Items where Author is "Saad, N."

Group by: Item Type | No Grouping

Jump to: Article | Conference or Workshop Item

Number of items: 74.

Article

Mehedi, I.M. and Saad, N. and Magzoub, M.A. and Al-Saggaf, U.M. and Milyani, A.H. (2022) Simulation Analysis and Experimental Evaluation of Improved Field-Oriented Controlled Induction Motors Incorporating Intelligent Controllers. IEEE Access.

Saad, N. and Dahari, M. (2021) A Controller for Natural Gas Fuel Dispenser with Multi-Level-Pressure Banks. Studies in Systems, Decision and Control, 320. pp. 25-45.

Karim, S.A.A. and Saad, N. and Kannan, R. (2021) Preface. Studies in Systems, Decision and Control, 320. v-vi.

Shutari, H. and Saad, N. and Nor, N.B.M. and Tajuddin, M.F.N. and Alqushaibi, A. and Magzoub, M.A. (2021) Towards Enhancing the Performance of Grid-Tied VSWT via Adopting Sine Cosine Algorithm-Based Optimal Control Scheme. IEEE Access, 9. pp. 139074-139088.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Bingi, K. and Asirvadam, V.S. (2020) Filtered Predictive PI Controller for WirelessHART Networked Systems. Studies in Systems, Decision and Control, 293. pp. 27-58.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Bingi, K. and Asirvadam, V.S. (2020) Hybrid ABFA-APSO Algorithm. Studies in Systems, Decision and Control, 293. pp. 121-140.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Bingi, K. and Asirvadam, V.S. (2020) Hybrid APSOâ��Spiral Dynamic Algorithm. Studies in Systems, Decision and Control, 293. pp. 95-120.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Bingi, K. and Asirvadam, V.S. (2020) Introduction. Studies in Systems, Decision and Control, 293. pp. 1-24.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Bingi, K. and Asirvadam, V.S. (2020) Preface. Studies in Systems, Decision and Control, 293. vii-viii.

Alshorman, O. and Irfan, M. and Saad, N. and Zhen, D. and Haider, N. and Glowacz, A. and Alshorman, A. (2020) A Review of Artificial Intelligence Methods for Condition Monitoring and Fault Diagnosis of Rolling Element Bearings for Induction Motor. Shock and Vibration, 2020.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Bingi, K. and Asirvadam, V.S. (2020) WirelessHART Networked Set-Point Weighted Controllers. Studies in Systems, Decision and Control, 293. pp. 59-91.

Irfan, M. and Alwadie, A. and Saad, N. and Sheikh, M.A. (2019) Analysis of bearing faulty cage using non-intrusive condition monitoring techniques. Renewable Energy and Power Quality Journal, 17. pp. 20-25.

Irfan, M. and Saad, N. and Alwadie, A. and Awais, M. and Aman Sheikh, M. and Glowacz, A. and Kumar, V. (2019) An Automated Feature Extraction Algorithm for Diagnosis of Gear Faults. Journal of Failure Analysis and Prevention, 19 (1). pp. 98-105.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Bingi, K. (2019) Hybrid APSO-spiral dynamic algorithms with application to tuning of filtered PPI controller in a wirelessHART environment. Journal of Intelligent and Fuzzy Systems, 37 (1). pp. 597-610.

Tran, C.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Sabo Miya, H. (2018) Internal model control for industrial wireless plant using WirelessHART hardware-in-the-loop simulator. ISA Transactions, 75. pp. 236-246.

Hassan, S.M. and Ibrahim, R. and Bingi, K. and Chung, T.D. and Saad, N. (2017) Application of Wireless Technology for Control: A WirelessHART Perspective. Procedia Computer Science, 105. pp. 240-247.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2017) Comparative studies of PID controller tuning methods on a DC-DC boost converter. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. (2017) Condition monitoring of induction motors via instantaneous power analysis. Journal of Intelligent Manufacturing, 28 (6). pp. 1259-1267.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. and Ahmed, K.Y. (2017) Design and simulation of phase-shifted full bridge converter for hybrid energy systems. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. and Ahmed, K.Y. (2017) Development of Observer State Output Feedback for Phase-Shifted Full Bridge DC-DC Converter Control. IEEE Access, 5. pp. 18143-18154.

Hassan, M.A. and Malik, A.S. and Saad, N. and Fofi, D. and Meriaudeau, F. (2017) Effect of motion artifact on digital camera based heart rate measurement. Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS. pp. 2851-2854.

Chung, T.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Hassan, S.M. (2017) Effect of network induced delays on WirelessHART control system. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Chung, T.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Hassan, S.M. (2017) Energy Consumption Analysis of WirelessHART Adaptor for Industrial Wireless Sensor Actuator Network. Procedia Computer Science, 105. pp. 227-234.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Chung, T.D. (2017) Implementation of real-time WirelessHART network for control application. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Chung, T.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Hassan, S.M. (2017) Latency analysis of WirelessHART control message with variable payload. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Hassan, M.A. and Malik, A.S. and Fofi, D. and Saad, N. and Meriaudeau, F. (2017) Novel health monitoring method using an RGB camera. Biomedical Optics Express, 8 (11). pp. 4838-4854.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Magzoub, M. (2017) An Online Fault Diagnosis System for Induction Motors via Instantaneous Power Analysis. Tribology Transactions, 60 (4). pp. 592-604.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Chung, T.D. (2017) Predictive PI controller for wireless control system with variable network delay and disturbance. 2016 2nd IEEE International Symposium on Robotics and Manufacturing Automation, ROMA 2016.

Hassan, M.A. and Malik, A.S. and Saad, N. and Karasfi, B. and Fofi, D. and Sohail, W. (2017) Towards health monitoring in visual surveillance. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Chung, T.D. (2017) A filtered predictive PI controller for wirelessHART networked control system. Control Engineering and Applied Informatics, 19 (4). pp. 13-24.

Magzoub, M. and Saad, N. and Ibrahim, R. and Irfan, M. (2017) A genetic algorithm optimization of hybrid fuzzy-fuzzy rules in induction motor control. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Nor, N.M. and Alwadie, A. and Sheikh, M.A. (2017) A hardware and software integration approach for development of a non-invasive condition monitoring systems for motor-coupled gears faults diagnosis. Communications in Computer and Information Science, 751. pp. 642-655.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Magzoub, M. (2016) An Intelligent Fault Diagnosis of Induction Motors in an Arbitrary Noisy Environment. Journal of Nondestructive Evaluation, 35 (1). pp. 1-13.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2016) PID controller response to set-point change in DC-DC converter control. International Journal of Power Electronics and Drive Systems, 7 (2). pp. 294-302.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2016) State-space Modelling and Digital Controller Design for DC-DC Converter. Telkomnika (Telecommunication Computing Electronics and Control), 14 (2). pp. 497-506.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Hung, N.T. and Magzoub, M.A. (2015) Analysis of Bearing Surface Roughness Defects in Induction Motors. Journal of Failure Analysis and Prevention, 15 (5). pp. 730-736.

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2015) Operation and control of split-parallel, through-theroad hybrid electric vehicle with in-wheel motors. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2793-2808.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. (2015) An on-line condition monitoring system for induction motors via instantaneous power analysis. Journal of Mechanical Science and Technology, 29 (4). pp. 1483-1492.

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2014) Impact of motor size &efficiency on acceleration, Fuel consumption &Emissions of split- axle through- the- road parallel hybrid electric vehicle. Applied Mechanics and Materials, 663. pp. 498-503.

Conference or Workshop Item

Magsi, S.A. and Saad, N. and Khir, M.H.B.M. and Witjaksono, G. and Siddiqui, M.A. and Sameer, L. (2021) Wi-Fi Based Indoor Navigation System For Campus Directions. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ali, A. and Vinoth Kumar, K. and Aman Sheikh, M. and Awais, M. (2019) A Condition Monitoring System for the Analysis of Bearing Distributed Faults. In: UNSPECIFIED.

Amirudin, N.A.B. and Saad, N. and Ali, S.S.A. and Adil, S.H. (2019) Detection and Analysis of Driver Drowsiness. In: UNSPECIFIED.

Chung, T.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Hassan, S.M. (2016) Internal model control for industrial wireless plant subject to measured round trip delays. In: UNSPECIFIED.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Chung, T.D. (2016) Setpoint weighted wirelesshart networked control of process plant. In: UNSPECIFIED.

Zulkifli, S.A. and Syaifuddin Mohd, M. and Maharun, M. and Bakar, N.S.A. and Idris, S. and Samsudin, S.H. and Firmansyah, F. and Adz, J.J. and Misbahulmunir, M. and Abidin, E.Z.Z. and Syafiq Mohd, M. and Saad, N. and Aziz, A.R.A. (2015) Design and development of split-parallel through-the road retrofit hybrid electric vehicle with in-wheel motors. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Tuan Hung, N. (2015) Diagnosis of distributed faults in outer race of bearings via Park's transformation method. In: UNSPECIFIED.

Subhani, A.R. and Malik, A.S. and Kamel, N. and Saad, N. and Nandagopal, D.N. (2015) Experimental evidence for the effects of the Demand-Control model on the cognitive arousal: An EEG based study. In: UNSPECIFIED.

Zulkifli, S.A. and Mohd, S. and Jamali, A.J. and Kurniawan, Y. and Saad, N. and Aziz, A.R.A. (2015) Implementation of energy management system for a split-parallel hybrid electric vehicle with in-wheel motors. In: UNSPECIFIED.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. and Umar, M.W. (2015) Matlab/Simulink model of solar PV array with perturb and observe MPPT for maximising PV array efficiency. In: UNSPECIFIED.

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2015) Operation, power flow, system architecture and control challenges of split-parallel through-the-road hybrid electric vehicle. In: UNSPECIFIED.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2015) Single phase inverter with wide-input voltage range for solar photovoltaic application. In: UNSPECIFIED.

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2015) Split-parallel through-the-road hybrid electric vehicle: Operation, power flow and control modes. In: UNSPECIFIED.

Haider, N. and Imran, M. and Younis, M. and Saad, N. and Guizani, M. (2015) A novel mechanism for restoring actor connected coverage in wireless sensor and actor networks. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Hung, N.T. (2014) Analysis of bearing outer race defects in induction motors. In: UNSPECIFIED.

Zulkifli, S.A. and Asirvadam, V.S. and Saad, N. and Aziz, A.R.A. and Mohideen, A.A.M. (2014) Implementation of electronic throttle-by-wire for a hybrid electric vehicle using National Instruments' CompactRIO and LabVIEW Real-Time. In: UNSPECIFIED.

Asirvadam, V.S. and Fen, C.P. and Saad, N. and Sebastian, P. and Altahir, A.A. and Ali, A. and Hamid, N.H. (2014) Risk map for video surveillance CCTV. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Hung, N.T. (2014) A non invasive fault diagnosis system for induction motors in noisy environment. In: UNSPECIFIED.

Mohd, S. and Zulkifli, S.A. and Rangkuti, R.G.A. and Ovinis, M. and Saad, N. (2013) Electric vehicle energy management system using National Instruments' CompactRIO and LabVIEW. In: UNSPECIFIED.

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2013) Influence of motor size and efficiency on acceleration, fuel economy and emissions of split-parallel hybrid electric vehicle. In: UNSPECIFIED.

This list was generated on Thu Nov 21 23:01:16 2024 +08.