Items where Department / MOR is "Mechanical Engineering" and Year is 2008

Article

Ahmad, Faiz (2008) Control of defects in powder injection molded aluminum matrix composites. INTERNATIONAL JOURNAL OF POWDER METALLURGY, 44 (3 ). 69-76 . ISSN 0888-7462

Al-Kayiem, Hussain H. and Aziat, M. N. (2008) Fabrication of NACA4412 Airfoil Model by CAE for Wind Tunnel Tests. Proceedings of EnCon2008. pp. 700-705. ISSN ISBN: 778-983-9257-92-2

Chawla, B.S. and Biswas, C.K. and Das, N.S. and Khanna, I.K. (2008) Slip-line solutions for orthogonal machining with a step-type chip breaker and experimental validation of cutting parameters. Journal of the Institution of Engineers (India), Part PR: Production Engineering Division, 88 (MAR). pp. 31-36.

Chawla, B.S. and Biswas, C.K. and Das, N.S. and Khanna, I.K. (2008) Slip-line solutions for orthogonal machining with a step-type chip breaker and experimental validation of cutting parameters. Journal of the Institution of Engineers (India), Part PR: Production Engineering Division, 88 (MAR). pp. 31-36.

Gilani, S. I. and Amin, M. A. A. and Rangkuti, Chalilillah (2008) Gas District Cooling in Malaysia : Pioneering a new industry. District Energy, 94 (3). pp. 14-18. ISSN 1077-6222

Karuppanan , S and Churchman, C and Hills, D and Giner, E (2008) Sliding frictional contact between a square block and an elastically similar half-plane. European Journal of Mechanics A/Solids, 27. pp. 443-459.

Mamat, Othman and Hussain, P and Mustapha, Mazli and Ismail, Fauzi (2008) Empirical Relationship Between Relative Electrical Conductivity And Relative Density Of The Al-Foam Fabricated Through Pressure Assisted Sintering/Dissolution Process. American Institute of Physics (AIP), Volume. pp. 310-314.

Pao, William and Wong, Wallace and Lai, Adriana MK (2008) An explicit drive algorithm for aiding the design of firing sequence in side-drive micromotor. Communications in Numerical Methods in Engineering, 24 (12). pp. 2131-2136. ISSN 10698299

S., Karuppanan and A.G., Philipps and C.M., Churchman and D.A., Hills (2008) Crack tip stress intensity factors for a crack emanating from a sharp notch. Engineering Fracture Mechanics, 75 (18). pp. 5134-5139. ISSN 137944

Sulaiman, S. A. and Lawes, M. (2008) High-Speed Schlieren Imaging and Post-Processing for Investigation of Flame Propagation within Droplet-Vapour-Air Fuel Mixtures. IEM Journal, 69 (1). pp. 53-60. ISSN 0126-513X

Syed Ameer , Basha and K, Raja Gopal and S, Jebaraj (2008) A review on biodiesel production, combustion, emissions and performance. Renewable and Sustainable Energy Reviews.

Book Section

Wahab, A.A. and Kral, M.V (2008) A three dimensional view of high temperature creep damage. In: Materials Issues Governing the Performance of Advanced 21st Century Energy Systems. Science Reviews 2000, St Albans, pp. 191-194. ISBN 978-1900814430

Conference or Workshop Item

Gilani, Syed Ihtsham-ul-Haq and Baheta, Aklilu Tesfamichael and A.Majid, Mohad. Amin (2008) Thermodynamics Approach to Determine a Gas Turbine Components Design Data and Scaling Method for Performance Map Generation. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Abdul Karim, Z. A. (2008) EFFECT OF INLET AIR COOLING ON GAS TURBINE PERFORMANCE. In: International Conference on Mechanical and Manufacturing Engineering, May 2008, Johor Bahru, Malaysia.

Abdul Karim, Z. A. and Philip Waden, Augustino Yongo (2008) Development of Analytical Model for Energy Audit of Cogeneration Plant. In: 2nd Engineering Conference (ENCON 2008), 18-19 December 2008, Kuching, Sarawak.

Abdul Karim, Z. A. and Yongo A., Philip Waden (2008) Development of Analytical Model for Energy Audit of Refrigeration Systems. In: 4th International Conference on Cooling and Heating Technologies, 28-31 Oct 2008, Jinhae City, Korea.

Abdul Rani, A. M. and Anua, M. R. M. and Sulaiman, S. A. and Ahmad, Faiz and Hussain, P (2008) Case Study on Vibration Analysis of Crude Oil Transfer Pumps. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Abdul Rani, A. M. and Mun, E. T. and Sulaiman, S. A. and Hussain, P and Ahmad, Faiz (2008) Pilot Study on Laminated Tooling for Implementation of Conformal Heating Channel. In: National Conference of Design and Concurrent Engineering (DECON), October 2008, Melaka.

Abdul Rani, A. M. and Sulaiman, S. A. and Ariwahjoedi, B. (2008) Using Optical Light Microscopy and Scanning Electron Microscopy to Analyse and Quantify Flexible Polyurethane Foam Cell Size. In: 17th Scientific Conference organized by Electron Microscopy Society of Malaysia, December 2008, Shah Alam.

Abdullah , Mohamad Zaki and Pechstein, L and Lin , R. J. T. and Bhattacharyya, Debes (2008) Behaviour of Microfibrillar Composite Blends during Product Manufacturing. In: Processing and Fabrication of Advanced Materials (PFAM XVII), December 15-17, 2008, New Delhi, India.

Al-Kayiem, Hussain H. and How, MG and Nazarian, Ali (2008) Mathematical Modeling of Roof Solar Chimney for Small Scale Power Generation. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management, December 18 -19, 2008, Kuching, Sarawak, Malaysia.

Al-Kayiem, Hussain H. (2008) On-Line Measurements and Analysis of High Turbulent and Reverse Flow Fields. In: 13th International Conference on Applied Mechanics and Mechanical Engineering, 27-29 May, Cairo, Egypt.

Al-Kayiem, Hussain H. and Al-Habeeb, L.N. (2008) Performance Enhancement of Double Pipe Heat Exchangers by Enforced Turbulence on Single Surface. In: International Conference on Plant Equipment and Reliability (ICPER), 28-29 March 2008, Sunway, Malaysia.

Al-Kayiem, Hussain H. and Salih, T. W. (2008) Combined Effect Of Incidence - Forebody Angles on the Flow Structure Inside Spiked Supersonic Intakes. In: 13 International conference on Applied mechanics and Mechanical Engineering, AMME13, 27-29 May, Military Technical College, Cairo, Egypt .

Al-Neami, F. B. and Al-Kayiem, Hussain H. (2008) Hybrid Neural Networks and Genetic Algorithm for Fault Detection and Diagnosis of a Plant. In: 1st National Postgraduate Conference, NPC08, 31March to 1 April, Universiti Teknologi PETRONAS.

Alemu Lemma, Tamiru and Rangkuti, Chalilullah and Mohd Hashim, Fakhruldin (2008) Fault Detection and Diagnosis Strategies for a Cogeneration and Cooling Plant. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Amir, N. and Sudin, Mustafar and Ahmad, Faiz (2008) Adhesion Properties of Metallic Coatings on Mild Steel Substrates. In: ICPER 2008, 27-28 March 2008, Sunway Pyramid Convention Centre, Selangor.

Amir, Norlaili and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2008) Study on the Fibre Reinforced Epoxy-based Intumescent Coating Formulations and the Char Characteristics. In: ICPER2010, 15-17 June 2010, Kuala Lumpur Convention Centre.

Amir, Norlaili and Sudin, Mustafar and Ahmad, Faiz (2008) Adhesion Properties of Metallic Coatings on Mild Steel Substrates. In: ICPER 2008, 27-28 March 2008, Sunway Pyramid Convention Centre, Selangor.

Chin, Yee Sing (2008) A Study of Sawdust Combustion Using Different Combustion Models in FLUENT. In: ICPER 2008, 27-28March2008, Selangor.

Chin, Yee Sing and Al-Kayiem, Hussain H. and Mohd Shiraz, Aris and Suhaimi, Hassan (2008) Experimental Investigations on Fuel Briquettes Produced from Agricultural and Industrial Waste. In: ICPER 2008, 27-28 March 2008, Selangor.

Chin, Yee Sing and Stephenson, Peter and Wang, Meihong (2008) A CFD Study of Sawdust Combustion in a Furnace. In: 7th European Conference on Coal Research and Its Applications, 3rd-5th Sep 2008, Cardiff, UK.

D.E., Woldemichael and Bin Mohd Hashim, Fakhruldin (2008) Concept Modeler: A Computer Aided Conceptual Design Support Tool. In: In International Graduate Conference on Engineering and Science 2008 (IGCES 2008), 2008, Johor Bahru, Malaysia.

Elsaied, Waiel Kamal and Abdul Karim, Z. A. (2008) Development of a Simulation Program to Determine the Performance of Gas Turbine. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Epung Saepul, Bahrum and Zaki, Su'ud and Abdul, Waris and Bambang Ari, Wahjoedi and Dian, Fitriyani (2008) Reactor core design optimization of the 200 MWt Pb-Bi cooled fast reactor for hydrogen production. In: COE-INES 2nd International Symposium on Innovative Nuclear Energy Systems for Sustainable Development of the World, NOV 26-30, 2006, Yokohama, JAPAN.

Git, H. M. and Sulaiman, S. A. (2008) Development of Multi-Disciplinary Teamwork Skills for Engineering Undergraduates. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Ibrahim, Idris (2008) RELIABILITY IMPACTS ON THE AVAILABILITY OF TURBINE DRIVEN POWER GENERATION FOR OFFSHORE PLATFORM IN MALAYSIA. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Ibrahim, Idris and Parman, Setyamartana and Zainuddin, Azman (2008) Attitude Control of Flexible System by Shaping Constant-Amplitude Input. In: UK - MEC 2008, 14-15 July 2008, University College London, London, UK.

Jaafar, A and Escudier, Marcel and Poole, Robert (2008) Turbulent Pipe Flow of “Rod-Like” Polymer Solutions. In: The XVth International Congress on Rheology, 2008, Monterey, California.

Japper-Jaafar, Azuraien and Escudier, Marcel and Poole, Robert (2008) Turbulent Pipe Flow of “Rod-Like” Polymer Solutions. In: The XVth International Congress on Rheology, 2008, Monterey, California.

Mat Zain, R and Zainuddin, A (2008) Coordinated Control of the Dual Gantry-Tau Robot. In: ICPER 2008, 27 - 29 March 2008, Kuala Lumpur, Malaysia. (Submitted)

Nugroho, G. and A.M.S., Ali and Abdul Karim, Z. A. (2008) Empirical Reaction and Diffusion Models for Large Eddy Simulation (LES) of Low Velocity Hydrogen Diffusion Flame. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Nurul, Hasan (2008) Reviewers of Chemeca 2008, Australia. In: Chemeca 2008: Towards a Sustainable Australasia., 28th September through 1st October 2008, Newcastle, N. S. W., Australia.

Parman, Setyamartana (2008) Attitude Control of Linear System by Using Feed- Forward Constant-Amplitude Inputs. In: ICPER 2008, 27-29 March 2008, Kualalumpur, Malaysia.

Parman, Setyamartana (2008) Controlling Attitude Maneuvers of a Flexible Satellite under Low Frequency Vibration by Using Feed-Forward Constant-Amplitude Inputs. In: 13th International Meeting on Low Frequency Noise and Vibration and its Control, 21 – 23 October 2008, Tokyo, JAPAN .

Shazi, R. I. and Sulaiman, S. A. and Git, H. M. (2008) Introducing Innovation To Undergraduates Through The Engineering Team Project (ETP) Course. In: 5th International Conference on Innovation and Management, December 2008, Maastricht, The Netherlands.

Sulaiman, S. A. and Abdul Rani, A. M. and Lawes, M. (2008) Digital Post Processing Technique of Spherically Propagating Laminar Flames of Fuel-Air Mixtures. In: 2nd Engineering Conference on Sustainability, December 2008, Kuching, Malaysia.

Sulaiman, S. A. and Lawes, M. (2008) The Effect of Droplets on Natural Convection in Very Rich Iso-Octane-Air Flames. In: 13th International Conference on Applied Mechanics and Mechanical Engineering, Cairo, Egypt.

Sulaiman, S. A. and Xiong, C. Y. and Sing, C. Y. and Abdul Rani, A. M. (2008) Experimental Simulation on the Effect of Leakage of Steam to the Heat Rate of a Plant. In: 2nd Engineering Conference on Sustainablilty Engineering, December 2008, Kuching, Malaysia.

Sulaiman, S. A. and Abdul Karim, Z. A. and Lawes, M. (2008) Laser Attenuation Technique for Measurements of Droplets in a Turbulent Fuel-Air Aerosol Mixture. In: International Conference on Mechanical and Manufacturing Engineering, May 2008, Johor Bahru, Malaysia.

Sulaiman, S. A. and Abdul Rani, A. M. and Lawes, M. (2008) Multiple Laser Attenuation Technique for Determination of Monodispersity within Suspended Droplet Clouds. In: International Conference on Plant Equipment and Reliability (ICPER), March 2008, Sunway, Malaysia.

Sulaiman, S. A. and Balamohan, S. and Rangkuti, C. (2008) Studies on Suitability of Palm-Fronds for Biomass Gas Production. In: International Conference on Mechanical and Manufacturing Engineering, May 2008, Johor Bahru, Malaysia.

Sulaiman, Shaharin Anwar and Choi , Yee Xiong and Chin, Yee Sing and Ahmad Majdi , Abdul Rani (2008) 2nd Engineering Conference on Sustainable Engineering. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management, December 18 -19, 2008, Kuching, Sarawak, Malaysia.

Syed Ihtsham-ul-Haq, Gilani and A Majid, M Amin and Rangkuti, Chalillullah (2008) Reduced CO2 Emission by Cogeneration Plants: A Case Study of two Co-generated Gas District Cooling Plants in Malaysia. In: ICCHT2008 - 4th International Conference on Cooling and Heating Technologies. Jinhae, Korea, 28-31 2008, Jinhae, Korea.

T., Nagarajan and G.S., Kumar (2008) Experimental investigations on reconfigurable stewart platform for contour generation. In: 3rd International Conference on Sensing Technology, ICST 2008, 30 November 2008 through 3 December 2008, Tainan.

Wahab, A.A. and Abdul Latif, M.R. and Kral, M.V. (2008) ELECTRON BACKSCATTERED DIFFRACTION (EBSD) OF CREEP-VOID PRECIPITATES IN STEAM-METHANE REFORMER TUBES. In: 17th Scientific Conference of Electron Microscopy Society of Malaysia, December 2008, Shah Alam.

Citation Index Journal

Hussain, P and Mamat, Othman (2008) INTERDIFUSSION AND INTEREACTION OF STEEL-COMPOSITE-SIALON JOINT. [Citation Index Journal]

S, Jebaraj and S, Iniyan and L, Suganthi and R, Goic (2008) An optimal electricity allocation model for the effective utilisation of energy sources in India with focus on biofuels. [Citation Index Journal]

S., Karuppanan and D.A., Hills (2008) Frictional complete contacts between elastically similar bodies subject to normal and shear load. [Citation Index Journal]

S., Karuppanan and D.A., Hills (2008) Sliding of general frictional complete contacts. [Citation Index Journal]

V., Jha and A.A., Hon and A.G., Thomas and J.J.C., Busfield (2008) Modeling of the effect of rigid fillers on the stiffness of rubbers. [Citation Index Journal]