Items where Author is "Kurnia, J.C."

Article

Liaw, K.L. and Kurnia, J.C. and Putra, Z.A. and Aziz, M. and Sasmito, A.P. (2023) Enhanced turbulent convective heat transfer in helical twisted Multilobe tubes. International Journal of Heat and Mass Transfer, 202.

Liaw, K.L. and Ong, K.C. and Mohd Ali Zar, M.A.B. and Lai, W.K. and Muhammad, M.F.B. and Firmansyah and Kurnia, J.C. (2023) Experimental and numerical investigation of an innovative non-combustion impulse gas turbine for micro-scale electricity generation. Energy, 266.

Al-Kayiem, H.H. and Effendy, M. and Riyadi, T.W.B. and Kurnia, J.C. and Morganadus, A. (2023) Influence of Life Green Wall and Roof Shedding on the Internal Thermal Condition of Buildings: Case Study in Malaysia. Lecture Notes in Mechanical Engineering. pp. 35-45.

Haryoko, L.A.F. and Kurnia, J.C. and Abd Majid, M.A. (2023) Investigation of Heat Transfer Enhancement of a Planar Latent Heat Thermal Energy Storage. Lecture Notes in Mechanical Engineering. pp. 217-225.

Haryoko, L.A.F. and Sasmito, A.P. and Kurnia, J.C. (2023) Numerical Investigation of Laminar Convective Heat Transfer of Nanofluid in Parallel Cooling Channels. Lecture Notes in Mechanical Engineering. pp. 249-262.

Liaw, K.L. and Kurnia, J.C. and Lai, W.K. and Ong, K.C. and Zar, M.A.B.M.A. and Muhammad, M.F.B. and Firmansyah (2023) Optimization of a novel impulse gas turbine nozzle and blades design utilizing Taguchi method for micro-scale power generation. Energy, 282. ISSN 03605442

Riyandwita, B.W. and Kurnia, J.C. and Hastuty, S. and Barrinaya, M.A. (2023) Performance Evaluation of Thermal Energy Storage with Phase Change Material in Smooth and Expanded Pipe Flow Using Numerical Simulation. Lecture Notes in Mechanical Engineering. pp. 227-236.

Kurnia, J.C. and Chaedir, B. and Wijayanta, A.T. and Sasmito, A.P. (2022) Convective Heat Transfer Enhancement of Laminar Herschel�Bulkley Non-Newtonian Fluid in Straight and Helical Heat Exchangers with Twisted Tape Inserts. Industrial and Engineering Chemistry Research, 61 (1). pp. 814-844.

Kurnia, J.C. and Shatri, M.S. and Putra, Z.A. and Zaini, J. and Caesarendra, W. and Sasmito, A.P. (2022) Geothermal energy extraction using abandoned oil and gas wells: Techno-economic and policy review. International Journal of Energy Research, 46 (1). pp. 28-60.

Kurnia, J.C. and Shatri, M.S. and Putra, Z.A. and Zaini, J. and Caesarendra, W. and Sasmito, A.P. (2022) Geothermal energy extraction using abandoned oil and gas wells: Techno-economic and policy review. International Journal of Energy Research, 46 (1). pp. 28-60.

Soomro, A.A. and Mokhtar, A.A. and Kurnia, J.C. and Lashari, N. and Lu, H. and Sambo, C. (2022) Integrity assessment of corroded oil and gas pipelines using machine learning: A systematic review. Engineering Failure Analysis, 131.

Soomro, A.A. and Mokhtar, A.A. and Kurnia, J.C. and Lashari, N. and Lu, H. and Sambo, C. (2022) Integrity assessment of corroded oil and gas pipelines using machine learning: A systematic review. Engineering Failure Analysis, 131.

Kurnia, J.C. and Haryoko, L.A.F. and Taufiqurrahman, I. and Chen, L. and Jiang, L. and Sasmito, A.P. (2022) Optimization of an innovative hybrid thermal energy storage with phase change material (PCM) wall insulator utilizing Taguchi method. Journal of Energy Storage, 49.

Kurnia, J.C. and Haryoko, L.A.F. and Taufiqurrahman, I. and Chen, L. and Jiang, L. and Sasmito, A.P. (2022) Optimization of an innovative hybrid thermal energy storage with phase change material (PCM) wall insulator utilizing Taguchi method. Journal of Energy Storage, 49.

Agson-Gani, P.H. and Zueter, A.F. and Xu, M. and Ghoreishi-Madiseh, S.A. and Kurnia, J.C. and Sasmito, A.P. (2022) Thermal and hydraulic analysis of a novel double-pipe geothermal heat exchanger with a controlled fractured zone at the well bottom. Applied Energy, 310.

Soomro, A.A. and Mokhtar, A.A. and Kurnia, J.C. and Lashari, N. and Sarwar, U. and Jameel, S.M. and Inayat, M. and Oladosu, T.L. (2022) A review on Bayesian modeling approach to quantify failure risk assessment of oil and gas pipelines due to corrosion. International Journal of Pressure Vessels and Piping, 200.

Medhi, N.S. and Haryoko, L.A.F. and Kurnia, J.C. (2021) Numerical Investigation of Electronic Cooling with Phase Change Material. Lecture Notes in Mechanical Engineering, 46. pp. 451-461.

Kurnia, J.C. and Chaedir, B.A. and Sasmito, A.P. and Shamim, T. (2021) Progress on open cathode proton exchange membrane fuel cell: Performance, designs, challenges and future directions. Applied Energy, 283.

Liaw, K.L. and Kurnia, J.C. and Sasmito, A.P. (2021) Turbulent convective heat transfer in helical tube with twisted tape insert. International Journal of Heat and Mass Transfer, 169.

Kalantari, H. and Ghoreishi-Madiseh, S.A. and Kurnia, J.C. and Sasmito, A.P. (2021) An analytical correlation for conjugate heat transfer in fin and tube heat exchangers. International Journal of Thermal Sciences, 164.

Kurnia, J.C. and Ghoreishi-Madiseh, S.A. and Sasmito, A.P. (2020) Heat Transfer and Entropy Generation in Concentric/Eccentric Double-Pipe Helical Heat Exchangers. Heat Transfer Engineering, 41 (18). pp. 1552-1575.

Kurnia, J.C. and Ghoreishi-Madiseh, S.A. and Sasmito, A.P. (2020) Heat Transfer and Entropy Generation in Concentric/Eccentric Double-Pipe Helical Heat Exchangers. Heat Transfer Engineering, 41 (18). pp. 1552-1575.

Kurnia, J.C. and Chaedir, B.A. and Sasmito, A.P. (2020) Laminar convective heat transfer in helical tube with twisted tape insert. International Journal of Heat and Mass Transfer, 150.

Templeton, J.D. and Ghoreishi-Madiseh, S.A. and Hassani, F.P. and Sasmito, A.P. and Kurnia, J.C. (2020) Numerical and experimental study of transient conjugate heat transfer in helical closed-loop geothermal heat exchangers for application of thermal energy storage in backfilled mine stopes. International Journal of Energy Research, 44 (12). pp. 9609-9616.

Haryoko, L.A.F. and Kurnia, J.C. and Sasmito, A.P. (2020) Numerical investigation of subcooled boiling heat transfer in helically-coiled tube. International Journal of Automotive and Mechanical Engineering, 17 (1). pp. 7675-7686.

Kurnia, J.C. and Sasmito, A.P. (2020) Performance Evaluation of Liquid Mixing in a T-Junction Passive Micromixer with a Twisted Tape Insert. Industrial and Engineering Chemistry Research, 59 (9). pp. 3904-3915.

Nawi, N.I.M. and Bilad, M.R. and Anath, G. and Nordin, N.A.H. and Kurnia, J.C. and Wibisono, Y. and Arahman, N. (2020) The water flux dynamic in a hybrid forward osmosis-membrane distillation for produced water treatment. Membranes, 10 (9). pp. 1-13.

Kurnia, J.C. and Sasmito, A.P. and Shamim, T. (2019) Advances in proton exchange membrane fuel cell with dead-end anode operation: A review. Applied Energy, 252.

Inayat, M. and Sulaiman, S.A. and Kurnia, J.C. (2019) Catalytic co-gasification of coconut shells and oil palm fronds blends in the presence of cement, dolomite, and limestone: Parametric optimization via Box Behnken Design. Journal of the Energy Institute, 92 (4). pp. 871-882.

Inayat, M. and Sulaiman, S.A. and Kurnia, J.C. and Shahbaz, M. (2019) Effect of various blended fuels on syngas quality and performance in catalytic co-gasification: A review. Renewable and Sustainable Energy Reviews, 105. pp. 252-267.

Fong, M. and Alzoubi, M.A. and Kurnia, J.C. and Sasmito, A.P. (2019) On the performance of ground coupled seasonal thermal energy storage for heating and cooling: A Canadian context. Applied Energy, 250. pp. 593-604.

Fong, M. and Alzoubi, M.A. and Kurnia, J.C. and Sasmito, A.P. (2019) On the performance of ground coupled seasonal thermal energy storage for heating and cooling: A Canadian context. Applied Energy, 250. pp. 593-604.

Cheng, S.W.Y. and Kurnia, J.C. and Ghoreishi-Madiseh, S.A. and Sasmito, A.P. (2019) Optimization of geothermal energy extraction from abandoned oil well with a novel well bottom curvature design utilizing Taguchi method. Energy, 188.

Sasmito, A.P. and Kurnia, J.C. and Birgersson, E. and Mujumdar, A.S. (2017) Computational evaluation of thermal management strategies in an underground mine. Applied Thermal Engineering, 90.

Kurnia, J.C. and Sasmito, A.P. and Ping, S.I. (2017) Investigation of Heat Transfer on a Rotating Latent Heat Energy Storage. Energy Procedia, 105. pp. 4173-4178.

Akhtar, S. and Khan, M.N. and Kurnia, J.C. and Shamim, T. (2017) Investigation of energy conversion and flame stability in a curved micro-combustor for thermo-photovoltaic (TPV) applications. Applied Energy, 192. pp. 134-145.

Inayat, M. and Sulaiman, S.A. and Kurnia, J.C. (2017) Investigation on the effect of blending ratio and airflow rate on syngas profile produced from co-gasification of blended feedstock. MATEC Web of Conferences, 131.

Kurnia, J.C. and Sasmito, A.P. (2017) Numerical investigation of phase change materials thermal capacitor for pipe flow. MATEC Web of Conferences, 131.

Sasmito, A.P. and Kurnia, J.C. and Shamim, T. and Mujumdar, A.S. (2017) Optimization of an open-cathode polymer electrolyte fuel cells stack utilizing Taguchi method. Applied Energy, 185. pp. 1225-1232.

Kurnia, J.C. and Sasmito, A.P. and Xu, P. and Mujumdar, A.S. (2017) Performance and potential energy saving of thermal dryer with intermittent impinging jet. Applied Thermal Engineering, 113. pp. 246-258.

Kurnia, J.C. and Sasmito, A.P. and Shamim, T. (2017) Performance evaluation of a PEM fuel cell stack with variable inlet flows under simulated driving cycle conditions. Applied Energy, 206. pp. 751-764.

Yueze, L. and Akhtar, S. and Sasmito, A.P. and Kurnia, J.C. (2017) Prediction of air flow, methane, and coal dust dispersion in a room and pillar mining face. International Journal of Mining Science and Technology, 27 (4). pp. 657-662.

Kurnia, J.C. and Sasmito, A.P. (2016) Heat transfer performance of non-circular coiled tubes - research summary, challenges and directions. International Journal of Automotive and Mechanical Engineering, 13 (3). pp. 3710-3727.

Kurnia, J.C. and Sasmito, A.P. and Shamim, T. and Mujumdar, A.S. (2016) Numerical investigation of heat transfer and entropy generation of laminar flow in helical tubes with various cross sections. Applied Thermal Engineering, 102. pp. 849-860.

Kurnia, J.C. and Sasmito, A.P. and Mujumdar, A.S. (2016) Thermal Performance of Coiled Square Tubes at Large Temperature Differences for Heat Exchanger Application. Heat Transfer Engineering, 37 (16). pp. 1341-1356.

Kurnia, J.C. and Sasmito, A.P. and Mujumdar, A.S. (2016) Thermal Performance of Coiled Square Tubes at Large Temperature Differences for Heat Exchanger Application. Heat Transfer Engineering, 37 (16). pp. 1341-1356.

Sasmito, A.P. and Kurnia, J.C. and Birgersson, E. and Mujumdar, A.S. (2015) Computational evaluation of thermal management strategies in an underground mine. Applied Thermal Engineering, 90. pp. 1144-1150.

Kurnia, J.C. and Sasmito, A.P. and Hassani, F.P. and Mujumdar, A.S. (2015) Introduction and evaluation of a novel hybrid brattice for improved dust control in underground mining faces: A computational study. International Journal of Mining Science and Technology, 25 (4). pp. 537-543.

Akhtar, S. and Kurnia, J.C. and Shamim, T. (2015) A three-dimensional computational model of H2-air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application. Applied Energy, 152. pp. 47-57.

Akhtar, S. and Kurnia, J.C. and Shamim, T. (2015) A three-dimensional computational model of H2-air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application. Applied Energy, 152. pp. 47-57.

Conference or Workshop Item

Ting, S.Y.Y. and Liaw, K.L. and Kurnia, J.C. (2022) Investigation on the Effect of Nanoparticle Diameter and Concentration on the Performance of Nanofluid Solar Pond. In: UNSPECIFIED.

Ting, S.Y.Y. and Liaw, K.L. and Kurnia, J.C. (2022) Investigation on the Effect of Nanoparticle Diameter and Concentration on the Performance of Nanofluid Solar Pond. In: UNSPECIFIED.

Liaw, K.L. and Kurnia, J.C. (2022) Numerical Investigation of Boiling Flow in Oval Tube with Different Ellipticity. In: UNSPECIFIED.

Liaw, K.L. and Kurnia, J.C. (2022) Numerical Investigation of Boiling Flow in Oval Tube with Different Ellipticity. In: UNSPECIFIED.

Chin, A.R. and Kurnia, J.C. and Sasmito, A.P. (2022) Pore-Scale Modelling in Metal Foam Heat Exchanger. In: UNSPECIFIED.

Chin, A.R. and Kurnia, J.C. and Sasmito, A.P. (2022) Pore-Scale Modelling in Metal Foam Heat Exchanger. In: UNSPECIFIED.

Dwinanda, R.P. and Haryoko, L.A.F. and Kurnia, J.C. (2020) The effect of epoxy and non-epoxy coating treatment on the corrosion of low carbon steel in sodium chloride solutions. In: UNSPECIFIED.

Dwinanda, R.P. and Haryoko, L.A.F. and Kurnia, J.C. (2020) The effect of epoxy and non-epoxy coating treatment on the corrosion of low carbon steel in sodium chloride solutions. In: UNSPECIFIED.

Book

Kurnia, J.C. and Sasmito, A.P. (2019) Hydrogen fuel cell in vehicle propulsion: Performance, efficiency, and challenge. Springer Singapore, pp. 9-26.

Kurnia, J.C. and Sasmito, A.P. (2019) Hydrogen fuel cell in vehicle propulsion: Performance, efficiency, and challenge. Springer Singapore, pp. 9-26.

Kurnia, J.C. and Sasmito, A.P. (2019) Hydrogen fuel cell in vehicle propulsion: Performance, efficiency, and challenge. Springer Singapore, pp. 9-26.