Items where Author is "Khan, M.I."

Article

Al-Masoodi, A.H.H. and Abbas, Y.M. and Alkhatib, F. and Khan, M.I. and Shafiq, N. and ElGawady, M. (2023) Aerodynamic optimization for corner modification of octagonal-shape tall buildings using computational approach. Journal of Building Engineering, 76. ISSN 23527102

Khan, M.I. and Sutanto, M.H. and Khahro, S.H. and Zoorob, S.E. and Md. Yusoff, N.I. and Al-Sabaeei, A.M. and Javed, Y. (2023) Fatigue Prediction Model and Stiffness Modulus for Semi-Flexible Pavement Surfacing Using Irradiated Waste Polyethylene Terephthalate-Based Cement Grouts. Coatings, 13 (1). ISSN 20796412

Memon, A.M. and Sutanto, M.H. and Yusoff, N.I.M. and Memon, R.A. and Khan, M.I. and Al-Sabaeei, A.M. (2023) Rheological modeling and microstructural evaluation of oily sludge modified bitumen. Case Studies in Construction Materials, 18. ISSN 22145095

Ali, M. and Khan, M.I. and Masood, F. and Alsulami, B.T. and Bouallegue, B. and Nawaz, R. and Fediuk, R. (2022) Central composite design application in the optimization of the effect of waste foundry sand on concrete properties using RSM. Structures, 46. pp. 1581-1594.

Aslam, F. and Elkotb, M.A. and Iqtidar, A. and Khan, M.A. and Javed, M.F. and Usanova, K.I. and Khan, M.I. and Alamri, S. and Musarat, M.A. (2022) Compressive strength prediction of rice husk ash using multiphysics genetic expression programming. Ain Shams Engineering Journal, 13 (3).

Aslam, F. and Elkotb, M.A. and Iqtidar, A. and Khan, M.A. and Javed, M.F. and Usanova, K.I. and Khan, M.I. and Alamri, S. and Musarat, M.A. (2022) Compressive strength prediction of rice husk ash using multiphysics genetic expression programming. Ain Shams Engineering Journal, 13 (3).

Khan, M.I. and Sutanto, M.H. and Khan, K. and Iqbal, M. and Napiah, M.B. and Zoorob, S.E. and Klemeš, J.J. and Bokhari, A. and Rafiq, W. (2022) Effective use of recycled waste PET in cementitious grouts for developing sustainable semi-flexible pavement surfacing using artificial neural network (ANN). Journal of Cleaner Production, 340.

Ali, M. and Abbas, S. and de Azevedo, A.R.G. and Marvila, M.T. and Alqurashi, M. and Khan, M.I. and Rafiq, W. and Hussein, E.E. (2022) Experimental and analytical investigation on the confinement behavior of low strength concrete under axial compression. Structures, 36. pp. 303-313.

Masood, M.A. and Wu, Y. and Chen, Y. and Yuan, H. and Sher, N. and Faiz, F. and Yao, S. and Qi, F. and Khan, M.I. and Ahmed, M. and Mushtaq, N. and He, W. and Guo, Z. (2022) Optimizing the photodynamic therapeutic effect of BODIPY-based photosensitizers against cancer and bacterial cells. Dyes and Pigments, 202.

Babashamsi, P. and Khahro, S.H. and Omar, H.A. and Al-Sabaeei, A.M. and Memon, A.M. and Milad, A. and Khan, M.I. and Sutanto, M.H. and Yusoff, N.I.M. (2022) Perspective of Life-Cycle Cost Analysis and Risk Assessment for Airport Pavement in Delaying Preventive Maintenance. Sustainability (Switzerland), 14 (5).

Khan, K. and Jalal, F.E. and Iqbal, M. and Khan, M.I. and Amin, M.N. and Al-Faiad, M.A. (2022) Predictive Modeling of Compression Strength of Waste PET/SCM Blended Cementitious Grout Using Gene Expression Programming. Materials, 15 (9).

Khan, M.I. and Sutanto, M.H. and Napiah, M.B. and Khan, K. and Rafiq, W. (2021) Design optimization and statistical modeling of cementitious grout containing irradiated plastic waste and silica fume using response surface methodology. Construction and Building Materials, 271.

Khan, M.I. and Wen, L.S. and Sutanto, M.H. and Napiah, M.B. and Zoorob, S.E. (2021) Effect of cement grouts containing irradiated polyethylene terephthalate on properties of semi-flexible mixtures. Key Engineering Materials, 888 KE. pp. 3-8.

de Azevedo, A.R.G. and Marvila, M.T. and Ali, M. and Khan, M.I. and Masood, F. and Vieira, C.M.F. (2021) Effect of the addition and processing of glass polishing waste on the durability of geopolymeric mortars. Case Studies in Construction Materials, 15.

Rafiq, W. and Napiah, M. and Habib, N.Z. and Sutanto, M.H. and Alaloul, W.S. and Khan, M.I. and Musarat, M.A. and Memon, A.M. (2021) Modeling and design optimization of reclaimed asphalt pavement containing crude palm oil using response surface methodology. Construction and Building Materials, 291.

Ullah, H. and Qureshi, K.S. and Khan, U. and Zaffar, M. and Yang, Y.J. and Rabat, N.E. and Khan, M.I. and Saqib, S. and Mukhtar, A. and Ullah, S. and Mubashir, M. and Bokhari, A. and Chai, W.S. and Chew, K.W. and Show, P.L. (2021) Self-healing epoxy coating synthesis by embedment of metal 2-methyl imidazole and acetylacetonate complexes with microcapsules. Chemosphere, 285.

Ali, M. and Room, S. and Khan, M.I. and Masood, F. and Ali Memon, R. and Khan, R. and Memon, A.M. (2020) Assessment of local earthen bricks in perspective of physical and mechanical properties using Geographical Information System in Peshawar, Pakistan. Structures, 28. pp. 2549-2561.

Rafiq, W. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zabri, Z.N.B. and Khan, M.I. and Musarat, M.A. (2020) Investigation on hamburg wheel-tracking device stripping performance properties of recycled hot-mix asphalt mixtures. Materials, 13 (21). pp. 1-15.

Khan, M.I. and Sutanto, M.H. and Napiah, M.B. and Zoorob, S.E. and Yusoff, N.I.M. and Usman, A. and Memon, A.M. (2020) Irradiated polyethylene terephthalate and fly ash based grouts for semi-flexible pavement: design and optimisation using response surface methodology. International Journal of Pavement Engineering.

Memon, A.M. and Hartadi Sutanto, M. and Napiah, M. and Khan, M.I. and Rafiq, W. (2020) Modeling and optimization of mixing conditions for petroleum sludge modified bitumen using response surface methodology. Construction and Building Materials, 264.

Shamim, M.Y. and Buang, A. and Anjum, H. and Khan, M.I. and Athar, M. (2019) Development and quantitative evaluation of leading and lagging metrics of emergency planning and response element for sustainable process safety performance. Journal of Loss Prevention in the Process Industries, 62.

Khan, M.I. and Huat, H.Y. and bin Muhamad Dun, M.H. and Sutanto, M.H. and Jarghouyeh, E.N. and Zoorob, S.E. (2019) Effect of irradiated and non-irradiated waste PET based cementitious grouts on flexural strength of semi-flexible pavement. Materials, 12 (24).

Khan, M.I. and Khattak, M.I. and Witjaksono, G. and Barki, Z.U. and Ullah, S. and Khan, I. and Lee, B.M. (2019) Experimental investigation of a planar antenna with band rejection features for ultra-wide band (UWB) wireless networks. International Journal of Antennas and Propagation, 2019.

Ullah, H. and Azizli, K.A.M. and Man, Z.B. and Ismail, M.B.C. and Rehman, S.U. and Khan, M.I. (2018) Efficient Entrapment of Oxirane Ring Containing Compounds in Thermally Stable Poly(urea-formaldehyde) Polymer Shell Wall. Polymer Science - Series B, 60 (1). pp. 20-34.

Ullah, H. and Azizli, K.A.M. and Man, Z.B. and Ismail, M.B.C. and Rehman, S.U. and Khan, M.I. (2018) Efficient Entrapment of Oxirane Ring Containing Compounds in Thermally Stable Poly(urea-formaldehyde) Polymer Shell Wall. Polymer Science - Series B, 60 (1). pp. 20-34.

Quraishi, K.S. and Bustam, M.A. and Krishnan, S. and Khan, M.I. and Wilfred, C.D. and Lévêque, J.-M. (2017) Thermokinetics of alkyl methylpyrrolidinium NTf2 ionic liquids: Effect of alkyl chain on thermal stability. Journal of Thermal Analysis and Calorimetry, 129 (1). pp. 261-270.

Khan, A.S. and Man, Z. and Bustam, M.A. and Kait, C.F. and Khan, M.I. and Muhammad, N. and Nasrullah, A. and Ullah, Z. and Ahmad, P. (2016) Impact of Ball-Milling Pretreatment on Pyrolysis Behavior and Kinetics of Crystalline Cellulose. Waste and Biomass Valorization, 7 (3). pp. 571-581.

Ullah, H. and Azizli, K.A.M. and Man, Z.B. and Che Ismail, M.B. and Khan, M.I. (2016) The potential of microencapsulated self-healing materials for microcracks recovery in self-healing composite systems: A review. Polymer Reviews, 56 (3). pp. 429-485.

Muhammad, N. and Gao, Y. and Khan, M.I. and Khan, Z. and Rahim, A. and Iqbal, F. and khan , A.S. and Iqbal, J. (2015) Effect of ionic liquid on thermo-physical properties of bamboo biomass. Wood Science and Technology, 49 (5). pp. 897-913.

Muhammad, N. and Gao, Y. and Khan, M.I. and Khan, Z. and Rahim, A. and Iqbal, F. and khan , A.S. and Iqbal, J. (2015) Effect of ionic liquid on thermo-physical properties of bamboo biomass. Wood Science and Technology, 49 (5). pp. 897-913.

Conference or Workshop Item

Al-Sabaeei, A.M. and Napiah, M. and Al Salaheen, M. and Badri, R.M. and Noura, S. and Khan, M.I. and Al-Bahr, T.M. and Alzubi, K. (2022) Optimizing the Physical Properties of Waste Denim Fiber-Modified Rubberized Bitumen Through Response Surface Methodology. In: UNSPECIFIED.

Ali, M. and Masood, F. and Khan, M.I. and Azeem, M. and Qasim, M. and Ali, F.N. (2021) Evaluation of flexible pavement distresses-A Case Study of Northern Bypass Peshawar, Pakistan. In: UNSPECIFIED.

Heng, K.K. and Khan, M.I. and Sutanto, M.H. and Zoorob, S.E. and Sunarjono, S. (2021) Investigating Mechanical Properties of Interlocking Concrete Blocks by Recycling Waste Polyethylene Terephthalate-A Sustainable Approach. In: UNSPECIFIED.

Ali, M. and Abbas, S. and Khan, M.I. and Anwar Gad, M. and Ammad, S. and Khan, A. (2020) Experimental Validation of Mander's Model for Low Strength Confined Concrete under Axial Compression. In: UNSPECIFIED.

Ali, M. and Abbas, S. and Khan, M.I. and Anwar Gad, M. and Ammad, S. and Khan, A. (2020) Experimental Validation of Mander's Model for Low Strength Confined Concrete under Axial Compression. In: UNSPECIFIED.

Khan, M.I. and Azizli, K. and Sufian, S. and Man, Z. and Siyal, A.A. and Ullah, H. (2015) Determination of anisotropy and multimorphology in fly ash based geopolymers. In: UNSPECIFIED.

Siyal, A.A. and Azizli, K.A. and Ismail, L. and Man, Z. and Khan, M.I. (2015) Quantification of geopolymers production by chemical methods- A short review. In: UNSPECIFIED.