Items where Department / MOR is "Institute for Contaminant Management" and Year is 2018

Group by: Creators | Item Type | No Grouping

Jump to: A | B | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | Y | Z

Number of items: 152.

A

Abd Ghani, N.A. and Azapour, A. and Syed Muhammad, A.F. and Abdullah, B. (2018) Dry reforming of methane for hydrogen production over Niâ��Co catalysts: Effect of Nbâ��Zr promoters. International Journal of Hydrogen Energy.

Abdalla, A.M. and Hossain, S. and Petra, P.M. and Ghasemi, M. and Azad, A.K. (2018) Achievements and trends of solid oxide fuel cells in clean energy field: a perspective review. Frontiers in Energy. pp. 1-24.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Dreisbach, F. and Keong, L.K. and Mellon, N. and Garg, S. (2018) Experimental measurements and modeling of supercritical CO2 adsorption on 13X and 5A zeolites. Journal of Natural Gas Science and Engineering, 50. pp. 115-127.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Keong, L.K. and Mellon, N. (2018) Total and partial uptakes of multicomponent vapor-gas mixtures on 13X zeolite at 343K: Experimental and modeling study. Microporous and Mesoporous Materials, 258. pp. 95-113.

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Mellon, N. and Keong, L.K. (2018) Adsorption of pure and predicted binary (CO2:CH4) mixtures on 13X-Zeolite: Equilibrium and kinetic properties at offshore conditions. Microporous and Mesoporous Materials, 267. pp. 221-234.

AbdulKareem, F.A. and Mohd. Shariff, A. and Ullah, S. and See, T.L. and Keong, L.K. and Mellon, N. (2018) Adsorption performance of 5A molecular sieve zeolite in water vaporâ��binary gas environment: Experimental and modeling evaluation. Journal of Industrial and Engineering Chemistry, 64. pp. 173-187.

Abdullah, M.A. and Mukhtar, H. and Fong, Y.Y. and Shaharun, M.S. and Mannan, H.A. (2018) Effect of TiO2 incorporation on separation performance of pure PES and PES/PVAc blend membranes. Materials Science Forum, 923 MS. pp. 35-39.

Adham Adnan, M. and Kee, K.-E. and Raja, P.B. and Ismail, M.C. and Kakooei, S. (2018) Influence of Heat Treatment on the Corrosion of Carbon Steel in Environment Containing Carbon Dioxide and Acetic Acid. IOP Conference Series: Materials Science and Engineering, 370 (1).

Aftab, A. and M. Shariff, A. and Garg, S. and Lal, B. and Shaikh, M.S. and Faiqa, N. (2018) Solubility of CO2 in aqueous sodium Î²-alaninate: Experimental study and modeling using Kent Eisenberg model. Chemical Engineering Research and Design, 131. pp. 385-392.

Ahmad, A. and Bhat, A.H. and Buang, A. (2018) Biosorption of transition metals by freely suspended and Ca-alginate immobilised with Chlorella vulgaris: Kinetic and equilibrium modeling. Journal of Cleaner Production, 171. pp. 1361-1375.

Ahmad, A. and Bhat, A.H. and Buang, A. (2018) Enhanced biosorption of transition metals by living Chlorella vulgaris immobilized in Ca-alginate beads. Environmental Technology (United Kingdom). pp. 1-17.

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Anwaar Asghar, H.M. and Bhattacharjee, S. (2018) Green synthesis of stabilized spherical shaped gold nanoparticles using novel aqueous Elaeis guineensis (oil palm) leaves extract. Journal of Molecular Structure, 1159. pp. 167-173.

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Asghar, H.M.A. and Bhattacharjee, S. (2018) Effect of volume of gold chloroauric acid on size, shape and stability of biosynthesized AuNPs using aqueous Elaeis guineensis (oil palm) leaves extract. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5135-5145.

Aleem, W. and Mellon, N. (2018) Model for the prediction of separation profile of oil-in-water emulsion. Journal of Dispersion Science and Technology, 39 (1). pp. 8-17.

Ali, A. and Maqsood, K. and Shin, L.P. and Sellappah, V. and Garg, S. and Shariff, A.B.M. and Ganguly, S. (2018) Synthesis and mixed integer programming based optimization of cryogenic packed bed pipeline network for purification of natural gas. Journal of Cleaner Production, 171. pp. 795-810.

Ali, M. and Yaacob, R.A.I.R. and Endut, M.N.A.-A. and Sulam, M. (2018) The influence of contents utility on students' use of social media. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 93-110.

Anjum, H. and Obaid, M.A. and Shamim, M.Y. and Murugesan, T. (2018) Adsorption of Benzene by "green" functionalization of Montmorillonite. MATEC Web of Conferences, 150.

Athar, M. and Shariff, A.M. and Buang, A. and Zaini, D. (2018) Integrated safety and process optimization approach for ammonia synthesis loop. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5074-5085.

Atkins, M. and de Haan, A.B. and Abdul Mutalib, M.I.B. and Jacquemin, J. (2018) Editorial special issue Separation and Purification Technology on ILSEPT-3. Separation and Purification Technology, 196. pp. 1-2.

Awad, A. and Masiran, N. and Abdus Salam, M. and Vo, D.-V.N. and Abdullah, B. (2018) Non-oxidative decomposition of methane/methanol mixture over mesoporous Ni-Cu/Al2O3 Co-doped catalysts. International Journal of Hydrogen Energy.

Azizan, M.T. and Mellon, N. and Ramli, R.M. and Yusup, S. (2018) Improving teamwork skills and enhancing deep learning via development of board game using cooperative learning method in Reaction Engineering course. Education for Chemical Engineers, 22. pp. 1-13.

B

Baig, Z. and Mamat, O. and Mustapha, M. (2018) Recent Progress on the Dispersion and the Strengthening Effect of Carbon Nanotubes and Graphene-Reinforced Metal Nanocomposites: A Review. Critical Reviews in Solid State and Materials Sciences, 43 (1). pp. 1-46.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Ali, S. and Sarfraz, M. (2018) Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear. International Journal of Minerals, Metallurgy and Materials, 25 (6). pp. 704-715.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Munir, K.S. and Sarfraz, M. (2018) Investigation of tip sonication effects on structural quality of graphene nanoplatelets (GNPs) for superior solvent dispersion. Ultrasonics Sonochemistry, 45. pp. 133-149.

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Sarfraz, M. and Haider, S. (2018) An efficient approach to address issues of graphene nanoplatelets (GNPs) incorporation in aluminium powders and their compaction behaviour. Metals, 8 (2).

Ban, S. and Pao, W. and Nasif, M.S. (2018) Numerical simulation of two-phase flow regime in horizontal pipeline and its validation. International Journal of Numerical Methods for Heat and Fluid Flow.

Bavoh, C.B. and Nashed, O. and Khan, M.S. and Partoon, B. and Lal, B. and Sharif, A.M. (2018) The impact of amino acids on methane hydrate phase boundary and formation kinetics. Journal of Chemical Thermodynamics, 117. pp. 48-53.

Beheshti, M. and Ismail, M.C. and Kakooei, S. and Shahrestani, S. and Mohan, G. and Zabihiazadboni, M. (2018) Influence of deposition temperature on the corrosion resistance of electrodeposited zinc-nickel alloy coatings: Einfluss der Abscheidetemperatur auf die KorrosionsbestÃ¤ndigkeit von galvanisch aufgebrachten Zink-Nickel-Beschichtungen. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 472-482.

Beheshti, M. and Zabihiazadboni, M. and Ismail, M.C. and Kakooei, S. and Shahrestani, S. (2018) Investigation on Simultaneous Effects of Shot Peen and Austenitizing Time and Temperature on Grain Size and Microstructure of Austenitic Manganese Steel (Hadfield). IOP Conference Series: Materials Science and Engineering, 328 (1).

Bilad, M.R. and Azizo, A.S. and Wirzal, M.D.H. and Jia Jia, L. and Putra, Z.A. and Nordin, N.A.H.M. and Mavukkandy, M.O. and Jasni, M.J.F. and Yusoff, A.R.M. (2018) Tackling membrane fouling in microalgae filtration using nylon 6,6 nanofiber membrane. Journal of Environmental Management, 223. pp. 23-28.

Bong, Y.C. and Oh, P.C. and Chew, T.L. (2018) The effect of amine substituent chain length on POSS/Polysulfone mixed matrix membrane. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3494-3504.

Budiman Abdurakhman, Y. and Adi Putra, Z. and Bilad, M.R. and Md Nordin, N.A.H. and Wirzal, M.D.H. (2018) Techno-economic analysis of biodiesel production process from waste cooking oil using catalytic membrane reactor and realistic feed composition. Chemical Engineering Research and Design, 134. pp. 564-574.

D

Din, I.U. and Shaharun, M.S. and Naeem, A. and Tasleem, S. and Rafie Johan, M. (2018) Carbon nanofibers based copper/zirconia catalysts for carbon dioxide hydrogenation to methanol: Effect of copper concentration. Chemical Engineering Journal, 334. pp. 619-629.

Ding, S.H. and Chew, T.L. and Oh, P.C. and Ahmad, A.L. and Jawad, Z.A. (2018) Preparation of mixed matrix membrane using cellulose acetate incorporated with synthesized KIT-6 silica. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3505-3514.

E

Endut, M.N.A.-A. and Abdullah, M.R.T.L. and Yaacob, R.A.I.R. (2018) Reformulation of critical thinking in the Malaysian tertiary engineering education: An Islamic approach. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 121-136.

F

Fayaz, F. and Nga, N.T.A. and Pham, T.L.M. and Danh, H.T. and Abdullah, B. and Setiabudi, H.D. and Vo, D.-V.N. (2018) Hydrogen production from ethanol dry reforming over lanthania-promoted Co/Al2O3 catalyst. IIUM Engineering Journal, 19 (1). pp. 24-33.

G

Ghaedi, H. and Ayoub, M. and Sufian, S. and Shariff, A.M. and Lal, B. and Wilfred, C.D. (2018) Density and refractive index measurements of transition-temperature mixture (deep eutectic analogues) based on potassium carbonate with dual hydrogen bond donors for CO2 capture. Journal of Chemical Thermodynamics, 118. pp. 147-158.

Ghanem, O.B. and Shah, S.N. and LÃ©vÃªque, J.-M. and Mutalib, M.I.A. and El-Harbawi, M. and Khan, A.S. and Alnarabiji, M.S. and Al-Absi, H.R.H. and Ullah, Z. (2018) Study of the antimicrobial activity of cyclic cation-based ionic liquids via experimental and group contribution QSAR model. Chemosphere, 195. pp. 21-28.

Gillani, Q.F. and Ahmad, F. and Abdul Mutalib, M.I. and Megat-Yusoff, P.S.M. and Ullah, S. and Messet, P.J. and Zia-ul-Mustafa, M. (2018) Thermal degradation and pyrolysis analysis of zinc borate reinforced intumescent fire retardant coatings. Progress in Organic Coatings, 123. pp. 82-98.

Gillani, Q.F. and Ahmad, F. and Mutalib, M.I.A. and Megat-Yusoff, P.S.M. and Ullah, S. (2018) Effects of Halloysite Nanotube Reinforcement in Expandable Graphite Based Intumescent Fire Retardant Coatings Developed Using Hybrid Epoxy Binder System. Chinese Journal of Polymer Science (English Edition). pp. 1-11.

Gonfa, G. and Muhammad, N. and Azmi Bustam, M. (2018) Probing the interactions between DNA nucleotides and biocompatible liquids: COSMO-RS and molecular simulation study. Separation and Purification Technology, 196. pp. 237-243.

H

Hamza, M.F. and Merican, Z.M.A. and Soleimani, H. and Abghari, S.Z. and Sinnathambi, C.M. and Stephen, K.D. (2018) A laboratory study of chemical enhanced oil recovery (CEOR) in compartmentalized sandstone reservoir: A case study of a 2-D phase macro-model reservoir. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 893-901.

Hussain, M. and Tufa, L.D. and Yusup, S. and Zabiri, H. (2018) A kinetic-based simulation model of palm kernel shell steam gasification in a circulating fluidized bed using Aspen PlusÂ®: A case study. Biofuels. pp. 1-12.

Huzir, N.M. and Aziz, M.M.A. and Ismail, S.B. and Abdullah, B. and Mahmood, N.A.N. and Umor, N.A. and Syed Muhammad, S.A.F. (2018) Agro-industrial waste to biobutanol production: Eco-friendly biofuels for next generation. Renewable and Sustainable Energy Reviews, 94. pp. 476-485.

I

Ibrahim, N.A. and Wirzal, M.D.H. and Nordin, N.A.H. and Abd Halim, N.S. (2018) Development of Polyvinylidene fluoride (PVDF)-ZIF-8 Membrane for Wastewater Treatment. IOP Conference Series: Earth and Environmental Science, 140 (1).

Irfan, M. and Ahmad, T. and Moniruzzaman, M. and Abdullah, B. (2018) Ionic liquid functionalized synthesis of gold nanoparticles in response to Elaise Guineensis (oil palm) leaves amount. AIP Conference Proceedings, 1963.

J

Jafary, T. and Wan Daud, W.R. and Ghasemi, M. and Abu Bakar, M.H. and Sedighi, M. and Kim, B.H. and Carmona-MartÃnez, A.A. and Jahim, J.M. and Ismail, M. (2018) Clean hydrogen production in a full biological microbial electrolysis cell. International Journal of Hydrogen Energy.

Jamil, A. and Oh, P.C. and Shariff, A.M. (2018) Polyetherimide-montmorillonite mixed matrix hollow fibre membranes: Effect of inorganic/organic montmorillonite on CO2/CH4 separation. Separation and Purification Technology, 206. pp. 256-267.

Javaid, M.U. and Isha, A.S.N. and Sabir, A.A. and Ghazali, Z. and NÃ¼bling, M. (2018) Does Psychosocial Work Environment Factors Predict Stress and Mean Arterial Pressure in the Malaysian Industry Workers? BioMed Research International, 2018.

Jilani, M.T. and Rehman, M.Z.U. and Khan, A.M. and Chughtai, O. and Abbas, M.A. and Khan, M.T. (2018) An implementation of IoT-based microwave sensing system for the evaluation of tissues moisture. Microelectronics Journal.

Jumbri, K. and Noh, N.S.F.M. and Ahmad, N.A. and Rahman, M.B.A. and Ahmad, H. (2018) Synthesis and characterization of new cholinium-based ionic liquids for antimicrobial application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 16-23.

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2018) Effects of amine-functionalization on mixed matrix membranes encompassing of T-type zeolite and 6FDA-based polyimide for separation of CO2 from CH4. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5126-5134.

K

Kandasamy, S. and Moniruzzaman, M. and Sivapragasam, M. and Shamsuddin, M.R. and Mutalib, M.I.A. (2018) Formulation and characterization of acetate based ionic liquid in oil microemulsion as a carrier for acyclovir and methotrexate. Separation and Purification Technology, 196. pp. 149-156.

Kartikawati, N.A. and Safdar, R. and Lal, B. and Mutalib, M.I.B.A. and Shariff, A.M. (2018) Measurement and correlation of the physical properties of aqueous solutions of ammonium based ionic liquids. Journal of Molecular Liquids, 253. pp. 250-258.

Kaur, H. and Jaafar, A. (2018) The effect of sodium hydroxide on drag reduction using banana peel as a drag reduction agent. AIP Conference Proceedings, 1930.

Khan, A.S. and Man, Z. and Bustam, M.A. and Kait, C.F. and Nasrullah, A. and Ullah, Z. and Sarwono, A. and Ahamd, P. and Muhammad, N. (2018) Dicationic ionic liquids as sustainable approach for direct conversion of cellulose to levulinic acid. Journal of Cleaner Production, 170. pp. 591-600.

Khan, A.S. and Man, Z. and Bustam, M.A. and Nasrullah, A. and Ullah, Z. and Sarwono, A. and Shah, F.U. and Muhammad, N. (2018) Efficient conversion of lignocellulosic biomass to levulinic acid using acidic ionic liquids. Carbohydrate Polymers, 181. pp. 208-214.

Khan, M.S. and Ahmed, I. and Lal, B. and Idris, A.-A. and Albeirutty, M.H. and Ayoub, M. and Sufian, S.B. (2018) Physicochemical and FTIR Study of Diesel-Hydrogen Peroxide Fuel Blend. IOP Conference Series: Materials Science and Engineering, 344 (1).

Khan, M.S. and Bavoh, C.B. and Partoon, B. and Nashed, O. and Lal, B. and Mellon, N.B. (2018) Impacts of ammonium based ionic liquids alkyl chain on thermodynamic hydrate inhibition for carbon dioxide rich binary gas. Journal of Molecular Liquids, 261. pp. 283-290.

Khan, M.S. and Lal, B. and Keong, L.K. and Sabil, K.M. (2018) Experimental evaluation and thermodynamic modelling of AILs alkyl chain elongation on methane riched gas hydrate system. Fluid Phase Equilibria, 473. pp. 300-309.

Khan, M.S. and Yaqub, S. and Manner, N. and Karthwathi, N.A. and Qasim, A. and Binti Mellon, N. and Lal, B. (2018) Experimental Equipment Validation for Methane (CH4) and Carbon Dioxide (CO2) Hydrates. IOP Conference Series: Materials Science and Engineering, 344 (1).

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Garg, S. and Shariff, A.M. and Farrukh, S. and Ayoub, M. and Ghaedi, H. (2018) High-pressure absorption study of CO2 in aqueous N-methyldiethanolamine (MDEA) and MDEA-piperazine (PZ)-1-butyl-3-methylimidazolium trifluoromethanesulfonate bmimOTf hybrid solvents. Journal of Molecular Liquids, 249. pp. 1236-1244.

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Shariff, A.M. (2018) Solubility of CO2 in piperazine (PZ) activated aqueous N-methyldiethanolamine (MDEA) solvent under high pressure. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 96-102.

L

Lai, L.S. and Yeong, Y.F. and Lau, K.K. and Azmi, M.S. and Chew, T.L. (2018) Zeolitic Imidazolate Framework-8 Membrane for H2/CO2 Separation: Experimental and Modeling. IOP Conference Series: Materials Science and Engineering, 318 (1).

Lal, B. and Shariff, A.M. and Mukhtar, H. and Nasir, Q. and Qasim, A. (2018) An overview of cryogenic separation techniques for natural gas with high CO2 content. Journal of Engineering and Applied Sciences, 13 (8). pp. 2152-2155.

Lee, S.-P. and Mellon, N. and Shariff, A.M. and Leveque, J.-M. (2018) High-pressure CO2-CH4 selective adsorption on covalent organic polymer. Journal of Natural Gas Science and Engineering, 50. pp. 139-146.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. (2018) Thickness dependent penetrant gas transport properties and separation performance within ultrathin polysulfone membrane: Insights from atomistic molecular simulation. Journal of Polymer Science, Part B: Polymer Physics, 56 (2). pp. 131-158.

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. and Jusoh, N. and Ahmad, F. (2018) An atomistic simulation towards elucidation of operating temperature effect in CO2 swelling of polysulfone polymeric membranes. Journal of Natural Gas Science and Engineering, 57. pp. 135-154.

M

Masri, A.N. and Abdul Mutalib, M.I. and Aminuddin, N.F. and LÃ©vÃªque, J.-M. (2018) Novel SO3H-functionalized dicationic ionic liquids â�� A comparative study for esterification reaction by ultrasound cavitation and mechanical stirring for biodiesel production. Separation and Purification Technology, 196. pp. 106-114.

Mohshim, D.F. and Mukhtar, H. and Man, Z. (2018) A study on carbon dioxide removal by blending the ionic liquid in membrane synthesis. Separation and Purification Technology, 196. pp. 20-26.

Mohsin, H.M. and Johari, K. and Shariff, A.M. (2018) Virgin coconut oil (VCO) and potassium glycinate (PG) mixture as absorbent for carbon dioxide capture. Fuel, 232. pp. 454-462.

Mubashir, M. and Fong, Y.Y. and Leng, C.T. and Keong, L.K. (2018) Issues and Current Trends of Hollow-Fiber Mixed-Matrix Membranes for CO2 Separation from N2 and CH4. Chemical Engineering and Technology, 41 (2). pp. 235-252.

Mubashir, M. and Yeong, Y.F. and Lau, K.K. and Chew, T.L. and Norwahyu, J. (2018) Efficient CO2/N2 and CO2/CH4 separation using NH2-MIL-53(Al)/cellulose acetate (CA) mixed matrix membranes. Separation and Purification Technology, 199. pp. 140-151.

Murugiah, P.S. and Oh, P.C. and Lau, K.K. (2018) The performance of PPOdm-CNF Mixed Matrix Membrane for CO2/CH4 separation. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5086-5096.

N

Nashed, O. and Dadebayev, D. and Khan, M.S. and Bavoh, C.B. and Lal, B. and Shariff, A.M. (2018) Experimental and modelling studies on thermodynamic methane hydrate inhibition in the presence of ionic liquids. Journal of Molecular Liquids, 249. pp. 886-891.

Nashed, O. and Partoon, B. and Lal, B. and Sabil, K.M. and Shariff, A.M. (2018) Review the impact of nanoparticles on the thermodynamics and kinetics of gas hydrate formation. Journal of Natural Gas Science and Engineering, 55. pp. 452-465.

Nashed, O. and Sabil, K.M. and Ismail, L. and Japper-Jaafar, A. and Lal, B. (2018) Mean induction time and isothermal kinetic analysis of methane hydrate formation in water and imidazolium based ionic liquid solutions. Journal of Chemical Thermodynamics, 117. pp. 147-154.

Nizam, N.F.I.A. and Sallih, N. and Puspitasari, D. and Ginta, T.L. and Mustapha, M. (2018) The influence of substrate surface energy on the adhesion compatibility of epoxy adhesive using molecular simulation tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2786-2792.

Noh, Mohd Hilmi (2018) Fast-charging of Lithium Iron Phosphate battery with ohmic-drop compensation method: Ageing study. Journal of Power Sources, 16. pp. 21-36.

O

Okitsu, J. and Matsuo, T. and Yamamoto, H. and Zabiri, H.B. and Tufa, L.D. and Ramasamy, M. (2018) Cause analysis of representative troubles at distillation tower using discriminant analysis. IEEE International Conference on Industrial Engineering and Engineering Management, 2017-D. pp. 1901-1905.

P

Pao, W. and Sam, B. and Saieed, A. and Tran, C.M. (2018) Numerical Investigation of Liquid Carryover in T-Junction with Different Diameter Ratios. IOP Conference Series: Materials Science and Engineering, 328 (1).

Puspitasari, D. and Ginta, T.L. and Mustapha, M. and Sallih, N. and Puspitasari, P. (2018) Statistical optimization of stress relieving parameters on closed cell aluminium foam using central composite design. Archives of Materials Science and Engineering, 89 (2). pp. 55-63.

Puspitasari, P. and Fauzan, R. and Ginta, T.L. and Mustapha, M. and Puspitasari, D. (2018) Morphology of aluminium with nickel addition on sand casting process. Journal of Achievements in Materials and Manufacturing Engineering, 87 (1). pp. 13-17.

Putra, N.R. and Idham, Z.B. and Machmudah, S. and Ruslan, M.S.H.B. and Che Yunus, M.A. (2018) Extraction of peanut skin oil by modified supercritical carbon dioxide: Empirical modelling and optimization. Separation Science and Technology (Philadelphia). pp. 1-9.

Putra, N.R. and Yunus, M.A.C. and Ruslan, M.S.H. and Idham, Z. and Idrus, F.N. (2018) Comparison extraction of peanut skin between CO2 supercritical fluid extraction and soxhlet extraction in term of oil yield and catechin. Pertanika Journal of Science and Technology, 26 (2). pp. 799-810.

R

Raj, J.J. and Magaret, S. and Pranesh, M. and Lethesh, K.C. and Devi, W.C. and Mutalib, M.I.A. (2018) Extractive desulfurization of model fuel oil using ester functionalized imidazolium ionic liquids. Separation and Purification Technology, 196. pp. 115-123.

Raja Shahrom, M.S. and Wilfred, C.D. and Chong, F.K. (2018) Thermodynamic and kinetic studies on CO2 capture with PolyVBTMAArg. Journal of Physics and Chemistry of Solids, 116. pp. 22-29.

Rashid, T. and Gnanasundaram, N. and Appusamy, A. and Kait, C.F. and Thanabalan, M. (2018) Enhanced lignin extraction from different species of oil palm biomass: Kinetics and optimization of extraction conditions. Industrial Crops and Products, 116. pp. 122-136.

Rashid, Z. and Wilfred, C.D. and Gnanasundaram, N. and Arunagiri, A. and Murugesan, T. (2018) Screening of ionic liquids as green oilfield solvents for the potential removal of asphaltene from simulated oil: COSMO-RS model approach. Journal of Molecular Liquids, 255. pp. 492-503.

Ruslan, M.S.H. and Idham, Z. and Nian Yian, L. and Ahmad Zaini, M.A. and Che Yunus, M.A. (2018) Effect of operating conditions on catechin extraction from betel nuts using supercritical CO2-methanol extraction. Separation Science and Technology (Philadelphia), 53 (4). pp. 662-670.

S

Sabuan, N.A. and Zolkafli, N. and Mebrahitom, A. and Azhari, A. and Mamat, O. (2018) The development of Zirconia and Copper toughened Alumina ceramic insert. IOP Conference Series: Materials Science and Engineering, 342 (1).

Safdar, R. and Omar, A.A. and Lal, B. (2018) Performance of aqueous tetrabutylammonium hydroxide, piperazine and their blends for carbon dioxide capture. Journal of Molecular Liquids, 266. pp. 522-528.

Saieed, A. and Pao, W. and Ali, H.M. (2018) Prediction of phase separation in a T-Junction. Experimental Thermal and Fluid Science, 97. pp. 160-179.

Saieed, A. and Pao, W. and Hashim, F.M. (2018) Effect of T-junction diameter ratio on stratified-wavy flow separation. Journal of Natural Gas Science and Engineering, 51. pp. 223-232.

Saieed, A. and Pao, W. and Hashim, F.M. and Norpiah, R.B.M. (2018) Numerical study of gas-liquid flow maldistribution in a T-junction having very small diameter ratio. 3rd International Conference on Power Generation Systems and Renewable Energy Technologies, PGSRET 2017, 2018-J. pp. 136-141.

Salam, M.A. and Ahmed, K. and Akter, N. and Hossain, T. and Abdullah, B. (2018) A review of hydrogen production via biomass gasification and its prospect in Bangladesh. International Journal of Hydrogen Energy.

Salvinder, K.M.S. and Zabiri, H. and Isa, F. and Taqvi, S.A. and Roslan, M.A.H. and Shariff, A.M. (2018) Dynamic modelling, simulation and basic control of CO2 absorption based on high pressure pilot plant for natural gas treatment. International Journal of Greenhouse Gas Control, 70. pp. 164-177.

Samat, N.A.S.A. and Zabiri, H. and Kamaruddin, B. (2018) The development and investigation analysis of an arx-based generalized likelihood ratio (GLR) stiction detection method. Jurnal Teknologi, 80 (4). pp. 1-16.

Sarwono, A. and Man, Z. and Bustam, M.A. and Subbarao, D. and Idris, A. and Muhammad, N. and Khan, A.S. and Ullah, Z. (2018) Swelling mechanism of urea cross-linked starchâ��lignin films in water. Environmental Technology (United Kingdom), 39 (12). pp. 1522-1532.

Satar, I. and Daud, W.R.W. and Kim, B.H. and Somalu, M.R. and Ghasemi, M. and Bakar, M.H.A. and Jafary, T. and Timmiati, S.N. (2018) Performance of titaniumâ��nickel (Ti/Ni) and graphite felt-nickel (GF/Ni) electrodeposited by Ni as alternative cathodes for microbial fuel cells. Journal of the Taiwan Institute of Chemical Engineers, 89. pp. 67-76.

Shah, S.N. and Pranesh, M. and Raj, J.J. and Mutalib, M.I.A. and Lethesh, K.C. and Ghanem, O.B. and Ullah, Z. (2018) De-acidification of crude oil using supported ionic liquids phases. Separation and Purification Technology, 196. pp. 96-105.

Shaharun, S. and Shaharun, M.S. and Shah, M.F.M. and Amer, N.A. (2018) Catalytic performance of Cu/ZnO/Al2O3/ZrO2 for slurry methanol synthesis from CO hydrogenation: Effect of Cu/Zn molar ratio. Sains Malaysiana, 47 (1). pp. 207-214.

Shahid, M.Z. and Maulud, A.S. and Bustam, M.A. (2018) Non-invasive monitoring of CO2 concentration in aqueous diethanolamine (DEA), methyldiethanolamine (MDEA) and their blends in high CO2 loading region using Raman spectroscopy and partial least square regression (PLSR). International Journal of Greenhouse Gas Control, 68. pp. 42-48.

Shahrestani, S. and Ismail, M.C. and Kakooei, S. and Beheshti, M. and Zabihiazadboni, M. and Zavareh, M.A. (2018) Iridium Oxide pH Sensor Based on Stainless Steel Wire for pH Mapping on Metal Surface. IOP Conference Series: Materials Science and Engineering, 328 (1).

Shamim, M.Y. and Buang, A. and Shariff, A.M. and Anjum, H. (2018) Implementation of safety performance framework (SPF) in process industries to avoid disasters. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5022-5035.

Shehzad, N. and Johari, K. and Murugesan, T. and Tahir, M. (2018) Graphene Oxide as An Efficient Photocatalyst For Photocatalytic Reduction of CO2 Into Solar Fuel. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 4909-4918.

Shehzad, N. and Tahir, M. and Johari, K. and Murugesan, T. and Hussain, M. (2018) A critical review on TiO2 based photocatalytic CO2 reduction system: Strategies to improve efficiency. Journal of CO2 Utilization, 26. pp. 98-122.

Sivalingam, J.R. and Kait, C.F. and Wilfred, C.D. (2018) CeO2-TiO2 photocatalyst: Ionic liquid-mediated synthesis, characterization, and performance for diisopropanolamine visible light degradation. Bulletin of Chemical Reaction Engineering & Catalysis, 13 (1). pp. 170-178.

Sivanathan, P. and Ismail, M.C. and Eng, K.K. (2018) Chloride Induced Stress Corrosion Cracking (CISCC) of austenitic stainless steel under thermal insulation at ambient temperature. Journal of Engineering and Applied Sciences, 13 (2). pp. 361-366.

Suleman, H. and Maulud, A.S. and Man, Z. (2018) Experimental measurements and modelling of carbon dioxide solubility in aqueous AMP/MDEA and Piperazine/MDEA blends. Fluid Phase Equilibria, 463. pp. 142-148.

Suleman, H. and Maulud, A.S. and Shah, S.N. and Man, Z. and Mutalib, M.I.A. (2018) Thermodynamic modelling of liquid-liquid extraction systems involving ionic liquids: A new approach. Journal of Molecular Liquids, 252. pp. 18-23.

Suleman, H. and Maulud, A.S. and Syalsabila, A. (2018) Thermodynamic modelling of carbon dioxide solubility in aqueous amino acid salt solutions and their blends with alkanolamines. Journal of CO2 Utilization, 26. pp. 336-349.

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Development, characterization and performance evaluation of a swelling resistant membrane for CO2/CH4 separation. Journal of Natural Gas Science and Engineering, 52. pp. 390-400.

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Enhanced gas separation performance of PSF membrane after modification to PSF/PDMS composite membrane in CO2/CH4 separation. Journal of Applied Polymer Science, 135 (1).

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Experimental evaluation and theoretical prediction of CO2 & CH4 permeation in PSF/PDMS composite membrane under the influence of membrane swelling. Canadian Journal of Chemical Engineering, 96 (8). pp. 1796-1804.

T

Theng, S.G. and Jumbri, K. and Wirzal, M.D.H. (2018) Molecular dynamics simulation of membrane in room temperature ionic liquids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 38-45.

Tuan, T.T. and Tufa, L.D. and Mutalib, M.I.A. and Ramli, N.M. (2018) Optimal operation of a process by integrating dynamic economic optimization and model predictive control formulated with empirical model. Archives of Control Sciences, 28 (1). pp. 35-50.

U

Ullah, H. and Wilfred, C.D. and Shaharun, M.S. (2018) Green synthesis of copper nanoparticle using ionic liquid-based extraction from Polygonum minus and their applications. Environmental Technology (United Kingdom). pp. 1-8.

Ullah, Z. and Khan, A.S. and Muhammad, N. and Ullah, R. and Alqahtani, A.S. and Shah, S.N. and Ghanem, O.B. and Bustam, M.A. and Man, Z. (2018) A review on ionic liquids as perspective catalysts in transesterification of different feedstock oil into biodiesel. Journal of Molecular Liquids, 266. pp. 673-686.

Umar, A.A. and Saaid, I.B.M. and Sulaimon, A.A. and Pilus, R.B.M. (2018) A review of petroleum emulsions and recent progress on water-in-crude oil emulsions stabilized by natural surfactants and solids. Journal of Petroleum Science and Engineering, 165. pp. 673-690.

Y

Ya, H.H. and Luthfi, H. and Ngo, N.-T. and Hassan, S. and Pao, W. (2018) A Preliminary Experimental Investigation of Wet Fine Erosion in Two-Phase Flow. IOP Conference Series: Materials Science and Engineering, 328 (1).

Yusoff, A.A. and Abdullah, M.R.T.L. and Endut, M.N.A.-A. and Aziz, E.A. and Talib, A.T. (2018) Indicators for Socio-Religious Harmony Index (SRHI) instrument for Malaysia: Findings of FDM expert panel. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 55-72.

Yusoff, N.H.N. and Mamat, O. and Isa, M.C. and Amir, N. (2018) Optimisation of electrodeposition parameters on the mechanical properties of nickel cobalt coated mild steel. Defence S and T Technical Bulletin, 11 (1). pp. 57-65.

Z

Zabiri, H. and Marappagounder, R. and Ramli, N.M. (2018) Parallel based support vector regression for empirical modeling of nonlinear chemical process systems. Sains Malaysiana, 47 (3). pp. 635-643.

Zainal Abidin, M. and Rusli, R. and Khan, F. and Mohd Shariff, A. (2018) Development of inherent safety benefits index to analyse the impact of inherent safety implementation. Process Safety and Environmental Protection, 117. pp. 454-472.

This list was generated on Sun Nov 24 07:42:12 2024 +08.