Coupled Analytical-Numerical Procedure to Solve the Double Wedge Spiked Supersonic Intake Flow Field
| Periodical | Applied Mechanics and Materials (Volume 225) |
|---|---|
| Main Theme | AEROTECH IV |
| Edited by | R. Varatharajoo, E. J. Abdullah, D. L. Majid, F. I. Romli, A. S. Mohd Rafie and K. A. Ahmad |
| Pages | 67-72 |
| DOI | 10.4028/www.scientific.net/AMM.225.67 |
| Citation | Hussain H. Al-Kayiem et al., 2012, Applied Mechanics and Materials, 225, 67 |
| Online since | November, 2012 |
| Authors | Hussain H. Al-Kayiem, Tawfeeq W. Salih, Dhinakaran Govindasamy |
| Keywords | Aeroengine, Compressible Flow, Spike, Supersonic Flow, Supersonic Inlet |
| Price | US$ 28,- |
Designers of the aero engines are in quest of maintaining the pressure as high as possible at the face of the compressor, with air velocity not higher than 0.8 Mach. Reduction of the flow from supersonic to such speed is combined with pressure reduction. This paper presents results from coupled techniques to solve for the flow field of double wedge spiked supersonic intake. The selected spike has 4° forebody wedge angle and the second ramp angle is 8°. The external part of the flow was solved analytically while the internal part was solved numerically by finite volume technique. The analysis was carried out at different Mach numbers (1.4, 1.8, 2.2, 2.4, and 3) and different angles of attack (0°, 6°, and 12°). The procedure is validated and the results are presented in terms of the pressure recovery at the face of the compressor. The results have shown that generally the pressure recovery decreases by increasing of incidence angle. The non-zero incidence was found to produce noticeable difference in pressure distribution at the face of the compressor. This became considerably effective at incidences leading to detached shocks at the leading edge of the spike.
