Logo

Tackling membrane fouling in microalgae filtration using nylon 6,6 nanofiber membrane

Bilad, M.R. and Azizo, A.S. and Wirzal, M.D.H. and Jia Jia, L. and Putra, Z.A. and Nordin, N.A.H.M. and Mavukkandy, M.O. and Jasni, M.J.F. and Yusoff, A.R.M. (2018) Tackling membrane fouling in microalgae filtration using nylon 6,6 nanofiber membrane. Journal of Environmental Management, 223 . pp. 23-28.

Full text not available from this repository.

Official URL: https://www.scopus.com/inward/record.uri?eid=2-s2....

Abstract

Microalgae technology, if managed properly, has promising roles in solving food-water-energy nexus. The Achilles� heel is, however, to lower the costs associated with cultivation and harvesting. As a favorable technique, application of membrane process is strongly limited by membrane fouling. This study evaluates performance of nylon 6,6 nanofiber membrane (NFM) to a conventional polyvinylidene fluoride phase inverted membrane (PVDF PIM) for filtration of Chlorella vulgaris. Results show that nylon 6,6 NFM is superhydrophilic, has higher size of pore opening (0.22 vs 0.18 μm) and higher surface pore density (23 vs 18 pores/μm2) leading to higher permeance (1018 vs 493 L/m2hbar) and better fouling resistant. Such advantages help to outperform the filterability of PVDF PIM by showing much higher steady-state permeance (286 vs 120 L/m2hbar), with comparable biomass retention. In addition, unlike for PVDF PIM, imposing longer relaxation cycles further enhances the performance of the NFM (i.e., 178 L/m2hbar for 0.5 min and 236 L/m2hbar for 5 min). Overall findings confirm the advantages of nylon 6,6 NFM over the PVDF PIM. Such advantages can help to reduce required membrane area and specific aeration demand by enabling higher flux and lowering aeration rate. Nevertheless, developments of nylon 6,6 NFM material with respect to its intrinsic properties, mechanical strength and operational conditions of the panel can still be explored to enhance its competitiveness as a promising fouling resistant membrane material for microalgae filtration. © 2018 Elsevier Ltd

Item Type:Article
Impact Factor:cited By 0
Uncontrolled Keywords:nanofiber; nylon; polyvinylidene fluoride, aeration; filtration; membrane; microalga; nanoparticle; operations technology; performance assessment; polymer, aeration; Article; Chlorella vulgaris; comparative study; controlled study; density; filter cake; fouling control; hydraulic conductivity; membrane permeability; microbial biomass; nanofiltration; steady state; surface property; water permeability, Chlorella vulgaris
Departments / MOR / COE:Research Institutes > Institute for Sustainable Building
ID Code:21404
Deposited By: Ahmad Suhairi
Deposited On:25 Sep 2018 06:35
Last Modified:07 Jan 2019 07:24

Repository Staff Only: item control page