Items where Author is "Ariwahjoedi, B."

Article

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. and Irawan, S. (2018) A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials. International Journal of Computational Methods, 15 (2).

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. and Irawan, S. (2018) A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials. International Journal of Computational Methods, 15 (2).

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. and Rao, T.V.V.L.N. (2017) Meshless Local B-Spline Collocation Method for Two-Dimensional Heat Conduction Problems With Nonhomogenous and Time-Dependent Heat Sources. Journal of Heat Transfer, 139 (7).

Lubis, A.M.H.S. and Ariwahjoedi, B. and Sudin, M. (2017) XPS characterization of tribo-layer formation on the steel lubricated with crude and epoxidized jatropha oil under boundary lubrication. Industrial Lubrication and Tribology, 69 (3). pp. 371-377.

Jaal, R.A. and Ismail, M.C. and Ariwahjoedi, B. (2016) Determination of critical micelle concentration (CMC) of corrosion inhibitor via electrochemical measurement. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13431-13434.

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Alkali, A.U. and Danish, M. (2016) Effect of cutting speed and feed rate on surface roughness of AISI 316l SS using end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2496-2500.

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Alkali, A.U. and Danish, M. (2016) Effect of cutting speed and feed rate on surface roughness of AISI 316l SS using end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2496-2500.

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Danish, M. and Alkali, A.U. (2016) Evaluation of chips formation of AISI 316L SS using precision end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12903-12907.

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Danish, M. and Alkali, A.U. (2016) Evaluation of chips formation of AISI 316L SS using precision end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12903-12907.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Shaari, K.Z.K. (2015) Effect of pre-coat solution temperature on fluidized bed urea coatings. Surface Engineering, 31 (7). pp. 486-491.

Naz, M.Y. and Sulaiman, S.A. and Man, Z. and Ariwahjoedi, B. (2015) Effect of the water spray stress on swirling fluidized bed height. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10192-10195.

Naz, M.Y. and Sulaiman, S.A. and Man, Z. and Ariwahjoedi, B. (2015) Effect of the water spray stress on swirling fluidized bed height. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10192-10195.

Lubis, A.M.H.S. and Ariwahjoedi, B. and Sudin, M.B. (2015) Investigation on oxidation and thermal stability of jatropha oil. Jurnal Teknologi, 77 (21). pp. 79-83.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Zilati, K. (2015) Visual characterization of heated water spray jet breakup induced by full cone spray nozzles. Journal of Applied Mechanics and Technical Physics, 56 (2). pp. 211-219.

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. (2015) A new meshless local B-spline basis functions-FD method for two-dimensional heat conduction problems. International Journal of Numerical Methods for Heat and Fluid Flow, 25 (2). pp. 225-251.

Almustapha, S. and Ali Khan, A.A. and Omar, A.A. and Ariwahjoedi, B. and Abdullah, M.A. (2014) Cellulose-modified carbon electrode for in situ lead detection. Applied Mechanics and Materials, 625. pp. 136-139.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Shaari, K.Z.K. (2014) Characterization of modified tapioca starch solutions and their sprays for high temperature coating applications. The Scientific World Journal, 2014.

Konda, R.E. and Sulaiman, S.A. and Ariwahjoedi, B. (2014) Design and Development of Laboratory Scale Updraft Gasifier for Gasification of Oil Palm Fronds. Asian Journal of Scientific Research, 7 (3). pp. 341-353.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2014) Study of primary atomisation phenomenon of modified starch solution stream at elevated temperature. Materials Research Innovations, 18. S6-135-S6-139.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2014) Visual Characterization of Airless Water Spray Jet Breakup and Vortex Clouds Formation at Elevated Temperature and Pressure. Arabian Journal for Science and Engineering, 39 (10). pp. 7241-7250.

Ridha, Syahrir and Irawan, Sonny and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology. ISSN 2190-0558

Naz, Muhammad Yasin and Sulaiman, S. A. and Ariwahjoedi, B. (2013) Experimental Study of Airless Spray Jet Breakup at Elevated Temperature and Pressure. Applied Mechanics and Materials, 393. pp. 711-716. ISSN 1660-9336

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2013) Experimental study of airless spray jet breakup at elevated temperature and pressure. Applied Mechanics and Materials, 393. pp. 711-716.

Elneel, R. and Sulaiman, S. A. and Ariwahjoedi, B. (2013) Prediction of Heating Values of Oil Palm Fronds from Ultimate Analysis. Journal of Applied Sciences, 13 (3). pp. 491-196. ISSN 1812-5654

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311.

Syah Lubis, A.M.H. and Ariwahjoedi, B. and Sudin, M. and Parman, S. (2013) Thermo oxidative degradation behavior of jatropha curcass L. oil in the presence of antioxidant. Applied Mechanics and Materials, 393. pp. 893-898.

Mamat, O. and Ahmed, T. and Ariwahjoedi, B. (2011) Characterization and Properties of Copper-Silica Sand Nanoparticles Composites. Deffect and Diffusion Forum, 319-320. pp. 95-105.

Abdul Mutalib, M I and Ariwahjoedi, B. and Murugesan, T and Kurnia, Kiki (2011) Density and excess molar volume of the protic ionic liquid bis(2-hydroxyethyl)ammonium acetate with alcohols. J Solution Chem, 40 (3). pp. 470-480. ISSN 00959782

Ugheoke, BI and Mamat, O. and Ariwahjoedi, B. (2010) A Brief Survey of the Literature on Silica Refractory Research and Development: The Case for Nanostructured Silica Obtained from Rice Husk Ash (RHA). Diffusion and Defect Data. Pt A Defect and Diffusion Forum, 307. pp. 53-62. ISSN 10120386

Conference or Workshop Item

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2015) Sauter mean diameter statistics of the starch dispersion atomized with hydraulic nozzle. In: UNSPECIFIED.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2015) Spatio-temporal droplet size statistics in developing spray of starchy solution. In: UNSPECIFIED.

Jaal, R.A. and Ismail, M.C. and Ariwahjoedi, B. (2014) A review of CO2 corrosion inhibition by imidazoline-based inhibitor. In: UNSPECIFIED.

Permana, Kusniar Deny and Shuib, Anis and Ariwahjoedi, B. (2013) A Review of Magnesium Alloys for use in Biodegradable Cardiovascular Stents. In: international conference on “Innovation Challenges in Multidisciplinary Research & Practice (ICMRP 2013), 13-14 December 2013, Kuala Lumpur. (Submitted)

Riza, R and Ariwahjoedi, B. and Sulaiman, S. A. (2012) Solar Variation in the Zero-Dimensional Climates Model: A Numerical Experiment. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Konda, R.E. and Sulaiman, S. A. and Ariwahjoedi, B. (2012) Syngas production from Gasification of Oil Palm Fronds with an Updraft Gasifier. In: 3rd International Conference on Production, Energy and Reliability, 12-14 June 2012, Kuala Lumpur.

Elneel, R. and Sulaiman, S. A. and Ariwahjoedi, B. (2011) Feasibility Study of Gasification Oil Palm Fronds in an Updraft Gasifier. In: The 4th International Meeting of Advances in Thermofluids, Melaka.

Riza, R and Ariwahjoedi, B. and Sulaiman, S. A. (2011) Preliminary Study of the Zero-Dimensional Climate Modeling by Using Numerical Method. In: 3rd National Postgraduate Conference, Tronoh.

Abdul Rani, A. M. and Sulaiman, S. A. and Ariwahjoedi, B. (2008) Using Optical Light Microscopy and Scanning Electron Microscopy to Analyse and Quantify Flexible Polyurethane Foam Cell Size. In: 17th Scientific Conference organized by Electron Microscopy Society of Malaysia, December 2008, Shah Alam.

Citation Index Journal

Naz, Muhammad Yasin and Sulaiman, S. A. and Ariwahjoedi, B. and Ku Shaari, Ku Zilati (2013) Investigation of Vortex Clouds and Droplet Sizes in Heated Water Spray Patterns Generated by Axi-Symmetric Full Cone Nozzles. [Citation Index Journal]

Riza, R and Ariwahjoedi, B. and Sulaiman, S. A. (2013) Solar Radiation Simulation by Using Zero-dimensional Climate Model. [Citation Index Journal]

Konda, R. E. and Sulaiman, S. A. and Ariwahjoedi, B. (2012) Syngas Production from Gasification of Oil Palm Fronds with an Updraft Gasifier. [Citation Index Journal]

Riza, R and Ariwahjoedi, B. and Sulaiman, S. A. (2011) On the Numerical Exploration of Zero-Dimensional Greenhouse Model using Newton-Raphson and Steepest Descent Methods. [Citation Index Journal]

Kiki, Adi Kurnia and Abdul Mutalib, M I and Ariwahjoedi, B. and T., Murugesan (2011) Physicochemical Properties of Binary Mixtures of the Protic Ionic Liquid Bis(2-hydroxyethyl)methylammonium Formate with Methanol, Ethanol, and 1-Propanol. [Citation Index Journal]

Kurnia, Kiki and Ariwahjoedi, B. and M I A, Ibrahim and T, Murugesan (2011) Density and Excess Molar Volume of the Protic Ionic Liquid Bis(2-hydroxyethyl)ammonium Acetate with Alcohols. [Citation Index Journal]

Kiki, Adi Kurnia and Ariwahjoedi, B. and Abdul Mutalib, M I and T., Murugesan (2011) Density and excess molar volume of the protic ionic liquid bis(2-hydroxyethyl)ammonium acetate with alcohols. [Citation Index Journal]