Logo

Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y | Z
Number of items at this level: 692.

A. Majid, M. Amin and Mohd Hashim, Fakhruldin (2004) Customized Product Development, Fulfilling Aesthetic Requirements Under Stringent Safety Standards. In: International Conference on Product Design and Development (ICPDD 2004), Dec 2004., Kota Kinabalu.

Al-Kayiem, Hussain H. and Al-Taie, Arkan K. and Wong, Wee T. (2013) Analysis on gas turbine blade cooling by compressed air channels using CFD simulation. Asian Journal of Scientific Research , 6 (3). pp. 467-477. ISSN 19921454

Ettehadi Osgouei, Reza and Ozbayoglu, Evren and Ozbayoglu , Murat (2012) A Mechanistic Model to Characterize the Two Phase Drilling Fluid Flow through Inclined Eccentric Annular Geometry. In: SPE Oil and Gas India Conference and Exhibitionheld in Mumbai, India, 28–30March 2012., 28–30March 2012., Mumbai, India.

Ismaeel, Ali A. and Al-Kayeim, Hussain H. and Baheta, Aklilu T. (2016) Comparative Critique of Thermal Energy storage Technique in Solar Chimney Power Plant. International Energy Journal .

KHALAJI ASSADI, M (2014) THERMODYNAMIC ASSESSMENT OF A HYBRID SOFC/GT CYCLE CONSIDERING OXY-ANODE COMBUSTION CO2 CAPTURE TECHNOLOGY. Indian J.Sci.Res.3 (1): 148-172, 2014, 1 (3). pp. 148-172. ISSN ISSN : 0976-2876 (Print), ISSN : 2250-0138 (Online)

Khalaji Asadi , M (2005) Computer simulation of the optical properties of high-temperature cermet solar selective coatings. Solar Energy, 78 . pp. 235-241.

Khalaji Assadi, M (2011) Analytical model of atrium for heating and ventilating an institutional building naturally. Energy and Buildings, 43 . pp. 2595-2601.

Khalaji Assadi, M (2009) Design for Optimum Utilization of Integrated Energy Systems with Application to Rural Areas. ISESCO Science and Technology Vision, 5 (8). pp. 18-25.

Khalaji Assadi, M and Gilani, S. I and Jun Yen, T. C (2016) DESIGN a solar hybrid air conditioning compressor system. MATEC Web of Conferences, 38 .

Khalaji Assadi, Morteza (2010) DESIGNING OF SOLAR WATER BATH HEATER FOR GAS PRESSURE REDUCING STATION IN OF 150,000 Nm3/h CAPACITY IN ASSALUYEH REGION IN IRAN. Proceedings of ASME 2010 4th International Conference on Energy Sustainability .

Khalaji Assadi, Morteza (2013) Energy Demand Model of the Household Sector and Its Application in Developing Metropolitan Cities( Case Study: Tehran). Pol.J.Environ.Stud, 22 (2). pp. 319-329.

Khalaji Assadi, Morteza (2011) Integration of reverse osmosis and refrigeration systems for energy efficient seawater desalination. International Journal of the Physical Sciences, Vol. 6 (12). pp. 2832-2843. ISSN 1992 - 1950 ©2011 Academic Journals

Khalaji Assadi, Morteza (2011) Performance Analysis of a Hybrid Solar Energy Storage System. Journal of Mechanics, 27 (2). N19-N23.

Khalaji Assadi , Morteza and Mohammadi, Ali (2016) Simulation of dynamical performance of solar desiccant cooling cycle. Applied Mechanics and Materials, 819 . pp. 160-170. ISSN 1662-7482

Khalajiassadi, Morteza (2013) Integrated dynamic modeling for energy optimization in the building: Part 1:The development of the model. Journal of Building Physic, 37 (1). pp. 28-54.

Mohyaldinn, Mysara Eissa and Hamzah, Razali and Che Ismail, Mokhtar (2009) Prediction of Sand Erosion in Elbows and Tees Using Direct Impingement Model. In: NACE Asia Pacific Conference, 21-23 Nov 2009, Kuala Lumpur.

A

A Aziz, A Rashid and Firmansyah, Firmansyah and Raja Shahzad, Raja Shahzad (2010) Combustion Analysis of a CNG Direct Injection Spark Ignition Engine. [Citation Index Journal]

A Majid, M Amin and Sulaiman, S. A. and Ibrahim, Idris and Baharudin , Z. (2012) Causal Model for Peak and Off Peak Waste Heat Recovery for Chilled Water Production. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

A Majid, M Amin and Sulaiman, S. A. and Ibrahim, Idris and Baharudin , Z. (2012) Causal Model for Peak and Off Peak Waste Heat Recovery for Chilled Water Production. [Citation Index Journal]

A Majid, M Amin and Sulaiman, S. A. and Mokhtar, Hamdan and Tamiru, A. L. (2013) Operating Point Estimation for an Absorption Process using Data Clustering Technique. Journal of Applied Sciences, 13 . pp. 377-384. ISSN 18125654

A Majid, Mohd Amin and Muhammad, Masdi and Nur IllaniYen@Yem,, Nur IllaniYen@Yem, (2010) RCM Analysis of Process Equipment: A Case Study on Heat Exchanger. [Citation Index Journal]

A. Majid, M. Amin and Zainuddin, A. and Tamiru, A. L. (2012) Historical Data based Models for Chilled Water Production from Waste Heat of Turbine. In: 2012 The 3rd International Conference on Production, Energy and Reliability (ICPER2012), 12-14 June 2012, Kuala Lumpur Convention Center .

A.L., Tamiru and M. Hashim, Fakhruldin (2011) Application of Bat Algorithm and Fuzzy Systems to Model Exergy Changes in a Gas Turbine. In: Artificial Intelligence, Evolutionary Computation and Metaheuristics (AIECM). Springer. (Submitted)

A.L., Tamiru and M. Hashim, Fakhruldin (2011) Fuzzy and LOLIMOT based Model Identification for the Steam and Cooling sections of a Cogeneration and District Cooling Plant. Journal of Applied Sciences . (Submitted)

A.L., Tamiru and M. Hashim, Fakhruldin (2011) A Hybrid Approach to Fault Detection and Diagnosis in an Industrial Gas Turbine. In: Computational Intelligence in Multi-Agent Systems: Theory and Practice. IGI Global. (Submitted)

A.L. , Tamiru and M. Hashim, Fakhruldin (2011) A Critical Review on Fault Detection and Diagnosis Systems related to Cogeneration and Cooling Plants. In: Computational Intelligence in Multi-Agent Systems: Theory and Practice. IGI Global. (Submitted)

ASSADI, M.KH (2011) Using a developed PM in order to optimize the production productivity in a cement industry. J. Appl. Sci. Environ. Manage, 15 (2). pp. 381-389. ISSN JASEM ISSN 1119-8362

Abd Majid, Mohd Amin and A.Sulaiman, Shaharin and Ibrahim, Idris and Baharddin, Zuhairi (2012) CAUSAL MODEL FOR PEAK AND OFF PEAK WASTE HEAT RECOVERY FOR CHILLED WATER PRODUCTION. In: 2012 The 3rd International Conference on Production, Energy and Reliability (ICPER2012), Kuala Lumpur Convention Center.

Abd Majid, Mohd Amin and Nasir Rashid, Meseret (2011) Multi-state System Availability Model of Electricity Generation for a Cogeneration District Cooling Plant. [Citation Index Journal]

Abd Majid, Mohd Amin and Nasir Rashid, Meseret and Waluyo, Joko (2012) Operation and Performance of a Thermal Energy Storage System: A Case Study of Campus Cooling using Co-generation Plant. Energy Procedia, 14 . pp. 1280-1285. ISSN 1876-6102

Abd Majid, Mohd Amin and Nordin, Adzuieen (2013) ASSIGNMENT MODEL FOR CHARGING OF THERMAL ENERGY STORAGE BY ELECTRIC CHILLERS USING ZERO-ONE PROGRAMMING APPROACH. [Citation Index Journal]

Abd Majid, Mohd Amin and Sulaiman, S. A. and Fujii, Tatsuo and Naono, Naono (2014) Studies on Steam Absorption Chillers Performance at a Cogeneration Plant. MATEC Web of Conference 13, 05003 (2014) .

Abd Majid, Mohd Amin and Sulaiman, Shaharin. A. and Ibrahim, Idris and Baharddin, Zuhairi (2012) Causal Model for Peak and Off Peak Waste Heat Recovery for Chilled Water Production. [Citation Index Journal]

Abdul Kadir, Amirruddin and Hanipah, M. R. and Firmansyah, and Sulaiman, S. A. and Abdul Aziz, A. R. (2009) Gasohol Blends Spray Visualisation by Using Video Image. In: Malaysian Technical Universities Conference on Engineering and Technology, June 2009, Kuantan, Malaysia.

Abdul Karim, Z. A. (2009) Development of Valve Less Micropump Preliminary Characteristics from Fluid Flow. In: 11th International Conference on Electronics & Packaging 2009, 1-3 Dec 2009, Penang.

Abdul Karim, Z. A. and Sulaiman, S. A. (2007) Fuel Injection Rate Characteristics and Their Effects on Pollutant Emissions in Diesel Engine. In: 3rd World Engineering Congress, August 2007, Penang, Malaysia.

Abdul Karim, Z. A. and Sulaiman, S. A. and Samni, Z. A. (2007) Performance Analysis of Multi-hole DI Diesel Injectors using Heat Release Rate Modelling. In: Curtin University of Technology Sarawak Engineering Conference (CUTSE), November 2007, Miri, Sarawak.

Abdul Karim, Z. A. (2011) Chapter 3 Fundamentals of Gas District Cooling in Gas District Cooling in Malaysia. In: Gas District Cooling in Malaysia. LAP LAMBERT Academic Publishing GmbH & Co., Germany, pp. 41-53. ISBN 978-3-8465-5441-8

Abdul Karim, Z. A. (2008) EFFECT OF INLET AIR COOLING ON GAS TURBINE PERFORMANCE. In: International Conference on Mechanical and Manufacturing Engineering, May 2008, Johor Bahru, Malaysia.

Abdul Karim, Z. A. (2009) MEASURING THE SUCCESS OF INDUSTRIAL INTERNSHIP PROGRAMME FOR UNDERGRADUATE STUDY. In: International Engineering Education Conference 2009, 16-19 May 2009, Madinah, Kingdom of Saudi Arabia.

Abdul Karim, Z. A. and Mohd Azmi, Mohd Norshahrul Hafizi and Abdullah, Ahmad Shafawi (2012) Design of a Heat Exchanger for Gas Turbine Inlet Air using Chilled Water System. Energy Procedia, 14 (iii-xi). pp. 1689-1694. ISSN 1876-6102

Abdul Karim, Z. A. and Philip Waden, Augustino Yongo (2008) Development of Analytical Model for Energy Audit of Cogeneration Plant. In: 2nd Engineering Conference (ENCON 2008), 18-19 December 2008, Kuching, Sarawak.

Abdul Karim, Z. A. and Yongo A., Philip Waden (2011) Analytical Models for Energy Audit of Cogeneration Plant. [Citation Index Journal]

Abdul Karim, Z. A. and Yongo A., Philip Waden (2008) Development of Analytical Model for Energy Audit of Refrigeration Systems. In: 4th International Conference on Cooling and Heating Technologies, 28-31 Oct 2008, Jinhae City, Korea.

Abdul Majid, M. Amin and M. Hashim , Fakhruldin (2003) Equity-based Partnership of University-Industry for New Product. In: Unipreneur 2003 Konferen & Dialog, University-Industry-Government Networking Towards Pioneering Innovation, 9 – 10 June 2003, Kuala Lumpur.

Abdul Rani, A. M. and Anua, M. R. M. and Sulaiman, S. A. and Ahmad, Faiz and Hussain, P (2008) Case Study on Vibration Analysis of Crude Oil Transfer Pumps. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Abdul Rani, A. M. and Mun, E. T. and Sulaiman, S. A. and Hussain, P and Ahmad, Faiz (2008) Pilot Study on Laminated Tooling for Implementation of Conformal Heating Channel. In: National Conference of Design and Concurrent Engineering (DECON), October 2008, Melaka.

Abdul Rani, A. M. and Sulaiman, S. A. and Ariwahjoedi, B. (2008) Using Optical Light Microscopy and Scanning Electron Microscopy to Analyse and Quantify Flexible Polyurethane Foam Cell Size. In: 17th Scientific Conference organized by Electron Microscopy Society of Malaysia, December 2008, Shah Alam.

Abdul Rani, A. M. and Vu, Trieu Minh (2009) Modeling and control of distillation column in a petroleum process. Mathematical Problems in Engineering, 2009 . ISSN 1024123X

Abdullah, Mohamad Zaki and Bickerton, Simon and Bhattacharyya, Debes (2005) Enhancement of convective heat transfer to polymer manufacturing molds. Polymer Engineering and Science, 45 . pp. 114-124.

Abdullah, Mohamad Zaki and Bickerton, Simon and Bhattacharyya, Debes (2007) Rotational molding cycle time reduction through surface-enhanced molds, Part B: Experimental study. Polymer Engineering and Science, 47 . pp. 1420-1429.

Abdullah, Mohamad Zaki and Bickerton , S and Bhattacharyya, D (2007) Rotational molding cycle time reduction through surface enhanced molds: Part A--theoretical study. Polymer Engineering and Science, 47 . pp. 1406-1419.

Abdullah, Mohamad Zaki and Megat Yusoff, Puteri S. M. and Mat Shayuti, Muhammad S. (2011) Compressive Properties and Morphology of Polypropylene/Polycarbonate Blends. In: 2011 International Conference on Environment and Industrial Innovation, 17-19 June, 2011, Kuala Lumpur.

Abdullah , Mohamad Zaki and Bickerton, Simon and Bhattacharyya, Debes (2005) Achieving large cycle time reductions through mold surface modifications. RotoWorld Magazine .

Abdullah , Mohamad Zaki and Bickerton, Simon and Bhattacharyya, Debes (2005) ROTATIONAL MOLDING CYCLE TIME REDUCTION VIA EXTERIOR MOLD MODIFICATION. In: Annual Conference of the Society of Plastics Engineers, 1-5 May 2005, Boston, Massachusetts, USA.

Abdullah , Mohamad Zaki and Bickerton, Simon and Bhattacharyya, Debes and Crawford, R. J. and Harkin-Jones, E. (2006) Combined techniques to reduce cycle times in Rotational molding. RotoWorld Magazine .

Abdullah , Mohamad Zaki and Bickerton, Simon and Bhattacharyya, Debes and Crawford, R. J. and Harkin-Jones, E. (2009) Rotational molding cycle time reduction using a combination of physical techniques. Polymer Engineering and Science . pp. 1846-1854.

Abdullah , Mohamad Zaki and Lin , R. J. T. and Pe, K and Bhattacharyya, Debes (2009) Effects of Peak Internal Air Temperature on Mechanical Properties. RotoWorld Magazine .

Abdullah , Mohamad Zaki and Pechstein, L and Lin , R. J. T. and Bhattacharyya, Debes (2008) Behaviour of Microfibrillar Composite Blends during Product Manufacturing. In: Processing and Fabrication of Advanced Materials (PFAM XVII), December 15-17, 2008, New Delhi, India.

Abraham Debebe , Abraham Debebe and A Majid, M Amin (2009) Simulation of Natural Gas Transmission Pipeline Network System Performance. [Citation Index Journal]

Ahmad, Faiz and Abdul Latif, M.R. (2004) Hybrid Composites for Engineering Application. In: Composite Technologies for 2020: Proceedings of the Fourth Asian-Australasian Conference on Composite Materials ACCM 4. Woodhead Publishing, pp. 545-550.

Ahmad, Faiz and M. Hashim , Fakhruldin and Mamat, Othman (2005) Fiber Breakage in Metal Composites Processed by Powder Injection Moulding Technology. In: International Conference on Powder Metallurgy and Particulate Materials 2005, June 2005, Canada.

Ahmad, Faiz and Mamat, Othman and Amir, Norlaili and German, R.M (2007) Effects of Particle Shape and Fiber Length on Viscosity of Metal Composite Mixes. Advances in Powder Metallurgy . MPIF, USA. ISBN 978-0-9793488-5-3

Ahmad, Faiz and Mamat, Othman and Amir, Norlaili and German, R.M (2007) Effects of Particle Shape and Fiber Length on Viscosity of Metal Composite Mixes. Advances in Powder Metallurgy . MPIF, USA. ISBN 978-0-9793488-5-3

Ahmad, Faiz and Megat-Yusoff, P.S.M. and B.A. Rani, M. Majdi and Amir, Norlaili (2007) Injection Molded Short-Carbon Fiber Reinforced Silicon Matrix Composites. In: CUTSE2007, Curtin University, Malaysia. (Submitted)

Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor and HPS Khalil, K.Fuad and Amir, Norlaili (2007) Micro-Structural Characterization of Newly Developed Laminated Hybrid Composite. Journal of Industrial Technology . ISSN 08826404

Ahmad Majdi , Abdul Rani and Alexis , Mouangue Nanimina and Faiz , Ahmad (2009) NON-CONVENTIONAL MACHINING OF ALUMINIUM METAL MATRIX COMPOSITE. In: ICEE 17 Hawaaii USA, 26 - 31, July 2009, Hawaii USA.

Ahmed, Tahir and Mamat, Othman and Bambang Ari, Wahjoedi (2011) Development and Characterization of Alumina-Silica Sand Nanoparticle Composites. Defect and Diffusion Forum, 319-320 . pp. 85-94. ISSN 1662-9507

Aja, Ogboo Chikere and Al-Kayiem, Hussain H. and Abdul Karim, Z. A. (2011) CFD Simulation and Analysis of Thermal Diffuser for High Temperature Flue Gases. In: International Renewable Energy and Environment Conference (IREEC 2011), 24 26 June 2011, Kuala Lumpur, Malaysia .

Aja, Ogboo Chikere and Al-Kayiem, Hussain H. and Abdul Karim, Z. A. (2013) Experimental investigation of the effect of wind speed and wind direction on a solar chimney power plant. In: Sustainable City VIII. WIT Transaction on Ecology and the Environment, , II (179). WIT Press, UK, pp. 945-955. ISBN 978-1-84565-887-9

Aja, Ogboo Chikere and Al-Kayiem, Hussain H. and Abdul Karim, Z. A. (2011) Review on the Enhancement Techniques and Introduction of an Alternate Enhancement Technique of Solar Chimney Power Plant. [Citation Index Journal]

Aja, Ogboo Chikere and Al-Kayiem, Hussain H. and Abdul Karim, Z. A. (2011) Thermal Field Study and Analysis in Hybrid Solar Flue Gas Chimney Power Plant. In: National Postgraduate Conference 2011 (NPC 2011), 19-20 Sept 2011, Universiti Teknologi PETRONAS, Tronoh, Perak, MALAYSIA.

Aklilu, B. T. and Gilani, S. I. (2010) Mathematical modeling and statistical evaluation of cogeneration plant in tropical region. PhD thesis, University Technology Petronas.

Al Kayiem, Hussain H. Jaafer and Gilani, S. I. and Mustafa, A. T. (2013) A review of the vortex engine. In: The sustainable city VIII, December, 2013, Universiti Teknologi MARA, Malaysia.

Al-Batati, Nabil and Fakhruldin, Bin Mohd Hashim and Pao, William K. S. (2014) Simulation of Drill Pipe Lateral Vibration Due to Riser’s Oscillation. [Citation Index Journal]

Al-Batati, Nabil and Fakhruldin, Bin Mohd Hashim and Pao, William K. S. (2014) Simulation of Drill String Vibration inside Well Bore due to Riser’s Oscillation. [Citation Index Journal]

Al-Kayiem, Hussain H. (2010) Data Acquisition and Control System for On-line Measurement and Analysis of Complex Flow Fields. Proceedings of the 3rd International Conference on Intelligent and Advanced Systems, ICIAS2010 . ISSN ISBN: 978-1-4244-6624-5

Al-Kayiem, Hussain H. and Al-Nakeeb, Q.A. (2006) Geometry Alteration Effect on a Solar-Wind Power System. In: International Conference on Energy and Environment (ICEE2006), 28-30 August 2006, UNITEN, Selangor, Malaysia.

Al-Kayiem, Hussain H. and Bruun, H H (1991) Evaluation of a Flying X Hot-wire Probe System. Measurement Science and Technology, 2 (4). pp. 374-380. ISSN 09570233

Al-Kayiem, Hussain H. and Day, A. J. and Bruun, H. H. (1989) A computer aided manufacturing procedure for experimental two‐dimensional aerofoils. [Citation Index Journal]

Al-Kayiem, Hussain H. and Day, A. J. and Bruun, H.H. (1989) A Computer Aided Manufacturing Procedure For 2 –dimensional Experimental Aerofoil. Archive proceedings of IMechE, part G: Journal of Aerospace Engineering, 203 (G2/). pp. 139-144. ISSN 0954-4100

Al-Kayiem, Hussain H. and Ghanizadeh, A. Hussein (2011) Analysis of the Temperature Distribution in GT Blade Cooled by Compressed Air. [Citation Index Journal]

Al-Kayiem, Hussain H. and Git, H. M. and Lee, Seow L. (2009) Experimental Investigation on Solar - Flue Gas Chimney. Journal of Energy and Power Engineering, 3 (9). pp. 25-31. ISSN 1934-8975

Al-Kayiem, Hussain H. and How, MG and Nazarian, Ali (2008) Mathematical Modeling of Roof Solar Chimney for Small Scale Power Generation. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management, December 18 -19, 2008, Kuching, Sarawak, Malaysia.

Al-Kayiem, Hussain H. and Ismail, M. Z. A. and Zaki, N. M and Elfeel, M. E. (2010) Simulation of the cuttings cleaning during the drilling operation. [Citation Index Journal]

Al-Kayiem, Hussain H. and Kanboor, S. I. (2000) Effect of Multi-phase Particulate Flow on the Performance of Axial Flow Fans. In: First National Conference in Mechanical Engineering, Kufa - Iraq.

Al-Kayiem, Hussain H. and Mahdi, H. A. A. (2010) Performance enhancement of rotary air preheater by the use of pin shaped turbulators. In: Advanced Computational Methods and Experiments in Heat Transfer XI. WIT Transactions on Engineering Science (68). WITpress , Wessex Institute of Technology, UK, pp. 35-49. ISBN 978-84564-462-8

Al-Kayiem, Hussain H. and Theeb, M.A.W. (2006) Cooling Tower Evaluation to Suit 200MWatt Thermal Power Plant. In: International Conference on Energy and Environment, ICEE2006, 28-30 August 2006, UNITEN, Selangor, Malaysia.

Al-Kayiem, Hussain H. (2008) Biomass as back up to Thermal Power Systems. In: Progress of Solar Energy Research and Development 2008, 21 -22 October, Solar Energy Research Institute, University Kebangsaan, Malaysia.

Al-Kayiem, Hussain H. (2013) Energy sustainability through integrated solar thermal systems. In: Sustainable City VIII. WIT Transaction on Ecology and the Environment, 2 (179). WIT Press, UK, pp. 887-897. ISBN 978-1-84565-887-9

Al-Kayiem, Hussain H. (2008) On-Line Measurements and Analysis of High Turbulent and Reverse Flow Fields. In: 13th International Conference on Applied Mechanics and Mechanical Engineering, 27-29 May, Cairo, Egypt.

Al-Kayiem, Hussain H. and Al-Ambari, A.S.S (2007) Flow Analysis in Spiked Supersonic Intakes of A/C (I - Inviscid). In: Conference on Aerospace Technology of XXI Century, 20-21 June 2007, Kuala Lumpur.

Al-Kayiem, Hussain H. and Al-Habeeb, L.N. (2008) Performance Enhancement of Double Pipe Heat Exchangers by Enforced Turbulence on Single Surface. In: International Conference on Plant Equipment and Reliability (ICPER), 28-29 March 2008, Sunway, Malaysia.

Al-Kayiem, Hussain H. and Aziat, M. N. (2008) Fabrication of NACA4412 Airfoil Model by CAE for Wind Tunnel Tests. Proceedings of EnCon2008 . pp. 700-705. ISSN ISBN: 778-983-9257-92-2

Al-Kayiem, Hussain H. and Chelven, AK K. (2010) EXPERIMENTAL AND NUMERICAL INVESTIGATION ON A 2-D WING – GROUND COLLISION. In: World Engineering Congress 2010, Conference on Aerospace and Mechanical Engineering, 2-5 August 2010, Kuching. Sarawak.

Al-Kayiem, Hussain H. and Chin, Yee Sing and Toh, Jia Lin (2011) Performance Influence of the Solar Chimney Power Plant by Variation of the Canopy and Tower Heights. In: ASEAN Australian Engineering Congress 2011. (Submitted)

Al-Kayiem, Hussain H. and Darwish, A.A. and Mahmod, Y.A. (1998) Computational Procedure to Investigate the Boundary Layer Growth Parameters on Conventional Aerfoil. [Citation Index Journal]

Al-Kayiem, Hussain H. and El-Rahman, Mohamed (2011) RIBBED DOUBLE PIPE HEAT EXCHANGER: ANALYTICAL ANALYSIS. [Citation Index Journal]

Al-Kayiem, Hussain H. and Git, H. M. and Nazarian, A. (2008) Mathematical Modeling of Roof Solar Chimney for Small Scale Power Generation. Proceedings of EnCon2008 . pp. 730-737. ISSN ISBN: 778-983-9257-92-2

Al-Kayiem, Hussain H. and Khor, Yin Yin and Chin, Yee Sing (2012) Numerical Simulation of Solar Chimney Integrated with Exhaust of Thermal Power Plant. In: Advanced Computational Methods and Experiments in Heat Transfer XII. WIT Press.

Al-Kayiem, Hussain H. and Sa'adaldeen, A. E. (2007) Performance Analysis of Savonius Wind Rotor for Directed Flow Operation. In: first Enegineering Conference, EnCon2007, 27-28 Dec, Kuching, Serawak, Malaysia.

Al-Kayiem, Hussain H. and Salih, T. W. (2008) Combined Effect Of Incidence - Forebody Angles on the Flow Structure Inside Spiked Supersonic Intakes. In: 13 International conference on Applied mechanics and Mechanical Engineering, AMME13, 27-29 May, Military Technical College, Cairo, Egypt .

Al-Kayiem, Hussain H. and Salih, T. W. and Al-Ambari, A. S. S. (2010) ON THE VISCOUS VERSUS NON-VISCOUS FLOW ANALYSIS IN SUPERSONIC SPIKED INTAKES. In: World Engineering Congress 2010, conference on Aerospace and Mechanical Engineering, 2-5 August 2010, Kuching. Sarawak.

Al-Kayiem, Hussain H. and Salih, T.W. and Al-Ambari, A.S. (2011) Performance prediction procedures of the supersonic spiked intakes. [Citation Index Journal]

Al-Kayiem, Hussain H. and Shazi, R. I. and Mohd Nor, M. A. (2007) Characterization & Improvement of Low Speed Wind Tunnel. In: Conference on Applications and Design in Mechanical Engineering, CADME07, 25-26 October, Perlis, Malaysia.

Al-Kayiem, Hussain H. and Theeb, M.A.W. (2008) Alternative solution for cooling water shortage in thermal power plants. In: International Conference on Plant Equipment and Reliability (ICPER2008), March 2008, Sunway, Malaysia.

Al-Kayiem, , H.H. and Badri, T. M. (2012) Transient analysis of structronics shell. In: Trends in Intelligent Robotics, Automation, and Manufacturing. Communications in Computer and Information Science , 330 . Springer Berlin Heidelberg, Berlin - Germani, pp. 313-321. ISBN 978-3-642-35196-9

Al-Neami, F. B. and Al-Kayiem, Hussain H. (2008) Hybrid Neural Networks and Genetic Algorithm for Fault Detection and Diagnosis of a Plant. In: 1st National Postgraduate Conference, NPC08, 31March to 1 April, Universiti Teknologi PETRONAS.

Al-Waked, R. and Nasif, M. S. and Morrison, G. and Behnia, M. (2013) CFD simulation of air to air enthalpy heat exchanger. [Citation Index Journal]

Al-Wakeel, Haitham and Abdul Karim, Z. A. and Mat Jamlus, M. H. (2012) Soot Reduction Strategy: A Review. Journal of Applied Sciences, 12 (23). pp. 2338-2345. ISSN 1812-5654

Al-baroudy, T. M. B. and Al-Kayiem, Hussain H. (2013) Laminated smart shell structures; theory and analysis. In: Shell Structures: Theory and Application. Taylor and Francis group, London, pp. 49-52. ISBN 978-1-138-00082-7

Al-baroudy, T. M. B. and Al-Kayiem, Hussain H. and Taufiq, M.B. (2013) The Theory of Functional and Adaptive Shell Structures: A Compendium. LAP LAMBERT Academic Publishing (May 15, 2013). ISBN 13- 978-3846521755

Alemu Lemma, Tamiru and Fakhruldin , Bin Mohd Hashim and Chalilullah , Rangkuti (2011) Generating Gas Turbine Component Maps Relying on Partially Known Overall System Characteristics. Journal of Applied Sciences, 11 (11). pp. 1885-1894. ISSN 182-5654

Alemu Lemma, Tamiru and Mohd Hashim, Fakhruldin (2011) Wavelet Neural Network based Fault Detection and Diagnosis in an Industrial Gas Turbine. In: 3rd CUTSE2011 International Conference on Innovative Green Technology for Sustainable Development, 8th – 9th November 2011, Miri, Sarawak, Malaysia.

Alemu Lemma, Tamiru and Mohd Hashim, Fakhruldin (2011) Fuzzy Systems and Bat Algorithm for Exergy Modeling in a Gas Turbine Generator. In: IEEE Colloquium on Humanities, Science and Engineering Research, 5-6 December, Penang.

Alemu Lemma, Tamiru and Mohd Hashim, Fakhruldin (2011) A New Optimization Algorithm based on Copulation Behavior of Simine Jackals. In: 3rd CUTSE2011 International Conference on Innovative Green Technology for Sustainable Development, 8th – 9th November 2011, Miri, Sarawak, Malaysia.

Alemu Lemma, Tamiru and Mohd Hashim, Fakhruldin (2011) Normalized Radial Basis Function Networks Applied to Exergy, NOx, and Creep Life Prediction in an Industrial Gas Turbine. In: 3rd CUTSE International Conference On Innovative Green Technology for Sustainable Development, 8-9 November 2011, Miri, Sarawak, Malaysia.

Alemu Lemma, Tamiru and Mohd Hashim, Fakhruldin and Rangkuti, Chalillullah (2010) Fault Detection Relevant Modeling of an Industrial Gas Turbine based on Neuro-Fuzzy Approach. In: International Conference on Plant Equipment and Reliability (ICPER), 15-17 June 2010, Kuala Lumpur, Malaysia.

Alemu Lemma, Tamiru and Rangkuti, Chalillullah and Mohd Hashim, Fakhruldin (2009) Fault Detection Relevant, Neural Network and Evolutionary Algorithm based Model for a Single-shaft Industrial Gas Turbine. In: International Conference on Advances in Mechanical Engineering (ICAME), 24 – 25 June 2009, Kuala Lumpur, Malaysia.

Alemu Lemma, Tamiru and Rangkuti, Chalillullah and Mohd Hashim, Fakhruldin (2009) Neuro-Fuzzy and Particle Swarm Optimization based Model for the Steam and Cooling sections of a Cogeneration and Cooling Plant. In: International Conference on Energy and Environment (ICEE), 7 – 8 December 2009, Malacca, Malaysia.

Alemu Lemma, Tamiru and Rangkuti, Chalilullah and Mohd Hashim, Fakhruldin (2008) Fault Detection and Diagnosis Strategies for a Cogeneration and Cooling Plant. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Ali, Asad and A Majid, Mohd Amin and Muhammad, Masdi (2012) Comparative Study between Degradation Analysis and API 510 Remaining Life Evaluation Method for Feed Gas Filter Vessel Reliability Analysis. In: 2012 The 3rd International Conference on Production, Energy and Reliability (ICPER2012), 12-14 July 2012, Kuala Lumpur Convention Center.

Ali, Asad and A Majid, Mohd Amin and Muhammad, Masdi (2012) Comparative Study between Degradation Analysis and API 510 Remaining Life Evaluation Method for Feed Gas Filter Vessel Reliability Analysis. [Citation Index Journal]

Alnaimi, F. B. I. and Al-Kayiem, Hussain H. (2010) Multidimensional Minimization Training Algorithms for Steam Boiler High Temperature Superheater Trip using Artificial Intelligence Monitoring System. In: Control Automation Robotics & Vision (ICARCV), 2010 11th International Conference, 7-10 Dec. 2010, singapore.

Alnaimi , F. B. I. and Al-Kayiem, Hussain H. (2010) Artificial Intelligent System for Steam Boiler Diagnosis Based on Superheater Monitoring. Journal of Applied Sciences, online . ISSN 18125654

Amir, A. and Mamat, O. (2011) A Review of Wear Mechanisms of Ceramic-Reinforced Metal-Matrix Composite: Case Study of Nano Silica Reinforced Iron. Defect and Diffusion Forum, 319 . pp. 77-84.

Amir, Adibah and Mamat, Othman (2011) A Review of Wear Mechanisms of Ceramic-Reinforced Metal-Matrix Composite: Case Study of Nano Silica Reinforced Iron. Defect and Diffusion Forum, 319-320 . pp. 77-84. ISSN 1662-9507

Amir, Norlaili (2006) Wear Behaviour of Filtered-Arc Deposited Titanium Nitride Coatings. Masters thesis, University of New South Wales.

Amir, Norlaili and Ahmad, Faiz and Megat-Yusoff, P.S.M. (2011) Study on the Fibre Reinforced Epoxy-based Intumescent Coating Formulations and their Char Characteristics. [Citation Index Journal]

Amir, Norlaili and Ahmad, Faiz and Megatt-Yusoff, P.S.M. (2010) Study on the Fibre Reinforced Epoxy-based Intumescent Coating Formulations and the Char Characteristics. In: ICPER2010, 15-17 June 2010, Kuala Lumpur Convention Centre.

Amir, N. and Sudin, Mustafar and Ahmad, Faiz (2008) Adhesion Properties of Metallic Coatings on Mild Steel Substrates. In: ICPER 2008, 27-28 March 2008, Sunway Pyramid Convention Centre, Selangor.

Amir, Norlaili (2013) Development of Fibres Reinforced Intumescent Coatings for Mild Steel Structures. PhD thesis, Universiti Teknologi PETRONAS.

Amir, Norlaili (2013) Development of Fibres Reinforced Intumescent Coatings for Mild Steel Structures. PhD thesis, Universiti Teknologi PETRONAS.

Amir, Norlaili (2004) A Study on the Adhesion Properties of Metallic Coatings. Other thesis, Universiti Teknologi PETRONAS.

Amir, Norlaili and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2011) CHARACTERIZATION OF INORGANIC NON-METALLIC FIBRE REINFORCED EPOXY-BASED INTUMESCENT COATINGS (FRIC) AND CHARTEX 7. Engineering e-Transaction, 6 (2). pp. 136-144. ISSN 1823-6379

Amir, Norlaili and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2011) CHARACTERIZATION OF INORGANIC NON-METALLIC FIBRE REINFORCED EPOXY-BASED INTUMESCENT COATINGS AND CHARTEX 7 EXPOSED TO HIGH TEMPERATURE. In: Regional Tribology Conference, 22-24 November 2011, Bayview Hotel, Langkawi Island, Malaysia.

Amir, Norlaili and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2013) Char Strength of Wool Fibre Reinforced Epoxy-Based Intumescent Coatings (FRIC). Advanced Materials Research, 626 . pp. 504-508.

Amir, Norlaili and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2012) Mechanisms of Char Strengthening in the Fibre Reinforced Intumescent Coatings. Journal of Applied Sciences, 12 (23). pp. 2459-2463. ISSN 1812-5654

Amir, Norlaili and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2012) Mechanisms of Char Strengthening in the Fibre Reinforced Intumescent Coatings (FRIC) Determined via Scanning Electron Microscopy. In: The International Conference on Production, Energy and Reliability (ICPER2012), 12-14 June 2012, Kuala Lumpur Convention Centre.

Amir, Norlaili and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2008) Study on the Fibre Reinforced Epoxy-based Intumescent Coating Formulations and the Char Characteristics. In: ICPER2010, 15-17 June 2010, Kuala Lumpur Convention Centre.

Amir, Norlaili and Faiz , Ahmad and Puteri , Sri Melor Bt Megat Yusoff (2012) Char Strength of Wool Fibre Reinforced Epoxy-Based Intumescent Coatings (FRIC). In: International Conference on Advanced Material Engineering & Technology 2012 (ICAMET 2012), 28-30 Nov 2012, Bayview Beach Resort, Pulau Pinang.

Amir, Norlaili and Sudin, Mustafar and Ahmad, Faiz (2008) Adhesion Properties of Metallic Coatings on Mild Steel Substrates. In: ICPER 2008, 27-28 March 2008, Sunway Pyramid Convention Centre, Selangor.

Amir, Norlaili and W. Othman, W. M. S. and Faiz , Ahmad (2015) Fire Resistance Properties of Ceramic Wool Fiber Reinforced Intumescent Coatings. [Citation Index Journal]

Anbese, Yohannes Timarat and Abdul Aziz, A. R. and Abdul Karim, Z. A. (2009) Flame development characteristics at variable swirl level inductions in a stratified CNG direct injection combustion engine. [Citation Index Journal]

Anbese, Yohannes T. and A.R.A., Aziz and Abdul Karim, Z. A. (2011) Flame Development Study at Variable Swirl Level Flows in a Stratified CNG DI Combustion Engine using Image Processing Technique. [Citation Index Journal]

Ariatedja, J.B. and Mamat, O. (2011) A Semi-elliptical Crack Modeling and Fracture Constraint on Failure Diagram. Journal of Applied Sciences, 11 (11). pp. 2006-2011. ISSN 1812 5654

Aris, M. S. and Ali, M. Y. and Jaafar, A. and Sulaiman, S. A. (2002) Application of CFD in Automotive Cooling System. In: 4th ASEAN ANSYS User Conference, November 2002, Singapore.

Aris, M. Shiraz and Owen, ieuan and sutcliffe, c.j. (2007) The Application of Shape Memory Alloy as Longitudinal Vortex Generators for Enhanced Convective Heat Transfer. In: 10th UK Heat Transfer Conference, Edinburgh, Scotland..

Aris, M. Shiraz and owen, Ieuan and sutcliffe, c.j. (2008) The Development of Active Flow Control Devices from Shape Memory Alloys for the Convective Enhancement of Heated Surfaces. In: IMECE2008, 2008 ASME International Mechanical Engineering Congress and Exposition, October 31-November 6, 2008, boston, Mass.

Aris, M. Shiraz and owen, ieuan and sutcliffe, c.j. (2007) The Application of Shape Memory Alloy as Vortex Generators and Flow Control Devices for Enhanced Convective Heat Transfer. In: FEDSM2007 5th Joint ASME/JSME Fluids Engineering Conference, san Diego, Ca.

Aris, M.S. (2010) The Two-Way Training of Shape Memory Alloys Vortex Generators Manufactured in a Selective Laser Melting Process. In: International Conference on Plant Equipment and Reliability (ICPER 2010) , 15-17 June 2010, Kuala Lumpur, Malaysia .

Aris, M.S. and Chin, Yee Sing (2012) An Experimental Investigation on the Handling and Storage Properties of Biomass Fuel Briquettes Made from Oil Palm Mill Residues. In: 3rd Internatinal Conference on Production, Energy and Reliability, ESTCON-ICPER2012, June 2012, Kuala Lumpur.

Aris, M.S. and Chin, Yee Sing (2012) A Study of Biomass Fuel Briquettes from Oil Palm Mill Residues. A Study of Biomass Fuel Briquettes from Oil Palm Mill Residues. .

Aris, M.S. and Chin, Yee Sing (2012) A Study of Biomass Fuel Briquettes from Oil Palm Mill Residues. In: ESTCON-ICPER2012, 12-14 June2012, KL Convention Centre. (Submitted)

Aris, M.S. and Chin, Yee Sing and Ibrahim, A.B.A. (2012) Development of Fuel Briquettes from Dewatered Poultry Sludge. In: ICFEPES2012, Kuala Lumpur. (Submitted)

Aris, M.S. and McGlen, R.J. and Owen, I (2011) An Experimental Investigation into the Deployment of 3D, Finned Wing and Shape Memory Alloy Vortex Generators in a Forced Air Convection Heat Pipe Fin Stack. [Citation Index Journal] (In Press)

Aris, M.S. and Owen, I and Sutcliffe, C.J. (2011) The Development of Active Vortex Generators from Shape Memory Alloys for the Convective Cooling of Heated Surfaces. [Citation Index Journal]

Aris, M.S. and Owen, I and Sutcliffe, C.J. (2011) The development of active alloy vortex generators from shape memory alloys for the convective cooling of heated surfaces. [Citation Index Journal]

Aris, Mohd (2010) The Two-Way Training of Shape Memory Alloys Vortex Generators Manufactured in a Selective Laser Melting Process. In: International Conference on Plant Equipment and Reliability (ICPER 2010), Kuala Lumpur, Malaysia , 15-17 June 2010, Kuala Lumpur, Malaysia.

Assadi, M.Kh (2009) Solar Combi-System a New Solution for space Heating in Buildings. Journal of Applied Sciences, 9 (8). pp. 1458-1465. ISSN 1812-5654

Atnaw, Samson Mekbib and Kueh, S. C. and Sulaiman, S. A. (2014) Study on Tar Generation from Downdraft Gasification of Oil Palm Fronds. [Citation Index Journal]

Atnaw, Samson Mekbib and Sulaiman, S. A. and Moni, M. N. Z. (2011) Experimental Study on Temperature Profile of Fixed – Bed Gasification of Oil- Palm Fronds. In: 4th International Meeting on Advances in Thermofluids (IMAT), Melaka.

Atnaw, Samson Mekbib and Sulaiman, S. A. and Yusup, Suzana (2011) Downdraft Gasification of Oil-palm Fronds. Trends in Applied Sciences Research, 6 (9). pp. 1006-1018. ISSN 2151-7908

Atnaw, Samson Mekbib and Sulaiman, S. A. and Yusup, Suzana (2014) Influence of Fuel Moisture Content and Reactor Temperature on the Calorific Value of Syngas Resulted from Gasification of Oil Palm Fronds. [Citation Index Journal]

Atnaw, Samson Mekbib and Sulaiman, S. A. and Yusup, Suzana (2011) Prediction of Calorific Value of Syngas Produced from Oil-Palm Fronds Gasification. In: 3rd National Postgraduate Conference, Tronoh.

Atnaw, Samson Mekbib and Sulaiman, S. A. and Yusup, Suzana (2010) A Simulation Study of Downdraft Gasification of Oil-Palm Fronds Using ASPEN PLUS. In: International Conference on Plant Equipment and Reliability (ICPER), June 2010, Kuala Lumpur.

Atnaw, Samson Mekbib and Sulaiman, S. A. and Yusup, Suzana (2011) A Simulation Study of Downdraft Gasification of Oil-Palm Fronds using ASPEN PLUS. [Citation Index Journal]

Atnaw, Samson Mekbib and Sulaiman, S. A. and Yusup, Suzana (2013) Syngas production from downdraft gasification of oil palm fronds. Energy , 61 . pp. 491-501. ISSN 3605442

Awang, Mokhtar and Mohammadpour, Ehsan (2012) A Finite Element Model to Investigate the Stress-Strain Behavior of Single Walled Carbon Nanotube (SWCNT). In: Materials with Complex Behavior II. Springer Germany.

Awang, Mokhtar and Mucino, Victor H. (2010) Energy Generation during Friction Stir Spot Welding (FSSW) of Al 6061-T6 Plates. Materials and Manufacturing Processes, 25 . pp. 167-174. ISSN 1042-6914

Awang, Mariyamni and Jaafar, A (2012) Wormlike micelles for mobility control in EOR. [Citation Index Journal]

Awang, Mokhtar and Ahmat, Iffatun and Hussain, Patthi (2011) Experience on Friction Stir Welding and Friction Stir Spot Welding at Universiti Teknologi Pertonas. [Citation Index Journal]

Azmi Md Haniffa, Mohamad and Mohd Hashim , Fakhruldin (2011) Review of Hydrate Prevention Methods for Deepwater Pipelines. In: IEEE Conference on Open Systems (ICOS2011), 25 - 28 Sept., 2011, Langkawi, Malaysia,.

Azmi Md Haniffa, Mohamad and Mohd Hashim, Fakhruldin (2011) Recent Developments in In-Line Inspection Tools (ILI) For Deepwater Pipeline Applications. In: 3rd National Postgraduate Conference(NPC2011), 19 -20 Sept., 2011, Universiti Teknologi PETRONAS, Bandar Seri Iskandar,Tronoh, Perak, Malaysia.

B

B. Shehabuddeen , Kamarudin and Mohd Hashim , Fakhruldin (2010) Development of a Vertical Self-balancing Experimental Autonomous Underwater Vehicle. International Journal of Engineering and Technology (IJET-IJENS), 10 (2). ISSN 2077-1185

Badri, T. M. and Al-Kayiem, Hussain H. (2010) Numerical Analysis of Thermal and Elastic Stresses in Thick Pressure Vessels for Cryogenic Hydrogen Storage Apparatus. [Citation Index Journal]

Badri, Thar M. and Al-Kayiem, Hussain H. and Taufiq, Mohammed Badri (2013) The Theory of Functional and Adaptive Shell Structures. LAP LAMBERT Academic Publishing, http://www.amazon.com/. ISBN ISBN-10: 3846521752 | ISBN-13: 978-3846521755

Baharom, M and Hussain, K and Day, A J (2009) Design concepts and analysis of a semi-active steering system for a passenger car. Proceeding of the IMechE , 223 (4/2009). pp. 283-292.

Baharom, Masri B and Hussain, Khalid and Day , A J (2009) Analysis of the properties of a steering shaft used as a back-up for a steer-by-wire system during system failure. [Citation Index Journal]

Baheta, Aklilu Tesfamichael (2015) Parametric analysis of carbon dioxide transcritical and supercritical power cycles using low grade heat source. ARPN Journal of Engineering and Applied Sciences, 10 (21). ISSN 1819-6608

Basrawi, Firdaus and Ibrahim, Thamir and Lee, Gui and Habib, Khairul (2015) Effect of Solar Fraction on the Economic and Environmental Performance of Solar Air-Conditioning by Adsorption Chiller in a Tropical Region. [Citation Index Journal]

Batcha, M. F. M. and Nawi, M. A. M. and Sulaiman, S. A. and Raghavan, V. R. (2012) Numerical Investigation of Air Flow in a Swirling Fluidized Bed. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Batcha, M. F. M. and Nawi, M. A. M. and Sulaiman, S. A. and Raghavan, V. R. (2013) Numerical Investigation of Airflow in a Swirling Fluidized Bed. [Citation Index Journal]

Batcha, M. F. M. and S.A., Sulaiman and Raghavan, V. R. (2012) Hydrodynamics of Oil Palm Frond in a Swirling Fluidized Bed Dryer. Applied Mechanics and Materials, 117-11 . pp. 1829-1833. ISSN 1662-7482

Batcha, M. F. M. and Sulaiman, S. A. and Raghavan, V. R. (2012) Hydrodynamics of Oil Palm Frond in a Swirling Fluidized Bed Dryer. Applied Mechanics and Materials, 117-11 . pp. 1829-1833. ISSN 1662-7482

Belachew , Chanyalew Taye and Che Ismail, Mokhtar and Karuppanan , S (2011) Burst Strength Analysis of Corroded Pipelines by Finite Element Method. [Citation Index Journal]

Belachew , Chanyalew Taye and Che Ismail, Mokhtar and Karuppanan , Saravanan (2009) EVALUATION OF AVAILABLE CODES FOR CAPACITY ASSESSMENT OF CORRODED PIPELINES. In: NACE Asis Pacific , Kuala Lumpur.

Belusko, M and Halawa,, E. and Bruno, F. (2012) Characterising PCM thermal storage systems using the effectiveness-NTU approach. [Citation Index Journal]

Benjamin Iyenagbe, U. and Mamat, O. (2012) Hydro Thermo-Baric Processing and Properties of Nano Silica from Rice Husk. Applied Mechanics and Materials, 152 . pp. 177-182.

Bickerton, Simon and Abdullah, Mohamad Zaki (2003) Modeling and evaluation of the filling stage of injection/compression moulding. Composites Science and Technology, 63 . pp. 1359-1375.

Bruun, H. H. and Al-Kayiem, Hussain H. and Badran, O.O. (1990) Flying Hot-Wire Anemometry with X-Wire Probe. The American Soceity of Mechanical Engineers, FED-97 . pp. 81-86. ISSN 0-7918-049-1

Bruun, H. H. and Khan , M. A. and Al-Kayiem , H. H. and Ferdad , A. A. (1988) Velocity Calibration Relationship For Hot-wire Anemometry. J. of Phys. E.: Sci. Instrum, 21 (No.2). pp. 225-232. ISSN 00223735

Bruun, H. H. and Nabhani, Nadir and Al-Kayiem, H. H. and Fardad, A.A. and Khan, M A and Hogarth, E (1990) Calibration and Analysis of X Hot-wire Probe Signals. Measurement Science and Technology, 1 (8). pp. 782-785. ISSN 09570233

Bruun, H. H. and Nabhani , N and Fardad, A. A. and Al-Kayiem, Hussain H. (1990) Velocity Component Measurements by X Hot-wire Anemometry. Measurement Science and Technology, 1 (12). pp. 1314-1321.

Bruun, H.H. and Badran, O.O. and Al-Kayiem, Hussain H. (1991) A flying hot-wire Probe Study of Flow Behined a Backward-Facing Step. In: Second World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Dubrovnik, Yugoslavia.

Bruun, H.H. and Khan , M. A. and Al-Kayiem, Hussain H. and Fardad, A. A. (1998) Velocity calibration relationships for hot-wire anemometry. [Citation Index Journal]

Bruun, H.H. and Jaju, A.A. and Al-Kayiem, Hussain H. and Khan, M.A. (1988) A Flying Hot-wire probe For Measurement In Separated Flow. Proceedings of the 1st World Conference in Experiments in Heat Transfer, Fluid Mechanics and Thermodynamics . pp. 482-489.

Bruun, H.H. and Jaju, A.A. and Al-Kayiem, Hussain H. and Khan, M.A. (1988) A Flying Hot-wire probe For Measurement In Separated Flow. [Citation Index Journal]

Burhani, Nurul Rawaida Ain and Abd Majid, M. Amin (2012) Life Cycle Cost (LCC) Analysis; A Case for Gas District Cooling Plant. In: 2012 The 3rd International Conference on Production, Energy and Reliability (ICPER2012), 12-14 June 2012, Kuala Lumpur Convention Centre.

C

Che Ismail, Mokhtar and Fatah, Martin Choirul (2009) EFFECT OF LOW CONCENTRATION ACETIC ACID ON CO2 CORROSION IN TURBULENT FLOW CONDITIONS. [Citation Index Journal]

Chen, Xiaohui and Pao, William K. S. and Li, Xikui (2013) Coupled thermo-hydro-mechanical model with consideration of thermal-osmosis based on modified mixture theory. [Citation Index Journal]

Chin, Swee Miin and Sulaiman, S. A. and Raghavan, V. R. and Heikal, M. R. (2013) PIV Study of Particles Motion in a Swirling Fluidized Bed. In: 8th SDEWES Conference, 22-27 September 2013, Dubrovnik.

Chin, Yee Sing (2012) A Study of Biomass Fuel Briquettes from Oil Palm Mill Residues. In: ESTCON2012-ICPER2012. (Submitted)

Chin, Yee Sing (2008) A Study of Sawdust Combustion Using Different Combustion Models in FLUENT. In: ICPER 2008, 27-28March2008, Selangor.

Chin, Yee Sing and Al-Kayiem, Hussain H. and Mohd Shiraz, Aris and Suhaimi, Hassan (2008) Experimental Investigations on Fuel Briquettes Produced from Agricultural and Industrial Waste. In: ICPER 2008, 27-28 March 2008, Selangor.

Chin, Yee Sing and Aris, M. Shiraz (2006) Biomass Fuel Briquette from Oil Palm Shell and Fiber with Waste Paper. In: 34th International Exhibition of Invention, New Techniques and Products 2006, 5th-9th April 2006, Geneva.

Chin, Yee Sing and Aris, M. Shiraz (2005) ENERGY FROM WASTE Development of Fuel Briquettes from Agricultural Waste. In: 16th International Invention Innovation Industrial Design & Technology Exhibition 2005, 19th - 21st May 2005, Kuala Lumpur.

Chin, Yee Sing and Aris, M.S. (2012) An Experimental Investigation on the Handling and Storage Properties of Biomass Fuel Briquettes Made from Oil Palm Mill Residues. In: ESTCON-ICPER2012. (Submitted)

Chin, Yee Sing and Aris, Mohd. Shiraz (2012) A Study of Biomass Fuel Briquettes from Oil Palm Mill Residues. In: ESTCON-ICPER2012, 12-14 June2012, KL Convention Centre. (Submitted)

Chin, Yee Sing and Stephenson, Peter and Wang, Meihong (2008) A CFD Study of Sawdust Combustion in a Furnace. In: 7th European Conference on Coal Research and Its Applications, 3rd-5th Sep 2008, Cardiff, UK.

Chun, Lee Kuo and Jaafar, A (2012) Ionic Liquid as Low Dosage Hydrate Inhibitor (LDHI) for Flow Assurance in Pipeline. In: International Conference on Production, energy and reliability, 2012, MALAYSIA.

che ismail, mokhtar and fatah, martin choirul (2010) Empirical Equation of CO2 Corrosion with the Presence of Low Concentrations of Acetic Acid at Turbulent Flow Conditions. [Citation Index Journal]

D

D.E., Woldemichael and Bin Mohd Hashim, Fakhruldin (2008) Concept Modeler: A Computer Aided Conceptual Design Support Tool. In: In International Graduate Conference on Engineering and Science 2008 (IGCES 2008), 2008, Johor Bahru, Malaysia.

Debnath , Sujan and Piaw, T. K. and Woldemichael, Dereje Engida (2013) Thermo-Mechanical Stress Analysis in Electronic Packaging with Continuous and Partial Bond Layer. [Citation Index Journal] (In Press)

Devarajan, R. and Mahendran, S. and Abdul Karim, Z. A. and Nagarajan, T. (2011) Design of Valve Less Micropump Using Preliminary Characteristics from Fluid Flow. [Citation Index Journal]

E

E. Woldemichael , Dereje and Mohd Hashim, Fakhruldin (2007) Development of Computer Aided Conceptual Design Tool for Sub-sea Process Equipment Design. In: Conference on Design, Simulation, Product Development and Optimization, Dec 2007, Penang, Malaysia .

El-Harbawi, Mohanad (2010) MDDSS: a New Software for Multicomponent Distillation Design and Simulation. International Review of Chemical Engineering (I.RE.CH.E.), 2 (1). pp. 155-160.

Elamvazuthi, I and Kamaruddin, Susana and M. Yusoff, M.S. Azmi (2009) Automation of Nesting and Cutting Processes of Leather Furniture Production: A Case Study. International Journal of Mechanical & Mechatronics Engineering, 9 (10). pp. 18-24. ISSN 2077-124X

Elneel, R. and Sulaiman, S. A. and Ariwahjoedi, B. (2011) Feasibility Study of Gasification Oil Palm Fronds in an Updraft Gasifier. In: The 4th International Meeting of Advances in Thermofluids, Melaka.

Elneel, R. and Sulaiman, S. A. and Ariwahjoedi, B. (2013) Prediction of Heating Values of Oil Palm Fronds from Ultimate Analysis. Journal of Applied Sciences, 13 (3). pp. 491-196. ISSN 1812-5654

Elsaied, Waiel Kamal and Abdul Karim, Z. A. (2008) Development of a Simulation Program to Determine the Performance of Gas Turbine. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Eltilib, R. AE. E. and Al-Kayiem, Hussain H. and Jaafar, Azuraien (2011) Investigation on the Particle Settling Velocity in Non-Newtonian Fluids. Journal of Applied Sciences, online . ISSN 18125654

Eltilib, R. A E. E. and Al-Kayiem, Hussain H. (2009) Simulation of Cutting Particles Transportation in Oil Well Drilling. In: Proceedings of the 1st National Post Graduate Conference, NPC09, 25-26 March 2009, Universiti Teknologi PETRONAS.

Engida Woldemichael, Dereje and Mohd Hashim, Fakhruldin (2009) Development of Conceptual Design Support Tool for Subsea Process Equipment Design. Journal of Mechanical & Mechatronics Engineering (IJMME-IJENS), 9 (10). pp. 12-17. ISSN 2077-124X

Engida Woldemichael, Dereje and M Hashim, Fakhruldin (2011) A framework for function-based conceptual design support system. Journal of Engineering, Design and Technology, 9 (3). pp. 250-272. ISSN 1726-0531

F

Faiz , Ahmad and Ab. Rani, Azman and Bin-Sudin, M. and Amir, Norlaili (2006) Sintering Short Carbon Fiber Reinforced Copper Composites for Thermal Management of Electronic Devices. In: 3rd Colloquium Friction Materials, 20-21 Nov 2006, Langkawi, Malaysia.

Faiz , Ahmad and M Rafi, Raza and Ahmad, Majdi and S.H , Jason Lo (2011) Wear Properties of Alumina Particles Reinforced Aluminium ALLoy Matrix Composite. Jounal of Applied Sciences, 2011 . ISSN 1812-5654/ DOI : 10.3923/jas.2011

Farooq, M. and Ramli, Anita and Gul, S. and Muhammad, Nawshad (2011) The Study of Wear Behaviour of 12-hydroxystearic acid in Vegetable Oils. [Citation Index Journal]

Fatikul Arif, Muhamad and Megat-Yusoff, Puteri Sri Melor and Ahmad, Faiz (2010) Effects Of Chemical Treatment On Oil Palm Empty Fruit Bunch Reinforced High Density Polyethylene Composites. Journal of Reinforced Polymer Composites, 29 (14). pp. 2105-2118. ISSN 0731-6844

Firmanto, H. and Hussain, P. and Mamat, O. (2011) Reaction Layers of the Diffusion-Bonded Sialon and High-Chromium Steel. [Citation Index Journal]

Firmanto, H. and Hussain, P. and Mamat, O. (2011) Reaction Layers of the Diffusion-Bonded Sialon and High-Chromium Steel. [Citation Index Journal]

G

G. , Satheesh Kumar and T. , Nagarajan (2011) Reconfigurable Stewart Platform for Spiral Contours. [Citation Index Journal]

Ghazali, Zulkipli and Abd Majid, Mohd Amin and Mohd, Shawani (2012) Optimal Solution of Transportation Problem Using Linear Programming: A Case of a Malaysian Trading Company. [Citation Index Journal]

Ghazali, Zulkipli and Abd Majid , M Amin and Mohd , Shazwani (2012) Optimal Solution of Transportation Problem Using Linear Programming: A Case of a Malaysian Trading Company. In: 2012 The 3rd International Conference on Production, Energy and Reliability (ICPER2012), 12-14 July 2012, Kuala Lumpur Convention Center.

Gilani, S. I. and Azeemuddin, Islamuddin and Al-Kayiem, Hussain H. (2013) Simulation of a collector using waste heat energy in a solar chimney power plant system. In: The sustainable City VIII, December 2013, Universiti Teknologi MARA, Malaysia.

Gilani, S. I. and Petrus, Tri Bhaskoro (2010) Transient Cooling Load Simulation of a Mechanical Workshop at UTP Using TRNSYS. International conference on plant equipment & reliability, 2010 .

Gilani, S. I. and Amin, M. A. A. and Rangkuti, Chalilillah (2008) Gas District Cooling in Malaysia : Pioneering a new industry. District Energy, 94 (3). pp. 14-18. ISSN 1077-6222

Gilani, Syed Ihtsham-ul-Haq and Ahmad, Gamil and Al-Kayiem, Hussain H. (2013) Simulation and evaluation of small scale solar power tower performance under Malaysia weather conditions. [Citation Index Journal]

Gilani, Syed Ihtsham-ul-Haq and Azeemuddin, Islamuddin and Hussain , H. Jaafer Al Kayiem (2013) Simulation of solar chimney power plant with an external heat source. [Citation Index Journal]

Gilani, Syed Ihtsham-ul-Haq and Bhaskoro, Petrus Tri and Aris, Mohd Shiraz (2013) Simulation of energy saving potential of a centralized HVAC system in an academic building using adaptive cooling technique. [Citation Index Journal]

Gilani, Syed Ihtsham-ul-Haq and How, MG and Seng, Ong Kok and Shiraz, Mohd. Aris (2013) Preliminary study of Thermoelectric system for simultaneous Heating and Cooling. [Citation Index Journal]

Goh, A and Alias, AK and Jaafar, A and Chew, KC and Ngu, JD (2012) The flow of Bodies. MATERIALS MIND .

Goo, Jia Jun and Raghavan, Vijay R. and Chin, Yee Sing (2012) Experimental Study on the Hydrodynamics of Swirling Fluidized Bed. Applied Mechanics and Materials . (Submitted)

Gooroochurn, Mahendra and Kerr, David and Bouazza-Marouf, Kaddour and Ovinis, Mark (2011) Facial recognition techniques applied to the automated registration of patients in the emergency treatment of head injuries. Journal of Engineering in Medicine .

Gooroochurn, Mahendra and Ovinis, Mark and Kerr, David and Bouazza-Marouf, Kaddour (2009) Preoperative to Intraoperative Space Registration for Management of Head Injuries. In: International Conference on Image Processing.

Gooroochurn, Mahendra and Ovinis, Mark and Kerr, David and Bouazza-Marouf, Kaddour and Vloeberghs, Michael (2009) A registration framework for preoperative CT to intraoperative white light images. In: Medical Image Understanding and Analysis.

Grosskreutz, J.C. and Bowles, C.Q. and Wahab, A.A. (1992) Observations of slip patterns on the surface of fatigued gold using the scanning tunnelling microscope. Journal of Materials Science, 27 (21). pp. 5756-5764. ISSN 1573-4803

Guangul, F. M. and Sulaiman, S. A. (2013) Mitigation of Bridging Problem in Biomass Gasification by a Novel Approach. [Citation Index Journal]

Guangul, F. M. and Sulaiman, S. A. (2012) A Novel Approach for Solving the Problem of Bridging in Fixed Bed Gasifiers. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Guangul, F. M. and Sulaiman, S. A. and Moni, M. N. Z. and Atnaw, Samson Mekbib and Konda, R. E. (2013) Determination of the Equilibrium Moisture Content of Oil Palm Fronds Feedstock for Gasification Proces. [Citation Index Journal]

Guangul, F. M. and Sulaiman, S. A. and Moni, M. N. Z. and Atnaw, Samson Mekbib and Konda, R. E. (2012) Investigation of the Hygroscopic Property of Oil Palm Fronds for Gasification Process. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Guangul, F. M. and Sulaiman, S. A. and Raghavan, V. R. (2011) Elemental and Thermo-Chemical Analysis of Oil Palm Fronds for Biomass Energy Conversion. In: 4th International Meeting on Advances in Thermofluids (IMAT), Melaka.

Guangul, F. M. and Sulaiman, S. A. and Raghavan, V. R. (2011) Gasification and Effect of Gasifying Temperature on Syngas Quality and Tar Generation. In: 4th International Meeting on Advances in Thermofluids (IMAT), Melaka.

Guangul, F. M. and Sulaiman, S. A. and Ramli, Anita (2012) Gasifier selection, design and gasification of oil palm fronds with preheated and unheated gasifying air. Bioresource Technology, 126 . pp. 224-232. ISSN 0960-8524

Guangul, F. M. and Sulaiman, S. A. and Ramli, Anita (2013) Temperature Profile and Producer Gas Composition of High Temperature Air Gasification of Oil Palm Fronds. In: 4th International Conference on Energy and Environment 2013 (ICEE 2013), Bangi.

H

H. , Hussin and M. , Muhammad and F.M. , Hashim and S.N. , Ibrahim (2010) A practical method for analyzing offshore gas compressor system maintenance data. In: IAENG Transactions on Engineering Technologies. American Institute of Physics (AIP), Melville, New York, pp. 207-221. ISBN 978-0-7354-0839-5

Habib, Khairul (2011) Performance evaluation of combined adsorption refrigeration cycles. International Journal of Refrigeration .

Habib, Khairul (2011) Study on Solar Powered Combined Adsorption Refrigeration Cycles in Malaysia. 4th International Meeting of Advances in Thermofluids . pp. 1123-1134. ISSN 978-967-0194-07-3

Habib, Khairul (2010) Experimental study on adsorption kinetics of activated carbon/R134a and activated carbon/R507A pairs. [Citation Index Journal]

Habib, Khairul (2013) Performance Study of Activated Carbon – Hydrofluoro Olefin based Adsorption Cooling System. [Citation Index Journal]

Habib, Khairul (2013) Performance Study of Waste Heat Driven Pressurized Adsorption Chiller. [Citation Index Journal]

Habib, Khairul and A Majid, M Amin and Sulaiman, S. A. (2013) Study on Two Stage Activated Carbon/HFC-134a Based Adsorption chiller. In: 4th International Conference on Energy and Environment 2013 (ICEE 2013), IOP Conf. Ser.: Earth Environ. Sci. , Bangi.

Habib, Khairul and ASSADI, M.KH (2015) Study of Solar Driven Silica gel-Water based Adsorption Chiller. [Citation Index Journal]

Habib, Khairul and Helder, Sitoi (2012) Thermodynamic Analysis of Ideal Adsorption Cooling System using Activated Carbon/N-Butane Pair. In: IEEE Conference on Sustainable Utilization and Development in Engineering and Technology, 6-9 October 2012, Kuala Lumpur.

Habib, Khairul and Saha, Bidyut B. (2013) Performance eveluation of solar driven activated carbon fiber-ethanol based adsorption cooling system in Malaysia. [Citation Index Journal]

Habib, Khairul and Saha, Bidyut B. (2013) Study on a solar heat driven dual-mode adsorption chiller. [Citation Index Journal]

Habib, Khairul and Saha, Bidyut B. and Chakraborty, A. and Oh, S.T. and Koyama, Shigeru (2013) Study on solar driven combined adsorption refrigeration cycles in tropical climate. [Citation Index Journal]

Habib, Khairul and Saha, Bidyut B. and Koyama, Shigeru (2014) Study of various adsorbenterefrigerant pairs for the application of solar driven adsorption cooling in tropical climates. Applied Thermal Engineering, 72 . pp. 266-274. ISSN 13594311

Habib, Khairul and Saha, Bidyut B. and Koyama, Shigeru and Gilani, Syed Ihtsham-ul-Haq and Sulaiman, S. A. (2013) STUDY OF VARIOUS ADSORBENT-REFRIGERANT PAIRS FOR THE APPLICATION OF SOLAR DRIVEN ADSORPTION COOLING IN TROPICAL CLIMATES. In: International Symposium on Innovative Materials for Processes in Energy Systems, 4,6 September, 2013, Fukuoka, Japan.

Hagos, F.Y. and Aziz, A. Rashid A. and Isa, M Tan (2011) Water-in-diesel emulsion and its micro-explosion phenomenon-review. In: Communication Software and Networks (ICCSN), 2011 IEEE 3rd International Conference , 27-29 May 2011 , Xi'an .

Hagos, F.Y. and Aziz, A. Rashid A. and Sulaiman, S. A. (2013) Early Flame Development Image Comparison of Low Calorific Value Syngas and CNG in DI SI Gas Engine. In: 4th International Conference on Energy and Environment 2013 (ICEE 2013), IOP Conf. Ser.: Earth Environ. Sci., Bangi.

Hagos, F.Y. and Aziz, A. Rashid A. and Sulaiman, S. A. (2012) Study of Syngas Combustion Parameters Effect in an Internal Combustion Engine. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Hagos, F.Y. and Aziz, A. Rashid A. and Sulaiman, S. A. (2013) Study of Syngas Combustion Parameters Effect on Internal Combustion Engine. [Citation Index Journal]

Hagos, F.Y. and Aziz, A. Rashid A. and Sulaiman, S. A. and Firmansyah, Firmansyah (2012) Combustion Characteristics of Late Injected CNG in a Spark Ignition Engine under Lean Operating Condition. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Halawa,, E. and Van Hoof, J. (2012) The adaptive approach to thermal comfort: A critical overview. Energy and Buildings, 51 . pp. 101-110. ISSN 0378-7788

Haravinthan , A and Ayob , MR and Salleh , S and Jaafar, A (2011) A Review on Prediction over pressured zone in hydrocarbon well using seismic travel time through artificial intelligence technique for pre-drilling planning. In: International Conference on Software Technology and Engineering, 2011, MALAYSIA.

Harun, H. A. and Buyamin, Norsheila and Othman, M. A. and Sulaiman, S. A. (2013) A Case Study on Indoor Comfort of Lecture Rooms in University Buildings. Applied Mechanics and Materials, 393 . pp. 821-826. ISSN 1660-9336

Hasan, Fawad and Pervaiz, Mughal and Mufti, Rizwan (2006) Parametric thermal analysis of a single molten metal droplet as applied to layered manufacturing. Heat and Mass Transfer, 42 . pp. 226-237.

Hasan, Nurul (2001) CFD analysis of the mixing zone for a submerged jet system. ASME Fluids Engineering . ISSN 0791835324

Hasan, Nurul (2010) Predicting The Nanoparticle Diffusion using Computational Fluid Dynamics (CFD). In: International Conference on Process Engineering and Advanced Materials (ICPEAM 2010), 15-17 June 2010, Kuala Lumpur Convention Centre.

Hasnain, S. A. and Nasif, M. S. and Pao, W. and Al-Waked, R. (2014) Numerical investigation on the effect of down stand structure in fire compartment on smoke contamination atrium upper balconies. [Citation Index Journal]

Hasnain, Syed Ali and Nasif, Mohammad Shakir and Pao, William K. S. and Al-Waked, Rafat (2014) Numerical investigation on the effect of down stand structure in fire compartment on smoke contamination atrium upper balconies. [Citation Index Journal]

Hassan, S. (2011) The Effects of Supercharging on the Performance and Exhaust Gas Emissions of a Dual-Fuel Engine Fueled with Producer Gas-Diesel and Palm Oil Blends. Middle-East Journal of Scientific Research, 7 (2). pp. 162-169. ISSN ISSN 1990-9233

Hassan, S. (2011) Effects of advanced injection timing on performance and emission of a supercharged dual-fuel diesel engine fueled by producer gas from downdraft gasifier. Journal of Scientific & Industrial Research, 70 . pp. 220-224.

Hassan, S. (2011) Performance and Emission Characteristics of Supercharged Biomass Producer Gas-Diesel Dual Fuel Engine. Journal of Applied Sciences, 11 (9). pp. 1606-1611. ISSN 1812-5654

Hassan, S. (2010) A Preliminary Investigation of Compressed Producer Gas from Downdraft Biomass Gasifier. Journal of Applied Sciences, 10 (5). pp. 406-412. ISSN 1812-5654

Hassan, Cik Suhana and Hussain, Patthi and Awang, Mokhtar (2011) Stress Analysis on Direct Joining of Sailon to AISI 430 Ferritic Stainless Steel. [Citation Index Journal]

How, MG and Hamdi, M. and Bin-Sudin, M. (2006) The Effect of Substrate Surface Roughness on Properties of Diamond-Like Carbon Coating. In: International Conference on Manufacturing and Materials Processing (ICMM), 14-15 March 2066, Kuala Lumpur.

Hudiyo, Firmanto and Patthi, Hussain and Mamat, Othman (2011) Suppression of Iron Silicide Formation in the Reaction Layer of Sialon – 7.5% Cr Ferritic Steel Joint. Defect and Diffusion Forum, 312-315 . pp. 888-893. ISSN 1662-9507

Hussain, P and Mamat, Othman and Firmanto, Hudiyo (2009) Solution nitriding of AISI 430 ferritic stainless steel. In: International Conference on Materials and Metallurgical Engineering, 23-25 June 2009, Sepuluh Nopember Institute of Tehnology, Surabaya, Indonesia.

Hussin, Hilmi and Arshad, Noreen Izza and Muhammad, Masdi (2008) Development of Knowledge Management System for Equipment Troubleshooting. In: International Conference on Plant Equipment and Reliability (ICPER), 27 March 2008, Subang Jaya.

Hussin, Hilmi and Hashim, F.M. (2011) Modelling of Maintenance Downtime Distribution Using Expert Opinion. [Citation Index Journal]

Hussin, Hilmi and Hashim, F.M. and Muhammad, Masdi and Ibrahim, S.N. (2010) A systematic approach of analysing offshore maintenance data. In: The International MultiConference of Engineers and Computer Scientists 2010 (IMECS) , March 2010, Hong Kong.

I

I. Shazi, Rahmat and M. Nor Azli, M. Farizal and M. Hashim, Fakhruldin (2003) Development of a Small-scale Solar Pond Technology Testbed for Education Purposes. In: Proceedings of the International Symposium & Exhibition on Renewable Energy 2003 , 14 – 17 Sept. 2003, Kuala Lumpur.

Ibrahim, Abdulwehab A. and Aziz, A. Rashid A. and Zainal Abidin, Ezrann Z. and Zulkifli, Saiful A. (2011) Operation of Free-Piston Linear-Generator Engine Using MOSFET and IGBT Drivers. [Citation Index Journal]

Ibrahim, A.B.A. and Aris, M.S. and Chin, Yee Sing (2012) Development of Fuel Briquettes from Dewatered Poultry Sludge. In: ICFEPES2012. (Submitted)

Ibrahim, Abdulwehab A. and Aziz, A. Rashid A. (2009) Dynamic And Thermodynamic Analysis of Two-Stoke, Dual Cylinder, Linear Combustion Engine. In: International Conference on Advances in Mechanical Engineering (ICAME 2009) , 24-25th June 2009, Shah Alam, Malaysia.

Ibrahim, Abdulwehab A. and Aziz, A. Rashid A. and Zainal Abidin, Ezrann Z. and Zulkifli, Saiful A. (2011) Operation of Free-Piston Linear-Generator Engine Using MOSFET and IGBT Drivers. [Citation Index Journal]

Ibrahim, Abdulwehab A. and Aziz, A. Rashid A. (2009) Modeling of Two Stroke, Dual Cylinder Free Piston Linear Generator Engine. In: National Postgraduate Conference on Engineering, Science and Technology (NCP 2009), 25-26th March 2009, UTP.

Ibrahim, I. and Abidin, K.A.Z. and Zainuddin, A. and Kamaruddin, T.N.A.T. (2011) Experimental Study of Exhaust Configurations on the Diesel Engine Performance. [Citation Index Journal]

Ibrahim, Idris (2008) RELIABILITY IMPACTS ON THE AVAILABILITY OF TURBINE DRIVEN POWER GENERATION FOR OFFSHORE PLATFORM IN MALAYSIA. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Ibrahim, M Yussoff and Khalid Ali, Khalidah and Abdul Karim, Z. A. (2009) Level of Business Acumen of UTP Interns – Students’ vs. Supervisors’ Perspectives. In: Regional Conference on The Humanities 2009, 18-19 Feb 2009, UTP.

Ibrahim, M.A. and Al-Kayiem, Hussain H. (2009) Prediction of Pressure Drop Correction to Suit Wax Deposition Modeling in Annular Test Section. PETRONAS TECHNOLOGY JOURNAL, 2 (spe (2). pp. 46-52. ISSN KDN: PP 15855/07/2009(021898)

Ibrahim, Taib and Wang, Jiabin and Howe, Dave and Mohd Nor, Nursyarizal (2010) Design and Optimisation of a Moving-Iron Linear Permanent Magnet Motor for Reciprocating Compressors using Finite Element Analysis. [Citation Index Journal]

Iffa, Emishaw D. and Abdul Kadir, Amirruddin and Sulaiman, S. A. and Aziz, A. Rashid A. (2009) Gasoline-Ethanol (Gasohol) Fuel Blend Spray Characterization using Digital Imaging and Image Processing. In: IEEE International Conference on Signal and Image Processing Applications (ICSIPA), Kuala Lumpur.

Iffa, Emishaw D. and Aziz, A. Rashid A. and Malik, Aamir S. (2010) 3D Time Resolved Temperature and Concentration Measurement Using Background Oriented Schlieren Technique. In: 14th International Symposium on Flow Visualization (ISFV14), 21-24 June 2010, Daegu, Korea.

Iffa, Emishaw D. and Aziz, A. Rashid A. and Malik, Aamir S. (2010) Concentration Measurement of Injected Gaseous Fuel Using Quantitative Schlieren and Optical Tomography. [Citation Index Journal]

Iffa, Emishaw D. and Aziz, A. Rashid A. and Malik, Aamir S. (2010) Concentration measurement of injected gaseous fuel using quantitative schlieren and optical tomography. [Citation Index Journal]

Iffa, Emishaw D. and Aziz, A. Rashid A. and Malik, Aamir S. (2011) Velocity Field Measurement of a Round Jet Using Quantitative Schlieren. [Citation Index Journal]

Iffa, Emishaw D. and Aziz, A. Rashid A. and Malik , Aamir Saeed (2011) Velocity Field Measurement of a Round Jet using Quantitative Schlieren. Applied Optics, 50 (5). pp. 618-625.

Islamuddin, Azeemuddin and Al-Kayiem, Hussain H. and Gilani, Syed Ihtsham-ul-Haq (2013) Simulation of solar chimney power plant with an external heat source. [Citation Index Journal]

Ismail, F. B. and Al-Kayiem, Hussain H. (2010) Multidimensional Minimization Training Algorithms for Steam Boiler Drum Level Trip Using Artificial Intelligence Monitoring System. Proceedings of the 3rd International Conference on Intelligent and Advanced Systems (ICIAS2010) . ISSN ISBN:978-1-4244-6624-5

Ismail , F.B. and Al-Kayiem, Hussain H. (2009) Development of Hybrid Intelligent Systems for Boiler Fault Detection and Diagnosis. In: 1st National Post Graduate Conference, NPC09, 25-26 March 2009, Universiti Teknologi PETRONAS, Malaysia.

irshad, kashif and Habib, Khairul (2013) EFFECT OF DIFFERENT VIBRATION FREQUENCIES THROUGH TRACTOR ON MUSCLE ACTIVITY OF DRIVERS. [Non-Citation Index Journal]

irshad, kashif and Habib, Khairul and Nagarajan, T and Saha, Bidyut B. (2015) Performance analysis of a thermoelectric air duct system for energy-efficient buildings. Energy , 91 . pp. 1009-1017. ISSN 3605442

irshad, kashif and Habib, Khairul and Nagarajan, T and anas, elrayah ahmed (2013) Performance analysis of Photo Voltaic Trombe Wall for Tropical climate. [Citation Index Journal]

irshad, kashif and Habib, Khairul and T., Nagarajan (2013) Implementation of Photo Voltaic Trombe wall system for developing non-air conditioned Buildings. In: IEEE Conference on Sustainable Utilization and Development in Engineering and Technology, 2013, Selangor.

irshad, kashif and Habib, Khairul and basrawi, firdaus and Nagarajan, T and saidur, R and Saha, Bidyut B. (2015) Thermal comfort study of a building equipped with thermoelectric air duct system for tropical climate. Applied Thermal Engineering, 91 . pp. 1141-1155. ISSN 13594311

J

Jaafar, A and Escudier, Marcel and Poole, Robert (2007) Steady shear, small amplitude oscillatory shear and capillary break-up extensional rheology measurements of rod-like polymers. In: 4th Annual European Rheology Conference, 2007, Italy.

Jaafar, A and Escudier, Marcel and Poole, Robert (2010) Laminar, transitional and turbulent annular flow of drag-reducing polymer solutions. [Citation Index Journal]

Jaafar, A and Escudier, Marcel and Poole, Robert (2010) Laminar, transitional and turbulent annular flow of drag-reducing polymer solutions. [Citation Index Journal]

Jaafar, A and Escudier, Marcel and Poole, Robert (2010) Transition to turbulence in a concentric annular pipe. In: The 6th Annual European Rheology Conference, 7 - 9 April 2010, Sweden.

Jaafar, A and Escudier, Marcel and Poole, Robert (2008) Turbulent Pipe Flow of “Rod-Like” Polymer Solutions. In: The XVth International Congress on Rheology, 2008, Monterey, California.

Jaafar, A and Escudier, Marcel and Poole, Robert (2009) Turbulent pipe flow of a drag reducing, rigid “rod-like” polymer solution. J. Non-Newtonian Fluid Mech., 161 . pp. 86-93.

Jaafar, A and Poole, Robert (2010) Drag reduction of biopolymer flows. In: The 2nd International Conference on Plant Equipment and Reliability, June, 2010, Kuala Lumpur, Malaysia.

Jaafar, Azuraien and Escudier, Marcel and Poole, Robert (2010) Transition to turbulence in a concentric annular pipe. In: The 6th Annual European Rheology Conference, 7 - 9 April 2010, Sweden.

Jaafar, Azuraien and Poole, Robert (2010) Drag reduction of biopolymer flows. In: The 2nd International Conference on Plant Equipment and Reliability, June, 2010, Kuala Lumpur, Malaysia.

Jaafar, Azuraien and Poole, Robert (2011) Drag reduction of biopolymer flows. [Citation Index Journal]

Jalil, J. M. and Al-Kayiem, Hussain H. (2004) Experimental and Computational Evaluation of the Shear Layer Flow over Backward Facing Step. [Citation Index Journal]

Japper-Jaafar, Azuraien and Escudier, Marcel and Poole, Robert (2007) Steady shear, small amplitude oscillatory shear and capillary break-up extensional rheology measurements of rod-like polymers. In: 4th Annual European Rheology Conference, 2007, Italy.

Japper-Jaafar, Azuraien and Escudier, Marcel and Poole, Robert (2010) Laminar, transitional and turbulent annular flow of drag-reducing polymer solutions. [Citation Index Journal]

Japper-Jaafar, Azuraien and Escudier, Marcel and Poole, Robert (2008) Turbulent Pipe Flow of “Rod-Like” Polymer Solutions. In: The XVth International Congress on Rheology, 2008, Monterey, California.

Japper-Jaafar, Azuraien and Escudier, Marcel and Poole, Robert (2009) Turbulent pipe flow of a drag reducing, rigid “rod-like” polymer solution. J. Non-Newtonian Fluid Mech., 161 . pp. 86-93.

Joko , Joko and A Majid, M Amin (2011) Performance Evaluation of Stratified TES using Sigmoid Dose Response Function. [Citation Index Journal]

Junejo, Hasan Fawad (2007) The mechanical effects of deposition patterns in welding-based layered manufacturing. Proc. IMechE Vol. 221 Part B: J. Engineering Manufacture .

Juoi, Jariah and Arudra, , Dilip and Rosli, Zulkifli and Hussain, Kalthom and Japper-Jaafar, Azuraien (2013) Microstructural properties of glass composite material made from incinerated scheduled waste slag and soda lime silicate (SLS) waste glass. [Citation Index Journal]

K

K., Fuad and R.A., Siregar and M., Daimaruya (2007) Dynamic splitting-tensile test and numerical analysis for brittle materials. In: SOLID STATE SCIENCE AND TECHNOLOGY: 2nd International Conference on Solid State Science and Technology 2006, ICSSST 2006, 4 September 2006 through 6 September 2006, Kuala Terengganu.

K.V., Sreejaya and Al-Kayiem, Hussain H. and Gilani, S.I.U. (2011) Analytical Analysis of Roof Top Solar Chimney for Power Generation. [Citation Index Journal]

Kamarudin , Shehabuddeen and Fakhruldin, Bin Mohd Hashim (2010) Design of a Vertical Self-balancing Autonomous Underwater Vehicle. In: ICPER 2010.

Kareem, M. W. and Habib, Khairul and Gilani, Syed Ihtsham-ul-Haq (2013) Lumped Components Modeling of Double Pass Solar Collector with Porous Matrixes. [Citation Index Journal]

Kareem, M. W. and Habib, Khairul and Gilani, Syed Ihtsham-ul-Haq (2013) A Review of Solar Air Heater for Drying of Agricultural Products. In: International Manufacturing Engineering Conference (iMEC) 2013, July 1-3, 2013, Gambang, Kuantan, Malaysia.

Kareem, M. W. and Habib, Khairul and Ruslan, M. H. (2015) Numerical modelling of multi-pass solar dryer filled with granite pebbles for thermal storage enhancement. [Citation Index Journal]

Kareem, M. W. and Habib, Khairul and Sulaiman, S. A. (2013) Comparative Study of Single Pass Collector and Double Pass Solar Collector Filled with Porous Media. Asian Journal of Scientific Research, 6 (3). pp. 445-455. ISSN 19921454

Kareem, M. W. and Habib, Khairul and Sulaiman, S. A. (2012) Comparative Study of Single Pass and Double Pass Solar Collector Filled with Porous Media. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Kareem, M. W. and Habib, Khairul and irshad, kashif (2015) TRANSIENT MODELLING OF MULTI-PASS SOLAR THERMAL COLLECTOR WITH SENSIBLE ENERGY STORING MATRIX. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10200-10205. ISSN 1819-6608

Karuppanan, S and Hills, D (2007) Stress intensity factor for a crack within a strip under arbitrary loading. J. Strain Analysis , 42 . pp. 39-45.

Karuppanan , S and Churchman, C and Hills, D and Giner, E (2008) Sliding frictional contact between a square block and an elastically similar half-plane. European Journal of Mechanics A/Solids, 27 . pp. 443-459.

Karuppanan , S and Dini, D and Hills, D (2007) Fretting fatigue test analysis of contacts. Fatigue Fracture Engineering Materials Structure, 30 (6). pp. 499-509.

Karuppanan , S and Hills, D (2008) An edge dislocation in a semi-infinite elastic wedge. J. Strain Analysis, 43 . pp. 307-314. ISSN 0309-3247 (Print) 2041-3130 (Online)

Kaur, Harvin and Japper-Jaafar, Azuraien (2013) The Study of Drag Reduction ability of Naturally Produced Polymers from Local Plant Source. In: International Petroleum Technology Conference, China.

Kaur, Jaspreet and Jaafar, A (2012) Thixotropic behavior of a waxy crude oil from the Malay Basin. In: 8th International Materials Technology Conference and Exhibition, MALAYSIA.

Khalaji Assadi, Morteza (2014) Skylight Application for Natural Lighting in a Building; the University of Tehran Branch of Melli Bank Case Study. MATECWeb of Conferences13,06003, 13 .

Khalaji Assadi, Morteza (2014) Technical-Economic Analysis of Steam Double Effect Absorption Chiller-Heaters Equipped with Solar Heat Pipe System. Applied Mechanics and Materials, 465-46 . pp. 327-334.

Khalaji Assadi, Morteza (2011) An experimental and modeling study of a dehumidification tower. International Journal of the Physical Sciences, 6 (12). pp. 2852-2860. ISSN 1992 - 1950 ©2011 Academic Journals

Khalaji Assadi , Morteza (0011) Design, construction and performance testing of a new system for energy saving in rural buildings. Energy and Buildings, 43 . pp. 3303-3310.

Khalaji Assadi , Morteza and Habib, Khairul (2014) Solar Energy Potential Estimation in Perak Using Clearness Index and Artificial Neural Network. MATEC Web of Conferences, 3 .

KhalajiAssadi , Morteza and Safaei , Shervin (2016) Comparison of different neural network training algorithms for wind velocity forecasting. Applied Mechanics and Materials, 819 . pp. 346-350. ISSN 1662-7482

Khalik M., Sabil and Geert-Jan, Witkamp and Cor J., Peters (2010) Phase equilibria in ternary (carbon dioxide plus tetrahydrofuran plus water) system in hydrate-forming region: Effects of carbon dioxide concentration and the occurrence of pseudo-retrograde hydrate phenomenon. [Citation Index Journal]

Khan, Javed and Pao, William K. S. (2013) Horizontal Well Cleanup Operation using Foam in Different Coiled Tubing/Annulus Diameter Ratios. In: International Oil and Gas Symposium and Exhibition, 9-11 Oct 2013, Sabah.

Khan, Javed A and Pao, William K. S. (2013) Fill Removal with Foam in Horizontal Well Cleaning in Coiled Tubing. [Citation Index Journal]

Khan, Muhammad and Cooper, Dennis and Starr, Andrew (2007) Academic and commercial efforts in Wear Debris Analysis Automation (WDAA). Academic and commercial efforts in Wear Debris Analysis Automation (WDAA) .

Khan, Muhammad and Starr, Andrew (2006) Wear debris: basic features and machine health diagnostics. Wear debris: basic features and machine health diagnosis .

Khoo, Sze Wer and Karuppanan , S (2011) Stress Intensity Factor for Cracks Emanating from a Shaft. [Citation Index Journal]

Konda, R. E. and Sulaiman, S. A. and Ariwahjoedi, B. (2012) Syngas Production from Gasification of Oil Palm Fronds with an Updraft Gasifier. [Citation Index Journal]

Konda, R.E. and Sulaiman, S. A. and Ariwahjoedi, B. (2012) Syngas production from Gasification of Oil Palm Fronds with an Updraft Gasifier. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Kumar, S.G and Nagarajan, T and Srinivasa, Y.G (2009) Characterization of reconfigurable Stewart platform for contour generation. Robotics and Computer-Integrated Manufacturing, 25 (4-5). pp. 721-731. ISSN 07365845

Kuppan Chetty , RM and M, Singaperumal and T., Nagarajan (2011) Distributed planning and control of multirobot formations with navigation and obstacle avoidance. In: Recent Advances in Intelligent Computational Systems (RAICS), 2011 IEEE , Digital Object Identifier: 10.1109/RAICS.2011.6069385 .

Kuppan Chetty , RM and Singaperumal, M and Nagarajan, T (2011) Coordination Control of Wheeled Mobile Robots - A Hybrid Approach. International Journal of Computer Applications in Technology(IJCAT), 41 (3/4). pp. 195-204. ISSN ISSN (Online): 1741-5047 - ISSN (Print): 0952-8091

L

Lai, Kok Soon and Pao, William K. S. (2013) Assessment of Different Matrix-fracture Shape Factor in Double Porosity Medium. [Citation Index Journal]

Lewis, Roland W and Makurat, Axel and Pao, William (2003) Fully coupled modeling of seabed subsidence and reservoir compaction of North Sea oil fields. [Citation Index Journal]

Lewis, Roland W and Pao, William and Yang, Xin-she (2003) Finite element analysis and approximate estimation of the cross coupling effect in fractured reservoirs. GEOPHYSICAL RESEARCH LETTERS, 30 (14). pp. 1737-1740.

Lewis, Roland W and Pao, William (2002) Numerical Simulation of Three-Phase Flow in Deforming Three-Dimensional Fractured Reservoirs. Oil & Gas Science and Technology, 57 (5). pp. 499-514. ISSN 1294-4475

Lewis, Roland W and Pao, William and Yang, Xin-she (2004) Instability and reaction-di�usion transport of bacteria. COMMUNICATIONS IN NUMERICAL METHODS IN ENGINEERING, 20 . pp. 777-787. ISSN 1069-8299

Lin, R. J. T. and Mohd Sufian, S. S. and Abdullah , Mohamad Zaki and Bhattacharyya, Debes (2007) Processing and characterisation of PE/PET microfibrillar composites. In: 15th International Conference on Composites or Nano Engineering (ICCE-15), July 15-21, 2007, Haikou, Hainan Island, China.

M

M Juoi, , J and Arudra, , D and M Rosli, , Z and A Rahim, , T and Shamsuri, SR and Jaafar, A (2012) Physical and mechanical properties of glass composite material made from incinerated scheduled waste slag and SLS waste glass. In: International Conference on Advanced Materials Engineering and Technology, 2012, MALAYSIA.

M., Osman and T. , Nagarajan and Mohd Hashim, Fakhruldin (2011) Numerical Investigation of Pressure Drop in Hydraulic Spool Valve , ISSN . Journal of Solid State Science and Technology , 19 (2). pp. 48-60. ISSN 0128-7389

M., Syaifuddin and B.D., Le and T.T., Truong and H.T., Ngo and N.S., Mohd and C.W., Lee (2007) Designing 8 degrees of freedom humanoid robotic arm. In: 2007 International Conference on Intelligent and Advanced Systems, ICIAS 2007, 25 November 2007 through 28 November 2007, Kuala Lumpur.

M., Awang and V.H., Mucino (2009) Energy generation during friction stir spot welding (FSSW) of al 6061-T6 plates. In: Friction Stir Welding and Processing V -TMS 2009 Annual Meeting and Exhibition, 15 February 2009 through 19 February 2009, San Francisco, CA.

M., Sudin and A., Triwiyanto and S., Mridha and E., Haruman (2009) Thermochemical treatments of austenitic stainless steel in fluidised bed furnace for improved mechanical and ribological properties. [Citation Index Journal]

M. , Osman and T., Nagarajan and Mohd Hashim, Fakhruldin (2011) Numerical Study of Flow Field and Energy Loss in Hydraulic Proportional Control Valve. In: National Postgraduate conference NPC2011, September 19-20, 2011, UTP, Seri Iskandar, Perak, Malaysia.

M. Hashim, Fakhruldin (1997) An Approach in Teaching Creative Science & Technology Based Design Projects. In: Innovations in Science and Mathematics Curricula. University Brunei Darussalam Publisher, 125 -130.

M. Hashim, Fakhruldin (1998) Engineering terminology with definition for “PENEMPAAN” (FORGING). In: Ensiklopedia Sains dan Teknologi. DBP-UTM publication.

M. Hashim, Fakhruldin (1994) Narrowing the Gap Between Geometry and Function. In: International Conference on Computer Aided Geometric Design (CAGD), 4 - 8 July 1994, Penang.

M. Hashim, Fakhruldin and Hassan, Razali and Syed Hussin , Syed Zulkhieree and Seng Siew, Chuah (1995) Enhancing Productivity Through Computer-Based Simulation. In: Proceedings of the 1st. National CAD/CAM Conference, 10-12 October, 1995, Kuala Lumpur, Malaysia.

M. Hashim, Fakhruldin and P. Juster, Neal and Pennington, Alan de (1993) Generating Design Variants Based on Functional Reasoning. In: Proceeding of ICED ‘93. HEURISTA Publication, Switzerland, pp. 60-67.

M. Hashim, Fakhruldin and Debnath , Sujan (1996) PLASMAT & PLASPROS: Knowledge-based Materials and Process Selection for Plastic-based Technology. In: International Conference on Robotics, Vision, Parallel Processing and Industrial Automation (ROVPIA), 28 - 30 November, 1996, Ipoh, Malaysia .

M. Hashim, Fakhruldin and Nizam Ali, Mohammad and Salim , Mohd. Fadzil (1995) Penyenggaraan Cegahan Untuk Mesin Kawalan Berangka Berkomputer. In: Prosiding Seminar Kebangsaan Teknologi Makmal Ke-2, 21-22 November 1995, Univ. Teknologi Malaysia, Johor..

M. Hashim , Fakhruldin and Tarmizi Omar , Mohd. (2000) Towards a Cost Effective Manufacturing Process for the Production of In-house Metal Based Implants. In: Proceedings of the National Conference on Biomedical Engineering 2000, 27 – 28 Sept. 2000, Universiti Malaya, Kuala Lumpur, Malaysia .

M. Rafi Raza, Rafi and Faiz Ahmad , Faiz and N.Ikram, Nazma and R.Ahmad, Rafiq and A.salam, Salam (2011) Development and Working and Heat treatment strengthening of 2219 Aluminum alloy by mechanical working. [Citation Index Journal]

M. S., Pasricha and M. Hashim, Fakhruldin (2005) Analysis of Parametrically Excited Instability in Damped Torsional Vibrations of Diesel Engine Systems. In: Proceedings of the National Seminar on Advances in Noise, Vibration and Comfort (NVC2005), May 2005, Kuala Lumpur, Malaysia.

M.S. , Pasricha and Mohd Hashim, Fakhruldin (2006) Effect of the Reciprocating Mass of Slider-Crank Mechanism on Torsional Vibrations of Diesel Engine Systems. ASEAN Journal on Science and Technology for Development, 23 (1). pp. 71-81.

Maharun, Mui'nuddin and Baharom, Masri B and mohd, mohd syaifuddin (2013) Modelling and control of 4WD parallel split hybrid electric vehicle converted from a conventional vehicle. [Citation Index Journal]

Mahgoub, B. K. M. and Sulaiman, S. A. and Abdul Karim, Z. A. (2011) Emission of a Compression Ignition Engine Fuelled by Diesel and Imitated Syngas. In: 4th International Meeting on Advances in Thermofluids (IMAT), Melaka.

Mahgoub, B. K. M. and Sulaiman, S. A. and Abdul Karim, Z. A. (2013) Performance of a Compression Ignition Engine Fuelled by Diesel and Imitated Syngas. Asian Journal of Scientific Research, 6 (3). pp. 456-466. ISSN 19921454

Mahgoub, B. K. M. and Sulaiman, S. A. and Abdul Karim, Z. A. (2013) Performance of a Compression ignition Engine Fuelled by Diesel and Imitated Syngas. Asian Journal of Scientific Research, 6 (3). pp. 456-466. ISSN 1992-1454

Mahgoub, B. K. M. and Sulaiman, S. A. and Abdul Karim, Z. A. (2012) Performance of a compression ignition engine fuelled by diesel and imitated syngas. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Majid , Suhana Ab and Nazri, Azmarini A. and Sulaiman, S. A. (2013) Study on Indoor Air Quality of a Small Office in a Tropical Country. Applied Mechanics and Materials, 393 . pp. 827-831. ISSN 1660-9336

Mamat, O. and Ahmed, T. and Ariwahjoedi, B. (2011) Characterization and Properties of Copper-Silica Sand Nanoparticles Composites. Deffect and Diffusion Forum, 319-320 . pp. 95-105.

Mamat, Othman and Gebrehiwot, Tesfalidet (2009) Effect of Natural Sand on the Mechanical Properties of High Density polyethylene (HDPE) and Polypropylene (PP) Based Composites. In: International Conference on Mechanical Engineering 2009 UiTM, 24-25 June 2009, Concorde Hotel, Shah Alam, Selangor.

Mamat, Othman and B.I., Ugheoke and Ariwahjoedib, B. (2010) A brief survey of literature on Silica refractory research and development: a case for nanostructured silica obtained from rice husk ash (RHA). [Citation Index Journal] (In Press)

Mamat, Othman and Hussain, P and Mustapha, Mazli and Ismail, Fauzi (2008) Empirical Relationship Between Relative Electrical Conductivity And Relative Density Of The Al-Foam Fabricated Through Pressure Assisted Sintering/Dissolution Process. American Institute of Physics (AIP), Volume . pp. 310-314.

Mamat, Othman and Mustapha, Mazli and Ismail, Fauzi (2009) The Empirical Relationship Between Relative Electrical Conductivity And Relative Density Of The Al-Foam Fabricated Through Pressure Assisted Sintering/Dissolution Process. In: International Advanced of Technology Congress (ATCi),PWTC, Malaysia, 3-5 November 2009, PWTC, Kuala Lumpur,Malaysia.

Mamat, Othman and Oumer, A.N. (2011) Numerical simulation of fiber suspension in a two dimensional cavity. WORLD JOURNAL OF ENGINEERING, 8 (1). pp. 77-86. ISSN 1708-5284

Marneni, Narahari (2011) An Exact Solution of Unsteady MHD Free Convection Flow of a Radiating Gas Past an Infinite Inclined Isothermal Plate. In: 2011 2nd International Conference on Mechanical and Aerospace Engineering (ICMAE 2011), 29-31 July, 2011, Bangkok.

Marneni, Narahari (2011) MATHEMATICAL MODELING OF THERMAL RADIATION EFFECTS ON TRANSIENT GRAVITY-DRIVEN OPTICALLY THICK GRAY CONVECTION FLOW ALONG AN INCLINED PLANE WITH PRESSURE GRADIENT. Chemical Engineering Communications, 198 (12). pp. 1630-1644.

Marneni, Narahari (2011) A Mathematical Model for Residence Time Distribution Analysis in Swirling Fluidized Bed. In: National Postgraduate Conference on Energy & Sustainability: Exploring the Innovative Minds (NPC 2011), 19th -20th September 2011, Universiti Teknologi PETRONAS.

Marneni, Narahari (2010) Effects of Thermal Radiation and Free Convection Currents on the Unsteady Couette Flow Between Two Vertical Parallel Plates with Constant Heat Flux at one Boundary. [Citation Index Journal]

Marneni, Narahari (2012) Effects of thermal radiation and mass diffusion on free convection flow past an impulsively started infinite vertical plate with ramped temperature. [Citation Index Journal]

Marneni, Narahari (2011) Free Convection Flow Past an Impulsively Started Infinite Vertical Plate with Newtonian Heating in the Presence of thermal Radiation and Mass diffusion. [Citation Index Journal]

Marneni, Narahari (2011) Free convection flow and heat transfer between two vertical parallel plates with variable temperature at one boundary. ACTA Technica, 56 (1). pp. 103-113.

Marneni, Narahari (2011) Mathematical Modelling of Mass Transfer and Free Convection Current Effects on Unsteady Viscous Flow with Ramped Wall Temperature. [Citation Index Journal]

Marneni, Narahari (2009) Radiation Effects on Free Convection Flow past an Impulsively Started Infinite Vertical Plate with Ramped Wall Temperature and Constant Mass Diffusion. [Citation Index Journal]

Marneni, Narahari and Jaafar, A (2013) Free Convection Flow of a Nanofluid Past an Isothermal Inclined Plate. [Citation Index Journal]

Marneni, Narahari and Lokenath, Debnath (2013) Unsteady magnetohydrodynamic free convection flow past an accelerated vertical plate with constant heat flux and heat generation or absorption. [Citation Index Journal]

Marneni, Narahari and Pendyala, Rajashekhar (2014) Unsteady Magnetohydrodynamic Free Convection Flow of a Radiative Fluid past an Infinite Vertical Plate with Constant Heat and Mass Flux. [Citation Index Journal]

Marneni, Narahari and Pendyala, Rajashekhar and Nayan, M Yunus (2012) Newtonian Heating and Mass Transfer Effects on Free Convection Flow past an Accelerated Vertical Plate in the Presence of Thermal Radiation. [Citation Index Journal]

Marneni, Narahari and S.K., Ghosh and O., Anwar Bég (2013) A Study of Unsteady Rotating Hydromagnetic Free and Forced Convection in a Channel Subject to Forced Oscillation under an Oblique Magnetic Field. [Citation Index Journal]

Marneni, Narahari and Sulaiman, S. A. (2013) Thermal Radiation Effects on Unsteady MHD Natural Convection Flow Past an Infinite Inclined Plate with Ramped Temperature. Advanced Science Letters, 19 (1). pp. 296-300. ISSN 1936-6612

Marneni, Narahari and Sulaiman, S. A. (2013) Thermal Radiation Effects on Unsteady MHD Natural Convection Flow Past an Infinite Inclined Plate with Ramped Temperature. [Citation Index Journal]

Marneni, Narahari and Tippa, Sowmya and Pendyala, Rajashekhar (2013) Unsteady Magnetohydrodynamic Free Convection Flow of a Radiative Fluid past an Infinite Vertical Plate with Constant Heat and Mass Flux. [Citation Index Journal]

Marneni, Narahari and Yahya, Noorhana (2013) Effects of Time Dependent Temperature and Thermal Radiation on Free Convection Flow in Unsteady Couette Motion. [Citation Index Journal]

Masters, Ian and Pao, William K. S. and Lewis, Roland (2000) Coupling temperature to a double porosity model of deformable porous media. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 49 (3). pp. 421-438. ISSN 00295981

Mat Zain, R and Zainuddin, A (2008) Coordinated Control of the Dual Gantry-Tau Robot. In: ICPER 2008, 27 - 29 March 2008, Kuala Lumpur, Malaysia. (Submitted)

Megat-Yusoff, P.S.M. and Ahmad, Faiz and Amir, Norlaili and Leong, S.F. (2007) Effect of Particle Dispersion on Thermal Conductivity of Copper Powder Filled Epoxy Composites. International Conference on Advancement of Materials and Nanotechnology . UPENA, UiTM, Kuala Lumpur. ISBN 978-983-3644-95-7

Megat-Yusoff, Puteri Sri Melor (2009) Optimizing Neural Network Prediction of Composite Fatigue Life Under Variable Amplitude Loading Using Bayesian Regularization. In: Composite Materials Technology: Neural Network Applications. CRC Press, Boca Raton, Florida, USA, pp. 221-249. ISBN 9781420093322

Mekbib, S. and Sulaiman, S. A. (2009) Modeling and Simulation Study of Downdraft Gasifier Using Oil-Palm Fronds. In: International Conference on Energy and Environment, December 2009, Melaka.

Mekbib, S. and Sulaiman, S. A. (2012) Study on Pyrolysis Behavior of Oil-Palm Fronds. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Mohamed , M.F. and Al-Kayiem, Hussain H. (2009) Analytical Investigation on the Ribbed Double Pipe Heat Exchanger. In: National Postgraduate Conference, NPC09, 25-26 March 2009, Univeriti Teknologi PETRONAS, Tronoh, Malaysia.

Mohammadpour, Ehsan and Awang, Mokhtar (2011) Predicting the Young's Modulus of Single Walled Carbon Nanotubes using the Finite Element Modeling. [Citation Index Journal]

Mohammadpour, Ehsan and Mokhtar, Awang (2011) Predicting the nonlinear tensile behavior of carbon nanotubesusing finite element simulation. [Citation Index Journal]

Mohammed, Salah E. and Baharom, M.B. and A. Aziz, Abdul Rashid (2012) The effects of fuel-injection timing at medium injection pressure on the engine characteristics and emissions of a CNG-DI engine fueled by a small amount of hydrogen in CNG. [Citation Index Journal]

Mohammed, Salah E. and Iffa, Emishaw D. and Baharom, Masri and Aziz, A. Rashid A. (2010) Spray Characteristic Comparisons of Compressed Natural Gas and Hydrogen Fuel Using Digital Imaging. [Citation Index Journal]

Mohammed, Salah El. and Baharom, M.B. and A Aziz, A Rashid (2011) Analysis of Engine Characteristics and Emissions Fueled by In-situ mixing of Small amount of Hydrogen in CNG. [Citation Index Journal]

Mohd Nor, M. A. and Ibrahim, S and Sulaiman, S. A. and Aris, M. S. (2004) Modelling of Turbulence Premixed Combustion Relevant to Spark Ignition Engine. In: SOMCHE, December 2004, Tronoh.

Mohd Nor, Mohd Faizairi and Hassan, Suhaimi and Z.A, Zainal and M.A, Miskam (2010) Performance and Emission Characteristics of Supercharged Biomass Producer Gas-Diesel Dual Fuel Engine. [Citation Index Journal]

Mohideen, M. F. and Sreenivasan, B. and Sulaiman, S. A. and Raghavan, V. R. (2012) Heat transfer in a swirling fluidized bed with geldart type-D particles. Korean J. Chem. Eng., . pp. 1-6. ISSN ISSN: 0256-1115 (print version);ISSN: 1975-7220 (electronic version)

Mohmmed, A. O and Al-Kayiem , H. H. and Nasif, M. S. and Mohammed, Z. I (2014) Finite Element Analysis of Fatigue in Pipelines Due To Slug Flow. Advanced Materials Research, 845 . pp. 271-276.

Mokhlif, N. D. and Al-Kayiem, Hussain H. (2011) Modeling of the Waxing-dewaxing Process in Scraped Surface Exchangers. Journal of Applied Sciences, online . ISSN 18125654

Mokhlif, N. D. and Al-Kayiem , H. H. and Baharom, M.B. (2011) Numerical Model to Simulate Wax Crystallization in Scrapped Suface Heat Exchangers. In: IEEE Conference on Open Systems (ICOS) 2011.

Mokhtar, Ainul Akmar and che ismail, mokhtar and mohamad, masdi (2009) Comparative Study between Degradation Analysis and First Order Reliability Method for Assessing Piping Reliability for Risk-Based Inspection. [Citation Index Journal]

Mokhtar, Ainul Akmar and Hussin, Hilmi and Abdul Hamid, A.H. (2005) Performance Test Methodology for a 5-Axis Machining Center. In: National Conference on Advances in Mechanical Engineering 2005 (NAME' 05), May 18-20, 2005 , Kuala Lumpur.

Mokhtar, Ainul Akmar and Che Ismail, Mokhtar and Muhammad , Masdi and Hussin, Hilmi (2012) Assessing Piping Failure Probability subject to Corrosion under Insulation using Markov Model. In: 2012 The 3rd International Conference on Production, Energy and Reliability (ICPER), 12 - 14 June, 2012, Kuala Lumpur Convention Center, Kuala Lumpur, Malaysia.

Moni, M. N. Z. and Sulaiman, S. A. (2009) Development of a Biomass Downdraft Gasifier for Oil Palm Fronds. In: National Postgraduate Conference on Engineering, Science and Technology, March 2009, Tronoh.

Moni, M. N. Z. and Sulaiman, S. A. (2012) Downdraft Gasification of Oil Palm Frond. Lambert Academic Publishing, Saarbrücken, Germany. ISBN 978-3-659-26503-7

Moni, M. N. Z. and Sulaiman, S. A. (2012) Downdraft Gasification of Oil Palm Frond: Effects of Temperature and Operation Time. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Moni, M. N. Z. and Sulaiman, S. A. (2012) Downdraft Gasification of Oil Palm Frond: Effects of Temperature and Operation Time. [Citation Index Journal]

Moni, M. N. Z. and Sulaiman, S. A. (2012) Method of Processing Oil Palm Frond into Biomass Fuel for Downdraft Gasification. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Moni, M. N. Z. and Sulaiman, S. A. (2010) A Preliminary Study on Synthesis Gas Produced by Gasification of Oil Palm Fronds. In: International Conference on Plant Equipment and Reliability (ICPER), June 2010, Kuala Lumpur.

Muhammad, Masdi and A Majid, M Amin and Mokhtar, Ainul Akmar (2010) Reliability evaluation for a multi-state system subject to imperfect repair and maintenance. [Citation Index Journal]

Muhammad, Masdi and Abd Majid, M Amin (2011) Reliability and Availability Evaluation for a Multi-state System Subject to Minimal Repair. [Citation Index Journal]

Muhammad, Masdi and Abd Majid, M Amin and Ibrahim, Nurul Akma (2009) A CASE STUDY OF RELIABILITY ASSESSMENT FOR CENTRIFUGAL PUMPS IN A PETROCHEMICAL PLANT. In: 4th World Congress on Engineering Asset Management, 28-30 September 2009, Athen, Greece.

Muhammad, Masdi and Hussin, Hilmi and Ainul Akmar, Ainul Akmar and Abdul Majid, Mohd Amin (2012) Reliability Assessment of a Repairable System Based on Performance data. In: 2012 The 3rd International Conference on Production, Energy and Reliability (ICPER2012), 12-14 June 2012, Kuala Lumpur Convention Centre.

Muhammad, R. and Ariffin, S. Z. S. T. and Manaf, N. A. and Sulaiman, S. A. (2012) Study on the Effectiveness Rule-of-Thumb Method in Sizing of Air-Conditioning Systems. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Muhammadpour, Ehsan and Awang, MOkhtar (2010) Predicting a Stretching Behavior of Carbon Nanotubes using Finite Element Method. AIP Conference Proceedings . pp. 374-376. ISSN 0094243X

Muhammed, Salah Eldin and Baharom, Masri B and A Aziz, A Rashid (2011) Spray Characteristic Comparisons of Compressed Natural Gas and Hydrogen Fuel using Digital Imaging. [Citation Index Journal]

Mustaffa, Z. and Shams , Gholamreza and van Gelder, Pieter (2009) Evaluating the Characteristics of Marine Pipelines Inspection Data Using Probabilistic Approach. Proceedings of the 7th International Probabilistic Workshop . pp. 451-464.

Mustapha, Mazli and Mamat, Othman and Hussain, P (2010) Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process. [Citation Index Journal]

Mustapha, Faizal and Mustapha, Mazli and Mamat, Othman and Hussain, P and Noorsal, Kartini (2010) Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process. [Citation Index Journal]

Mustapha, M. and Mustapha, F. and Mamat, O. and Hussain, P. (2011) Fabrication of aluminium foam through pressure assisted high frequency induction heated sintering dissolution process: an experimental observation. Powder Metallurgy, 54 (3). pp. 343-353. ISSN 1743-2901

N

Nanimina, A.M. and Abdul-Rani, A.M. and Ahmad, F. and Zainuddin , A. and Lo, S.H.J. (2011) Effects of Electro-discharge Machining on Aluminium Metal Matrix Composite. [Citation Index Journal]

Nasir, Meseret and A. Majid, Mohd Amin (2012) Failure Cost Model for a Multi-State Electricity Supply System with Main Utility as Redundancy. In: 2012 The 3rd International Conference on Production, Energy and Reliability (ICPER2012), 12-14 June 2012, Kuala Lumpur Convention Center.

Nasir Rashid, Meseret and Abd Majid, Mohd Amin (2011) A Multi-state Reliability Model for a Gas Fueled Cogenerated Power Plant. [Citation Index Journal]

Nasir Reshid , Meseret and Abd Majid , Mohd Amin (2010) A Multi-State Reliability Model for a Gas Fueled Cogenerated Power Plant. In: International Conference on Plant Equipment and Reliability (ICPER 2010), Kuala Lumpur, Malaysia , 15-17 June 2010, Kuala Lumpur, Malaysia.

Naz, Muhammad Yasin and Sulaiman, S. A. and Ariwahjoedi, B. (2013) Experimental Study of Airless Spray Jet Breakup at Elevated Temperature and Pressure. Applied Mechanics and Materials, 393 . pp. 711-716. ISSN 1660-9336

Naz, Muhammad Yasin and Sulaiman, S. A. and Ariwahjoedi, B. and Ku Shaari, Ku Zilati (2013) Investigation of Vortex Clouds and Droplet Sizes in Heated Water Spray Patterns Generated by Axi-Symmetric Full Cone Nozzles. [Citation Index Journal]

Naz, Muhammad Yasin and Sulaiman, S. A. and Bambang Ari, Wahjoedi and Ku Shaari, Ku Zilati (2013) Visual Study of Hollow Cone Water Spray Jet Breakup Process at Elevated Temperatures and Pressures. [Citation Index Journal]

Naz, Muhammad Yasin and Sulaiman, S. A. and Bambang Ari, Wahjoedi and Ku Shaari, Ku Zilati (2014) Visual Study of Hollow Cone Water Spray Jet Breakup Process at Elevated Temperatures and Pressures. [Citation Index Journal]

Nazri, Azmarini A. and Majid, Suhana Ab. and Zakaria, Supaat Hj. and Sulaiman, S. A. (2013) A Study on IAQ in a Welding Laboratory. Applied Mechanics and Materials, 393 . pp. 947-952. ISSN 1660-9336

Nordin, Adzuieen and Abd Majid, Mohd Amin (2012) ASSIGNMENT MODEL FOR CHARGING OF THERMAL ENERGY STORAGE BY ELECTRIC CHILLERS USING ZERO-ONE PROGRAMMING APPROACH. In: 2012 The 3rd International Conference on Production, Energy and Reliability (ICPER2012), 12-14 June 2012, Kuala Lumpur Convention Center.

Nordin, Normayati and Abdul Karim, Z. A. and Othman, Safiah and Raghavan, V. R. (2013) Design and Development of Low Subsonic Wind Tunnel for Turning Diffuser Application. Advanced Materials Research, 614 . pp. 586-591. ISSN 1662-8985

Nordin, Normayati and Othman, Safiah and Raghavan, Vijay R. and Abdul Karim, Z. A. (2012) Verification of 3-D Stereoscopic PIV Operation and Procedures. [Citation Index Journal]

Nordin, Normayati and Raghavan, V. R. and Othman, Safiah and Abdul Karim, Z. A. (2012) COMPATIBILITY OF 3-D TURNING DIFFUSERS BY MEANS OF VARYING AREA RATIOS AND OUTLET-INLETCONFIGURATIONS. [Citation Index Journal]

Nordin, Normayati and Raghavan, Vijay R. and Othman, Safiah and Abdul Karim, Z. A. (2012) Numerical Investigation of Turning Diffuser Performance by Varying Geometric and Operating Parameters. Applied Mechanics and Materials, 229-31 . pp. 2086-2093. ISSN 1660-9336

Nugroho, G. and A.M.S., Ali and Abdul Karim, Z. A. (2010) PROPERTIES OF curl(phi) AND grad(phi)+curl(phi) CLASSES OF SOLUTION TO THE THREE-DIMENSIONAL INCOMPRESSIBLE NAVIER-STOKES EQUATIONS. International Journal of Applied Mathematics and Mechanics, 6 (11). pp. 98-117. ISSN 0973-0184

Nugroho, G. and Ali, A.M.S. and Abdul Karim, Z. A. (2009) On a Special Class of Analytical Solutions to the Three-Dimensional Incompressible Navier-Stokes Equations. Applied Mathematics Letters, 22 (11). pp. 1639-1644. ISSN 8939659

Nugroho, G. and Ali, A.M.S. and Abdul Karim, Z. A. (2009) Toward a New Simple Analytical Formulation of Navier Stokes Equations. International Journal of Mechanical Systems Science and Engineering, 1 (2). pp. 71-75. ISSN 2070-3929

Nugroho, Gunawan and A.M.S., Ali and Abdul Karim, Z. A. (2011) The Navier-Stokes Equations: On Special Classes and Properties of Exact Solutions of 3D Incompressible Flows. LAP LAMBERT Academic Publishing, Germany. ISBN 978-3838376943

Nugroho, G. and A.M.S., Ali and Abdul Karim, Z. A. (2008) Empirical Reaction and Diffusion Models for Large Eddy Simulation (LES) of Low Velocity Hydrogen Diffusion Flame. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Nugroho, Gunawan and A.M.S., Ali and Abdul Karim, Z. A. (2010) A CLASS OF EXACT SOLUTION TO THE THREE-DIMENSIONAL INCOMPRESSIBLE NAVIER-STOKES EQUATIONS. Applied Mathematics Letters, 23 (11). pp. 1388-1396. ISSN 8939659

Nugroho, Gunawan and Ali, A.M.S. and Abdul Karim, Z. A. (2010) A Short Review on the Analytical Methods in Fluid Dynamics Research: The Importance of Exact Solutions. In: 2nd International Conference on Plant Equipment and Reliability, 15-17 June 2010, Kuala Lumpur Convention Centre.

O

O. Abdalla, Mohamed and Nagarajan, T. and M. Hashim, Fakhruldin (2010) Numerical Investigation of Pressure Drop in Hydraulic Spool Valve. In: Proceedings of ICSSST2010, 3rd International Conference on Solid State Science & Technology, December 01-03, 2010, Kuching.

Okitsu, Jun and Naono, Ken and Sulaiman, S. A. and Zakaria, M.N. and Oxley, A. (2012) Towards Greening a Campus Grid: Free Cooling During Unsociable Hours. In: 2012 IEEE Conference on Control, Systems and Industrial Informatics (ICCSII), 23-26 September 2012, Bandung, Indonesia.

Othoman, M. A. and Kamal, S. N. O. and Zulkipli, M. Z. and Sulaiman, S. A. (2012) Occupants’ Workplace Satisfaction Following Implementation of Minimum Set Point Temperature Directive in Government Office Buildings. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Oumer, A.N. and Ali, A.M.S. and Mamat, O.B. (2009) Numerical Simulation of Fibre Orientation in Simple Injection Molding Processes. International Journal of Mechanical & Mechatronics Engineering, 09 (09). pp. 361-367. ISSN 2077-124X

Oumer, A.N. and Mamat, O. (2012) A study of fiber orientation in short fiber-reinforced composites with simultaneous mold filling and phase change effects. Composites Part B: Engineering .

Oumer, AN and Ali, A.M.S. and Mamat, O (2011) Numerical simulation of fiber suspension in a two dimensional cavity. [Citation Index Journal]

Ovinis, Mark (2010) Machine Vision for the Inspection of Surgical Tasks: Applications to Robotic Surgery Systems. In: International Conference on Machine Vision.

Ovinis, Mark and Kerr, David and Bouazza-Marouf, Kaddour and Vloeberghs, Michael (2010) Localisation of Anatomical Soft Tissue Landmarks of the Head in CT Images. In: International Conference on Machine Vision.

Owolabi, Afolabi L. and Hussain , H. Al-Kayiem and Baheta , Aklilu Tesfamichael (2016) Nanoadditives induced enhancement of the thermal properties of paraffin-based nanocomposites for thermal energy storage. Solar Energy , 135 .

P

P. Pancakarsa, Kresnajaya and Mohd Hashim , Fakhruldin (2007) Design of an Intelligent PIG for Deepwater Pipeline Maintenance. In: Conference on Application and Design in Mechanical Engineering (CADME), 25 – 26 Oct. 2007, Universiti Malaysia Perlis (UniMAP).

Panca Asmara, Yuli and Che Ismail, Mokhtar (2009) A Statistics Approach for the Prediction of CO2 Corrosion in Mixed Acid Gases. Corrosion and materials, 34 (4). pp. 25-30.

Pannu, Jaspreet and Jaafar, Azuraien and Sariman, M. Z. and Sulaiman, S. A. and Hizami, M. H. (2012) Thermal Shrinkage and Gas Void Formations of Waxy Crude Oil. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Pannu, Jaspreet and Japper-Jaafar, Azuraien (2013) Yield stress measurement and Thixotropic behavior of a waxy crude oil. In: International Petroleum Technology Conference, China.

Pao, William and Wong, Wallace and Lai, Adriana MK (2008) An explicit drive algorithm for aiding the design of firing sequence in side-drive micromotor. Communications in Numerical Methods in Engineering, 24 (12). pp. 2131-2136. ISSN 10698299

Pao, William and Ransing, Rajesh S and Lewis, Roland W (2005) A New Geometric Reasoning Technique for Hot Spot Prediction in Sand Casting. IEEE ECTI Transaction on Electrical Engineering, Electronics and Communications, 4 (1). pp. 34-38.

Pao, William and Ransing, Rajesh S and Lewis, Roland W and Lin, Chao (2003) A medial-axes-based interpolation method for solidification simulation. Finite Elements in Analysis and Design, 40 . pp. 577-593. ISSN 0168-874X

Pao, William and Hashim, Fakhruldin and Baheta, Aklilu Tesfamichael (2016) Hydrate Formation in Two Phase Flow in Pipe. Applied Mechanics and Materials, 819 . pp. 295-299.

Pao, William K. S. and Chen, Xiaohui and Lin, Chao (2012) Optimisation of Insulation Padding for Directional Solidification. In: ICPER 2012, 12-14 June 2012, KLCC.

Pao, William K. S. and Lewis, Roland W. and Masters, Ian (2001) A fully coupled hydro-thermo-poro-mechanical model for black oil reservoir simulation. INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, 25 . pp. 1229-1256. ISSN 0363-9061

Pao, William K. S. and Lewis , Roland W (2001) Numerical Simulation of Three-Phase Flow in Deforming Three-Dimensional Fractured Reservoirs. Computer Methods in Applied Mechanics and Engineering, 191 . pp. 2631-2659. ISSN 0045-7825

Pao, William K. S. and Lin, Chao (2012) Combining Expert Formula and Geometric Feature Extraction for Die Design. In: ICPER 2012, 12-14 June 2012, KLCC.

Pau, Jion Sean and Pao, William K. S. (2013) A Unified Adaptive Fanger’s Model for Thermal Comfort in Tropical Countries. [Citation Index Journal]

Pau, Jion Sean and Pao, William K. S. and Kee, Keh Kim (2013) A Modified Fanger’s Model for Malaysia Climate. In: Engineering Conference 2013, 1-4 July 2013, Kuching, Sarawak.

Pau, Jion Sean and Pao, William K. S. and Sulaiman, S. A. and Halawa, Edward (2013) Adaptive Fanger’s Model for Optimum Thermal Comfort Setting for Lecture Halls in Malaysia. [Non-Citation Index Journal]

Pendyala, Rajashekhar and Marneni, Narahari (2013) Settling Characteristics of Alumina Nanoparticles in Ethanol-Water Mixtures. [Citation Index Journal]

Pisol Mat Isa , Muhammad and M. Hashim, Fakhruldin (2005) Pendidikan Islam Dalam Arus Moden: Kajian Cadangan Pendekatan Pengajian Akidah Kepada Pelajar Kejuruteraan. In: Prosiding Pendidikan Islam Ke Arah Kemanusiaan Sejagat, June 2005 , Melaka, Malaysia .

Pradhan, M.K. and Biswas, C.K. (2009) Modeling and analysis of process parameters on Surface Roughness in EDM of AISI D2 tool steel by RSM approach. World Academy of Science, Engineering and Technology, 33 . pp. 814-819.

Pradhan, M.K. and Biswas, C.K. (2011) Multi-response optimisation of EDM of AISI D2 tool steel using response surface methodology. International Journal of Machining and Machinability of Materials, 9 (1-2). pp. 66-85.

Pradhan, M.K. and Biswas, C.K. (2010) Neuro-fuzzy and neural network-based prediction of various responses in electrical discharge machining of AISI D2 steel. International Journal of Advanced Manufacturing Technology, 50 (5-8). pp. 591-610.

Pradhan, M.K. and Biswas, C.K. (2009) Neuro-fuzzy model and regression model a comparison study of MRR in electrical discharge machining of D2 tool steel. World Academy of Science, Engineering and Technology, 33 . pp. 796-801.

Pradhan, M.K. and Das, R. and Biswas, C.K. (2009) Comparisons of neural network models on surface roughness in electrical discharge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (7). pp. 801-808.

R

R , Devarajan and S, Mahendran and Abdul Karim, Z.A. and T, Nagarajan (2011) Design of Valveless Micropump using Preliminary Characteristics from Fluid Flow. Journal of Applied Sciences . ISSN 1812-5654

R.M. , Kuppan Chetty and M, Singaperumal and T, Nagarajan (2011) Distributed Formation Planning and Navigation Framework for Wheeled Mobile Robots. Journal of Applied Sciences . ISSN 18125654

RM, Kuppan Chetty and M, Singaperumal and T., Nagarajan (2010) Behaviour based planning and control of leader follower formation in wheeled mobile robots. Int. Journal of Advanced Mechatronic Systems, 2 (4). pp. 281-296. ISSN ISSN (Online): 1756-8420 - ISSN (Print): 1756-8412

Ransing, Rajesh S and Pao, William and Lin, Chao and Sood, Minkesh P and Lewis, Roland W (2004) Enhanced medial axis interpolation algorithm and its application to hotspot prediction in a mould–casting assembly. [Citation Index Journal]

Ransing, Rajesh S and Sood, Minkesh P and Pao, William (2005) Computer implementation of Heuver circle method for thermal optimisation in castings. [Citation Index Journal]

Raza, M.R. and Ahmad, F. and Mamat, O. and Omar, M.A. and German, RM and Muhsan, A.S. (2012) Effects of Sintering Temperature and Cooling Rate on Mechanical Properties of Powder Injection Molded 316L Stainless Steel. Solid State Phenomena, 185 . pp. 102-105.

Razali Muhamad, Mohd. and M. Hashim, Fakhruldin and Mohamad Bali Mohamad, Bashir and Ghazali, Zakri (2003) Project Planning Through Functional Modellng Approach. In: Seminar Pengurusan Projek Peringkat Kebangsaan, 26 – 28 Jun 2001, Langkawi, Malaysia .

Razali Muhammad , Mohd. and M. Hashim, Fakhruldin (1996) Penggunaan Quality Function Deployment (QFD) Sebagai Suatu Kaedah Pengurusan Kualiti Menyeluruh (TQM) Dalam Universiti. In: Konvensyen Kualiti, Univ. Sains Malaysia, Penang., 15 - 16 October 1996.

Riza, R and Ariwahjoedi, B. and Sulaiman, S. A. (2011) On the Numerical Exploration of Zero-Dimensional Greenhouse Model using Newton-Raphson and Steepest Descent Methods. [Citation Index Journal]

Riza, R and Ariwahjoedi, B. and Sulaiman, S. A. (2011) Preliminary Study of the Zero-Dimensional Climate Modeling by Using Numerical Method. In: 3rd National Postgraduate Conference, Tronoh.

Riza, R and Ariwahjoedi, B. and Sulaiman, S. A. (2013) Solar Radiation Simulation by Using Zero-dimensional Climate Model. [Citation Index Journal]

Riza, R and Ariwahjoedi, B. and Sulaiman, S. A. (2012) Solar Variation in the Zero-Dimensional Climates Model: A Numerical Experiment. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

S

S, Krishna and T, Nagarajan and A.M.A., Rani (2011) Review of Current Development of Pneumatic Artificial Muscle. Journal of Applied Sciences . ISSN 18125654

S , Krishnan and T, Nagarajan and Ahmad Majdi , Abdul Rani and TVVLN, Rao (2012) Silk Pneumatic Artificial Muscle (SPAM) construction for bio-medical engineering application. In: Business Engineering and Industrial Applications Colloquium (BEIAC), 2012 IEEE.

S , Krishnan and T, Nagarajan and Ahmad Majdi , Abdul Rani and TVVLN, Rao (2012) Silk Pneumatic Artificial Muscle (SPAM) construction for bio-medical engineering application. In: Business Engineering and Industrial Applications Colloquium (BEIAC), 2012 IEEE.

S Ariffin, S Amer and Nordin, Adzuieen and Buyamin, Norsheila and A Majid, M Amin (2013) Performance Analysis of Absorption and Electric Chillers At Gas District Cooling. [Citation Index Journal]

S., Karuppanan and A.G., Philipps and C.M., Churchman and D.A., Hills (2008) Crack tip stress intensity factors for a crack emanating from a sharp notch. Engineering Fracture Mechanics, 75 (18). pp. 5134-5139. ISSN 137944

S., Karuppanan and A.G., Philipps and N., Banerjee and D.A., Hills (2009) Crack tip stress intensity factors for a crack emanating from a semi-infinite notch with application to the avoidance of fatigue in complete contacts. [Citation Index Journal]

S., Karuppanan and D.A., Hills (2008) Frictional complete contacts between elastically similar bodies subject to normal and shear load. [Citation Index Journal]

S., Karuppanan and D.A., Hills (2008) Sliding of general frictional complete contacts. [Citation Index Journal]

S. Amear , S. Ariffin and Nordin, Adzuieen and Buyamin, Norsheila and Abd Majid, Mohd Amin (2012) Performance Analysis of Absorption and Electric Chillers At Gas District Cooling. In: 2012 The 3rd International Conference on Production, Energy and Reliability (ICPER2012), 12-14 June 2012, Kuala Lumpur Convention Center.

S.A., Sulaiman and Hussain, Haizatul H. and Leh, N. S. H. N. and Razali, M. S. I. (2011) Effects of Dust on the Performance of PV Panels. [Citation Index Journal]

SK, Ghosh and OA, Beg and M, Narahari (2009) Hall effects on MHD flow in a rotating system with heat transfer characteristics. MECCANICA , 44 (6 ). pp. 741-765. ISSN 0025-6455

Saad , Nordin and Wahyunggoro, Oyas. (2010) Nordin Saad and Oyas Wahyunggoro (2010). Development of Fuzzy-Logic-Based Self Tuning PI Controller for Servomotor, Advanced Strategies for Robot Manipulators, S. Ehsan Shafiei (Ed.), ISBN: 978-953-307-099-5, Sciyo, Available from: http://www.intechopen.com/articles/show/title/development-of-fuzzy-logic-based-self-tuning-pi-controller-for-servomotor. In: Advanced Strategies for Robot Manipulators. IN-TECH Sciyo, Crotia, pp. 311-328. ISBN 978-953-307-099-5

Sadig, Hussain and Sulaiman, S. A. and Ibrahim, Idris (2014) Exergy Analysis of a Micro-Gas Turbine Fueled with Syngas. [Citation Index Journal]

Sadig, Hussain and Sulaiman, S. A. and Ibrahim, Idris (2014) Exergy Analysis of a Micro-Gas Turbine Fueled with Syngas. [Citation Index Journal]

Sadig, Hussain and Sulaiman, S. A. and Ibrahim, Idris (2013) Experimental Investigation of A Twin Shaft Micro Gas-Turbine System. In: 4th International Conference on Energy and Environment 2013 (ICEE 2013), Bangi.

Sadig, Hussain and Sulaiman, S. A. and Ibrahim, Idris (2013) Simulation of Performance and Emissions of a Small Scale Gas Turbine Fueled by Syngas. In: IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA 2013), September 22-25, 2013, Kuching.

Sagu, Ollivia L and Pao, William K. S. (2013) In-situ Stress Perturbation due to Temperature around Borehole during Carbon Injection. [Citation Index Journal]

Sahirman, Sidharta and Saparso, . and Sarjito, Agus and Awang, Mokhtar and Abdul Karim, Z. A. and Sulaiman, S. A. (2012) Economic Viability Study of Palm-Oil Biodiesel. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Said, M. A. M. and Mubin, M. A. and Sulaiman, S. A. and Shazi, R. I. (2009) Experimental Investigation of an Air Enhancement Device on the Performance of a Spark Ignition Engine. IEM Journal, 72 . pp. 9-14. ISSN 0126-513X

Sandeep, k and Awang, Mariyamni and Jaafar, A (2012) Comparison of performance of worm-like micellar and polymer solutions in chemical EOR. In: International Conference on Integrated Petroleum Engineering and Geoscience, MALAYSIA.

Shaharin A, Sulaiman and Mohd Amin, Abd Majid (2011) Gas District Cooling in Malaysia. LAMBERT Academic Publishing, Saarbrücken, Germany. ISBN ISBN 978-3-8465-5441-8

Shazi, Rahmat and Husiran , M. Faisal and Mohd Hashim , Fakhruldin (2005) Modelling the Internal Flow of a Scaled-up Diesel Injector Using ANSYS Flotran. In: The 5th ANSYS Asean User Conference, April 2005, Singapore.

Shehabuddeen, Kamaruddin and Mohd Hashim, Fakhruldin (2007) Recent Developments in Autonomous Underwater Vehicle (AUV) Control Systems. In: Proceedings of the 5th PetroMin Deepwater & Subsea and Underwater Technology Conference, 29 – 30 Oct 2007, Kuala Lumpur, Malaysia.

Shehabuddeen, Kamarudin and Mohd Hashim, Fakhruldin (2009) Tilt Control for Vertical Self-balancing Autonomous Underwater Vehicle. In: 7th PetroMin Deepwater Technology Asia Conference & Exhibition, 26th – 27th October 2009, Kuala Lumpur, Malaysia.

Shiraz, Mohd. Aris (2012) Experimental Investigation on the Performance Enhancement of Integrated PCM-Flat Plate Solar Collector. Experimental Investigation on the Performance Enhancement of Integrated PCM-Flat Plate Solar Collector .

Shiraz, Mohd. Aris (2001) Jet Impingement Cooling Of Microelectronic Systems. In: ECCOMAS Conferens , 4-7 Sept 2001, Swansea, UK.

Shiraz, Mohd. Aris and Chin, Yee Sing (2006) BIOMASS FUEL BRIQUETTE FROM OIL PALM SHELL AND FIBER WITH WASTE PAPER. In: 16th International Invention Innovation Industrial Design & Technology Exhibition 2005, 19th - 21st May 2005, Kuala Lumpur.

Shiraz, Mohd. Aris and Chin, Yee Sing (2005) ENERGY FROM WASTE DEVELOPMENT OF FUEL BRIQUETTES FROM AGRICULTURAL WASTE. In: 16th International Invention Innovation Industrial Design & Technology Exhibition 2005, 19th - 21st May 2005, Kuala Lumpur.

Shiraz, Mohd. Aris and Chin, Yee Sing (2012) An Experimental Investigation on the Handling and Storage Properties of Biomass Fuel Briquettes Made from Oil Palm Mill Residues. An Experimental Investigation on the Handling and Storage Properties of Biomass Fuel Briquettes Made from Oil Palm Mill Residues .

Shiraz, Mohd. Aris and Shaharin A, Sulaiman (2004) MODELLING OF TURBULENCE PREMIXED COMBUSTION RELEVANT TO SPARK IGNITION ENGINE. In: SOMCHE, December 2004, Tronoh.

Shiraz, Mohd. Aris and Syed Ihtsham-ul-Haq, Gilani and Dimas, F.A (2011) hourly solar radiation estimation from limited meteorological data to complete nissing solar radiation data. In: 2011 International Conference on Environment Science and Engineering, 2011, IACSIT Press, Singapore.

Sim, K. Y. and Pao, William and Lin, C (2006) Metamorphic Testing Using Geometric Interrogation Technique and Its Application. IEEE ECTI Transaction on Computer and Information Technology, 1 (2). pp. 91-95.

Singh, Gurbinder and Mamat, Othman (2011) Effect of Conduction Pre-heating in Au-Al Thermosonic Wire Bonding. [Citation Index Journal]

Sreejaya , K.V. and Al-Kayiem, Hussain H. (2009) Review on Enhancement Techniques of the Roof Top Solar Chimneys. In: National Postgraduate Conference, NPC09, 25-26 March 2009, Universiti Teknologi PETRONAS, Tronoh, Malaysia.

Suhaimi, Hassan and Baheta, Aklilu Tesfamichael (2015) Experimental investigation on heat transfer enhancement by using porous twisted plate as an inserts in a fitted tube. ARPN Journal of Engineering and Applied Sciences, 10 (21). ISSN 1819-6608

Sulaiman, S. A. and Abdul Karim, Z. A. and Said, M. A. M. and Shazi, R. I. and Lawes, M. (2007) Light Extinction Technique for Measurements of Droplets in a Quiescent Fuel-Air Aerosol Mixture. In: Curtin University of Technology Sarawak Engineering Conference (CUTSE), November 2007, Miri, Sarawak.

Sulaiman, S. A. and Abdul Rani, A. M. and Lawes, M. (2008) Digital Post Processing Technique of Spherically Propagating Laminar Flames of Fuel-Air Mixtures. In: 2nd Engineering Conference on Sustainability, December 2008, Kuching, Malaysia.

Sulaiman, S. A. and Koon, T. H. and Sing, C. Y. and Lee, Anjuna and Fee, N. L. (2004) Calculation of Air-Conditioning Cooling Load Using Database Programming. IEM Perak Annual Magazine . pp. 22-26.

Sulaiman, S. A. and Lawes, M. and Marquez, N (2005) On Instabilities and Flame Structures of Laminar Aerosol Flames. In: European Combustion Meeting, April 2005, Louvain-la-Neuve, Belgium.

Sulaiman, S. A. and Lawes, M. (2007) Burning Rate and Regimes of Spherically Propagating Laminar Flames of Iso-Octane-Air Aerosol Mixtures. In: 6th Asia-Pacifc Conference on Combustion, May 2007, Nagoya, Japan.

Sulaiman, S. A. and Lawes, M. (2009) Burning Rates of Turbulent Gaseous and Aerosol Flames. [Citation Index Journal]

Sulaiman, S. A. and Lawes, M. (2008) The Effect of Droplets on Natural Convection in Very Rich Iso-Octane-Air Flames. In: 13th International Conference on Applied Mechanics and Mechanical Engineering, Cairo, Egypt.

Sulaiman, S. A. and Lawes, M. (2008) High-Speed Schlieren Imaging and Post-Processing for Investigation of Flame Propagation within Droplet-Vapour-Air Fuel Mixtures. IEM Journal, 69 (1). pp. 53-60. ISSN 0126-513X

Sulaiman, S. A. and Lawes, M. and Atzler, F. and Woolley, R. (2006) Effect of Droplets on the Flame Speed of Laminar Iso-octane and Air Aerosols. In: 10th International Congress on Liquid Atomization and Spray Systems, ICLASS, August 2006, Kyoto.

Sulaiman, S. A. and Lawes, M. and Hassan, S. and Abdul Karim, Z. A. (2007) High-Speed Schlieren Imaging of Spherically Propagating Laminar Flames of Iso-Octane-Air Aerosol Mixtures. In: 3rd World Engineering Congress, Penang, August 2007, Penang, Malaysia.

Sulaiman, S. A. and Xiong, C. Y. and Sing, C. Y. and Abdul Rani, A. M. (2008) Experimental Simulation on the Effect of Leakage of Steam to the Heat Rate of a Plant. In: 2nd Engineering Conference on Sustainablilty Engineering, December 2008, Kuching, Malaysia.

Sulaiman, S. A. and Atnaw, S. M. and Moni, M. N. Z. (2011) A Preliminary Study of Oil Palm Fronds for Gasification Process. In: Power and Energy Systems (EuroPES 2011), 22-24 June 2011, Crete, Greece.

Sulaiman, S. A. (2003) Applications of Laser Doppler Anemometer and Phase Doppler Anemometer System for Engineering Researches. IEM Perak Annual Magazine . pp. 20-25.

Sulaiman, S. A. (2002) The Effects of Horizontal Mounting Position of Atomizer in a Confined Tube to Spray Angles. In: World Engineering Congress 2002, July 2002, Kuching, Malaysia.

Sulaiman, S. A. and A Majid, M Amin (2011) Gas District Cooling in Malaysia. Lambert Academic Publishing, Saarbrücken, Germany. ISBN 978-3-8465-5441-8

Sulaiman, S. A. and A Majid, M Amin (2011) Overview of Gas District Cooling in Malaysia. In: Gas District Cooling in Malaysia. Lambert Academic Publishing, Saarbrücken, Germany, pp. 19-40.

Sulaiman, S. A. and A Majid, M Amin and Aris, M.S. (2011) Introduction. In: Gas District Cooling in Malaysia. Lambert Academic Publishing, Saarbrücken, Germany. ISBN 978-3-8465-5441-8

Sulaiman, S. A. and Abdul Karim, Z. A. and Lawes, M. (2008) Laser Attenuation Technique for Measurements of Droplets in a Turbulent Fuel-Air Aerosol Mixture. In: International Conference on Mechanical and Manufacturing Engineering, May 2008, Johor Bahru, Malaysia.

Sulaiman, S. A. and Abdul Rahman, Khairil Ikhwan and Jasmani, Mohd Shahrizal (2013) Development of Gas Compressor Diagnostic Program Using Knowledge Based Management Concept. In: ASME 2013 International Mechanical Engineering Congress, 15-21 November 2013, San Diego, California.

Sulaiman, S. A. and Abdul Rani, A. M. and Lawes, M. (2008) Multiple Laser Attenuation Technique for Determination of Monodispersity within Suspended Droplet Clouds. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Sulaiman, S. A. and Ahmad, M. R. T. and Atnaw, Samson Mekbib (2011) Prediction of Biomass Conversion Process for Oil Palm Fronds in a Downdraft Gasifier. In: 4th International Meeting on Advances in Thermofluids (IMAT), Melaka.

Sulaiman, S. A. and Anas, M. I. (2012) Torrefaction of Oil Palm Fronds for Enhancement of Fuel Quality. Trends in Applied Sciences Research, 7 . pp. 248-255. ISSN 1819-3579

Sulaiman, S. A. and Atnaw, Samson Mekbib and Moni, M. N. Z. (2012) Experimental Study on Temperature Profile of Fixed-Bed Gasification of Oil-Palm Fronds. [Citation Index Journal]

Sulaiman, S. A. and Balamohan, S. and Moni, M. N. Z. and Mekbib, S. and Mohamed, Ahmed Osman (2010) Study on the Feasibility of Oil Palm-Fronds for Biomass Gasification. In: 5th International Ege Energy Symposium and Exhibition, June 2010, Denizli, Turkey.

Sulaiman, S. A. and Balamohan, S. and Rangkuti, C. (2008) Studies on Suitability of Palm-Fronds for Biomass Gas Production. In: International Conference on Mechanical and Manufacturing Engineering, May 2008, Johor Bahru, Malaysia.

Sulaiman, S. A. and Basil, Sherrene C. and Dunggatt , Nelson S. and Hashim , Mohd Hafriz M. (2010) Automated Calculations for Improvement of Tank Inventory at Fuel Terminals. In: International Conference on Plant Equipment and Reliability (ICPER), June 2010, Kuala Lumpur.

Sulaiman, S. A. and Basil, Sherrene C. and Dunggatt , Nelson S. and Hashim , Mohd Hafriz M. (2011) Automated Calculations for Improvement of Tank Inventory at Fuel Terminals. [Citation Index Journal]

Sulaiman, S. A. and Daud, M. H. (2013) Comparative Study of Droplet Sizes of Water and Diesel Sprays. [Citation Index Journal]

Sulaiman, S. A. and Daud, M. H. (2012) On Droplet Sizes of Sprays of Different Liquids. In: 3rd International Conference on Production, Energy and Reiability, 12-14 June 2012, Kuala Lumpur.

Sulaiman, S. A. and Hassan, A. H. (2010) Analysis of Annual Cooling Energy Requirements for Glazed Academic Buildings. In: International Conference on Plant Equipment and Reliability (ICPER), June 2010, Kuala Lumpur.

Sulaiman, S. A. and Hassan, A. H. (2011) Analysis of Annual Cooling Energy Requirements for Glazed Academic Buildings. [Citation Index Journal]

Sulaiman, S. A. and Hassan, A. H. (2011) A Study on the Impact of Operational Behavior on Cooling Energy in Highly-Glazed Academic Buildings in a Tropical Country. Trends in Applied Sciences Research, 6 (11). pp. 1256-1269. ISSN 1819-3579

Sulaiman, S. A. and Horng, C. J. (2005) Determination of Drag and Lift using ANSYS CFD Flotran Simulation. In: 5th ASEAN ANSYS User Conference, April 2005, Singapore.

Sulaiman, S. A. and Hussain, Haizatul H. and Leh, N. S. H. N. and Razali, M. S. I. (2011) Effects of Dust on the Performance of PV Panels. [Citation Index Journal]

Sulaiman, S. A. and Isa, Nadra and Raskan, N. I. and Harun, N. F. (2012) Study of Indoor Air Quality in Academic Buildings of a University. In: 3rd International Conference on Mechanical & Manufacturing Engineering, 20-21 November 2012, Parit Raja, Malaysia.

Sulaiman, S. A. and Isa, Nadra and Raskan, N. I. and Harun, N. F. C. (2013) Study of Indoor Air Quality in Academic Buildings of a University. [Citation Index Journal]

Sulaiman, S. A. and Jamaludin, S. E. (2010) A Study on the Use of Orifice Plates as Steam Traps. In: International Conference on Plant Equipment and Reliability (ICPER), June 2010, Kuala Lumpur.

Sulaiman, S. A. and Kamarudin, N. A. Z. (2012) Study on Sizes of Bubbles Liquid Flow through a Vertical Pipe. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Sulaiman, S. A. and Karim, M. F. and Moni, M. N. Z. and Atnaw, Samson Mekbib (2012) Gasification Study of Different Plant - Based Biomass Materials. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Sulaiman, S. A. and Karim, M. F. and Moni, M. N. Z. and Atnaw, Samson Mekbib (2013) On Gasification of Different Tropical Plant-based Biomass Materials. [Citation Index Journal]

Sulaiman, S. A. and Kean, Chow Wai (2002) Demonstration of Flow Separation in Pipe Elbow Using ANSYS CFD Flotran for Fluid Mechanics Course. In: 4th ASEAN ANSYS User Conference, November 2002, Singapore.

Sulaiman, S. A. and Khatab, M. M. and Mahgoub, B. K. M. (2012) Effect of fuel additives on the performance of an internal combustion engine. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Sulaiman, S. A. and Minhat, M. (2011) Development of a Spark Electrode Ignition System for an Explosion Vessel. [Citation Index Journal]

Sulaiman, S. A. and Mohd-Nor, M. A. (2003) Combined Laser Doppler Anemometer and Phase Doppler Anemometer System for Thermofluids Research at UTP. In: ICAST 2003, August 2003, Kuala Lumpur.

Sulaiman, S. A. and Mujor, S. N. A. and Ariffin, S. Z. H. S. T. and Muhammad, R. and Manaf, N. A. (2012) A Study on Reduction of Cooling Energy in Glazed Buildings. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Sulaiman, S. A. and Murad, S. H. M. and Ibrahim, Idris and Abdul Karim, Z. A. (2010) STUDY OF FLOW IN AIR-INTAKE SYSTEM FOR A SINGLE-CYLINDER GO-KART ENGINE. [Citation Index Journal]

Sulaiman, S. A. and Rashid, M. S. A. and Hassan, A. H. (2011) Manipulation of Operating Configuration of Cool Air Supply in Buildings for Reduction of Cooling Energy. In: 4th International Meeting on Advances in Thermofluids (IMAT), Melaka.

Sulaiman, S. A. and Razali, Nor Hazwani Mat and Konda, R. E. and Atnaw, Samson Mekbib and Moni, M. N. Z. (2013) On Diversification Of Feedstock In Gasification Of Oil Palm Fronds. In: 2nd International Conference on Mechanical Engineering Research, 1-3 July 2013, Gambang, Malaysia.

Sulaiman, S. A. and Romli, R. (2011) Combustion Performance of Various Cellulosic Biomasses in a Gasifier-Based Cookstove. In: 4th International Meeting on Advances in Thermofluids (IMAT), Melaka.

Sulaiman, S. A. and Tambi, Fara Husna and Khamidi, M. Faris (2010) Reduction of Cooling Energy for Highly Glazed Buildings in Malaysia through Scheduled Start-up and Shutdown of Air-Conditioners. In: 5th International Ege Energy Symposium and Exhibition, June 2010, Denizli, Turkey.

Sulaiman, S. A. and Tamby, F. H. and Aris, M.S. (2011) Study on Pre-Occupancy Purging of Air for a Low Occupancy Office in a Tropical Country. In: 2nd International Conference on Advances in Energy Engineering (ICAEE 2011), 27-28 December 2011, Bangkok.

Sulaiman, S. A. and Tamby, F. H. and Aris, M.S. (2012) Study on pre-occupancy purging of air for a low occupancy office in a tropical country. Energy Procedia, 14 . pp. 818-823.

Sulaiman, Shaharin Anwar and Choi , Yee Xiong and Chin, Yee Sing and Ahmad Majdi , Abdul Rani (2008) 2nd Engineering Conference on Sustainable Engineering. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management, December 18 -19, 2008, Kuching, Sarawak, Malaysia.

T

T., V. V. L. N. Rao and A., M. A. Rani and T., Nagarajan and F., M. Hashim (2011) Analysis of Grooved Journal Bearing With Partial Slip Surface. In: Regional Tribology Conference (RTC) 2011, November 22-24, 2011, Langkawi, Malaysia.

T., Nagarajan and G.S., Kumar (2008) Experimental investigations on reconfigurable stewart platform for contour generation. In: 3rd International Conference on Sensing Technology, ICST 2008, 30 November 2008 through 3 December 2008, Tainan.

T., Nagarajan and P., Verma and D., Chatterjee (2009) Design and development of a modular valveless micropump on a printed circuit board for integrated electronic cooling. [Citation Index Journal]

T., V. V. L. N. Rao (2012) Stabilization of Journal Bearing Using Two-Layered Film Lubrication. [Citation Index Journal]

T., V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2012) Analysis of slider and journal bearing using partially textured slip surface. Tribology International , 56 . pp. 121-128. ISSN 0301-679X

T., V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2012) Partially Textured Slider and Journal Bearing Analysis. Jurnal Teknologi, 58 . pp. 77-84. ISSN 0127–9696

T., V. V. L. N. Rao and S., Sufian and N., M. Mohamed (2012) Analysis of Nanoparticle Additive Three-layered Journal Bearing. In: International Conference on Nanotechnology (ICONT) 2012, 30 May - 1 June, 2012, Kuantan, Malaysia.

T. , V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2011) Analysis of Partially Textured Slider and Journal Bearing. In: 4th International Meeting of Advances in Thermofluids (IMAT) 2011, October 3-4, 2011, Melaka, Malaysia.

T. , V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2012) Analysis of Journal Bearing Considering the Effects of Surface Layer and Couple Stress Fluids. In: 3rd International Conference on Production Energy and Reliability, 12-14 June, 2012, Kuala Lumpur, Malaysia.

T. , V. V. L. N. Rao (2012) Stability Characteristics of Misaligned Journal Bearing. Advances in Vibration Engineering, 11 (4). pp. 361-370.

T. , V. V. L. N. Rao and A. , M. A. Rani and T., Nagarajan and F. , M. Hashim (2011) ANALYSIS OF GROOVED JOURNAL BEARING WITH PARTIAL SLIP SURFACE. Engineering e-Transaction, 6 (2). pp. 183-190. ISSN 1823-6379

T. , V. V. L. N. Rao and A. , M. A. Rani and T., Nagarajan and F. , M. Hashim (2013) Analysis of Two-Layered Film Journal Bearing with Partial Slip Surface. In: International Manufacturing Engineering Conference (iMEC) 2013, July 1-3, 2013, Gambang, Kuantan, Malaysia. (In Press)

T. , V. V. L. N. Rao and A. , M. A. Rani and T., Nagarajan and F. , M. Hashim (2014) Analysis of couple stress fluid lubricated partially textured slip slider and journal bearing using narrow groove theory. [Citation Index Journal]

T. , V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2013) Analysis of Couple Stress Fluid Lubricated Journal Bearing with Partial Slip Surface. In: 2013 IEEE Business Engineering & Industrial Applications Colloquium (BEIAC), April 7-9, 2013, Langkawi, Malaysia.

T. , V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2013) Analysis of Journal Bearing Considering the Effects of Surface Layer and Couple Stress Fluids. [Citation Index Journal]

T. , V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2013) Analysis of Journal Bearing with Double-Layer Porous Lubricant Film: Influence of Surface Porous Layer Configuration. [Citation Index Journal]

T. , V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2012) Analysis of Two-layered Porous Journal Bearing using the Brinkman Model. In: 3rd International Conference on Production Energy and Reliability, 12-14 June, 2012, Kuala Lumpur, Malaysia.

T. , V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2013) Analysis of Two-layered Porous Journal Bearing using the Brinkman Model. [Citation Index Journal]

T. , V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2012) Load Capacity of Partially Textured Journal Bearing with Trapezoidal Recess. In: 3rd International Conference on Mechanical and Manufacturing Engineering, 20-21 November, 2012, UTHM.

T. , V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2013) Load Capacity of Partially Textured Journal Bearing with Trapezoidal Recess. [Citation Index Journal]

T. , V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2013) Load Capacity of Partially Textured Slip Parallel Slider and Concentric Journal Bearing Using Narrow Groove Theory. In: The Malaysia International Tribology Conference (MITC) 2013, Malaysia, November 18-20, 2013, Kota Kinabalu.

T. , V. V. L. N. Rao and S., Sufian and N., M. Mohamed (2013) Analysis of Electric Double Layer on Thin Film Lubrication with Partial Slip. In: BOND21, Joint International Conference on Nanoscience, Engineering, and Management, 19 - 21 August, 2013, Penang, Malaysia.

T. , V. V. L. N. Rao and S., Sufian and N., M. Mohamed (2012) Analysis of Nanoparticle Additive Couple Stress Fluids in Three-layered Journal Bearing. In: The 3rd ISESCO International Workshop and Conference on Nanotechnology, 5 - 7 December, 2012, UKM.

T. , V. V. L. N. Rao and S., Sufian and N., M. Mohamed (2013) Analysis of Nanoparticle Additive Couple Stress Fluids in Three-layered Journal Bearing. [Citation Index Journal]

Tan, Chee Sheng and Sulaiman, S. A. and Venkiteswaran, V. K. (2012) One-Dimensional Modeling of Hydrodynamics in a Swirling Fluidized Bed. [Citation Index Journal]

Trieu Minh, Vu and Awang, Mokhtar and Setyamartana, Parman (2011) Conditions for Stabilizability of Linear Switched Systems. [Citation Index Journal]

U

Ugheoke, BI and Mamat, O. and Ariwahjoedi, B. (2010) A Brief Survey of the Literature on Silica Refractory Research and Development: The Case for Nanostructured Silica Obtained from Rice Husk Ash (RHA). Diffusion and Defect Data. Pt A Defect and Diffusion Forum, 307 . pp. 53-62. ISSN 10120386

V

V., Jha and A.A., Hon and A.G., Thomas and J.J.C., Busfield (2008) Modeling of the effect of rigid fillers on the stiffness of rubbers. [Citation Index Journal]

Vasant, Pandian (2008) AIP Conference Proceedings Volume 1052 INTERNATIONAL CONFERENCE ON POWER CONTROL AND OPTIMIZATION: Innovation in Power Control for Optimal Industry. American Institute of Physics. ISBN 978-0-7354-0581-3

Vasant, Pandian (2009) AIP Conference Proceedings Volume 1159 POWER CONTROL AND OPTIMIZATION: Proceedings of the Second Global Conference on Power Control and Optimization. American Institute of Physics. ISBN 978-0-7354-0696-4

Vasant, Pandian (2010) POWER CONTROL AND OPTIMIZATION: Proceedings of the 3rd Global Conference on Power Control and Optimization. American Institute of Physics, USA. ISBN 978-0-7354-0785-5

Venkiteswaran, V. K. and Goo, Jia Jun and Chin, Yee Sing and Sulaiman, S. A. and Raghavan, V. R. (2012) Effect of Particle Shape on Bed Pressure Drop in a Swirling Fluidized Bed. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Venkiteswaran, V. K. and Jun, G. J. and Chin, Yee Sing and Sulaiman, S. A. and Raghavan, V. R. (2012) Variation of Bed Pressure Drop with Particle Shapes in a Swirling Fluidized Bed. [Citation Index Journal]

Venkiteswaran, V. K. and Sulaiman, S. A. and Raghavan, V. R. (2013) Comparative Study of the Hydrodynamic Performance of Shorter and Longer Blades in a Swirling Fluidized Bed. In: International Conference on Future Energy & Materials Research (FEMR 2013), 1-2 June 2013, Singapore.

Venkiteswaran, V. K. and Sulaiman, S. A. and Raghavan, V. R. (2013) Comparative Study of the Hydrodynamic Performance of Shorter and Longer Blades in a Swirling Fluidized Bed. Advanced Materials Research, 772 . pp. 560-565. ISSN 1662-8985

Victor , Amirtham and T. , Nagarajan and Bin Mohd Hashim, Fakhruldin (2011) Wrist Motion Analysis Using SMA Actuation. In: CUTSE International Conference, 8-9 Nov, 2011 , Miri, Sarawak, Malaysia .

Vu, Trieu Minh and Ahmad Majdi , Abdul Rani (2009) Linear Quadratic State Feedback Design for Switched Linear Systems with Polytopic Uncertaities. [Citation Index Journal]

Vu, Trieu Minh and Fakhruldin, Bin Mohd Hashim (2010) Soft Switching System Based on Weighted Probabilities for Stochastic Hybrid Multiple Model-based Control Systems. [Citation Index Journal]

Vu, Trieu Minh (2011) CONTROL AND OPTIMIZAITON OF LINEAR SYSTEMS. In: PROCEEDINGS OF THE FOURTH GLOBAL CONFERENCE ON POWER CONTROL AND. AIP Conference Proceedings, 1337 (BVL72). AMER INST PHYSICS, 2 HUNTINGTON QUADRANGLE, STE 1NO1, MELVILLE, NY 11747-4501 USA, 2 HUNTINGTON QUADRANGLE, STE 1NO1, MELVILLE, NY 11747-4501 USA, pp. 108-112. ISBN 978-0-7354-0893-7

Vu, Trieu Minh (2011) Time Forward Observer Based Adaptive Controller for a Teleoperation System. INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS, 9 (3). pp. 470-477. ISSN 1598-6446

Vu, Trieu Minh and Idris, Bin Ibrahim (2010) RARX Estimator and Gain Scheduling Controller for On-line Fault Detection Controller. [Citation Index Journal]

Vu, Trieu Minh and Mokhtar, Awang and Setyamartana, Parman (2011) Conditions for Stabilizability of Linear Switched Systems. [Citation Index Journal]

Vu, Trieu Minh and Wan Mansor, Wan Muhamad (2010) Model Predictive Control of a Condensate Distillation Column. [Citation Index Journal]

W

Wahab, A.A. (2007) 3D Analysis of Creep Void Formation in Steam-Methane Reformer Tubes. PhD thesis, University of Canterbury, New Zealand.

Wahab, A.A. and Hutchinson, C.R. and Kral, M.V. (2006) A three-dimensional characterization of creep void formation in hydrogen reformer tubes. Scripta Materialia, 55 (1). pp. 69-73. ISSN 1359-6462

Wahab, A.A. and Kral, M.V (2008) A three dimensional view of high temperature creep damage. In: Materials Issues Governing the Performance of Advanced 21st Century Energy Systems. Science Reviews 2000, St Albans, pp. 191-194. ISBN 978-1900814430

Wahab, A.A. and Kral, M.V. (2005) 3D analysis of creep voids in hydrogen reformer tubes. Materials Science and Engineering: A, 412 (1-2). pp. 222-229. ISSN 0921-5093

Wahab, A.A. and Kral, M.V. (2005) Three-dimensional Analysis of Creep Voids. Microscopy and Microanalysis, 11 (Suppl 2). pp. 224-225. ISSN 1435-8115

Wahab, A.A. and Kral, M.V. (2007) A three dimensional view of high temperature creep damage. Materials at High Temperatures, 24 (4). pp. 299-302. ISSN ISSN 0960-3409

Wahab, A.A. and Abdul Latif, M.R. and Karuppanan , Saravanan and Abdul Aziz, Adam Hareezi (2011) Three-dimensional reconstruction of resin-infused carbon fiber reinforced polymer composite. [Citation Index Journal]

Waluyo, Joko and A Majid, M Amin (2012) DEVELOPMENT OF SIMULATION MODEL FOR CHARGING STRATIFIED TES TANK USING TEMPERATURE DISTRIBUTION ANALYSIS. In: 6th Symposium of SEATUC, King Mongkut’s University of Technology Thonburi, Bangkok, Thailand, 6-8 March 2012., 6-8 March 2012, King Mongkut’s University of Technology Thonburi, Bangkok, Thailand, 6-8 March 2012..

Waluyo, Joko and A. Majid, M. Amin (2010) Temperature Profile and Thermocline Thickness Evaluation of a Stratified Thermal Energy Storage Tank. [Citation Index Journal]

Waluyo, Joko and Abd Majid, Mohd Amin (2011) Performance Evaluation of Stratified TES using Sigmoid Dose Response Function. [Citation Index Journal]

Waluyo, Joko and Abd Majid, Mohd Amin (2010) Temperature Profile and Thermocline Thickness Evaluation of a Stratified Thermal Energy Storage Tank. [Citation Index Journal]

Wasiu, Saheed and Sulaiman, S. A. (2010) Effects of varying EGR rates on the nitric oxide (NOx) emissions. In: International Conference on Plant Equipment and Reliability (ICPER), June 2010, Kuala Lumpur.

Wasiu, Saheed and Sulaiman, S. A. and Aziz, A. Rashid A. (2011) An Experimental Study of Different Effects of EGR Rates on The Performance And Exhaust Emissions of The Stratified Charge Piston Direct Injection Compressed Natural Gas Engine. [Citation Index Journal]

Wassan, Rano Khan and Abd Majid, Mohd Amin and Mokhtar, Ainul Akmar (2014) Risk matrix model for rotating equipment. [Citation Index Journal]

Wassan, Rano Khan and Abd Majid, Mohd Amin and Mokhtar, Ainul Akmar (2014) Semi-quantitative Risk Assessment Matrix for Rotating Equipment. [Citation Index Journal]

Woldemichael, Dereje Engida and Jiun, Lai Jia and Debnath , Sujan (2013) Topology Optimization of Beam Structures with Various End and Loading Conditions. [Citation Index Journal] (In Press)

Woldemichael Engida , Dereje and Fakhruldin , Mohd Hashim and Sujan , Debnath (2011) A Knowledge-Based Conceptual Design Support System. Advanced Materials Research , 308 - 310 . pp. 1540-1545.

Woldeyohannes, Abraham D. and A. Majid, Mohd Amin (2011) Effect of age of Pipes on Performance of Natural Gas Transmission Pipeline Network System. [Citation Index Journal]

Woldeyohannes, Abraham D. and Abd Majid, Mohd Amin (2012) Analogical Approach for Optimizing Natural Gas Transmission Pipeline Network System. Advanced Materials Research, 361-36 . pp. 966-973. ISSN 1022-6680

Woldeyohannes, Abraham D. and Abd Majid, Mohd Amin (2011) Effects of Age of pipes on Performance of Natural Gas Transmission Pipeline Network System. [Citation Index Journal]

Woldeyohannes, Abraham D. and Woldemichael, Dereje Engida and Baheta, Aklilu Tesfamichael (2016) Sustainable Renewable Energy Resources Utilization in Rural Areas. Renewable & Sustainable Energy Reviews .

Woldeyohannes, Abraham Debebe and Abd Majid, Mohd Amin (2010) Simulation model for natural gas transmission pipeline network system. Simulation Modelling Practice and Theory, 19 (20 . pp. 196-212.

Wong, Dennis ML and Pao, William (2011) A genetic algorithm for optimizing gravity die casting’s heat transfer coefficients. Expert Systems with Applications, 38 (6). pp. 7076-7080. ISSN 09574174

Wong, Wallace and Pao, William and Holiday , D (2006) Minimal Controller Synthesis Adaptive Control for Direct Torque Controlled Induction Motor Drives. In: First International Power and Energy Conference PECon 2006, 28-29, November 2006, Putrajaya.

wassan, Majid Ali and Habib, Khairul and Khan, Rano (2013) PARAMETRIC ANALYSIS OF LITHIUM CHLORIDE (LICL) BASED MATHEMATICAL MODEL FOR THE DEHUMIDIFIER. [Non-Citation Index Journal]

wassan, Majid Ali and Habib, Khairul and Suhaimi, Hassan (2013) Mathematical Modeling for the Regenerator of Liquid Desiccant Airconditioning System. [Citation Index Journal]

wassan, majid ali and Habib, Khairul and Hassan, Suhaimi (2013) Mathematical modelling and simulation of the dehumidifier for the tropical region of Malaysia. In: IEEE Business, Engineering & Industrial Applications Colloqium, 2013, Langkawi.

Y

Yahya, Noorhana and Daud, Hanita and Marneni, Narahari (2013) Forward Modeling of Seabed Logging by Finite Integration and Finite Element Methods. In: Advanced Structured Materials. Springer, pp. 147-165.

Yazid, Edwar and Parman, Setyamartana and Fuad, Khairul (2009) Dynamic Response Of Guyed Crane Girder Structure Induced By Moving Loads. In: National Postgraduate Conference on Engineering, Science and Technology (NPC) 2009, 11-12 March 2009, Tronoh.

Yazid, Edwar and Parman, Setyamartana and Fuad, Khairul (2009) DYNAMIC RESPONSE OF A CRANE STRUCTURE INDUCED BY MOVING TROLLEY WITH SWINGING PAYLOAD. In: International Conference on Advances in Mechanical Engineering (ICAME) 2009 , 24-25 June 2009 , Shah Alam, Selangor, Malaysia.

Yong, Lawrence H. P. and Pao, William and Hashim, F.M. (2013) Fill Removal in Wellbore Using Coiled Tubing. [Citation Index Journal]

Yousif, Alaeldeen Altag and Sulaiman, S. A. (2013) Laminar Flame Speed of Methane-Air Mixtures at Atmospheric Conditions. In: 4th International Conference on Energy and Environment 2013 (ICEE 2013), Bangi.

Yunnus, Y. M. and Al-Kayiem, Hussain H. (2010) A HYBRID DRYER TO DRY SOLID WASTE. In: World Engineering Congress 2010, Conference on Natural resources and Green Technology, 2-5 August 2010, Kuching. Sarawak.

Yunus, Y. M. and Al-Kayiem, Hussain H. (2011) Design of a Biomass Burner/Gas-to-gas Heat Exchanger for Thermal Backup of a Solar Dryer. Journal of Applied Sciences, online . ISSN 18125654

Yunus, Muhamad and Shuib, Anis and Fawad , Hasan (2014) Numerical Simulation to Investigate the Effect of Non Newtonian Properties of Blood on Wall Shear Stress in Diseased Artery. [Citation Index Journal]

Yunus, Muhammad and Shuib, Anis and Fawad, Hasan (2013) Numerical Simulation to Investigate the Effect of Non Newtonian Properties of Blood on Wall Shear Stress in Diseased Artery. In: 4th International Conference on Mechanical and Manufacturing Engineering (ICME 2013), 17-18 December 2013, Putrajaya. (Submitted)

Z

Zin, Nurul Aisyah Mohd and Sulaiman, S. A. (2013) Operating Characteristics of Gasifier Cookstove Using Different Biomass Materials. Applied Mechanics and Materials, 393 . pp. 516-521. ISSN 1660-9336

Zulkifli, Saiful A. (2007) Modeling, Simulation and Implementation of Rectangular Current Commutation for Starting of a Free-Piston Linear Generator. Masters thesis, Universiti Teknologi PETRONAS.

This list was generated on Wed Jul 26 22:45:58 2017 MYT.