Items where Author is "Karuppanan, S."

Group by: Item Type | No Grouping

Number of items: 73.

Remesh, S. and Loganathan, N.N. and Perumal, V. and Ovinis, M. and Karuppanan, S. and Edison, T.N.J.I. and Raja, P.B. and Ibrahim, M.N.M. and Arumugam, N. and Kumar, R.S. (2024) A high performance selectively grown nano-octahedral Mn3O4 on lignin derived laser scribed graphene for microsupercapacitor applications. Journal of Energy Storage, 77.

Devi Vijaya Kumar, S. and Karuppanan, S. and Ovinis, M. (2023) Application of Artificial Neural Network for Failure Pressure Prediction of Pipeline with Circumferential Groove Corrosion Defect. Lecture Notes in Mechanical Engineering. pp. 939-954.

Vasudevan, M. and Remesh, S. and Perumal, V. and Raja, P.B. and Ibrahim, M.N.M. and Gopinath, S.C.B. and Karuppanan, S. and Ovinis, M. (2023) Facile synthesis of MoS2 nanoflower-Ag NPs grown on lignin-derived graphene for Troponin I aptasensing. Chemical Engineering Journal, 468. ISSN 13858947

Vasudevan, M. and Remesh, S. and Perumal, V. and Raja, P.B. and Ibrahim, M.N.M. and Gopinath, S.C.B. and Lee, H.-L. and Karuppanan, S. and Ovinis, M. and Arumugam, N. and Kumar, R.S. (2023) Lignin derived nanoparticle intercalation on nitrogen-doped graphene quantum dots for electrochemical sensing of cardiac biomarker. Microchemical Journal, 195. ISSN 0026265X

Arumugam, T. and Karuppanan, S. and Ovinis, M. (2023) Numerical Failure Analysis of Corroded Pipeline Elbow with Longitudinally Aligned Interacting Corrosion Defects. Lecture Notes in Mechanical Engineering. pp. 899-917.

Remesh, S. and Vasudevan, M. and Perumal, V. and Ovinis, M. and Karuppanan, S. and Edison, T.N.J.I. and Raja, P.B. and Ibrahim, M.N.M. and Voon, C.H. and Arumugam, N. and Kumar, R.S. (2023) Oil palm lignin-derived laser scribed graphene in neutral electrolyte for high-performance microsupercapacitor application. Journal of Environmental Chemical Engineering, 11 (5). ISSN 22133437

Perumal, P. and Karuppanan, S. and Ovinis, M. (2023) Residual Strength Prediction of a Pipeline with Interacting Corrosion Defects Subjected to Combined Loading Using Artificial Neural Networks. Lecture Notes in Mechanical Engineering. pp. 705-719.

Vasudevan, M. and Perumal, V. and Raja, P.B. and Ibrahim, M.N.M. and Lee, H.-L. and Gopinath, S.C.B. and Ovinis, M. and Karuppanan, S. and Ang, P.C. and Arumugam, N. and Kumar, R.S. (2023) A quadruplet 3-D laser scribed graphene/MoS2 functionalised N2-doped graphene quantum dots and lignin-based Ag-nanoparticles for biosensing. International Journal of Biological Macromolecules, 253. ISSN 01418130

Lo, M. and Karuppanan, S. and Ovinis, M. (2022) ANN-and FEA-Based Assessment Equation for a Corroded Pipeline with a Single Corrosion Defect. Journal of Marine Science and Engineering, 10 (4).

Patil, S.S. and Karuppanan, S. (2022) Analysis of frictional stress variations along tooth contact of spur and helical gears. CRC Press, pp. 115-143. ISBN 9781000778427; 9781032152349

Lo, M. and Vijaya Kumar, S.D. and Karuppanan, S. and Ovinis, M. (2022) An Artificial Neural Network-Based Equation for Predicting the Remaining Strength of Mid-to-High Strength Pipelines with a Single Corrosion Defect. Applied Sciences (Switzerland), 12 (3).

Sajid, Z. and Karuppanan, S. and Kee, K.E. and Sallih, N. and Shah, S.Z.H. (2022) Bearing performance improvement of single-lap, single-bolt basalt composite joints by locally strengthening the joint location using carbon fibre. Thin-Walled Structures, 180.

Aslam Shaikh, A. and Anil Pradhan, A. and Mahesh Kotasthane, A. and Patil, S. and Karuppanan, S. (2022) Comparative analysis of Basalt/E-Glass/S2-Fibreglass-Carbon fiber reinforced epoxy laminates using finite element method. Materials Today: Proceedings.

Vasudevan, M. and Perumal, V. and Karuppanan, S. and Ovinis, M. and Bothi Raja, P. and Gopinath, S.C.B. and Immanuel Edison, T.N.J. (2022) A Comprehensive Review on Biopolymer Mediated Nanomaterial Composites and Their Applications in Electrochemical Sensors. Critical Reviews in Analytical Chemistry.

Kumar, S.D.V. and Lo, M. and Karuppanan, S. and Ovinis, M. (2022) Failure Pressure Prediction of Medium to High Toughness Pipe with Circumferential Interacting Corrosion Defects Subjected to Combined Loadings Using Artificial Neural Network. Applied Sciences (Switzerland), 12 (9).

Pradhan, A.A. and Kotasthane, A.M. and Shaikh, A.A. and Patil, S. and Karuppanan, S. (2022) Finite Element Analysis of Mechanical Properties of Basalt-Carbon Epoxy Hybrid Laminates. Mechanics of Advanced Composite Structures, 9 (2). pp. 263-274.

Sadeq, S. and Ovinis, M. and Karuppanan, S. (2022) Modeling and Simulation of PMSG Wind Energy Conversion System Using Active Disturbance Rejection Control. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 92 (1). pp. 105-122.

Afrathim, A. and Karuppanan, S. and Patil, S.S. (2021) Burst strength analysis of thin composite pressure vessels. In: UNSPECIFIED.

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ud Din, I. and Othman, A.R. and Sharp, K. and Gerard, P. (2021) Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites. Composites Part B: Engineering, 207.

Lo, M. and Karuppanan, S. and Ovinis, M. (2021) Failure pressure prediction of a corroded pipeline with longitudinally interacting corrosion defects subjected to combined loadings using fem and ann. Journal of Marine Science and Engineering, 9 (3).

Chin, K.T. and Arumugam, T. and Karuppanan, S. and Ovinis, M. (2021) Failure pressure prediction of pipeline with single corrosion defect using artificial neural network. Science and Technologies: Oil and Oil Products Pipeline Transportation, 11 (2). pp. 166-171.

Gu, H. and Guo, Z. and Naik, N. and Shetty, D.K. and Hameed, B.M.Z. and Chakraborty, U.K. and Paul, R. and Vanahalli, M.K. and Srivastava, D.K. and Gupta, A. and Singla, B. and Kumar, S. and Aaydee, N. and Liu, C. and Hao, Q. and Zhang, H. and Patil, S. and John, B. and Karuppanan, S. and Sun, L. and Le, T.Q. and Gurunathan, B. and Muthukumaran, C. and Sham Aan, M.P. and Lu, N. and Zhou, H.N. and Manoharan, A.N. and Maddodi, B. (2021) Frontiers of Advanced Sciences and Technologies: Results, Challenges and Perspectives. Engineered Science, 16. pp. 1-4.

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ahmad, F. and Sajid, Z. (2021) Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites. Applied Composite Materials.

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Sajid, Z. (2021) Multiscale damage modelling of 3D woven composites under static and impact loads. Composites Part A: Applied Science and Manufacturing, 151.

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ahmad, F. and Sajid, Z. and Gerard, P. and Sharp, K. (2021) Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading. International Journal of Mechanical Sciences, 189.

Sajid, Z. and Karuppanan, S. and Sallih, N. and Kee, K.E. and Shah, S.Z.H. (2021) Role of washer size in mitigating adverse effects of bolt-hole clearance in a single-lap, single-bolt basalt composite joint. Composite Structures, 266.

Arumugam, T. and Mohamad Rosli, M.K.A. and Karuppanan, S. and Ovinis, M. and Lo, M. (2020) Burst capacity analysis of pipeline with multiple longitudinally aligned interacting corrosion defects subjected to internal pressure and axial compressive stress. SN Applied Sciences, 2 (7).

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Ovinis, M. and Sultan, M.T.H. (2020) Experimental characterization of compression performance of carbonâ��basalt hybrid filament wound pipes before and after impact. Composites: Mechanics, Computations, Applications, 11 (1). pp. 25-38.

Arumugam, T. and Karuppanan, S. and Ovinis, M. (2020) Finite element analyses of corroded pipeline with single defect subjected to internal pressure and axial compressive stress. Marine Structures, 72.

Sajid, Z. and Karuppanan, S. and Shah, S.Z.H. (2020) Open-hole and filled-hole failure envelopes of bfrp and gfrp: A comparative study. Lecture Notes in Mechanical Engineering. pp. 391-398.

Aslam, M.Z. and Jeoti, V. and Karuppanan, S. and Pandian, M.S. and Ferrer, E.M. and Suresh, K. (2020) Surface acoustic wave modes characteristics of CMOS compatible SiO2/AlN/SiO2/Si multilayer structure with embedded electrodes. Sensors and Actuators, A: Physical, 313.

Maper, A. and Karuppanan, S. and Patil, S.S. (2019) Analysis and formulation of spur gear stresses with different tip modifications ä¸�å��é½¿å°�ä¿®æ£ç��ç�´é½¿è½®åº�å��å��æ��ä¸�è®¡ç®�. Journal of Central South University, 26 (9). pp. 2368-2378.

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Ovinis, M. (2019) Effects of carbon fiber hybridization on the compressive strength of glass-carbon/epoxy hybrid composite pipes before and after low velocity impact. Key Engineering Materials, 796. pp. 30-37.

Shah, S.Z.H. and Karuppanan, S. and Megat-Yusoff, P.S.M. and Sajid, Z. (2019) Impact resistance and damage tolerance of fiber reinforced composites: A review. Composite Structures, 217. pp. 100-121.

Maper, A. and Karuppanan, S. and Patil, S.S. (2019) Numerical analysis of low-velocity impact of carbon-basalt/epoxy hybrid laminates. Indian Journal of Engineering and Materials Sciences, 26 (5-6). pp. 349-355.

Aslam, M.Z. and Jeoti, V. and Karuppanan, S. and Chand, A. (2019) PZT based multilayer surface acoustic wave device for high frequency applications. In: UNSPECIFIED.

Arumugam, T. and Karuppanan, S. and Ovinis, M. (2019) Residual strength analysis of pipeline with circumferential groove corrosion subjected to internal pressure. In: UNSPECIFIED.

Patil, S.S. and Karuppanan, S. and Atanasovska, I. (2019) A short review on frictional contact stress distribution in involute gears. Tribology in Industry, 41 (2). pp. 254-266.

Aslam, M.Z. and Jeoti, V. and Karuppanan, S. and Malik, A.F. and Iqbal, A. (2018) FEM analysis of sezawa mode SAW sensor for VOC based on CMOS compatible AlN/SiO2/Si multilayer structure. Sensors (Switzerland), 18 (6).

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Baharom, M.A. (2017) Burst pressure investigation of filament wound type IV composite pressure vessel. AIP Conference Proceedings, 1901.

Afrooz, I.E. and Sinnathambi, C.M. and Chuang, D.L. and Karuppanan, S. (2017) CFD simulation of bubbling fluidized bed: Effects of bed column geometry on hydrodynamics of gas–solid mixing: Numerische Strömungssimulation einer blasenbildenden Wirbelschicht: Einfluss der Reaktorgeometrie auf die hydrodynamischen Eigenschaften einer Gas-Feststoff Mischung. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 226-234.

Dhuban, S.B. and Karuppanan, S. and Mengal, A.N. and Patil, S.S. (2017) Effect of fiber orientation and ply stacking sequence on buckling behaviour of basalt-carbon hybrid composite laminates. Indian Journal of Engineering and Materials Sciences, 24 (3). pp. 187-193.

Shariffudin, K.A. and Karuppanan, S. and Patil, S.S. (2017) Finite element analysis of residual stress in cold expanded plate with different thickness and expansion ratio. IOP Conference Series: Materials Science and Engineering, 257 (1).

Mengal, A.N. and Karuppanan, S. and Ovinis, M. (2017) In–plane shear properties of basalt–carbon/epoxy hybrid composite laminates: In–plane Schereigenschaften von Basalt-Kohlenstoff/Epoxy-Hybrid-Verbundlaminaten. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 261-266.

Belachew, C.T. and Che Ismail, M. and Karuppanan, S. (2017) Strength Assessment of Corroded Pipelines - Finite Element Simulations and Parametric Studies. International Journal of Structural Stability and Dynamics, 17 (7).

Kuppusamy, C.S. and Karuppanan, S. and Patil, S.S. (2016) Buckling Strength of Corroded Pipelines with Interacting Corrosion Defects: Numerical Analysis. International Journal of Structural Stability and Dynamics, 16 (9).

Afrooz, I.E. and Sinnathambi, C.M. and Karuppanan, S. and Ching, D.L.C. (2016) CFD simulation of bubbling fluidized bed: Effect of distributor plate orifice pattern configuration on hydrodynamics of gas-solid mixing. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11954-11959.

Mengal, A.N. and Karuppanan, S. and Farhood, N.H. (2016) Compressive behaviour of basalt FRP and basalt-carbon hybrid frp laminates. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11994-11998.

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Mengal, A.N. (2016) Effect of low velocity impact on deformation behavior of metallic pressure vessel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13319-13324.

Patil, S.S. and Karuppanan, S. and Atanasovska, I. (2016) Experimental measurement of strain and stress state at the contacting helical gear pairs. Measurement: Journal of the International Measurement Confederation, 82. pp. 313-322.

Karuppanan, S. and Patil, S.S. (2016) Finite element analysis of stress variation along the depth of gear tooth. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12228-12233.

Belachew, C.T. and Mokhtar, C.I. and Karuppanan, S. (2016) Strength assessment of a corroded pipeline through the burst test: Case study. Journal of Pipeline Systems Engineering and Practice, 7 (3). 04016003.

Khoo, S.-W. and Karuppanan, S. and Tan, C.-S. (2016) A review of surface deformation and strain measurement using two-dimensional digital image correlation. Metrology and Measurement Systems, 23 (3). pp. 461-480.

Patil, S.S. and Karuppanan, S. and Atanasovska, I. (2015) Contact stress evaluation of involute gear pairs, including the effects of friction and helix angle. Journal of Tribology, 137 (4).

Irawan, S. and Bharadwaj, A.M. and Temesgen, B. and Karuppanan, S. and Abdullah, M.Z.B. (2015) Effect of wear on the burst strength of l-80 steel casing. In: UNSPECIFIED.

Mengal, A.N. and Karuppanan, S. and Wahab, A.A. (2014) Basalt carbon hybrid composite for wind turbine rotor blades: A short review. Advanced Materials Research, 970. pp. 67-73.

Patil, S. and Karuppanan, S. and Atanasovska, I. and Wahab, A.A. and Lias, M.R. (2014) Contact stress analysis for gears of different helix angle using finite element method. In: UNSPECIFIED.

Karuppanan, S. and Abdul Wahab, A. and Patil, S. and Zahari, M.A. (2014) Estimation of burst pressure of corroded pipeline using finite element analysis (FEA). Advanced Materials Research, 879. pp. 191-198.

Ashri, M. and Karuppanan, S. and Patil, S. and Ibrahim, I. (2014) Modal analysis of a centrifugal pump impeller using finite element method. In: UNSPECIFIED.

Mengal, A.N. and Karuppanan, S. and Wahab, A.A. (2014) Structural analysis of basalt fiber reinforced plastic wind turbine blade. In: UNSPECIFIED.

Patil, S. and Karuppanan, S. and Abdul Wahab, A. (2013) Contact pressure evaluation of a gear pair along the line of action using finite element analysis. Applied Mechanics and Materials, 393. pp. 403-408.

Hilmee, M.I. and Chandra, M.S. and Karuppanan, S. and Fadhil, H.A.M. and Lias, M.R. (2013) Effects of different granular viscosity models on the bubbling fluidized bed - A numerical approach. Applied Mechanics and Materials, 393. pp. 857-862.

Ahmad Azmy, A. and Karuppanan, S. and Abdul Wahab, A. (2013) Failure pressure estimation of corroded pipeline with different depths of interacting defects subjected to internal pressure. Applied Mechanics and Materials, 393. pp. 1005-1010.

This list was generated on Mon Nov 25 12:17:31 2024 +08.