Items where Author is "Al-Sabaeei, A.M."

Group by: Item Type | No Grouping
Number of items: 31.

Khan, M.I. and Sutanto, M.H. and Khahro, S.H. and Zoorob, S.E. and Md. Yusoff, N.I. and Al-Sabaeei, A.M. and Javed, Y. (2023) Fatigue Prediction Model and Stiffness Modulus for Semi-Flexible Pavement Surfacing Using Irradiated Waste Polyethylene Terephthalate-Based Cement Grouts. Coatings, 13 (1). ISSN 20796412

Al-Sabaeei, A.M. and Alhussian, H. and Abdulkadir, S.J. and Jagadeesh, A. (2023) Prediction of oil and gas pipeline failures through machine learning approaches: A systematic review. Energy Reports, 10. pp. 1313-1338. ISSN 23524847

Memon, A.M. and Sutanto, M.H. and Yusoff, N.I.M. and Memon, R.A. and Khan, M.I. and Al-Sabaeei, A.M. (2023) Rheological modeling and microstructural evaluation of oily sludge modified bitumen. Case Studies in Construction Materials, 18. ISSN 22145095

Al-Sabaeei, A.M. and Alhussian, H. and Abdulkadir, S.J. and Giustozzi, F. and Napiah, M. and Jagadeesh, A. and Sutanto, M. and Memon, A.M. (2023) Utilization of response surface methodology and machine learning for predicting and optimizing mixing and compaction temperatures of bio-modified asphalt. Case Studies in Construction Materials, 18. ISSN 22145095

Al-Sabaeei, A.M. and Safaeldeen, G.I. and Napiah, M. (2023) Utilization of response surface methodology for predicting and optimizing the physical properties of rubberized asphalt modified with nanosilica and waste denim fiber. Cleaner Engineering and Technology, 15. ISSN 26667908

Rahmad, S. and Khahro, S.H. and Rosyidi, S.A.P. and Widyatmoko, I. and Memon, N.A. and Al-Sabaeei, A.M. and Milad, A. and Sutanto, M.H. and Yusoff, N.I.M. (2022) Assessment of metal leaching from rediset-polymer modified asphalt binder on groundwater and soil contamination. Case Studies in Construction Materials, 16.

Milad, A. and Babalghaith, A.M. and Al-Sabaeei, A.M. and Dulaimi, A. and Ali, A. and Reddy, S.S. and Bilema, M. and Yusoff, N.I.M. (2022) A Comparative Review of Hot and Warm Mix Asphalt Technologies from Environmental and Economic Perspectives: Towards a Sustainable Asphalt Pavement. International Journal of Environmental Research and Public Health, 19 (22).

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2022) Feasibility Evaluation of Waste Palm Oil Clinker Powder as a Fillers Substitute for Eco-Friendly Hot Mix Asphalt Pavement. International Journal of Pavement Research and Technology. ISSN 19966814

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zoorob, S.E. and Usman, A. (2022) Influence of nanosilica particles on the high-temperature performance of waste denim fibre-modified bitumen. International Journal of Pavement Engineering, 23 (2). pp. 207-220.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2022) Mixture Design-Based Performance Optimization via Response Surface Methodology and Moisture Durability Study for Palm Oil Clinker Fine Modified Bitumen Asphalt Mixtures. International Journal of Pavement Research and Technology.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2022) Mixture Design-Based Performance Optimization via Response Surface Methodology and Moisture Durability Study for Palm Oil Clinker Fine Modified Bitumen Asphalt Mixtures. International Journal of Pavement Research and Technology. ISSN 19966814

Al-Sabaeei, A.M. and Napiah, M. and Al Salaheen, M. and Badri, R.M. and Noura, S. and Khan, M.I. and Al-Bahr, T.M. and Alzubi, K. (2022) Optimizing the Physical Properties of Waste Denim Fiber-Modified Rubberized Bitumen Through Response Surface Methodology. In: UNSPECIFIED.

Babashamsi, P. and Khahro, S.H. and Omar, H.A. and Al-Sabaeei, A.M. and Memon, A.M. and Milad, A. and Khan, M.I. and Sutanto, M.H. and Yusoff, N.I.M. (2022) Perspective of Life-Cycle Cost Analysis and Risk Assessment for Airport Pavement in Delaying Preventive Maintenance. Sustainability (Switzerland), 14 (5).

Al-Sabaeei, A.M. and Al-Fakih, A. and Noura, S. and Yaghoubi, E. and Alaloul, W. and Al-Mansob, R.A. and Imran Khan, M. and Aliyu Yaro, N.S. (2022) Utilization of palm oil and its by-products in bio-asphalt and bio-concrete mixtures: A review. Construction and Building Materials, 337.

Murali, M. and Alaloul, W.S. and Mohammed, B.S. and Musarat, M.A. and Salaheen, M.A. and Al-Sabaeei, A.M. and Isyaka, A. (2022) Utilizing graphene oxide in cementitious composites: A systematic review. Case Studies in Construction Materials, 17.

Usman, A. and Sutanto, M.H. and Napiah, M. and Al-Sabaeei, A.M. and Yaro, N.S.A. and Kumalasari, I. and Saeed, S.M. (2022) Waste Polyethylene Terephthalate granules modified by gamma irradiation and their effect as fine aggregates on moisture damage of asphalt mixtures. In: UNSPECIFIED.

Mabrouk, G.M. and Alrashydah, E. and Masad, A. and Elbagalati, O. and Al-Sabaeei, A.M. and Dessouky, S. and Fuentes, L. and Walubita, L. (2022) A statistical approach for pavement layer moduli backcalculation as a function of traffic speed deflections. Innovative Infrastructure Solutions, 7 (5).

Noura, S. and Al-Sabaeei, A.M. and Safaeldeen, G.I. and Muniandy, R. and Carter, A. (2021) Evaluation of measured and predicted resilient modulus of rubberized Stone Mastic Asphalt (SMA) modified with truck tire rubber powder. Case Studies in Construction Materials, 15.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Yusoff, N.I.M. and Khairuddin, F.H. and Memon, A.M. (2021) Evaluation of the high-temperature rheological performance of tire pyrolysis oil-modified bio-asphalt. International Journal of Pavement Engineering.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Yusoff, N.I.M. and Khairuddin, F.H. and Memon, A.M. (2021) Evaluation of the high-temperature rheological performance of tire pyrolysis oil-modified bio-asphalt. International Journal of Pavement Engineering.

Al-Sabaeei, A.M. and Napiah, M. and Sutanto, M. and Alaloul, W. and Md Yusoff, N.I. and Imran Khan, M. and Modibbo Saeed, S. (2021) Physicochemical, rheological and microstructural properties of Nano-Silica modified Bio-Asphalt. Construction and Building Materials, 297.

Memon, A.M. and Sutanto, M.H. and Napiah, M. and Yusoff, N.I.M. and Memon, R.A. and Al-Sabaeei, A.M. and Ali, M. (2021) Physicochemical, rheological and morphological properties of bitumen incorporating petroleum sludge. Construction and Building Materials, 297.

Al-Bahr, T. and Puan, O.C. and Hassan, S.A. and Azhari, S.F. and Al-Sabaeei, A.M. and Mohammed, H.A. (2021) Statistical Evaluation of Moving Observer Method Accuracy for Measuring Traffic Flow Variables on Urban Roads. In: UNSPECIFIED.

Salah Alaloul, W. and Al Salaheen, M. and Malkawi, A.B. and Alzubi, K. and Al-Sabaeei, A.M. and Ali Musarat, M. (2021) Utilizing of oil shale ash as a construction material: A systematic review. Construction and Building Materials, 299.

Al-Sabaeei, A.M. and Mustofa, B.A. and Sutanto, M.H. and Sunarjono, S. and Bala, N. (2020) Aging and rheological properties of latex and crumb rubber modified bitumen using dynamic shear rheometer. Journal of Engineering and Technological Sciences, 52 (3). pp. 385-398.

Ghaleb, A.A.S. and Kutty, S.R.M. and Ho, Y.C. and Jagaba, A.H. and Noor, A. and Al-Sabaeei, A.M. and Kumar, V. and Saeed, A.A.H. (2020) Anaerobic co-digestion for oily-biological sludge with sugarcane bagasse for biogas production under mesophilic condition. In: UNSPECIFIED.

Ghaleb, A.A.S. and Kutty, S.R.M. and Ho, Y.C. and Jagaba, A.H. and Noor, A. and Al-Sabaeei, A.M. and Kumar, V. and Saeed, A.A.H. (2020) Anaerobic co-digestion for oily-biological sludge with sugarcane bagasse for biogas production under mesophilic condition. In: UNSPECIFIED.

Lim, J.R. and Kutty, S.R.M. and Ghaleb, A.A.S. and Almahbashi, N.M.Y. and Al-Sabaeei, A.M. (2020) Development of dead-end system calculation model for water reticulation design using Microsoft Excel with optimized algorithm: A case study at regional operations center (ROC) Melaka, Malaysia. In: UNSPECIFIED.

Lim, J.R. and Kutty, S.R.M. and Ghaleb, A.A.S. and Almahbashi, N.M.Y. and Al-Sabaeei, A.M. (2020) Development of dead-end system calculation model for water reticulation design using Microsoft Excel with optimized algorithm: A case study at regional operations center (ROC) Melaka, Malaysia. In: UNSPECIFIED.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zoorob, S.E. and Usman, A. (2020) Influence of nanosilica particles on the high-temperature performance of waste denim fibre-modified bitumen. International Journal of Pavement Engineering.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Usman, A. (2020) A systematic review of bio-asphalt for flexible pavement applications: Coherent taxonomy, motivations, challenges and future directions. Journal of Cleaner Production, 249.

This list was generated on Fri Mar 29 19:56:54 2024 +08.