Items where Author is "Mohamed , N.M."

Article

Ullah, F. and Mohamed, N.M. and Kait, C.F. and Ghani, U. and Saheed, M.S.M. (2022) A DFT+U approach: Superior charge transfer characteristics and optoelectronic properties of GQD@TiO2 rutile (110) surface for improved hydrogen evolution. Surfaces and Interfaces, 30.

Ullah, F. and Mohamed, N.M. and Ghani, U. and Saheed, M.S.M. (2022) First Principle DFT + U Calculations for the Optoelectronic Properties of Cu and C-Cu co-doped TiO2Anatase Model. Asian Journal of Chemistry, 34 (7). pp. 1863-1868.

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Saheed, M.S.M. and Jose, R. (2022) Optoelectronic Enhancement of Perovskite Solar Cells through the Incorporation of Plasmonic Particles. Micromachines, 13 (7).

Hilmy, N.I.M.F. and Yahya, W.Z.N. and Zaine, S.N.A. and Mohamed, N.M. (2022) Photovoltaic performance of eutectic ionic liquids as potential electrolytes in dye-sensitized solar cells. Materials Today: Proceedings, 60. pp. 1108-1112.

Subramani, I.G. and Perumal, V. and Gopinath, S.C.B. and Mohamed, N.M. and Ovinis, M. and Sze, L.L. (2021) 1,1'-Carbonyldiimidazole-copper nanoflower enhanced collapsible laser scribed graphene engraved microgap capacitive aptasensor for the detection of milk allergen. Scientific Reports, 11 (1).

Umrani, Z.A. and Khatani, M. and Uqaili, M.A. and Mohamed, N.M. and Hamid, N.H. and Chowdhary, B.S. (2021) Dye sensitised solar power generating window: Towards environmentally sustainable energy efficiency in ICT. International Journal of Computer Aided Engineering and Technology, 14 (2). pp. 255-277.

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Shahid, M.U. (2021) Enhancement of charge transport of a dye-sensitized solar cell utilizing tio2 quantum dot photoelectrode film. Coatings, 11 (12).

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2021) Stability Analysis of Partial Slip Texture Journal Bearing. Lecture Notes in Mechanical Engineering. pp. 217-225.

Subramani, I.G. and Perumal, V. and Gopinath, S.C.B. and Mohamed, N.M. and Joshi, N. and Ovinis, M. and Sze, L.L. (2020) 3D nanoporous hybrid nanoflower for enhanced non-faradaic redox-free electrochemical impedimetric biodetermination. Journal of the Taiwan Institute of Chemical Engineers, 116. pp. 26-35.

Vasudevan, M. and Tai, M.J.Y. and Perumal, V. and Gopinath, S.C.B. and Murthe, S.S. and Ovinis, M. and Mohamed, N.M. and Joshi, N. (2020) Highly sensitive and selective acute myocardial infarction detection using aptamer-tethered MoS2 nanoflower and screen-printed electrodes. Biotechnology and Applied Biochemistry.

Ong, C.C. and Mohamed, N.M. and Saheed, M.S.M. (2020) Hollow three-dimensional graphene reinforced with poly (methyl methacrylate) for selective absorption of oil. Fullerenes Nanotubes and Carbon Nanostructures, 29 (2). pp. 149-155.

Yar, A. and Dennis, J.O. and Mohamed Saheed, M.S. and Mohamed, N.M. and Irshad, M.I. and Mumtaz, A. and Jose, R. (2020) Physical reduction of graphene oxide for supercapacitive charge storage. Journal of Alloys and Compounds, 822.

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Zaine, S.N.A. and Bashiri, R. and Khatani, M. and Samsudin, A.E. (2020) Solvent exfoliated graphene incorporated mixed phase TiO2 transparent photoelectrode for the efficient and color transparent dye-sensitized solar cell. Solar Energy, 206. pp. 317-329.

Rao, T.V.V.L.N. and A Rani, A.M. and Mohamed, N.M. and Ya, H.H. and Awang, M. and M Hashim, F. (2020) Static and stability analysis of partial slip texture multi-lobe journal bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234 (4). pp. 567-587.

Yahya, W.Z.N. and Hong, P.Z. and Zain, W.Z. and Mohamed, N.M. (2020) Tripropyl Chitosan iodide-based gel polymer electrolyte as quasi solid-state dye sensitized solar cells. Materials Science Forum, 997 MS. pp. 69-76.

Yahya, W.Z.N. and Hong, P.Z. and Zain, W.Z. and Mohamed, N.M. (2020) Tripropyl Chitosan iodide-based gel polymer electrolyte as quasi solid-state dye sensitized solar cells. Materials Science Forum, 997 MS. pp. 69-76.

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2019) Analysis of magnetohydrodynamic partial slip laser bump texture slider and journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 233 (12). pp. 1921-1938.

Lim, C.E. and Ooi, M.L. and Wong, R.C.S. and Neo, K.E. and Mumtaz, A. and Mazhar, M. and Mohamed, N.M. and Saheed, M.S.M. (2019) Facile synthesis of molybdenum multisulfide composite nanorod arrays from single-source precursor for photoelectrochemical hydrogen generation. Applied Nanoscience (Switzerland), 9 (6). pp. 1281-1292.

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Bashiri, R. and Shamsudin, A.E. and Zaine, S.N.A. (2019) Few-layer graphene supported polyaniline (PANI) film as a transparent counter electrode for dye-sensitized solar cells. Diamond and Related Materials, 94. pp. 242-251.

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Samsudin, A.E. and Shahid, M.U. (2019) Improving the light scattering efficiency of photoelectrode dye-sensitized solar cell through optimization of core-shell structure. Materials Today Communications, 19. pp. 220-229.

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Samsudin, A.E. and Shahid, M.U. (2019) Improving the light scattering efficiency of photoelectrode dye-sensitized solar cell through optimization of core-shell structure. Materials Today Communications, 19. pp. 220-229.

Bashiri, R. and Mohamed, N.M. and Ling, L.Y. and Suhaimi, N.A. and Shahid, M.U. and Sufian, S. and Kait, C.F. and Saheed, S.M. (2019) Influence of seeding layer on photoelectrochemical hydrogen production over TiO 2 nanorod decorated with reduced graphene oxide. Diamond and Related Materials, 94. pp. 194-202.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. (2019) Optimization of hydrogen production over TiO2 supported copper and nickel oxides: effect of photoelectrochemical features. Journal of Applied Electrochemistry, 49 (1). pp. 27-38.

Shukrullah, S. and Naz, M.Y. and Mohamed, N.M. and Ibrahim, K.A. and Ghaffar, A. and AbdEl-Salam, N.M. (2019) Production of bundled CNTs by floating a compound catalyst in an atmospheric pressure horizontal CVD reactor. Results in Physics, 12. pp. 1163-1171.

Mohamed Saheed, M.S. and Mohamed, N.M. and Mahinder Singh, B.S. and Jose, R. (2019) Surface Plasmon Assisted Electron-Hole Migration for High Photocurrent Density Generation in a Perovskite Solar Cell. ACS Applied Energy Materials, 2 (12). pp. 8707-8714.

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Shahid, M.U. (2018) Effect of paste viscosity on direct-current resistance in improving the efficiency of dye-sensitized solar cell. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 73-78.

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Shahid, M.U. (2018) Effect of paste viscosity on direct-current resistance in improving the efficiency of dye-sensitized solar cell. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 73-78.

Samsudin, M.F.R. and Sufian, S. and Mohamed, N.M. and Bashiri, R. and Wolfe, F. and Ramli, R.M. (2018) Enhancement of hydrogen production over screen-printed TiO2/BiVO4 thin film in the photoelectrochemical cells. Materials Letters, 211. pp. 13-16.

Perumal, V. and Saheed, M.S.M. and Mohamed, N.M. and Saheed, M.S.M. and Murthe, S.S. and Gopinath, S.C.B. and Chiu, J.-M. (2018) Gold nanorod embedded novel 3D graphene nanocomposite for selective bio-capture in rapid detection of Mycobacterium tuberculosis. Biosensors and Bioelectronics, 116. pp. 116-122.

Perumal, V. and Saheed, M.S.M. and Mohamed, N.M. and Saheed, M.S.M. and Murthe, S.S. and Gopinath, S.C.B. and Chiu, J.-M. (2018) Gold nanorod embedded novel 3D graphene nanocomposite for selective bio-capture in rapid detection of Mycobacterium tuberculosis. Biosensors and Bioelectronics, 116. pp. 116-122.

Mumtaz, A. and Mohamed, N.M. and Irshad, M.I. and Yar, A. and Mohamed Saheed, M.S. (2018) Mutual effect of extrinsic defects and electronic carbon traps of M-TiO2 (M = V, Co, Ni) nanorod arrays on photoexcited charge extraction of CdS for superior photoelectrochemical activity of hydrogen production. International Journal of Hydrogen Energy, 43 (31). pp. 14388-14405.

Mumtaz, A. and Mohamed, N.M. and Irshad, M.I. and Yar, A. and Mohamed Saheed, M.S. (2018) Mutual effect of extrinsic defects and electronic carbon traps of M-TiO2 (M = V, Co, Ni) nanorod arrays on photoexcited charge extraction of CdS for superior photoelectrochemical activity of hydrogen production. International Journal of Hydrogen Energy, 43 (31). pp. 14388-14405.

Faez, K.M. and Hamdavi, S. and Rao, T.V.V.L.N. and Ya, H.H. and Mohamed, N.M. (2018) Performance analysis of grooved hydrodynamic journal bearing with multi- depth textured surface. International Journal of Vehicle Structures and Systems, 10 (2). pp. 142-145.

Faez, K.M. and Hamdavi, S. and Rao, T.V.V.L.N. and Ya, H.H. and Mohamed, N.M. (2018) Performance analysis of grooved hydrodynamic journal bearing with multi- depth textured surface. International Journal of Vehicle Structures and Systems, 10 (2). pp. 142-145.

Mohamed, N.M. and Bashiri, R. and Kait, C.F. and Sufian, S. (2018) Photocatalytic water splitting over titania supported copper and nickel oxide in photoelectrochemical cell; Optimization of photoconversion efficiency. IOP Conference Series: Materials Science and Engineering, 348 (1).

Bashiri, R. and Mohamed, N.M. and Suhaimi, N.A. and Shahid, M.U. and Kait, C.F. and Sufian, S. and Khatani, M. and Mumtaz, A. (2018) Photoelectrochemical water splitting with tailored TiO2/SrTiO3@g-C3N4 heterostructure nanorod in photoelectrochemical cell. Diamond and Related Materials, 85. pp. 5-12.

Bashiri, R. and Mohamed, N.M. and Suhaimi, N.A. and Shahid, M.U. and Kait, C.F. and Sufian, S. and Khatani, M. and Mumtaz, A. (2018) Photoelectrochemical water splitting with tailored TiO2/SrTiO3@g-C3N4 heterostructure nanorod in photoelectrochemical cell. Diamond and Related Materials, 85. pp. 5-12.

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2017) Applications of Taguchi method for optimization of dye solar cell design. Sains Malaysiana, 46 (3). pp. 503-508.

Yahya, W.Z.N. and Meng, W.T. and Khatani, M. and Samsudin, A.E. and Mohamed, N.M. (2017) Bio-based chitosan/PVdF-HFP polymer-blend for quasi-solid state electrolyte dye-sensitized solar cells. E-Polymers, 17 (5). pp. 355-361.

Ismail, M. and Ludin, N.A. and Hamid, N.H. and Ibrahim, M.A. and Zulfakar, M.S. and Mohamed, N.M. and Sopian, K. (2017) Characterizations of natural dye from garcinia mangostana with graphene oxide (GO) as sensitizer in dye-sensitizer solar cells. AIP Conference Proceedings, 1838.

Emamian, S. and Hussain, P. and Awang, M. and Arumugam, T. and Yusof, F. and Saheed, M.S.M. and Mohamed, N.M. (2017) Comparison of carbon-based nanomaterials characteristics on H13 tool steel: Vergleich der Eigenschaften Kohlenstoff-basierter Nanomaterialien auf H13 Werkzeugstahl. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 198-204.

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Perumal, V. and Saheed, M.S.M. (2017) DC magnetron sputtered TiO2 thin film as efficient hole blocking layer for perovskite solar cell. Proceedings of the 2017 IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2017. pp. 46-49.

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2017) Dye solar cell design parameter optimization using Silvaco ATHENA and ATLAS. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Bashiri, R. and Mohamed, N.M. and Fai Kait, C. and Sufian, S. and Khatani, M. (2017) Enhanced hydrogen production over incorporated Cu and Ni into titania photocatalyst in glycerol-based photoelectrochemical cell: Effect of total metal loading and calcination temperature. International Journal of Hydrogen Energy, 42 (15). pp. 9553-9566.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. and Khatani, M. (2017) Enhancing photoelectrochemical hydrogen production over Cu and Ni doped titania thin film: Effect of calcination duration. Journal of Environmental Chemical Engineering, 5 (4). pp. 3207-3214.

Kang, C.H. and Obama, M.P.E.M. and Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2017) Facile formation of interconnected multi-walled carbon nanotube-graphene nanocomposite for nanoelectronics applications. Key Engineering Materials, 744. pp. 433-437.

Shahid, M.U. and Mohamed, N.M. and Khatani, M. and Muhsan, A.S. and Samsudin, A. and Irshad, M.I. and Zaine, S.N.A. (2017) Graphene modified FTO/TiO2 interface photoelectrode for improved performance of dye sensitized solar cells. AIP Conference Proceedings, 1901.

Faez, K.M. and Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. and Mohamed, N.M. (2017) Performance analysis of long grooved journal bearing with slip, no-slip, and slip/no-slip textured surface configurations. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5794-5798.

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Saheed, M.S.M. (2017) Precursor and pressure dependent 3D graphene: A study on layer formation and type of carbon material. Diamond and Related Materials, 79. pp. 93-101.

Kang, C.H. and Burhanudin, Z.A. and Saheed, M.S.M. and Mohamed, N.M. (2017) Synthesis parameters and transfer techniques of mono-few layer graphene for transparent conductive electrode. International Conference on Intelligent and Advanced Systems, ICIAS 2016.

Perumal, V. and Mohamed, N.M. and Saheed, M.S.M. and Saheed, M.S.M. (2017) Template-assisted growth of highly oriented 3D graphene pH sensor towards new avenues for biosensor. Proceedings of the 2017 IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2017. pp. 50-53.

Kang, C.H. and Shen, C. and Saheed, M.S.M. and Mohamed, N.M. and Ng, T.K. and Ooi, B.S. and Burhanudin, Z.A. (2016) Carbon nanotube-graphene composite film as transparent conductive electrode for GaN-based light-emitting diodes. Applied Physics Letters, 109 (8).

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Saheed, M.S.M. and Irshad, M.I. (2016) Effect of CVD Process Temperature on Activation Energy and Structural Growth of MWCNTs. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47 (3). pp. 1413-1424.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Saheed, M.S.M. and Irshad, M.I. (2016) Effect of CVD Process Temperature on Activation Energy and Structural Growth of MWCNTs. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47 (3). pp. 1413-1424.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2016) Effect of Ethylene Flow Rate and CVD Process Time on Diameter Distribution of MWCNTs. Materials and Manufacturing Processes, 31 (12). pp. 1537-1542.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2016) Effect of Ethylene Flow Rate and CVD Process Time on Diameter Distribution of MWCNTs. Materials and Manufacturing Processes, 31 (12). pp. 1537-1542.

Muhsan, A.S. and Mohamed, N.M. and Ahmad, F. and Albarody, T.M.B. and Shahid, M.U. (2016) Effects of sintering parameters on the microstructural characteristics of cu/cnts nanocomposites. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14294-14298.

Muhsan, A.S. and Mohamed, N.M. and Ahmad, F. and Albarody, T.M.B. and Shahid, M.U. (2016) Effects of sintering parameters on the microstructural characteristics of cu/cnts nanocomposites. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14294-14298.

Assadi, M.K. and Hanaei, H. and Mohamed, N.M. and Saidur, R. and Bakhoda, S. and Bashiri, R. and Moayedfar, M. (2016) Enhancing the efficiency of luminescent solar concentrators (LSCs). Applied Physics A: Materials Science and Processing, 122 (9).

Irshad, M.I. and Mohamed, N.M. and Abdullah, M.Z. and Saheed, M.S.M. and Mumtaz, A. and Yasar, M. and Yar, A. and Zeeshan, M.A. and Sort, J. (2016) Influence of the electrodeposition potential on the crystallographic structure and effective magnetic easy axis of cobalt nanowires. RSC Advances, 6 (17). pp. 14266-14272.

Mohamed, N.M. and Irshad, M.I. and Abdullah, M.Z. and Saheed, M.S.M. (2016) Novel growth of carbon nanotubes on nickel nanowires. Diamond and Related Materials, 65. pp. 59-64.

Mohamed, N.M. and Irshad, M.I. and Abdullah, M.Z. and Saheed, M.S.M. (2016) Novel growth of carbon nanotubes on nickel nanowires. Diamond and Related Materials, 65. pp. 59-64.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. and Kakooei, S. and Khatani, M. and Gholami, Z. (2016) Optimization hydrogen production over visible light-driven titania-supported bimetallic photocatalyst from water photosplitting in tandem photoelectrochemical cell. Renewable Energy, 99. pp. 960-970.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. and Kakooei, S. and Khatani, M. and Gholami, Z. (2016) Optimization hydrogen production over visible light-driven titania-supported bimetallic photocatalyst from water photosplitting in tandem photoelectrochemical cell. Renewable Energy, 99. pp. 960-970.

Hanaei, H. and Assadi, M.K. and Mohamed, N.M. and Bashiri, R. (2016) A theoretical investigation into the performance of swcnts as an antireflection coating layer for silicon solar cell. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12094-12098.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. (2015) Optimum temperature on structural growth of multiwalled carbon nanotubes with low activation energy. Diamond and Related Materials, 58. pp. 129-138.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. (2015) Optimum temperature on structural growth of multiwalled carbon nanotubes with low activation energy. Diamond and Related Materials, 58. pp. 129-138.

Mohamed, N.M. and Khatani, M. and Hamid, N.H. and Sahmer, A.Z. and Zaine, S.N.A. (2015) Performance analysis of dye solar cell with additional TiO2 layer under different light Intensities. Materials Science in Semiconductor Processing, 38. pp. 381-386.

Mohamed, N.M. and Khatani, M. and Hamid, N.H. and Sahmer, A.Z. and Zaine, S.N.A. (2015) Performance analysis of dye solar cell with additional TiO2 layer under different light Intensities. Materials Science in Semiconductor Processing, 38. pp. 381-386.

Mohamed, N.M. and Bashiri, R. and Chong, F.K. and Sufian, S. and Kakooei, S. (2015) Photoelectrochemical behavior of bimetallic Cu-Ni and monometallic Cu, Ni doped TiO2 for hydrogen production. International Journal of Hydrogen Energy, 40 (40). pp. 14031-14038.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2015) Thermal conductivity of powder injection molded carbon nanotube-reinforced copper-matrix composites. International Journal of Powder Metallurgy, 51 (1). pp. 57-66.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. (2014) Application of experimental statistical method in optimizing preparation variables for Cu-Ni/TiO2 photocatalyst. Applied Mechanics and Materials, 625. pp. 856-859.

Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2014) Breakdown voltage reduction by field emission in multi-walled carbon nanotubes based ionization gas sensor. Applied Physics Letters, 104 (12).

Rahmam, S. and Mohamed, N.M. and Sufian, S. (2014) Effect of acid treatment on the multiwalled carbon nanotubes. Materials Research Innovations, 18. S6-196-S6-199.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2014) Effect of ferrocene concentration on the quality of multiwalled CNTs grown by floating catalytic chemical vapor deposition technique. Main Group Chemistry, 13 (3). pp. 251-259.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Megat Yusoff, P.S.M. and Raza, M.R. (2014) Homogeneous distribution of carbon nanotubes in copper matrix nanocomposites fabricated via combined technique. Nanoscience and Nanotechnology Letters, 6 (10). pp. 865-874.

Zaine, S.N.A. and Mohamed, N.M. and Bustam, M.A. (2014) Optimized TiO2 nanocrystallites aggregates for enhanced efficiency in dye solar cells. Advanced Materials Research, 917. pp. 35-44.

Irshad, M.I. and Ahmad, F. and Mohamed, N.M. and Abdullah, M.Z. (2014) Preparation and structural characterization of template assisted electrodeposited copper nanowires. International Journal of Electrochemical Science, 9 (5). pp. 2548-2555.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2013) Fabrication and microstructural analysis of CNTs reinforced copper matrix nanocomposites via MIM technique. Applied Mechanics and Materials, 459. pp. 11-17.

Mohamed , N.M. (2010) Ionization-based Gas Sensor Using Aligned MWCNTs Array. IEEE Conf on Semiconductor Electronics, ICSE 2010. pp. 272-274. ISSN 978-142446609-2

Conference or Workshop Item

Soaid, N.I. and Hizam, S.M.M. and Saheed, M.S.M. and Mohamed, N.M. and Kait, C.F. (2023) A Simple Chemical Processing Route in Order to Obtain High Purity Graphene. In: UNSPECIFIED.

Hizam, S.M.M. and Soaid, N.I. and Saheed, M.S.M. and Mohamed, N.M. and Kait, C.F. (2023) Synthesis and Characterization of Tungsten-metal-organic Framework/Pyrrole-reduced Graphene Oxide. In: UNSPECIFIED.

Ullah, F. and Mohamed, N.M. and Mohamed Saheed, M.S. and Kait, C.F. (2022) Density Functional Theory Calculations for the Electronic Structure of Carbon and Copper Co-Doped TiO2 Rutile Model. In: UNSPECIFIED.

Abbasi, S. and Mohamed, N.M. and Singh, B.S.M. and Mumtaz, A. and Saheed, M.S.M. (2021) Effect of Nickel Doping on the Optical and Morphological Properties of Titanium Dioxide Nanotubes. In: UNSPECIFIED.

Abbasi, S. and Mohamed, N.M. and Singh, B.S.M. and Mumtaz, A. and Saheed, M.S.M. (2021) Effect of Nickel Doping on the Optical and Morphological Properties of Titanium Dioxide Nanotubes. In: UNSPECIFIED.

Ramly, K. and Mohamed, N.M. and Kait, C.F. (2021) Effect on Addition of Low Loading of Graphene Oxide to the Physical Characterization of Electrospun Polystyrene Fiber Mat. In: UNSPECIFIED.

Mohamed, N.M. and Shahid, M.U. and Ramly, K. and Singh, B.S.M. and Kait, C.F. and Zaine, S.N.A. and Ullah, F. (2021) Flexible Photoelectrode Based on Binder-Free Paste for Dye-Sensitized Solar Cell. In: UNSPECIFIED.

Mohamed, N.M. and Ullah, F. and Bashiri, R. and Kait, C.F. and Saheed, M.S.M. and Shahid, M.U. (2021) Hubbard�s Modified Density Functional Theory Calculations for the Electronic Structure and Optical Properties of Carbon Doped Anatase TiO2. In: UNSPECIFIED.

Abbasi, S. and Mohamed, N.M. and Singh, B.S.M. and Saheed, M.S.M. (2021) Ni-Doped TiO2 Nanotubes for Low Concentration H2 Sensing. In: UNSPECIFIED.

Abbasi, S. and Mohamed, N.M. and Singh, B.S.M. and Saheed, M.S.M. (2021) Ni-Doped TiO2 Nanotubes for Low Concentration H2 Sensing. In: UNSPECIFIED.

Yuharmon, N.A.S. and Mohamed, N.M. and Kait, C.F. and Cheong, K.Y. (2021) Performance of Organic Polymer Electrolyte Based on Extracted Aloe Vera Polysaccharide Compared with Mannose, Agarose and Carboxymethyl-Cellulose (CMC) for DSCs Application. In: UNSPECIFIED.

Soaid, N.I. and Mohamed Saheed, M.S. and Mohamed Saheed, M.S. and Mohamed, N.M. (2019) Effect of laser power on the formation of porous graphitic carbon on polyimide film. In: UNSPECIFIED.

Soaid, N.I. and Mohamed Saheed, M.S. and Mohamed Saheed, M.S. and Mohamed, N.M. (2019) Effect of laser power on the formation of porous graphitic carbon on polyimide film. In: UNSPECIFIED.

Vasudevan, M. and Murthe, S.S. and Yong, M.T.J. and Perumal, V. and Mohamed, N.M. and Gopinath, S.C.B. (2019) Facile Synthesis of Cellulose Acetate Nanofiber for Biosensing Application. In: UNSPECIFIED.

Vasudevan, M. and Murthe, S.S. and Yong, M.T.J. and Perumal, V. and Mohamed, N.M. and Gopinath, S.C.B. (2019) Facile Synthesis of Cellulose Acetate Nanofiber for Biosensing Application. In: UNSPECIFIED.

Tai, M.J.Y. and Vasudevan, M. and Perumal, V. and Liu, W.W. and Mohamed, N.M. (2019) Synthesis of Laser Scribed Graphene Electrode with Optimized Power for Biosensing. In: UNSPECIFIED.

Tai, M.J.Y. and Vasudevan, M. and Perumal, V. and Liu, W.W. and Mohamed, N.M. (2019) Synthesis of Laser Scribed Graphene Electrode with Optimized Power for Biosensing. In: UNSPECIFIED.

Yar, A. and Dennis, J.O. and Mohamed, N.M. and Mian, M.U. and Irshad, M.I. and Mumtaz, A. (2016) Copper oxide nanowires as better performance electrode material for supercapacitor application. In: UNSPECIFIED.

Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2016) Effect of electrode gap on the sensing properties of multiwalled carbon nanotubes based gas sensor. In: UNSPECIFIED.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. and Khatani, M. and Hanaei, H. (2016) Effect of preparation parameters on optical properties of Cu and Ni doped TiO2 photocatalyst. In: UNSPECIFIED.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Ullah, S. and Naz, M.Y. (2016) Effective CO2 adsorption on pristine and chemically functionalized MWCNTs. In: UNSPECIFIED.

Mumtaz, A. and Mohamed, N.M. and Saheed, M.S.M. and Yar, A. and Irshad, M.I. (2016) Enhanced photoelectrochemical activity by nanostructured V2O5/TiO2 bilayer. In: UNSPECIFIED.

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Saheed, M.S.M. (2016) Highly oriented graphene growth and characterization. In: UNSPECIFIED.

Joseph, E. and Singh, B.S.M. and Mohamed, N.M. and Kait, C.F. and Saheed, M.S.M. and Khatani, M. (2016) Investigating the performance of nitrogen-doped graphene photoanode in dye-sensitized solar cells. In: UNSPECIFIED.

Mohamed, N.M. and Bashiri, R. and Kait, C.F. and Sufian, S. and Khatani, M. (2016) Investigation of photoconversion efficiency of Cu and Ni doped TiO2 thin film in photoelectrochemical cell. In: UNSPECIFIED.

Zaine, S.N.A. and Mohamed, N.M. (2016) MATLAB simulation of Mie scattering by hollow sphere TiO2 for dye solar cell application. In: UNSPECIFIED.

Yasar, M. and Mohamed, N.M. and Hamid, N.H. and Shuaib, M. (2016) Pressure sensor based on pristine multi-walled carbon nanotubes forest. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Sufian, S. and Mohamed, N.M. (2015) Analysis of CNT additives in porous layered thin film lubrication with electric double layer. In: UNSPECIFIED.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. (2015) Effect of heat treatment on the physical properties of bimetallic doped catalyst, Cu-Ni/TiO 2. In: UNSPECIFIED.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. (2015) Effect of process temperature on morphology of CNTs grown in a vertically fluidized bed reactor with Fe 2 O 3 /Al 2 O 3 catalyst. In: UNSPECIFIED.

Sahmer, A.Z. and Mohamed, N.M. and Zaine, S.N.A. (2015) Effectiveness of dye sensitised solar cell under low light condition using wide band dye. In: UNSPECIFIED.

Irshad, M.I. and Ahmad, F. and Mohamed, N.M. and Abdullah, M.Z. and Yar, A. (2015) Microscopic and magnetic properties of template assisted electrodeposited iron nanowires. In: UNSPECIFIED.

Eskandar, A. and Mohamed, N.M. (2015) Microscopy of hierarchically organized TiO 2 photoelectrode for dye solar cells. In: UNSPECIFIED.

Mumtaz, A. and Mohamed, N.M. (2015) Nanoporous TiO 2 developed from two templates for their use in photovoltaic applications. In: UNSPECIFIED.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Yusoff, P.S.M.M. and Raza, M.R. and Afrooz, I.E. (2014) Experimental preparation and numerical simulation of high thermal conductive Cu/CNTs Nanocomposites. In: UNSPECIFIED.

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2014) Simulation of the effects of electrolyte concentration on Dye Solar Cell performance. In: UNSPECIFIED.

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2013) Effects of TiO2 electrode thickness on the performance of dye solar cell by simulation. In: UNSPECIFIED.

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2013) Effects of TiO2 electrode thickness on the performance of dye solar cell by simulation. In: UNSPECIFIED.

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2013) Effects of TiO2 electrode thickness on the performance of dye solar cell by simulation. In: UNSPECIFIED.

Lai , M.K. and Mohamed , N.M. and Kasim Rawthar, Mumtaj Begam (2009) Study on the Growth of carbon nanotubes with Different Fe precursor. In: International Conference on Nanoscience and Nanotechnology, Nano-SciTech 2008, 18 November 2008 through 21 November 2008, Selangor.

Book

Chowdhury, S. and Yasir, M. and Uemura, Y. and Mohamed, N.M. and Uddin, A. and Yanagida, T. (2015) Application of micro-or small-scale biomass-derived fuel system for power generation. Springer International Publishing, pp. 339-367.

Chowdhury, S. and Yasir, M. and Uemura, Y. and Mohamed, N.M. and Uddin, A. and Yanagida, T. (2014) Application of micro-or small-scale biomass-derived fuel system for power generation. Springer International Publishing, pp. 339-367.

Citation Index Journal

Kermany, A.R. and Mohamed, N.M. and Singh, B. (2011) Characterization of Aligned MWCNTs Array as the Sensing Element for Ionization Gas Sensor. [Citation Index Journal]

Mohd Zambri, Muhammad Shahazmi and Mohamed, N.M. and Chong, Fai Kait (2011) Preparation of Electrochromic Material Using Carbon Nanotubes (CNTs). [Citation Index Journal]

Mohamed, N.M. (2011) Sandwich Growth of Aligned Carbon Nanotubes Array Using CVD Method. [Citation Index Journal]

Mohamed, N.M. (2011) Synthesis & Characterization of Pure Anatase TiO2 Aggregates. [Citation Index Journal]