Items where Author is "Usman, A."

Article

Rawindran, H. and Lim, J.W. and Lam, M.K. and Supramaniam, U. and Tong, W.-Y. and Ng, H.-S. and Shahid, M.K. and Lin, C. and Usman, A. and Samdani, M.S. (2023) Assessing Microalgal Protein�s Impact on Environment and Energy Footprint via Life Cycle Analysis. Molecular Biotechnology.

Yaro, N.S.A. and Sutanto, M.H. and Baloo, L. and Habib, N.Z. and Usman, A. and Yousafzai, A.K. and Ahmad, A. and Birniwa, A.H. and Jagaba, A.H. and Noor, A. (2023) A Comprehensive Overview of the Utilization of Recycled Waste Materials and Technologies in Asphalt Pavements: Towards Environmental and Sustainable Low-Carbon Roads. Processes, 11 (7). ISSN 22279717

Leong, W.H. and Lim, J.W. and Rawindran, H. and Liew, C.S. and Lam, M.K. and Ho, Y.C. and Khoo, K.S. and Kusakabe, K. and Abdelghani, H.T.M. and Ho, C.-D. and Ng, H.-S. and Usman, A. and Kang, H.-S. (2023) Energy balance and life cycle assessments in producing microalgae biodiesel via a continuous microalgal-bacterial photobioreactor loaded with wastewater. Chemosphere, 341. ISSN 00456535

Majid, A.F.A. and Dewi, R. and Shahri, N.N.M. and Shahrin, E.W.E.S. and Kusrini, E. and Shamsuddin, N. and Lim, J.-W. and Thongratkaew, S. and Faungnawakij, K. and Usman, A. (2023) Enhancing adsorption performance of alkali activated kaolinite in the removal of antibiotic rifampicin from aqueous solution. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 676. ISSN 09277757

Shahrin, E.W.E.S. and Narudin, N.A.H. and Shahri, N.N.M. and Nur, M. and Lim, J.-W. and Bilad, M.R. and Mahadi, A.H. and Hobley, J. and Usman, A. (2023) A comparative study of adsorption behavior of rifampicin, streptomycin, and ibuprofen contaminants from aqueous solutions onto chitosan: Dynamic interactions, kinetics, diffusions, and mechanisms. Emerging Contaminants, 9 (1).

Shahri, N.N.M. and Taha, H. and S. A. Hamid, M.H. and Kusrini, E. and Lim, J.-W. and Hobley, J. and Usman, A. (2022) Antimicrobial activity of silver sulfide quantum dots functionalized with highly conjugated Schiff bases in a one-step synthesis. RSC Advances, 12 (5). pp. 3136-3146.

Chen, W.-Y. and Chan, Y.J. and Lim, J.W. and Liew, C.S. and Mohamad, M. and Ho, C.-D. and Usman, A. and Lisak, G. and Hara, H. and Tan, W.-N. (2022) Artificial Neural Network (ANN) Modelling for Biogas Production in Pre-Commercialized Integrated Anaerobic-Aerobic Bioreactors (IAAB). Water (Switzerland), 14 (9).

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Muhammad, A. (2022) Comparison of Response Surface Methodology and Artificial Neural Network approach in predicting the performance and properties of palm oil clinker fine modified asphalt mixtures. Construction and Building Materials, 324.

Suhaimi, N.A.A. and Shahri, N.N.M. and Samat, J.H. and Kusrini, E. and Lim, J.W. and Hobley, J. and Usman, A. (2022) Domination of methylene blue over rhodamine B during simultaneous photocatalytic degradation by TiO2 nanoparticles in an aqueous binary solution under UV irradiation. Reaction Kinetics, Mechanisms and Catalysis, 135 (1). pp. 511-527.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2022) Feasibility Evaluation of Waste Palm Oil Clinker Powder as a Fillers Substitute for Eco-Friendly Hot Mix Asphalt Pavement. International Journal of Pavement Research and Technology. ISSN 19966814

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zoorob, S.E. and Usman, A. (2022) Influence of nanosilica particles on the high-temperature performance of waste denim fibre-modified bitumen. International Journal of Pavement Engineering, 23 (2). pp. 207-220.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2022) Mixture Design-Based Performance Optimization via Response Surface Methodology and Moisture Durability Study for Palm Oil Clinker Fine Modified Bitumen Asphalt Mixtures. International Journal of Pavement Research and Technology.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2022) Mixture Design-Based Performance Optimization via Response Surface Methodology and Moisture Durability Study for Palm Oil Clinker Fine Modified Bitumen Asphalt Mixtures. International Journal of Pavement Research and Technology. ISSN 19966814

Musa Ardo, F. and Wei Lim, J. and Ramli, A. and Kee Lam, M. and Kiatkittipong, W. and Alaaeldin Abdelfattah, E. and Kashif Shahid, M. and Usman, A. and Wongsakulphasatch, S. and Tasnim Sahrin, N. (2022) A review in redressing challenges to produce sustainable hydrogen from microalgae for aviation industry. Fuel, 330.

Musa Ardo, F. and Wei Lim, J. and Ramli, A. and Kee Lam, M. and Kiatkittipong, W. and Alaaeldin Abdelfattah, E. and Kashif Shahid, M. and Usman, A. and Wongsakulphasatch, S. and Tasnim Sahrin, N. (2022) A review in redressing challenges to produce sustainable hydrogen from microalgae for aviation industry. Fuel, 330.

Milad, A.A. and Adwan, I. and Majeed, S.A. and Memon, Z.A. and Bilema, M. and Omar, H.A. and Abdolrasol, M.G.M. and Usman, A. and Yusoff, N.I.M. (2021) Development of a Hybrid Machine Learning Model for Asphalt Pavement Temperature Prediction. IEEE Access, 9. pp. 158041-158056.

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Abdulrahman, S. and Saeed, S.M. (2021) Irradiated polyethylene terephthalate fiber and binder contents optimization for fiber-reinforced asphalt mix using response surface methodology. Ain Shams Engineering Journal, 12 (1). pp. 271-282.

Abdulrahman, S. and Hainin, M.R. and Idham Mohd Satar, M.K. and Hassan, N.A. and Usman, A. (2021) Mechanical performance and global warming potential of unaged warm cup lump modified asphalt. Journal of Cleaner Production, 297.

Abdulrahman, S. and Hainin, M.R. and Idham Mohd Satar, M.K. and Hassan, N.A. and Usman, A. (2021) Mechanical performance and global warming potential of unaged warm cup lump modified asphalt. Journal of Cleaner Production, 297.

Yaro, N.S.A. and Napiah, M.B. and Sutanto, M.H. and Usman, A. and Saeed, S.M. (2021) Modeling and optimization of mixing parameters using response surface methodology and characterization of palm oil clinker fine modified bitumen. Construction and Building Materials, 298.

Yaro, N.S.A. and Bin Napiah, M. and Sutanto, M.H. and Usman, A. and Saeed, S.M. (2021) Performance evaluation of waste palm oil fiber reinforced stone matrix asphalt mixtures using traditional and sequential mixing processes. Case Studies in Construction Materials, 15.

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Hainin, M.R. and Usman, A. and Rafindadi, A.D. and Abdulrahman, S. and Saeed, S.M. (2021) Utilization of Palm Oil Mill Residue as Sustainable Pavement Materials: A Review. International Journal of Integrated Engineering, 13 (3). pp. 66-78.

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Hainin, M.R. and Usman, A. and Rafindadi, A.D. and Abdulrahman, S. and Saeed, S.M. (2021) Utilization of Palm Oil Mill Residue as Sustainable Pavement Materials: A Review. International Journal of Integrated Engineering, 13 (3). pp. 66-78.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zoorob, S.E. and Usman, A. (2020) Influence of nanosilica particles on the high-temperature performance of waste denim fibre-modified bitumen. International Journal of Pavement Engineering.

Rosli, S.S. and Amalina Kadir, W.N. and Wong, C.Y. and Han, F.Y. and Lim, J.W. and Lam, M.K. and Yusup, S. and Kiatkittipong, W. and Kiatkittipong, K. and Usman, A. (2020) Insight review of attached microalgae growth focusing on support material packed in photobioreactor for sustainable biodiesel production and wastewater bioremediation. Renewable and Sustainable Energy Reviews, 134.

Khan, M.I. and Sutanto, M.H. and Napiah, M.B. and Zoorob, S.E. and Yusoff, N.I.M. and Usman, A. and Memon, A.M. (2020) Irradiated polyethylene terephthalate and fly ash based grouts for semi-flexible pavement: design and optimisation using response surface methodology. International Journal of Pavement Engineering.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Usman, A. (2020) A systematic review of bio-asphalt for flexible pavement applications: Coherent taxonomy, motivations, challenges and future directions. Journal of Cleaner Production, 249.

Abdulrahman, S. and Hainin, M.R. and Satar, M.K.I.M. and Hassan, N.A. and Usman, A. (2019) Rutting and moisture damage evaluation of warm mix asphalt incorporating POFA modified bitumen. International Journal of Engineering and Advanced Technology, 9 (1). pp. 90-98.

Usman, A. and Izzaty, N. and Ibrahim, R. and Sutanto, M.H. and Sunarjono, S. (2019) Storage stability and morphology of latex modified bitumen. International Journal of Innovative Technology and Exploring Engineering, 9 (1). pp. 4435-4440.

Conference or Workshop Item

Usman, K.R. and Hainin, M.R. and Satar, M.K.I.M. and Warid, M.N.M. and Bilema, M.A. and Usman, A. and Zulfiqar, A.J. (2022) Durability of POFA-modified dense-graded cold mix asphalt. In: UNSPECIFIED.

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Yaro, N.S.A. (2022) Evaluation of optimum asphalt content and engineering properties of asphalt mixture containing irradiated waste plastic bottles granules as aggregates. In: UNSPECIFIED.

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Jagaba, A.H. and Mani, A.U. and Ahmad, A. (2022) Geopolymer utilization in the pavement industry - An overview. In: UNSPECIFIED.

Usman, A. and Sutanto, M.H. and Napiah, M. and Al-Sabaeei, A.M. and Yaro, N.S.A. and Kumalasari, I. and Saeed, S.M. (2022) Waste Polyethylene Terephthalate granules modified by gamma irradiation and their effect as fine aggregates on moisture damage of asphalt mixtures. In: UNSPECIFIED.

Yaro, N.S.A. and Napiah, M.B. and Sutanto, M.H. and Usman, A. and Murana, A.A. and Rafiq, W. (2021) Effect of Palm Oil Clinker Powder-Based Geopolymer on Bitumen and Asphalt Mixture Properties. In: UNSPECIFIED.

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Saeed, S.M. and Kaura, J.M. (2021) Influence of modification mixing parameters on conventional properties of palm oil clinker fine (POCF)-modified bitumen. In: UNSPECIFIED.

Ibrahim, M.B. and Harahap, I.S.H. and Balogun, A.-L.B. and Usman, A. (2020) The use of geospatial data from GIS in the quantitative analysis of landslides. In: UNSPECIFIED.