Logo

Items where Author is "Awang, M."

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 78.

Article

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2021) Influence of in situ postweld heat treatment on microstructure and failure behavior of dual-phase steel resistance spot weld. International Journal of Advanced Manufacturing Technology, 114 (11-12). pp. 3739-3750.

Meyghani, B. and Awang, M. and Emamian, S.S. (2021) Introducing an enhanced friction model for developing inertia welding simulation: A computational solid mechanics approach. International Journal of Engineering Transactions C: Aspects, 34 (3). pp. 737-743.

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2021) Optimization of postweld tempering pulse parameters for maximum load bearing and failure energy absorption in dual phase (DP590) steel resistance spot welds. Materials Science and Engineering A, 803 .

Bin Meor Razali, A.M.M.F. and Awang, M. and Emamian, S.S. (2021) Preface. Lecture Notes in Civil Engineering, 139 LN .

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2021) Stability Analysis of Partial Slip Texture Journal Bearing. Lecture Notes in Mechanical Engineering . pp. 217-225.

Chitturi, V. and Pedapati, S.R. and Awang, M. (2020) Challenges in dissimilar friction stir welding of aluminum 5052 and 304 stainless steel alloys Herausforderungen beim artfremden Reibrührschwei�en von Aluminiumlegierungen 5052 und 304 rostfreiem Stahl. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 811-816.

Meyghani, B. and Awang, M. (2020) Developing a Finite Element Model for Thermal Analysis of Friction Stir Welding (FSW) Using Hyperworks. Lecture Notes in Mechanical Engineering . pp. 619-628.

Paramaguru, D. and Pedapati, S.R. and Awang, M. and Mohebbi, H. and Sharma, K.V. (2020) Effect of process parameters on mechanical properties of AA5052 joints using underwater friction stir welding. Journal of Mechanical Engineering and Sciences, 14 (1). pp. 6259-6271.

Meyghani, B. and Emamian, S. and Awang, M. and Wu, C.S. (2020) Finite element modeling of nano porous sintered silver material. Lecture Notes in Mechanical Engineering . pp. 55-67.

Ismail, A. and Awang, M. and Zuhir, M.S.M. and Rahman, F.A. and Baharudin, B.A. and Puteri Zarina, M.K. and Hamid, D.A. and Rojan, M.A. and Dahalan, W.M. (2020) Friction Stir Welding on AA5083 Tee Joint in 1F Position. Lecture Notes in Mechanical Engineering . pp. 351-360.

Ismail, A. and Awang, M. and Zuhir, M.S.M. and Rahman, F.A. and Baharudin, B.A. and Puteri Zarina, M.K. and Hamid, D.A. and Rojan, M.A. and Dahalan, W.M. (2020) Friction Stir Welding on AA5083 Tee Joint in 1F Position. Lecture Notes in Mechanical Engineering . pp. 351-360.

Emamian, S.S. and Awang, M. and Yusof, F. and Sheikholeslam, M. and Mehrpouya, M. (2020) Improving the friction stir welding tool life for joining the metal matrix composites. International Journal of Advanced Manufacturing Technology, 106 (7-8). pp. 3217-3227.

Yamin, M.F. and Awang, M. and Suhuddin, U.F.H. and Sallih, N. and Klusemann, B. and dos Santos, J.F. (2020) Mechanical performance optimization of similar thin AA 7075-T6 sheets produced by refill friction stir spot welding Optimierung der mechanischen Leistungfähigkeit für artgleich produzierte AA 7075-T6-Bleche durch Rühr-Reib-Punkt-Schwei�en. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 830-835.

Awang, M. and Fared, M.R.M.M. (2020) Preface. Lecture Notes in Civil Engineering, 59 . v.

Rao, T.V.V.L.N. and A Rani, A.M. and Mohamed, N.M. and Ya, H.H. and Awang, M. and M Hashim, F. (2020) Static and stability analysis of partial slip texture multi-lobe journal bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234 (4). pp. 567-587.

Meyghani, B. and Awang, M. and Wu, C.S. and Emamian, S. (2020) Temperature distribution investigation during friction stir welding (fsw) using smoothed-particle hydrodynamics (sph). Lecture Notes in Mechanical Engineering . pp. 749-761.

Meyghani, B. and Awang, M. and Wu, C.S. and Emamian, S. (2020) Temperature distribution investigation during friction stir welding (fsw) using smoothed-particle hydrodynamics (sph). Lecture Notes in Mechanical Engineering . pp. 749-761.

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2019) Analysis of magnetohydrodynamic partial slip laser bump texture slider and journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 233 (12). pp. 1921-1938.

Emamian, S. and Awang, M. and Yusof, F. and Hussain, P. and Meyghani, B. and Zafar, A. (2019) The Effect of Pin Profiles and Process Parameters on Temperature and Tensile Strength in Friction Stir Welding of AL6061 Alloy. Lecture Notes in Mechanical Engineering . pp. 15-37.

Emamian, S. and Awang, M. and Yusof, F. and Hussain, P. and Meyghani, B. and Zafar, A. (2019) The Effect of Pin Profiles and Process Parameters on Temperature and Tensile Strength in Friction Stir Welding of AL6061 Alloy. Lecture Notes in Mechanical Engineering . pp. 15-37.

Emamian, S. and Awang, M. and Yusof, F. and Hussain, P. and Meyghani, B. and Zafar, A. (2019) The Effect of Pin Profiles and Process Parameters on Temperature and Tensile Strength in Friction Stir Welding of AL6061 Alloy. Lecture Notes in Mechanical Engineering . pp. 15-37.

Meyghani, B. and Awang, M. and Bokam, P. and Plank, B. and Heinzl, C. and Siow, K.S. (2019) Finite element modeling of nano porous sintered silver material using computed tomography images Finite-Elemente-Modellierung von nano-porösem gesinterten Silber unter Verwendung von Computertomographiebildern. Materialwissenschaft und Werkstofftechnik, 50 (5). pp. 533-538.

Paramaguru, D. and Pedapati, S.R. and Awang, M. (2019) A Review on Underwater Friction Stir Welding (UFSW). Lecture Notes in Mechanical Engineering . pp. 71-83.

Paramaguru, D. and Pedapati, S.R. and Awang, M. (2019) A Review on Underwater Friction Stir Welding (UFSW). Lecture Notes in Mechanical Engineering . pp. 71-83.

Paramaguru, D. and Pedapati, S.R. and Awang, M. (2019) A Review on Underwater Friction Stir Welding (UFSW). Lecture Notes in Mechanical Engineering . pp. 71-83.

Meyghani, B. and Awang, M. and Emamian, S. and Plank, B. and Christoph, H. and Siow, K.S. (2019) Stress analysis of nano porous material using computed tomography images Spannungsanalyse von nanoporösem Material mittels Computertomographie-Aufnahmen. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 234-239.

Meyghani, B. and Awang, M. and Emamian, S. and Mohd Nor, M.K.B. (2019) Thermal Modelling of Friction Stir Welding (FSW) Using Calculated Young�s Modulus Values. Lecture Notes in Mechanical Engineering . pp. 1-13.

Meyghani, B. and Awang, M. and Emamian, S. and Mohd Nor, M.K.B. (2019) Thermal Modelling of Friction Stir Welding (FSW) Using Calculated Young�s Modulus Values. Lecture Notes in Mechanical Engineering . pp. 1-13.

Meyghani, B. and Awang, M. and Emamian, S. and Mohd Nor, M.K.B. (2019) Thermal Modelling of Friction Stir Welding (FSW) Using Calculated Young�s Modulus Values. Lecture Notes in Mechanical Engineering . pp. 1-13.

Ayob, F. and Hussain, P. and Awang, M. and Zoolfakar, M.R. and Abdullah, A. and Baharudin, B.A. and Abdul Rahim, A.A. (2018) Effect of post heat treatment on the microstructure and microhardness of diffusion coupled gray cast iron and low carbon steel. IOP Conference Series: Materials Science and Engineering, 328 (1).

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. (2018) Evaluation of the hardness distribution and fracture location in friction stir welded AA6063 pipe butt joints. Advanced Structured Materials, 85 . pp. 439-444.

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. (2018) Evaluation of the hardness distribution and fracture location in friction stir welded AA6063 pipe butt joints. Advanced Structured Materials, 85 . pp. 439-444.

Hanamertani, A.S. and Pilus, R.M. and Manan, N.A. and Ahmed, S. and Awang, M. (2018) Ionic Liquid Application in Surfactant Foam Stabilization for Gas Mobility Control. Energy and Fuels, 32 (6). pp. 6545-6556.

Hanamertani, A.S. and Pilus, R.M. and Manan, N.A. and Ahmed, S. and Awang, M. (2018) Ionic Liquid Application in Surfactant Foam Stabilization for Gas Mobility Control. Energy and Fuels, 32 (6). pp. 6545-6556.

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. and Ahmad, K. (2018) The mapping of full weld cycle heat profile for friction stir welding pipe butt joints. Advanced Structured Materials, 85 . pp. 461-467.

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. and Ahmad, K. (2018) The mapping of full weld cycle heat profile for friction stir welding pipe butt joints. Advanced Structured Materials, 85 . pp. 461-467.

Emamian, S. and Hussain, P. and Awang, M. and Arumugam, T. and Yusof, F. and Saheed, M.S.M. and Mohamed, N.M. (2017) Comparison of carbon-based nanomaterials characteristics on H13 tool steel: Vergleich der Eigenschaften Kohlenstoff-basierter Nanomaterialien auf H13 Werkzeugstahl. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 198-204.

Meyghani, B. and Awang, M. and Emamian, S. and Khalid, N.M. (2017) Developing a finite element model for thermal analysis of friction stir welding by calculating temperature dependent friction coefficient. Lecture Notes in Mechanical Engineering . pp. 107-126.

Pedapati, S.R. and Sidiq, A.B. and Awang, M. and Hashim, F.M. and Jebaraj, S. (2017) Effect of bevel angles on tensile strength of SS304 steel weld joints. Lecture Notes in Mechanical Engineering . pp. 95-106.

Zafar, A. and Awang, M. and Khan, S.R. (2017) Friction stir welding of polymers: An overview. Lecture Notes in Mechanical Engineering . pp. 19-36.

Pedapati, S.R. and Paramaguru, D. and Awang, M. (2017) Microhardness and microstructural studies on underwater Friction Stir Welding of 5052 Aluminum Alloy. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2 .

Hussein, S.A. and Tahir, A.S.M. and Awang, M. (2017) On amorphous phase formation in dissimilar friction stir welding of aluminum to steel. Lecture Notes in Mechanical Engineering . pp. 69-81.

Lias, M.R. and Sharif, Z. and Awang, M. and Jailani, A. and Warap, H. (2017) Quasi-static modeling of spur gear time varying strength analysis. ARPN Journal of Engineering and Applied Sciences, 12 (6). pp. 1938-1947.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2017) Stability evaluation of three-layered journal bearing with slip/partial slip. Industrial Lubrication and Tribology, 69 (3). pp. 334-341.

Meyghani, B. and Awang, M. and Emamian, S. (2017) A mathematical formulation for calculating temperature dependent friction coefficient values: Application in friction stir welding (FSW). Defect and Diffusion Forum, 379 . pp. 73-82.

Emamian, S. and Awang, M. and Yusof, F. and Hussain, P. and Mehrpouya, M. and Kakooei, S. and Moayedfar, M. and Zafar, A. (2017) A review of friction stir welding pin profile. Lecture Notes in Mechanical Engineering . pp. 1-18.

Soleimani, H. and Yahya, N. and Baig, M.K. and Khodapanah, L. and Sabet, M. and Bhat, A.H. and �chsner, A. and Awang, M. (2016) Catalytic effect of zinc oxide nanoparticles on oil-water interfacial tension. Digest Journal of Nanomaterials and Biostructures, 11 (1). pp. 263-269.

Soleimani, H. and Yahya, N. and Baig, M.K. and Khodapanah, L. and Sabet, M. and Bhat, A.H. and �chsner, A. and Awang, M. (2016) Catalytic effect of zinc oxide nanoparticles on oil-water interfacial tension. Digest Journal of Nanomaterials and Biostructures, 11 (1). pp. 263-269.

Ahmad, I. and Awang, M. and Sufian, S. and Irfan Khan, M. and Mumtazb, M. (2016) Effect of ball milling of fly ash particle size on foam stabilization for EOR applications. Jurnal Teknologi, 78 (6-7). pp. 115-119.

Hamdi, Z. and Awang, M. (2016) Effect of low temperature CO2 injection in high temperature oil reservoirs using slimtube experiment. Jurnal Teknologi, 78 (6-6). pp. 35-39.

Ibrahim, N.-N.M.D. and Awang, M. and Hussain, P. (2016) Effect of thickness on residual stress in joining sialon to AISI 420. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4191-4196.

Srinivasa Rao, P. and Bawazir, A.F.O. and Awang, M. and Rani, A.M.A. and Jebaraj, S. (2016) Effect of tool geometrical parameters on friction stir welding joint properties of aluminum alloy AA6061. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13053-13058.

Srinivasa Rao, P. and Bawazir, A.F.O. and Awang, M. and Rani, A.M.A. and Jebaraj, S. (2016) Effect of tool geometrical parameters on friction stir welding joint properties of aluminum alloy AA6061. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13053-13058.

Emamian, S. and Awang, M. and Hussai, P. and Meyghani, B. and Zafar, A. (2016) Influences of tool pin profile on the friction stir welding of AA6061. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12258-12261.

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Investigating friction stir welding on thick nylon 6 plates. Welding Journal, 95 (6). 210s-218s.

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Investigating friction stir welding on thick nylon 6 plates. Welding Journal, 95 (6). 210s-218s.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2016) Load capacity coefficient evaluation of three-layered journal bearing with slip. Jurnal Teknologi, 78 (6-10). pp. 39-43.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2016) Load capacity coefficient evaluation of three-layered journal bearing with slip. Jurnal Teknologi, 78 (6-10). pp. 39-43.

Noor, N.F.M. and Awang, M. (2016) Overview of underwater friction stir welding. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14319-14321.

Noor, N.F.M. and Awang, M. (2016) Overview of underwater friction stir welding. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14319-14321.

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Role of pin profile on material flow during friction stir welding of nylon-6. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13309-13312.

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Role of pin profile on material flow during friction stir welding of nylon-6. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13309-13312.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Nagarajan, T. and Hashim, F.M. (2016) Stability analysis of double porous and surface porous layer journal bearing. Tribology - Materials, Surfaces and Interfaces, 10 (1). pp. 19-25.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Nagarajan, T. and Hashim, F.M. (2016) Stability analysis of double porous and surface porous layer journal bearing. Tribology - Materials, Surfaces and Interfaces, 10 (1). pp. 19-25.

Ismail, A. and Awang, M. and Hamid, D.A. and Ab Rahman, F. and Khalid, P.Z.M. (2016) Temperature profile and fracture location of friction stir welded AA6063-T6 pipe butt joint. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13305-13308.

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Visual analysis of material flow during friction stir welding of nylon-6. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4186-4190.

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Visual analysis of material flow during friction stir welding of nylon-6. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4186-4190.

Ismail, A. and Awang, M. and Rojan, M.A. and Samsudin, S.H. (2016) The characteristic of temperature curves for friction stir welding of aluminium alloy 6063-T6 pipe during tool plunging stage. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 277-280.

Meyghani, B. and Awang, M. and Emamian, S. (2016) A comparative study of finite element analysis for friction stir welding application. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12984-12989.

Meyghani, B. and Awang, M. and Emamian, S. (2016) A comparative study of finite element analysis for friction stir welding application. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12984-12989.

Awang, M. and Raza, S.K. and Yahaya, M.S.A. (2015) Microstructure and hardness investigation of different welding passes in weld zones. Materialwissenschaft und Werkstofftechnik, 46 (4-5). pp. 492-497.

Conference or Workshop Item

Chitturi, V. and Pedapati, S.R. and Awang, M. (2020) Effect of process parameters on friction stir lap welded 304 stainless steel and 5052 aluminium alloys. In: UNSPECIFIED.

["eprint_typename_conference\_item" not defined]

Chitturi, V. and Pedapati, S.R. and Awang, M. (2020) Effect of process parameters on friction stir lap welded 304 stainless steel and 5052 aluminium alloys. [["eprint_typename_conference\_item" not defined]]

Meyghani, B. and Awang, M. and Wu, C.S. (2020) Probabilistic finite element analysis of the deflection on a beam. [["eprint_typename_conference\_item" not defined]]

Ismail, A. and Awang, M. and Rahman, F.A. and Megat Khalid, P.Z. and Baharudin, B.A. and Rojan, M.A. and Hamid, D.A. (2019) The Effects of Welding Parameters on Macro and Micro-Structure of Friction Stir Welded Aluminium. [["eprint_typename_conference\_item" not defined]]

Ismail, A. and Awang, M. and Rahman, F.A. and Megat Khalid, P.Z. and Baharudin, B.A. and Rojan, M.A. and Hamid, D.A. (2019) The Effects of Welding Parameters on Macro and Micro-Structure of Friction Stir Welded Aluminium. [["eprint_typename_conference\_item" not defined]]

Chitturi, V. and Rao Pedapati, S. and Awang, M. (2019) A Review on Process Parameters and their effects on Dissimilar Friction Stir Welding of Aluminium and Steel Alloys. [["eprint_typename_conference\_item" not defined]]

Chitturi, V. and Rao Pedapati, S. and Awang, M. (2019) A Review on Process Parameters and their effects on Dissimilar Friction Stir Welding of Aluminium and Steel Alloys. [["eprint_typename_conference\_item" not defined]]

This list was generated on Tue Nov 30 10:33:02 2021 MYT.