Items where Department / MOR is "Mechanical Engineering" and Year is 2010

Article

Al-Kayiem, Hussain H. (2010) Data Acquisition and Control System for On-line Measurement and Analysis of Complex Flow Fields. Proceedings of the 3rd International Conference on Intelligent and Advanced Systems, ICIAS2010. ISSN ISBN: 978-1-4244-6624-5

Alnaimi , F. B. I. and Al-Kayiem, Hussain H. (2010) Artificial Intelligent System for Steam Boiler Diagnosis Based on Superheater Monitoring. Journal of Applied Sciences, online. ISSN 18125654

B. Shehabuddeen , Kamarudin and Mohd Hashim , Fakhruldin (2010) Development of a Vertical Self-balancing Experimental Autonomous Underwater Vehicle. International Journal of Engineering and Technology (IJET-IJENS), 10 (2). ISSN 2077-1185

Fatikul Arif, Muhamad and Megat-Yusoff, Puteri Sri Melor and Ahmad, Faiz (2010) Effects Of Chemical Treatment On Oil Palm Empty Fruit Bunch Reinforced High Density Polyethylene Composites. Journal of Reinforced Polymer Composites, 29 (14). pp. 2105-2118. ISSN 0731-6844

Gilani, S. I. and Petrus, Tri Bhaskoro (2010) Transient Cooling Load Simulation of a Mechanical Workshop at UTP Using TRNSYS. International conference on plant equipment & reliability, 2010.

Hassan, S. (2010) A Preliminary Investigation of Compressed Producer Gas from Downdraft Biomass Gasifier. Journal of Applied Sciences, 10 (5). pp. 406-412. ISSN 1812-5654

Hussain, P and Mamat, Othman and Mohammad, Mazlan (2010) Formation of Nitrogen-Pearlite in the Diffusion Bonding of Sialon to 316L Stainless Steel. American Institute of Physics Conference Proceeding, 1217 (129). ISSN 978-0-7354-0673-5

Hussain, P and Mamat, Othman and Mohammad, Mazlan (2010) Formation of Nitrogen-Pearlite in the Diffusion Bonding of Sialon to 316L Stainless Steel. American Institute of Physics (AIP).

Ismail, F. B. and Al-Kayiem, Hussain H. (2010) Multidimensional Minimization Training Algorithms for Steam Boiler Drum Level Trip Using Artificial Intelligence Monitoring System. Proceedings of the 3rd International Conference on Intelligent and Advanced Systems (ICIAS2010) . ISSN ISBN:978-1-4244-6624-5

Megat-Yusoff, Puteri Sri Melor and Ahmad, Faiz and Amir, Norlaili and Leong, Siew Yoong (2010) Effect Of Particle Dispersion On Thermal Conductivity Of Copper Powder Filled Epoxy Composites. AIP Conference Proceedings, 1217 (1). pp. 363-369. ISSN 0094243X

Nugroho, G. and A.M.S., Ali and Abdul Karim, Z. A. (2010) PROPERTIES OF curl(phi) AND grad(phi)+curl(phi) CLASSES OF SOLUTION TO THE THREE-DIMENSIONAL INCOMPRESSIBLE NAVIER-STOKES EQUATIONS. International Journal of Applied Mathematics and Mechanics, 6 (11). pp. 98-117. ISSN 0973-0184

Nugroho, Gunawan and A.M.S., Ali and Abdul Karim, Z. A. (2010) A CLASS OF EXACT SOLUTION TO THE THREE-DIMENSIONAL INCOMPRESSIBLE NAVIER-STOKES EQUATIONS. Applied Mathematics Letters, 23 (11). pp. 1388-1396. ISSN 8939659

Pradhan, M.K. and Biswas, C.K. (2010) Neuro-fuzzy and neural network-based prediction of various responses in electrical discharge machining of AISI D2 steel. International Journal of Advanced Manufacturing Technology, 50 (5-8). pp. 591-610.

RM, Kuppan Chetty and M, Singaperumal and T., Nagarajan (2010) Behaviour based planning and control of leader follower formation in wheeled mobile robots. Int. Journal of Advanced Mechatronic Systems, 2 (4). pp. 281-296. ISSN ISSN (Online): 1756-8420 - ISSN (Print): 1756-8412

Ugheoke, BI and Mamat, O. and Ariwahjoedi, B. (2010) A Brief Survey of the Literature on Silica Refractory Research and Development: The Case for Nanostructured Silica Obtained from Rice Husk Ash (RHA). Diffusion and Defect Data. Pt A Defect and Diffusion Forum, 307. pp. 53-62. ISSN 10120386

Vu, Trieu Minh and Fakhruldin, Bin Mohd Hashim (2010) Adaptive Teleoperation System with Neural Network-Based Multiple Model Control. Mathematical Problems in Engineering, Volume (Articl). pp. 1-15. ISSN 1024123X

Vu, Trieu Minh and Idris, Bin Ibrahim (2010) Modeling and Control of an Ill-Conditioned Distillation Column. Modelling, Identification, and Control, 2010 (1). pp. 91-96. ISSN 1025-8973

Woldeyohannes, Abraham Debebe and Abd Majid, Mohd Amin (2010) Simulation model for natural gas transmission pipeline network system. Simulation Modelling Practice and Theory, 19 (20. pp. 196-212.

Book Section

H. , Hussin and M. , Muhammad and F.M. , Hashim and S.N. , Ibrahim (2010) A practical method for analyzing offshore gas compressor system maintenance data. In: IAENG Transactions on Engineering Technologies. American Institute of Physics (AIP), Melville, New York, pp. 207-221. ISBN 978-0-7354-0839-5

Vu, Trieu Minh (2010) Modeling and Control for a Petroleum Process. In: 5th IEEE Conference on Industrial Electronics and Applications (ICIEA 2010). CFP1020A-USB, 2010 (551681). Taiwan, pp. 259-263. ISBN 978-142445046-6

Conference or Workshop Item

Al-Kayiem, Hussain H. and Chelven, AK K. (2010) EXPERIMENTAL AND NUMERICAL INVESTIGATION ON A 2-D WING – GROUND COLLISION. In: World Engineering Congress 2010, Conference on Aerospace and Mechanical Engineering, 2-5 August 2010, Kuching. Sarawak.

Alemu Lemma, Tamiru and Mohd Hashim, Fakhruldin and Rangkuti, Chalillullah (2010) Fault Detection Relevant Modeling of an Industrial Gas Turbine based on Neuro-Fuzzy Approach. In: International Conference on Plant Equipment and Reliability (ICPER), 15-17 June 2010, Kuala Lumpur, Malaysia.

Alnaimi, F. B. I. and Al-Kayiem, Hussain H. (2010) Multidimensional Minimization Training Algorithms for Steam Boiler High Temperature Superheater Trip using Artificial Intelligence Monitoring System. In: Control Automation Robotics & Vision (ICARCV), 2010 11th International Conference, 7-10 Dec. 2010, singapore.

Amir, Norlaili and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2010) Study on Fiber Reinforced Epoxy-based Intumescent Coating Formulations and Their Characteristics. In: International Conference on Plant Equipment and Reliability (ICPER 2010), Kuala Lumpur, Malaysia , 15-17 June 2010, Kuala Lumpur, Malaysia.

Amir, Norlaili and Ahmad, Faiz and Megatt-Yusoff, P.S.M. (2010) Study on the Fibre Reinforced Epoxy-based Intumescent Coating Formulations and the Char Characteristics. In: ICPER2010, 15-17 June 2010, Kuala Lumpur Convention Centre.

Aris, Mohd (2010) The Two-Way Training of Shape Memory Alloys Vortex Generators Manufactured in a Selective Laser Melting Process. In: International Conference on Plant Equipment and Reliability (ICPER 2010), Kuala Lumpur, Malaysia , 15-17 June 2010, Kuala Lumpur, Malaysia.

Atnaw, Samson Mekbib and Sulaiman, S. A. and Yusup, Suzana (2010) A Simulation Study of Downdraft Gasification of Oil-Palm Fronds Using ASPEN PLUS. In: International Conference on Plant Equipment and Reliability (ICPER), June 2010, Kuala Lumpur.

Git, H. M. and Sulaiman, S. A. (2010) Measuring Service Quality of a Multi-Disciplinary Engineering Course. In: 3rd Regional Conference on Engineering Education & Research in Higher Education, 7-9 June 2010, Kuching, Malaysia.

Hasan, Nurul (2010) Predicting The Nanoparticle Diffusion using Computational Fluid Dynamics (CFD). In: International Conference on Process Engineering and Advanced Materials (ICPEAM 2010), 15-17 June 2010, Kuala Lumpur Convention Centre.

Jaafar, A and Escudier, Marcel and Poole, Robert (2010) Transition to turbulence in a concentric annular pipe. In: The 6th Annual European Rheology Conference, 7 - 9 April 2010, Sweden.

Jaafar, A and Poole, Robert (2010) Drag reduction of biopolymer flows. In: The 2nd International Conference on Plant Equipment and Reliability, June, 2010, Kuala Lumpur, Malaysia.

Jaafar, Azuraien and Escudier, Marcel and Poole, Robert (2010) Transition to turbulence in a concentric annular pipe. In: The 6th Annual European Rheology Conference, 7 - 9 April 2010, Sweden.

Jaafar, Azuraien and Poole, Robert (2010) Drag reduction of biopolymer flows. In: The 2nd International Conference on Plant Equipment and Reliability, June, 2010, Kuala Lumpur, Malaysia.

Moni, M. N. Z. and Sulaiman, S. A. (2010) A Preliminary Study on Synthesis Gas Produced by Gasification of Oil Palm Fronds. In: International Conference on Plant Equipment and Reliability (ICPER), June 2010, Kuala Lumpur.

Nasir Reshid , Meseret and Abd Majid , Mohd Amin (2010) A Multi-State Reliability Model for a Gas Fueled Cogenerated Power Plant. In: International Conference on Plant Equipment and Reliability (ICPER 2010), Kuala Lumpur, Malaysia , 15-17 June 2010, Kuala Lumpur, Malaysia.

Nugroho, Gunawan and Ali, A.M.S. and Abdul Karim, Z. A. (2010) A Short Review on the Analytical Methods in Fluid Dynamics Research: The Importance of Exact Solutions. In: 2nd International Conference on Plant Equipment and Reliability, 15-17 June 2010, Kuala Lumpur Convention Centre.

O. Abdalla, Mohamed and Nagarajan, T. and M. Hashim, Fakhruldin (2010) Numerical Investigation of Pressure Drop in Hydraulic Spool Valve. In: Proceedings of ICSSST2010, 3rd International Conference on Solid State Science & Technology, December 01-03, 2010, Kuching.

Sulaiman, S. A. and Balamohan, S. and Moni, M. N. Z. and Mekbib, S. and Mohamed, Ahmed Osman (2010) Study on the Feasibility of Oil Palm-Fronds for Biomass Gasification. In: 5th International Ege Energy Symposium and Exhibition, June 2010, Denizli, Turkey.

Sulaiman, S. A. and Basil, Sherrene C. and Dunggatt , Nelson S. and Hashim , Mohd Hafriz M. (2010) Automated Calculations for Improvement of Tank Inventory at Fuel Terminals. In: International Conference on Plant Equipment and Reliability (ICPER), June 2010, Kuala Lumpur.

Sulaiman, S. A. and Git, H. M. and Abdul Rani, A. M. (2010) Engineering Team Project Course for Development of Teamwork Skills. In: 3rd Regional Conference on Engineering Education & Research in Higher Education, 7-9 June 2010, Kuching, Malaysia.

Sulaiman, S. A. and Hassan, A. H. (2010) Analysis of Annual Cooling Energy Requirements for Glazed Academic Buildings. In: International Conference on Plant Equipment and Reliability (ICPER), June 2010, Kuala Lumpur.

Sulaiman, S. A. and Jamaludin, S. E. (2010) A Study on the Use of Orifice Plates as Steam Traps. In: International Conference on Plant Equipment and Reliability (ICPER), June 2010, Kuala Lumpur.

Sulaiman, S. A. and Tambi, Fara Husna and Khamidi, M. Faris (2010) Reduction of Cooling Energy for Highly Glazed Buildings in Malaysia through Scheduled Start-up and Shutdown of Air-Conditioners. In: 5th International Ege Energy Symposium and Exhibition, June 2010, Denizli, Turkey.

Ullah, Sami and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2010) A Study on Bonding Mechanism of Expandable Graphite Based Intumescent Coating on Steel Substrate. In: International Conference on Plant Equipment and Reliability (ICPER 2010), Kuala Lumpur, Malaysia , 15-17 June 2010, Kuala Lumpur, Malaysia.

Ullah, Sami and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2010) Effect of Kaolin Clay on Thermal Degradation of Intumescent Fire Retardant Coating. In: International Conference on Plant Equipment and Reliability (ICPER 2010), Kuala Lumpur, Malaysia , 15-17 June 2010, Kuala Lumpur, Malaysia.

Ullah, Sami and Faiz , Ahmad and Puteri , Sri Melor Bt Megat Yusoff (2010) Study of bonding mechanism of expandable graphite based intumescent coating. In: 2nd International Conference on Plant Equipment and Reliability (ICPER), 15 to 17 June 2010 , Convention Center Kuala Lumpur, Malaysia .

Wahab, A.A. and Abdul Latif, M.R. and Karuppanan, S and Abdul Aziz, A.H. (2010) THREE-DIMENSIONAL RECONSTRUCTION OF RESIN-INFUSED CARBON FIBER REINFORCED POLYMER COMPOSITE. In: 19th Scientific Conference of the Electron Microscopy Society of Malaysia, 14-16 Dec 2010, Langkawi.

Wasiu, Saheed and Sulaiman, S. A. (2010) Effects of varying EGR rates on the nitric oxide (NOx) emissions. In: International Conference on Plant Equipment and Reliability (ICPER), June 2010, Kuala Lumpur.

Book

Idrus, Arazi and Sulaiman, S. A. and Khamidi, M. Faris (2010) Engineers in Society. McGraw-Hill. ISBN 978-983-3850-71-6

Citation Index Journal

A Majid, M Amin and Waluyo, Joko (2010) Thermocline Thickness Evaluation on Stratified Thermal Energy Storage Tank of Co-generated District Cooling Plant. [Citation Index Journal]

A Majid, Mohd Amin and Muhammad, Masdi and Nur IllaniYen@Yem,, Nur IllaniYen@Yem, (2010) RCM Analysis of Process Equipment: A Case Study on Heat Exchanger. [Citation Index Journal]

Al-Kayiem, Hussain H. and Ismail, M. Z. A. and Zaki, N. M and Elfeel, M. E. (2010) Simulation of the cuttings cleaning during the drilling operation. [Citation Index Journal]

Al-Kayiem, Hussain H. and Sidik , M.F.B.M. and Munusammy, Y.R.A.L. (2010) Study on the thermal accumulation and distribution inside a parked car cabin. [Citation Index Journal]

Badri, T. M. and Al-Kayiem, Hussain H. (2010) Numerical Analysis of Thermal and Elastic Stresses in Thick Pressure Vessels for Cryogenic Hydrogen Storage Apparatus. [Citation Index Journal]

Habib, Khairul (2010) Experimental study on adsorption kinetics of activated carbon/R134a and activated carbon/R507A pairs. [Citation Index Journal]

Ibrahim, Idris and A. Jalil, Adibah and Sulaiman, S. A. (2010) THE EFFECT OF EFI TO THE CARBURETED SINGLE CYLINDER FOUR STROKE ENGINE. [Citation Index Journal]

Jaafar, A and Escudier, Marcel and Poole, Robert (2010) Laminar, transitional and turbulent annular flow of drag-reducing polymer solutions. [Citation Index Journal]

Jaafar, A and Escudier, Marcel and Poole, Robert (2010) Laminar, transitional and turbulent annular flow of drag-reducing polymer solutions. [Citation Index Journal]

Japper-Jaafar, Azuraien and Escudier, Marcel and Poole, Robert (2010) Laminar, transitional and turbulent annular flow of drag-reducing polymer solutions. [Citation Index Journal]

Mamat, Othman and B.I., Ugheoke and Ariwahjoedib, B. (2010) A brief survey of literature on Silica refractory research and development: a case for nanostructured silica obtained from rice husk ash (RHA). [Citation Index Journal] (In Press)

Mustapha, Mazli and Mamat, Othman and Hussain, P (2010) Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process. [Citation Index Journal]

Mustapha, Faizal and Mustapha, Mazli and Mamat, Othman and Hussain, P and Noorsal, Kartini (2010) Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process. [Citation Index Journal]

Vu, Trieu Minh and Fakhruldin, Bin Mohd Hashim (2010) Soft Switching System Based on Weighted Probabilities for Stochastic Hybrid Multiple Model-based Control Systems. [Citation Index Journal]

Vu, Trieu Minh and Fakhruldin, Bin Mohd Hashim (2010) Robust model predictive control schemes for tracking setpoints. [Citation Index Journal]

Vu, Trieu Minh and Idris, Bin Ibrahim (2010) RARX Estimator and Gain Scheduling Controller for On-line Fault Detection Controller. [Citation Index Journal]

Vu, Trieu Minh and Wan Mansor, Wan Muhamad (2010) Model Predictive Control of a Condensate Distillation Column. [Citation Index Journal]

Waluyo, Joko and A. Majid, M. Amin (2010) Temperature Profile and Thermocline Thickness Evaluation of a Stratified Thermal Energy Storage Tank. [Citation Index Journal]

Waluyo, Joko and Abd Majid, Mohd Amin (2010) Temperature Profile and Thermocline Thickness Evaluation of a Stratified Thermal Energy Storage Tank. [Citation Index Journal]

che ismail, mokhtar and fatah, martin choirul (2010) Empirical Equation of CO2 Corrosion with the Presence of Low Concentrations of Acetic Acid at Turbulent Flow Conditions. [Citation Index Journal]

Thesis

Aklilu, B. T. and Gilani, S. I. (2010) Mathematical modeling and statistical evaluation of cogeneration plant in tropical region. PhD. thesis, University Technology Petronas.