Logo

Fabrication of high magnetic performance Fe�50Ni alloy by powder injection molding

Ali, M. and Ahmad, F. and Malik, M.R.R. and Niazi, A.R. (2020) Fabrication of high magnetic performance Fe�50Ni alloy by powder injection molding. Materials and Manufacturing Processes, 35 (14). pp. 1557-1566.

Full text not available from this repository.

Official URL: https://www.scopus.com/inward/record.uri?eid=2-s2....

Abstract

Fe�50Ni alloy is widely used for soft magnetic applications due to attractive magnetic properties. In this study, Fe�50Ni soft magnetic alloy was produced by powder injection molding. The influence of sintering parameters was investigated on the density, grain size, and magnetic properties. The injected parts were sintered at 1300�1375°C for 2�14 h with subsequent controlled slow cooling. It has found that permeability and magnetic induction improved with increasing sintering time and temperature, whereas the coercivity was reduced significantly. The sintered density and grain size of 98 and 240 µm were obtained in this study. Consequently, excellent magnetic properties of Fe�50Ni were achieved. The values of magnetic permeability and saturation induction were 50,240 and 1.52 T, respectively. © 2020 Taylor & Francis.

Item Type:Article
Impact Factor:cited By 0
Uncontrolled Keywords:Grain size and shape; Magnetic materials; Magnetic permeability; Magnetism; Powder metallurgy; Sintering, Magnetic performance; Powder injection molding; Saturation induction; Sintered density; Sintering parameters; Sintering time; Soft magnetic alloys; Soft magnetics, Injection molding
ID Code:23277
Deposited By: Ms Sharifah Fahimah Saiyed Yeop
Deposited On:19 Aug 2021 07:26
Last Modified:19 Aug 2021 07:26

Repository Staff Only: item control page