Items where Department / MOR is "Institute for Autonomous Systems" and Year is 2018

Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | W | Y | Z
Number of items: 75.

A

AL-Qutami, T.A. and Ibrahim, R. and Ismail, I. and Ishak, M.A. (2018) Virtual multiphase flow metering using diverse neural network ensemble and adaptive simulated annealing. Expert Systems with Applications, 93. pp. 72-85.

Abbas, M.K. and Tong, B. (2018) Context-aware based alert system for people with hearing impairments. Journal of Engineering and Applied Sciences, 13 (Specia). pp. 2309-2316.

Abdalla, E.A.H. and Nallagownden, P. and Nor, N.B.M. and Romlie, M.F. and Hassan, S.M. (2018) An application of a novel technique for assessing the operating performance of existing cooling systems on a university campus. Energies, 11 (4).

Abdalla, I.I. and Ibrahim, T. and Nor, N.M. (2018) Analysis of Tubular Linear Motors for Different Shapes of Magnets. IEEE Access, 6. pp. 10297-10310.

Abdul Aziz, N.H. and Ibrahim, Z. and Ab Aziz, N.A. and Mohamad, M.S. and Watada, J. (2018) Single-solution Simulated Kalman Filter algorithm for global optimisation problems. Sadhana - Academy Proceedings in Engineering Sciences, 43 (7).

Adamu, M. and Mohammed, B.S. and Liew, M.S. (2018) Effect of crumb rubber and nano silica on the creep and drying shrinkage of roller compacted concrete pavement. International Journal of GEOMATE, 15 (47). pp. 58-65.

Adamu, M. and Mohammed, B.S. and Shahir Liew, M. (2018) Mechanical properties and performance of high volume fly ash roller compacted concrete containing crumb rubber and nano silica. Construction and Building Materials, 171. pp. 521-538.

Ajab, H. and Dennis, J.O. and Abdullah, M.A. (2018) Synthesis and characterization of cellulose and hydroxyapatite-carbon electrode composite for trace plumbum ions detection and its validation in blood serum. International Journal of Biological Macromolecules, 113. pp. 376-385.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2018) Physical properties of the rubberized interlocking masonry brick. International Journal of Civil Engineering and Technology, 9 (6). pp. 656-664.

Ali, A. and Mohd Nor, N. and Ibrahim, T. and Fakhizan Romlie, M. (2018) Sizing and placement of solar photovoltaic plants by using time-series historical weather data. Journal of Renewable and Sustainable Energy, 10 (2).

Ali, A. and Nor, N.M. and Ibrahim, T. and Romlie, M.F. and Bingi, K. (2018) Big data storage for the modeling of historical time series solar irradiations. IGI Global, pp. 433-463.

Amin, A. and Basri, S. and Hassan, M.F. and Rehman, M. (2018) A snapshot of 26 years of research on creativity in software engineering - A systematic literature review. Lecture Notes in Electrical Engineering, 425. pp. 430-438.

Aslam, M. and Rahim, L.B.A. and Watada, J. and Hashmani, M. (2018) Clustering-based cloud migration strategies. Journal of Advanced Computational Intelligence and Intelligent Informatics, 22 (3). pp. 295-305.

B

Bahari, N.I.S. and Ahmad, A. and Aboobaider, B. and Bin Razali, M.F. and Sakidin, H. and Isa, M.S.M. and Ananta, G.P. and Sari, Y.A. and Sari, N.A. (2018) Remote sensing data restoration to compensate for haze effect. Journal of Theoretical and Applied Information Technology, 96 (1). pp. 118-126.

Bashiri, R. and Mohamed, N.M. and Suhaimi, N.A. and Shahid, M.U. and Kait, C.F. and Sufian, S. and Khatani, M. and Mumtaz, A. (2018) Photoelectrochemical water splitting with tailored TiO2/SrTiO3@g-C3N4 heterostructure nanorod in photoelectrochemical cell. Diamond and Related Materials, 85. pp. 5-12.

Basuwaqi, A.M. and Md Khir, M.H. and Ahmed, A.Y. and Rabih, A.A.S. and Mian, M.U. and Dennis, J.O. (2018) Effects of frequency and voltage on the output of CMOS-MEMS device. Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics, 2017-O. pp. 49-52.

Beer, M.I. and Hassan, M.F. (2018) Adaptive security architecture for protecting RESTful web services in enterprise computing environment. Service Oriented Computing and Applications, 12 (2). pp. 111-121.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. (2018) Fractional Order Set-point Weighted PID Controller for pH Neutralization Process Using Accelerated PSO Algorithm. Arabian Journal for Science and Engineering, 43 (6). pp. 2687-2701.

C

Chai, K. and Liew, M.S. and Lee, H.E. (2018) Numerical wave tank modelling of regular waves propagation using OpenFOAM. 3rd International Conference on Power Generation Systems and Renewable Energy Technologies, PGSRET 2017, 2018-J. pp. 1-6.

Chee, C.-H. and Jaafar, J. and Aziz, I.A. and Hasan, M.H. and Yeoh, W. (2018) Algorithms for frequent itemset mining: a literature review. Artificial Intelligence Review. pp. 1-19.

Cv, A. and Kannan, R. and Lei, H.J. and Setiawan, J.D. (2018) Design studies of inner and outer embedded Permanent Magnet for hybrid electric vehicles. MATEC Web of Conferences, 159.

D

Daneshpajouh, H. and Delisle, P. and Boisson, J.-C. and Krajecki, M. and Zakaria, N. (2018) Parallel batch self-organizing map on graphics processing unit using CUDA. Communications in Computer and Information Science, 796. pp. 87-100.

F

Faez, K.M. and Hamdavi, S. and Rao, T.V.V.L.N. and Ya, H.H. and Mohamed, N.M. (2018) Performance analysis of grooved hydrodynamic journal bearing with multi- depth textured surface. International Journal of Vehicle Structures and Systems, 10 (2). pp. 142-145.

G

Gilal, A.R. and Jaafar, J. and Capretz, L.F. and Omar, M. and Basri, S. and Aziz, I.A. (2018) Finding an effective classification technique to develop a software team composition model. Journal of Software: Evolution and Process, 30 (1).

H

Halim, A.H. and Ismail, I. (2018) Tree physiology optimization in constrained optimization problem. Telkomnika (Telecommunication Computing Electronics and Control), 16 (2). pp. 876-882.

Halim, A.H. and Ismail, I. (2018) Tree physiology optimization on SISO and MIMO PID control tuning. Neural Computing and Applications. pp. 1-11.

Haron, N. and Jaafar, J. and Aziz, I.A. and Hassan, M.H. and Shapiai, M.I. (2018) Data trustworthiness in Internet of Things: A taxonomy and future directions. 2017 IEEE Conference on Big Data and Analytics, ICBDA 2017, 2018-J. pp. 25-30.

Hashmani, M.A. and Abro, F.R. and Unar, M.A. and Watada, J. (2018) A novel algorithm to reduce peak-to-average power ratio of orthogonal frequency division multiplexing signals. Journal of Theoretical and Applied Information Technology, 96 (8). pp. 2106-2127.

I

Imran, M. and Liew, M.S. and Garcia, E.M. and Nasif, M.S. and Yassin, A.Y.M. and Niazi, U.M. (2018) Deformation and Heat Transfer on Three Sides Protected Beams under Fire Accident. IOP Conference Series: Earth and Environmental Science, 140 (1).

Ismail, O.A. and Mahmood, A.K. and Abdelmaboud, A. (2018) Factors influencing academic performance of students in blended and traditional domains. International Journal of Emerging Technologies in Learning, 13 (2). pp. 170-187.

J

Jahan, S. and Sakidin, H. and Nazar, R. and Pop, I. (2018) Analysis of heat transfer in nanofluid past a convectively heated permeable stretching/shrinking sheet with regression and stability analyses. Results in Physics, 10. pp. 395-405.

K

Kumar, M. and Das, B. and Nallagownden, P. and Elamvazuthi, I. and Khan, S.A. (2018) Optimal configuration of wind farms in radial distribution system using particle swarm optimization technique. Bulletin of Electrical Engineering and Informatics, 7 (2). pp. 286-293.

L

Lee, C.T. and Mohammad Rozali, N.E. and Klemeš, J.J. and Towprayoon, S. (2018) Advancing low-carbon emissions in Asia: mitigation of greenhouse gases and enhancing economic feasibility for major sectors. Clean Technologies and Environmental Policy, 20 (3). pp. 441-442.

Lee, C.T. and Mohammad Rozali, N.E. and Van Fan, Y. and Klemeš, J.J. and Towprayoon, S. (2018) Low-carbon emission development in Asia: energy sector, waste management and environmental management system. Clean Technologies and Environmental Policy, 20 (3). pp. 443-449.

M

Mahdi, F.P. and Vasant, P. and Abdullah-Al-Wadud, M. and Watada, J. and Kallimani, V. (2018) Quantum-Behaved Bat Algorithm for Combined Economic Emission Dispatch Problem with Valve-Point Effect. Lecture Notes in Electrical Engineering, 465. pp. 923-933.

Mahdi, F.P. and Vasant, P. and Abdullah-Al-Wadud, M. and Watada, J. and Kallimani, V. (2018) A quantum-inspired particle swarm optimization approach for environmental/economic power dispatch problem using cubic criterion function. International Transactions on Electrical Energy Systems, 28 (3).

Mahdi, F.P. and Vasant, P. and Kallimani, V. and Watada, J. and Fai, P.Y.S. and Abdullah-Al-Wadud, M. (2018) A holistic review on optimization strategies for combined economic emission dispatch problem. Renewable and Sustainable Energy Reviews, 81. pp. 3006-3020.

Matsumoto, Y. and Watada, J. (2018) Knowledge acquisition from rough sets using merged decision rules. Journal of Advanced Computational Intelligence and Intelligent Informatics, 22 (3). pp. 404-410.

Melo, H. and Zhang, H. and Vasant, P. and Watada, J. (2018) Training method for a feed forward neural network based on meta-heuristics. Smart Innovation, Systems and Technologies, 82. pp. 378-385.

Mohamed, N.M. and Bashiri, R. and Kait, C.F. and Sufian, S. (2018) Photocatalytic water splitting over titania supported copper and nickel oxide in photoelectrochemical cell; Optimization of photoconversion efficiency. IOP Conference Series: Materials Science and Engineering, 348 (1).

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the effect of crumb rubber and nano silica on the properties of high volume fly ash roller compacted concrete pavement using non-destructive techniques. Case Studies in Construction Materials, 8. pp. 380-391.

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the static and dynamic modulus of elasticity of roller compacted rubbercrete using response surface methodology. International Journal of GEOMATE, 14 (41). pp. 186-192.

Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. and Hoong, C.Y. and Adamu, M. (2018) Properties of nano-silica modified pervious concrete. Case Studies in Construction Materials, 8. pp. 409-422.

Mohammed, B.S. and Liew, M.S. and S Alaloul, W. and Al-Fakih, A. and Ibrahim, W. and Adamu, M. (2018) Development of rubberized geopolymer interlocking bricks. Case Studies in Construction Materials, 8. pp. 401-408.

Mumtaz, A. and Mohamed, N.M. and Irshad, M.I. and Yar, A. and Mohamed Saheed, M.S. (2018) Mutual effect of extrinsic defects and electronic carbon traps of M-TiO2 (M = V, Co, Ni) nanorod arrays on photoexcited charge extraction of CdS for superior photoelectrochemical activity of hydrogen production. International Journal of Hydrogen Energy, 43 (31). pp. 14388-14405.

N

Nurika, O. and Hassan, M.F. and Zakaria, N. and Jung, L.T. (2018) A study of fluctuations and confidence of implementation in genetic algorithm optimized network in data centre. Intelligent Decision Technologies, 12 (1). pp. 25-37.

O

Ooi, J.-O. and Hussin, F.A. and Zakaria, M.N. (2018) Fine-grained overhead characterisation of cross-ISA DBTO for multicore processor. Indonesian Journal of Electrical Engineering and Computer Science, 10 (3). pp. 1036-1044.

P

Pan, J.-S. and Tsai, P.-W. and Watada, J. and Jain, L.C. (2018) Preface. Smart Innovation, Systems and Technologies, 81. v-vi.

Paputungan, I.V. and Hani, A.F.M. and Hassan, M.F. and Asirvadam, V.S. (2018) Real-Time and Proactive SLA Renegotiation for a Cloud-Based System. IEEE Systems Journal.

Perumal, V. and Saheed, M.S.M. and Mohamed, N.M. and Saheed, M.S.M. and Murthe, S.S. and Gopinath, S.C.B. and Chiu, J.-M. (2018) Gold nanorod embedded novel 3D graphene nanocomposite for selective bio-capture in rapid detection of Mycobacterium tuberculosis. Biosensors and Bioelectronics, 116. pp. 116-122.

R

Radzi, S.S.M. and Asirvadam, V.S. and Hutapea, D.K.Y. and Dass, S.C. (2018) Comparison of EEG signals during alert and sleep inertia states using fractal dimension. Proceedings - 2018 IEEE 14th International Colloquium on Signal Processing and its Application, CSPA 2018. pp. 155-160.

Rasheed, W. and Bhatti, M.S. and Hisham Bin Hamid, N. and Tang, T.B. and Idris, Z. (2018) Moderate traumatic brain injury identification for MEG data using PU (Positive and Unseen) learning. Asia Pacific Conference on Postgraduate Research in Microelectronics and Electronics, 2017-O. pp. 25-28.

Razip, H. and Zakaria, M.N. (2018) Combining approximation algorithm with genetic algorithm at the initial population for NP-complete problem. IEEE Student Conference on Research and Development: Inspiring Technology for Humanity, SCOReD 2017 - Proceedings, 2018-J. pp. 98-103.

S

Salaam, H.A. and Taha, Z. and Tuan Ya, T. (2018) Multi Objective Optimization Using Genetic Algorithm of a Pneumatic Connector. IOP Conference Series: Materials Science and Engineering, 319 (1).

Samsudin, M.F.R. and Sufian, S. and Mohamed, N.M. and Bashiri, R. and Wolfe, F. and Ramli, R.M. (2018) Enhancement of hydrogen production over screen-printed TiO2/BiVO4 thin film in the photoelectrochemical cells. Materials Letters, 211. pp. 13-16.

Sethi, M.A.J. and Hussin, F.A. and Hamid, N.H. (2018) Bio-inspired network on chip having both guaranteed throughput and best effort services using fault-tolerant algorithm. IEEJ Transactions on Electrical and Electronic Engineering, 13 (8). pp. 1153-1162.

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. and Bakhsh, S.T. (2018) An Analytical and Experimental Approach to Diagnose Unbalanced Voltage Supply. Arabian Journal for Science and Engineering, 43 (6). pp. 2735-2746.

Syed, Z.I. and Liew, M.S. and Rahman, S.A. and Palaniandy, D.K. (2018) Evaluation of Failure Capacity of Offshore Riser Protectors Under Vessel Impact. Journal of Failure Analysis and Prevention, 18 (2). pp. 280-290.

Syed, Z.I. and Liew, M.S. and Rahman, S.A. and Palaniandy, D.K. (2018) Evaluation of Failure Capacity of Offshore Riser Protectors Under Vessel Impact. Journal of Failure Analysis and Prevention. pp. 1-11.

T

Tan, S.C. and Wang, S. and Watada, J. (2018) A self-adaptive class-imbalance TSK neural network with applications to semiconductor defects detection. Information Sciences, 427. pp. 1-17.

Thiruchelvam, L. and Dass, S.C. and Zaki, R. and Yahya, A. and Asirvadam, V.S. (2018) Correlation analysis of air pollutant index levels and dengue cases across five different zones in Selangor, Malaysia. Geospatial Health, 13 (1). pp. 102-109.

U

Uddin, M. and Romlie, M.F. and Abdullah, M.F. and Abd Halim, S. and Abu Bakar, A.H. and Chia Kwang, T. (2018) A review on peak load shaving strategies. Renewable and Sustainable Energy Reviews, 82. pp. 3323-3332.

Ullah, S. and Daud, H. and Dass, S.C. and Hadi, F.-T. and Khalil, A. (2018) An eigenspace approach for detecting multiple space-time disease clusters: Application to measles hotspots detection in khyber-pakhtunkhwa, Pakistan. PLoS ONE, 13 (6).

Ur Rehman, M.J. and Dass, S.C. and Asirvadam, V.S. (2018) A Bayesian parameter learning procedure for nonlinear dynamical systems via the ensemble Kalman filter. Proceedings - 2018 IEEE 14th International Colloquium on Signal Processing and its Application, CSPA 2018. pp. 161-166.

W

Wang, B. and Li, Y. and Wang, S. and Watada, J. (2018) A multi-objective portfolio selection model with fuzzy Value-at-Risk ratio. IEEE Transactions on Fuzzy Systems.

Watada, J. and Tan, S.C. and Matsumoto, Y. and Vasant, P. (2018) Rough set-based text mining from a large data repository of experts� diagnoses for power systems. Smart Innovation, Systems and Technologies, 73. pp. 136-144.

Watada, J. and Zhang, H. and Melo, H. and Sun, D. and Vasant, P. (2018) Boosted HOG features and its application on object movement detection. Smart Innovation, Systems and Technologies, 81. pp. 340-348.

Watada, J. and Zhang, H. and Melo, H. and Wang, J. and Vasant, P. (2018) SURF algorithm-based panoramic image mosaic application. Smart Innovation, Systems and Technologies, 81. pp. 349-358.

Y

Yuan, L.X. and Tan, S.C. and Goh, P.Y. and Lim, C.P. and Watada, J. (2018) Fuzzy ARTMAP with binary relevance for multi-label classification. Smart Innovation, Systems and Technologies, 73. pp. 127-135.

Z

Zabiri, H. and Marappagounder, R. and Ramli, N.M. (2018) Parallel based support vector regression for empirical modeling of nonlinear chemical process systems. Sains Malaysiana, 47 (3). pp. 635-643.

Zafar, R. and Kamel, N. and Naufal, M. and Malik, A.S. and Dass, S.C. and Ahmad, R.F. and Abdullah, J.M. and Reza, F. (2018) A study of decoding human brain activities from simultaneous data of EEG and fMRI using MVPA. Australasian Physical and Engineering Sciences in Medicine. pp. 1-13.

Zaidi, K.S. and Jeoti, V. and Drieberg, M. and Awang, A. and Iqbal, A. (2018) Fading Characteristics in Evaporation Duct: Fade Margin for a Wireless Link in the South China Sea. IEEE Access, 6. pp. 11038-11045.

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Shahid, M.U. (2018) Effect of paste viscosity on direct-current resistance in improving the efficiency of dye-sensitized solar cell. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 73-78.

Zhang, H. and Watada, J. (2018) Building fuzzy variance gamma option pricing models with jump levy process. Smart Innovation, Systems and Technologies, 73. pp. 105-116.

Zhang, H. and Watada, J. (2018) Fuzzy Levy-GJR-GARCH American option pricing model based on an infinite pure jump process. IEICE Transactions on Information and Systems, E101D (7). pp. 1843-1859.

This list was generated on Thu Apr 25 03:21:04 2024 +08.