Items where Author is "Irawan, S."

Sauki, A. and Megat Khamaruddin, P.N.F. and Irawan, S. and Kinif, I. and Ridha, S. and Aziz, R.A. and Wan Bakar, W.Z. (2023) Prophecy of Cutting Transport Ratio through a Relationship between Equivalent Circulating Density and Drilled Solid Concentration. Key Engineering Materials, 939. pp. 83-91.

Sauki, A. and Khamaruddin, P.N.F.M. and Irawan, S. and Kinif, I. and Ridha, S. (2022) Application of Multiple Regression Technique for Predicting Drilling Rate in Loss Zone. In: UNSPECIFIED.

Khan, J.A. and Irawan, S. and Dan, I.B.M. and Cai, B. (2022) Determining the difference of kick tolerance with single bubble and dynamic multiphase models: Evaluation of well-control with water/synthetic based muds. Ain Shams Engineering Journal, 13 (4).

Khan, J.A. and Irawan, S. and Dan, I.B.M. and Cai, B. (2022) Determining the difference of kick tolerance with single bubble and dynamic multiphase models: Evaluation of well-control with water/synthetic based muds. Ain Shams Engineering Journal, 13 (4).

Arain, A.H. and Ridha, S. and Suppiah, R.R. and Irawan, S. and Ilyas, S.U. (2022) Developing an efficient ester-based drilling fluid based on Calophyllum Inophyllum oil for eco-friendly drilling of unconventional shale formation. Journal of Petroleum Science and Engineering, 219.

Khan, M.K.A. and Khan, J.A. and Ullah, H. and Al-Kayiem, H.H. and Irawan, S. and Irfan, M. and Glowacz, A. and Liu, H. and Glowacz, W. and Rahman, S. (2021) De-emulsification and gravity separation of micro-emulsion produced with enhanced oil recovery chemicals flooding. Energies, 14 (8).

Shafian, S.R.M. and Saaid, I.M. and Razali, N. and Salleh, I.K. and Irawan, S. (2021) Experimental investigation of colloidal silica nanoparticles (C-SNPs) for fines migration control application. Applied Nanoscience (Switzerland), 11 (7). pp. 1993-2008.

Khan, J.A. and Irawan, S. and Seela Thurai, A. and Cai, B. (2021) Quantitative analysis of blowout preventer flat time for well control operation: Value added data aimed at performance enhancement. Engineering Failure Analysis, 120.

Abbas, G. and Irawan, S. and Memon, K.R. and Khan, J. (2020) Application of cellulose-based polymers in oil well cementing. Journal of Petroleum Exploration and Production Technology, 10 (2). pp. 319-325.

Khan, J.A. and Irfan, M. and Irawan, S. and Yao, F.K. and Shokor Abdul Rahaman, Md. and Shahari, A.R. and Glowacz, A. and Zeb, N. (2020) Comparison of machine learning classifiers for accurate prediction of real-time stuck pipe incidents. Energies, 13 (14).

Arain, A.H. and Irawan, S. and Ibrahim, A. and Rajeswary, R. (2020) Experimental investigation of capillary threshold pressure in shale. International Journal of Advanced Science and Technology, 29 (1). pp. 129-140.

Irawan, S. and Shanmugam, A.K. and Hidayat, M.I.P. and Biyanto, T.R. (2019) Study of lateral vibration of drilling string with mass imbalance using finite element. International Journal on Advanced Science, Engineering and Information Technology, 9 (3). pp. 816-821.

Tiong, M. and Gholami, R. and Rahman, M.E. and Irawan, S. (2019) An approach to enhance the durability and mechanical properties of Class G cement using nano materials. In: UNSPECIFIED.

Tiong, M. and Gholami, R. and Rahman, M.E. and Irawan, S. (2019) An approach to enhance the durability and mechanical properties of Class G cement using nano materials. In: UNSPECIFIED.

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. and Irawan, S. (2018) A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials. International Journal of Computational Methods, 15 (2).

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. and Irawan, S. (2018) A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials. International Journal of Computational Methods, 15 (2).

Bataee, M. and Irawan, S. (2018) Porosity and permeability alteration around wellbore during injection process. International Journal of Geomechanics, 18 (2).

Chai, Y.H. and Yusup, S. and Chok, V.S. and Irawan, S. and Singh, J.D.B.S. and Chin, B.L.F. (2017) Comparison of rheological properties of graphene / carbon nanotube hydrogenated oil based biodegradable drilling fluid. IOP Conference Series: Materials Science and Engineering, 206 (1).

Bataee, M. and Irawan, S. and Namazi-saleh, F. and Ridha, S. (2017) Development of stress model near the wellbore using an iterative coupling method. International Journal of Geomechanics, 17 (2).

Hidayat, M.I.P. and Irawan, S. and Abdullah, M.Z. (2017) Effect of casing imperfection on the casing strength in steam injection wells. IOP Conference Series: Materials Science and Engineering, 267 (1).

Irawan, S. and Permatasari, K.A. and Bayuaji, R. (2017) Effect of density and resistivity measurement for foam flooding propagation in static condition. IOP Conference Series: Materials Science and Engineering, 267 (1).

Bataee, M. and Hamdi, Z. and Irawan, S. and Ashena, R. and Ghassemi, M.F. (2017) Effect of saturation alteration on wellbore stability during WAG Injection. Society of Petroleum Engineers - SPE Russian Petroleum Technology Conference 2017.

Jufar, S.R. and Djuraev, U. and Irawan, S. and Lubis, L.A. (2017) Influence of Saturant on Seismoelectric Coupling Response of Porous Media. IOP Conference Series: Earth and Environmental Science, 88 (1).

Irawan, S. and Kinif, B.I. and Bayuaji, R. (2017) Maximizing drilling performance through enhanced solid control system. IOP Conference Series: Materials Science and Engineering, 267 (1).

Subekti, S. and Bayuaji, R. and Darmawan, M.S. and Husin, N.A. and Wibowo, B. and Anugraha, B. and Irawan, S. and DIbiantara, D. (2017) Review: Potential strength of fly ash-based geopolymer paste with substitution of local waste materials with higherature effect. IOP Conference Series: Materials Science and Engineering, 267 (1).

Chai, Y.H. and Yusup, S. and Chok, V.S. and Irawan, S. and Singh, J.S.D.B. (2017) Thermophysical properties of graphene nanosheets – Hydrogenated oil based nanofluid for drilling fluid improvements. Applied Thermal Engineering, 122. pp. 794-805.

Bataee, M. and Irawan, S. and Ridha, S. and Hematpour, H. and Hamdi, Z. (2017) Wellbore failure during water-alternating-gas injection by use of flow-stress coupling method. SPE Journal, 22 (1). pp. 172-183.

Affandhie, B.A. and Kurniasari, P.T. and Darmawan, M.S. and Subekti, S. and Wibowo, B. and Husin, N.A. and Bayuaji, R. and Irawan, S. (2017) The effects of bottom ash on setting time and compressive strength of fly ash geopolymer paste. IOP Conference Series: Materials Science and Engineering, 267 (1).

Hidayat, M.I.P. and Irawan, S. and Abdullah, M.Z. (2016) Casing strength degradation in thermal environment of steam injection wells. In: UNSPECIFIED.

Biyanto, T.R. and Kusuma, F. and Musyafa, A. and Noriyati, R.D. and Bayuaji, R. and da Costa, S. and Irawan, S. (2016) Correction factor determination on failure rate equation of MacLaurin series for low and high mode application. Ain Shams Engineering Journal, 7 (2). pp. 827-834.

Kinif, I. and Irawan, S. and Bharadwaj, A.M. (2016) Development and evaluation of solid control system to optimize drilling performance. Jurnal Teknologi, 78 (6-7). pp. 101-107.

Bataee, M. and Irawan, S. and Ridha, S. and Hematpour, H. and Hamdi, Z. (2016) Effects of injection pressure on wellbore stress using flow-stress coupling method. In: UNSPECIFIED.

Chai, Y.H. and Yusup, S. and Chok, V.S. and Arpin, M.T. and Irawan, S. (2016) Investigation of thermal conductivity of multi walled carbon nanotube dispersed in hydrogenated oil based drilling fluids. Applied Thermal Engineering, 107. pp. 1019-1025.

Chai, Y.H. and Yusup, S. and Chok, V.S. and Arpin, M.T. and Irawan, S. (2016) Investigation of thermal conductivity of multi walled carbon nanotube dispersed in hydrogenated oil based drilling fluids. Applied Thermal Engineering, 107. pp. 1019-1025.

Bataee, M. and Irawan, S. and Ridha, S. (2016) Wellbore stability model based on iterative coupling method in water alternating gas injection. Journal of Petroleum Exploration and Production Technology, 6 (4). pp. 755-775.

Ofei, T.N. and Irawan, S. and Pao, W. (2015) Cuttings-liquid frictional pressure loss model for horizontal narrow annular flow with rotating drillpipe. In: UNSPECIFIED.

Bayuaji, R. and Biyanto, T.R. and Irawan, S. (2015) Design of cement plant waste heat recovery generation. In: UNSPECIFIED.

Irawan, S. and Bharadwaj, A.M. and Temesgen, B. and Karuppanan, S. and Abdullah, M.Z.B. (2015) Effect of wear on the burst strength of l-80 steel casing. In: UNSPECIFIED.

Irawan, S. and Bharadwaj, A.M. and Temesgen, B. and Karuppanan, S. and Abdullah, M.Z.B. (2015) Effect of wear on the burst strength of l-80 steel casing. In: UNSPECIFIED.

Biyanto, T.R. and Natawiria, A.D.S. and Kusuma, F. and Musyafa, A. and Noriyati, R.D. and Costa, S.D. and Irawan, S. (2015) The effects of test interval on safety instrumented function (SIF) according to Safety Integrity Level (SIL) value on three phase separator application. In: UNSPECIFIED.

Bazargan, M. and Nakhaee, A. and Koohian, A. and Irawan, S. and Habibpour, M. and Shahvar, M. (2014) Comparison of wellbore stability of UBD in the case of laser drilling and conventional operation. In: UNSPECIFIED.

Tunio, S.Q. and Bhattacharya, S.K. and Memon, K.R. and Irawan, S. and Kyaw, A. and Abdullah, M.F. (2014) Investigating methane adsorption potential of Malaysian coal for coal bed methane (CBM) study. Mediterranean Journal of Social Sciences, 5 (27). pp. 178-183.

Abbas, G. and Irawan, S. and Kumar, S. and Khan, M.N. and Memon, S. (2013) Gas migration prevention using hydroxypropylmethylcellulose as a multifunctional additive in oil well cement slurry. In: UNSPECIFIED.

Abbas, G. and Irawan, S. and Memon, K.R. and Kumar, S. and Elrayah, A.A.I. (2013) Hydroxypropylmethyl cellulose as a primary viscosifying agent in cement slurry at high temperature. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1218-1225.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.