceedings of the International Conference on Sensing Technology, ICST, 2017-D. pp. 1-4.

Samsuri, S. and Mohd Bakri, M.M. (2018) Optimization of fractional crystallization on crude biodiesel purification via response surface methodology. Separation Science and Technology (Philadelphia), 53 (3). pp. 567-572.

Sang, W.Y. and Ching, O.P. (2018) Tailoring MCM-41 mesoporous silica particles through modified sol-gel process for gas separation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 46-56.

Syed, Z.I. and Liew, M.S. and Rahman, S.A. and Palaniandy, D.K. (2018) Evaluation of Failure Capacity of Offshore Riser Protectors Under Vessel Impact. Journal of Failure Analysis and Prevention. pp. 1-11.

Suleman, H. and Maulud, A.S. and Shah, S.N. and Man, Z. and Mutalib, M.I.A. (2018) Thermodynamic modelling of liquid-liquid extraction systems involving ionic liquids: A new approach. Journal of Molecular Liquids, 252. pp. 18-23.

Salvinder, K.M.S. and Zabiri, H. and Isa, F. and Taqvi, S.A. and Roslan, M.A.H. and Shariff, A.M. (2018) Dynamic modelling, simulation and basic control of CO2 absorption based on high pressure pilot plant for natural gas treatment. International Journal of Greenhouse Gas Control, 70. pp. 164-177.

Saieed, A. and Pao, W. and Hewakandamby, B. and Azzopardi, B.J. and Wood, D.A. and Ali, H.M. (2018) Experimental investigation on the effect of diameter ratio on two-phase slug flow separation in a T-Junction. Journal of Petroleum Science and Engineering, 170. pp. 139-150.

Shahrestani, S. and Ismail, M.C. and Kakooei, S. and Beheshti, M. and Zabihiazadboni, M. and Zavareh, M.A. (2018) Iridium Oxide pH Sensor Based on Stainless Steel Wire for pH Mapping on Metal Surface. IOP Conference Series: Materials Science and Engineering, 328 (1).

Sivanathan, P. and Ismail, M.C. and Eng, K.K. (2018) Chloride Induced Stress Corrosion Cracking (CISCC) of austenitic stainless steel under thermal insulation at ambient temperature. Journal of Engineering and Applied Sciences, 13 (2). pp. 361-366.

Sabuan, N.A. and Zolkafli, N. and Mebrahitom, A. and Azhari, A. and Mamat, O. (2018) The development of Zirconia and Copper toughened Alumina ceramic insert. IOP Conference Series: Materials Science and Engineering, 342 (1).

Shaharun, S. and Shaharun, M.S. and Shah, M.F.M. and Amer, N.A. (2018) Catalytic performance of Cu/ZnO/Al2O3/ZrO2 for slurry methanol synthesis from CO hydrogenation: Effect of Cu/Zn molar ratio. Sains Malaysiana, 47 (1). pp. 207-214.

Salam, M.A. and Ahmed, K. and Akter, N. and Hossain, T. and Abdullah, B. (2018) A review of hydrogen production via biomass gasification and its prospect in Bangladesh. International Journal of Hydrogen Energy.

Satar, I. and Daud, W.R.W. and Kim, B.H. and Somalu, M.R. and Ghasemi, M. and Bakar, M.H.A. and Jafary, T. and Timmiati, S.N. (2018) Performance of titanium�nickel (Ti/Ni) and graphite felt-nickel (GF/Ni) electrodeposited by Ni as alternative cathodes for microbial fuel cells. Journal of the Taiwan Institute of Chemical Engineers, 89. pp. 67-76.

Sarwono, A. and Man, Z. and Bustam, M.A. and Subbarao, D. and Idris, A. and Muhammad, N. and Khan, A.S. and Ullah, Z. (2018) Swelling mechanism of urea cross-linked starch�lignin films in water. Environmental Technology (United Kingdom), 39 (12). pp. 1522-1532.

Shahid, M.Z. and Maulud, A.S. and Bustam, M.A. (2018) Non-invasive monitoring of CO2 concentration in aqueous diethanolamine (DEA), methyldiethanolamine (MDEA) and their blends in high CO2 loading region using Raman spectroscopy and partial least square regression (PLSR). International Journal of Greenhouse Gas Control, 68. pp. 42-48.

Saieed, A. and Pao, W. and Ali, H.M. (2018) Prediction of phase separation in a T-Junction. Experimental Thermal and Fluid Science, 97. pp. 160-179.

Saieed, A. and Pao, W. and Hashim, F.M. (2018) Effect of T-junction diameter ratio on stratified-wavy flow separation. Journal of Natural Gas Science and Engineering, 51. pp. 223-232.

Saieed, A. and Pao, W. and Hashim, F.M. and Norpiah, R.B.M. (2018) Numerical study of gas-liquid flow maldistribution in a T-junction having very small diameter ratio. 3rd International Conference on Power Generation Systems and Renewable Energy Technologies, PGSRET 2017, 2018-J. pp. 136-141.

Shamim, M.Y. and Buang, A. and Shariff, A.M. and Anjum, H. (2018) Implementation of safety performance framework (SPF) in process industries to avoid disasters. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5022-5035.

Salvinder, K.M.S. and Zabiri, H. and Isa, F. and Taqvi, S.A. and Roslan, M.A.H. and Shariff, A.M. (2018) Dynamic modelling, simulation and basic control of CO2 absorption based on high pressure pilot plant for natural gas treatment. International Journal of Greenhouse Gas Control, 70. pp. 164-177.

Saieed, A. and Pao, W. and Hewakandamby, B. and Azzopardi, B.J. and Wood, D.A. and Ali, H.M. (2018) Experimental investigation on the effect of diameter ratio on two-phase slug flow separation in a T-Junction. Journal of Petroleum Science and Engineering, 170. pp. 139-150.

Saieed, A. and Pao, W. and Ali, H.M. (2018) Prediction of phase separation in a T-Junction. Experimental Thermal and Fluid Science, 97. pp. 160-179.

Safdar, R. and Omar, A.A. and Lal, B. (2018) Performance of aqueous tetrabutylammonium hydroxide, piperazine and their blends for carbon dioxide capture. Journal of Molecular Liquids, 266. pp. 522-528.

Shah, M.U.H. and Sivapragasam, M. and Moniruzzaman, M. and Talukder, M.M.R. and Yusup, S.B. and Goto, M. (2018) Aggregation behavior and antimicrobial activity of a micellar system of binary ionic liquids. Journal of Molecular Liquids, 266. pp. 568-576.

Safiyullah, F. and Sulaiman, S.A. and Naz, M.Y. and Jasmani, M.S. and Ghazali, S.M.A. (2018) Prediction on performance degradation and maintenance of centrifugal gas compressors using genetic programming. Energy, 158. pp. 485-494.

Sarwono, A. and Man, Z. and Idris, A. and Nee, T.H. and Muhammad, N. and Khan, A.S. and Ullah, Z. (2018) Alkyd paint removal: Ionic liquid vs volatile organic compound (VOC). Progress in Organic Coatings, 122. pp. 79-87.

Saman, N. and Tan, J.-W. and Mohtar, S.S. and Kong, H. and Lye, J.W.P. and Johari, K. and Hassan, H. and Mat, H. (2018) Selective biosorption of aurum(III) from aqueous solution using oil palm trunk (OPT) biosorbents: Equilibrium, kinetic and mechanism analyses. Biochemical Engineering Journal, 136. pp. 78-87.

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Experimental evaluation and theoretical prediction of CO2 & CH4 permeation in PSF/PDMS composite membrane under the influence of membrane swelling. Canadian Journal of Chemical Engineering, 96 (8). pp. 1796-1804.

Sethi, M.A.J. and Hussin, F.A. and Hamid, N.H. (2018) Bio-inspired network on chip having both guaranteed throughput and best effort services using fault-tolerant algorithm. IEEJ Transactions on Electrical and Electronic Engineering, 13 (8). pp. 1153-1162.

Satar, I. and Daud, W.R.W. and Kim, B.H. and Somalu, M.R. and Ghasemi, M. and Bakar, M.H.A. and Jafary, T. and Timmiati, S.N. (2018) Performance of titanium�nickel (Ti/Ni) and graphite felt-nickel (GF/Ni) electrodeposited by Ni as alternative cathodes for microbial fuel cells. Journal of the Taiwan Institute of Chemical Engineers, 89. pp. 67-76.

Singh, D. and Murugaiyah, V. and Hamid, S.B.S. and Kasinather, V. and Chan, M.S.A. and Ho, E.T.W. and Grundmann, O. and Chear, N.J.Y. and Mansor, S.M. (2018) Assessment of gonadotropins and testosterone hormone levels in regular Mitragyna speciosa (Korth.) users. Journal of Ethnopharmacology, 221. pp. 30-36.

Suleman, H. and Maulud, A.S. and Syalsabila, A. (2018) Thermodynamic modelling of carbon dioxide solubility in aqueous amino acid salt solutions and their blends with alkanolamines. Journal of CO2 Utilization, 26. pp. 336-349.

Sachan, S. and Adnan, N. (2018) Stochastic charging of electric vehicles in smart power distribution grids. Sustainable Cities and Society, 40. pp. 91-100.

Samat, N.A.S.A. and Zabiri, H. and Kamaruddin, B. (2018) The development and investigation analysis of an arx-based generalized likelihood ratio (GLR) stiction detection method. Jurnal Teknologi, 80 (4). pp. 1-16.

Shehzad, N. and Tahir, M. and Johari, K. and Murugesan, T. and Hussain, M. (2018) A critical review on TiO2 based photocatalytic CO2 reduction system: Strategies to improve efficiency. Journal of CO2 Utilization, 26. pp. 98-122.

Shahriar, M.R. and Borghesani, P. and Tan, A.C.C. (2018) Electrical Signature Analysis-Based Detection of External Bearing Faults in Electromechanical Drivetrains. IEEE Transactions on Industrial Electronics, 65 (7). pp. 5941-5950.

Sarwono, A. and Man, Z. and Bustam, M.A. and Subbarao, D. and Idris, A. and Muhammad, N. and Khan, A.S. and Ullah, Z. (2018) Swelling mechanism of urea cross-linked starch�lignin films in water. Environmental Technology (United Kingdom), 39 (12). pp. 1522-1532.

Shoieba, M.A. and Sum, C.W. and Abidin, N.S.Z. and Bhattachary, S.K. (2018) The organic geochemical characterization: An indication of type of kerogen and maturity of early - Mid Jurassic shale in the Blue Nile formation. AIP Conference Proceedings, 1972.

Seo, J.H. and Kim, D.K. and Choi, H.S. and Yu, S.Y. and Park, K.S. (2018) Simplified Technique for Predicting Offshore Pipeline Expansion. Journal of Marine Science and Application. pp. 1-11.

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. and Bakhsh, S.T. (2018) An Analytical and Experimental Approach to Diagnose Unbalanced Voltage Supply. Arabian Journal for Science and Engineering, 43 (6). pp. 2735-2746.

Sabil, K.M. and Partoon, B. (2018) Recent advances on carbon dioxide capture through a hydrate-based gas separation process. Current Opinion in Green and Sustainable Chemistry, 11. pp. 22-26.

Sallih, N. and Lescher, P. and Bhattacharyya, D. (2018) Flatwise Compressive Properties of Kenaf/Polypropylene Honeycomb Core. IOP Conference Series: Materials Science and Engineering, 370 (1).

Shamshirgaran, S. and Assadi, M.K. and Al-Kayiem, H.H. and Sharma, K.V. (2018) Energetic and exergetic performance of a solar flat-plate collector working with cu nanofluid. Journal of Solar Energy Engineering, Transactions of the ASME, 140 (3).

Soleimani, H. and Baig, M.K. and Yahya, N. and Khodapanah, L. and Sabet, M. and Demiral, B.M.R. and Burda, M. (2018) Impact of carbon nanotubes based nanofluid on oil recovery efficiency using core flooding. Results in Physics, 9. pp. 39-48.

Shamshirgaran, S.R. and Khalaji Assadi, M. and Viswanatha Sharma, K. (2018) Application of nanomaterials in solar thermal energy storage. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 54 (6). pp. 1555-1577.

Suleman, H. and Maulud, A.S. and Man, Z. (2018) Experimental measurements and modelling of carbon dioxide solubility in aqueous AMP/MDEA and Piperazine/MDEA blends. Fluid Phase Equilibria, 463. pp. 142-148.

Shah, S.N. and Pranesh, M. and Raj, J.J. and Mutalib, M.I.A. and Lethesh, K.C. and Ghanem, O.B. and Ullah, Z. (2018) De-acidification of crude oil using supported ionic liquids phases. Separation and Purification Technology, 196. pp. 96-105.

Samsuri, S. and Amran, N.A. and Jusoh, M. (2018) Modelling of heat transfer for progressive freeze concentration process by spiral finned crystallizer. Chinese Journal of Chemical Engineering, 26 (5). pp. 970-975.

Sabet, M. and Soleimani, H. and Hosseini, S. (2018) Effect of addition graphene to ethylene vinyl acetate and low-density polyethylene. Journal of Vinyl and Additive Technology, 24. E177-E185.

Salman, H.M. and Wan Ahmad, W.F. and Sulaiman, S. (2018) Usability Evaluation of the Smartphone User Interface in Supporting Elderly Users from Experts' Perspective. IEEE Access, 6. pp. 22578-22591.

Saieed, A. and Pao, W. and Hashim, F.M. (2018) Effect of T-junction diameter ratio on stratified-wavy flow separation. Journal of Natural Gas Science and Engineering, 51. pp. 223-232.

Sikander, U. and Sufian, S. and KuShaari, K. and Chong, F.K. (2018) Effects of catalytic bed position on hydrogen production by methane decomposition. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3313-3320.

Salvinder, K.M.S. and Zabiri, H. and Isa, F. and Taqvi, S.A. and Roslan, M.A.H. and Shariff, A.M. (2018) Dynamic modelling, simulation and basic control of CO2 absorption based on high pressure pilot plant for natural gas treatment. International Journal of Greenhouse Gas Control, 70. pp. 164-177.

Shehzad, N. and Johari, K. and Murugesan, T. and Tahir, M. (2018) Graphene Oxide as An Efficient Photocatalyst For Photocatalytic Reduction of CO2 Into Solar Fuel. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 4909-4918.

Shahid, M.Z. and Maulud, A.S. and Bustam, M.A. (2018) Non-invasive monitoring of CO2 concentration in aqueous diethanolamine (DEA), methyldiethanolamine (MDEA) and their blends in high CO2 loading region using Raman spectroscopy and partial least square regression (PLSR). International Journal of Greenhouse Gas Control, 68. pp. 42-48.

Sivanathan, P. and Ismail, M.C. and Eng, K.K. (2018) Chloride Induced Stress Corrosion Cracking (CISCC) of austenitic stainless steel under thermal insulation at ambient temperature. Journal of Engineering and Applied Sciences, 13 (2). pp. 361-366.

Shaharun, S. and Shaharun, M.S. and Shah, M.F.M. and Amer, N.A. (2018) Catalytic performance of Cu/ZnO/Al2O3/ZrO2 for slurry methanol synthesis from CO hydrogenation: Effect of Cu/Zn molar ratio. Sains Malaysiana, 47 (1). pp. 207-214.

Sivalingam, J.R. and Kait, C.F. and Wilfred, C.D. (2018) CeO2-TiO2 photocatalyst: Ionic liquid-mediated synthesis, characterization, and performance for diisopropanolamine visible light degradation. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (1). pp. 170-178.

Supian, A.B.M. and Sapuan, S.M. and Zuhri, M.Y.M. and Zainudin, E.S. and Ya, H.H. (2018) Hybrid reinforced thermoset polymer composite in energy absorption tube application: A review. Defence Technology.

Shairi, N.A. and Zobilah, A.M. and Zakaria, Z. and Ahmad, B.H. and Zahari, M.K. and Ramli, F.A.M. and Wong, P.W. (2018) An Overview of Filter Integrated Switch (FIS) for RF and Microwave Applications. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-6). pp. 111-118.

Salam, M.A. and Ahmed, K. and Akter, N. and Hossain, T. and Abdullah, B. (2018) A review of hydrogen production via biomass gasification and its prospect in Bangladesh. International Journal of Hydrogen Energy.

Sazali, N. and Salleh, W.N.W. and Ismail, A.F. and Nordin, N.A.H.M. and Ismail, N.H. and Mohamed, M.A. and Aziz, F. and Yusof, N. and Jaafar, J. (2018) Incorporation of thermally labile additives in carbon membrane development for superior gas permeation performance. Journal of Natural Gas Science and Engineering, 49. pp. 376-384.

Siddiqui, N.A. and Ramkumar, M. and Rahman, A.H.A. and Mathew, M.J. and Santosh, M. and Sum, C.W. and Menier, D. (2018) High resolution facies architecture and digital outcrop modeling of the Sandakan formation sandstone reservoir, Borneo: Implications for reservoir characterization and flow simulation. Geoscience Frontiers.

Saieed, A. and Pao, W. and Hewakandamby, B. and Azzopardi, B.J. and Wood, D.A. and Ali, H.M. (2018) Experimental investigation on the effect of diameter ratio on two-phase slug flow separation in a T-Junction. Journal of Petroleum Science and Engineering, 170. pp. 139-150.

Saieed, A. and Pao, W. and Ali, H.M. (2018) Prediction of phase separation in a T-Junction. Experimental Thermal and Fluid Science, 97. pp. 160-179.

Safdar, R. and Omar, A.A. and Lal, B. (2018) Performance of aqueous tetrabutylammonium hydroxide, piperazine and their blends for carbon dioxide capture. Journal of Molecular Liquids, 266. pp. 522-528.

Shah, M.U.H. and Sivapragasam, M. and Moniruzzaman, M. and Talukder, M.M.R. and Yusup, S.B. and Goto, M. (2018) Aggregation behavior and antimicrobial activity of a micellar system of binary ionic liquids. Journal of Molecular Liquids, 266. pp. 568-576.

Safiyullah, F. and Sulaiman, S.A. and Naz, M.Y. and Jasmani, M.S. and Ghazali, S.M.A. (2018) Prediction on performance degradation and maintenance of centrifugal gas compressors using genetic programming. Energy, 158. pp. 485-494.

Sarwono, A. and Man, Z. and Idris, A. and Nee, T.H. and Muhammad, N. and Khan, A.S. and Ullah, Z. (2018) Alkyd paint removal: Ionic liquid vs volatile organic compound (VOC). Progress in Organic Coatings, 122. pp. 79-87.

Saman, N. and Tan, J.-W. and Mohtar, S.S. and Kong, H. and Lye, J.W.P. and Johari, K. and Hassan, H. and Mat, H. (2018) Selective biosorption of aurum(III) from aqueous solution using oil palm trunk (OPT) biosorbents: Equilibrium, kinetic and mechanism analyses. Biochemical Engineering Journal, 136. pp. 78-87.

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Experimental evaluation and theoretical prediction of CO2 & CH4 permeation in PSF/PDMS composite membrane under the influence of membrane swelling. Canadian Journal of Chemical Engineering, 96 (8). pp. 1796-1804.

Sethi, M.A.J. and Hussin, F.A. and Hamid, N.H. (2018) Bio-inspired network on chip having both guaranteed throughput and best effort services using fault-tolerant algorithm. IEEJ Transactions on Electrical and Electronic Engineering, 13 (8). pp. 1153-1162.

Satar, I. and Daud, W.R.W. and Kim, B.H. and Somalu, M.R. and Ghasemi, M. and Bakar, M.H.A. and Jafary, T. and Timmiati, S.N. (2018) Performance of titanium�nickel (Ti/Ni) and graphite felt-nickel (GF/Ni) electrodeposited by Ni as alternative cathodes for microbial fuel cells. Journal of the Taiwan Institute of Chemical Engineers, 89. pp. 67-76.

Singh, D. and Murugaiyah, V. and Hamid, S.B.S. and Kasinather, V. and Chan, M.S.A. and Ho, E.T.W. and Grundmann, O. and Chear, N.J.Y. and Mansor, S.M. (2018) Assessment of gonadotropins and testosterone hormone levels in regular Mitragyna speciosa (Korth.) users. Journal of Ethnopharmacology, 221. pp. 30-36.

Suleman, H. and Maulud, A.S. and Syalsabila, A. (2018) Thermodynamic modelling of carbon dioxide solubility in aqueous amino acid salt solutions and their blends with alkanolamines. Journal of CO2 Utilization, 26. pp. 336-349.

Sachan, S. and Adnan, N. (2018) Stochastic charging of electric vehicles in smart power distribution grids. Sustainable Cities and Society, 40. pp. 91-100.

Samat, N.A.S.A. and Zabiri, H. and Kamaruddin, B. (2018) The development and investigation analysis of an arx-based generalized likelihood ratio (GLR) stiction detection method. Jurnal Teknologi, 80 (4). pp. 1-16.

Shehzad, N. and Tahir, M. and Johari, K. and Murugesan, T. and Hussain, M. (2018) A critical review on TiO2 based photocatalytic CO2 reduction system: Strategies to improve efficiency. Journal of CO2 Utilization, 26. pp. 98-122.

Shahriar, M.R. and Borghesani, P. and Tan, A.C.C. (2018) Electrical Signature Analysis-Based Detection of External Bearing Faults in Electromechanical Drivetrains. IEEE Transactions on Industrial Electronics, 65 (7). pp. 5941-5950.

Sarwono, A. and Man, Z. and Bustam, M.A. and Subbarao, D. and Idris, A. and Muhammad, N. and Khan, A.S. and Ullah, Z. (2018) Swelling mechanism of urea cross-linked starch�lignin films in water. Environmental Technology (United Kingdom), 39 (12). pp. 1522-1532.

Shoieba, M.A. and Sum, C.W. and Abidin, N.S.Z. and Bhattachary, S.K. (2018) The organic geochemical characterization: An indication of type of kerogen and maturity of early - Mid Jurassic shale in the Blue Nile formation. AIP Conference Proceedings, 1972.

Seo, J.H. and Kim, D.K. and Choi, H.S. and Yu, S.Y. and Park, K.S. (2018) Simplified Technique for Predicting Offshore Pipeline Expansion. Journal of Marine Science and Application. pp. 1-11.

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. and Bakhsh, S.T. (2018) An Analytical and Experimental Approach to Diagnose Unbalanced Voltage Supply. Arabian Journal for Science and Engineering, 43 (6). pp. 2735-2746.

Sabil, K.M. and Partoon, B. (2018) Recent advances on carbon dioxide capture through a hydrate-based gas separation process. Current Opinion in Green and Sustainable Chemistry, 11. pp. 22-26.

Sallih, N. and Lescher, P. and Bhattacharyya, D. (2018) Flatwise Compressive Properties of Kenaf/Polypropylene Honeycomb Core. IOP Conference Series: Materials Science and Engineering, 370 (1).

Shamshirgaran, S. and Assadi, M.K. and Al-Kayiem, H.H. and Sharma, K.V. (2018) Energetic and exergetic performance of a solar flat-plate collector working with cu nanofluid. Journal of Solar Energy Engineering, Transactions of the ASME, 140 (3).

Sarwono, A. and Man, Z. and Bustam, M.A. and Subbarao, D. and Idris, A. and Muhammad, N. and Khan, A.S. and Ullah, Z. (2018) Swelling mechanism of urea cross-linked starch�lignin films in water. Environmental Technology (United Kingdom), 39 (12). pp. 1522-1532.

Shahid, M.Z. and Maulud, A.S. and Bustam, M.A. (2018) Non-invasive monitoring of CO2 concentration in aqueous diethanolamine (DEA), methyldiethanolamine (MDEA) and their blends in high CO2 loading region using Raman spectroscopy and partial least square regression (PLSR). International Journal of Greenhouse Gas Control, 68. pp. 42-48.

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Experimental evaluation and theoretical prediction of CO2 & CH4 permeation in PSF/PDMS composite membrane under the influence of membrane swelling. Canadian Journal of Chemical Engineering, 96 (8). pp. 1796-1804.

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Development, characterization and performance evaluation of a swelling resistant membrane for CO2/CH4 separation. Journal of Natural Gas Science and Engineering, 52. pp. 390-400.

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Enhanced gas separation performance of PSF membrane after modification to PSF/PDMS composite membrane in CO2/CH4 separation. Journal of Applied Polymer Science, 135 (1).

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Experimental evaluation and theoretical prediction of CO2 & CH4 permeation in PSF/PDMS composite membrane under the influence of membrane swelling. Canadian Journal of Chemical Engineering, 96 (8). pp. 1796-1804.

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Development, characterization and performance evaluation of a swelling resistant membrane for CO2/CH4 separation. Journal of Natural Gas Science and Engineering, 52. pp. 390-400.

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Enhanced gas separation performance of PSF membrane after modification to PSF/PDMS composite membrane in CO2/CH4 separation. Journal of Applied Polymer Science, 135 (1).

Shamim, M.Y. and Buang, A. and Shariff, A.M. and Anjum, H. (2018) Implementation of safety performance framework (SPF) in process industries to avoid disasters. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5022-5035.

Safdar, R. and Omar, A.A. and Lal, B. (2018) Performance of aqueous tetrabutylammonium hydroxide, piperazine and their blends for carbon dioxide capture. Journal of Molecular Liquids, 266. pp. 522-528.

Sivalingam, J.R. and Kait, C.F. and Wilfred, C.D. (2018) CeO2-TiO2 photocatalyst: Ionic liquid-mediated synthesis, characterization, and performance for diisopropanolamine visible light degradation. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (1). pp. 170-178.

Sivalingam, J.R. and Kait, C.F. and Wilfred, C.D. (2018) CeO2-TiO2 photocatalyst: Ionic liquid-mediated synthesis, characterization, and performance for diisopropanolamine visible light degradation. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (1). pp. 170-178.

Suleman, H. and Maulud, A.S. and Syalsabila, A. (2018) Thermodynamic modelling of carbon dioxide solubility in aqueous amino acid salt solutions and their blends with alkanolamines. Journal of CO2 Utilization, 26. pp. 336-349.

Suleman, H. and Maulud, A.S. and Man, Z. (2018) Experimental measurements and modelling of carbon dioxide solubility in aqueous AMP/MDEA and Piperazine/MDEA blends. Fluid Phase Equilibria, 463. pp. 142-148.

Suleman, H. and Maulud, A.S. and Shah, S.N. and Man, Z. and Mutalib, M.I.A. (2018) Thermodynamic modelling of liquid-liquid extraction systems involving ionic liquids: A new approach. Journal of Molecular Liquids, 252. pp. 18-23.

Shahid, M.Z. and Maulud, A.S. and Bustam, M.A. (2018) Non-invasive monitoring of CO2 concentration in aqueous diethanolamine (DEA), methyldiethanolamine (MDEA) and their blends in high CO2 loading region using Raman spectroscopy and partial least square regression (PLSR). International Journal of Greenhouse Gas Control, 68. pp. 42-48.

Sarwono, A. and Man, Z. and Bustam, M.A. and Subbarao, D. and Idris, A. and Muhammad, N. and Khan, A.S. and Ullah, Z. (2018) Swelling mechanism of urea cross-linked starch�lignin films in water. Environmental Technology (United Kingdom), 39 (12). pp. 1522-1532.

Shahid, M.Z. and Maulud, A.S. and Bustam, M.A. (2018) Non-invasive monitoring of CO2 concentration in aqueous diethanolamine (DEA), methyldiethanolamine (MDEA) and their blends in high CO2 loading region using Raman spectroscopy and partial least square regression (PLSR). International Journal of Greenhouse Gas Control, 68. pp. 42-48.

Samat, N.A.S.A. and Zabiri, H. and Kamaruddin, B. (2018) The development and investigation analysis of an arx-based generalized likelihood ratio (GLR) stiction detection method. Jurnal Teknologi, 80 (4). pp. 1-16.

Suleman, Malik Shoaib and Lau, Kok Keong and Yeong, Yin Fong (2018) Experimental evaluation and theoretical prediction of CO2 & CH4 permeation in PSF/PDMS composite membrane under the influence of membrane swelling. The Canadian Journal of Chemical Engineering, 96 (8). pp. 1796-1804.

Suleman, Malik Shoaib and Lau, KK and Yeong, YF (2018) Development, characterization and performance evaluation of a swelling resistant membrane for CO2/CH4 separation. Journal of Natural Gas Science and Engineering, 52. pp. 390-400.

Suleman, Malik Shoaib and Lau, KK and Yeong, YF (2018) Enhanced gas separation performance of PSF membrane after modification to PSF/PDMS composite membrane in CO2/CH4 separation. Journal of Applied Polymer Science, 135 (1). p. 45650.

Shokrollahi, F and Lau, KK and Tay, WH and Lai, LS (2018) Power measurement by calorimetric method using water infrequency range between 1.7 Mhz to 3 Mhz. Int J Eng Technol, 7. pp. 106-109.

Shah, Mansoor Ul Hassan and Sivapragasam, Magaret and Moniruzzaman, Muhammad and Talukder, Md Mahabubur Rahman and Yusup, Suzana Bt and Goto, Masahiro (2018) Aggregation behavior and antimicrobial activity of a micellar system of binary ionic liquids. Journal of Molecular Liquids, 266. pp. 568-576.

Shah, Mansoor Ul Hassan and Sivapragasam, Magaret and Moniruzzaman, Muhammad and Talukder, Md Mahabubur Rahman and Yusup, Suzana Bt (2018) Dispersion of crude oil by choline based ionic liquids. Materials Today: Proceedings, 5 (10). pp. 21661-21666.

T

Teh, Weng Kean and Zabiri, Haslinda and Samyudia, Yudi and Jeremiah, Sean S and Kamaruddin, Bashariah and Mohd Amiruddin, Azhari AA and M. Ramli, Nasser (2018) An improved diagnostic tool for control valve stiction based on nonlinear principle component analysis. Industrial & Engineering Chemistry Research, 57 (33). pp. 11350-11365.

Taqvi, Syed A and Tufa, Lemma Dendena and Zabiri, Haslinda and Maulud, Abdulhalim Shah and Uddin, Fahim (2018) Multiple fault diagnosis in distillation column using multikernel support vector machine. Industrial & Engineering Chemistry Research, 57 (43). pp. 14689-14706.

Tan, LS and Shariff, AM and Lau, KK and Tsuji, T (2018) Modification of effective surface area correlation for structured packed absorption column at elevated pressures. Materials today: proceedings, 5 (10). pp. 22085-22092.

Tan, LS and Shariff, AM and Lau, KK and Tsuji, T (2018) Modification of effective surface area correlation for structured packed absorption column at elevated pressures. Materials today: proceedings, 5 (10). pp. 22085-22092.

Tan, S.C. and Wang, S. and Watada, J. (2018) A self-adaptive class-imbalance TSK neural network with applications to semiconductor defects detection. Information Sciences, 427. pp. 1-17.

Toh, Y.L. and Lin, C.-H. and Wong, P.W. and Kuo, J.-T. (2018) Implementation of second-order open-loop resonator filter with skew-symmetric input/output coupling structure. Asia-Pacific Microwave Conference Proceedings, APMC. pp. 734-736.

Trinh, H. and Yusup, S. and Uemura, Y. (2018) Optimization and kinetic study of ultrasonic assisted esterification process from rubber seed oil. Bioresource Technology, 247. pp. 51-57.

Tuan, T.T. and Tufa, L.D. and Mutalib, M.I.A. and Ramli, N.M. (2018) Optimal operation of a process by integrating dynamic economic optimization and model predictive control formulated with empirical model. Archives of Control Sciences, 28 (1). pp. 35-50.

Tan, X.B. and Lam, M.K. and Uemura, Y. and Lim, J.W. and Wong, C.Y. and Lee, K.T. (2018) Cultivation of microalgae for biodiesel production: A review on upstream and downstream processing. Chinese Journal of Chemical Engineering, 26 (1). pp. 17-30.

Ting, H. and Lau, W.M. and Cheah, J.-H. and Yacob, Y. and Memon, M.A. and Lau, E. (2018) Perceived quality and intention to revisit coffee concept shops in Malaysia: A mixed-methods approach. British Food Journal, 120 (5). pp. 1106-1119.

Tan, X.B. and Lam, M.K. and Uemura, Y. and Lim, J.W. and Wong, C.Y. and Ramli, A. and Kiew, P.L. and Lee, K.T. (2018) Semi-continuous cultivation of Chlorella vulgaris using chicken compost as nutrients source: Growth optimization study and fatty acid composition analysis. Energy Conversion and Management, 164. pp. 363-373.

Thiruchelvam, L. and Dass, S.C. and Zaki, R. and Yahya, A. and Asirvadam, V.S. (2018) Correlation analysis of air pollutant index levels and dengue cases across five different zones in Selangor, Malaysia. Geospatial Health, 13 (1). pp. 102-109.

Ting, D.H. (2018) Modeling the customer satisfaction function: a two-country comparison. Electronic Markets, 28 (2). pp. 163-175.

Tahir, T. and Hashim, A.M. and Yusof, K.W. (2018) Statistical downscaling of rainfall under transitional climate in Limbang River Basin by using SDSM. IOP Conference Series: Earth and Environmental Science, 140 (1).

Tan, W.-N. and Lim, J.-Q. and Afiqah, F. and Nik Mohamed Kamal, N.N.S. and Abdul Aziz, F.A. and Tong, W.-Y. and Leong, C.-R. and Lim, J.-W. (2018) Chemical composition and cytotoxic activity of Garcinia atroviridis Griff. ex T. Anders. essential oils in combination with tamoxifen. Natural Product Research, 32 (7). pp. 854-858.

Tran, C.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Sabo Miya, H. (2018) Internal model control for industrial wireless plant using WirelessHART hardware-in-the-loop simulator. ISA Transactions, 75. pp. 236-246.

Tijani, M.M. and Aqsha, A. and Mahinpey, N. (2018) X-ray diffraction and TGA kinetic analyses for chemical looping combustion applications. Data in Brief, 17. pp. 200-209.

Toloue, I. and Liew, M.S. and Harahap, I.S.H. and Lee, H.E. (2018) A novel approach to enhance the accuracy of vibration control of Frames. E3S Web of Conferences, 34.

Tahir, Z. and Ilyas, A. and Li, X. and Bilad, M.R. and Vankelecom, I.F.J. and Khan, A.L. (2018) Tuning the gas separation performance of fluorinated and sulfonated PEEK membranes by incorporation of zeolite 4A. Journal of Applied Polymer Science, 135 (10).

Tachmammedov, S. and Hooi, Y.K. and Kalid, K.S. (2018) Automated multi-factor analytics for cheat-proofing attendance-taking. ACM International Conference Proceeding Series. pp. 183-188.

Thangasamy, V. and Kamsani, N.A. and Zulkifli, T.Z.A. (2018) Switching power control for multimode multiband power amplifier. Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics, 2017-O. pp. 121-124.

Theng, S.G. and Jumbri, K. and Wirzal, M.D.H. (2018) Molecular dynamics simulation of membrane in room temperature ionic liquids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 38-45.

Theng, S.G. and Jumbri, K. and Wirzal, M.D.H. (2018) Molecular dynamics simulation of membrane in room temperature ionic liquids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 38-45.

Tijani, M.M. and Aqsha, A. and Yu, N. and Mahinpey, N. (2018) Determination of redox pathways of supported bimetallic oxygen carriers in a methane fuelled chemical looping combustion system. Fuel, 233. pp. 133-145.

Tan, X.B. and Lam, M.K. and Uemura, Y. and Lim, J.W. and Wong, C.Y. and Ramli, A. and Kiew, P.L. and Lee, K.T. (2018) Semi-continuous cultivation of Chlorella vulgaris using chicken compost as nutrients source: Growth optimization study and fatty acid composition analysis. Energy Conversion and Management, 164. pp. 363-373.

Thiruchelvam, L. and Dass, S.C. and Zaki, R. and Yahya, A. and Asirvadam, V.S. (2018) Correlation analysis of air pollutant index levels and dengue cases across five different zones in Selangor, Malaysia. Geospatial Health, 13 (1). pp. 102-109.

Ting, D.H. (2018) Modeling the customer satisfaction function: a two-country comparison. Electronic Markets, 28 (2). pp. 163-175.

Trinh, H. and Yusup, S. and Uemura, Y. (2018) Optimization and kinetic study of ultrasonic assisted esterification process from rubber seed oil. Bioresource Technology, 247. pp. 51-57.

Tuan, T.T. and Tufa, L.D. and Mutalib, M.I.A. and Ramli, N.M. (2018) Optimal operation of a process by integrating dynamic economic optimization and model predictive control formulated with empirical model. Archives of Control Sciences, 28 (1). pp. 35-50.

Tan, X.B. and Lam, M.K. and Uemura, Y. and Lim, J.W. and Wong, C.Y. and Lee, K.T. (2018) Cultivation of microalgae for biodiesel production: A review on upstream and downstream processing. Chinese Journal of Chemical Engineering, 26 (1). pp. 17-30.

Ting, H. and Lau, W.M. and Cheah, J.-H. and Yacob, Y. and Memon, M.A. and Lau, E. (2018) Perceived quality and intention to revisit coffee concept shops in Malaysia: A mixed-methods approach. British Food Journal, 120 (5). pp. 1106-1119.

Tijani, M.M. and Aqsha, A. and Yu, N. and Mahinpey, N. (2018) Determination of redox pathways of supported bimetallic oxygen carriers in a methane fuelled chemical looping combustion system. Fuel, 233. pp. 133-145.

Theng, S.G. and Jumbri, K. and Wirzal, M.D.H. (2018) Molecular dynamics simulation of membrane in room temperature ionic liquids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 38-45.

Tan, LS and Shariff, AM and Lau, KK and Tsuji, T (2018) Modification of effective surface area correlation for structured packed absorption column at elevated pressures. Materials today: proceedings, 5 (10). pp. 22085-22092.

U

Uddin, Fahim and Tufa, Lemma Dendena and Maulud, Abdulhalim Shah (2018) Consistent and effective nonlinearity index and its application on model predictive controller performance deterioration. Industrial & Engineering Chemistry Research, 57 (43). pp. 14596-14606.

Ullah, Z. and Khan, A.S. and Muhammad, N. and Ullah, R. and Alqahtani, A.S. and Shah, S.N. and Ghanem, O.B. and Bustam, M.A. and Man, Z. (2018) A review on ionic liquids as perspective catalysts in transesterification of different feedstock oil into biodiesel. Journal of Molecular Liquids, 266. pp. 673-686.

Ullah, B. and Ovinis, M. and Baharom, M.B. and Ali, S.S.A. and Javaid, M.Y. (2018) Pitch and depth control of underwater glider using LQG and LQR via Kalman filter. International Journal of Vehicle Structures and Systems, 10 (2). pp. 137-141.

Ullah, H. and Azizli, K.A.M. and Man, Z.B. and Ismail, M.B.C. and Rehman, S.U. and Khan, M.I. (2018) Efficient Entrapment of Oxirane Ring Containing Compounds in Thermally Stable Poly(urea-formaldehyde) Polymer Shell Wall. Polymer Science - Series B, 60 (1). pp. 20-34.

Ur Rehman, M.J. and Dass, S.C. and Asirvadam, V.S. (2018) A Bayesian parameter learning procedure for nonlinear dynamical systems via the ensemble Kalman filter. Proceedings - 2018 IEEE 14th International Colloquium on Signal Processing and its Application, CSPA 2018. pp. 161-166.

Uddin, F. and Tufa, L.D. and Shah Maulud, A. and Taqvi, S.A. (2018) System Behavior and Predictive Controller Performance Near the Azeotropic Region. Chemical Engineering and Technology, 41 (4). pp. 806-818.

Usman Shah, S.M. and Abdullah, M.A. (2018) Effects of macro/micronutrients on green and brown microalgal cell growth and fatty acids in photobioreactor and open-tank systems. Biocatalysis and Agricultural Biotechnology, 14. pp. 10-17.

Ullah Khan, I. and Othman, M.H.D. and Ismail, A.F. and Matsuura, T. and Hashim, H. and Nordin, N.A.H.M. and Rahman, M.A. and Jaafar, J. and Jilani, A. (2018) Status and improvement of dual-layer hollow fiber membranes via co-extrusion process for gas separation: A review. Journal of Natural Gas Science and Engineering, 52. pp. 215-234.

Uddin, M. and Romlie, M.F. and Abdullah, M.F. and Abd Halim, S. and Abu Bakar, A.H. and Chia Kwang, T. (2018) A review on peak load shaving strategies. Renewable and Sustainable Energy Reviews, 82. pp. 3323-3332.

Ullah, H. and Wilfred, C.D. and Shaharun, M.S. (2018) Green synthesis of copper nanoparticle using ionic liquid-based extraction from Polygonum minus and their applications. Environmental Technology (United Kingdom). pp. 1-8.

Ullah, Z. and Khan, A.S. and Muhammad, N. and Ullah, R. and Alqahtani, A.S. and Shah, S.N. and Ghanem, O.B. and Bustam, M.A. and Man, Z. (2018) A review on ionic liquids as perspective catalysts in transesterification of different feedstock oil into biodiesel. Journal of Molecular Liquids, 266. pp. 673-686.

Ullah, Z. and Khan, A.S. and Muhammad, N. and Ullah, R. and Alqahtani, A.S. and Shah, S.N. and Ghanem, O.B. and Bustam, M.A. and Man, Z. (2018) A review on ionic liquids as perspective catalysts in transesterification of different feedstock oil into biodiesel. Journal of Molecular Liquids, 266. pp. 673-686.

Ung, W.C. and Funane, T. and Katura, T. and Sato, H. and Tang, T.B. and Hani, A.F.M. and Kiguchi, M. (2018) Effectiveness Evaluation of Real-Time Scalp Signal Separating Algorithm on Near-Infrared Spectroscopy Neurofeedback. IEEE Journal of Biomedical and Health Informatics, 22 (4). pp. 1148-1156.

Ullah, H. and Wilfred, C.D. and Shaharun, M.S. (2018) Green synthesis of copper nanoparticle using ionic liquid-based extraction from Polygonum minus and their applications. Environmental Technology (United Kingdom). pp. 1-8.

Umar, A.A. and Saaid, I.B.M. and Sulaimon, A.A. and Pilus, R.B.M. (2018) A review of petroleum emulsions and recent progress on water-in-crude oil emulsions stabilized by natural surfactants and solids. Journal of Petroleum Science and Engineering, 165. pp. 673-690.

Ullah, S. and Daud, H. and Dass, S.C. and Hadi, F.-T. and Khalil, A. (2018) An eigenspace approach for detecting multiple space-time disease clusters: Application to measles hotspots detection in khyber-pakhtunkhwa, Pakistan. PLoS ONE, 13 (6).

Ullah, B. and Ovinis, M. and Baharom, M.B. and Ali, S.S.A. and Javaid, M.Y. (2018) Pitch and depth control of underwater glider using LQG and LQR via Kalman filter. International Journal of Vehicle Structures and Systems, 10 (2). pp. 137-141.

Ullah, H. and Azizli, K.A.M. and Man, Z.B. and Ismail, M.B.C. and Rehman, S.U. and Khan, M.I. (2018) Efficient Entrapment of Oxirane Ring Containing Compounds in Thermally Stable Poly(urea-formaldehyde) Polymer Shell Wall. Polymer Science - Series B, 60 (1). pp. 20-34.

Ullah, Z. and Khan, A.S. and Muhammad, N. and Ullah, R. and Alqahtani, A.S. and Shah, S.N. and Ghanem, O.B. and Bustam, M.A. and Man, Z. (2018) A review on ionic liquids as perspective catalysts in transesterification of different feedstock oil into biodiesel. Journal of Molecular Liquids, 266. pp. 673-686.

Ung, W.C. and Funane, T. and Katura, T. and Sato, H. and Tang, T.B. and Hani, A.F.M. and Kiguchi, M. (2018) Effectiveness Evaluation of Real-Time Scalp Signal Separating Algorithm on Near-Infrared Spectroscopy Neurofeedback. IEEE Journal of Biomedical and Health Informatics, 22 (4). pp. 1148-1156.

Ullah, H. and Wilfred, C.D. and Shaharun, M.S. (2018) Green synthesis of copper nanoparticle using ionic liquid-based extraction from Polygonum minus and their applications. Environmental Technology (United Kingdom). pp. 1-8.

Umar, A.A. and Saaid, I.B.M. and Sulaimon, A.A. and Pilus, R.B.M. (2018) A review of petroleum emulsions and recent progress on water-in-crude oil emulsions stabilized by natural surfactants and solids. Journal of Petroleum Science and Engineering, 165. pp. 673-690.

Ullah, S. and Daud, H. and Dass, S.C. and Hadi, F.-T. and Khalil, A. (2018) An eigenspace approach for detecting multiple space-time disease clusters: Application to measles hotspots detection in khyber-pakhtunkhwa, Pakistan. PLoS ONE, 13 (6).

Ullah, H. and Wilfred, C.D. and Shaharun, M.S. (2018) Green synthesis of copper nanoparticle using ionic liquid-based extraction from Polygonum minus and their applications. Environmental Technology (United Kingdom). pp. 1-8.

Ullah, H. and Wilfred, C.D. and Shaharun, M.S. (2018) Green synthesis of copper nanoparticle using ionic liquid-based extraction from Polygonum minus and their applications. Environmental Technology (United Kingdom). pp. 1-8.

Ullah, H. and Wilfred, C.D. and Shaharun, M.S. (2018) Green synthesis of copper nanoparticle using ionic liquid-based extraction from Polygonum minus and their applications. Environmental Technology (United Kingdom). pp. 1-8.

Ullah, Z. and Khan, A.S. and Muhammad, N. and Ullah, R. and Alqahtani, A.S. and Shah, S.N. and Ghanem, O.B. and Bustam, M.A. and Man, Z. (2018) A review on ionic liquids as perspective catalysts in transesterification of different feedstock oil into biodiesel. Journal of Molecular Liquids, 266. pp. 673-686.

V

Vantuch, T. and Zelinka, I. and Vasant, P. (2018) An algorithm for Elliott Waves pattern detection. Intelligent Decision Technologies, 12 (1). pp. 15-24.

Vasant, P. and Kose, U. (2018) Special Issue for COMPSE 2016 - Current Trends in Optimization Technology. Intelligent Decision Technologies, 12 (1). pp. 1-2.

Vasant, P. and Weber, G.-W. and Le, V.T. (2018) Special issue for COMPSE 2016: First EAI international Conference on computer science and Engineering, November 11�12, 2016, Penang, Malaysia. Journal of Ambient Intelligence and Humanized Computing, 9 (3). pp. 739-742.

Venkatraman, V. and Raj, J.J. and Evjen, S. and Lethesh, K.C. and Fiksdahl, A. (2018) In silico prediction and experimental verification of ionic liquid refractive indices. Journal of Molecular Liquids, 264. pp. 563-570.

Vasant, P. and Weber, G.-W. and Le, V.T. (2018) Special issue for COMPSE 2016: First EAI international Conference on computer science and Engineering, November 11�12, 2016, Penang, Malaysia. Journal of Ambient Intelligence and Humanized Computing, 9 (3). pp. 739-742.

Vantuch, T. and Zelinka, I. and Vasant, P. (2018) An algorithm for Elliott Waves pattern detection. Intelligent Decision Technologies, 12 (1). pp. 15-24.

Vasant, P. and Kose, U. (2018) Special Issue for COMPSE 2016 - Current Trends in Optimization Technology. Intelligent Decision Technologies, 12 (1). pp. 1-2.

Venkatraman, V. and Raj, J.J. and Evjen, S. and Lethesh, K.C. and Fiksdahl, A. (2018) In silico prediction and experimental verification of ionic liquid refractive indices. Journal of Molecular Liquids, 264. pp. 563-570.

W

Wannahari, R and Sannasi, P and M Nordin, MF and Mukhtar, H (2018) Sugarcane bagasse derived nano magnetic adsorbent composite (SCB-NMAC) for removal of Cu2+ from aqueous solution. ARPN Journal of Engineering and Applied Sciences, 13 (1). pp. 1-9.

Wasiu, Saheed and Aziz, Rashid Abdul and Akmal, Hanif (2018) Effects of Pressure Boost on the Performance Characteristics of the Direct Injection Spark Ignition Engine Fuelled by Gasoline at Various Throttle Positions. International Journal of Applied Engineering Research, 13 (1). pp. 691-696.

Wasiu, Saheed and Aziz, Rashid Abdul and Megat, Puteri (2018) Brake specific energy consumption (BSEC) and emission characteristics of the direct injection spark ignition engine fuelled by hydrogen enriched compressed natural gas at various air-fuel ratios. International Journal of Applied Engineering Research, 13 (1). pp. 677-683.

Wasiu, Saheed and Aziz, Rashid Abdul and Atrash, Fariddil (2018) Performance Characteristics of the Direct Injection Compression Ignition Engine Fuelled by Water in Diesel Emulsion (Wide). International Journal of Applied Engineering Research, 13 (1). pp. 673-676.

Wasiu, Saheed and Aziz, Rashid Abdul and Faiz, Khairul (2018) Effects of actual exhaust gas recirculation of the direct injection spark ignition engine fuelled by compressed natural gas at partial injection timing. International Journal of Applied Engineering Research, 13 (1). pp. 707-713.

Wasiu, Saheed and Aziz, Rashid Abdul and Ghozali, Muazam (2018) Engine performance characteristics fuelled by in-situ mixing of small amount of hydrogen and compressed natural gas at various relative air-fuel ratios. International Journal of Applied Engineering Research, 13 (1). pp. 714-19.

Woldemichael, D.E. (2018) Enhancing active learning in large classes using web clicker. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 111-120.

Watada, J. and Zhang, H. and Melo, H. and Sun, D. and Vasant, P. (2018) Boosted HOG features and its application on object movement detection. Smart Innovation, Systems and Technologies, 81. pp. 340-348.

Watada, J. and Zhang, H. and Melo, H. and Wang, J. and Vasant, P. (2018) SURF algorithm-based panoramic image mosaic application. Smart Innovation, Systems and Technologies, 81. pp. 349-358.

Watada, J. and Tan, S.C. and Matsumoto, Y. and Vasant, P. (2018) Rough set-based text mining from a large data repository of experts� diagnoses for power systems. Smart Innovation, Systems and Technologies, 73. pp. 136-144.

Wannahari, R. and Sannasi, P. and Nordin, M.F.M. and Mukhtar, H. (2018) Sugarcane bagasse derived nano magnetic adsorbent composite (SCB-NMAC) for removal of Cu2+ from aqueous solution. ARPN Journal of Engineering and Applied Sciences, 13 (1). pp. 1-9.

Wang, B. and Li, Y. and Wang, S. and Watada, J. (2018) A multi-objective portfolio selection model with fuzzy Value-at-Risk ratio. IEEE Transactions on Fuzzy Systems.

Wan, R. and Renganathan, S. and Kral, I. (2018) Tekná�a vanishing oral tradition among the Kayan people of Sarawak, Malaysian Borneo. Indonesia and the Malay World, 46 (135). pp. 218-234.

Weber, G.-W. and Vasant, P. and Marmolejo Saucedo, J.A. (2018) Computer science and engineering. Journal of Computational Science, 25. pp. 416-418.

Wong, L.-P. and Isa, M.H. and Bashir, M.J.K. and Yaqub, A. (2018) Low frequency ultrasound treatment of palm oil mill effluent for solubilization of organic matter. Desalination and Water Treatment, 108. pp. 164-170.

Waheed, M. and Ahmad, R. and Ahmed, W. and Drieberg, M. and Alam, M.M. (2018) Towards efficient wireless body area network using two-way relay cooperation. Sensors (Switzerland), 18 (2).

Woen, E.L. and Malek, M.A. and Mohammed, B.S. and Chao-Wei, T. and Tamunif, M.T. (2018) Experimental study on compressive strength of sediment brick masonry. AIP Conference Proceedings, 1930.

Wong, L.-P. and Isa, M.H. and Bashir, M.J.K. (2018) Disintegration of palm oil mill effluent organic solids by ultrasonication: Optimization by response surface methodology. Process Safety and Environmental Protection, 114. pp. 123-132.

Wang, B. and Li, Y. and Wang, S. and Watada, J. (2018) A multi-objective portfolio selection model with fuzzy Value-at-Risk ratio. IEEE Transactions on Fuzzy Systems.

Wan, R. and Renganathan, S. and Kral, I. (2018) Tekná�a vanishing oral tradition among the Kayan people of Sarawak, Malaysian Borneo. Indonesia and the Malay World, 46 (135). pp. 218-234.

Weber, G.-W. and Vasant, P. and Marmolejo Saucedo, J.A. (2018) Computer science and engineering. Journal of Computational Science, 25. pp. 416-418.

Woldemichael, D.E. (2018) Enhancing active learning in large classes using web clicker. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 111-120.

Watada, J. and Zhang, H. and Melo, H. and Sun, D. and Vasant, P. (2018) Boosted HOG features and its application on object movement detection. Smart Innovation, Systems and Technologies, 81. pp. 340-348.

Watada, J. and Zhang, H. and Melo, H. and Wang, J. and Vasant, P. (2018) SURF algorithm-based panoramic image mosaic application. Smart Innovation, Systems and Technologies, 81. pp. 349-358.

Watada, J. and Tan, S.C. and Matsumoto, Y. and Vasant, P. (2018) Rough set-based text mining from a large data repository of experts� diagnoses for power systems. Smart Innovation, Systems and Technologies, 73. pp. 136-144.

Wannahari, R. and Sannasi, P. and Nordin, M.F.M. and Mukhtar, H. (2018) Sugarcane bagasse derived nano magnetic adsorbent composite (SCB-NMAC) for removal of Cu2+ from aqueous solution. ARPN Journal of Engineering and Applied Sciences, 13 (1). pp. 1-9.

X

Xin, O.W. and Zuo, L. and Iida, H. and Aziz, N. (2018) Gamification Effect of Loyalty Program and Its Assessment Using Game Refinement Measure: Case Study on Starbucks. Lecture Notes in Electrical Engineering, 488. pp. 161-171.

Xia, L. and Malik, A.S. and Subhani, A.R. (2018) A physiological signal-based method for early mental-stress detection. Biomedical Signal Processing and Control, 46. pp. 18-32.

Xin, O.W. and Zuo, L. and Iida, H. and Aziz, N. (2018) Gamification Effect of Loyalty Program and Its Assessment Using Game Refinement Measure: Case Study on Starbucks. Lecture Notes in Electrical Engineering, 488. pp. 161-171.

Xia, L. and Malik, A.S. and Subhani, A.R. (2018) A physiological signal-based method for early mental-stress detection. Biomedical Signal Processing and Control, 46. pp. 18-32.

Y

Yew, Kwang Hooi and Hassan, M Fadzil and Shariff, M Azmi (2018) Model-driven Elicitation of Ontology Pragmatics for Evolving Critical System.

Yaqub, Sana and Lal, Bhajan and Partoon, Behzad and Mellon, Nurhayati Bt (2018) Investigation of the task oriented dual function inhibitors in gas hydrate inhibition: A review. Fluid Phase Equilibria, 477. pp. 40-57.

Yekeen, N. and Padmanabhan, E. and Idris, A.K. (2018) A review of recent advances in foam-based fracturing fluid application in unconventional reservoirs. Journal of Industrial and Engineering Chemistry.

Yahya, N. (2018) Gas adsorption and urea formation using magnetically induced environment. Green Energy and Technology (978981). pp. 23-60.

Yahya, N. (2018) Agricultural 4.0: Its implementation toward future sustainability. Green Energy and Technology (978981). pp. 125-145.

Yahya, N. (2018) Urea fertilizer: The global challenges and their impact to our sustainability. Green Energy and Technology (978981). pp. 1-21.

Yahya, N. (2018) Efficacy of green urea for sustainable agriculture. Green Energy and Technology (978981). pp. 99-123.

Yahya, N. (2018) Reactor design for novel green urea synthesis. Green Energy and Technology (978981). pp. 61-98.

Yong, Z.J. and Bashir, M.J.K. and Ng, C.A. and Sethupathi, S. and Lim, J.-W. (2018) A sequential treatment of intermediate tropical landfill leachate using a sequencing batch reactor (SBR) and coagulation. Journal of Environmental Management, 205. pp. 244-252.

Yusoff, N.H.N. and Mamat, O. and Isa, M.C. and Amir, N. (2018) Optimisation of electrodeposition parameters on the mechanical properties of nickel cobalt coated mild steel. Defence S and T Technical Bulletin, 11 (1). pp. 57-65.

Yusoff, A.A. and Abdullah, M.R.T.L. and Endut, M.N.A.-A. and Aziz, E.A. and Talib, A.T. (2018) Indicators for Socio-Religious Harmony Index (SRHI) instrument for Malaysia: Findings of FDM expert panel. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 55-72.

Yuan, L.X. and Tan, S.C. and Goh, P.Y. and Lim, C.P. and Watada, J. (2018) Fuzzy ARTMAP with binary relevance for multi-label classification. Smart Innovation, Systems and Technologies, 73. pp. 127-135.

Yekeen, N. and Manan, M.A. and Idris, A.K. and Samin, A.M. and Risal, A.R. (2018) Mechanistic study of nanoparticles�surfactant foam flow in etched glass micro-models. Journal of Dispersion Science and Technology, 39 (5). pp. 623-633.

Yiin, C.L. and Yusup, S. and Quitain, A.T. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Thermogravimetric analysis and kinetic modeling of low-transition-temperature mixtures pretreated oil palm empty fruit bunch for possible maximum yield of pyrolysis oil. Bioresource Technology, 255. pp. 189-197.

Yusof, N.Z. and Samsuddin, N.S. and Hanif, M.F. and Syed Osman, S.B. (2018) Peat soils stabilization using Effective Microorganisms (EM). IOP Conference Series: Earth and Environmental Science, 140 (1).

Yavari, S. and Malakahmad, A. and Sapari, N.B. and Yavari, S. (2018) Fullerene C60 for enhancing phytoremediation of urea plant wastewater by timber plants. Environmental Science and Pollution Research, 25 (12). pp. 11351-11363.

Yaro, A.S. and Sha�Ameri, A.Z. and Kamel, N. (2018) Position estimation comparison of a 3-D linear lateration algorithm with a reference selection technique. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1). pp. 207-213.

Yin, C.J. and Murad, S.A.Z. and Harun, A. and Ramli, M.M. and Zulkifli, T.Z.A. and Karim, J. (2018) A Low Power 2.4 GHz CMOS Mixer Using Forward Body Bias Technique for Wireless Sensor Network. IOP Conference Series: Materials Science and Engineering, 318 (1).

Yavari, S. and Malakahmad, A. and Sapari, N.B. and Yavari, S. (2018) Nutrients balance for improvement of phytoremediation ability of teak seedlings (Tectona grandis). Journal of Plant Nutrition, 41 (5). pp. 545-551.

Ya, H.H. and Luthfi, H. and Ngo, N.-T. and Hassan, S. and Pao, W. (2018) A Preliminary Experimental Investigation of Wet Fine Erosion in Two-Phase Flow. IOP Conference Series: Materials Science and Engineering, 328 (1).

Yaro, A.S. and Sha�Ameri, A.Z. and Kamel, N. (2018) Position estimation error performance model for a minimum configuration 3-D multilateration. International Journal on Electrical Engineering and Informatics, 10 (1). pp. 153-169.

Yi, T.T. and Habte, A.D. (2018) Pressure transient behaviour of a horizontal steam injection well in a naturally fractured reservoir. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 1071-1079.

Yusoff, N.H.N. and Mamat, O. and Isa, M.C. and Amir, N. (2018) Optimisation of electrodeposition parameters on the mechanical properties of nickel cobalt coated mild steel. Defence S and T Technical Bulletin, 11 (1). pp. 57-65.

Ya, H.H. and Luthfi, H. and Ngo, N.-T. and Hassan, S. and Pao, W. (2018) A Preliminary Experimental Investigation of Wet Fine Erosion in Two-Phase Flow. IOP Conference Series: Materials Science and Engineering, 328 (1).

Yeganeh Ghotbi, M. and Javanmard, A. and Soleimani, H. (2018) Three dimensional metal/N-doped nanoplate carbon catalysts for oxygen reduction, the reason for using a layered nanoreactor. Scientific Reports, 8 (1).

Yahya, N. and Rehman, Z.U. and Shafie, A. and Alqasem, B. and Soleimani, H. and Irfan, M. and Qureshi, S. (2018) MWCNT for ambient urea synthesis. Physica B: Condensed Matter, 545. pp. 358-369.

Yasir, M. and Amir, N. and Ahmad, F. and Ullah, S. and Jimenez, M. (2018) Effect of basalt fibers dispersion on steel fire protection performance of epoxy-based intumescent coatings. Progress in Organic Coatings, 122. pp. 229-238.

Yiin, C.L. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Sustainable green pretreatment approach to biomass-to-energy conversion using natural hydro-low-transition-temperature mixtures. Bioresource Technology, 261. pp. 361-369.

Yousufi, M.M. and Elhaj, M.E.M. and Moniruzzaman, M. (2018) Comparative Analysis of Corrosion Inhibition: Between Jatrophacurcas, Palm and Diesel Oil based Emulsified Acids for Acid Stimulation Operations. IOP Conference Series: Earth and Environmental Science, 164 (1).

Yekeen, N. and Manan, M.A. and Idris, A.K. and Samin, A.M. and Risal, A.R. (2018) Mechanistic study of nanoparticles�surfactant foam flow in etched glass micro-models. Journal of Dispersion Science and Technology, 39 (5). pp. 623-633.

Yiin, C.L. and Yusup, S. and Quitain, A.T. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Thermogravimetric analysis and kinetic modeling of low-transition-temperature mixtures pretreated oil palm empty fruit bunch for possible maximum yield of pyrolysis oil. Bioresource Technology, 255. pp. 189-197.

Yekeen, N. and Padmanabhan, E. and Idris, A.K. (2018) A review of recent advances in foam-based fracturing fluid application in unconventional reservoirs. Journal of Industrial and Engineering Chemistry.

Yahya, N. (2018) Gas adsorption and urea formation using magnetically induced environment. Green Energy and Technology (978981). pp. 23-60.

Yahya, N. (2018) Agricultural 4.0: Its implementation toward future sustainability. Green Energy and Technology (978981). pp. 125-145.

Yahya, N. (2018) Urea fertilizer: The global challenges and their impact to our sustainability. Green Energy and Technology (978981). pp. 1-21.

Yahya, N. (2018) Efficacy of green urea for sustainable agriculture. Green Energy and Technology (978981). pp. 99-123.

Yahya, N. (2018) Reactor design for novel green urea synthesis. Green Energy and Technology (978981). pp. 61-98.

Yong, Z.J. and Bashir, M.J.K. and Ng, C.A. and Sethupathi, S. and Lim, J.-W. (2018) A sequential treatment of intermediate tropical landfill leachate using a sequencing batch reactor (SBR) and coagulation. Journal of Environmental Management, 205. pp. 244-252.

Yusoff, N.H.N. and Mamat, O. and Isa, M.C. and Amir, N. (2018) Optimisation of electrodeposition parameters on the mechanical properties of nickel cobalt coated mild steel. Defence S and T Technical Bulletin, 11 (1). pp. 57-65.

Yusoff, A.A. and Abdullah, M.R.T.L. and Endut, M.N.A.-A. and Aziz, E.A. and Talib, A.T. (2018) Indicators for Socio-Religious Harmony Index (SRHI) instrument for Malaysia: Findings of FDM expert panel. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 55-72.

Yuan, L.X. and Tan, S.C. and Goh, P.Y. and Lim, C.P. and Watada, J. (2018) Fuzzy ARTMAP with binary relevance for multi-label classification. Smart Innovation, Systems and Technologies, 73. pp. 127-135.

Yeganeh Ghotbi, M. and Javanmard, A. and Soleimani, H. (2018) Three dimensional metal/N-doped nanoplate carbon catalysts for oxygen reduction, the reason for using a layered nanoreactor. Scientific Reports, 8 (1).

Yahya, N. and Rehman, Z.U. and Shafie, A. and Alqasem, B. and Soleimani, H. and Irfan, M. and Qureshi, S. (2018) MWCNT for ambient urea synthesis. Physica B: Condensed Matter, 545. pp. 358-369.

Yasir, M. and Amir, N. and Ahmad, F. and Ullah, S. and Jimenez, M. (2018) Effect of basalt fibers dispersion on steel fire protection performance of epoxy-based intumescent coatings. Progress in Organic Coatings, 122. pp. 229-238.

Yiin, C.L. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Sustainable green pretreatment approach to biomass-to-energy conversion using natural hydro-low-transition-temperature mixtures. Bioresource Technology, 261. pp. 361-369.

Yousufi, M.M. and Elhaj, M.E.M. and Moniruzzaman, M. (2018) Comparative Analysis of Corrosion Inhibition: Between Jatrophacurcas, Palm and Diesel Oil based Emulsified Acids for Acid Stimulation Operations. IOP Conference Series: Earth and Environmental Science, 164 (1).

Yusoff, A.A. and Abdullah, M.R.T.L. and Endut, M.N.A.-A. and Aziz, E.A. and Talib, A.T. (2018) Indicators for Socio-Religious Harmony Index (SRHI) instrument for Malaysia: Findings of FDM expert panel. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 55-72.

Yenugu, Veera Manohara Reddy and Ambavaram, Vijaya Bhaskar Reddy and Moniruzzaman, Muhammad and Madhavi, Gajulapalle (2018) A simple, sensitive, and straightforward LC--MS approach for rapid analysis of three potential genotoxic impurities in rabeprazole formulations. Journal of separation science, 41 (21). pp. 3966-3973.

Z

Zabiri, Haslinda and Marappagounder, Ramasamy and Ramli, Nasser M (2018) Parallel based support vector regression for empirical modeling of nonlinear chemical process systems. Sains Malaysiana, 47 (3). pp. 635-643.

Zahari, SHN and Rusli, R and Buang, A and Mohanan, K (2018) Minimum ignition energy of aluminium nanopowders as engineered nanomaterials (ENMs). International Journal of Automotive and Mechanical Engineering, 15 (2).

Zulfiqar, Muhammad and Chowdhury, Sujan and Sufian, Suriati and Omar, Abdul Aziz (2018) Enhanced photocatalytic activity of Orange II in aqueous solution using solvent-based TiO2 nanotubes: kinetic, equilibrium and thermodynamic studies. Journal of cleaner production, 203. pp. 848-859.

Zabiri, Haslinda and Marappagounder, Ramasamy and Lemma, Tufa Dendena (2018) A Study on the Closed-Loop Performance in Extrapolated Regions of Operations of Nonlinear Systems Using Parallel OBF-NN Models. Journal of Chemical Engineering of Japan, 49 (2). pp. 176-185.

Zahari, M.K. and Ahmad, B.H. and Wong, P.W. and Shairi, N.A. (2018) Switchable bandstop to bandpass filter using parallel-coupled resonator. Asia-Pacific Microwave Conference Proceedings, APMC. pp. 513-516.

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Shahid, M.U. (2018) Effect of paste viscosity on direct-current resistance in improving the efficiency of dye-sensitized solar cell. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 73-78.

Zhang, H. and Watada, J. (2018) Building fuzzy variance gamma option pricing models with jump levy process. Smart Innovation, Systems and Technologies, 73. pp. 105-116.

Zaffar, M. and Savita, K.S. and Hashmani, M.A. and Rizvi, S.S.H. (2018) A study of feature selection algorithms for predicting students academic performance. International Journal of Advanced Computer Science and Applications, 9 (5). pp. 541-549.

Zahari, M.H.B. and Guan, B.H. and Meng, C.E. (2018) Development and evaluation of BaFe12 O19-PANI-MWCNT composite for electromagnetic interference (EMI) shielding. Progress In Electromagnetics Research C, 80. pp. 55-64.

Zamin, N. and Khairuddin, F.A. and Rambli, D.R.A. and Ibrahim, E.N.M. and Soobni, M.S.A. (2018) Building empathy in young children using augmented reality. International Journal of Engineering and Technology(UAE), 7 (2). pp. 191-192.

Zakeri, M. and Abouzari-Lotf, E. and Nasef, M.M. and Ahmad, A. and Ripin, A. and Ting, T.M. and Sithambaranathan, P. (2018) Preparation and characterization of highly stable protic-ionic-liquid membranes. International Journal of Hydrogen Energy.

Zakeri, M. and Abouzari-Lotf, E. and Nasef, M.M. and Ahmad, A. and Miyake, M. and Ting, T.M. and Sithambaranathan, P. (2018) Fabrication and characterization of supported dual acidic ionic liquids for polymer electrolyte membrane fuel cell applications. Arabian Journal of Chemistry.

Zulkepli, S.N.I.S. and Hamid, N.H. and Shukla, V. (2018) Droplet velocity measurement based on dielectric layer thickness variation using digital microfluidic devices. Biosensors, 8 (2).

Zahari, N.Z. and Hashim, A.M. (2018) Adequacy of Flood Relief Shelters: A Case Study in Perak, Malaysia. E3S Web of Conferences, 34.

Zaharin, H.A. and Abdul Rani, A.M. and Ginta, T.L. and Azam, F.I. (2018) Additive Manufacturing Technology for Biomedical Components: A review. IOP Conference Series: Materials Science and Engineering, 328 (1).

Zahid, M.S.M. and Isyaku, B. and Fadzil, F.A. (2018) Recovery of software defined network from multiple failures: Openstate vs openflow. Proceedings of IEEE/ACS International Conference on Computer Systems and Applications, AICCSA, 2017-O. pp. 1178-1183.

Zabiri, H. and Marappagounder, R. and Ramli, N.M. (2018) Parallel based support vector regression for empirical modeling of nonlinear chemical process systems. Sains Malaysiana, 47 (3). pp. 635-643.

Zelinka, I. and Tomaszek, L. and Vasant, P. and Dao, T.T. and Hoang, D.V. (2018) A novel approach on evolutionary dynamics analysis � A progress report. Journal of Computational Science, 25. pp. 437-445.

Zaidi, K.S. and Jeoti, V. and Drieberg, M. and Awang, A. and Iqbal, A. (2018) Fading Characteristics in Evaporation Duct: Fade Margin for a Wireless Link in the South China Sea. IEEE Access, 6. pp. 11038-11045.

Zubir, W.M.A.M. and Aziz, I.A. and Jaafar, J. (2018) A survey on textual semantic classification algorithms. 2017 IEEE Conference on Big Data and Analytics, ICBDA 2017, 2018-J. pp. 1-6.

Zaffar, M. and Hashmani, M.A. and Savita, K.S. (2018) Performance analysis of feature selection algorithm for educational data mining. 2017 IEEE Conference on Big Data and Analytics, ICBDA 2017, 2018-J. pp. 7-12.

Zulkifli, T.Z.A. and Marzuki, A. and Murad, S.A.Z. (2018) UWB CMOS low noise amplifier for mode 1. Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics, 2017-O. pp. 117-120.

Zabiri, H. and Marappagounder, R. and Ramli, N.M. (2018) Parallel based support vector regression for empirical modeling of nonlinear chemical process systems. Sains Malaysiana, 47 (3). pp. 635-643.

Zainal Abidin, M. and Rusli, R. and Khan, F. and Mohd Shariff, A. (2018) Development of inherent safety benefits index to analyse the impact of inherent safety implementation. Process Safety and Environmental Protection, 117. pp. 454-472.

Zahid, M. and Shafiq, N. and Isa, M.H. and Gil, L. (2018) Statistical modeling and mix design optimization of fly ash based engineered geopolymer composite using response surface methodology. Journal of Cleaner Production, 194. pp. 483-498.

Zahid, M. and Shafiq, N. and Jalal, A. (2018) Investigating the effects of solarcure curing method on the compressive strength, microstructure and polymeric reaction of fly ash based geopolymer. Construction and Building Materials, 181. pp. 227-237.

Zhang, H. and Watada, J. (2018) Fuzzy Levy-GJR-GARCH American option pricing model based on an infinite pure jump process. IEICE Transactions on Information and Systems, E101D (7). pp. 1843-1859.

Zainal Abidin, M. and Rusli, R. and Khan, F. and Mohd Shariff, A. (2018) Development of inherent safety benefits index to analyse the impact of inherent safety implementation. Process Safety and Environmental Protection, 117. pp. 454-472.

Zulfiqar, M. and Chowdhury, S. and Omar, A.A. (2018) Hydrothermal synthesis of multiwalled TiO2 nanotubes and its photocatalytic activities for Orange II removal. Separation Science and Technology (Philadelphia), 53 (9). pp. 1412-1422.

Zafar, R. and Kamel, N. and Naufal, M. and Malik, A.S. and Dass, S.C. and Ahmad, R.F. and Abdullah, J.M. and Reza, F. (2018) A study of decoding human brain activities from simultaneous data of EEG and fMRI using MVPA. Australasian Physical and Engineering Sciences in Medicine. pp. 1-13.

Zamani, A. and Bataee, M. and Hamdi, Z. and Khazforoush, F. (2018) Application of smart nano-WBM material for filtrate loss recovery in wellbores with tight spots problem: an empirical study. Journal of Petroleum Exploration and Production Technology. pp. 1-6.

Zulkepli, S.N.I.S. and Hamid, N.H. and Shukla, V. (2018) Droplet velocity measurement based on dielectric layer thickness variation using digital microfluidic devices. Biosensors, 8 (2).

Zelinka, I. and Tomaszek, L. and Vasant, P. and Dao, T.T. and Hoang, D.V. (2018) A novel approach on evolutionary dynamics analysis � A progress report. Journal of Computational Science, 25. pp. 437-445.

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Shahid, M.U. (2018) Effect of paste viscosity on direct-current resistance in improving the efficiency of dye-sensitized solar cell. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 73-78.

Zhang, H. and Watada, J. (2018) Building fuzzy variance gamma option pricing models with jump levy process. Smart Innovation, Systems and Technologies, 73. pp. 105-116.

Zaffar, M. and Savita, K.S. and Hashmani, M.A. and Rizvi, S.S.H. (2018) A study of feature selection algorithms for predicting students academic performance. International Journal of Advanced Computer Science and Applications, 9 (5). pp. 541-549.

Zahari, M.H.B. and Guan, B.H. and Meng, C.E. (2018) Development and evaluation of BaFe12 O19-PANI-MWCNT composite for electromagnetic interference (EMI) shielding. Progress In Electromagnetics Research C, 80. pp. 55-64.

Zamin, N. and Khairuddin, F.A. and Rambli, D.R.A. and Ibrahim, E.N.M. and Soobni, M.S.A. (2018) Building empathy in young children using augmented reality. International Journal of Engineering and Technology(UAE), 7 (2). pp. 191-192.

Zakeri, M. and Abouzari-Lotf, E. and Nasef, M.M. and Ahmad, A. and Ripin, A. and Ting, T.M. and Sithambaranathan, P. (2018) Preparation and characterization of highly stable protic-ionic-liquid membranes. International Journal of Hydrogen Energy.

Zakeri, M. and Abouzari-Lotf, E. and Nasef, M.M. and Ahmad, A. and Miyake, M. and Ting, T.M. and Sithambaranathan, P. (2018) Fabrication and characterization of supported dual acidic ionic liquids for polymer electrolyte membrane fuel cell applications. Arabian Journal of Chemistry.

Zahid, M. and Shafiq, N. and Isa, M.H. and Gil, L. (2018) Statistical modeling and mix design optimization of fly ash based engineered geopolymer composite using response surface methodology. Journal of Cleaner Production, 194. pp. 483-498.

Zahid, M. and Shafiq, N. and Jalal, A. (2018) Investigating the effects of solarcure curing method on the compressive strength, microstructure and polymeric reaction of fly ash based geopolymer. Construction and Building Materials, 181. pp. 227-237.

Zhang, H. and Watada, J. (2018) Fuzzy Levy-GJR-GARCH American option pricing model based on an infinite pure jump process. IEICE Transactions on Information and Systems, E101D (7). pp. 1843-1859.

Zainal Abidin, M. and Rusli, R. and Khan, F. and Mohd Shariff, A. (2018) Development of inherent safety benefits index to analyse the impact of inherent safety implementation. Process Safety and Environmental Protection, 117. pp. 454-472.

Zulfiqar, M. and Chowdhury, S. and Omar, A.A. (2018) Hydrothermal synthesis of multiwalled TiO2 nanotubes and its photocatalytic activities for Orange II removal. Separation Science and Technology (Philadelphia), 53 (9). pp. 1412-1422.

Zafar, R. and Kamel, N. and Naufal, M. and Malik, A.S. and Dass, S.C. and Ahmad, R.F. and Abdullah, J.M. and Reza, F. (2018) A study of decoding human brain activities from simultaneous data of EEG and fMRI using MVPA. Australasian Physical and Engineering Sciences in Medicine. pp. 1-13.

Zamani, A. and Bataee, M. and Hamdi, Z. and Khazforoush, F. (2018) Application of smart nano-WBM material for filtrate loss recovery in wellbores with tight spots problem: an empirical study. Journal of Petroleum Exploration and Production Technology. pp. 1-6.

Zainal Abidin, M. and Rusli, R. and Khan, F. and Mohd Shariff, A. (2018) Development of inherent safety benefits index to analyse the impact of inherent safety implementation. Process Safety and Environmental Protection, 117. pp. 454-472.

This list was generated on Sat Mar 2 21:44:23 2024 +08.