Items where Author is "Othman, A.R."

Article

Shaik, N.B. and Pedapati, S.R. and Othman, A.R. and Dzubir, F.A.B.A. (2023) A Case Study to Predict Structural Health of a Gasoline Pipeline Using ANN and GPR Approaches. Lecture Notes in Mechanical Engineering. pp. 611-624. ISSN 21954356

Al-Kayiem, H.H. and Othman, A.R. and Abed, A.B. and Tukkee, A.M. (2023) Experimental Evaluation of Drag Reduction in Pipe Flow Using Streamlined Turbulence Modifiers. Lecture Notes in Mechanical Engineering. pp. 237-248.

Alzakri Ekhwan, I. and Othman, A.R. and Franzen, A. and Othman, M.F. and Ishak, A. (2023) Leakage Quantification of Bolted Flange Joint Subjected to Different Bolt Sizes and External Load. Lecture Notes in Mechanical Engineering. pp. 741-752. ISSN 21954356

Zulkifli, N.A. and Ismail, N.H. and Jaafar, M. and Othman, A.R. (2022) Effect of carbon nanotubes on the flexural properties and flammability of carbon fibre/epoxy multi-scale composites Auswirkung von Kohlenstoffnanoröhrchen auf die Biegeeigenschaften und die Entflammbarkeit von mehrskaligen Kohlenstofffaser/Epoxid-Verbundwerkstoffen. Materialwissenschaft und Werkstofftechnik, 53 (12). pp. 1544-1550.

Sattar, M. and Othman, A.R. and Kamaruddin, S. and Akhtar, M. and Khan, R. (2022) Limitations on the computational analysis of creep failure models: A review. Engineering Failure Analysis, 134.

Sattar, M. and Othman, A.R. and Kamaruddin, S. and Akhtar, M. and Khan, R. (2022) Limitations on the computational analysis of creep failure models: A review. Engineering Failure Analysis, 134.

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ud Din, I. and Othman, A.R. and Sharp, K. and Gerard, P. (2021) Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites. Composites Part B: Engineering, 207.

Sattar, M. and Othman, A.R. and Kamaruddin, S. and Alam, M.A. and Azeem, M. (2021) Creep parameters determination by omega model to norton bailey law by regression analysis for austenitic steel ss-304. Solid State Phenomena, 324 SS. pp. 188-197.

Umar, S.N.H. and Akhtar, M.N. and Bakar, E.A. and Kamaruddin, N.M. and Othman, A.R. (2020) Development of heavy metal potentiostat for batik industry. Applied Sciences (Switzerland), 10 (21). pp. 1-12.

Umar, S.N.H. and Akhtar, M.N. and Bakar, E.A. and Kamaruddin, N.M. and Othman, A.R. (2020) Development of heavy metal potentiostat for batik industry. Applied Sciences (Switzerland), 10 (21). pp. 1-12.

Akhtar, M.N. and Ahmed, W. and Kakar, M.R. and Bakar, E.A. and Othman, A.R. and Bueno, M. (2020) Implementation of Parallel K-Means Algorithm to Estimate Adhesion Failure in Warm Mix Asphalt. Advances in Civil Engineering, 2020.

Zakaria, Z.A. and Mohd Jasri, M.A.H. and Yaacob, A. and Hasan, K.N.M. and Othman, A.R. (2019) Effect of Bevel Angle and Welding Current on T-Joint Using Gas Metal Arc Welding (GMAW). Lecture Notes in Mechanical Engineering. pp. 49-57.

Zakaria, Z.A. and Mohd Jasri, M.A.H. and Yaacob, A. and Hasan, K.N.M. and Othman, A.R. (2019) Effect of Bevel Angle and Welding Current on T-Joint Using Gas Metal Arc Welding (GMAW). Lecture Notes in Mechanical Engineering. pp. 49-57.

Zakaria, Z.A. and Mohd Jasri, M.A.H. and Yaacob, A. and Hasan, K.N.M. and Othman, A.R. (2019) Effect of Bevel Angle and Welding Current on T-Joint Using Gas Metal Arc Welding (GMAW). Lecture Notes in Mechanical Engineering. pp. 49-57.

Mustapa, M.A. and Othman, W.A.F.W. and Abu Bakar, E. and Othman, A.R. (2018) Development of pole-like tree spiral climbing robot. Lecture Notes in Mechanical Engineering (978981). pp. 285-293.

Mustapa, M.A. and Othman, W.A.F.W. and Abu Bakar, E. and Othman, A.R. (2018) Development of pole-like tree spiral climbing robot. Lecture Notes in Mechanical Engineering (978981). pp. 285-293.

Othman, A.R. and Hassan, M.H. and Abu Bakar, E. and Othman, W.A.F.W. (2018) Statistical analysis of the machining parameters in drilling of carbon fibre reinforced plastics (CFRP) composite with various drill types. Lecture Notes in Mechanical Engineering (978981). pp. 141-154.

Othman, A.R. and Hassan, M.H. and Abu Bakar, E. and Othman, W.A.F.W. (2018) Statistical analysis of the machining parameters in drilling of carbon fibre reinforced plastics (CFRP) composite with various drill types. Lecture Notes in Mechanical Engineering (978981). pp. 141-154.

Abu Bakar, E. and Othman, W.A.F.W. and Othman, A.R. (2018) Systematic approach for uncertainty delta E data for composites panel coating analysis. Lecture Notes in Mechanical Engineering (978981). pp. 131-140.

Abu Bakar, E. and Othman, W.A.F.W. and Othman, A.R. (2018) Systematic approach for uncertainty delta E data for composites panel coating analysis. Lecture Notes in Mechanical Engineering (978981). pp. 131-140.

Sukeri, M. and Paiz Ismadi, M.Z. and Othman, A.R. and Kamaruddin, S. (2018) Wear Detection of Drill Bit by Image-based Technique. IOP Conference Series: Materials Science and Engineering, 328 (1).

Hassan, M.H. and Othman, A.R. (2017) Contribution of processing parameters on void content in the vacuum bagging configurations of L-shaped composite laminates. International Journal of Advanced Manufacturing Technology, 93 (1-4). pp. 1333-1345.

Zakaria, Z.A. and Hasan, K.N.M. and Razak, M.F.A. and Yaacob, A. and Othman, A.R. (2017) Experimental study on tensile strength of butt joints for mild steel with thickness 6mm using Gas Metal Arc Welding (GMAW). Key Engineering Materials, 740 KE. pp. 155-160.

Othman, A.R. and Jadee, K.J. and Ismadi, M.-Z. (2017) Mitigating stress concentration through defense hole system for improvement in bearing strength of composite bolted joint, Part 1: Numerical analysis. Journal of Composite Materials, 51 (26). pp. 3685-3699.

Hassan, M.H. and Othman, A.R. and Kamaruddin, S. (2017) The use of response surface methodology (RSM) to optimize the acid digestion parameters in fiber volume fraction test of aircraft composite structures. International Journal of Advanced Manufacturing Technology, 90 (9-12). pp. 3739-3748.

Othman, A.R. and Jadee, K.J. (2016) Specific bearing strength of bolted composite joint with different glass fiber reinforcement. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12039-12044.

Othman, A.R. and Jadee, K.J. (2016) Specific bearing strength of bolted composite joint with different glass fiber reinforcement. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12039-12044.

Mahmod, M.F. and Bakar, E.A. and Othman, A.R. and Ramzi, A.R. and Goh, C.Y. (2015) Fiber glass composite laminates (FGCL) measurement using 3 axis pulse echo scanning unit. Jurnal Teknologi, 76 (1). pp. 147-155.

Mahmod, M.F. and Bakar, E.A. and Othman, A.R. and Ramzi, A.R. and Goh, C.Y. (2015) Fiber glass composite laminates (FGCL) measurement using 3 axis pulse echo scanning unit. Jurnal Teknologi, 76 (1). pp. 147-155.

Conference or Workshop Item

Muhaimin Ishak, M.I. and Lemma, T.A. and Muhammad Daud, M.H. and Fatimi, N.M. and Rahman, A.R.A. and Rahman, A.A. and Othman, A.R. (2022) IGUSA: Prediction of Ultimate Strength of Fixed Offshore Structures in Malaysian Waters Using Machine Learning Techniques. In: UNSPECIFIED.